net/mlx5: fix call to modify action without init item
Checks
Commit Message
The item is being set according to the attribute value, whether it is
udp/tcp or ipv4/6.
Also, there are two condition calls.
If the attribute is neither udp/tcp or ipv4/6 the item is not initialized
at all, but the call to the flow_dv_convert_modify_action is still being
done.
Also, even if the attribute is tcp/udp or ipv4/6, we still have two
conditions.
This patch changes the conditions, so the item will always be set.
By doing this, there is also a save in the number of condition calls.
Fixes: 4bb14c83 ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Dekel Peled <dekelp@mellanox.com>
---
drivers/net/mlx5/mlx5_flow_dv.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
Comments
From: Asaf Penso
> The item is being set according to the attribute value, whether it is udp/tcp or
> ipv4/6.
> Also, there are two condition calls.
>
> If the attribute is neither udp/tcp or ipv4/6 the item is not initialized at all, but
> the call to the flow_dv_convert_modify_action is still being done.
> Also, even if the attribute is tcp/udp or ipv4/6, we still have two conditions.
>
> This patch changes the conditions, so the item will always be set.
> By doing this, there is also a save in the number of condition calls.
>
> Fixes: 4bb14c83 ("net/mlx5: support modify header using Direct Verbs")
> Cc: stable@dpdk.org
>
> Signed-off-by: Asaf Penso <asafp@mellanox.com>
> Reviewed-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Asaf Penso
> Sent: Wednesday, March 25, 2020 9:53 PM
> To: dev@dpdk.org
> Cc: Slava Ovsiienko <viacheslavo@mellanox.com>; Matan Azrad
> <matan@mellanox.com>; Dekel Peled <dekelp@mellanox.com>;
> stable@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/mlx5: fix call to modify action without init
> item
>
> The item is being set according to the attribute value, whether it is
> udp/tcp or ipv4/6.
> Also, there are two condition calls.
>
> If the attribute is neither udp/tcp or ipv4/6 the item is not initialized
> at all, but the call to the flow_dv_convert_modify_action is still being
> done.
> Also, even if the attribute is tcp/udp or ipv4/6, we still have two
> conditions.
>
> This patch changes the conditions, so the item will always be set.
> By doing this, there is also a save in the number of condition calls.
>
> Fixes: 4bb14c83 ("net/mlx5: support modify header using Direct Verbs")
> Cc: stable@dpdk.org
>
> Signed-off-by: Asaf Penso <asafp@mellanox.com>
> Reviewed-by: Dekel Peled <dekelp@mellanox.com>
> ---
> drivers/net/mlx5/mlx5_flow_dv.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c
> b/drivers/net/mlx5/mlx5_flow_dv.c
> index 809833b..eabc745 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -702,8 +702,8 @@ struct field_modify_info modify_tcp[] = {
> item.spec = &udp;
> item.mask = &udp_mask;
> field = modify_udp;
> - }
> - if (attr->tcp) {
> + } else {
> + MLX5_ASSERT(attr->tcp);
> memset(&tcp, 0, sizeof(tcp));
> memset(&tcp_mask, 0, sizeof(tcp_mask));
> if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
> @@ -773,8 +773,8 @@ struct field_modify_info modify_tcp[] = {
> item.spec = &ipv4;
> item.mask = &ipv4_mask;
> field = modify_ipv4;
> - }
> - if (attr->ipv6) {
> + } else {
> + MLX5_ASSERT(attr->ipv6);
> memset(&ipv6, 0, sizeof(ipv6));
> memset(&ipv6_mask, 0, sizeof(ipv6_mask));
> ipv6.hdr.hop_limits = conf->ttl_value;
> @@ -834,8 +834,8 @@ struct field_modify_info modify_tcp[] = {
> item.spec = &ipv4;
> item.mask = &ipv4_mask;
> field = modify_ipv4;
> - }
> - if (attr->ipv6) {
> + } else {
> + MLX5_ASSERT(attr->ipv6);
> memset(&ipv6, 0, sizeof(ipv6));
> memset(&ipv6_mask, 0, sizeof(ipv6_mask));
> ipv6.hdr.hop_limits = 0xFF;
> --
> 1.8.3.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
@@ -702,8 +702,8 @@ struct field_modify_info modify_tcp[] = {
item.spec = &udp;
item.mask = &udp_mask;
field = modify_udp;
- }
- if (attr->tcp) {
+ } else {
+ MLX5_ASSERT(attr->tcp);
memset(&tcp, 0, sizeof(tcp));
memset(&tcp_mask, 0, sizeof(tcp_mask));
if (action->type == RTE_FLOW_ACTION_TYPE_SET_TP_SRC) {
@@ -773,8 +773,8 @@ struct field_modify_info modify_tcp[] = {
item.spec = &ipv4;
item.mask = &ipv4_mask;
field = modify_ipv4;
- }
- if (attr->ipv6) {
+ } else {
+ MLX5_ASSERT(attr->ipv6);
memset(&ipv6, 0, sizeof(ipv6));
memset(&ipv6_mask, 0, sizeof(ipv6_mask));
ipv6.hdr.hop_limits = conf->ttl_value;
@@ -834,8 +834,8 @@ struct field_modify_info modify_tcp[] = {
item.spec = &ipv4;
item.mask = &ipv4_mask;
field = modify_ipv4;
- }
- if (attr->ipv6) {
+ } else {
+ MLX5_ASSERT(attr->ipv6);
memset(&ipv6, 0, sizeof(ipv6));
memset(&ipv6_mask, 0, sizeof(ipv6_mask));
ipv6.hdr.hop_limits = 0xFF;