[v3] build: alias default build as generic
Checks
Commit Message
The current machine='default' build name is not descriptive. The actual
default build is machine='native'. Add an alternative string which does
the same build and better describes what we're building:
machine='generic'. Leave machine='default' for backwards compatibility.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
config/arm/meson.build | 7 ++++---
config/meson.build | 13 +++++++------
devtools/test-meson-builds.sh | 14 +++++++-------
doc/guides/prog_guide/build-sdk-meson.rst | 4 ++--
meson_options.txt | 2 +-
5 files changed, 21 insertions(+), 19 deletions(-)
Comments
Hi Thomas, David,
Is there anything missing in this patch? We have some acks and reviewed-by. Maybe add more documentation? If so, where?
Thanks,
Juuraj
> -----Original Message-----
> From: Juraj Linkeš <juraj.linkes@pantheon.tech>
> Sent: Thursday, February 18, 2021 3:13 PM
> To: bruce.richardson@intel.com; thomas@monjalon.net;
> Ruifeng.Wang@arm.com; Honnappa.Nagarahalli@arm.com;
> jerinjacobk@gmail.com; ferruh.yigit@intel.com
> Cc: dev@dpdk.org; Juraj Linkeš <juraj.linkes@pantheon.tech>
> Subject: [PATCH v3] build: alias default build as generic
>
> The current machine='default' build name is not descriptive. The actual default
> build is machine='native'. Add an alternative string which does the same build
> and better describes what we're building:
> machine='generic'. Leave machine='default' for backwards compatibility.
>
> Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
> ---
> config/arm/meson.build | 7 ++++---
> config/meson.build | 13 +++++++------
> devtools/test-meson-builds.sh | 14 +++++++-------
> doc/guides/prog_guide/build-sdk-meson.rst | 4 ++--
> meson_options.txt | 2 +-
> 5 files changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/config/arm/meson.build b/config/arm/meson.build index
> 00bc4610a3..aaed89bd5b 100644
> --- a/config/arm/meson.build
> +++ b/config/arm/meson.build
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: BSD-3-Clause # Copyright(c) 2017 Intel Corporation.
> # Copyright(c) 2017 Cavium, Inc
> +# Copyright(c) 2021 PANTHEON.tech s.r.o.
>
> # common flags to all aarch64 builds, with lowest priority flags_common = [
> @@ -208,8 +209,8 @@ if dpdk_conf.get('RTE_ARCH_32') else
> # aarch64 build
> if not meson.is_cross_build()
> - if machine == 'default'
> - # default build
> + if machine == 'generic'
> + # generic build
> implementer_id = 'generic'
> part_number = 'generic'
> else
> @@ -256,7 +257,7 @@ else
> '(-Dmachine=generic) build.')
> endif
>
> - # use default flags with implementer flags
> + # use common flags with implementer flags
> dpdk_flags = flags_common + implementer_config['flags'] +
> part_number_config.get('flags', [])
>
> # apply supported machine args
> diff --git a/config/meson.build b/config/meson.build index
> 3cf560b8a3..ed4de62b37 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -70,21 +70,22 @@ else
> machine = get_option('machine')
> endif
>
> -# machine type 'default' is special, it defaults to the per arch agreed common -#
> minimal baseline needed for DPDK.
> +# machine type 'generic' is special, it selects the per arch agreed
> +common # minimal baseline needed for DPDK. Machine type 'default' is
> +also supported # with the same meaning for backwards compatibility.
> # That might not be the most optimized, but the most portable version while #
> still being able to support the CPU features required for DPDK.
> # This can be bumped up by the DPDK project, but it can never be an # invariant
> like 'native'
> -if machine == 'default'
> +if machine == 'default' or machine == 'generic'
> if host_machine.cpu_family().startswith('x86')
> - # matches the old pre-meson build systems default
> + # matches the old pre-meson build systems generic machine
> machine = 'corei7'
> elif host_machine.cpu_family().startswith('arm')
> machine = 'armv7-a'
> elif host_machine.cpu_family().startswith('aarch')
> - # arm64 manages defaults in config/arm/meson.build
> - machine = 'default'
> + # arm64 manages generic config in config/arm/meson.build
> + machine = 'generic'
> elif host_machine.cpu_family().startswith('ppc')
> machine = 'power8'
> endif
> diff --git a/devtools/test-meson-builds.sh b/devtools/test-meson-builds.sh index
> c11ae87e0d..daf817ac3e 100755
> --- a/devtools/test-meson-builds.sh
> +++ b/devtools/test-meson-builds.sh
> @@ -223,12 +223,12 @@ done
> # test compilation with minimal x86 instruction set # Set the install path for
> libraries to "lib" explicitly to prevent problems # with pkg-config prefixes if
> installed in "lib/x86_64-linux-gnu" later.
> -default_machine='nehalem'
> -if ! check_cc_flags "-march=$default_machine" ; then
> - default_machine='corei7'
> +generic_machine='nehalem'
> +if ! check_cc_flags "-march=$generic_machine" ; then
> + generic_machine='corei7'
> fi
> -build build-x86-default cc skipABI -Dcheck_includes=true \
> - -Dlibdir=lib -Dmachine=$default_machine $use_shared
> +build build-x86-generic cc skipABI -Dcheck_includes=true \
> + -Dlibdir=lib -Dmachine=$generic_machine $use_shared
>
> # 32-bit with default compiler
> if check_cc_flags '-m32' ; then
> @@ -271,10 +271,10 @@ for f in $srcdir/config/ppc/ppc* ; do
> build $targetdir $f ABI $use_shared
> done
>
> -# Test installation of the x86-default target, to be used for checking
> +# Test installation of the x86-generic target, to be used for checking
> # the sample apps build using the pkg-config file for cflags and libs load_env cc
> -build_path=$(readlink -f $builds_dir/build-x86-default)
> +build_path=$(readlink -f $builds_dir/build-x86-generic)
> export DESTDIR=$build_path/install
> install_target $build_path $DESTDIR
> pc_file=$(find $DESTDIR -name libdpdk.pc) diff --git
> a/doc/guides/prog_guide/build-sdk-meson.rst b/doc/guides/prog_guide/build-
> sdk-meson.rst
> index 3429e26479..c7e12eedfb 100644
> --- a/doc/guides/prog_guide/build-sdk-meson.rst
> +++ b/doc/guides/prog_guide/build-sdk-meson.rst
> @@ -85,7 +85,7 @@ Project-specific options are passed used -Doption=value::
>
> meson -Denable_docs=true fullbuild # build and install docs
>
> - meson -Dmachine=default # use builder-independent baseline -march
> + meson -Dmachine=generic # use builder-independent baseline -march
>
> meson -Ddisable_drivers=event/*,net/tap # disable tap driver and all
> # eventdev PMDs for a smaller build
> @@ -114,7 +114,7 @@ Examples of setting some of the same options using
> meson configure::
> re-scan from meson.
>
> .. note::
> - machine=default uses a config that works on all supported architectures
> + machine=generic uses a config that works on all supported
> + architectures
> regardless of the capabilities of the machine where the build is happening.
>
> As well as those settings taken from ``meson configure``, other options diff --git
> a/meson_options.txt b/meson_options.txt index 6eff62e47d..2c7b46ef07
> 100644
> --- a/meson_options.txt
> +++ b/meson_options.txt
> @@ -21,7 +21,7 @@ option('include_subdir_arch', type: 'string', value: '',
> option('kernel_dir', type: 'string', value: '',
> description: 'Path to the kernel for building kernel modules. Headers
> must be in $kernel_dir/build. Modules will be installed in
> $DEST_DIR/$kernel_dir/extra/dpdk.')
> option('machine', type: 'string', value: 'native',
> - description: 'set the target machine type')
> + description: 'set the target machine type or "generic", a build usable
> +on all machines of the build machine architecture or "native", which
> +lets the compiler pick the architecture of the build machine.')
> option('max_ethports', type: 'integer', value: 32,
> description: 'maximum number of Ethernet devices')
> option('max_lcores', type: 'integer', value: 128,
> --
> 2.20.1
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation.
# Copyright(c) 2017 Cavium, Inc
+# Copyright(c) 2021 PANTHEON.tech s.r.o.
# common flags to all aarch64 builds, with lowest priority
flags_common = [
@@ -208,8 +209,8 @@ if dpdk_conf.get('RTE_ARCH_32')
else
# aarch64 build
if not meson.is_cross_build()
- if machine == 'default'
- # default build
+ if machine == 'generic'
+ # generic build
implementer_id = 'generic'
part_number = 'generic'
else
@@ -256,7 +257,7 @@ else
'(-Dmachine=generic) build.')
endif
- # use default flags with implementer flags
+ # use common flags with implementer flags
dpdk_flags = flags_common + implementer_config['flags'] + part_number_config.get('flags', [])
# apply supported machine args
@@ -70,21 +70,22 @@ else
machine = get_option('machine')
endif
-# machine type 'default' is special, it defaults to the per arch agreed common
-# minimal baseline needed for DPDK.
+# machine type 'generic' is special, it selects the per arch agreed common
+# minimal baseline needed for DPDK. Machine type 'default' is also supported
+# with the same meaning for backwards compatibility.
# That might not be the most optimized, but the most portable version while
# still being able to support the CPU features required for DPDK.
# This can be bumped up by the DPDK project, but it can never be an
# invariant like 'native'
-if machine == 'default'
+if machine == 'default' or machine == 'generic'
if host_machine.cpu_family().startswith('x86')
- # matches the old pre-meson build systems default
+ # matches the old pre-meson build systems generic machine
machine = 'corei7'
elif host_machine.cpu_family().startswith('arm')
machine = 'armv7-a'
elif host_machine.cpu_family().startswith('aarch')
- # arm64 manages defaults in config/arm/meson.build
- machine = 'default'
+ # arm64 manages generic config in config/arm/meson.build
+ machine = 'generic'
elif host_machine.cpu_family().startswith('ppc')
machine = 'power8'
endif
@@ -223,12 +223,12 @@ done
# test compilation with minimal x86 instruction set
# Set the install path for libraries to "lib" explicitly to prevent problems
# with pkg-config prefixes if installed in "lib/x86_64-linux-gnu" later.
-default_machine='nehalem'
-if ! check_cc_flags "-march=$default_machine" ; then
- default_machine='corei7'
+generic_machine='nehalem'
+if ! check_cc_flags "-march=$generic_machine" ; then
+ generic_machine='corei7'
fi
-build build-x86-default cc skipABI -Dcheck_includes=true \
- -Dlibdir=lib -Dmachine=$default_machine $use_shared
+build build-x86-generic cc skipABI -Dcheck_includes=true \
+ -Dlibdir=lib -Dmachine=$generic_machine $use_shared
# 32-bit with default compiler
if check_cc_flags '-m32' ; then
@@ -271,10 +271,10 @@ for f in $srcdir/config/ppc/ppc* ; do
build $targetdir $f ABI $use_shared
done
-# Test installation of the x86-default target, to be used for checking
+# Test installation of the x86-generic target, to be used for checking
# the sample apps build using the pkg-config file for cflags and libs
load_env cc
-build_path=$(readlink -f $builds_dir/build-x86-default)
+build_path=$(readlink -f $builds_dir/build-x86-generic)
export DESTDIR=$build_path/install
install_target $build_path $DESTDIR
pc_file=$(find $DESTDIR -name libdpdk.pc)
@@ -85,7 +85,7 @@ Project-specific options are passed used -Doption=value::
meson -Denable_docs=true fullbuild # build and install docs
- meson -Dmachine=default # use builder-independent baseline -march
+ meson -Dmachine=generic # use builder-independent baseline -march
meson -Ddisable_drivers=event/*,net/tap # disable tap driver and all
# eventdev PMDs for a smaller build
@@ -114,7 +114,7 @@ Examples of setting some of the same options using meson configure::
re-scan from meson.
.. note::
- machine=default uses a config that works on all supported architectures
+ machine=generic uses a config that works on all supported architectures
regardless of the capabilities of the machine where the build is happening.
As well as those settings taken from ``meson configure``, other options
@@ -21,7 +21,7 @@ option('include_subdir_arch', type: 'string', value: '',
option('kernel_dir', type: 'string', value: '',
description: 'Path to the kernel for building kernel modules. Headers must be in $kernel_dir/build. Modules will be installed in $DEST_DIR/$kernel_dir/extra/dpdk.')
option('machine', type: 'string', value: 'native',
- description: 'set the target machine type')
+ description: 'set the target machine type or "generic", a build usable on all machines of the build machine architecture or "native", which lets the compiler pick the architecture of the build machine.')
option('max_ethports', type: 'integer', value: 32,
description: 'maximum number of Ethernet devices')
option('max_lcores', type: 'integer', value: 128,