[v2,1/1] test/ring: remove excessive inlining

  Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause
the compiled code to grow extensively when compiled with no optimization
(-O0 or -Og). This is default in the meson's debug configuration. This
can collide with compiler bugs and cause issues during linking of unit
tests where the api_type or esize are non-const variables causing
inlining cascade. In perf tests this is not the case in perf-tests as
esize and api_type are const values.

One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and
no fix still in 12.1) is generating a short relative jump instruction
(J <offset>) for goto and for loops. When loop body grows extensively in
ring test, the target offset goes beyond supported offfset of +/- 1MB
from PC. This is an obvious bug in the GCC as RISC-V has a
two-instruction construct to jump to any absolute address (AUIPC+JALR).

However there is no reason to force inlining as the test code works
perfectly fine without it.

GCC has a bug report for a similar case (with conditionals):
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062

Fixes: a9fe152363 test/ring: add custom element size functional tests

Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
---
 app/test/test_ring.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
  

On Wed, May 11, 2022 at 05:07:25PM +0200, Stanislaw Kardach wrote:
> Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause
> the compiled code to grow extensively when compiled with no optimization
> (-O0 or -Og). This is default in the meson's debug configuration. This
> can collide with compiler bugs and cause issues during linking of unit
> tests where the api_type or esize are non-const variables causing
> inlining cascade. In perf tests this is not the case in perf-tests as
> esize and api_type are const values.
> 
> One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and
> no fix still in 12.1) is generating a short relative jump instruction
> (J <offset>) for goto and for loops. When loop body grows extensively in
> ring test, the target offset goes beyond supported offfset of +/- 1MB
> from PC. This is an obvious bug in the GCC as RISC-V has a
> two-instruction construct to jump to any absolute address (AUIPC+JALR).
> 
> However there is no reason to force inlining as the test code works
> perfectly fine without it.
> 
> GCC has a bug report for a similar case (with conditionals):
> https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062
> 
> Fixes: a9fe152363 test/ring: add custom element size functional tests
> 
> Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
  

<snip>
> 
> Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause the
> compiled code to grow extensively when compiled with no optimization
> (-O0 or -Og). This is default in the meson's debug configuration. This can collide
> with compiler bugs and cause issues during linking of unit tests where the
> api_type or esize are non-const variables causing inlining cascade. In perf tests
> this is not the case in perf-tests as esize and api_type are const values.
> 
> One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and no
> fix still in 12.1) is generating a short relative jump instruction (J <offset>) for
> goto and for loops. When loop body grows extensively in ring test, the target
> offset goes beyond supported offfset of +/- 1MB from PC. This is an obvious
> bug in the GCC as RISC-V has a two-instruction construct to jump to any
> absolute address (AUIPC+JALR).
> 
> However there is no reason to force inlining as the test code works perfectly
> fine without it.
> 
> GCC has a bug report for a similar case (with conditionals):
> https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062
> 
> Fixes: a9fe152363 test/ring: add custom element size functional tests
> 
> Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
  

11/05/2022 16:07, Stanislaw Kardach пишет:
> Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause
> the compiled code to grow extensively when compiled with no optimization
> (-O0 or -Og). This is default in the meson's debug configuration. This
> can collide with compiler bugs and cause issues during linking of unit
> tests where the api_type or esize are non-const variables causing
> inlining cascade. In perf tests this is not the case in perf-tests as
> esize and api_type are const values.
> 
> One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and
> no fix still in 12.1) is generating a short relative jump instruction
> (J <offset>) for goto and for loops. When loop body grows extensively in
> ring test, the target offset goes beyond supported offfset of +/- 1MB
> from PC. This is an obvious bug in the GCC as RISC-V has a
> two-instruction construct to jump to any absolute address (AUIPC+JALR).
> 
> However there is no reason to force inlining as the test code works
> perfectly fine without it.
> 
> GCC has a bug report for a similar case (with conditionals):
> https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062
> 
> Fixes: a9fe152363 test/ring: add custom element size functional tests
> 
> Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
> ---
>   app/test/test_ring.h | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/app/test/test_ring.h b/app/test/test_ring.h
> index c8bfec8399..45c263f3ff 100644
> --- a/app/test/test_ring.h
> +++ b/app/test/test_ring.h
> @@ -97,7 +97,7 @@ test_ring_copy_from(struct rte_ring_zc_data *zcd, void *dst, int esize,
>   	}
>   }
>   
> -static __rte_always_inline unsigned int
> +static inline unsigned int
>   test_ring_enqueue(struct rte_ring *r, void **obj, int esize, unsigned int n,
>   			unsigned int api_type)
>   {
> @@ -158,7 +158,7 @@ test_ring_enqueue(struct rte_ring *r, void **obj, int esize, unsigned int n,
>   		}
>   }
>   
> -static __rte_always_inline unsigned int
> +static inline unsigned int
>   test_ring_dequeue(struct rte_ring *r, void **obj, int esize, unsigned int n,
>   			unsigned int api_type)
>   {
> @@ -222,7 +222,7 @@ test_ring_dequeue(struct rte_ring *r, void **obj, int esize, unsigned int n,
>   /* This function is placed here as it is required for both
>    * performance and functional tests.
>    */
> -static __rte_always_inline void *
> +static inline void *
>   test_ring_calloc(unsigned int rsize, int esize)
>   {
>   	unsigned int sz;

Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
  

On Wed, May 11, 2022 at 5:49 PM Bruce Richardson
<bruce.richardson@intel.com> wrote:
>
> On Wed, May 11, 2022 at 05:07:25PM +0200, Stanislaw Kardach wrote:
> > Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause
> > the compiled code to grow extensively when compiled with no optimization
> > (-O0 or -Og). This is default in the meson's debug configuration. This
> > can collide with compiler bugs and cause issues during linking of unit
> > tests where the api_type or esize are non-const variables causing
> > inlining cascade. In perf tests this is not the case in perf-tests as
> > esize and api_type are const values.
> >
> > One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and
> > no fix still in 12.1) is generating a short relative jump instruction
> > (J <offset>) for goto and for loops. When loop body grows extensively in
> > ring test, the target offset goes beyond supported offfset of +/- 1MB
> > from PC. This is an obvious bug in the GCC as RISC-V has a
> > two-instruction construct to jump to any absolute address (AUIPC+JALR).
> >
> > However there is no reason to force inlining as the test code works
> > perfectly fine without it.
> >
> > GCC has a bug report for a similar case (with conditionals):
> > https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062
> >
> > Fixes: a9fe152363 test/ring: add custom element size functional tests

Fixes: a9fe152363e2 ("test/ring: add custom element size functional tests")

> >
> > Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>

Applied, thanks.