diff mbox series

[v8,05/13] vdpa/ifc: add vDPA interrupt relay for blk device

Message ID 1652876035-70513-6-git-send-email-andy.pei@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Maxime Coquelin
Headers
Series add virtio_blk device support to vdpa/ifc |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Pei, Andy May 18, 2022, 12:13 p.m. UTC 
  For the net device type, only interrupt of rxq needed to be relayed.
But for block, since all the queues are used for both read and write
requests. Interrupt of all queues needed to be relayed.

Signed-off-by: Andy Pei <andy.pei@intel.com>
---
 drivers/vdpa/ifc/ifcvf_vdpa.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

Comments

Chenbo Xia May 23, 2022, 4:10 a.m. UTC | #1 
> -----Original Message-----
> From: Pei, Andy <andy.pei@intel.com>
> Sent: Wednesday, May 18, 2022 8:14 PM
> To: dev@dpdk.org
> Cc: Xia, Chenbo <chenbo.xia@intel.com>; maxime.coquelin@redhat.com; Cao,
> Gang <gang.cao@intel.com>; Liu, Changpeng <changpeng.liu@intel.com>; Xu,
> Rosen <rosen.xu@intel.com>; Xiao, QimaiX <qimaix.xiao@intel.com>
> Subject: [PATCH v8 05/13] vdpa/ifc: add vDPA interrupt relay for blk
> device
> 
> For the net device type, only interrupt of rxq needed to be relayed.
> But for block, since all the queues are used for both read and write
> requests. Interrupt of all queues needed to be relayed.
> 
> Signed-off-by: Andy Pei <andy.pei@intel.com>
> ---
>  drivers/vdpa/ifc/ifcvf_vdpa.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/vdpa/ifc/ifcvf_vdpa.c b/drivers/vdpa/ifc/ifcvf_vdpa.c
> index 350214a..509a1ed 100644
> --- a/drivers/vdpa/ifc/ifcvf_vdpa.c
> +++ b/drivers/vdpa/ifc/ifcvf_vdpa.c
> @@ -369,6 +369,7 @@ struct rte_vdpa_dev_info {
>  	irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
>  	irq_set->start = 0;
>  	fd_ptr = (int *)&irq_set->data;
> +	/* The first interrupt is for the configure space change
> notification */
>  	fd_ptr[RTE_INTR_VEC_ZERO_OFFSET] =
>  		rte_intr_fd_get(internal->pdev->intr_handle);
> 
> @@ -378,7 +379,13 @@ struct rte_vdpa_dev_info {
>  	for (i = 0; i < nr_vring; i++) {
>  		rte_vhost_get_vhost_vring(internal->vid, i, &vring);
>  		fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = vring.callfd;
> -		if ((i & 1) == 0 && m_rx == true) {
> +		if (m_rx == true &&
> +			((i & 1) == 0 || internal->hw.device_type == IFCVF_BLK))
> {
> +			/* For the net we only need to relay rx queue,
> +			 * which will change the mem of VM.
> +			 * For the blk we need to relay all the read cmd
> +			 * of each queue
> +			 */
>  			fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
>  			if (fd < 0) {
>  				DRV_LOG(ERR, "can't setup eventfd: %s",
> --
> 1.8.3.1

Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
diff mbox series

Patch

diff --git a/drivers/vdpa/ifc/ifcvf_vdpa.c b/drivers/vdpa/ifc/ifcvf_vdpa.c
index 350214a..509a1ed 100644
--- a/drivers/vdpa/ifc/ifcvf_vdpa.c
+++ b/drivers/vdpa/ifc/ifcvf_vdpa.c
@@ -369,6 +369,7 @@  struct rte_vdpa_dev_info {
 	irq_set->index = VFIO_PCI_MSIX_IRQ_INDEX;
 	irq_set->start = 0;
 	fd_ptr = (int *)&irq_set->data;
+	/* The first interrupt is for the configure space change notification */
 	fd_ptr[RTE_INTR_VEC_ZERO_OFFSET] =
 		rte_intr_fd_get(internal->pdev->intr_handle);
 
@@ -378,7 +379,13 @@  struct rte_vdpa_dev_info {
 	for (i = 0; i < nr_vring; i++) {
 		rte_vhost_get_vhost_vring(internal->vid, i, &vring);
 		fd_ptr[RTE_INTR_VEC_RXTX_OFFSET + i] = vring.callfd;
-		if ((i & 1) == 0 && m_rx == true) {
+		if (m_rx == true &&
+			((i & 1) == 0 || internal->hw.device_type == IFCVF_BLK)) {
+			/* For the net we only need to relay rx queue,
+			 * which will change the mem of VM.
+			 * For the blk we need to relay all the read cmd
+			 * of each queue
+			 */
 			fd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
 			if (fd < 0) {
 				DRV_LOG(ERR, "can't setup eventfd: %s",