[v2,1/3] rte_ethdev: Add API function to read dev clock

  Add rte_eth_read_clock to read the raw clock of a devide.

The main use is to get the device clock conversion co-efficients to be
able to translate the raw clock of the timestamp field of the pkt mbuf
to a local synced time value.

This function was missing to allow users to convert the RX timestamp field
to real time without the complexity of the rte_timesync* facility. One can
derivate the clock frequency by calling twice read_clock and then keep a
common time base.

Signed-off-by: Tom Barbette <barbette@kth.se>
---
 doc/guides/nics/features.rst             |  1 +
 lib/librte_ethdev/rte_ethdev.c           | 13 +++++++
 lib/librte_ethdev/rte_ethdev.h           | 44 ++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_core.h      |  6 ++++
 lib/librte_ethdev/rte_ethdev_version.map |  1 +
 lib/librte_mbuf/rte_mbuf.h               |  2 ++
 6 files changed, 67 insertions(+)
  

On 3/27/2019 6:19 AM, Tom Barbette wrote:
> Add rte_eth_read_clock to read the raw clock of a devide.
> 
> The main use is to get the device clock conversion co-efficients to be
> able to translate the raw clock of the timestamp field of the pkt mbuf
> to a local synced time value.
> 
> This function was missing to allow users to convert the RX timestamp field
> to real time without the complexity of the rte_timesync* facility. One can
> derivate the clock frequency by calling twice read_clock and then keep a
> common time base.
> 
> Signed-off-by: Tom Barbette <barbette@kth.se>
> ---
>  doc/guides/nics/features.rst             |  1 +
>  lib/librte_ethdev/rte_ethdev.c           | 13 +++++++
>  lib/librte_ethdev/rte_ethdev.h           | 44 ++++++++++++++++++++++++
>  lib/librte_ethdev/rte_ethdev_core.h      |  6 ++++
>  lib/librte_ethdev/rte_ethdev_version.map |  1 +
>  lib/librte_mbuf/rte_mbuf.h               |  2 ++
>  6 files changed, 67 insertions(+)
> 
> diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
> index c5bf32222..1e6adfb0b 100644
> --- a/doc/guides/nics/features.rst
> +++ b/doc/guides/nics/features.rst
> @@ -602,6 +602,7 @@ Supports Timestamp.
>  * **[provides] mbuf**: ``mbuf.ol_flags:PKT_RX_TIMESTAMP``.
>  * **[provides] mbuf**: ``mbuf.timestamp``.
>  * **[provides] rte_eth_dev_info**: ``rx_offload_capa,rx_queue_offload_capa: DEV_RX_OFFLOAD_TIMESTAMP``.
> +* **[implements] eth_dev_ops**: ``read_clock``.

This means for a PMD to claim 'timestamp' support, it should implement the
'read_clock' dev_ops, is it really the case?
Should we say 'related' instead of 'implements' ?

>  
>  .. _nic_features_macsec_offload:
>  
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 85c179496..7de0f35b5 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -4127,6 +4127,19 @@ rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *timestamp)
>  								timestamp));
>  }
>  
> +int
> +rte_eth_read_clock(uint16_t port_id, uint64_t *timestamp)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	dev = &rte_eth_devices[port_id];
> +
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->read_clock, -ENOTSUP);
> +	return eth_err(port_id, (*dev->dev_ops->read_clock)(dev,
> +								timestamp));

Please fix the syntax.

> +}
> +
>  int
>  rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info)
>  {
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index a3c864a13..e254da8b1 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -3642,6 +3642,50 @@ int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time);
>   */
>  int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time);
>  
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Read the current clock counter of an Ethernet device
> + *
> + * This returns the current raw clock value of an Ethernet device.
> + * The value returned here is from the same clock than the one
> + * filling timestamp field of RX packets. Therefore it can be used
> + * to compute a precise conversion of the device clock to the real time.
> + *
> + * E.g, a simple heuristic to derivate the frequency would be:
> + * uint64_t start, end;
> + * rte_eth_read_clock(port, start);
> + * rte_delay_ms(100);
> + * rte_eth_read_clock(port, end);
> + * double freq = (end - start) * 10;
> + *
> + * Compute a common reference with:
> + * uint64_t base_time_sec = current_time();
> + * uint64_t base_clock;
> + * rte_eth_read_clock(port, base_clock);
> + *
> + * Then, convert the raw mbuf timestamp with:
> + * base_time_sec + (double)(mbuf->timestamp - base_clock) / freq;
> + *
> + * This simple example will not provide a very good accuracy. One must
> + * at least measure multiple times the frequency and do a regression.
> + * To avoid deviation from the system time, the common reference can
> + * be repeated from time to time. The integer division can also be
> + * converted by a multiplication and a shift for better performance.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param time
> + *   Pointer to the uint64_t that holds the raw clock value.
> + *
> + * @return
> + *   - 0: Success.
> + *   - -ENODEV: The port ID is invalid.
> + *   - -ENOTSUP: The function is not supported by the Ethernet driver.

Can PMD return a fail?

> + */
> +int __rte_experimental rte_eth_read_clock(uint16_t port_id, uint64_t *time);

s/time/timestamp to match implementation param name, (reminder of updating
doxygen when this updated)

And I can see both syntax in use currently, but I think specially with
__rte_experimental tag, it looks cleaner to me as following:

int __rte_experimental
rte_eth_read_clock(uint16_t port_id, uint64_t *timestamp);

> +
>  /**
>   * Config l2 tunnel ether type of an Ethernet device for filtering specific
>   * tunnel packets by ether type.
> diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
> index 8f03f83f6..86806b3eb 100644
> --- a/lib/librte_ethdev/rte_ethdev_core.h
> +++ b/lib/librte_ethdev/rte_ethdev_core.h
> @@ -322,6 +322,10 @@ typedef int (*eth_timesync_write_time)(struct rte_eth_dev *dev,
>  				       const struct timespec *timestamp);
>  /**< @internal Function used to get time from the device clock */
>  
> +typedef int (*eth_read_clock)(struct rte_eth_dev *dev,
> +				      uint64_t *timestamp);
> +/**< @internal Function used to get the current value of the device clock. */
> +
>  typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
>  				struct rte_dev_reg_info *info);
>  /**< @internal Retrieve registers  */
> @@ -496,6 +500,8 @@ struct eth_dev_ops {
>  	eth_timesync_read_time     timesync_read_time; /** Get the device clock time. */
>  	eth_timesync_write_time    timesync_write_time; /** Set the device clock time. */
>  
> +	eth_read_clock             read_clock;
> +

Isn't this ABI breakage?

I guess it can be OK since we already increasing the ethdev ABIVER this version,
any comments?

>  	eth_xstats_get_by_id_t     xstats_get_by_id;
>  	/**< Get extended device statistic values by ID. */
>  	eth_xstats_get_names_by_id_t xstats_get_names_by_id;
> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
> index 92ac3de25..12d6c3c1d 100644
> --- a/lib/librte_ethdev/rte_ethdev_version.map
> +++ b/lib/librte_ethdev/rte_ethdev_version.map
> @@ -249,6 +249,7 @@ EXPERIMENTAL {
>  	rte_eth_switch_domain_free;
>  	rte_flow_conv;
>  	rte_flow_expand_rss;
> +	rte_eth_read_clock;

Can you please put this alphabetically sorted?

>  	rte_mtr_capabilities_get;
>  	rte_mtr_create;
>  	rte_mtr_destroy;
> diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
> index d961ccaf6..dd55b942c 100644
> --- a/lib/librte_mbuf/rte_mbuf.h
> +++ b/lib/librte_mbuf/rte_mbuf.h
> @@ -619,6 +619,8 @@ struct rte_mbuf {
>  
>  	/** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
>  	 * are not normalized but are always the same for a given port.
> +	 * Some devices allow to query rte_eth_read_clock that will return the
> +	 * current device timestamp.

cc'ed Olivier.

>  	 */
>  	uint64_t timestamp;
>  
>
  

Le 02/04/2019 à 19:46, Ferruh Yigit a écrit :

>> +* **[implements] eth_dev_ops**: ``read_clock``.
> 
> This means for a PMD to claim 'timestamp' support, it should implement the
> 'read_clock' dev_ops, is it really the case?
> Should we say 'related' instead of 'implements' ?

Ok for me. I guess this will depend on how another device vendor would 
implement the feature.

>> +	return eth_err(port_id, (*dev->dev_ops->read_clock)(dev,
>> +								timestamp)); > Please fix the syntax.

Just one more tab for the second line, right? Multiple functions just 
before have the same spacing. When in Rome...

> Can PMD return a fail?

MLX5's implementation may return any errno value, which are not defined 
in the ibv API it is using. Not sure how I should address that in the 
comment?

Thanks for the review! I directly addressed other comments in v3.

Tom