[v2,1/3] net/ice: enable switch filter
Checks
Commit Message
From: wei zhao <wei.zhao1@intel.com>
The patch enables the backend of rte_flow. It transfers
rte_flow_xxx to device specific data structure and
configures packet process engine's binary classifier
(switch) properly.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
---
drivers/net/ice/Makefile | 1 +
drivers/net/ice/ice_ethdev.h | 6 +
drivers/net/ice/ice_switch_filter.c | 502 ++++++++++++++++++++++++++++++++++++
drivers/net/ice/ice_switch_filter.h | 28 ++
drivers/net/ice/meson.build | 3 +-
5 files changed, 539 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ice/ice_switch_filter.c
create mode 100644 drivers/net/ice/ice_switch_filter.h
Comments
Hi,
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Qiming Yang
> Sent: Wednesday, June 12, 2019 3:50 PM
> To: dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>
> Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> From: wei zhao <wei.zhao1@intel.com>
>
> The patch enables the backend of rte_flow. It transfers
> rte_flow_xxx to device specific data structure and
> configures packet process engine's binary classifier
> (switch) properly.
>
> Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> ---
> drivers/net/ice/Makefile | 1 +
> drivers/net/ice/ice_ethdev.h | 6 +
> drivers/net/ice/ice_switch_filter.c | 502
> ++++++++++++++++++++++++++++++++++++
> drivers/net/ice/ice_switch_filter.h | 28 ++
> drivers/net/ice/meson.build | 3 +-
> 5 files changed, 539 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/ice/ice_switch_filter.c
> create mode 100644 drivers/net/ice/ice_switch_filter.h
>
> diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile
> index 0e5c55e..b10d826 100644
> --- a/drivers/net/ice/Makefile
> +++ b/drivers/net/ice/Makefile
> @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c
> endif
>
> +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> ifeq ($(findstring
> RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> CC_AVX2_SUPPORT=1
> else
> diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
> index 1385afa..67a358a 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -234,6 +234,12 @@ struct ice_vsi {
> bool offset_loaded;
> };
>
> +/* Struct to store flow created. */
> +struct rte_flow {
> + TAILQ_ENTRY(rte_flow) node;
> +void *rule;
> +};
> +
> struct ice_pf {
> struct ice_adapter *adapter; /* The adapter this PF associate to */
> struct ice_vsi *main_vsi; /* pointer to main VSI structure */
> diff --git a/drivers/net/ice/ice_switch_filter.c
> b/drivers/net/ice/ice_switch_filter.c
> new file mode 100644
> index 0000000..e679675
> --- /dev/null
> +++ b/drivers/net/ice/ice_switch_filter.c
> @@ -0,0 +1,502 @@
SPDX-License-Identifier missing.
> +#include <sys/queue.h>
> +#include <stdio.h>
> +#include <errno.h>
> +#include <stdint.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <stdarg.h>
> +
> +#include <rte_debug.h>
> +#include <rte_ether.h>
> +#include <rte_ethdev_driver.h>
> +#include <rte_log.h>
> +#include <rte_malloc.h>
> +#include <rte_eth_ctrl.h>
> +#include <rte_tailq.h>
> +#include <rte_flow_driver.h>
> +
> +#include "ice_logs.h"
> +#include "base/ice_type.h"
> +#include "ice_switch_filter.h"
> +
> +static int
> +ice_parse_switch_filter(
> + const struct rte_flow_item pattern[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error,
> + struct ice_adv_rule_info *rule_info,
> + struct ice_adv_lkup_elem **lkup_list,
> + uint16_t *lkups_num)
> +{
> + const struct rte_flow_item *item = pattern;
> + enum rte_flow_item_type item_type;
> + const struct rte_flow_item_eth *eth_spec, *eth_mask;
> + const struct rte_flow_item_ipv4 *ipv4_spec, *ipv4_mask;
> + const struct rte_flow_item_ipv6 *ipv6_spec, *ipv6_mask;
> + const struct rte_flow_item_tcp *tcp_spec, *tcp_mask;
> + const struct rte_flow_item_udp *udp_spec, *udp_mask;
> + const struct rte_flow_item_sctp *sctp_spec, *sctp_mask;
> + const struct rte_flow_item_nvgre *nvgre_spec, *nvgre_mask;
> + const struct rte_flow_item_vxlan *vxlan_spec, *vxlan_mask;
> + struct ice_adv_lkup_elem *list;
> + uint16_t i, j, t = 0;
> + uint16_t item_num = 0;
> + enum ice_sw_tunnel_type tun_type = ICE_NON_TUN;
> +
> + for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> + if (item->type == RTE_FLOW_ITEM_TYPE_ETH ||
> + item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
> + item->type == RTE_FLOW_ITEM_TYPE_IPV6 ||
> + item->type == RTE_FLOW_ITEM_TYPE_UDP ||
> + item->type == RTE_FLOW_ITEM_TYPE_TCP ||
> + item->type == RTE_FLOW_ITEM_TYPE_SCTP ||
> + item->type == RTE_FLOW_ITEM_TYPE_VXLAN ||
> + item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> + item_num++;
> + }
> +
> + list = rte_zmalloc(NULL, item_num * sizeof(*list), 0);
> + if (!list) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ITEM, actions,
> + "no memory malloc");
{RTE_FLOW_ERROR_TYPE_ITEM_NUM, item, "No memory for PMD internal items"} is more appropriate.
Refer to i40e implementation.
> + goto out;
> + }
> + *lkup_list = list;
> +
> + for (item = pattern, i = 0; item->type !=
> + RTE_FLOW_ITEM_TYPE_END; item++, i++) {
It seems we don't need the "i" variable.
> + item_type = item->type;
> +
> + switch (item_type) {
> + case RTE_FLOW_ITEM_TYPE_ETH:
> + eth_spec = item->spec;
> + eth_mask = item->mask;
> + if (eth_spec && eth_mask) {
> + list[t].type = (tun_type == ICE_NON_TUN) ?
> + ICE_MAC_OFOS : ICE_MAC_IL;
> + for (j = 0; j < RTE_ETHER_ADDR_LEN; j++) {
> + if (eth_mask->src.addr_bytes[j] ==
> + UINT8_MAX) {
> + list[t].h_u.eth_hdr.
> + src_addr[j] =
> + eth_spec->src.addr_bytes[j];
> + list[t].m_u.eth_hdr.
> + src_addr[j] =
> + eth_mask->src.addr_bytes[j];
> + }
> + if (eth_mask->dst.addr_bytes[j] ==
> + UINT8_MAX) {
> + list[t].h_u.eth_hdr.
> + dst_addr[j] =
> + eth_spec->dst.addr_bytes[j];
> + list[t].m_u.eth_hdr.
> + dst_addr[j] =
> + eth_mask->dst.addr_bytes[j];
> + }
> + }
> + if (eth_mask->type == UINT16_MAX) {
> + list[t].h_u.eth_hdr.ethtype_id =
> + rte_be_to_cpu_16(eth_spec->type);
> + list[t].m_u.eth_hdr.ethtype_id =
> + UINT16_MAX;
> + }
> + t++;
A lot of "t++" below, can we move it outside the switch{ } to have only one "t++"?
> + } else if (!eth_spec && !eth_mask) {
> + list[t].type = (tun_type == ICE_NON_TUN) ?
> + ICE_MAC_OFOS : ICE_MAC_IL;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_IPV4:
> + ipv4_spec = item->spec;
> + ipv4_mask = item->mask;
> + if (ipv4_spec && ipv4_mask) {
> + list[t].type = (tun_type == ICE_NON_TUN) ?
> + ICE_IPV4_OFOS : ICE_IPV4_IL;
> + if (ipv4_mask->hdr.src_addr == UINT32_MAX)
> {
> + list[t].h_u.ipv4_hdr.src_addr =
> + ipv4_spec->hdr.src_addr;
> + list[t].m_u.ipv4_hdr.src_addr =
> + UINT32_MAX;
> + }
> + if (ipv4_mask->hdr.dst_addr == UINT32_MAX)
> {
> + list[t].h_u.ipv4_hdr.dst_addr =
> + ipv4_spec->hdr.dst_addr;
> + list[t].m_u.ipv4_hdr.dst_addr =
> + UINT32_MAX;
> + }
> + if (ipv4_mask->hdr.time_to_live ==
> UINT8_MAX) {
> + list[t].h_u.ipv4_hdr.time_to_live =
> + ipv4_spec->hdr.time_to_live;
> + list[t].m_u.ipv4_hdr.time_to_live =
> + UINT8_MAX;
> + }
> + if (ipv4_mask->hdr.next_proto_id ==
> UINT8_MAX) {
> + list[t].h_u.ipv4_hdr.protocol =
> + ipv4_spec-
> >hdr.next_proto_id;
> + list[t].m_u.ipv4_hdr.protocol =
> + UINT8_MAX;
> + }
> + if (ipv4_mask->hdr.type_of_service ==
> + UINT8_MAX) {
> + list[t].h_u.ipv4_hdr.tos =
> + ipv4_spec-
> >hdr.type_of_service;
> + list[t].m_u.ipv4_hdr.tos = UINT8_MAX;
> + }
> + t++;
> + } else if (!ipv4_spec && !ipv4_mask) {
> + list[t].type = (tun_type == ICE_NON_TUN) ?
> + ICE_IPV4_OFOS : ICE_IPV4_IL;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_IPV6:
> + ipv6_spec = item->spec;
> + ipv6_mask = item->mask;
> + if (ipv6_spec && ipv6_mask) {
> + list[t].type = (tun_type == ICE_NON_TUN) ?
> + ICE_IPV6_OFOS : ICE_IPV6_IL;
> + for (j = 0; j < ICE_IPV6_ADDR_LENGTH; j++) {
> + if (ipv6_mask->hdr.src_addr[j] ==
> + UINT8_MAX) {
> + list[t].h_u.ice_ipv6_ofos_hdr.
> + src_addr[j] =
> + ipv6_spec->hdr.src_addr[j];
> + list[t].m_u.ice_ipv6_ofos_hdr.
> + src_addr[j] =
> + ipv6_mask->hdr.src_addr[j];
> + }
> + if (ipv6_mask->hdr.dst_addr[j] ==
> + UINT8_MAX) {
> + list[t].h_u.ice_ipv6_ofos_hdr.
> + dst_addr[j] =
> + ipv6_spec->hdr.dst_addr[j];
> + list[t].m_u.ice_ipv6_ofos_hdr.
> + dst_addr[j] =
> + ipv6_mask->hdr.dst_addr[j];
> + }
> + }
> + if (ipv6_mask->hdr.proto == UINT8_MAX) {
> +
> list[t].h_u.ice_ipv6_ofos_hdr.next_hdr =
> + ipv6_spec->hdr.proto;
> +
> list[t].m_u.ice_ipv6_ofos_hdr.next_hdr =
> + UINT8_MAX;
> + }
> + if (ipv6_mask->hdr.hop_limits == UINT8_MAX)
> {
> + list[t].h_u.ice_ipv6_ofos_hdr.
> + hop_limit = ipv6_spec-
> >hdr.hop_limits;
> + list[t].m_u.ice_ipv6_ofos_hdr.
> + hop_limit = UINT8_MAX;
> + }
> + t++;
> + } else if (!ipv6_spec && !ipv6_mask) {
> + list[t].type = (tun_type == ICE_NON_TUN) ?
> + ICE_IPV4_OFOS : ICE_IPV4_IL;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_UDP:
> + udp_spec = item->spec;
> + udp_mask = item->mask;
> + if (udp_spec && udp_mask) {
> + list[t].type = ICE_UDP_ILOS;
> + if (udp_mask->hdr.src_port == UINT16_MAX)
> {
> + list[t].h_u.l4_hdr.src_port =
> + udp_spec->hdr.src_port;
> + list[t].m_u.l4_hdr.src_port =
> + udp_mask->hdr.src_port;
> + }
> + if (udp_mask->hdr.dst_port == UINT16_MAX)
> {
> + list[t].h_u.l4_hdr.dst_port =
> + udp_spec->hdr.dst_port;
> + list[t].m_u.l4_hdr.dst_port =
> + udp_mask->hdr.dst_port;
> + }
> + t++;
> + } else if (!udp_spec && !udp_mask) {
> + list[t].type = ICE_UDP_ILOS;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_TCP:
> + tcp_spec = item->spec;
> + tcp_mask = item->mask;
> + if (tcp_spec && tcp_mask) {
> + list[t].type = ICE_TCP_IL;
> + if (tcp_mask->hdr.src_port == UINT16_MAX) {
> + list[t].h_u.l4_hdr.src_port =
> + tcp_spec->hdr.src_port;
> + list[t].m_u.l4_hdr.src_port =
> + tcp_mask->hdr.src_port;
> + }
> + if (tcp_mask->hdr.dst_port == UINT16_MAX) {
> + list[t].h_u.l4_hdr.dst_port =
> + tcp_spec->hdr.dst_port;
> + list[t].m_u.l4_hdr.dst_port =
> + tcp_mask->hdr.dst_port;
> + }
> + t++;
> + } else if (!tcp_spec && !tcp_mask) {
> + list[t].type = ICE_TCP_IL;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_SCTP:
> + sctp_spec = item->spec;
> + sctp_mask = item->mask;
> + if (sctp_spec && sctp_mask) {
> + list[t].type = ICE_SCTP_IL;
> + if (sctp_mask->hdr.src_port == UINT16_MAX)
> {
> + list[t].h_u.sctp_hdr.src_port =
> + sctp_spec->hdr.src_port;
> + list[t].m_u.sctp_hdr.src_port =
> + sctp_mask->hdr.src_port;
> + }
> + if (sctp_mask->hdr.dst_port == UINT16_MAX)
> {
> + list[t].h_u.sctp_hdr.dst_port =
> + sctp_spec->hdr.dst_port;
> + list[t].m_u.sctp_hdr.dst_port =
> + sctp_mask->hdr.dst_port;
> + }
> + t++;
> + } else if (!sctp_spec && !sctp_mask) {
> + list[t].type = ICE_SCTP_IL;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_VXLAN:
> + vxlan_spec = item->spec;
> + vxlan_mask = item->mask;
> + tun_type = ICE_SW_TUN_VXLAN;
> + if (vxlan_spec && vxlan_mask) {
> + list[t].type = ICE_VXLAN;
> + if (vxlan_mask->vni[0] == UINT8_MAX &&
> + vxlan_mask->vni[1] == UINT8_MAX
> &&
> + vxlan_mask->vni[2] == UINT8_MAX) {
> + list[t].h_u.tnl_hdr.vni =
> + (vxlan_spec->vni[1] << 8) |
> + vxlan_spec->vni[0];
> + list[t].m_u.tnl_hdr.vni =
> + UINT16_MAX;
vxlan_spec->vni[2] does not need to be put into the list?
> + }
> + t++;
> + } else if (!vxlan_spec && !vxlan_mask) {
> + list[t].type = ICE_VXLAN;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_NVGRE:
> + nvgre_spec = item->spec;
> + nvgre_mask = item->mask;
> + tun_type = ICE_SW_TUN_NVGRE;
> + if (nvgre_spec && nvgre_mask) {
> + list[t].type = ICE_NVGRE;
> + if (nvgre_mask->tni[0] == UINT8_MAX &&
> + nvgre_mask->tni[1] == UINT8_MAX
> &&
> + nvgre_mask->tni[2] == UINT8_MAX) {
> + list[t].h_u.nvgre_hdr.tni =
> + (nvgre_spec->tni[1] << 8) |
> + nvgre_spec->tni[0];
> + list[t].m_u.nvgre_hdr.tni =
> + UINT16_MAX;
> + }
> + t++;
> + } else if (!nvgre_spec && !nvgre_mask) {
> + list[t].type = ICE_NVGRE;
> + }
> + break;
> +
> + case RTE_FLOW_ITEM_TYPE_VOID:
> + case RTE_FLOW_ITEM_TYPE_END:
> + break;
> +
> + default:
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ITEM, actions,
> + "Invalid pattern item.");
> + goto out;
> + }
> + }
> +
> + rule_info->tun_type = tun_type;
> + *lkups_num = t;
> +
> + return 0;
> +out:
We may need to free the allocated list before return.
> + return -rte_errno;
> +}
> +
> +/* By now ice switch filter action code implement only
> +* supports QUEUE or DROP.
> +*/
> +static int
> +ice_parse_switch_action(struct ice_pf *pf,
> + const struct rte_flow_action *actions,
> + struct rte_flow_error *error,
> + struct ice_adv_rule_info *rule_info)
> +{
> + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> + struct ice_vsi *vsi = pf->main_vsi;
> + const struct rte_flow_action *act;
> + const struct rte_flow_action_queue *act_q;
> + uint16_t base_queue, index = 0;
> + uint32_t reg;
> +
> + /* Check if the first non-void action is QUEUE or DROP. */
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> + act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Not supported action.");
> + return -rte_errno;
> + }
> + reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> + if (reg & PFLAN_RX_QALLOC_VALID_M) {
> + base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
Can we get this register info earlier in dev_start() or somewhere else? Then we can use the base_queue directly.
> + } else {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Invalid queue register");
> + return -rte_errno;
> + }
> + if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> + act_q = act->conf;
> + rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> + rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> + if (act_q->index >= pf->dev_data->nb_rx_queues) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Invalid queue ID for"
> + " switch filter.");
> + return -rte_errno;
> + }
> + } else {
> + rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> + }
> +
> + rule_info->sw_act.vsi_handle = vsi->idx;
> + rule_info->rx = 1;
> + rule_info->sw_act.src = vsi->idx;
> +
> + /* Check if the next non-void item is END */
> + index++;
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Not supported action.");
> + return -rte_errno;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +ice_switch_rule_set(struct ice_pf *pf,
> + struct ice_adv_lkup_elem *list,
> + uint16_t lkups_cnt,
> + struct ice_adv_rule_info *rule_info,
> + struct rte_flow *flow)
> +{
> + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> + int ret;
> + struct ice_rule_query_data rule_added = {0};
> + struct ice_rule_query_data *filter_ptr;
> +
> + if (lkups_cnt > ICE_MAX_CHAIN_WORDS) {
> + PMD_DRV_LOG(ERR, "item number too large for rule");
Why not rte_flow_error_set() to report error?
> + return -ENOTSUP;
> + }
> + if (!list) {
> + PMD_DRV_LOG(ERR, "lookup list should not be NULL");
Ditto.
> + return -ENOTSUP;
> + }
> +
> + ret = ice_add_adv_rule(hw, list, lkups_cnt, rule_info, &rule_added);
> +
> + if (!ret) {
> + filter_ptr = rte_zmalloc("ice_switch_filter",
> + sizeof(struct ice_rule_query_data), 0);
> + if (!filter_ptr) {
> + PMD_DRV_LOG(ERR, "failed to allocate memory");
> + return -EINVAL;
> + }
> + flow->rule = filter_ptr;
> + rte_memcpy(filter_ptr,
> + &rule_added,
> + sizeof(struct ice_rule_query_data));
> + }
> +
> + return ret;
> +}
> +
> +int
> +ice_create_switch_filter(struct ice_pf *pf,
> + const struct rte_flow_item pattern[],
> + const struct rte_flow_action actions[],
> + struct rte_flow *flow,
> + struct rte_flow_error *error)
> +{
> + int ret = 0;
> + struct ice_adv_rule_info rule_info = {0};
> + struct ice_adv_lkup_elem *list = NULL;
> + uint16_t lkups_num = 0;
> +
> + ret = ice_parse_switch_filter(pattern, actions, error,
> + &rule_info, &list, &lkups_num);
> + if (ret)
> + goto out;
> +
> + ret = ice_parse_switch_action(pf, actions, error, &rule_info);
> + if (ret)
> + goto out;
> +
> + ret = ice_switch_rule_set(pf, list, lkups_num, &rule_info, flow);
> + if (ret)
> + goto out;
> +
> + rte_free(list);
> + return 0;
> +
> +out:
> + rte_free(list);
> +
> + return -rte_errno;
> +}
> +
> +int
> +ice_destroy_switch_filter(struct ice_pf *pf,
> + struct rte_flow *flow)
> +{
> + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> + int ret;
> + struct ice_rule_query_data *filter_ptr;
> + struct ice_rule_query_data rule_added;
> +
> + filter_ptr = (struct ice_rule_query_data *)
> + flow->rule;
> + rte_memcpy(&rule_added, filter_ptr,
> + sizeof(struct ice_rule_query_data));
> +
> + if (!filter_ptr) {
> + PMD_DRV_LOG(ERR, "no such flow"
> + " create by switch filter");
> + return -EINVAL;
> + }
We should do this check at least before rte_memcpy.
> +
> + ret = ice_rem_adv_rule_by_id(hw, &rule_added);
We can use filter_ptr directly for the switch rule delete.
> +
> + rte_free(filter_ptr);
> +
> + return ret;
> +}
> +
> +void
> +ice_free_switch_filter_rule(void *rule)
> +{
> + struct ice_rule_query_data *filter_ptr;
> +
> + filter_ptr = (struct ice_rule_query_data *)rule;
> +
> + rte_free(filter_ptr);
> +}
> diff --git a/drivers/net/ice/ice_switch_filter.h
> b/drivers/net/ice/ice_switch_filter.h
> new file mode 100644
> index 0000000..957d0d1
> --- /dev/null
> +++ b/drivers/net/ice/ice_switch_filter.h
> @@ -0,0 +1,28 @@
Also a license is needed in new file.
BRs,
Xiao
> +#ifndef _ICE_SWITCH_FILTER_H_
> +#define _ICE_SWITCH_FILTER_H_
Hi， xiao
> -----Original Message-----
> From: Wang, Xiao W
> Sent: Thursday, June 13, 2019 4:24 PM
> To: Yang, Qiming <qiming.yang@intel.com>; dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> Hi,
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Qiming Yang
> > Sent: Wednesday, June 12, 2019 3:50 PM
> > To: dev@dpdk.org
> > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> >
> > From: wei zhao <wei.zhao1@intel.com>
> >
> > The patch enables the backend of rte_flow. It transfers rte_flow_xxx
> > to device specific data structure and configures packet process
> > engine's binary classifier
> > (switch) properly.
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
> > drivers/net/ice/Makefile | 1 +
> > drivers/net/ice/ice_ethdev.h | 6 +
> > drivers/net/ice/ice_switch_filter.c | 502
> > ++++++++++++++++++++++++++++++++++++
> > drivers/net/ice/ice_switch_filter.h | 28 ++
> > drivers/net/ice/meson.build | 3 +-
> > 5 files changed, 539 insertions(+), 1 deletion(-) create mode 100644
> > drivers/net/ice/ice_switch_filter.c
> > create mode 100644 drivers/net/ice/ice_switch_filter.h
> >
> > diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile index
> > 0e5c55e..b10d826 100644
> > --- a/drivers/net/ice/Makefile
> > +++ b/drivers/net/ice/Makefile
> > @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> > SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c endif
> >
> > +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> > ifeq ($(findstring
> > RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> > CC_AVX2_SUPPORT=1
> > else
> > diff --git a/drivers/net/ice/ice_ethdev.h
> > b/drivers/net/ice/ice_ethdev.h index 1385afa..67a358a 100644
> > --- a/drivers/net/ice/ice_ethdev.h
> > +++ b/drivers/net/ice/ice_ethdev.h
> > @@ -234,6 +234,12 @@ struct ice_vsi {
> > bool offset_loaded;
> > };
> >
> > +/* Struct to store flow created. */
> > +struct rte_flow {
> > + TAILQ_ENTRY(rte_flow) node;
> > +void *rule;
> > +};
> > +
> > struct ice_pf {
> > struct ice_adapter *adapter; /* The adapter this PF associate to */
> > struct ice_vsi *main_vsi; /* pointer to main VSI structure */ diff
> > --git a/drivers/net/ice/ice_switch_filter.c
> > b/drivers/net/ice/ice_switch_filter.c
> > new file mode 100644
> > index 0000000..e679675
> > --- /dev/null
> > +++ b/drivers/net/ice/ice_switch_filter.c
> > @@ -0,0 +1,502 @@
>
> SPDX-License-Identifier missing.
Ok, Updated in v3
>
> > +#include <sys/queue.h>
> > +#include <stdio.h>
> > +#include <errno.h>
> > +#include <stdint.h>
> > +#include <string.h>
> > +#include <unistd.h>
> > +#include <stdarg.h>
> > +
> > +#include <rte_debug.h>
> > +#include <rte_ether.h>
> > +#include <rte_ethdev_driver.h>
> > +#include <rte_log.h>
> > +#include <rte_malloc.h>
> > +#include <rte_eth_ctrl.h>
> > +#include <rte_tailq.h>
> > +#include <rte_flow_driver.h>
> > +
> > +#include "ice_logs.h"
> > +#include "base/ice_type.h"
> > +#include "ice_switch_filter.h"
> > +
> > +static int
> > +ice_parse_switch_filter(
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[],
> > + struct rte_flow_error *error,
> > + struct ice_adv_rule_info *rule_info,
> > + struct ice_adv_lkup_elem **lkup_list,
> > + uint16_t *lkups_num)
> > +{
> > + const struct rte_flow_item *item = pattern;
> > + enum rte_flow_item_type item_type;
> > + const struct rte_flow_item_eth *eth_spec, *eth_mask;
> > + const struct rte_flow_item_ipv4 *ipv4_spec, *ipv4_mask;
> > + const struct rte_flow_item_ipv6 *ipv6_spec, *ipv6_mask;
> > + const struct rte_flow_item_tcp *tcp_spec, *tcp_mask;
> > + const struct rte_flow_item_udp *udp_spec, *udp_mask;
> > + const struct rte_flow_item_sctp *sctp_spec, *sctp_mask;
> > + const struct rte_flow_item_nvgre *nvgre_spec, *nvgre_mask;
> > + const struct rte_flow_item_vxlan *vxlan_spec, *vxlan_mask;
> > + struct ice_adv_lkup_elem *list;
> > + uint16_t i, j, t = 0;
> > + uint16_t item_num = 0;
> > + enum ice_sw_tunnel_type tun_type = ICE_NON_TUN;
> > +
> > + for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> > + if (item->type == RTE_FLOW_ITEM_TYPE_ETH ||
> > + item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
> > + item->type == RTE_FLOW_ITEM_TYPE_IPV6 ||
> > + item->type == RTE_FLOW_ITEM_TYPE_UDP ||
> > + item->type == RTE_FLOW_ITEM_TYPE_TCP ||
> > + item->type == RTE_FLOW_ITEM_TYPE_SCTP ||
> > + item->type == RTE_FLOW_ITEM_TYPE_VXLAN ||
> > + item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> > + item_num++;
> > + }
> > +
> > + list = rte_zmalloc(NULL, item_num * sizeof(*list), 0);
> > + if (!list) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM, actions,
> > + "no memory malloc");
>
> {RTE_FLOW_ERROR_TYPE_ITEM_NUM, item, "No memory for PMD internal
> items"} is more appropriate.
> Refer to i40e implementation.
Ok, Updated in v3
>
> > + goto out;
> > + }
> > + *lkup_list = list;
> > +
> > + for (item = pattern, i = 0; item->type !=
> > + RTE_FLOW_ITEM_TYPE_END; item++, i++) {
>
> It seems we don't need the "i" variable.
Ok, Updated in v3
>
> > + item_type = item->type;
> > +
> > + switch (item_type) {
> > + case RTE_FLOW_ITEM_TYPE_ETH:
> > + eth_spec = item->spec;
> > + eth_mask = item->mask;
> > + if (eth_spec && eth_mask) {
> > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > + ICE_MAC_OFOS : ICE_MAC_IL;
> > + for (j = 0; j < RTE_ETHER_ADDR_LEN; j++) {
> > + if (eth_mask->src.addr_bytes[j] ==
> > + UINT8_MAX) {
> > + list[t].h_u.eth_hdr.
> > + src_addr[j] =
> > + eth_spec->src.addr_bytes[j];
> > + list[t].m_u.eth_hdr.
> > + src_addr[j] =
> > + eth_mask->src.addr_bytes[j];
> > + }
> > + if (eth_mask->dst.addr_bytes[j] ==
> > + UINT8_MAX) {
> > + list[t].h_u.eth_hdr.
> > + dst_addr[j] =
> > + eth_spec->dst.addr_bytes[j];
> > + list[t].m_u.eth_hdr.
> > + dst_addr[j] =
> > + eth_mask->dst.addr_bytes[j];
> > + }
> > + }
> > + if (eth_mask->type == UINT16_MAX) {
> > + list[t].h_u.eth_hdr.ethtype_id =
> > + rte_be_to_cpu_16(eth_spec->type);
> > + list[t].m_u.eth_hdr.ethtype_id =
> > + UINT16_MAX;
> > + }
> > + t++;
>
> A lot of "t++" below, can we move it outside the switch{ } to have only one "t++"?
By now, we can not, because share code can not handle if (!eth_spec && !eth_mask) case, if we t++
For that case, that item will put into list[t], and share code will report error.
>
> > + } else if (!eth_spec && !eth_mask) {
> > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > + ICE_MAC_OFOS : ICE_MAC_IL;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_IPV4:
> > + ipv4_spec = item->spec;
> > + ipv4_mask = item->mask;
> > + if (ipv4_spec && ipv4_mask) {
> > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > + ICE_IPV4_OFOS : ICE_IPV4_IL;
> > + if (ipv4_mask->hdr.src_addr == UINT32_MAX)
> > {
> > + list[t].h_u.ipv4_hdr.src_addr =
> > + ipv4_spec->hdr.src_addr;
> > + list[t].m_u.ipv4_hdr.src_addr =
> > + UINT32_MAX;
> > + }
> > + if (ipv4_mask->hdr.dst_addr == UINT32_MAX)
> > {
> > + list[t].h_u.ipv4_hdr.dst_addr =
> > + ipv4_spec->hdr.dst_addr;
> > + list[t].m_u.ipv4_hdr.dst_addr =
> > + UINT32_MAX;
> > + }
> > + if (ipv4_mask->hdr.time_to_live ==
> > UINT8_MAX) {
> > + list[t].h_u.ipv4_hdr.time_to_live =
> > + ipv4_spec->hdr.time_to_live;
> > + list[t].m_u.ipv4_hdr.time_to_live =
> > + UINT8_MAX;
> > + }
> > + if (ipv4_mask->hdr.next_proto_id ==
> > UINT8_MAX) {
> > + list[t].h_u.ipv4_hdr.protocol =
> > + ipv4_spec-
> > >hdr.next_proto_id;
> > + list[t].m_u.ipv4_hdr.protocol =
> > + UINT8_MAX;
> > + }
> > + if (ipv4_mask->hdr.type_of_service ==
> > + UINT8_MAX) {
> > + list[t].h_u.ipv4_hdr.tos =
> > + ipv4_spec-
> > >hdr.type_of_service;
> > + list[t].m_u.ipv4_hdr.tos = UINT8_MAX;
> > + }
> > + t++;
> > + } else if (!ipv4_spec && !ipv4_mask) {
> > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > + ICE_IPV4_OFOS : ICE_IPV4_IL;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_IPV6:
> > + ipv6_spec = item->spec;
> > + ipv6_mask = item->mask;
> > + if (ipv6_spec && ipv6_mask) {
> > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > + ICE_IPV6_OFOS : ICE_IPV6_IL;
> > + for (j = 0; j < ICE_IPV6_ADDR_LENGTH; j++) {
> > + if (ipv6_mask->hdr.src_addr[j] ==
> > + UINT8_MAX) {
> > + list[t].h_u.ice_ipv6_ofos_hdr.
> > + src_addr[j] =
> > + ipv6_spec->hdr.src_addr[j];
> > + list[t].m_u.ice_ipv6_ofos_hdr.
> > + src_addr[j] =
> > + ipv6_mask->hdr.src_addr[j];
> > + }
> > + if (ipv6_mask->hdr.dst_addr[j] ==
> > + UINT8_MAX) {
> > + list[t].h_u.ice_ipv6_ofos_hdr.
> > + dst_addr[j] =
> > + ipv6_spec->hdr.dst_addr[j];
> > + list[t].m_u.ice_ipv6_ofos_hdr.
> > + dst_addr[j] =
> > + ipv6_mask->hdr.dst_addr[j];
> > + }
> > + }
> > + if (ipv6_mask->hdr.proto == UINT8_MAX) {
> > +
> > list[t].h_u.ice_ipv6_ofos_hdr.next_hdr =
> > + ipv6_spec->hdr.proto;
> > +
> > list[t].m_u.ice_ipv6_ofos_hdr.next_hdr =
> > + UINT8_MAX;
> > + }
> > + if (ipv6_mask->hdr.hop_limits == UINT8_MAX)
> > {
> > + list[t].h_u.ice_ipv6_ofos_hdr.
> > + hop_limit = ipv6_spec-
> > >hdr.hop_limits;
> > + list[t].m_u.ice_ipv6_ofos_hdr.
> > + hop_limit = UINT8_MAX;
> > + }
> > + t++;
> > + } else if (!ipv6_spec && !ipv6_mask) {
> > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > + ICE_IPV4_OFOS : ICE_IPV4_IL;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_UDP:
> > + udp_spec = item->spec;
> > + udp_mask = item->mask;
> > + if (udp_spec && udp_mask) {
> > + list[t].type = ICE_UDP_ILOS;
> > + if (udp_mask->hdr.src_port == UINT16_MAX)
> > {
> > + list[t].h_u.l4_hdr.src_port =
> > + udp_spec->hdr.src_port;
> > + list[t].m_u.l4_hdr.src_port =
> > + udp_mask->hdr.src_port;
> > + }
> > + if (udp_mask->hdr.dst_port == UINT16_MAX)
> > {
> > + list[t].h_u.l4_hdr.dst_port =
> > + udp_spec->hdr.dst_port;
> > + list[t].m_u.l4_hdr.dst_port =
> > + udp_mask->hdr.dst_port;
> > + }
> > + t++;
> > + } else if (!udp_spec && !udp_mask) {
> > + list[t].type = ICE_UDP_ILOS;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_TCP:
> > + tcp_spec = item->spec;
> > + tcp_mask = item->mask;
> > + if (tcp_spec && tcp_mask) {
> > + list[t].type = ICE_TCP_IL;
> > + if (tcp_mask->hdr.src_port == UINT16_MAX) {
> > + list[t].h_u.l4_hdr.src_port =
> > + tcp_spec->hdr.src_port;
> > + list[t].m_u.l4_hdr.src_port =
> > + tcp_mask->hdr.src_port;
> > + }
> > + if (tcp_mask->hdr.dst_port == UINT16_MAX) {
> > + list[t].h_u.l4_hdr.dst_port =
> > + tcp_spec->hdr.dst_port;
> > + list[t].m_u.l4_hdr.dst_port =
> > + tcp_mask->hdr.dst_port;
> > + }
> > + t++;
> > + } else if (!tcp_spec && !tcp_mask) {
> > + list[t].type = ICE_TCP_IL;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_SCTP:
> > + sctp_spec = item->spec;
> > + sctp_mask = item->mask;
> > + if (sctp_spec && sctp_mask) {
> > + list[t].type = ICE_SCTP_IL;
> > + if (sctp_mask->hdr.src_port == UINT16_MAX)
> > {
> > + list[t].h_u.sctp_hdr.src_port =
> > + sctp_spec->hdr.src_port;
> > + list[t].m_u.sctp_hdr.src_port =
> > + sctp_mask->hdr.src_port;
> > + }
> > + if (sctp_mask->hdr.dst_port == UINT16_MAX)
> > {
> > + list[t].h_u.sctp_hdr.dst_port =
> > + sctp_spec->hdr.dst_port;
> > + list[t].m_u.sctp_hdr.dst_port =
> > + sctp_mask->hdr.dst_port;
> > + }
> > + t++;
> > + } else if (!sctp_spec && !sctp_mask) {
> > + list[t].type = ICE_SCTP_IL;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_VXLAN:
> > + vxlan_spec = item->spec;
> > + vxlan_mask = item->mask;
> > + tun_type = ICE_SW_TUN_VXLAN;
> > + if (vxlan_spec && vxlan_mask) {
> > + list[t].type = ICE_VXLAN;
> > + if (vxlan_mask->vni[0] == UINT8_MAX &&
> > + vxlan_mask->vni[1] == UINT8_MAX
> > &&
> > + vxlan_mask->vni[2] == UINT8_MAX) {
> > + list[t].h_u.tnl_hdr.vni =
> > + (vxlan_spec->vni[1] << 8) |
> > + vxlan_spec->vni[0];
> > + list[t].m_u.tnl_hdr.vni =
> > + UINT16_MAX;
>
> vxlan_spec->vni[2] does not need to be put into the list?
Old Share code only support 16bit vni, not 24bit ,share code bug.
But we will updated in v3 to 24bit.
>
> > + }
> > + t++;
> > + } else if (!vxlan_spec && !vxlan_mask) {
> > + list[t].type = ICE_VXLAN;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_NVGRE:
> > + nvgre_spec = item->spec;
> > + nvgre_mask = item->mask;
> > + tun_type = ICE_SW_TUN_NVGRE;
> > + if (nvgre_spec && nvgre_mask) {
> > + list[t].type = ICE_NVGRE;
> > + if (nvgre_mask->tni[0] == UINT8_MAX &&
> > + nvgre_mask->tni[1] == UINT8_MAX
> > &&
> > + nvgre_mask->tni[2] == UINT8_MAX) {
> > + list[t].h_u.nvgre_hdr.tni =
> > + (nvgre_spec->tni[1] << 8) |
> > + nvgre_spec->tni[0];
> > + list[t].m_u.nvgre_hdr.tni =
> > + UINT16_MAX;
> > + }
> > + t++;
> > + } else if (!nvgre_spec && !nvgre_mask) {
> > + list[t].type = ICE_NVGRE;
> > + }
> > + break;
> > +
> > + case RTE_FLOW_ITEM_TYPE_VOID:
> > + case RTE_FLOW_ITEM_TYPE_END:
> > + break;
> > +
> > + default:
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ITEM, actions,
> > + "Invalid pattern item.");
> > + goto out;
> > + }
> > + }
> > +
> > + rule_info->tun_type = tun_type;
> > + *lkups_num = t;
> > +
> > + return 0;
> > +out:
>
> We may need to free the allocated list before return.
No, list[] memory will be used in later function.
we can not free now.
>
> > + return -rte_errno;
> > +}
> > +
> > +/* By now ice switch filter action code implement only
> > +* supports QUEUE or DROP.
> > +*/
> > +static int
> > +ice_parse_switch_action(struct ice_pf *pf,
> > + const struct rte_flow_action *actions,
> > + struct rte_flow_error *error,
> > + struct ice_adv_rule_info *rule_info) {
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + struct ice_vsi *vsi = pf->main_vsi;
> > + const struct rte_flow_action *act;
> > + const struct rte_flow_action_queue *act_q;
> > + uint16_t base_queue, index = 0;
> > + uint32_t reg;
> > +
> > + /* Check if the first non-void action is QUEUE or DROP. */
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> > + act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > + reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> > + if (reg & PFLAN_RX_QALLOC_VALID_M) {
> > + base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
>
> Can we get this register info earlier in dev_start() or somewhere else? Then we
> can use the base_queue directly.
Maybe, it can be used for other case.
>
> > + } else {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Invalid queue register");
> > + return -rte_errno;
> > + }
> > + if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> > + act_q = act->conf;
> > + rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> > + rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> > + if (act_q->index >= pf->dev_data->nb_rx_queues) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Invalid queue ID for"
> > + " switch filter.");
> > + return -rte_errno;
> > + }
> > + } else {
> > + rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> > + }
> > +
> > + rule_info->sw_act.vsi_handle = vsi->idx;
> > + rule_info->rx = 1;
> > + rule_info->sw_act.src = vsi->idx;
> > +
> > + /* Check if the next non-void item is END */
> > + index++;
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +ice_switch_rule_set(struct ice_pf *pf,
> > + struct ice_adv_lkup_elem *list,
> > + uint16_t lkups_cnt,
> > + struct ice_adv_rule_info *rule_info,
> > + struct rte_flow *flow)
> > +{
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + int ret;
> > + struct ice_rule_query_data rule_added = {0};
> > + struct ice_rule_query_data *filter_ptr;
> > +
> > + if (lkups_cnt > ICE_MAX_CHAIN_WORDS) {
> > + PMD_DRV_LOG(ERR, "item number too large for rule");
>
> Why not rte_flow_error_set() to report error?
Ok, Update in v3
>
> > + return -ENOTSUP;
> > + }
> > + if (!list) {
> > + PMD_DRV_LOG(ERR, "lookup list should not be NULL");
>
> Ditto.
>
> > + return -ENOTSUP;
> > + }
> > +
> > + ret = ice_add_adv_rule(hw, list, lkups_cnt, rule_info, &rule_added);
> > +
> > + if (!ret) {
> > + filter_ptr = rte_zmalloc("ice_switch_filter",
> > + sizeof(struct ice_rule_query_data), 0);
> > + if (!filter_ptr) {
> > + PMD_DRV_LOG(ERR, "failed to allocate memory");
> > + return -EINVAL;
> > + }
> > + flow->rule = filter_ptr;
> > + rte_memcpy(filter_ptr,
> > + &rule_added,
> > + sizeof(struct ice_rule_query_data));
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +int
> > +ice_create_switch_filter(struct ice_pf *pf,
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[],
> > + struct rte_flow *flow,
> > + struct rte_flow_error *error)
> > +{
> > + int ret = 0;
> > + struct ice_adv_rule_info rule_info = {0};
> > + struct ice_adv_lkup_elem *list = NULL;
> > + uint16_t lkups_num = 0;
> > +
> > + ret = ice_parse_switch_filter(pattern, actions, error,
> > + &rule_info, &list, &lkups_num);
> > + if (ret)
> > + goto out;
> > +
> > + ret = ice_parse_switch_action(pf, actions, error, &rule_info);
> > + if (ret)
> > + goto out;
> > +
> > + ret = ice_switch_rule_set(pf, list, lkups_num, &rule_info, flow);
> > + if (ret)
> > + goto out;
> > +
> > + rte_free(list);
> > + return 0;
> > +
> > +out:
> > + rte_free(list);
> > +
> > + return -rte_errno;
> > +}
> > +
> > +int
> > +ice_destroy_switch_filter(struct ice_pf *pf,
> > + struct rte_flow *flow)
> > +{
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + int ret;
> > + struct ice_rule_query_data *filter_ptr;
> > + struct ice_rule_query_data rule_added;
> > +
> > + filter_ptr = (struct ice_rule_query_data *)
> > + flow->rule;
> > + rte_memcpy(&rule_added, filter_ptr,
> > + sizeof(struct ice_rule_query_data));
> > +
> > + if (!filter_ptr) {
> > + PMD_DRV_LOG(ERR, "no such flow"
> > + " create by switch filter");
> > + return -EINVAL;
> > + }
>
> We should do this check at least before rte_memcpy.
Ok, update in v3
>
> > +
> > + ret = ice_rem_adv_rule_by_id(hw, &rule_added);
>
> We can use filter_ptr directly for the switch rule delete.
Ok, update in v3
>
> > +
> > + rte_free(filter_ptr);
> > +
> > + return ret;
> > +}
> > +
> > +void
> > +ice_free_switch_filter_rule(void *rule) {
> > + struct ice_rule_query_data *filter_ptr;
> > +
> > + filter_ptr = (struct ice_rule_query_data *)rule;
> > +
> > + rte_free(filter_ptr);
> > +}
> > diff --git a/drivers/net/ice/ice_switch_filter.h
> > b/drivers/net/ice/ice_switch_filter.h
> > new file mode 100644
> > index 0000000..957d0d1
> > --- /dev/null
> > +++ b/drivers/net/ice/ice_switch_filter.h
> > @@ -0,0 +1,28 @@
>
> Also a license is needed in new file.
Ok, update in v3
>
> BRs,
> Xiao
>
> > +#ifndef _ICE_SWITCH_FILTER_H_
> > +#define _ICE_SWITCH_FILTER_H_
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Qiming Yang
> Sent: Wednesday, June 12, 2019 3:50 PM
> To: dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>
> Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> From: wei zhao <wei.zhao1@intel.com>
>
> The patch enables the backend of rte_flow. It transfers rte_flow_xxx to
> device specific data structure and configures packet process engine's binary
> classifier
> (switch) properly.
>
> Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> ---
> drivers/net/ice/Makefile | 1 +
> drivers/net/ice/ice_ethdev.h | 6 +
> drivers/net/ice/ice_switch_filter.c | 502
> ++++++++++++++++++++++++++++++++++++
> drivers/net/ice/ice_switch_filter.h | 28 ++
> drivers/net/ice/meson.build | 3 +-
> 5 files changed, 539 insertions(+), 1 deletion(-) create mode 100644
> drivers/net/ice/ice_switch_filter.c
> create mode 100644 drivers/net/ice/ice_switch_filter.h
>
> diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile index
> 0e5c55e..b10d826 100644
> --- a/drivers/net/ice/Makefile
> +++ b/drivers/net/ice/Makefile
> @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c endif
>
> +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> ifeq ($(findstring
> RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> CC_AVX2_SUPPORT=1
> else
> diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h index
> 1385afa..67a358a 100644
> --- a/drivers/net/ice/ice_ethdev.h
> +++ b/drivers/net/ice/ice_ethdev.h
> @@ -234,6 +234,12 @@ struct ice_vsi {
> bool offset_loaded;
> };
>
> +/* Struct to store flow created. */
> +struct rte_flow {
> + TAILQ_ENTRY(rte_flow) node;
> +void *rule;
> +};
> +
> struct ice_pf {
> struct ice_adapter *adapter; /* The adapter this PF associate to */
> struct ice_vsi *main_vsi; /* pointer to main VSI structure */ diff --git
> a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
> new file mode 100644
> index 0000000..e679675
> --- /dev/null
> +++ b/drivers/net/ice/ice_switch_filter.c
> @@ -0,0 +1,502 @@
> +#include <sys/queue.h>
> +#include <stdio.h>
> +#include <errno.h>
> +#include <stdint.h>
> +#include <string.h>
> +#include <unistd.h>
> +#include <stdarg.h>
> +
> +#include <rte_debug.h>
> +#include <rte_ether.h>
> +#include <rte_ethdev_driver.h>
> +#include <rte_log.h>
> +#include <rte_malloc.h>
> +#include <rte_eth_ctrl.h>
> +#include <rte_tailq.h>
> +#include <rte_flow_driver.h>
> +
> +#include "ice_logs.h"
> +#include "base/ice_type.h"
> +#include "ice_switch_filter.h"
> +
> +static int
> +ice_parse_switch_filter(
> + const struct rte_flow_item pattern[],
> + const struct rte_flow_action actions[],
> + struct rte_flow_error *error,
> + struct ice_adv_rule_info *rule_info,
> + struct ice_adv_lkup_elem **lkup_list,
> + uint16_t *lkups_num)
> +{
> + const struct rte_flow_item *item = pattern;
> + enum rte_flow_item_type item_type;
> + const struct rte_flow_item_eth *eth_spec, *eth_mask;
> + const struct rte_flow_item_ipv4 *ipv4_spec, *ipv4_mask;
> + const struct rte_flow_item_ipv6 *ipv6_spec, *ipv6_mask;
> + const struct rte_flow_item_tcp *tcp_spec, *tcp_mask;
> + const struct rte_flow_item_udp *udp_spec, *udp_mask;
> + const struct rte_flow_item_sctp *sctp_spec, *sctp_mask;
> + const struct rte_flow_item_nvgre *nvgre_spec, *nvgre_mask;
> + const struct rte_flow_item_vxlan *vxlan_spec, *vxlan_mask;
> + struct ice_adv_lkup_elem *list;
> + uint16_t i, j, t = 0;
> + uint16_t item_num = 0;
> + enum ice_sw_tunnel_type tun_type = ICE_NON_TUN;
> +
> + for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> + if (item->type == RTE_FLOW_ITEM_TYPE_ETH ||
> + item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
> + item->type == RTE_FLOW_ITEM_TYPE_IPV6 ||
> + item->type == RTE_FLOW_ITEM_TYPE_UDP ||
> + item->type == RTE_FLOW_ITEM_TYPE_TCP ||
> + item->type == RTE_FLOW_ITEM_TYPE_SCTP ||
> + item->type == RTE_FLOW_ITEM_TYPE_VXLAN ||
> + item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> + item_num++;
> + }
I think the pattern is verified in generic flow framework, so how about removing the condition here?
...
> +
> +/* By now ice switch filter action code implement only
> +* supports QUEUE or DROP.
> +*/
> +static int
> +ice_parse_switch_action(struct ice_pf *pf,
> + const struct rte_flow_action *actions,
> + struct rte_flow_error *error,
> + struct ice_adv_rule_info *rule_info) {
> + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> + struct ice_vsi *vsi = pf->main_vsi;
> + const struct rte_flow_action *act;
> + const struct rte_flow_action_queue *act_q;
> + uint16_t base_queue, index = 0;
> + uint32_t reg;
> +
> + /* Check if the first non-void action is QUEUE or DROP. */
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> + act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Not supported action.");
> + return -rte_errno;
> + }
> + reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> + if (reg & PFLAN_RX_QALLOC_VALID_M) {
> + base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
> + } else {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Invalid queue register");
> + return -rte_errno;
> + }
> + if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> + act_q = act->conf;
> + rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> + rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> + if (act_q->index >= pf->dev_data->nb_rx_queues) {
> + rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Invalid queue ID for"
> + " switch filter.");
> + return -rte_errno;
> + }
> + } else {
> + rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> + }
> +
> + rule_info->sw_act.vsi_handle = vsi->idx;
> + rule_info->rx = 1;
> + rule_info->sw_act.src = vsi->idx;
> +
> + /* Check if the next non-void item is END */
> + index++;
> + NEXT_ITEM_OF_ACTION(act, actions, index);
> + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> + rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION,
> + act, "Not supported action.");
> + return -rte_errno;
> + }
> +
> + return 0;
> +}
How about use supported array to replace NEXT_ITEM_OF_ACTION? Just like pattern.
> +
> +static int
> +ice_switch_rule_set(struct ice_pf *pf,
> + struct ice_adv_lkup_elem *list,
> + uint16_t lkups_cnt,
> + struct ice_adv_rule_info *rule_info,
> + struct rte_flow *flow)
> +{
> + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> + int ret;
> + struct ice_rule_query_data rule_added = {0};
> + struct ice_rule_query_data *filter_ptr;
> +
> + if (lkups_cnt > ICE_MAX_CHAIN_WORDS) {
> + PMD_DRV_LOG(ERR, "item number too large for rule");
> + return -ENOTSUP;
> + }
> + if (!list) {
> + PMD_DRV_LOG(ERR, "lookup list should not be NULL");
> + return -ENOTSUP;
> + }
> +
> + ret = ice_add_adv_rule(hw, list, lkups_cnt, rule_info, &rule_added);
> +
> + if (!ret) {
> + filter_ptr = rte_zmalloc("ice_switch_filter",
> + sizeof(struct ice_rule_query_data), 0);
> + if (!filter_ptr) {
> + PMD_DRV_LOG(ERR, "failed to allocate memory");
> + return -EINVAL;
> + }
> + flow->rule = filter_ptr;
> + rte_memcpy(filter_ptr,
> + &rule_added,
> + sizeof(struct ice_rule_query_data));
> + }
> +
> + return ret;
> +}
> +
> +int
> +ice_create_switch_filter(struct ice_pf *pf,
> + const struct rte_flow_item pattern[],
> + const struct rte_flow_action actions[],
> + struct rte_flow *flow,
> + struct rte_flow_error *error)
> +{
> + int ret = 0;
> + struct ice_adv_rule_info rule_info = {0};
> + struct ice_adv_lkup_elem *list = NULL;
> + uint16_t lkups_num = 0;
> +
> + ret = ice_parse_switch_filter(pattern, actions, error,
> + &rule_info, &list, &lkups_num);
> + if (ret)
> + goto out;
> +
> + ret = ice_parse_switch_action(pf, actions, error, &rule_info);
> + if (ret)
> + goto out;
> +
> + ret = ice_switch_rule_set(pf, list, lkups_num, &rule_info, flow);
> + if (ret)
> + goto out;
> +
> + rte_free(list);
Why allocate list is not in the function?
> + return 0;
> +
> +out:
> + rte_free(list);
> +
> + return -rte_errno;
> +}
> +
> +int
> +ice_destroy_switch_filter(struct ice_pf *pf,
> + struct rte_flow *flow)
> +{
> + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> + int ret;
> + struct ice_rule_query_data *filter_ptr;
> + struct ice_rule_query_data rule_added;
> +
> + filter_ptr = (struct ice_rule_query_data *)
> + flow->rule;
> + rte_memcpy(&rule_added, filter_ptr,
> + sizeof(struct ice_rule_query_data));
> +
> + if (!filter_ptr) {
> + PMD_DRV_LOG(ERR, "no such flow"
> + " create by switch filter");
> + return -EINVAL;
> + }
How about add struct rte_flow_error *error as the parameter, and use rte_flow_error_set here?
> +
> + ret = ice_rem_adv_rule_by_id(hw, &rule_added);
> +
> + rte_free(filter_ptr);
> +
> + return ret;
> +}
> +
> +void
> +ice_free_switch_filter_rule(void *rule) {
> + struct ice_rule_query_data *filter_ptr;
> +
> + filter_ptr = (struct ice_rule_query_data *)rule;
> +
> + rte_free(filter_ptr);
> +}
> diff --git a/drivers/net/ice/ice_switch_filter.h
> b/drivers/net/ice/ice_switch_filter.h
> new file mode 100644
> index 0000000..957d0d1
> --- /dev/null
> +++ b/drivers/net/ice/ice_switch_filter.h
> @@ -0,0 +1,28 @@
> +#ifndef _ICE_SWITCH_FILTER_H_
> +#define _ICE_SWITCH_FILTER_H_
> +
> +#include "base/ice_switch.h"
> +#include "base/ice_type.h"
> +#include "ice_ethdev.h"
> +
> +#define NEXT_ITEM_OF_ACTION(act, actions, index) \
> + do { \
> + act = actions + index; \
> + while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
> + index++; \
> + act = actions + index; \
> + } \
> + } while (0)
> +
> +int
> +ice_create_switch_filter(struct ice_pf *pf,
> + const struct rte_flow_item pattern[],
> + const struct rte_flow_action actions[],
> + struct rte_flow *flow,
> + struct rte_flow_error *error);
> +int
> +ice_destroy_switch_filter(struct ice_pf *pf,
> + struct rte_flow *flow);
> +void
> +ice_free_switch_filter_rule(void *rule); #endif /*
> +_ICE_SWITCH_FILTER_H_ */
> diff --git a/drivers/net/ice/meson.build b/drivers/net/ice/meson.build index
> 2bec688..8697676 100644
> --- a/drivers/net/ice/meson.build
> +++ b/drivers/net/ice/meson.build
> @@ -6,7 +6,8 @@ objs = [base_objs]
>
> sources = files(
> 'ice_ethdev.c',
> - 'ice_rxtx.c'
> + 'ice_rxtx.c',
> + 'ice_switch_filter.c'
> )
>
> deps += ['hash']
> --
> 2.9.5
Hi, beilei
> -----Original Message-----
> From: Xing, Beilei
> Sent: Monday, June 17, 2019 1:27 PM
> To: Yang, Qiming <qiming.yang@intel.com>; dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
>
>
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Qiming Yang
> > Sent: Wednesday, June 12, 2019 3:50 PM
> > To: dev@dpdk.org
> > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> >
> > From: wei zhao <wei.zhao1@intel.com>
> >
> > The patch enables the backend of rte_flow. It transfers rte_flow_xxx
> > to device specific data structure and configures packet process
> > engine's binary classifier
> > (switch) properly.
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
> > drivers/net/ice/Makefile | 1 +
> > drivers/net/ice/ice_ethdev.h | 6 +
> > drivers/net/ice/ice_switch_filter.c | 502
> > ++++++++++++++++++++++++++++++++++++
> > drivers/net/ice/ice_switch_filter.h | 28 ++
> > drivers/net/ice/meson.build | 3 +-
> > 5 files changed, 539 insertions(+), 1 deletion(-) create mode 100644
> > drivers/net/ice/ice_switch_filter.c
> > create mode 100644 drivers/net/ice/ice_switch_filter.h
> >
> > diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile index
> > 0e5c55e..b10d826 100644
> > --- a/drivers/net/ice/Makefile
> > +++ b/drivers/net/ice/Makefile
> > @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> > SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c endif
> >
> > +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> > ifeq ($(findstring
> > RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> > CC_AVX2_SUPPORT=1
> > else
> > diff --git a/drivers/net/ice/ice_ethdev.h
> > b/drivers/net/ice/ice_ethdev.h index 1385afa..67a358a 100644
> > --- a/drivers/net/ice/ice_ethdev.h
> > +++ b/drivers/net/ice/ice_ethdev.h
> > @@ -234,6 +234,12 @@ struct ice_vsi {
> > bool offset_loaded;
> > };
> >
> > +/* Struct to store flow created. */
> > +struct rte_flow {
> > + TAILQ_ENTRY(rte_flow) node;
> > +void *rule;
> > +};
> > +
> > struct ice_pf {
> > struct ice_adapter *adapter; /* The adapter this PF associate to */
> > struct ice_vsi *main_vsi; /* pointer to main VSI structure */ diff
> > --git a/drivers/net/ice/ice_switch_filter.c
> > b/drivers/net/ice/ice_switch_filter.c
> > new file mode 100644
> > index 0000000..e679675
> > --- /dev/null
> > +++ b/drivers/net/ice/ice_switch_filter.c
> > @@ -0,0 +1,502 @@
> > +#include <sys/queue.h>
> > +#include <stdio.h>
> > +#include <errno.h>
> > +#include <stdint.h>
> > +#include <string.h>
> > +#include <unistd.h>
> > +#include <stdarg.h>
> > +
> > +#include <rte_debug.h>
> > +#include <rte_ether.h>
> > +#include <rte_ethdev_driver.h>
> > +#include <rte_log.h>
> > +#include <rte_malloc.h>
> > +#include <rte_eth_ctrl.h>
> > +#include <rte_tailq.h>
> > +#include <rte_flow_driver.h>
> > +
> > +#include "ice_logs.h"
> > +#include "base/ice_type.h"
> > +#include "ice_switch_filter.h"
> > +
> > +static int
> > +ice_parse_switch_filter(
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[],
> > + struct rte_flow_error *error,
> > + struct ice_adv_rule_info *rule_info,
> > + struct ice_adv_lkup_elem **lkup_list,
> > + uint16_t *lkups_num)
> > +{
> > + const struct rte_flow_item *item = pattern;
> > + enum rte_flow_item_type item_type;
> > + const struct rte_flow_item_eth *eth_spec, *eth_mask;
> > + const struct rte_flow_item_ipv4 *ipv4_spec, *ipv4_mask;
> > + const struct rte_flow_item_ipv6 *ipv6_spec, *ipv6_mask;
> > + const struct rte_flow_item_tcp *tcp_spec, *tcp_mask;
> > + const struct rte_flow_item_udp *udp_spec, *udp_mask;
> > + const struct rte_flow_item_sctp *sctp_spec, *sctp_mask;
> > + const struct rte_flow_item_nvgre *nvgre_spec, *nvgre_mask;
> > + const struct rte_flow_item_vxlan *vxlan_spec, *vxlan_mask;
> > + struct ice_adv_lkup_elem *list;
> > + uint16_t i, j, t = 0;
> > + uint16_t item_num = 0;
> > + enum ice_sw_tunnel_type tun_type = ICE_NON_TUN;
> > +
> > + for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> > + if (item->type == RTE_FLOW_ITEM_TYPE_ETH ||
> > + item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
> > + item->type == RTE_FLOW_ITEM_TYPE_IPV6 ||
> > + item->type == RTE_FLOW_ITEM_TYPE_UDP ||
> > + item->type == RTE_FLOW_ITEM_TYPE_TCP ||
> > + item->type == RTE_FLOW_ITEM_TYPE_SCTP ||
> > + item->type == RTE_FLOW_ITEM_TYPE_VXLAN ||
> > + item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
> > + item_num++;
> > + }
>
> I think the pattern is verified in generic flow framework, so how about
> removing the condition here?
This is not verfy, just get the number of item_num to malloc memory for list
>
> ...
>
> > +
> > +/* By now ice switch filter action code implement only
> > +* supports QUEUE or DROP.
> > +*/
> > +static int
> > +ice_parse_switch_action(struct ice_pf *pf,
> > + const struct rte_flow_action *actions,
> > + struct rte_flow_error *error,
> > + struct ice_adv_rule_info *rule_info) {
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + struct ice_vsi *vsi = pf->main_vsi;
> > + const struct rte_flow_action *act;
> > + const struct rte_flow_action_queue *act_q;
> > + uint16_t base_queue, index = 0;
> > + uint32_t reg;
> > +
> > + /* Check if the first non-void action is QUEUE or DROP. */
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> > + act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > + reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> > + if (reg & PFLAN_RX_QALLOC_VALID_M) {
> > + base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
> > + } else {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Invalid queue register");
> > + return -rte_errno;
> > + }
> > + if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> > + act_q = act->conf;
> > + rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> > + rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> > + if (act_q->index >= pf->dev_data->nb_rx_queues) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Invalid queue ID for"
> > + " switch filter.");
> > + return -rte_errno;
> > + }
> > + } else {
> > + rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> > + }
> > +
> > + rule_info->sw_act.vsi_handle = vsi->idx;
> > + rule_info->rx = 1;
> > + rule_info->sw_act.src = vsi->idx;
> > +
> > + /* Check if the next non-void item is END */
> > + index++;
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > +
> > + return 0;
> > +}
>
>
> How about use supported array to replace NEXT_ITEM_OF_ACTION? Just like
> pattern.
Ok, updated in v3
>
>
> > +
> > +static int
> > +ice_switch_rule_set(struct ice_pf *pf,
> > + struct ice_adv_lkup_elem *list,
> > + uint16_t lkups_cnt,
> > + struct ice_adv_rule_info *rule_info,
> > + struct rte_flow *flow)
> > +{
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + int ret;
> > + struct ice_rule_query_data rule_added = {0};
> > + struct ice_rule_query_data *filter_ptr;
> > +
> > + if (lkups_cnt > ICE_MAX_CHAIN_WORDS) {
> > + PMD_DRV_LOG(ERR, "item number too large for rule");
> > + return -ENOTSUP;
> > + }
> > + if (!list) {
> > + PMD_DRV_LOG(ERR, "lookup list should not be NULL");
> > + return -ENOTSUP;
> > + }
> > +
> > + ret = ice_add_adv_rule(hw, list, lkups_cnt, rule_info, &rule_added);
> > +
> > + if (!ret) {
> > + filter_ptr = rte_zmalloc("ice_switch_filter",
> > + sizeof(struct ice_rule_query_data), 0);
> > + if (!filter_ptr) {
> > + PMD_DRV_LOG(ERR, "failed to allocate memory");
> > + return -EINVAL;
> > + }
> > + flow->rule = filter_ptr;
> > + rte_memcpy(filter_ptr,
> > + &rule_added,
> > + sizeof(struct ice_rule_query_data));
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +int
> > +ice_create_switch_filter(struct ice_pf *pf,
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[],
> > + struct rte_flow *flow,
> > + struct rte_flow_error *error)
> > +{
> > + int ret = 0;
> > + struct ice_adv_rule_info rule_info = {0};
> > + struct ice_adv_lkup_elem *list = NULL;
> > + uint16_t lkups_num = 0;
> > +
> > + ret = ice_parse_switch_filter(pattern, actions, error,
> > + &rule_info, &list, &lkups_num);
> > + if (ret)
> > + goto out;
> > +
> > + ret = ice_parse_switch_action(pf, actions, error, &rule_info);
> > + if (ret)
> > + goto out;
> > +
> > + ret = ice_switch_rule_set(pf, list, lkups_num, &rule_info, flow);
> > + if (ret)
> > + goto out;
> > +
> > + rte_free(list);
>
> Why allocate list is not in the function?
Because I don't know the size, just as the comment before.
>
> > + return 0;
> > +
> > +out:
> > + rte_free(list);
> > +
> > + return -rte_errno;
> > +}
> > +
> > +int
> > +ice_destroy_switch_filter(struct ice_pf *pf,
> > + struct rte_flow *flow)
> > +{
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + int ret;
> > + struct ice_rule_query_data *filter_ptr;
> > + struct ice_rule_query_data rule_added;
> > +
> > + filter_ptr = (struct ice_rule_query_data *)
> > + flow->rule;
> > + rte_memcpy(&rule_added, filter_ptr,
> > + sizeof(struct ice_rule_query_data));
> > +
> > + if (!filter_ptr) {
> > + PMD_DRV_LOG(ERR, "no such flow"
> > + " create by switch filter");
> > + return -EINVAL;
> > + }
>
> How about add struct rte_flow_error *error as the parameter, and use
> rte_flow_error_set here?
Ok, updated in v3
>
> > +
> > + ret = ice_rem_adv_rule_by_id(hw, &rule_added);
> > +
> > + rte_free(filter_ptr);
> > +
> > + return ret;
> > +}
> > +
> > +void
> > +ice_free_switch_filter_rule(void *rule) {
> > + struct ice_rule_query_data *filter_ptr;
> > +
> > + filter_ptr = (struct ice_rule_query_data *)rule;
> > +
> > + rte_free(filter_ptr);
> > +}
> > diff --git a/drivers/net/ice/ice_switch_filter.h
> > b/drivers/net/ice/ice_switch_filter.h
> > new file mode 100644
> > index 0000000..957d0d1
> > --- /dev/null
> > +++ b/drivers/net/ice/ice_switch_filter.h
> > @@ -0,0 +1,28 @@
> > +#ifndef _ICE_SWITCH_FILTER_H_
> > +#define _ICE_SWITCH_FILTER_H_
> > +
> > +#include "base/ice_switch.h"
> > +#include "base/ice_type.h"
> > +#include "ice_ethdev.h"
> > +
> > +#define NEXT_ITEM_OF_ACTION(act, actions, index) \
> > + do { \
> > + act = actions + index; \
> > + while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
> > + index++; \
> > + act = actions + index; \
> > + } \
> > + } while (0)
> > +
> > +int
> > +ice_create_switch_filter(struct ice_pf *pf,
> > + const struct rte_flow_item pattern[],
> > + const struct rte_flow_action actions[],
> > + struct rte_flow *flow,
> > + struct rte_flow_error *error);
> > +int
> > +ice_destroy_switch_filter(struct ice_pf *pf,
> > + struct rte_flow *flow);
> > +void
> > +ice_free_switch_filter_rule(void *rule); #endif /*
> > +_ICE_SWITCH_FILTER_H_ */
> > diff --git a/drivers/net/ice/meson.build b/drivers/net/ice/meson.build
> > index
> > 2bec688..8697676 100644
> > --- a/drivers/net/ice/meson.build
> > +++ b/drivers/net/ice/meson.build
> > @@ -6,7 +6,8 @@ objs = [base_objs]
> >
> > sources = files(
> > 'ice_ethdev.c',
> > - 'ice_rxtx.c'
> > + 'ice_rxtx.c',
> > + 'ice_switch_filter.c'
> > )
> >
> > deps += ['hash']
> > --
> > 2.9.5
Hi Wei,
> -----Original Message-----
> From: Zhao1, Wei
> Sent: Friday, June 14, 2019 5:47 PM
> To: Wang, Xiao W <xiao.w.wang@intel.com>; Yang, Qiming
> <qiming.yang@intel.com>; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> Hi， xiao
>
> > -----Original Message-----
> > From: Wang, Xiao W
> > Sent: Thursday, June 13, 2019 4:24 PM
> > To: Yang, Qiming <qiming.yang@intel.com>; dev@dpdk.org
> > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> >
> > Hi,
> >
> > > -----Original Message-----
> > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Qiming Yang
> > > Sent: Wednesday, June 12, 2019 3:50 PM
> > > To: dev@dpdk.org
> > > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > > Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> > >
> > > From: wei zhao <wei.zhao1@intel.com>
> > >
> > > The patch enables the backend of rte_flow. It transfers rte_flow_xxx
> > > to device specific data structure and configures packet process
> > > engine's binary classifier
> > > (switch) properly.
> > >
> > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > > ---
> > > drivers/net/ice/Makefile | 1 +
> > > drivers/net/ice/ice_ethdev.h | 6 +
> > > drivers/net/ice/ice_switch_filter.c | 502
> > > ++++++++++++++++++++++++++++++++++++
> > > drivers/net/ice/ice_switch_filter.h | 28 ++
> > > drivers/net/ice/meson.build | 3 +-
> > > 5 files changed, 539 insertions(+), 1 deletion(-) create mode 100644
> > > drivers/net/ice/ice_switch_filter.c
> > > create mode 100644 drivers/net/ice/ice_switch_filter.h
> > >
> > > diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile index
> > > 0e5c55e..b10d826 100644
> > > --- a/drivers/net/ice/Makefile
> > > +++ b/drivers/net/ice/Makefile
> > > @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> > > SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c endif
> > >
> > > +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> > > ifeq ($(findstring
> > >
> RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> > > CC_AVX2_SUPPORT=1
> > > else
> > > diff --git a/drivers/net/ice/ice_ethdev.h
> > > b/drivers/net/ice/ice_ethdev.h index 1385afa..67a358a 100644
> > > --- a/drivers/net/ice/ice_ethdev.h
> > > +++ b/drivers/net/ice/ice_ethdev.h
> > > @@ -234,6 +234,12 @@ struct ice_vsi {
> > > bool offset_loaded;
> > > };
> > >
> > > +/* Struct to store flow created. */
> > > +struct rte_flow {
> > > + TAILQ_ENTRY(rte_flow) node;
> > > +void *rule;
> > > +};
> > > +
> > > struct ice_pf {
> > > struct ice_adapter *adapter; /* The adapter this PF associate to */
> > > struct ice_vsi *main_vsi; /* pointer to main VSI structure */ diff
> > > --git a/drivers/net/ice/ice_switch_filter.c
> > > b/drivers/net/ice/ice_switch_filter.c
> > > new file mode 100644
> > > index 0000000..e679675
> > > --- /dev/null
> > > +++ b/drivers/net/ice/ice_switch_filter.c
[...]
> > > + RTE_FLOW_ITEM_TYPE_END; item++, i++) {
> >
> > It seems we don't need the "i" variable.
>
> Ok, Updated in v3
>
> >
> > > + item_type = item->type;
> > > +
> > > + switch (item_type) {
> > > + case RTE_FLOW_ITEM_TYPE_ETH:
> > > + eth_spec = item->spec;
> > > + eth_mask = item->mask;
> > > + if (eth_spec && eth_mask) {
> > > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > > + ICE_MAC_OFOS : ICE_MAC_IL;
> > > + for (j = 0; j < RTE_ETHER_ADDR_LEN; j++) {
> > > + if (eth_mask->src.addr_bytes[j] ==
> > > + UINT8_MAX) {
> > > + list[t].h_u.eth_hdr.
> > > + src_addr[j] =
> > > + eth_spec->src.addr_bytes[j];
> > > + list[t].m_u.eth_hdr.
> > > + src_addr[j] =
> > > + eth_mask->src.addr_bytes[j];
> > > + }
> > > + if (eth_mask->dst.addr_bytes[j] ==
> > > + UINT8_MAX) {
> > > + list[t].h_u.eth_hdr.
> > > + dst_addr[j] =
> > > + eth_spec->dst.addr_bytes[j];
> > > + list[t].m_u.eth_hdr.
> > > + dst_addr[j] =
> > > + eth_mask->dst.addr_bytes[j];
> > > + }
> > > + }
> > > + if (eth_mask->type == UINT16_MAX) {
> > > + list[t].h_u.eth_hdr.ethtype_id =
> > > + rte_be_to_cpu_16(eth_spec->type);
> > > + list[t].m_u.eth_hdr.ethtype_id =
> > > + UINT16_MAX;
> > > + }
> > > + t++;
> >
> > A lot of "t++" below, can we move it outside the switch{ } to have only one
> "t++"?
>
> By now, we can not, because share code can not handle if (!eth_spec
> && !eth_mask) case, if we t++
> For that case, that item will put into list[t], and share code will report error.
The blow "else if" branch has no effect at all, we can just remove it.
BRs,
Xiao
> >
> > > + } else if (!eth_spec && !eth_mask) {
> > > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > > + ICE_MAC_OFOS : ICE_MAC_IL;
> > > + }
> > > + break;
[...]
Hi , Beilei
> -----Original Message-----
> From: Xing, Beilei
> Sent: Monday, June 17, 2019 1:27 PM
> To: Yang, Qiming <qiming.yang@intel.com>; dev@dpdk.org
> Cc: Zhao1, Wei <wei.zhao1@intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
>
>
> ...
>
> > +
> > +/* By now ice switch filter action code implement only
> > +* supports QUEUE or DROP.
> > +*/
> > +static int
> > +ice_parse_switch_action(struct ice_pf *pf,
> > + const struct rte_flow_action *actions,
> > + struct rte_flow_error *error,
> > + struct ice_adv_rule_info *rule_info) {
> > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > + struct ice_vsi *vsi = pf->main_vsi;
> > + const struct rte_flow_action *act;
> > + const struct rte_flow_action_queue *act_q;
> > + uint16_t base_queue, index = 0;
> > + uint32_t reg;
> > +
> > + /* Check if the first non-void action is QUEUE or DROP. */
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> > + act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > + reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> > + if (reg & PFLAN_RX_QALLOC_VALID_M) {
> > + base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
> > + } else {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Invalid queue register");
> > + return -rte_errno;
> > + }
> > + if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> > + act_q = act->conf;
> > + rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> > + rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> > + if (act_q->index >= pf->dev_data->nb_rx_queues) {
> > + rte_flow_error_set(error, EINVAL,
> > + RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Invalid queue ID for"
> > + " switch filter.");
> > + return -rte_errno;
> > + }
> > + } else {
> > + rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> > + }
> > +
> > + rule_info->sw_act.vsi_handle = vsi->idx;
> > + rule_info->rx = 1;
> > + rule_info->sw_act.src = vsi->idx;
> > +
> > + /* Check if the next non-void item is END */
> > + index++;
> > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> > + rte_flow_error_set(error, EINVAL,
> > RTE_FLOW_ERROR_TYPE_ACTION,
> > + act, "Not supported action.");
> > + return -rte_errno;
> > + }
> > +
> > + return 0;
> > +}
>
>
> How about use supported array to replace NEXT_ITEM_OF_ACTION? Just like
> pattern.
This seems no need to change, i40e also implement in this way.
Hi Wei,
> -----Original Message-----
> From: Zhao1, Wei
> Sent: Monday, June 17, 2019 4:52 PM
> To: Xing, Beilei <beilei.xing@intel.com>; Yang, Qiming
> <qiming.yang@intel.com>; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> Hi , Beilei
>
>
> > -----Original Message-----
> > From: Xing, Beilei
> > Sent: Monday, June 17, 2019 1:27 PM
> > To: Yang, Qiming <qiming.yang@intel.com>; dev@dpdk.org
> > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> >
> >
> >
> > ...
> >
> > > +
> > > +/* By now ice switch filter action code implement only
> > > +* supports QUEUE or DROP.
> > > +*/
> > > +static int
> > > +ice_parse_switch_action(struct ice_pf *pf,
> > > + const struct rte_flow_action *actions,
> > > + struct rte_flow_error *error,
> > > + struct ice_adv_rule_info *rule_info) {
> > > + struct ice_hw *hw = ICE_PF_TO_HW(pf);
> > > + struct ice_vsi *vsi = pf->main_vsi;
> > > + const struct rte_flow_action *act;
> > > + const struct rte_flow_action_queue *act_q;
> > > + uint16_t base_queue, index = 0;
> > > + uint32_t reg;
> > > +
> > > + /* Check if the first non-void action is QUEUE or DROP. */
> > > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > > + if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
> > > + act->type != RTE_FLOW_ACTION_TYPE_DROP) {
> > > + rte_flow_error_set(error, EINVAL,
> > > RTE_FLOW_ERROR_TYPE_ACTION,
> > > + act, "Not supported action.");
> > > + return -rte_errno;
> > > + }
> > > + reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
> > > + if (reg & PFLAN_RX_QALLOC_VALID_M) {
> > > + base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
> > > + } else {
> > > + rte_flow_error_set(error, EINVAL,
> > > + RTE_FLOW_ERROR_TYPE_ACTION,
> > > + act, "Invalid queue register");
> > > + return -rte_errno;
> > > + }
> > > + if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
> > > + act_q = act->conf;
> > > + rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
> > > + rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
> > > + if (act_q->index >= pf->dev_data->nb_rx_queues) {
> > > + rte_flow_error_set(error, EINVAL,
> > > + RTE_FLOW_ERROR_TYPE_ACTION,
> > > + act, "Invalid queue ID for"
> > > + " switch filter.");
> > > + return -rte_errno;
> > > + }
> > > + } else {
> > > + rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
> > > + }
> > > +
> > > + rule_info->sw_act.vsi_handle = vsi->idx;
> > > + rule_info->rx = 1;
> > > + rule_info->sw_act.src = vsi->idx;
> > > +
> > > + /* Check if the next non-void item is END */
> > > + index++;
> > > + NEXT_ITEM_OF_ACTION(act, actions, index);
> > > + if (act->type != RTE_FLOW_ACTION_TYPE_END) {
> > > + rte_flow_error_set(error, EINVAL,
> > > RTE_FLOW_ERROR_TYPE_ACTION,
> > > + act, "Not supported action.");
> > > + return -rte_errno;
> > > + }
> > > +
> > > + return 0;
> > > +}
> >
> >
> > How about use supported array to replace NEXT_ITEM_OF_ACTION? Just
> > like pattern.
>
> This seems no need to change, i40e also implement in this way.
Code in I40e is not perfect, we can try to improve our PMD in new driver.
I think supported array is more clear and friendly, what do you think?
> -----Original Message-----
> From: Wang, Xiao W
> Sent: Monday, June 17, 2019 4:28 PM
> To: Zhao1, Wei <wei.zhao1@intel.com>; Yang, Qiming
> <qiming.yang@intel.com>; dev@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> Hi Wei,
>
> > -----Original Message-----
> > From: Zhao1, Wei
> > Sent: Friday, June 14, 2019 5:47 PM
> > To: Wang, Xiao W <xiao.w.wang@intel.com>; Yang, Qiming
> > <qiming.yang@intel.com>; dev@dpdk.org
> > Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> >
> > Hi， xiao
> >
> > > -----Original Message-----
> > > From: Wang, Xiao W
> > > Sent: Thursday, June 13, 2019 4:24 PM
> > > To: Yang, Qiming <qiming.yang@intel.com>; dev@dpdk.org
> > > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > > Subject: RE: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> > >
> > > Hi,
> > >
> > > > -----Original Message-----
> > > > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Qiming Yang
> > > > Sent: Wednesday, June 12, 2019 3:50 PM
> > > > To: dev@dpdk.org
> > > > Cc: Zhao1, Wei <wei.zhao1@intel.com>
> > > > Subject: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
> > > >
> > > > From: wei zhao <wei.zhao1@intel.com>
> > > >
> > > > The patch enables the backend of rte_flow. It transfers
> > > > rte_flow_xxx to device specific data structure and configures
> > > > packet process engine's binary classifier
> > > > (switch) properly.
> > > >
> > > > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > > > ---
> > > > drivers/net/ice/Makefile | 1 +
> > > > drivers/net/ice/ice_ethdev.h | 6 +
> > > > drivers/net/ice/ice_switch_filter.c | 502
> > > > ++++++++++++++++++++++++++++++++++++
> > > > drivers/net/ice/ice_switch_filter.h | 28 ++
> > > > drivers/net/ice/meson.build | 3 +-
> > > > 5 files changed, 539 insertions(+), 1 deletion(-) create mode
> > > > 100644 drivers/net/ice/ice_switch_filter.c
> > > > create mode 100644 drivers/net/ice/ice_switch_filter.h
> > > >
> > > > diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile
> > > > index
> > > > 0e5c55e..b10d826 100644
> > > > --- a/drivers/net/ice/Makefile
> > > > +++ b/drivers/net/ice/Makefile
> > > > @@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> > > > SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c endif
> > > >
> > > > +SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> > > > ifeq ($(findstring
> > > >
> > RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> > > > CC_AVX2_SUPPORT=1
> > > > else
> > > > diff --git a/drivers/net/ice/ice_ethdev.h
> > > > b/drivers/net/ice/ice_ethdev.h index 1385afa..67a358a 100644
> > > > --- a/drivers/net/ice/ice_ethdev.h
> > > > +++ b/drivers/net/ice/ice_ethdev.h
> > > > @@ -234,6 +234,12 @@ struct ice_vsi {
> > > > bool offset_loaded;
> > > > };
> > > >
> > > > +/* Struct to store flow created. */ struct rte_flow {
> > > > + TAILQ_ENTRY(rte_flow) node;
> > > > +void *rule;
> > > > +};
> > > > +
> > > > struct ice_pf {
> > > > struct ice_adapter *adapter; /* The adapter this PF associate to */
> > > > struct ice_vsi *main_vsi; /* pointer to main VSI structure */
> > > > diff --git a/drivers/net/ice/ice_switch_filter.c
> > > > b/drivers/net/ice/ice_switch_filter.c
> > > > new file mode 100644
> > > > index 0000000..e679675
> > > > --- /dev/null
> > > > +++ b/drivers/net/ice/ice_switch_filter.c
> [...]
>
> > > > + RTE_FLOW_ITEM_TYPE_END; item++, i++) {
> > >
> > > It seems we don't need the "i" variable.
> >
> > Ok, Updated in v3
> >
> > >
> > > > + item_type = item->type;
> > > > +
> > > > + switch (item_type) {
> > > > + case RTE_FLOW_ITEM_TYPE_ETH:
> > > > + eth_spec = item->spec;
> > > > + eth_mask = item->mask;
> > > > + if (eth_spec && eth_mask) {
> > > > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > > > + ICE_MAC_OFOS : ICE_MAC_IL;
> > > > + for (j = 0; j < RTE_ETHER_ADDR_LEN; j++) {
> > > > + if (eth_mask->src.addr_bytes[j] ==
> > > > + UINT8_MAX) {
> > > > + list[t].h_u.eth_hdr.
> > > > + src_addr[j] =
> > > > + eth_spec->src.addr_bytes[j];
> > > > + list[t].m_u.eth_hdr.
> > > > + src_addr[j] =
> > > > + eth_mask->src.addr_bytes[j];
> > > > + }
> > > > + if (eth_mask->dst.addr_bytes[j] ==
> > > > + UINT8_MAX) {
> > > > + list[t].h_u.eth_hdr.
> > > > + dst_addr[j] =
> > > > + eth_spec->dst.addr_bytes[j];
> > > > + list[t].m_u.eth_hdr.
> > > > + dst_addr[j] =
> > > > + eth_mask->dst.addr_bytes[j];
> > > > + }
> > > > + }
> > > > + if (eth_mask->type == UINT16_MAX) {
> > > > + list[t].h_u.eth_hdr.ethtype_id =
> > > > + rte_be_to_cpu_16(eth_spec->type);
> > > > + list[t].m_u.eth_hdr.ethtype_id =
> > > > + UINT16_MAX;
> > > > + }
> > > > + t++;
> > >
> > > A lot of "t++" below, can we move it outside the switch{ } to have
> > > only one
> > "t++"?
> >
> > By now, we can not, because share code can not handle if (!eth_spec
> > && !eth_mask) case, if we t++ For that case, that item will put into
> > list[t], and share code will report error.
>
> The blow "else if" branch has no effect at all, we can just remove it.
I suggest not, because ND is fix this issue now, if updated share code will support this soon in this release.
>
> BRs,
> Xiao
>
> > >
> > > > + } else if (!eth_spec && !eth_mask) {
> > > > + list[t].type = (tun_type == ICE_NON_TUN) ?
> > > > + ICE_MAC_OFOS : ICE_MAC_IL;
> > > > + }
> > > > + break;
> [...]
On 06/12, Qiming Yang wrote:
>From: wei zhao <wei.zhao1@intel.com>
>
>The patch enables the backend of rte_flow. It transfers
>rte_flow_xxx to device specific data structure and
>configures packet process engine's binary classifier
>(switch) properly.
>
>Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
>---
> drivers/net/ice/Makefile | 1 +
> drivers/net/ice/ice_ethdev.h | 6 +
> drivers/net/ice/ice_switch_filter.c | 502 ++++++++++++++++++++++++++++++++++++
> drivers/net/ice/ice_switch_filter.h | 28 ++
> drivers/net/ice/meson.build | 3 +-
> 5 files changed, 539 insertions(+), 1 deletion(-)
> create mode 100644 drivers/net/ice/ice_switch_filter.c
> create mode 100644 drivers/net/ice/ice_switch_filter.h
>
>diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile
>index 0e5c55e..b10d826 100644
>--- a/drivers/net/ice/Makefile
>+++ b/drivers/net/ice/Makefile
>@@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c
> endif
>
>+SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> ifeq ($(findstring RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> CC_AVX2_SUPPORT=1
> else
>diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
>index 1385afa..67a358a 100644
>--- a/drivers/net/ice/ice_ethdev.h
>+++ b/drivers/net/ice/ice_ethdev.h
>@@ -234,6 +234,12 @@ struct ice_vsi {
> bool offset_loaded;
> };
>
>+/* Struct to store flow created. */
>+struct rte_flow {
>+ TAILQ_ENTRY(rte_flow) node;
>+void *rule;
Minor nit: An indentation is needed before void.
Thanks,
Xiaolong
Hi, xiaolong
> -----Original Message-----
> From: Ye, Xiaolong
> Sent: Tuesday, June 18, 2019 5:41 PM
> To: Yang, Qiming <qiming.yang@intel.com>
> Cc: dev@dpdk.org; Zhao1, Wei <wei.zhao1@intel.com>
> Subject: Re: [dpdk-dev] [PATCH v2 1/3] net/ice: enable switch filter
>
> On 06/12, Qiming Yang wrote:
> >From: wei zhao <wei.zhao1@intel.com>
> >
> >The patch enables the backend of rte_flow. It transfers rte_flow_xxx to
> >device specific data structure and configures packet process engine's
> >binary classifier
> >(switch) properly.
> >
> >Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> >---
> > drivers/net/ice/Makefile | 1 +
> > drivers/net/ice/ice_ethdev.h | 6 +
> > drivers/net/ice/ice_switch_filter.c | 502
> >++++++++++++++++++++++++++++++++++++
> > drivers/net/ice/ice_switch_filter.h | 28 ++
> > drivers/net/ice/meson.build | 3 +-
> > 5 files changed, 539 insertions(+), 1 deletion(-) create mode 100644
> >drivers/net/ice/ice_switch_filter.c
> > create mode 100644 drivers/net/ice/ice_switch_filter.h
> >
> >diff --git a/drivers/net/ice/Makefile b/drivers/net/ice/Makefile index
> >0e5c55e..b10d826 100644
> >--- a/drivers/net/ice/Makefile
> >+++ b/drivers/net/ice/Makefile
> >@@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
> > SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c endif
> >
> >+SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
> > ifeq ($(findstring
> RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
> > CC_AVX2_SUPPORT=1
> > else
> >diff --git a/drivers/net/ice/ice_ethdev.h
> >b/drivers/net/ice/ice_ethdev.h index 1385afa..67a358a 100644
> >--- a/drivers/net/ice/ice_ethdev.h
> >+++ b/drivers/net/ice/ice_ethdev.h
> >@@ -234,6 +234,12 @@ struct ice_vsi {
> > bool offset_loaded;
> > };
> >
> >+/* Struct to store flow created. */
> >+struct rte_flow {
> >+ TAILQ_ENTRY(rte_flow) node;
> >+void *rule;
>
> Minor nit: An indentation is needed before void.
Ok, Update in v3
>
> Thanks,
> Xiaolong
@@ -60,6 +60,7 @@ ifeq ($(CONFIG_RTE_ARCH_X86), y)
SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_rxtx_vec_sse.c
endif
+SRCS-$(CONFIG_RTE_LIBRTE_ICE_PMD) += ice_switch_filter.c
ifeq ($(findstring RTE_MACHINE_CPUFLAG_AVX2,$(CFLAGS)),RTE_MACHINE_CPUFLAG_AVX2)
CC_AVX2_SUPPORT=1
else
@@ -234,6 +234,12 @@ struct ice_vsi {
bool offset_loaded;
};
+/* Struct to store flow created. */
+struct rte_flow {
+ TAILQ_ENTRY(rte_flow) node;
+void *rule;
+};
+
struct ice_pf {
struct ice_adapter *adapter; /* The adapter this PF associate to */
struct ice_vsi *main_vsi; /* pointer to main VSI structure */
new file mode 100644
@@ -0,0 +1,502 @@
+#include <sys/queue.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdarg.h>
+
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev_driver.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+#include <rte_eth_ctrl.h>
+#include <rte_tailq.h>
+#include <rte_flow_driver.h>
+
+#include "ice_logs.h"
+#include "base/ice_type.h"
+#include "ice_switch_filter.h"
+
+static int
+ice_parse_switch_filter(
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow_error *error,
+ struct ice_adv_rule_info *rule_info,
+ struct ice_adv_lkup_elem **lkup_list,
+ uint16_t *lkups_num)
+{
+ const struct rte_flow_item *item = pattern;
+ enum rte_flow_item_type item_type;
+ const struct rte_flow_item_eth *eth_spec, *eth_mask;
+ const struct rte_flow_item_ipv4 *ipv4_spec, *ipv4_mask;
+ const struct rte_flow_item_ipv6 *ipv6_spec, *ipv6_mask;
+ const struct rte_flow_item_tcp *tcp_spec, *tcp_mask;
+ const struct rte_flow_item_udp *udp_spec, *udp_mask;
+ const struct rte_flow_item_sctp *sctp_spec, *sctp_mask;
+ const struct rte_flow_item_nvgre *nvgre_spec, *nvgre_mask;
+ const struct rte_flow_item_vxlan *vxlan_spec, *vxlan_mask;
+ struct ice_adv_lkup_elem *list;
+ uint16_t i, j, t = 0;
+ uint16_t item_num = 0;
+ enum ice_sw_tunnel_type tun_type = ICE_NON_TUN;
+
+ for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
+ if (item->type == RTE_FLOW_ITEM_TYPE_ETH ||
+ item->type == RTE_FLOW_ITEM_TYPE_IPV4 ||
+ item->type == RTE_FLOW_ITEM_TYPE_IPV6 ||
+ item->type == RTE_FLOW_ITEM_TYPE_UDP ||
+ item->type == RTE_FLOW_ITEM_TYPE_TCP ||
+ item->type == RTE_FLOW_ITEM_TYPE_SCTP ||
+ item->type == RTE_FLOW_ITEM_TYPE_VXLAN ||
+ item->type == RTE_FLOW_ITEM_TYPE_NVGRE)
+ item_num++;
+ }
+
+ list = rte_zmalloc(NULL, item_num * sizeof(*list), 0);
+ if (!list) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, actions,
+ "no memory malloc");
+ goto out;
+ }
+ *lkup_list = list;
+
+ for (item = pattern, i = 0; item->type !=
+ RTE_FLOW_ITEM_TYPE_END; item++, i++) {
+ item_type = item->type;
+
+ switch (item_type) {
+ case RTE_FLOW_ITEM_TYPE_ETH:
+ eth_spec = item->spec;
+ eth_mask = item->mask;
+ if (eth_spec && eth_mask) {
+ list[t].type = (tun_type == ICE_NON_TUN) ?
+ ICE_MAC_OFOS : ICE_MAC_IL;
+ for (j = 0; j < RTE_ETHER_ADDR_LEN; j++) {
+ if (eth_mask->src.addr_bytes[j] ==
+ UINT8_MAX) {
+ list[t].h_u.eth_hdr.
+ src_addr[j] =
+ eth_spec->src.addr_bytes[j];
+ list[t].m_u.eth_hdr.
+ src_addr[j] =
+ eth_mask->src.addr_bytes[j];
+ }
+ if (eth_mask->dst.addr_bytes[j] ==
+ UINT8_MAX) {
+ list[t].h_u.eth_hdr.
+ dst_addr[j] =
+ eth_spec->dst.addr_bytes[j];
+ list[t].m_u.eth_hdr.
+ dst_addr[j] =
+ eth_mask->dst.addr_bytes[j];
+ }
+ }
+ if (eth_mask->type == UINT16_MAX) {
+ list[t].h_u.eth_hdr.ethtype_id =
+ rte_be_to_cpu_16(eth_spec->type);
+ list[t].m_u.eth_hdr.ethtype_id =
+ UINT16_MAX;
+ }
+ t++;
+ } else if (!eth_spec && !eth_mask) {
+ list[t].type = (tun_type == ICE_NON_TUN) ?
+ ICE_MAC_OFOS : ICE_MAC_IL;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_IPV4:
+ ipv4_spec = item->spec;
+ ipv4_mask = item->mask;
+ if (ipv4_spec && ipv4_mask) {
+ list[t].type = (tun_type == ICE_NON_TUN) ?
+ ICE_IPV4_OFOS : ICE_IPV4_IL;
+ if (ipv4_mask->hdr.src_addr == UINT32_MAX) {
+ list[t].h_u.ipv4_hdr.src_addr =
+ ipv4_spec->hdr.src_addr;
+ list[t].m_u.ipv4_hdr.src_addr =
+ UINT32_MAX;
+ }
+ if (ipv4_mask->hdr.dst_addr == UINT32_MAX) {
+ list[t].h_u.ipv4_hdr.dst_addr =
+ ipv4_spec->hdr.dst_addr;
+ list[t].m_u.ipv4_hdr.dst_addr =
+ UINT32_MAX;
+ }
+ if (ipv4_mask->hdr.time_to_live == UINT8_MAX) {
+ list[t].h_u.ipv4_hdr.time_to_live =
+ ipv4_spec->hdr.time_to_live;
+ list[t].m_u.ipv4_hdr.time_to_live =
+ UINT8_MAX;
+ }
+ if (ipv4_mask->hdr.next_proto_id == UINT8_MAX) {
+ list[t].h_u.ipv4_hdr.protocol =
+ ipv4_spec->hdr.next_proto_id;
+ list[t].m_u.ipv4_hdr.protocol =
+ UINT8_MAX;
+ }
+ if (ipv4_mask->hdr.type_of_service ==
+ UINT8_MAX) {
+ list[t].h_u.ipv4_hdr.tos =
+ ipv4_spec->hdr.type_of_service;
+ list[t].m_u.ipv4_hdr.tos = UINT8_MAX;
+ }
+ t++;
+ } else if (!ipv4_spec && !ipv4_mask) {
+ list[t].type = (tun_type == ICE_NON_TUN) ?
+ ICE_IPV4_OFOS : ICE_IPV4_IL;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_IPV6:
+ ipv6_spec = item->spec;
+ ipv6_mask = item->mask;
+ if (ipv6_spec && ipv6_mask) {
+ list[t].type = (tun_type == ICE_NON_TUN) ?
+ ICE_IPV6_OFOS : ICE_IPV6_IL;
+ for (j = 0; j < ICE_IPV6_ADDR_LENGTH; j++) {
+ if (ipv6_mask->hdr.src_addr[j] ==
+ UINT8_MAX) {
+ list[t].h_u.ice_ipv6_ofos_hdr.
+ src_addr[j] =
+ ipv6_spec->hdr.src_addr[j];
+ list[t].m_u.ice_ipv6_ofos_hdr.
+ src_addr[j] =
+ ipv6_mask->hdr.src_addr[j];
+ }
+ if (ipv6_mask->hdr.dst_addr[j] ==
+ UINT8_MAX) {
+ list[t].h_u.ice_ipv6_ofos_hdr.
+ dst_addr[j] =
+ ipv6_spec->hdr.dst_addr[j];
+ list[t].m_u.ice_ipv6_ofos_hdr.
+ dst_addr[j] =
+ ipv6_mask->hdr.dst_addr[j];
+ }
+ }
+ if (ipv6_mask->hdr.proto == UINT8_MAX) {
+ list[t].h_u.ice_ipv6_ofos_hdr.next_hdr =
+ ipv6_spec->hdr.proto;
+ list[t].m_u.ice_ipv6_ofos_hdr.next_hdr =
+ UINT8_MAX;
+ }
+ if (ipv6_mask->hdr.hop_limits == UINT8_MAX) {
+ list[t].h_u.ice_ipv6_ofos_hdr.
+ hop_limit = ipv6_spec->hdr.hop_limits;
+ list[t].m_u.ice_ipv6_ofos_hdr.
+ hop_limit = UINT8_MAX;
+ }
+ t++;
+ } else if (!ipv6_spec && !ipv6_mask) {
+ list[t].type = (tun_type == ICE_NON_TUN) ?
+ ICE_IPV4_OFOS : ICE_IPV4_IL;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_UDP:
+ udp_spec = item->spec;
+ udp_mask = item->mask;
+ if (udp_spec && udp_mask) {
+ list[t].type = ICE_UDP_ILOS;
+ if (udp_mask->hdr.src_port == UINT16_MAX) {
+ list[t].h_u.l4_hdr.src_port =
+ udp_spec->hdr.src_port;
+ list[t].m_u.l4_hdr.src_port =
+ udp_mask->hdr.src_port;
+ }
+ if (udp_mask->hdr.dst_port == UINT16_MAX) {
+ list[t].h_u.l4_hdr.dst_port =
+ udp_spec->hdr.dst_port;
+ list[t].m_u.l4_hdr.dst_port =
+ udp_mask->hdr.dst_port;
+ }
+ t++;
+ } else if (!udp_spec && !udp_mask) {
+ list[t].type = ICE_UDP_ILOS;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_TCP:
+ tcp_spec = item->spec;
+ tcp_mask = item->mask;
+ if (tcp_spec && tcp_mask) {
+ list[t].type = ICE_TCP_IL;
+ if (tcp_mask->hdr.src_port == UINT16_MAX) {
+ list[t].h_u.l4_hdr.src_port =
+ tcp_spec->hdr.src_port;
+ list[t].m_u.l4_hdr.src_port =
+ tcp_mask->hdr.src_port;
+ }
+ if (tcp_mask->hdr.dst_port == UINT16_MAX) {
+ list[t].h_u.l4_hdr.dst_port =
+ tcp_spec->hdr.dst_port;
+ list[t].m_u.l4_hdr.dst_port =
+ tcp_mask->hdr.dst_port;
+ }
+ t++;
+ } else if (!tcp_spec && !tcp_mask) {
+ list[t].type = ICE_TCP_IL;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_SCTP:
+ sctp_spec = item->spec;
+ sctp_mask = item->mask;
+ if (sctp_spec && sctp_mask) {
+ list[t].type = ICE_SCTP_IL;
+ if (sctp_mask->hdr.src_port == UINT16_MAX) {
+ list[t].h_u.sctp_hdr.src_port =
+ sctp_spec->hdr.src_port;
+ list[t].m_u.sctp_hdr.src_port =
+ sctp_mask->hdr.src_port;
+ }
+ if (sctp_mask->hdr.dst_port == UINT16_MAX) {
+ list[t].h_u.sctp_hdr.dst_port =
+ sctp_spec->hdr.dst_port;
+ list[t].m_u.sctp_hdr.dst_port =
+ sctp_mask->hdr.dst_port;
+ }
+ t++;
+ } else if (!sctp_spec && !sctp_mask) {
+ list[t].type = ICE_SCTP_IL;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_VXLAN:
+ vxlan_spec = item->spec;
+ vxlan_mask = item->mask;
+ tun_type = ICE_SW_TUN_VXLAN;
+ if (vxlan_spec && vxlan_mask) {
+ list[t].type = ICE_VXLAN;
+ if (vxlan_mask->vni[0] == UINT8_MAX &&
+ vxlan_mask->vni[1] == UINT8_MAX &&
+ vxlan_mask->vni[2] == UINT8_MAX) {
+ list[t].h_u.tnl_hdr.vni =
+ (vxlan_spec->vni[1] << 8) |
+ vxlan_spec->vni[0];
+ list[t].m_u.tnl_hdr.vni =
+ UINT16_MAX;
+ }
+ t++;
+ } else if (!vxlan_spec && !vxlan_mask) {
+ list[t].type = ICE_VXLAN;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_NVGRE:
+ nvgre_spec = item->spec;
+ nvgre_mask = item->mask;
+ tun_type = ICE_SW_TUN_NVGRE;
+ if (nvgre_spec && nvgre_mask) {
+ list[t].type = ICE_NVGRE;
+ if (nvgre_mask->tni[0] == UINT8_MAX &&
+ nvgre_mask->tni[1] == UINT8_MAX &&
+ nvgre_mask->tni[2] == UINT8_MAX) {
+ list[t].h_u.nvgre_hdr.tni =
+ (nvgre_spec->tni[1] << 8) |
+ nvgre_spec->tni[0];
+ list[t].m_u.nvgre_hdr.tni =
+ UINT16_MAX;
+ }
+ t++;
+ } else if (!nvgre_spec && !nvgre_mask) {
+ list[t].type = ICE_NVGRE;
+ }
+ break;
+
+ case RTE_FLOW_ITEM_TYPE_VOID:
+ case RTE_FLOW_ITEM_TYPE_END:
+ break;
+
+ default:
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, actions,
+ "Invalid pattern item.");
+ goto out;
+ }
+ }
+
+ rule_info->tun_type = tun_type;
+ *lkups_num = t;
+
+ return 0;
+out:
+ return -rte_errno;
+}
+
+/* By now ice switch filter action code implement only
+* supports QUEUE or DROP.
+*/
+static int
+ice_parse_switch_action(struct ice_pf *pf,
+ const struct rte_flow_action *actions,
+ struct rte_flow_error *error,
+ struct ice_adv_rule_info *rule_info)
+{
+ struct ice_hw *hw = ICE_PF_TO_HW(pf);
+ struct ice_vsi *vsi = pf->main_vsi;
+ const struct rte_flow_action *act;
+ const struct rte_flow_action_queue *act_q;
+ uint16_t base_queue, index = 0;
+ uint32_t reg;
+
+ /* Check if the first non-void action is QUEUE or DROP. */
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_QUEUE &&
+ act->type != RTE_FLOW_ACTION_TYPE_DROP) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ act, "Not supported action.");
+ return -rte_errno;
+ }
+ reg = ICE_READ_REG(hw, PFLAN_RX_QALLOC);
+ if (reg & PFLAN_RX_QALLOC_VALID_M) {
+ base_queue = reg & PFLAN_RX_QALLOC_FIRSTQ_M;
+ } else {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ act, "Invalid queue register");
+ return -rte_errno;
+ }
+ if (act->type == RTE_FLOW_ACTION_TYPE_QUEUE) {
+ act_q = act->conf;
+ rule_info->sw_act.fltr_act = ICE_FWD_TO_Q;
+ rule_info->sw_act.fwd_id.q_id = base_queue + act_q->index;
+ if (act_q->index >= pf->dev_data->nb_rx_queues) {
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION,
+ act, "Invalid queue ID for"
+ " switch filter.");
+ return -rte_errno;
+ }
+ } else {
+ rule_info->sw_act.fltr_act = ICE_DROP_PACKET;
+ }
+
+ rule_info->sw_act.vsi_handle = vsi->idx;
+ rule_info->rx = 1;
+ rule_info->sw_act.src = vsi->idx;
+
+ /* Check if the next non-void item is END */
+ index++;
+ NEXT_ITEM_OF_ACTION(act, actions, index);
+ if (act->type != RTE_FLOW_ACTION_TYPE_END) {
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ act, "Not supported action.");
+ return -rte_errno;
+ }
+
+ return 0;
+}
+
+static int
+ice_switch_rule_set(struct ice_pf *pf,
+ struct ice_adv_lkup_elem *list,
+ uint16_t lkups_cnt,
+ struct ice_adv_rule_info *rule_info,
+ struct rte_flow *flow)
+{
+ struct ice_hw *hw = ICE_PF_TO_HW(pf);
+ int ret;
+ struct ice_rule_query_data rule_added = {0};
+ struct ice_rule_query_data *filter_ptr;
+
+ if (lkups_cnt > ICE_MAX_CHAIN_WORDS) {
+ PMD_DRV_LOG(ERR, "item number too large for rule");
+ return -ENOTSUP;
+ }
+ if (!list) {
+ PMD_DRV_LOG(ERR, "lookup list should not be NULL");
+ return -ENOTSUP;
+ }
+
+ ret = ice_add_adv_rule(hw, list, lkups_cnt, rule_info, &rule_added);
+
+ if (!ret) {
+ filter_ptr = rte_zmalloc("ice_switch_filter",
+ sizeof(struct ice_rule_query_data), 0);
+ if (!filter_ptr) {
+ PMD_DRV_LOG(ERR, "failed to allocate memory");
+ return -EINVAL;
+ }
+ flow->rule = filter_ptr;
+ rte_memcpy(filter_ptr,
+ &rule_added,
+ sizeof(struct ice_rule_query_data));
+ }
+
+ return ret;
+}
+
+int
+ice_create_switch_filter(struct ice_pf *pf,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error)
+{
+ int ret = 0;
+ struct ice_adv_rule_info rule_info = {0};
+ struct ice_adv_lkup_elem *list = NULL;
+ uint16_t lkups_num = 0;
+
+ ret = ice_parse_switch_filter(pattern, actions, error,
+ &rule_info, &list, &lkups_num);
+ if (ret)
+ goto out;
+
+ ret = ice_parse_switch_action(pf, actions, error, &rule_info);
+ if (ret)
+ goto out;
+
+ ret = ice_switch_rule_set(pf, list, lkups_num, &rule_info, flow);
+ if (ret)
+ goto out;
+
+ rte_free(list);
+ return 0;
+
+out:
+ rte_free(list);
+
+ return -rte_errno;
+}
+
+int
+ice_destroy_switch_filter(struct ice_pf *pf,
+ struct rte_flow *flow)
+{
+ struct ice_hw *hw = ICE_PF_TO_HW(pf);
+ int ret;
+ struct ice_rule_query_data *filter_ptr;
+ struct ice_rule_query_data rule_added;
+
+ filter_ptr = (struct ice_rule_query_data *)
+ flow->rule;
+ rte_memcpy(&rule_added, filter_ptr,
+ sizeof(struct ice_rule_query_data));
+
+ if (!filter_ptr) {
+ PMD_DRV_LOG(ERR, "no such flow"
+ " create by switch filter");
+ return -EINVAL;
+ }
+
+ ret = ice_rem_adv_rule_by_id(hw, &rule_added);
+
+ rte_free(filter_ptr);
+
+ return ret;
+}
+
+void
+ice_free_switch_filter_rule(void *rule)
+{
+ struct ice_rule_query_data *filter_ptr;
+
+ filter_ptr = (struct ice_rule_query_data *)rule;
+
+ rte_free(filter_ptr);
+}
new file mode 100644
@@ -0,0 +1,28 @@
+#ifndef _ICE_SWITCH_FILTER_H_
+#define _ICE_SWITCH_FILTER_H_
+
+#include "base/ice_switch.h"
+#include "base/ice_type.h"
+#include "ice_ethdev.h"
+
+#define NEXT_ITEM_OF_ACTION(act, actions, index) \
+ do { \
+ act = actions + index; \
+ while (act->type == RTE_FLOW_ACTION_TYPE_VOID) { \
+ index++; \
+ act = actions + index; \
+ } \
+ } while (0)
+
+int
+ice_create_switch_filter(struct ice_pf *pf,
+ const struct rte_flow_item pattern[],
+ const struct rte_flow_action actions[],
+ struct rte_flow *flow,
+ struct rte_flow_error *error);
+int
+ice_destroy_switch_filter(struct ice_pf *pf,
+ struct rte_flow *flow);
+void
+ice_free_switch_filter_rule(void *rule);
+#endif /* _ICE_SWITCH_FILTER_H_ */
@@ -6,7 +6,8 @@ objs = [base_objs]
sources = files(
'ice_ethdev.c',
- 'ice_rxtx.c'
+ 'ice_rxtx.c',
+ 'ice_switch_filter.c'
)
deps += ['hash']