diff mbox

[dpdk-dev] igb: support setting link up or down

Message ID 1467042385-3592-1-git-send-email-aaron@arbor.net (mailing list archive)
State Accepted, archived
Delegated to: Bruce Richardson
Headers

Commit Message

Aaron Campbell June 27, 2016, 3:46 p.m. UTC 
  Add driver functions to set link state up or down.

Signed-off-by: Aaron Campbell <aaron@arbor.net>
---
 drivers/net/e1000/igb_ethdev.c | 37 ++++++++++++++++++++++++++++++++-----
 1 file changed, 32 insertions(+), 5 deletions(-)

Comments

Wenzhuo Lu June 28, 2016, 1:10 a.m. UTC | #1 
Hi,

> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Aaron Campbell
> Sent: Monday, June 27, 2016 11:46 PM
> To: dev@dpdk.org
> Cc: Aaron Campbell
> Subject: [dpdk-dev] [PATCH] igb: support setting link up or down
> 
> Add driver functions to set link state up or down.
> 
> Signed-off-by: Aaron Campbell <aaron@arbor.net>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Bruce Richardson June 29, 2016, 10:31 a.m. UTC | #2 
On Tue, Jun 28, 2016 at 01:10:58AM +0000, Lu, Wenzhuo wrote:
> Hi,
> 
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Aaron Campbell
> > Sent: Monday, June 27, 2016 11:46 PM
> > To: dev@dpdk.org
> > Cc: Aaron Campbell
> > Subject: [dpdk-dev] [PATCH] igb: support setting link up or down
> > 
> > Add driver functions to set link state up or down.
> > 
> > Signed-off-by: Aaron Campbell <aaron@arbor.net>
> Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
> 
Applied to dpdk-next-net/rel_16_07

/Bruce
diff mbox

Patch

diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index b822992..f8df691 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -89,6 +89,8 @@ 
 static int  eth_igb_configure(struct rte_eth_dev *dev);
 static int  eth_igb_start(struct rte_eth_dev *dev);
 static void eth_igb_stop(struct rte_eth_dev *dev);
+static int  eth_igb_dev_set_link_up(struct rte_eth_dev *dev);
+static int  eth_igb_dev_set_link_down(struct rte_eth_dev *dev);
 static void eth_igb_close(struct rte_eth_dev *dev);
 static void eth_igb_promiscuous_enable(struct rte_eth_dev *dev);
 static void eth_igb_promiscuous_disable(struct rte_eth_dev *dev);
@@ -322,6 +324,8 @@  static const struct eth_dev_ops eth_igb_ops = {
 	.dev_configure        = eth_igb_configure,
 	.dev_start            = eth_igb_start,
 	.dev_stop             = eth_igb_stop,
+	.dev_set_link_up      = eth_igb_dev_set_link_up,
+	.dev_set_link_down    = eth_igb_dev_set_link_down,
 	.dev_close            = eth_igb_close,
 	.promiscuous_enable   = eth_igb_promiscuous_enable,
 	.promiscuous_disable  = eth_igb_promiscuous_disable,
@@ -1151,7 +1155,7 @@  eth_igb_start(struct rte_eth_dev *dev)
 	rte_intr_disable(intr_handle);
 
 	/* Power up the phy. Needed to make the link go Up */
-	e1000_power_up_phy(hw);
+	eth_igb_dev_set_link_up(dev);
 
 	/*
 	 * Packet Buffer Allocation (PBA)
@@ -1357,10 +1361,7 @@  eth_igb_stop(struct rte_eth_dev *dev)
 	}
 
 	/* Power down the phy. Needed to make the link go Down */
-	if (hw->phy.media_type == e1000_media_type_copper)
-		e1000_power_down_phy(hw);
-	else
-		e1000_shutdown_fiber_serdes_link(hw);
+	eth_igb_dev_set_link_down(dev);
 
 	igb_dev_clear_queues(dev);
 
@@ -1407,6 +1408,32 @@  eth_igb_stop(struct rte_eth_dev *dev)
 	}
 }
 
+static int
+eth_igb_dev_set_link_up(struct rte_eth_dev *dev)
+{
+	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	if (hw->phy.media_type == e1000_media_type_copper)
+		e1000_power_up_phy(hw);
+	else
+		e1000_power_up_fiber_serdes_link(hw);
+
+	return 0;
+}
+
+static int
+eth_igb_dev_set_link_down(struct rte_eth_dev *dev)
+{
+	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	if (hw->phy.media_type == e1000_media_type_copper)
+		e1000_power_down_phy(hw);
+	else
+		e1000_shutdown_fiber_serdes_link(hw);
+
+	return 0;
+}
+
 static void
 eth_igb_close(struct rte_eth_dev *dev)
 {