[RFC] kni: remove ethtool support

Message ID 20181218012539.52921-1-ferruh.yigit@intel.com
State Superseded
Delegated to: Thomas Monjalon
Headers show
Series
  • [RFC] kni: remove ethtool support
Related show

Checks

Context Check Description
ci/Intel-compilation success Compilation OK
ci/checkpatch success coding style OK

Commit Message

Ferruh Yigit Dec. 18, 2018, 1:25 a.m.
Current design requires kernel drivers and they need to be probed by
Linux up to some level so that they can be usable by DPDK for ethtool
support, this requires maintaining the Linux drivers in DPDK.

Also ethtool support is limited and hard, if not impossible, to expand
to other PMDs.

Since KNI ethtool support is not used commonly, if not used at all,
removing the support for the sake of simplicity and maintenance.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
---
 config/common_base                            |     1 -
 .../sample_app_ug/kernel_nic_interface.rst    |    10 -
 examples/kni/main.c                           |     9 -
 kernel/linux/kni/Kbuild                       |     4 +-
 kernel/linux/kni/Makefile                     |    26 +-
 kernel/linux/kni/ethtool/README               |    71 -
 kernel/linux/kni/ethtool/igb/e1000_82575.c    |  3650 ------
 kernel/linux/kni/ethtool/igb/e1000_82575.h    |   494 -
 kernel/linux/kni/ethtool/igb/e1000_api.c      |  1144 --
 kernel/linux/kni/ethtool/igb/e1000_api.h      |   142 -
 kernel/linux/kni/ethtool/igb/e1000_defines.h  |  1365 --
 kernel/linux/kni/ethtool/igb/e1000_hw.h       |   778 --
 kernel/linux/kni/ethtool/igb/e1000_i210.c     |   894 --
 kernel/linux/kni/ethtool/igb/e1000_i210.h     |    76 -
 kernel/linux/kni/ethtool/igb/e1000_mac.c      |  2081 ----
 kernel/linux/kni/ethtool/igb/e1000_mac.h      |    65 -
 kernel/linux/kni/ethtool/igb/e1000_manage.c   |   539 -
 kernel/linux/kni/ethtool/igb/e1000_manage.h   |    74 -
 kernel/linux/kni/ethtool/igb/e1000_mbx.c      |   510 -
 kernel/linux/kni/ethtool/igb/e1000_mbx.h      |    72 -
 kernel/linux/kni/ethtool/igb/e1000_nvm.c      |   950 --
 kernel/linux/kni/ethtool/igb/e1000_nvm.h      |    60 -
 kernel/linux/kni/ethtool/igb/e1000_osdep.h    |   121 -
 kernel/linux/kni/ethtool/igb/e1000_phy.c      |  3392 -----
 kernel/linux/kni/ethtool/igb/e1000_phy.h      |   241 -
 kernel/linux/kni/ethtool/igb/e1000_regs.h     |   631 -
 kernel/linux/kni/ethtool/igb/igb.h            |   844 --
 kernel/linux/kni/ethtool/igb/igb_ethtool.c    |  2851 -----
 kernel/linux/kni/ethtool/igb/igb_main.c       | 10344 ----------------
 kernel/linux/kni/ethtool/igb/igb_param.c      |   832 --
 kernel/linux/kni/ethtool/igb/igb_regtest.h    |   234 -
 kernel/linux/kni/ethtool/igb/igb_vmdq.c       |   421 -
 kernel/linux/kni/ethtool/igb/igb_vmdq.h       |    31 -
 kernel/linux/kni/ethtool/igb/kcompat.h        |  3945 ------
 kernel/linux/kni/ethtool/igb/meson.build      |    16 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe.h        |   912 --
 kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c  |  1281 --
 kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h  |    29 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c  |  2299 ----
 kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h  |    43 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c    |  1142 --
 kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h    |   153 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c |  4067 ------
 kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h |   125 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h    |   153 -
 .../linux/kni/ethtool/ixgbe/ixgbe_ethtool.c   |  2894 -----
 kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h   |    76 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c   |  2951 -----
 kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h    |    90 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h  |   117 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c    |  1832 ---
 kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h    |   122 -
 kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h   |  3239 -----
 kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c   |   922 --
 kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h   |    43 -
 kernel/linux/kni/ethtool/ixgbe/kcompat.c      |  1231 --
 kernel/linux/kni/ethtool/ixgbe/kcompat.h      |  3140 -----
 kernel/linux/kni/ethtool/ixgbe/meson.build    |    13 -
 kernel/linux/kni/ethtool/meson.build          |     5 -
 kernel/linux/kni/kni_dev.h                    |     8 -
 kernel/linux/kni/kni_ethtool.c                |   229 -
 kernel/linux/kni/kni_misc.c                   |    82 +-
 kernel/linux/kni/meson.build                  |     9 +-
 lib/librte_kni/rte_kni.c                      |     5 -
 lib/librte_kni/rte_kni.h                      |     4 +-
 65 files changed, 15 insertions(+), 64119 deletions(-)
 delete mode 100644 kernel/linux/kni/ethtool/README
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_82575.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_82575.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_api.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_api.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_defines.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_hw.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_i210.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_i210.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mac.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mac.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_manage.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_manage.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mbx.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_mbx.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_nvm.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_nvm.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_osdep.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_phy.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_phy.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/e1000_regs.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb_ethtool.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb_main.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb_param.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb_regtest.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb_vmdq.c
 delete mode 100644 kernel/linux/kni/ethtool/igb/igb_vmdq.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/kcompat.h
 delete mode 100644 kernel/linux/kni/ethtool/igb/meson.build
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/kcompat.c
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/kcompat.h
 delete mode 100644 kernel/linux/kni/ethtool/ixgbe/meson.build
 delete mode 100644 kernel/linux/kni/ethtool/meson.build
 delete mode 100644 kernel/linux/kni/kni_ethtool.c

Comments

Igor Ryzhov Dec. 18, 2018, 8:20 a.m. | #1
Hi Ferruh,

Please, look at my patch http://patches.dpdk.org/patch/48454/ and consider
rebasing your patch over mine.

As we discussed with Stephen, KNI needs to supply ethtool_ops with
.get_link function, to properly support link status.
So we should save ethtool_ops and implement .get_link using standard
ethtool_op_get_link.

Best regards,
Igor

On Tue, Dec 18, 2018 at 4:28 AM Ferruh Yigit <ferruh.yigit@intel.com> wrote:

> Current design requires kernel drivers and they need to be probed by Linux
> up to some level so that they can be usable by DPDK for ethtool support,
> this requires maintaining the Linux drivers in DPDK. Also ethtool support
> is limited and hard, if not impossible, to expand to other PMDs. Since KNI
> ethtool support is not used commonly, if not used at all, removing the
> support for the sake of simplicity and maintenance. Signed-off-by: Ferruh
> Yigit --- config/common_base | 1 -
> .../sample_app_ug/kernel_nic_interface.rst | 10 - examples/kni/main.c | 9 -
> kernel/linux/kni/Kbuild | 4 +- kernel/linux/kni/Makefile | 26 +-
> kernel/linux/kni/ethtool/README | 71 -
> kernel/linux/kni/ethtool/igb/e1000_82575.c | 3650 ------
> kernel/linux/kni/ethtool/igb/e1000_82575.h | 494 -
> kernel/linux/kni/ethtool/igb/e1000_api.c | 1144 --
> kernel/linux/kni/ethtool/igb/e1000_api.h | 142 -
> kernel/linux/kni/ethtool/igb/e1000_defines.h | 1365 --
> kernel/linux/kni/ethtool/igb/e1000_hw.h | 778 --
> kernel/linux/kni/ethtool/igb/e1000_i210.c | 894 --
> kernel/linux/kni/ethtool/igb/e1000_i210.h | 76 -
> kernel/linux/kni/ethtool/igb/e1000_mac.c | 2081 ----
> kernel/linux/kni/ethtool/igb/e1000_mac.h | 65 -
> kernel/linux/kni/ethtool/igb/e1000_manage.c | 539 -
> kernel/linux/kni/ethtool/igb/e1000_manage.h | 74 -
> kernel/linux/kni/ethtool/igb/e1000_mbx.c | 510 -
> kernel/linux/kni/ethtool/igb/e1000_mbx.h | 72 -
> kernel/linux/kni/ethtool/igb/e1000_nvm.c | 950 --
> kernel/linux/kni/ethtool/igb/e1000_nvm.h | 60 -
> kernel/linux/kni/ethtool/igb/e1000_osdep.h | 121 -
> kernel/linux/kni/ethtool/igb/e1000_phy.c | 3392 -----
> kernel/linux/kni/ethtool/igb/e1000_phy.h | 241 -
> kernel/linux/kni/ethtool/igb/e1000_regs.h | 631 -
> kernel/linux/kni/ethtool/igb/igb.h | 844 --
> kernel/linux/kni/ethtool/igb/igb_ethtool.c | 2851 -----
> kernel/linux/kni/ethtool/igb/igb_main.c | 10344 ----------------
> kernel/linux/kni/ethtool/igb/igb_param.c | 832 --
> kernel/linux/kni/ethtool/igb/igb_regtest.h | 234 -
> kernel/linux/kni/ethtool/igb/igb_vmdq.c | 421 -
> kernel/linux/kni/ethtool/igb/igb_vmdq.h | 31 -
> kernel/linux/kni/ethtool/igb/kcompat.h | 3945 ------
> kernel/linux/kni/ethtool/igb/meson.build | 16 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe.h | 912 --
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c | 1281 --
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h | 29 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c | 2299 ----
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h | 43 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c | 1142 --
> kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h | 153 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c | 4067 ------
> kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h | 125 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h | 153 -
> .../linux/kni/ethtool/ixgbe/ixgbe_ethtool.c | 2894 -----
> kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h | 76 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c | 2951 -----
> kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h | 90 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h | 117 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c | 1832 ---
> kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h | 122 -
> kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h | 3239 -----
> kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c | 922 --
> kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h | 43 -
> kernel/linux/kni/ethtool/ixgbe/kcompat.c | 1231 --
> kernel/linux/kni/ethtool/ixgbe/kcompat.h | 3140 -----
> kernel/linux/kni/ethtool/ixgbe/meson.build | 13 -
> kernel/linux/kni/ethtool/meson.build | 5 - kernel/linux/kni/kni_dev.h | 8 -
> kernel/linux/kni/kni_ethtool.c | 229 - kernel/linux/kni/kni_misc.c | 82 +-
> kernel/linux/kni/meson.build | 9 +- lib/librte_kni/rte_kni.c | 5 -
> lib/librte_kni/rte_kni.h | 4 +- 65 files changed, 15 insertions(+), 64119
> deletions(-) delete mode 100644 kernel/linux/kni/ethtool/README delete mode
> 100644 kernel/linux/kni/ethtool/igb/e1000_82575.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_82575.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_api.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_api.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_defines.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_hw.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_i210.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_i210.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_mac.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_mac.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_manage.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_manage.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_mbx.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_mbx.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_nvm.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_nvm.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_osdep.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_phy.c delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_phy.h delete mode 100644
> kernel/linux/kni/ethtool/igb/e1000_regs.h delete mode 100644
> kernel/linux/kni/ethtool/igb/igb.h delete mode 100644
> kernel/linux/kni/ethtool/igb/igb_ethtool.c delete mode 100644
> kernel/linux/kni/ethtool/igb/igb_main.c delete mode 100644
> kernel/linux/kni/ethtool/igb/igb_param.c delete mode 100644
> kernel/linux/kni/ethtool/igb/igb_regtest.h delete mode 100644
> kernel/linux/kni/ethtool/igb/igb_vmdq.c delete mode 100644
> kernel/linux/kni/ethtool/igb/igb_vmdq.h delete mode 100644
> kernel/linux/kni/ethtool/igb/kcompat.h delete mode 100644
> kernel/linux/kni/ethtool/igb/meson.build delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/kcompat.c delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/kcompat.h delete mode 100644
> kernel/linux/kni/ethtool/ixgbe/meson.build delete mode 100644
> kernel/linux/kni/ethtool/meson.build delete mode 100644
> kernel/linux/kni/kni_ethtool.c diff --git a/config/common_base
> b/config/common_base index d12ae98bc..8c1a330e0 100644 ---
> a/config/common_base +++ b/config/common_base @@ -890,7 +890,6 @@
> CONFIG_RTE_PIPELINE_STATS_COLLECT=n CONFIG_RTE_LIBRTE_KNI=n
> CONFIG_RTE_LIBRTE_PMD_KNI=n CONFIG_RTE_KNI_KMOD=n
> -CONFIG_RTE_KNI_KMOD_ETHTOOL=n CONFIG_RTE_KNI_PREEMPT_DEFAULT=y # diff
> --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst
> b/doc/guides/sample_app_ug/kernel_nic_interface.rst index
> 6acdf0fff..2d07ff241 100644 ---
> a/doc/guides/sample_app_ug/kernel_nic_interface.rst +++
> b/doc/guides/sample_app_ug/kernel_nic_interface.rst @@ -262,16 +262,6 @@
> Change the MTU size: # ifconfig vEth0_0 mtu 1450 -If DPDK is compiled with
> ``CONFIG_RTE_KNI_KMOD_ETHTOOL=y`` and an Intel -NIC is used, the user can
> use ``ethtool`` on the KNI interface as if it -were a normal Linux kernel
> interface. - -Displaying the NIC registers: - -.. code-block:: console - -
> # ethtool -d vEth0_0 - When the ``kni`` application is closed, all the KNI
> interfaces are deleted from the Linux kernel. diff --git
> a/examples/kni/main.c b/examples/kni/main.c index e37b1ad36..c468ffd19
> 100644 --- a/examples/kni/main.c +++ b/examples/kni/main.c @@ -885,19
> +885,10 @@ kni_alloc(uint16_t port_id) if (i == 0) { struct rte_kni_ops
> ops; struct rte_eth_dev_info dev_info; - const struct rte_pci_device
> *pci_dev; - const struct rte_bus *bus = NULL; memset(&dev_info, 0,
> sizeof(dev_info)); rte_eth_dev_info_get(port_id, &dev_info); - if
> (dev_info.device) - bus = rte_bus_find_by_device(dev_info.device); - if
> (bus && !strcmp(bus->name, "pci")) { - pci_dev =
> RTE_DEV_TO_PCI(dev_info.device); - conf.addr = pci_dev->addr; - conf.id =
> pci_dev->id; - } /* Get the interface default mac address */
> rte_eth_macaddr_get(port_id, (struct ether_addr *)&conf.mac_addr); diff
> --git a/kernel/linux/kni/Kbuild b/kernel/linux/kni/Kbuild index
> de5c27f32..e5452d6c0 100644 --- a/kernel/linux/kni/Kbuild +++
> b/kernel/linux/kni/Kbuild @@ -3,6 +3,4 @@ ccflags-y := $(MODULE_CFLAGS)
> obj-m := rte_kni.o -rte_kni-y := $(patsubst $(src)/%.c,%.o,$(wildcard
> $(src)/*.c)) \ - $(patsubst $(src)/%.c,%.o,$(wildcard
> $(src)/ethtool/ixgbe/*.c)) \ - $(patsubst $(src)/%.c,%.o,$(wildcard
> $(src)/ethtool/igb/*.c)) +rte_kni-y := $(patsubst $(src)/%.c,%.o,$(wildcard
> $(src)/*.c)) diff --git a/kernel/linux/kni/Makefile
> b/kernel/linux/kni/Makefile index 282be7b68..595bac261 100644 ---
> a/kernel/linux/kni/Makefile +++ b/kernel/linux/kni/Makefile @@ -12,7 +12,7
> @@ MODULE = rte_kni # CFLAGS # MODULE_CFLAGS += -I$(SRCDIR) --param
> max-inline-insns-single=50 -MODULE_CFLAGS += -I$(RTE_OUTPUT)/include
> -I$(SRCDIR)/ethtool/ixgbe -I$(SRCDIR)/ethtool/igb +MODULE_CFLAGS +=
> -I$(RTE_OUTPUT)/include MODULE_CFLAGS += -include
> $(RTE_OUTPUT)/include/rte_config.h MODULE_CFLAGS += -Wall -Werror @@ -30,29
> +30,5 @@ endif # SRCS-y := kni_misc.c SRCS-y += kni_net.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += kni_ethtool.c -
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_main.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_api.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_common.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_ethtool.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82599.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82598.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_x540.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_phy.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/kcompat.c -
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_82575.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_i210.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_api.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mac.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_manage.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mbx.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_nvm.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_phy.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_ethtool.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_main.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_param.c
> -SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_vmdq.c include
> $(RTE_SDK)/mk/rte.module.mk diff --git a/kernel/linux/kni/ethtool/README
> b/kernel/linux/kni/ethtool/README deleted file mode 100644 index
> af36738ad..000000000 --- a/kernel/linux/kni/ethtool/README +++ /dev/null @@
> -1,71 +0,0 @@ -.. SPDX-License-Identifier: BSD-3-Clause - Copyright(c)
> 2010-2014 Intel Corporation. - -Description - -In order to support ethtool
> in Kernel NIC Interface, the standard Linux kernel -drivers of ixgbe/igb
> are needed to be reused here. ixgbe-3.9.17 is the version -modified from in
> kernel NIC interface kernel module to support ixgbe NIC, and -igb-3.4.8 is
> the version modified from in kernel NIC interface kernel module to -support
> igb NIC. - -The source code package of ixgbe can be downloaded from
> sourceforge.net as below. -http://sourceforge.net/projects/e1000/files/ixgbe%20stable/
> -Below <http://sourceforge.net/projects/e1000/files/ixgbe%20stable/-Below>
> source files are copied or modified from ixgbe. - -ixgbe_82598.h
> -ixgbe_82599.c -ixgbe_82599.h -ixgbe_api.c -ixgbe_api.h -ixgbe_common.c
> -ixgbe_common.h -ixgbe_dcb.h -ixgbe_ethtool.c -ixgbe_fcoe.h -ixgbe.h
> -ixgbe_main.c -ixgbe_mbx.h -ixgbe_osdep.h -ixgbe_phy.c -ixgbe_phy.h
> -ixgbe_sriov.h -ixgbe_type.h -kcompat.c -kcompat.h - -The source code
> package of igb can be downloaded from sourceforge.net as below. -http://sourceforge.net/projects/e1000/files/igb%20stable/
> -Below <http://sourceforge.net/projects/e1000/files/igb%20stable/-Below>
> source files are copied or modified from igb. - -e1000_82575.c
> -e1000_82575.h -e1000_api.c -e1000_api.h -e1000_defines.h -e1000_hw.h
> -e1000_mac.c -e1000_mac.h -e1000_manage.c -e1000_manage.h -e1000_mbx.c
> -e1000_mbx.h -e1000_nvm.c -e1000_nvm.h -e1000_osdep.h -e1000_phy.c
> -e1000_phy.h -e1000_regs.h -igb_ethtool.c -igb.h -igb_main.c -igb_param.c
> -igb_procfs.c -igb_regtest.h -igb_sysfs.c -igb_vmdq.c -igb_vmdq.h
> -kcompat.c -kcompat_ethtool.c -kcompat.h - diff --git
> a/kernel/linux/kni/ethtool/igb/e1000_82575.c
> b/kernel/linux/kni/ethtool/igb/e1000_82575.c deleted file mode 100644 index
> 98346709d..000000000 --- a/kernel/linux/kni/ethtool/igb/e1000_82575.c +++
> /dev/null @@ -1,3650 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0
> -/*******************************************************************************
> - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel
> Corporation. - - Contact Information: - e1000-devel Mailing List - Intel
> Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 -
> -*******************************************************************************/
> - -/* - * 82575EB Gigabit Network Connection - * 82575EB Gigabit Backplane
> Connection - * 82575GB Gigabit Network Connection - * 82576 Gigabit Network
> Connection - * 82576 Quad Port Gigabit Mezzanine Adapter - * 82580 Gigabit
> Network Connection - * I350 Gigabit Network Connection - */ - -#include
> "e1000_api.h" -#include "e1000_i210.h" - -static s32
> e1000_init_phy_params_82575(struct e1000_hw *hw); -static s32
> e1000_init_mac_params_82575(struct e1000_hw *hw); -static s32
> e1000_acquire_phy_82575(struct e1000_hw *hw); -static void
> e1000_release_phy_82575(struct e1000_hw *hw); -static s32
> e1000_acquire_nvm_82575(struct e1000_hw *hw); -static void
> e1000_release_nvm_82575(struct e1000_hw *hw); -static s32
> e1000_check_for_link_82575(struct e1000_hw *hw); -static s32
> e1000_check_for_link_media_swap(struct e1000_hw *hw); -static s32
> e1000_get_cfg_done_82575(struct e1000_hw *hw); -static s32
> e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16
> *duplex); -static s32 e1000_init_hw_82575(struct e1000_hw *hw); -static s32
> e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); -static s32
> e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16
> *data); -static s32 e1000_reset_hw_82575(struct e1000_hw *hw); -static s32
> e1000_reset_hw_82580(struct e1000_hw *hw); -static s32
> e1000_read_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 *data);
> -static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, - u32 offset,
> u16 data); -static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, -
> bool active); -static s32 e1000_set_d3_lplu_state_82580(struct e1000_hw
> *hw, - bool active); -static s32 e1000_set_d0_lplu_state_82575(struct
> e1000_hw *hw, - bool active); -static s32
> e1000_setup_copper_link_82575(struct e1000_hw *hw); -static s32
> e1000_setup_serdes_link_82575(struct e1000_hw *hw); -static s32
> e1000_get_media_type_82575(struct e1000_hw *hw); -static s32
> e1000_set_sfp_media_type_82575(struct e1000_hw *hw); -static s32
> e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); -static s32
> e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, - u32 offset, u16
> data); -static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw);
> -static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
> -static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16
> *speed, u16 *duplex); -static s32 e1000_get_phy_id_82575(struct e1000_hw
> *hw); -static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16
> mask); -static bool e1000_sgmii_active_82575(struct e1000_hw *hw); -static
> s32 e1000_reset_init_script_82575(struct e1000_hw *hw); -static s32
> e1000_read_mac_addr_82575(struct e1000_hw *hw); -static void
> e1000_config_collision_dist_82575(struct e1000_hw *hw); -static void
> e1000_power_down_phy_copper_82575(struct e1000_hw *hw); -static void
> e1000_shutdown_serdes_link_82575(struct e1000_hw *hw); -static void
> e1000_power_up_serdes_link_82575(struct e1000_hw *hw); -static s32
> e1000_set_pcie_completion_timeout(struct e1000_hw *hw); -static s32
> e1000_reset_mdicnfg_82580(struct e1000_hw *hw); -static s32
> e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); -static s32
> e1000_update_nvm_checksum_82580(struct e1000_hw *hw); -static s32
> e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset);
> -static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, -
> u16 offset); -static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw
> *hw); -static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw);
> -static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32
> value); -static void e1000_clear_vfta_i350(struct e1000_hw *hw); - -static
> void e1000_i2c_start(struct e1000_hw *hw); -static void
> e1000_i2c_stop(struct e1000_hw *hw); -static s32
> e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data); -static s32
> e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data); -static s32
> e1000_get_i2c_ack(struct e1000_hw *hw); -static s32
> e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data); -static s32
> e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data); -static void
> e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); -static void
> e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); -static s32
> e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data); -static
> bool e1000_get_i2c_data(u32 *i2cctl); - -static const u16
> e1000_82580_rxpbs_table[] = { - 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
> -#define E1000_82580_RXPBS_TABLE_SIZE \ -
> (sizeof(e1000_82580_rxpbs_table)/sizeof(u16)) - - -/** - *
> e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO -
> * @hw: pointer to the HW structure - * - * Called to determine if the I2C
> pins are being used for I2C or as an - * external MDIO interface since the
> two options are mutually exclusive. - **/ -static bool
> e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw) -{ - u32 reg = 0; - bool
> ext_mdio = false; - - DEBUGFUNC("e1000_sgmii_uses_mdio_82575"); - - switch
> (hw->mac.type) { - case e1000_82575: - case e1000_82576: - reg =
> E1000_READ_REG(hw, E1000_MDIC); - ext_mdio = !!(reg & E1000_MDIC_DEST); -
> break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case
> e1000_i210: - case e1000_i211: - reg = E1000_READ_REG(hw, E1000_MDICNFG); -
> ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO); - break; - default: - break; -
> } - return ext_mdio; -} - -/** - * e1000_init_phy_params_82575 - Init PHY
> func ptrs. - * @hw: pointer to the HW structure - **/ -static s32
> e1000_init_phy_params_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info
> *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext; - -
> DEBUGFUNC("e1000_init_phy_params_82575"); - - phy->ops.read_i2c_byte =
> e1000_read_i2c_byte_generic; - phy->ops.write_i2c_byte =
> e1000_write_i2c_byte_generic; - - if (hw->phy.media_type !=
> e1000_media_type_copper) { - phy->type = e1000_phy_none; - goto out; - } -
> - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down =
> e1000_power_down_phy_copper_82575; - - phy->autoneg_mask =
> AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - -
> phy->ops.acquire = e1000_acquire_phy_82575; - phy->ops.check_reset_block =
> e1000_check_reset_block_generic; - phy->ops.commit =
> e1000_phy_sw_reset_generic; - phy->ops.get_cfg_done =
> e1000_get_cfg_done_82575; - phy->ops.release = e1000_release_phy_82575; - -
> ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - - if
> (e1000_sgmii_active_82575(hw)) { - phy->ops.reset =
> e1000_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; - } else
> { - phy->ops.reset = e1000_phy_hw_reset_generic; - ctrl_ext &=
> ~E1000_CTRL_I2C_ENA; - } - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
> - e1000_reset_mdicnfg_82580(hw); - - if (e1000_sgmii_active_82575(hw) &&
> !e1000_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg =
> e1000_read_phy_reg_sgmii_82575; - phy->ops.write_reg =
> e1000_write_phy_reg_sgmii_82575; - } else { - switch (hw->mac.type) { -
> case e1000_82580: - case e1000_i350: - case e1000_i354: - phy->ops.read_reg
> = e1000_read_phy_reg_82580; - phy->ops.write_reg =
> e1000_write_phy_reg_82580; - break; - case e1000_i210: - case e1000_i211: -
> phy->ops.read_reg = e1000_read_phy_reg_gs40g; - phy->ops.write_reg =
> e1000_write_phy_reg_gs40g; - break; - default: - phy->ops.read_reg =
> e1000_read_phy_reg_igp; - phy->ops.write_reg = e1000_write_phy_reg_igp; - }
> - } - - /* Set phy->phy_addr and phy->id. */ - ret_val =
> e1000_get_phy_id_82575(hw); - - /* Verify phy id and set remaining function
> pointers */ - switch (phy->id) { - case M88E1543_E_PHY_ID: - case
> I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: -
> case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; -
> phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.get_info =
> e1000_get_phy_info_m88; - if (phy->id == I347AT4_E_PHY_ID || - phy->id ==
> M88E1112_E_PHY_ID || - phy->id == M88E1340M_E_PHY_ID) -
> phy->ops.get_cable_length = - e1000_get_cable_length_m88_gen2; - else if
> (phy->id == M88E1543_E_PHY_ID) - phy->ops.get_cable_length = -
> e1000_get_cable_length_m88_gen2; - else - phy->ops.get_cable_length =
> e1000_get_cable_length_m88; - phy->ops.force_speed_duplex =
> e1000_phy_force_speed_duplex_m88; - /* Check if this PHY is configured for
> media swap. */ - if (phy->id == M88E1112_E_PHY_ID) { - u16 data; - -
> ret_val = phy->ops.write_reg(hw, - E1000_M88E1112_PAGE_ADDR, - 2); - if
> (ret_val) - goto out; - - ret_val = phy->ops.read_reg(hw, -
> E1000_M88E1112_MAC_CTRL_1, - &data); - if (ret_val) - goto out; - - data =
> (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> -
> E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; - if (data ==
> E1000_M88E1112_AUTO_COPPER_SGMII || - data ==
> E1000_M88E1112_AUTO_COPPER_BASEX) - hw->mac.ops.check_for_link = -
> e1000_check_for_link_media_swap; - } - break; - case IGP03E1000_E_PHY_ID: -
> case IGP04E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; -
> phy->ops.check_polarity = e1000_check_polarity_igp; - phy->ops.get_info =
> e1000_get_phy_info_igp; - phy->ops.get_cable_length =
> e1000_get_cable_length_igp_2; - phy->ops.force_speed_duplex =
> e1000_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state =
> e1000_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state =
> e1000_set_d3_lplu_state_generic; - break; - case I82580_I_PHY_ID: - case
> I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.check_polarity =
> e1000_check_polarity_82577; - phy->ops.force_speed_duplex = -
> e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length =
> e1000_get_cable_length_82577; - phy->ops.get_info =
> e1000_get_phy_info_82577; - phy->ops.set_d0_lplu_state =
> e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state =
> e1000_set_d3_lplu_state_82580; - break; - case I210_I_PHY_ID: - phy->type =
> e1000_phy_i210; - phy->ops.check_polarity = e1000_check_polarity_m88; -
> phy->ops.get_info = e1000_get_phy_info_m88; - phy->ops.get_cable_length =
> e1000_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state =
> e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state =
> e1000_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex =
> e1000_phy_force_speed_duplex_m88; - break; - default: - ret_val =
> -E1000_ERR_PHY; - goto out; - } - -out: - return ret_val; -} - -/** - *
> e1000_init_nvm_params_82575 - Init NVM func ptrs. - * @hw: pointer to the
> HW structure - **/ -s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) -{
> - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = E1000_READ_REG(hw,
> E1000_EECD); - u16 size; - - DEBUGFUNC("e1000_init_nvm_params_82575"); - -
> size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> -
> E1000_EECD_SIZE_EX_SHIFT); - /* - * Added to a constant, "size" becomes the
> left-shift value - * for setting word_size. - */ - size +=
> NVM_WORD_SIZE_BASE_SHIFT; - - /* Just in case size is out of range, cap it
> to the largest - * EEPROM size supported - */ - if (size > 15) - size = 15;
> - - nvm->word_size = 1 << size; - if (hw->mac.type < e1000_i210) { -
> nvm->opcode_bits = 8; - nvm->delay_usec = 1; - - switch (nvm->override) { -
> case e1000_nvm_override_spi_large: - nvm->page_size = 32; -
> nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: -
> nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: -
> nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits
> = eecd & E1000_EECD_ADDR_BITS ? - 16 : 8; - break; - } - if (nvm->word_size
> == (1 << 15)) - nvm->page_size = 128; - - nvm->type = e1000_nvm_eeprom_spi;
> - } else { - nvm->type = e1000_nvm_flash_hw; - } - - /* Function Pointers
> */ - nvm->ops.acquire = e1000_acquire_nvm_82575; - nvm->ops.release =
> e1000_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read
> = e1000_read_nvm_eerd; - else - nvm->ops.read = e1000_read_nvm_spi; - -
> nvm->ops.write = e1000_write_nvm_spi; - nvm->ops.validate =
> e1000_validate_nvm_checksum_generic; - nvm->ops.update =
> e1000_update_nvm_checksum_generic; - nvm->ops.valid_led_default =
> e1000_valid_led_default_82575; - - /* override generic family function
> pointers for specific descendants */ - switch (hw->mac.type) { - case
> e1000_82580: - nvm->ops.validate = e1000_validate_nvm_checksum_82580; -
> nvm->ops.update = e1000_update_nvm_checksum_82580; - break; - case
> e1000_i350: - //case e1000_i354: - nvm->ops.validate =
> e1000_validate_nvm_checksum_i350; - nvm->ops.update =
> e1000_update_nvm_checksum_i350; - break; - default: - break; - } - - return
> E1000_SUCCESS; -} - -/** - * e1000_init_mac_params_82575 - Init MAC func
> ptrs. - * @hw: pointer to the HW structure - **/ -static s32
> e1000_init_mac_params_82575(struct e1000_hw *hw) -{ - struct e1000_mac_info
> *mac = &hw->mac; - struct e1000_dev_spec_82575 *dev_spec =
> &hw->dev_spec._82575; - - DEBUGFUNC("e1000_init_mac_params_82575"); - - /*
> Derives media type */ - e1000_get_media_type_82575(hw); - /* Set mta
> register count */ - mac->mta_reg_count = 128; - /* Set uta register count
> */ - mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128; - /* Set
> rar entry count */ - mac->rar_entry_count = E1000_RAR_ENTRIES_82575; - if
> (mac->type == e1000_82576) - mac->rar_entry_count =
> E1000_RAR_ENTRIES_82576; - if (mac->type == e1000_82580) -
> mac->rar_entry_count = E1000_RAR_ENTRIES_82580; - if (mac->type ==
> e1000_i350 || mac->type == e1000_i354) - mac->rar_entry_count =
> E1000_RAR_ENTRIES_I350; - - /* Enable EEE default settings for EEE
> supported devices */ - if (mac->type >= e1000_i350) - dev_spec->eee_disable
> = false; - - /* Allow a single clear of the SW semaphore on I210 and newer
> */ - if (mac->type >= e1000_i210) - dev_spec->clear_semaphore_once = true;
> - - /* Set if part includes ASF firmware */ - mac->asf_firmware_present =
> true; - /* FWSM register */ - mac->has_fwsm = true; - /* ARC supported;
> valid only if manageability features are enabled. */ -
> mac->arc_subsystem_valid = - !!(E1000_READ_REG(hw, E1000_FWSM) &
> E1000_FWSM_MODE_MASK); - - /* Function pointers */ - - /* bus
> type/speed/width */ - mac->ops.get_bus_info =
> e1000_get_bus_info_pcie_generic; - /* reset */ - if (mac->type >=
> e1000_82580) - mac->ops.reset_hw = e1000_reset_hw_82580; - else -
> mac->ops.reset_hw = e1000_reset_hw_82575; - /* hw initialization */ -
> mac->ops.init_hw = e1000_init_hw_82575; - /* link setup */ -
> mac->ops.setup_link = e1000_setup_link_generic; - /* physical interface
> link setup */ - mac->ops.setup_physical_interface = - (hw->phy.media_type
> == e1000_media_type_copper) - ? e1000_setup_copper_link_82575 :
> e1000_setup_serdes_link_82575; - /* physical interface shutdown */ -
> mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; - /* physical
> interface power up */ - mac->ops.power_up_serdes =
> e1000_power_up_serdes_link_82575; - /* check for link */ -
> mac->ops.check_for_link = e1000_check_for_link_82575; - /* read mac address
> */ - mac->ops.read_mac_addr = e1000_read_mac_addr_82575; - /* configure
> collision distance */ - mac->ops.config_collision_dist =
> e1000_config_collision_dist_82575; - /* multicast address update */ -
> mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; - if
> (hw->mac.type == e1000_i350 || mac->type == e1000_i354) { - /* writing VFTA
> */ - mac->ops.write_vfta = e1000_write_vfta_i350; - /* clearing VFTA */ -
> mac->ops.clear_vfta = e1000_clear_vfta_i350; - } else { - /* writing VFTA
> */ - mac->ops.write_vfta = e1000_write_vfta_generic; - /* clearing VFTA */
> - mac->ops.clear_vfta = e1000_clear_vfta_generic; - } - if (hw->mac.type >=
> e1000_82580) - mac->ops.validate_mdi_setting = -
> e1000_validate_mdi_setting_crossover_generic; - /* ID LED init */ -
> mac->ops.id_led_init = e1000_id_led_init_generic; - /* blink LED */ -
> mac->ops.blink_led = e1000_blink_led_generic; - /* setup LED */ -
> mac->ops.setup_led = e1000_setup_led_generic; - /* cleanup LED */ -
> mac->ops.cleanup_led = e1000_cleanup_led_generic; - /* turn on/off LED */ -
> mac->ops.led_on = e1000_led_on_generic; - mac->ops.led_off =
> e1000_led_off_generic; - /* clear hardware counters */ -
> mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575; - /* link info */ -
> mac->ops.get_link_up_info = e1000_get_link_up_info_82575; - /* get thermal
> sensor data */ - mac->ops.get_thermal_sensor_data = -
> e1000_get_thermal_sensor_data_generic; -
> mac->ops.init_thermal_sensor_thresh = -
> e1000_init_thermal_sensor_thresh_generic; - /* acquire SW_FW sync */ -
> mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575; -
> mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575; - if (mac->type
> >= e1000_i210) { - mac->ops.acquire_swfw_sync =
> e1000_acquire_swfw_sync_i210; - mac->ops.release_swfw_sync =
> e1000_release_swfw_sync_i210; - } - - /* set lan id for port to determine
> which phy lock to use */ - hw->mac.ops.set_lan_id(hw); - - return
> E1000_SUCCESS; -} - -/** - * e1000_init_function_pointers_82575 - Init func
> ptrs. - * @hw: pointer to the HW structure - * - * Called to initialize all
> function pointers and parameters. - **/ -void
> e1000_init_function_pointers_82575(struct e1000_hw *hw) -{ -
> DEBUGFUNC("e1000_init_function_pointers_82575"); - -
> hw->mac.ops.init_params = e1000_init_mac_params_82575; -
> hw->nvm.ops.init_params = e1000_init_nvm_params_82575; -
> hw->phy.ops.init_params = e1000_init_phy_params_82575; -
> hw->mbx.ops.init_params = e1000_init_mbx_params_pf; -} - -/** - *
> e1000_acquire_phy_82575 - Acquire rights to access PHY - * @hw: pointer to
> the HW structure - * - * Acquire access rights to the correct PHY. - **/
> -static s32 e1000_acquire_phy_82575(struct e1000_hw *hw) -{ - u16 mask =
> E1000_SWFW_PHY0_SM; - - DEBUGFUNC("e1000_acquire_phy_82575"); - - if
> (hw->bus.func == E1000_FUNC_1) - mask = E1000_SWFW_PHY1_SM; - else if
> (hw->bus.func == E1000_FUNC_2) - mask = E1000_SWFW_PHY2_SM; - else if
> (hw->bus.func == E1000_FUNC_3) - mask = E1000_SWFW_PHY3_SM; - - return
> hw->mac.ops.acquire_swfw_sync(hw, mask); -} - -/** - *
> e1000_release_phy_82575 - Release rights to access PHY - * @hw: pointer to
> the HW structure - * - * A wrapper to release access rights to the correct
> PHY. - **/ -static void e1000_release_phy_82575(struct e1000_hw *hw) -{ -
> u16 mask = E1000_SWFW_PHY0_SM; - - DEBUGFUNC("e1000_release_phy_82575"); -
> - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_SWFW_PHY1_SM; - else if
> (hw->bus.func == E1000_FUNC_2) - mask = E1000_SWFW_PHY2_SM; - else if
> (hw->bus.func == E1000_FUNC_3) - mask = E1000_SWFW_PHY3_SM; - -
> hw->mac.ops.release_swfw_sync(hw, mask); -} - -/** - *
> e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii - * @hw:
> pointer to the HW structure - * @offset: register offset to be read - *
> @data: pointer to the read data - * - * Reads the PHY register at offset
> using the serial gigabit media independent - * interface and stores the
> retrieved information in data. - **/ -static s32
> e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16
> *data) -{ - s32 ret_val = -E1000_ERR_PARAM; - -
> DEBUGFUNC("e1000_read_phy_reg_sgmii_82575"); - - if (offset >
> E1000_MAX_SGMII_PHY_REG_ADDR) { - DEBUGOUT1("PHY Address %u is out of
> range\n", offset); - goto out; - } - - ret_val = hw->phy.ops.acquire(hw); -
> if (ret_val) - goto out; - - ret_val = e1000_read_phy_reg_i2c(hw, offset,
> data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - *
> e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii - * @hw:
> pointer to the HW structure - * @offset: register offset to write to - *
> @data: data to write at register offset - * - * Writes the data to PHY
> register at the offset using the serial gigabit - * media independent
> interface. - **/ -static s32 e1000_write_phy_reg_sgmii_82575(struct
> e1000_hw *hw, u32 offset, - u16 data) -{ - s32 ret_val = -E1000_ERR_PARAM;
> - - DEBUGFUNC("e1000_write_phy_reg_sgmii_82575"); - - if (offset >
> E1000_MAX_SGMII_PHY_REG_ADDR) { - DEBUGOUT1("PHY Address %d is out of
> range\n", offset); - goto out; - } - - ret_val = hw->phy.ops.acquire(hw); -
> if (ret_val) - goto out; - - ret_val = e1000_write_phy_reg_i2c(hw, offset,
> data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - *
> e1000_get_phy_id_82575 - Retrieve PHY addr and id - * @hw: pointer to the
> HW structure - * - * Retrieves the PHY address and ID for both PHY's which
> do and do not use - * sgmi interface. - **/ -static s32
> e1000_get_phy_id_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy
> = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_id; - u32 ctrl_ext; -
> u32 mdic; - - DEBUGFUNC("e1000_get_phy_id_82575"); - - /* i354 devices can
> have a PHY that needs an extra read for id */ - if (hw->mac.type ==
> e1000_i354) - e1000_get_phy_id(hw); - - - /* - * For SGMII PHYs, we try the
> list of possible addresses until - * we find one that works. For non-SGMII
> PHYs - * (e.g. integrated copper PHYs), an address of 1 should - * work.
> The result of this function should mean phy->phy_addr - * and phy->id are
> set correctly. - */ - if (!e1000_sgmii_active_82575(hw)) { - phy->addr = 1;
> - ret_val = e1000_get_phy_id(hw); - goto out; - } - - if
> (e1000_sgmii_uses_mdio_82575(hw)) { - switch (hw->mac.type) { - case
> e1000_82575: - case e1000_82576: - mdic = E1000_READ_REG(hw, E1000_MDIC); -
> mdic &= E1000_MDIC_PHY_MASK; - phy->addr = mdic >> E1000_MDIC_PHY_SHIFT; -
> break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case
> e1000_i210: - case e1000_i211: - mdic = E1000_READ_REG(hw, E1000_MDICNFG);
> - mdic &= E1000_MDICNFG_PHY_MASK; - phy->addr = mdic >>
> E1000_MDICNFG_PHY_SHIFT; - break; - default: - ret_val = -E1000_ERR_PHY; -
> goto out; - break; - } - ret_val = e1000_get_phy_id(hw); - goto out; - } -
> - /* Power on sgmii phy if it is disabled */ - ctrl_ext =
> E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, -
> ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); - E1000_WRITE_FLUSH(hw); -
> msec_delay(300); - - /* - * The address field in the I2CCMD register is 3
> bits and 0 is invalid. - * Therefore, we need to test 1-7 - */ - for
> (phy->addr = 1; phy->addr < 8; phy->addr++) { - ret_val =
> e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); - if (ret_val ==
> E1000_SUCCESS) { - DEBUGOUT2("Vendor ID 0x%08X read at address %u\n", -
> phy_id, phy->addr); - /* - * At the time of this writing, The M88 part is -
> * the only supported SGMII PHY product. - */ - if (phy_id == M88_VENDOR) -
> break; - } else { - DEBUGOUT1("PHY address %u was unreadable\n", -
> phy->addr); - } - } - - /* A valid PHY type couldn't be found. */ - if
> (phy->addr == 8) { - phy->addr = 0; - ret_val = -E1000_ERR_PHY; - } else {
> - ret_val = e1000_get_phy_id(hw); - } - - /* restore previous sfp cage
> power state */ - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - -out: -
> return ret_val; -} - -/** - * e1000_phy_hw_reset_sgmii_82575 - Performs a
> PHY reset - * @hw: pointer to the HW structure - * - * Resets the PHY using
> the serial gigabit media independent interface. - **/ -static s32
> e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) -{ - s32 ret_val =
> E1000_SUCCESS; - - DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575"); - - /* - *
> This isn't a true "hard" reset, but is the only reset - * available to us
> at this time. - */ - - DEBUGOUT("Soft resetting SGMII attached PHY...\n");
> - - if (!(hw->phy.ops.write_reg)) - goto out; - - /* - * SFP documentation
> requires the following to configure the SPF module - * to work on SGMII. No
> further documentation is given. - */ - ret_val = hw->phy.ops.write_reg(hw,
> 0x1B, 0x8084); - if (ret_val) - goto out; - - ret_val =
> hw->phy.ops.commit(hw); - -out: - return ret_val; -} - -/** - *
> e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state - * @hw:
> pointer to the HW structure - * @active: true to enable LPLU, false to
> disable - * - * Sets the LPLU D0 state according to the active flag. When -
> * activating LPLU this function also disables smart speed - * and vice
> versa. LPLU will not be activated unless the - * device autonegotiation
> advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at
> all duplexes. - * This is a function pointer entry point only called by - *
> PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_82575(struct
> e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; -
> s32 ret_val = E1000_SUCCESS; - u16 data; - -
> DEBUGFUNC("e1000_set_d0_lplu_state_82575"); - - if
> (!(hw->phy.ops.read_reg)) - goto out; - - ret_val = phy->ops.read_reg(hw,
> IGP02E1000_PHY_POWER_MGMT, &data); - if (ret_val) - goto out; - - if
> (active) { - data |= IGP02E1000_PM_D0_LPLU; - ret_val =
> phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - if (ret_val) -
> goto out; - - /* When LPLU is enabled, we should disable SmartSpeed */ -
> ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); -
> data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw,
> IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } else {
> - data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_reg(hw,
> IGP02E1000_PHY_POWER_MGMT, - data); - /* - * LPLU and SmartSpeed are
> mutually exclusive. LPLU is used - * during Dx states where the power
> conservation is most - * important. During driver activity we should enable
> - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed
> == e1000_smart_speed_on) { - ret_val = phy->ops.read_reg(hw, -
> IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - goto out; - - data
> |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, -
> IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } else if
> (phy->smart_speed == e1000_smart_speed_off) { - ret_val =
> phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if
> (ret_val) - goto out; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val
> = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if
> (ret_val) - goto out; - } - } - -out: - return ret_val; -} - -/** - *
> e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state - * @hw:
> pointer to the HW structure - * @active: true to enable LPLU, false to
> disable - * - * Sets the LPLU D0 state according to the active flag. When -
> * activating LPLU this function also disables smart speed - * and vice
> versa. LPLU will not be activated unless the - * device autonegotiation
> advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at
> all duplexes. - * This is a function pointer entry point only called by - *
> PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_82580(struct
> e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; -
> s32 ret_val = E1000_SUCCESS; - u32 data; - -
> DEBUGFUNC("e1000_set_d0_lplu_state_82580"); - - data = E1000_READ_REG(hw,
> E1000_82580_PHY_POWER_MGMT); - - if (active) { - data |=
> E1000_82580_PM_D0_LPLU; - - /* When LPLU is enabled, we should disable
> SmartSpeed */ - data &= ~E1000_82580_PM_SPD; - } else { - data &=
> ~E1000_82580_PM_D0_LPLU; - - /* - * LPLU and SmartSpeed are mutually
> exclusive. LPLU is used - * during Dx states where the power conservation
> is most - * important. During driver activity we should enable - *
> SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed ==
> e1000_smart_speed_on) - data |= E1000_82580_PM_SPD; - else if
> (phy->smart_speed == e1000_smart_speed_off) - data &= ~E1000_82580_PM_SPD;
> - } - - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); - return
> ret_val; -} - -/** - * e1000_set_d3_lplu_state_82580 - Sets low power link
> up state for D3 - * @hw: pointer to the HW structure - * @active: boolean
> used to enable/disable lplu - * - * Success returns 0, Failure returns 1 -
> * - * The low power link up (lplu) state is set to the power management
> level D3 - * and SmartSpeed is disabled when active is true, else clear
> lplu for D3 - * and enable Smartspeed. LPLU and Smartspeed are mutually
> exclusive. LPLU - * is used during Dx states where the power conservation
> is most important. - * During driver activity, SmartSpeed should be enabled
> so performance is - * maintained. - **/ -s32
> e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) -{ - struct
> e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 data;
> - - DEBUGFUNC("e1000_set_d3_lplu_state_82580"); - - data =
> E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - - if (!active) { - data
> &= ~E1000_82580_PM_D3_LPLU; - /* - * LPLU and SmartSpeed are mutually
> exclusive. LPLU is used - * during Dx states where the power conservation
> is most - * important. During driver activity we should enable - *
> SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed ==
> e1000_smart_speed_on) - data |= E1000_82580_PM_SPD; - else if
> (phy->smart_speed == e1000_smart_speed_off) - data &= ~E1000_82580_PM_SPD;
> - } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || -
> (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || -
> (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { - data |=
> E1000_82580_PM_D3_LPLU; - /* When LPLU is enabled, we should disable
> SmartSpeed */ - data &= ~E1000_82580_PM_SPD; - } - - E1000_WRITE_REG(hw,
> E1000_82580_PHY_POWER_MGMT, data); - return ret_val; -} - -/** - *
> e1000_acquire_nvm_82575 - Request for access to EEPROM - * @hw: pointer to
> the HW structure - * - * Acquire the necessary semaphores for exclusive
> access to the EEPROM. - * Set the EEPROM access request bit and wait for
> EEPROM access grant bit. - * Return successful if access grant bit set,
> else clear the request for - * EEPROM access and return -E1000_ERR_NVM
> (-1). - **/ -static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw) -{ -
> s32 ret_val; - - DEBUGFUNC("e1000_acquire_nvm_82575"); - - ret_val =
> e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); - if (ret_val) - goto
> out; - - /* - * Check if there is some access - * error this access may
> hook on - */ - if (hw->mac.type == e1000_i350) { - u32 eecd =
> E1000_READ_REG(hw, E1000_EECD); - if (eecd & (E1000_EECD_BLOCKED |
> E1000_EECD_ABORT | - E1000_EECD_TIMEOUT)) { - /* Clear all access error
> flags */ - E1000_WRITE_REG(hw, E1000_EECD, eecd | - E1000_EECD_ERROR_CLR);
> - DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); - } - }
> - if (hw->mac.type == e1000_82580) { - u32 eecd = E1000_READ_REG(hw,
> E1000_EECD); - if (eecd & E1000_EECD_BLOCKED) { - /* Clear access error
> flag */ - E1000_WRITE_REG(hw, E1000_EECD, eecd | - E1000_EECD_BLOCKED); -
> DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); - } - } -
> - - ret_val = e1000_acquire_nvm_generic(hw); - if (ret_val) -
> e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); - -out: - return
> ret_val; -} - -/** - * e1000_release_nvm_82575 - Release exclusive access
> to EEPROM - * @hw: pointer to the HW structure - * - * Stop any current
> commands to the EEPROM and clear the EEPROM request bit, - * then release
> the semaphores acquired. - **/ -static void e1000_release_nvm_82575(struct
> e1000_hw *hw) -{ - DEBUGFUNC("e1000_release_nvm_82575"); - -
> e1000_release_nvm_generic(hw); - - e1000_release_swfw_sync_82575(hw,
> E1000_SWFW_EEP_SM); -} - -/** - * e1000_acquire_swfw_sync_82575 - Acquire
> SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies
> which semaphore to acquire - * - * Acquire the SW/FW semaphore to access
> the PHY or NVM. The mask - * will also specify which port we're acquiring
> the lock for. - **/ -static s32 e1000_acquire_swfw_sync_82575(struct
> e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - u32 swmask = mask; - u32
> fwmask = mask << 16; - s32 ret_val = E1000_SUCCESS; - s32 i = 0, timeout =
> 200; /* FIXME: find real value to use here */ - -
> DEBUGFUNC("e1000_acquire_swfw_sync_82575"); - - while (i < timeout) { - if
> (e1000_get_hw_semaphore_generic(hw)) { - ret_val = -E1000_ERR_SWFW_SYNC; -
> goto out; - } - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - if
> (!(swfw_sync & (fwmask | swmask))) - break; - - /* - * Firmware currently
> using resource (fwmask) - * or other software thread using resource
> (swmask) - */ - e1000_put_hw_semaphore_generic(hw); - msec_delay_irq(5); -
> i++; - } - - if (i == timeout) { - DEBUGOUT("Driver can't access resource,
> SW_FW_SYNC timeout.\n"); - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - }
> - - swfw_sync |= swmask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC,
> swfw_sync); - - e1000_put_hw_semaphore_generic(hw); - -out: - return
> ret_val; -} - -/** - * e1000_release_swfw_sync_82575 - Release SW/FW
> semaphore - * @hw: pointer to the HW structure - * @mask: specifies which
> semaphore to acquire - * - * Release the SW/FW semaphore used to access the
> PHY or NVM. The mask - * will also specify which port we're releasing the
> lock for. - **/ -static void e1000_release_swfw_sync_82575(struct e1000_hw
> *hw, u16 mask) -{ - u32 swfw_sync; - -
> DEBUGFUNC("e1000_release_swfw_sync_82575"); - - while
> (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS) - ; /* Empty */ - -
> swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - swfw_sync &= ~mask; -
> E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - -
> e1000_put_hw_semaphore_generic(hw); -} - -/** - * e1000_get_cfg_done_82575
> - Read config done bit - * @hw: pointer to the HW structure - * - * Read
> the management control register for the config done bit for - * completion
> status. NOTE: silicon which is EEPROM-less will fail trying - * to read the
> config done bit, so an error is *ONLY* logged and returns - *
> E1000_SUCCESS. If we were to return with error, EEPROM-less silicon - *
> would not be able to be reset or change link. - **/ -static s32
> e1000_get_cfg_done_82575(struct e1000_hw *hw) -{ - s32 timeout =
> PHY_CFG_TIMEOUT; - s32 ret_val = E1000_SUCCESS; - u32 mask =
> E1000_NVM_CFG_DONE_PORT_0; - - DEBUGFUNC("e1000_get_cfg_done_82575"); - -
> if (hw->bus.func == E1000_FUNC_1) - mask = E1000_NVM_CFG_DONE_PORT_1; -
> else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_NVM_CFG_DONE_PORT_2;
> - else if (hw->bus.func == E1000_FUNC_3) - mask =
> E1000_NVM_CFG_DONE_PORT_3; - while (timeout) { - if (E1000_READ_REG(hw,
> E1000_EEMNGCTL) & mask) - break; - msec_delay(1); - timeout--; - } - if
> (!timeout) - DEBUGOUT("MNG configuration cycle has not completed.\n"); - -
> /* If EEPROM is not marked present, init the PHY manually */ - if
> (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && - (hw->phy.type ==
> e1000_phy_igp_3)) - e1000_phy_init_script_igp3(hw); - - return ret_val; -}
> - -/** - * e1000_get_link_up_info_82575 - Get link speed/duplex info - *
> @hw: pointer to the HW structure - * @speed: stores the current speed - *
> @duplex: stores the current duplex - * - * This is a wrapper function, if
> using the serial gigabit media independent - * interface, use PCS to
> retrieve the link speed and duplex information. - * Otherwise, use the
> generic function to get the link speed and duplex info. - **/ -static s32
> e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16
> *duplex) -{ - s32 ret_val; - - DEBUGFUNC("e1000_get_link_up_info_82575"); -
> - if (hw->phy.media_type != e1000_media_type_copper) - ret_val =
> e1000_get_pcs_speed_and_duplex_82575(hw, speed, - duplex); - else - ret_val
> = e1000_get_speed_and_duplex_copper_generic(hw, speed, - duplex); - -
> return ret_val; -} - -/** - * e1000_check_for_link_82575 - Check for link -
> * @hw: pointer to the HW structure - * - * If sgmii is enabled, then use
> the pcs register to determine link, otherwise - * use the generic interface
> for determining link. - **/ -static s32 e1000_check_for_link_82575(struct
> e1000_hw *hw) -{ - s32 ret_val; - u16 speed, duplex; - -
> DEBUGFUNC("e1000_check_for_link_82575"); - - if (hw->phy.media_type !=
> e1000_media_type_copper) { - ret_val =
> e1000_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); - /* - * Use
> this flag to determine if link needs to be checked or - * not. If we have
> link clear the flag so that we do not - * continue to check for link. - */
> - hw->mac.get_link_status = !hw->mac.serdes_has_link; - - /* - * Configure
> Flow Control now that Auto-Neg has completed. - * First, we need to restore
> the desired flow control - * settings because we may have had to re-autoneg
> with a - * different link partner. - */ - ret_val =
> e1000_config_fc_after_link_up_generic(hw); - if (ret_val) - DEBUGOUT("Error
> configuring flow control\n"); - } else { - ret_val =
> e1000_check_for_copper_link_generic(hw); - } - - return ret_val; -} - -/**
> - * e1000_check_for_link_media_swap - Check which M88E1112 interface linked
> - * @hw: pointer to the HW structure - * - * Poll the M88E1112 interfaces
> to see which interface achieved link. - */ -static s32
> e1000_check_for_link_media_swap(struct e1000_hw *hw) -{ - struct
> e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - u8 port = 0; -
> - DEBUGFUNC("e1000_check_for_link_media_swap"); - - /* Check the copper
> medium. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
> - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw,
> E1000_M88E1112_STATUS, &data); - if (ret_val) - return ret_val; - - if
> (data & E1000_M88E1112_STATUS_LINK) - port = E1000_MEDIA_PORT_COPPER; - -
> /* Check the other medium. */ - ret_val = phy->ops.write_reg(hw,
> E1000_M88E1112_PAGE_ADDR, 1); - if (ret_val) - return ret_val; - - ret_val
> = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); - if (ret_val) -
> return ret_val; - - if (data & E1000_M88E1112_STATUS_LINK) - port =
> E1000_MEDIA_PORT_OTHER; - - /* Determine if a swap needs to happen. */ - if
> (port && (hw->dev_spec._82575.media_port != port)) { -
> hw->dev_spec._82575.media_port = port; - hw->dev_spec._82575.media_changed
> = true; - } else { - ret_val = e1000_check_for_link_82575(hw); - } - -
> return E1000_SUCCESS; -} - -/** - * e1000_power_up_serdes_link_82575 -
> Power up the serdes link after shutdown - * @hw: pointer to the HW
> structure - **/ -static void e1000_power_up_serdes_link_82575(struct
> e1000_hw *hw) -{ - u32 reg; - -
> DEBUGFUNC("e1000_power_up_serdes_link_82575"); - - if ((hw->phy.media_type
> != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) -
> return; - - /* Enable PCS to turn on link */ - reg = E1000_READ_REG(hw,
> E1000_PCS_CFG0); - reg |= E1000_PCS_CFG_PCS_EN; - E1000_WRITE_REG(hw,
> E1000_PCS_CFG0, reg); - - /* Power up the laser */ - reg =
> E1000_READ_REG(hw, E1000_CTRL_EXT); - reg &= ~E1000_CTRL_EXT_SDP3_DATA; -
> E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); - - /* flush the write to verify
> completion */ - E1000_WRITE_FLUSH(hw); - msec_delay(1); -} - -/** - *
> e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex - *
> @hw: pointer to the HW structure - * @speed: stores the current speed - *
> @duplex: stores the current duplex - * - * Using the physical coding
> sub-layer (PCS), retrieve the current speed and - * duplex, then store the
> values in the pointers provided. - **/ -static s32
> e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16
> *duplex) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 pcs; - u32
> status; - - DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575"); - - /* - *
> Read the PCS Status register for link state. For non-copper mode, - * the
> status register is not accurate. The PCS status register is - * used
> instead. - */ - pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT); - - /* - * The
> link up bit determines when link is up on autoneg. - */ - if (pcs &
> E1000_PCS_LSTS_LINK_OK) { - mac->serdes_has_link = true; - - /* Detect and
> store PCS speed */ - if (pcs & E1000_PCS_LSTS_SPEED_1000) - *speed =
> SPEED_1000; - else if (pcs & E1000_PCS_LSTS_SPEED_100) - *speed =
> SPEED_100; - else - *speed = SPEED_10; - - /* Detect and store PCS duplex
> */ - if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) - *duplex = FULL_DUPLEX; - else
> - *duplex = HALF_DUPLEX; - - /* Check if it is an I354 2.5Gb backplane
> connection. */ - if (mac->type == e1000_i354) { - status =
> E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) &&
> - !(status & E1000_STATUS_2P5_SKU_OVER)) { - *speed = SPEED_2500; - *duplex
> = FULL_DUPLEX; - DEBUGOUT("2500 Mbs, "); - DEBUGOUT("Full Duplex\n"); - } -
> } - - } else { - mac->serdes_has_link = false; - *speed = 0; - *duplex = 0;
> - } - - return E1000_SUCCESS; -} - -/** - *
> e1000_shutdown_serdes_link_82575 - Remove link during power down - * @hw:
> pointer to the HW structure - * - * In the case of serdes shut down sfp and
> PCS on driver unload - * when management pass through is not enabled. - **/
> -void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw) -{ - u32 reg; -
> - DEBUGFUNC("e1000_shutdown_serdes_link_82575"); - - if
> ((hw->phy.media_type != e1000_media_type_internal_serdes) && -
> !e1000_sgmii_active_82575(hw)) - return; - - if
> (!e1000_enable_mng_pass_thru(hw)) { - /* Disable PCS to turn off link */ -
> reg = E1000_READ_REG(hw, E1000_PCS_CFG0); - reg &= ~E1000_PCS_CFG_PCS_EN; -
> E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); - - /* shutdown the laser */ -
> reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg |=
> E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); - -
> /* flush the write to verify completion */ - E1000_WRITE_FLUSH(hw); -
> msec_delay(1); - } - - return; -} - -/** - * e1000_reset_hw_82575 - Reset
> hardware - * @hw: pointer to the HW structure - * - * This resets the
> hardware into a known state. - **/ -static s32 e1000_reset_hw_82575(struct
> e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - -
> DEBUGFUNC("e1000_reset_hw_82575"); - - /* - * Prevent the PCI-E bus from
> sticking if there is no TLP connection - * on the last TLP read/write
> transaction when MAC is reset. - */ - ret_val =
> e1000_disable_pcie_master_generic(hw); - if (ret_val) - DEBUGOUT("PCI-E
> Master disable polling has failed.\n"); - - /* set the completion timeout
> for interface */ - ret_val = e1000_set_pcie_completion_timeout(hw); - if
> (ret_val) - DEBUGOUT("PCI-E Set completion timeout has failed.\n"); - -
> DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, E1000_IMC,
> 0xffffffff); - - E1000_WRITE_REG(hw, E1000_RCTL, 0); - E1000_WRITE_REG(hw,
> E1000_TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); - - msec_delay(10); -
> - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - DEBUGOUT("Issuing a global
> reset to MAC\n"); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
> - - ret_val = e1000_get_auto_rd_done_generic(hw); - if (ret_val) { - /* - *
> When auto config read does not complete, do not - * return with an error.
> This can happen in situations - * where there is no eeprom and prevents
> getting link. - */ - DEBUGOUT("Auto Read Done did not complete\n"); - } - -
> /* If EEPROM is not present, run manual init scripts */ - if
> (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES)) -
> e1000_reset_init_script_82575(hw); - - /* Clear any pending interrupt
> events. */ - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); -
> E1000_READ_REG(hw, E1000_ICR); - - /* Install any alternate MAC address
> into RAR0 */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - - return
> ret_val; -} - -/** - * e1000_init_hw_82575 - Initialize hardware - * @hw:
> pointer to the HW structure - * - * This inits the hardware readying it for
> operation. - **/ -static s32 e1000_init_hw_82575(struct e1000_hw *hw) -{ -
> struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - u16 i, rar_count =
> mac->rar_entry_count; - - DEBUGFUNC("e1000_init_hw_82575"); - - /*
> Initialize identification LED */ - ret_val = mac->ops.id_led_init(hw); - if
> (ret_val) { - DEBUGOUT("Error initializing identification LED\n"); - /*
> This is not fatal and we should not stop init due to this */ - } - - /*
> Disabling VLAN filtering */ - DEBUGOUT("Initializing the IEEE VLAN\n"); -
> mac->ops.clear_vfta(hw); - - /* Setup the receive address */ -
> e1000_init_rx_addrs_generic(hw, rar_count); - - /* Zero out the Multicast
> HASH table */ - DEBUGOUT("Zeroing the MTA\n"); - for (i = 0; i <
> mac->mta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); - -
> /* Zero out the Unicast HASH table */ - DEBUGOUT("Zeroing the UTA\n"); -
> for (i = 0; i < mac->uta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw,
> E1000_UTA, i, 0); - - /* Setup link and flow control */ - ret_val =
> mac->ops.setup_link(hw); - - /* Set the default MTU size */ -
> hw->dev_spec._82575.mtu = 1500; - - /* - * Clear all of the statistics
> registers (clear on read). It is - * important that we do this after we
> have tried to establish link - * because the symbol error count will
> increment wildly if there - * is no link. - */ -
> e1000_clear_hw_cntrs_82575(hw); - - return ret_val; -} - -/** - *
> e1000_setup_copper_link_82575 - Configure copper link settings - * @hw:
> pointer to the HW structure - * - * Configures the link for auto-neg or
> forced speed and duplex. Then we check - * for link, once link is
> established calls to configure collision distance - * and flow control are
> called. - **/ -static s32 e1000_setup_copper_link_82575(struct e1000_hw
> *hw) -{ - u32 ctrl; - s32 ret_val; - u32 phpm_reg; - -
> DEBUGFUNC("e1000_setup_copper_link_82575"); - - ctrl = E1000_READ_REG(hw,
> E1000_CTRL); - ctrl |= E1000_CTRL_SLU; - ctrl &= ~(E1000_CTRL_FRCSPD |
> E1000_CTRL_FRCDPX); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Clear
> Go Link Disconnect bit on supported devices */ - switch (hw->mac.type) { -
> case e1000_82580: - case e1000_i350: - case e1000_i210: - case e1000_i211:
> - phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - phpm_reg &=
> ~E1000_82580_PM_GO_LINKD; - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT,
> phpm_reg); - break; - default: - break; - } - - ret_val =
> e1000_setup_serdes_link_82575(hw); - if (ret_val) - goto out; - - if
> (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) { - /* allow time
> for SFP cage time to power up phy */ - msec_delay(300); - - ret_val =
> hw->phy.ops.reset(hw); - if (ret_val) { - DEBUGOUT("Error resetting the
> PHY.\n"); - goto out; - } - } - switch (hw->phy.type) { - case
> e1000_phy_i210: - case e1000_phy_m88: - switch (hw->phy.id) { - case
> I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: -
> case M88E1543_E_PHY_ID: - case I210_I_PHY_ID: - ret_val =
> e1000_copper_link_setup_m88_gen2(hw); - break; - default: - ret_val =
> e1000_copper_link_setup_m88(hw); - break; - } - break; - case
> e1000_phy_igp_3: - ret_val = e1000_copper_link_setup_igp(hw); - break; -
> case e1000_phy_82580: - ret_val = e1000_copper_link_setup_82577(hw); -
> break; - default: - ret_val = -E1000_ERR_PHY; - break; - } - - if (ret_val)
> - goto out; - - ret_val = e1000_setup_copper_link_generic(hw); -out: -
> return ret_val; -} - -/** - * e1000_setup_serdes_link_82575 - Setup link
> for serdes - * @hw: pointer to the HW structure - * - * Configure the
> physical coding sub-layer (PCS) link. The PCS link is - * used on copper
> connections where the serialized gigabit media independent - * interface
> (sgmii), or serdes fiber is being used. Configures the link - * for
> auto-negotiation or forces speed/duplex. - **/ -static s32
> e1000_setup_serdes_link_82575(struct e1000_hw *hw) -{ - u32 ctrl_ext,
> ctrl_reg, reg, anadv_reg; - bool pcs_autoneg; - s32 ret_val =
> E1000_SUCCESS; - u16 data; - - DEBUGFUNC("e1000_setup_serdes_link_82575");
> - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && -
> !e1000_sgmii_active_82575(hw)) - return ret_val; - - /* - * On the 82575,
> SerDes loopback mode persists until it is - * explicitly turned off or a
> power cycle is performed. A read to - * the register does not indicate its
> status. Therefore, we ensure - * loopback mode is disabled during
> initialization. - */ - E1000_WRITE_REG(hw, E1000_SCTL,
> E1000_SCTL_DISABLE_SERDES_LOOPBACK); - - /* power on the sfp cage if
> present */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext &=
> ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
> - - ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); - ctrl_reg |=
> E1000_CTRL_SLU; - - /* set both sw defined pins on 82575/82576*/ - if
> (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) - ctrl_reg |=
> E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; - - reg = E1000_READ_REG(hw,
> E1000_PCS_LCTL); - - /* default pcs_autoneg to the same setting as mac
> autoneg */ - pcs_autoneg = hw->mac.autoneg; - - switch (ctrl_ext &
> E1000_CTRL_EXT_LINK_MODE_MASK) { - case E1000_CTRL_EXT_LINK_MODE_SGMII: -
> /* sgmii mode lets the phy handle forcing speed/duplex */ - pcs_autoneg =
> true; - /* autoneg time out should be disabled for SGMII mode */ - reg &=
> ~(E1000_PCS_LCTL_AN_TIMEOUT); - break; - case
> E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - /* disable PCS autoneg and support
> parallel detect only */ - pcs_autoneg = false; - /* fall through to default
> case */ - default: - if (hw->mac.type == e1000_82575 || - hw->mac.type ==
> e1000_82576) { - ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); - if
> (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if
> (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT) - pcs_autoneg = false; - } -
> - /* - * non-SGMII modes only supports a speed of 1000/Full for the - *
> link so it is best to just force the MAC and let the pcs - * link either
> autoneg or be forced to 1000/Full - */ - ctrl_reg |= E1000_CTRL_SPD_1000 |
> E1000_CTRL_FRCSPD | - E1000_CTRL_FD | E1000_CTRL_FRCDPX; - - /* set speed
> of 1000/Full if speed/duplex is forced */ - reg |= E1000_PCS_LCTL_FSV_1000
> | E1000_PCS_LCTL_FDV_FULL; - break; - } - - E1000_WRITE_REG(hw, E1000_CTRL,
> ctrl_reg); - - /* - * New SerDes mode allows for forcing speed or
> autonegotiating speed - * at 1gb. Autoneg should be default set by most
> drivers. This is the - * mode that will be compatible with older link
> partners and switches. - * However, both are supported by the hardware and
> some drivers/tools. - */ - reg &= ~(E1000_PCS_LCTL_AN_ENABLE |
> E1000_PCS_LCTL_FLV_LINK_UP | - E1000_PCS_LCTL_FSD |
> E1000_PCS_LCTL_FORCE_LINK); - - if (pcs_autoneg) { - /* Set PCS register
> for autoneg */ - reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ -
> E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ - - /* Disable force flow
> control for autoneg */ - reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; - - /*
> Configure flow control advertisement for autoneg */ - anadv_reg =
> E1000_READ_REG(hw, E1000_PCS_ANADV); - anadv_reg &= ~(E1000_TXCW_ASM_DIR |
> E1000_TXCW_PAUSE); - - switch (hw->fc.requested_mode) { - case
> e1000_fc_full: - case e1000_fc_rx_pause: - anadv_reg |= E1000_TXCW_ASM_DIR;
> - anadv_reg |= E1000_TXCW_PAUSE; - break; - case e1000_fc_tx_pause: -
> anadv_reg |= E1000_TXCW_ASM_DIR; - break; - default: - break; - } - -
> E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg); - - DEBUGOUT1("Configuring
> Autoneg:PCS_LCTL=0x%08X\n", reg); - } else { - /* Set PCS register for
> forced link */ - reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ - - /* Force
> flow control for forced link */ - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - -
> DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); - } - -
> E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); - - if (!pcs_autoneg &&
> !e1000_sgmii_active_82575(hw)) - e1000_force_mac_fc_generic(hw); - - return
> ret_val; -} - -/** - * e1000_get_media_type_82575 - derives current media
> type. - * @hw: pointer to the HW structure - * - * The media type is chosen
> reflecting few settings. - * The following are taken into account: - * -
> link mode set in the current port Init Control Word #3 - * - current link
> mode settings in CSR register - * - MDIO vs. I2C PHY control interface
> chosen - * - SFP module media type - **/ -static s32
> e1000_get_media_type_82575(struct e1000_hw *hw) -{ - struct
> e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - s32 ret_val =
> E1000_SUCCESS; - u32 ctrl_ext = 0; - u32 link_mode = 0; - - /* Set internal
> phy as default */ - dev_spec->sgmii_active = false; -
> dev_spec->module_plugged = false; - - /* Get CSR setting */ - ctrl_ext =
> E1000_READ_REG(hw, E1000_CTRL_EXT); - - /* extract link mode setting */ -
> link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; - - switch
> (link_mode) { - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: -
> hw->phy.media_type = e1000_media_type_internal_serdes; - break; - case
> E1000_CTRL_EXT_LINK_MODE_GMII: - hw->phy.media_type =
> e1000_media_type_copper; - break; - case E1000_CTRL_EXT_LINK_MODE_SGMII: -
> /* Get phy control interface type set (MDIO vs. I2C)*/ - if
> (e1000_sgmii_uses_mdio_82575(hw)) { - hw->phy.media_type =
> e1000_media_type_copper; - dev_spec->sgmii_active = true; - break; - } - /*
> fall through for I2C based SGMII */ - case
> E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: - /* read media type from SFP EEPROM
> */ - ret_val = e1000_set_sfp_media_type_82575(hw); - if ((ret_val !=
> E1000_SUCCESS) || - (hw->phy.media_type == e1000_media_type_unknown)) { -
> /* - * If media type was not identified then return media - * type defined
> by the CTRL_EXT settings. - */ - hw->phy.media_type =
> e1000_media_type_internal_serdes; - - if (link_mode ==
> E1000_CTRL_EXT_LINK_MODE_SGMII) { - hw->phy.media_type =
> e1000_media_type_copper; - dev_spec->sgmii_active = true; - } - - break; -
> } - - /* do not change link mode for 100BaseFX */ - if
> (dev_spec->eth_flags.e100_base_fx) - break; - - /* change current link mode
> setting */ - ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; - - if
> (hw->phy.media_type == e1000_media_type_copper) - ctrl_ext |=
> E1000_CTRL_EXT_LINK_MODE_SGMII; - else - ctrl_ext |=
> E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - - E1000_WRITE_REG(hw,
> E1000_CTRL_EXT, ctrl_ext); - - break; - } - - return ret_val; -} - -/** - *
> e1000_set_sfp_media_type_82575 - derives SFP module media type. - * @hw:
> pointer to the HW structure - * - * The media type is chosen based on SFP
> module. - * compatibility flags retrieved from SFP ID EEPROM. - **/ -static
> s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw) -{ - s32 ret_val =
> E1000_ERR_CONFIG; - u32 ctrl_ext = 0; - struct e1000_dev_spec_82575
> *dev_spec = &hw->dev_spec._82575; - struct sfp_e1000_flags *eth_flags =
> &dev_spec->eth_flags; - u8 tranceiver_type = 0; - s32 timeout = 3; - - /*
> Turn I2C interface ON and power on sfp cage */ - ctrl_ext =
> E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext &=
> ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext |
> E1000_CTRL_I2C_ENA); - - E1000_WRITE_FLUSH(hw); - - /* Read SFP module data
> */ - while (timeout) { - ret_val = e1000_read_sfp_data_byte(hw, -
> E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), -
> &tranceiver_type); - if (ret_val == E1000_SUCCESS) - break; -
> msec_delay(100); - timeout--; - } - if (ret_val != E1000_SUCCESS) - goto
> out; - - ret_val = e1000_read_sfp_data_byte(hw, -
> E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), - (u8 *)eth_flags);
> - if (ret_val != E1000_SUCCESS) - goto out; - - /* Check if there is some
> SFP module plugged and powered */ - if ((tranceiver_type ==
> E1000_SFF_IDENTIFIER_SFP) || - (tranceiver_type ==
> E1000_SFF_IDENTIFIER_SFF)) { - dev_spec->module_plugged = true; - if
> (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { -
> hw->phy.media_type = e1000_media_type_internal_serdes; - } else if
> (eth_flags->e100_base_fx) { - dev_spec->sgmii_active = true; -
> hw->phy.media_type = e1000_media_type_internal_serdes; - } else if
> (eth_flags->e1000_base_t) { - dev_spec->sgmii_active = true; -
> hw->phy.media_type = e1000_media_type_copper; - } else { -
> hw->phy.media_type = e1000_media_type_unknown; - DEBUGOUT("PHY module has
> not been recognized\n"); - goto out; - } - } else { - hw->phy.media_type =
> e1000_media_type_unknown; - } - ret_val = E1000_SUCCESS; -out: - /* Restore
> I2C interface setting */ - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); -
> return ret_val; -} - -/** - * e1000_valid_led_default_82575 - Verify a
> valid default LED config - * @hw: pointer to the HW structure - * @data:
> pointer to the NVM (EEPROM) - * - * Read the EEPROM for the current default
> LED configuration. If the - * LED configuration is not valid, set to a
> valid LED configuration. - **/ -static s32
> e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data) -{ - s32
> ret_val; - - DEBUGFUNC("e1000_valid_led_default_82575"); - - ret_val =
> hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { -
> DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if (*data ==
> ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { - switch
> (hw->phy.media_type) { - case e1000_media_type_internal_serdes: - *data =
> ID_LED_DEFAULT_82575_SERDES; - break; - case e1000_media_type_copper: -
> default: - *data = ID_LED_DEFAULT; - break; - } - } -out: - return ret_val;
> -} - -/** - * e1000_sgmii_active_82575 - Return sgmii state - * @hw:
> pointer to the HW structure - * - * 82575 silicon has a serialized gigabit
> media independent interface (sgmii) - * which can be enabled for use in the
> embedded applications. Simply - * return the current state of the sgmii
> interface. - **/ -static bool e1000_sgmii_active_82575(struct e1000_hw *hw)
> -{ - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - return
> dev_spec->sgmii_active; -} - -/** - * e1000_reset_init_script_82575 - Inits
> HW defaults after reset - * @hw: pointer to the HW structure - * - * Inits
> recommended HW defaults after a reset when there is no EEPROM - * detected.
> This is only for the 82575. - **/ -static s32
> e1000_reset_init_script_82575(struct e1000_hw *hw) -{ -
> DEBUGFUNC("e1000_reset_init_script_82575"); - - if (hw->mac.type ==
> e1000_82575) { - DEBUGOUT("Running reset init script for 82575\n"); - /*
> SerDes configuration via SERDESCTRL */ -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C); -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78); -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23); -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15); - - /* CCM
> configuration via CCMCTL register */ -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00); -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00); - - /*
> PCIe lanes configuration */ - e1000_write_8bit_ctrl_reg_generic(hw,
> E1000_GIOCTL, 0x00, 0xEC); - e1000_write_8bit_ctrl_reg_generic(hw,
> E1000_GIOCTL, 0x61, 0xDF); - e1000_write_8bit_ctrl_reg_generic(hw,
> E1000_GIOCTL, 0x34, 0x05); - e1000_write_8bit_ctrl_reg_generic(hw,
> E1000_GIOCTL, 0x2F, 0x81); - - /* PCIe PLL Configuration */ -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47); -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00); -
> e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00); - } - -
> return E1000_SUCCESS; -} - -/** - * e1000_read_mac_addr_82575 - Read device
> MAC address - * @hw: pointer to the HW structure - **/ -static s32
> e1000_read_mac_addr_82575(struct e1000_hw *hw) -{ - s32 ret_val =
> E1000_SUCCESS; - - DEBUGFUNC("e1000_read_mac_addr_82575"); - - /* - * If
> there's an alternate MAC address place it in RAR0 - * so that it will
> override the Si installed default perm - * address. - */ - ret_val =
> e1000_check_alt_mac_addr_generic(hw); - if (ret_val) - goto out; - -
> ret_val = e1000_read_mac_addr_generic(hw); - -out: - return ret_val; -} -
> -/** - * e1000_config_collision_dist_82575 - Configure collision distance -
> * @hw: pointer to the HW structure - * - * Configures the collision
> distance to the default value and is used - * during link setup. - **/
> -static void e1000_config_collision_dist_82575(struct e1000_hw *hw) -{ -
> u32 tctl_ext; - - DEBUGFUNC("e1000_config_collision_dist_82575"); - -
> tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT); - - tctl_ext &=
> ~E1000_TCTL_EXT_COLD; - tctl_ext |= E1000_COLLISION_DISTANCE <<
> E1000_TCTL_EXT_COLD_SHIFT; - - E1000_WRITE_REG(hw, E1000_TCTL_EXT,
> tctl_ext); - E1000_WRITE_FLUSH(hw); -} - -/** - *
> e1000_power_down_phy_copper_82575 - Remove link during PHY power down - *
> @hw: pointer to the HW structure - * - * In the case of a PHY power down to
> save power, or to turn off link during a - * driver unload, or wake on lan
> is not enabled, remove the link. - **/ -static void
> e1000_power_down_phy_copper_82575(struct e1000_hw *hw) -{ - struct
> e1000_phy_info *phy = &hw->phy; - - if (!(phy->ops.check_reset_block)) -
> return; - - /* If the management interface is not enabled, then power down
> */ - if (!(e1000_enable_mng_pass_thru(hw) ||
> phy->ops.check_reset_block(hw))) - e1000_power_down_phy_copper(hw); - -
> return; -} - -/** - * e1000_clear_hw_cntrs_82575 - Clear device specific
> hardware counters - * @hw: pointer to the HW structure - * - * Clears the
> hardware counters by reading the counter registers. - **/ -static void
> e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) -{ -
> DEBUGFUNC("e1000_clear_hw_cntrs_82575"); - -
> e1000_clear_hw_cntrs_base_generic(hw); - - E1000_READ_REG(hw, E1000_PRC64);
> - E1000_READ_REG(hw, E1000_PRC127); - E1000_READ_REG(hw, E1000_PRC255); -
> E1000_READ_REG(hw, E1000_PRC511); - E1000_READ_REG(hw, E1000_PRC1023); -
> E1000_READ_REG(hw, E1000_PRC1522); - E1000_READ_REG(hw, E1000_PTC64); -
> E1000_READ_REG(hw, E1000_PTC127); - E1000_READ_REG(hw, E1000_PTC255); -
> E1000_READ_REG(hw, E1000_PTC511); - E1000_READ_REG(hw, E1000_PTC1023); -
> E1000_READ_REG(hw, E1000_PTC1522); - - E1000_READ_REG(hw, E1000_ALGNERRC);
> - E1000_READ_REG(hw, E1000_RXERRC); - E1000_READ_REG(hw, E1000_TNCRS); -
> E1000_READ_REG(hw, E1000_CEXTERR); - E1000_READ_REG(hw, E1000_TSCTC); -
> E1000_READ_REG(hw, E1000_TSCTFC); - - E1000_READ_REG(hw, E1000_MGTPRC); -
> E1000_READ_REG(hw, E1000_MGTPDC); - E1000_READ_REG(hw, E1000_MGTPTC); - -
> E1000_READ_REG(hw, E1000_IAC); - E1000_READ_REG(hw, E1000_ICRXOC); - -
> E1000_READ_REG(hw, E1000_ICRXPTC); - E1000_READ_REG(hw, E1000_ICRXATC); -
> E1000_READ_REG(hw, E1000_ICTXPTC); - E1000_READ_REG(hw, E1000_ICTXATC); -
> E1000_READ_REG(hw, E1000_ICTXQEC); - E1000_READ_REG(hw, E1000_ICTXQMTC); -
> E1000_READ_REG(hw, E1000_ICRXDMTC); - - E1000_READ_REG(hw, E1000_CBTMPC); -
> E1000_READ_REG(hw, E1000_HTDPMC); - E1000_READ_REG(hw, E1000_CBRMPC); -
> E1000_READ_REG(hw, E1000_RPTHC); - E1000_READ_REG(hw, E1000_HGPTC); -
> E1000_READ_REG(hw, E1000_HTCBDPC); - E1000_READ_REG(hw, E1000_HGORCL); -
> E1000_READ_REG(hw, E1000_HGORCH); - E1000_READ_REG(hw, E1000_HGOTCL); -
> E1000_READ_REG(hw, E1000_HGOTCH); - E1000_READ_REG(hw, E1000_LENERRS); - -
> /* This register should not be read in copper configurations */ - if
> ((hw->phy.media_type == e1000_media_type_internal_serdes) || -
> e1000_sgmii_active_82575(hw)) - E1000_READ_REG(hw, E1000_SCVPC); -} - -/**
> - * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable - * @hw:
> pointer to the HW structure - * - * After rx enable if managability is
> enabled then there is likely some - * bad data at the start of the fifo and
> possibly in the DMA fifo. This - * function clears the fifos and flushes
> any packets that came in as rx was - * being enabled. - **/ -void
> e1000_rx_fifo_flush_82575(struct e1000_hw *hw) -{ - u32 rctl, rlpml,
> rxdctl[4], rfctl, temp_rctl, rx_enabled; - int i, ms_wait; - -
> DEBUGFUNC("e1000_rx_fifo_workaround_82575"); - if (hw->mac.type !=
> e1000_82575 || - !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN))
> - return; - - /* Disable all Rx queues */ - for (i = 0; i < 4; i++) { -
> rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); - E1000_WRITE_REG(hw,
> E1000_RXDCTL(i), - rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); - } - /* Poll
> all queues to verify they have shut down */ - for (ms_wait = 0; ms_wait <
> 10; ms_wait++) { - msec_delay(1); - rx_enabled = 0; - for (i = 0; i < 4;
> i++) - rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i)); - if
> (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) - break; - } - - if (ms_wait ==
> 10) - DEBUGOUT("Queue disable timed out after 10ms\n"); - - /* Clear RLPML,
> RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all - * incoming packets are
> rejected. Set enable and wait 2ms so that - * any packet that was coming in
> as RCTL.EN was set is flushed - */ - rfctl = E1000_READ_REG(hw,
> E1000_RFCTL); - E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
> - - rlpml = E1000_READ_REG(hw, E1000_RLPML); - E1000_WRITE_REG(hw,
> E1000_RLPML, 0); - - rctl = E1000_READ_REG(hw, E1000_RCTL); - temp_rctl =
> rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); - temp_rctl |= E1000_RCTL_LPE; -
> - E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl); - E1000_WRITE_REG(hw,
> E1000_RCTL, temp_rctl | E1000_RCTL_EN); - E1000_WRITE_FLUSH(hw); -
> msec_delay(2); - - /* Enable Rx queues that were previously enabled and
> restore our - * previous state - */ - for (i = 0; i < 4; i++) -
> E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]); - E1000_WRITE_REG(hw,
> E1000_RCTL, rctl); - E1000_WRITE_FLUSH(hw); - - E1000_WRITE_REG(hw,
> E1000_RLPML, rlpml); - E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); - - /*
> Flush receive errors generated by workaround */ - E1000_READ_REG(hw,
> E1000_ROC); - E1000_READ_REG(hw, E1000_RNBC); - E1000_READ_REG(hw,
> E1000_MPC); -} - -/** - * e1000_set_pcie_completion_timeout - set pci-e
> completion timeout - * @hw: pointer to the HW structure - * - * The
> defaults for 82575 and 82576 should be in the range of 50us to 50ms, - *
> however the hardware default for these parts is 500us to 1ms which is less
> - * than the 10ms recommended by the pci-e spec. To address this we need to
> - * increase the value to either 10ms to 200ms for capability version 1
> config, - * or 16ms to 55ms for version 2. - **/ -static s32
> e1000_set_pcie_completion_timeout(struct e1000_hw *hw) -{ - u32 gcr =
> E1000_READ_REG(hw, E1000_GCR); - s32 ret_val = E1000_SUCCESS; - u16
> pcie_devctl2; - - /* only take action if timeout value is defaulted to 0 */
> - if (gcr & E1000_GCR_CMPL_TMOUT_MASK) - goto out; - - /* - * if
> capababilities version is type 1 we can write the - * timeout of 10ms to
> 200ms through the GCR register - */ - if (!(gcr & E1000_GCR_CAP_VER2)) { -
> gcr |= E1000_GCR_CMPL_TMOUT_10ms; - goto out; - } - - /* - * for version 2
> capabilities we need to write the config space - * directly in order to set
> the completion timeout value for - * 16ms to 55ms - */ - ret_val =
> e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); - if
> (ret_val) - goto out; - - pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; - -
> ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, -
> &pcie_devctl2); -out: - /* disable completion timeout resend */ - gcr &=
> ~E1000_GCR_CMPL_TMOUT_RESEND; - - E1000_WRITE_REG(hw, E1000_GCR, gcr); -
> return ret_val; -} - -/** - * e1000_vmdq_set_anti_spoofing_pf - enable or
> disable anti-spoofing - * @hw: pointer to the hardware struct - * @enable:
> state to enter, either enabled or disabled - * @pf: Physical Function pool
> - do not set anti-spoofing for the PF - * - * enables/disables L2 switch
> anti-spoofing functionality. - **/ -void
> e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
> -{ - u32 reg_val, reg_offset; - - switch (hw->mac.type) { - case
> e1000_82576: - reg_offset = E1000_DTXSWC; - break; - case e1000_i350: -
> case e1000_i354: - reg_offset = E1000_TXSWC; - break; - default: - return;
> - } - - reg_val = E1000_READ_REG(hw, reg_offset); - if (enable) { - reg_val
> |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The
> PF can spoof - it has to in order to - * support emulation mode NICs - */ -
> reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - reg_val &=
> ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } -
> E1000_WRITE_REG(hw, reg_offset, reg_val); -} - -/** - *
> e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback - * @hw:
> pointer to the hardware struct - * @enable: state to enter, either enabled
> or disabled - * - * enables/disables L2 switch loopback functionality. -
> **/ -void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) -{ -
> u32 dtxswc; - - switch (hw->mac.type) { - case e1000_82576: - dtxswc =
> E1000_READ_REG(hw, E1000_DTXSWC); - if (enable) - dtxswc |=
> E1000_DTXSWC_VMDQ_LOOPBACK_EN; - else - dtxswc &=
> ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; - E1000_WRITE_REG(hw, E1000_DTXSWC,
> dtxswc); - break; - case e1000_i350: - case e1000_i354: - dtxswc =
> E1000_READ_REG(hw, E1000_TXSWC); - if (enable) - dtxswc |=
> E1000_DTXSWC_VMDQ_LOOPBACK_EN; - else - dtxswc &=
> ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; - E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc);
> - break; - default: - /* Currently no other hardware supports loopback */ -
> break; - } - - -} - -/** - * e1000_vmdq_set_replication_pf - enable or
> disable vmdq replication - * @hw: pointer to the hardware struct - *
> @enable: state to enter, either enabled or disabled - * - *
> enables/disables replication of packets across multiple pools. - **/ -void
> e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) -{ - u32
> vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL); - - if (enable) - vt_ctl |=
> E1000_VT_CTL_VM_REPL_EN; - else - vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN; - -
> E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl); -} - -/** - *
> e1000_read_phy_reg_82580 - Read 82580 MDI control register - * @hw: pointer
> to the HW structure - * @offset: register offset to be read - * @data:
> pointer to the read data - * - * Reads the MDI control register in the PHY
> at offset and stores the - * information read to data. - **/ -static s32
> e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) -{ -
> s32 ret_val; - - DEBUGFUNC("e1000_read_phy_reg_82580"); - - ret_val =
> hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val =
> e1000_read_phy_reg_mdic(hw, offset, data); - - hw->phy.ops.release(hw); -
> -out: - return ret_val; -} - -/** - * e1000_write_phy_reg_82580 - Write
> 82580 MDI control register - * @hw: pointer to the HW structure - *
> @offset: register offset to write to - * @data: data to write to register
> at offset - * - * Writes data to MDI control register in the PHY at offset.
> - **/ -static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32
> offset, u16 data) -{ - s32 ret_val; - -
> DEBUGFUNC("e1000_write_phy_reg_82580"); - - ret_val =
> hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val =
> e1000_write_phy_reg_mdic(hw, offset, data); - - hw->phy.ops.release(hw); -
> -out: - return ret_val; -} - -/** - * e1000_reset_mdicnfg_82580 - Reset
> MDICNFG destination and com_mdio bits - * @hw: pointer to the HW structure
> - * - * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based
> on - * the values found in the EEPROM. This addresses an issue in which
> these - * bits are not restored from EEPROM after reset. - **/ -static s32
> e1000_reset_mdicnfg_82580(struct e1000_hw *hw) -{ - s32 ret_val =
> E1000_SUCCESS; - u32 mdicnfg; - u16 nvm_data = 0; - -
> DEBUGFUNC("e1000_reset_mdicnfg_82580"); - - if (hw->mac.type !=
> e1000_82580) - goto out; - if (!e1000_sgmii_active_82575(hw)) - goto out; -
> - ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + -
> NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &nvm_data); - if (ret_val) {
> - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - mdicnfg =
> E1000_READ_REG(hw, E1000_MDICNFG); - if (nvm_data & NVM_WORD24_EXT_MDIO) -
> mdicnfg |= E1000_MDICNFG_EXT_MDIO; - if (nvm_data & NVM_WORD24_COM_MDIO) -
> mdicnfg |= E1000_MDICNFG_COM_MDIO; - E1000_WRITE_REG(hw, E1000_MDICNFG,
> mdicnfg); -out: - return ret_val; -} - -/** - * e1000_reset_hw_82580 -
> Reset hardware - * @hw: pointer to the HW structure - * - * This resets
> function or entire device (all ports, etc.) - * to a known state. - **/
> -static s32 e1000_reset_hw_82580(struct e1000_hw *hw) -{ - s32 ret_val =
> E1000_SUCCESS; - /* BH SW mailbox bit in SW_FW_SYNC */ - u16 swmbsw_mask =
> E1000_SW_SYNCH_MB; - u32 ctrl; - bool global_device_reset =
> hw->dev_spec._82575.global_device_reset; - -
> DEBUGFUNC("e1000_reset_hw_82580"); - -
> hw->dev_spec._82575.global_device_reset = false; - - /* 82580 does not
> reliably do global_device_reset due to hw errata */ - if (hw->mac.type ==
> e1000_82580) - global_device_reset = false; - - /* Get current control
> state. */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - /* - * Prevent the
> PCI-E bus from sticking if there is no TLP connection - * on the last TLP
> read/write transaction when MAC is reset. - */ - ret_val =
> e1000_disable_pcie_master_generic(hw); - if (ret_val) - DEBUGOUT("PCI-E
> Master disable polling has failed.\n"); - - DEBUGOUT("Masking off all
> interrupts\n"); - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); -
> E1000_WRITE_REG(hw, E1000_RCTL, 0); - E1000_WRITE_REG(hw, E1000_TCTL,
> E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); - - msec_delay(10); - - /*
> Determine whether or not a global dev reset is requested */ - if
> (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw, - swmbsw_mask)) -
> global_device_reset = false; - - if (global_device_reset &&
> !(E1000_READ_REG(hw, E1000_STATUS) & - E1000_STAT_DEV_RST_SET)) - ctrl |=
> E1000_CTRL_DEV_RST; - else - ctrl |= E1000_CTRL_RST; - -
> E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - E1000_WRITE_FLUSH(hw); - - /* Add
> delay to insure DEV_RST has time to complete */ - if (global_device_reset)
> - msec_delay(5); - - ret_val = e1000_get_auto_rd_done_generic(hw); - if
> (ret_val) { - /* - * When auto config read does not complete, do not - *
> return with an error. This can happen in situations - * where there is no
> eeprom and prevents getting link. - */ - DEBUGOUT("Auto Read Done did not
> complete\n"); - } - - /* clear global device reset status bit */ -
> E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET); - - /* Clear any
> pending interrupt events. */ - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
> - E1000_READ_REG(hw, E1000_ICR); - - ret_val =
> e1000_reset_mdicnfg_82580(hw); - if (ret_val) - DEBUGOUT("Could not reset
> MDICNFG based on EEPROM\n"); - - /* Install any alternate MAC address into
> RAR0 */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - - /* Release
> semaphore */ - if (global_device_reset) - hw->mac.ops.release_swfw_sync(hw,
> swmbsw_mask); - - return ret_val; -} - -/** - * e1000_rxpbs_adjust_82580 -
> adjust RXPBS value to reflect actual Rx PBA size - * @data: data received
> by reading RXPBS register - * - * The 82580 uses a table based approach for
> packet buffer allocation sizes. - * This function converts the retrieved
> value into the correct table value - * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 - *
> 0x0 36 72 144 1 2 4 8 16 - * 0x8 35 70 140 rsv rsv rsv rsv rsv - */ -u16
> e1000_rxpbs_adjust_82580(u32 data) -{ - u16 ret_val = 0; - - if (data <
> E1000_82580_RXPBS_TABLE_SIZE) - ret_val = e1000_82580_rxpbs_table[data]; -
> - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_with_offset -
> Validate EEPROM - * checksum - * @hw: pointer to the HW structure - *
> @offset: offset in words of the checksum protected region - * - *
> Calculates the EEPROM checksum by reading/adding each word of the EEPROM -
> * and then verifies that the sum of the EEPROM is equal to 0xBABA. - **/
> -s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16
> offset) -{ - s32 ret_val = E1000_SUCCESS; - u16 checksum = 0; - u16 i,
> nvm_data; - - DEBUGFUNC("e1000_validate_nvm_checksum_with_offset"); - - for
> (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) { - ret_val =
> hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM
> Read Error\n"); - goto out; - } - checksum += nvm_data; - } - - if
> (checksum != (u16) NVM_SUM) { - DEBUGOUT("NVM Checksum Invalid\n"); -
> ret_val = -E1000_ERR_NVM; - goto out; - } - -out: - return ret_val; -} -
> -/** - * e1000_update_nvm_checksum_with_offset - Update EEPROM - * checksum
> - * @hw: pointer to the HW structure - * @offset: offset in words of the
> checksum protected region - * - * Updates the EEPROM checksum by
> reading/adding each word of the EEPROM - * up to the checksum. Then
> calculates the EEPROM checksum and writes the - * value to the EEPROM. -
> **/ -s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16
> offset) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - -
> DEBUGFUNC("e1000_update_nvm_checksum_with_offset"); - - for (i = offset; i
> < (NVM_CHECKSUM_REG + offset); i++) { - ret_val = hw->nvm.ops.read(hw, i,
> 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error while updating
> checksum.\n"); - goto out; - } - checksum += nvm_data; - } - checksum =
> (u16) NVM_SUM - checksum; - ret_val = hw->nvm.ops.write(hw,
> (NVM_CHECKSUM_REG + offset), 1, - &checksum); - if (ret_val) -
> DEBUGOUT("NVM Write Error while updating checksum.\n"); - -out: - return
> ret_val; -} - -/** - * e1000_validate_nvm_checksum_82580 - Validate EEPROM
> checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM
> section checksum by reading/adding each word of - * the EEPROM and then
> verifies that the sum of the EEPROM is - * equal to 0xBABA. - **/ -static
> s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) -{ - s32 ret_val
> = E1000_SUCCESS; - u16 eeprom_regions_count = 1; - u16 j, nvm_data; - u16
> nvm_offset; - - DEBUGFUNC("e1000_validate_nvm_checksum_82580"); - - ret_val
> = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); - if
> (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if
> (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { - /* if chekcsums compatibility
> bit is set validate checksums - * for all 4 ports. */ -
> eeprom_regions_count = 4; - } - - for (j = 0; j < eeprom_regions_count;
> j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val =
> e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); - if (ret_val !=
> E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - *
> e1000_update_nvm_checksum_82580 - Update EEPROM checksum - * @hw: pointer
> to the HW structure - * - * Updates the EEPROM section checksums for all 4
> ports by reading/adding - * each word of the EEPROM up to the checksum.
> Then calculates the EEPROM - * checksum and writes the value to the EEPROM.
> - **/ -static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) -{ -
> s32 ret_val; - u16 j, nvm_data; - u16 nvm_offset; - -
> DEBUGFUNC("e1000_update_nvm_checksum_82580"); - - ret_val =
> hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); - if (ret_val)
> { - DEBUGOUT("NVM Read Error while updating checksum compatibility
> bit.\n"); - goto out; - } - - if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK))
> { - /* set compatibility bit to validate checksums appropriately */ -
> nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; - ret_val =
> hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, - &nvm_data); - if
> (ret_val) { - DEBUGOUT("NVM Write Error while updating checksum
> compatibility bit.\n"); - goto out; - } - } - - for (j = 0; j < 4; j++) { -
> nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val =
> e1000_update_nvm_checksum_with_offset(hw, nvm_offset); - if (ret_val) -
> goto out; - } - -out: - return ret_val; -} - -/** - *
> e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum - * @hw:
> pointer to the HW structure - * - * Calculates the EEPROM section checksum
> by reading/adding each word of - * the EEPROM and then verifies that the
> sum of the EEPROM is - * equal to 0xBABA. - **/ -static s32
> e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) -{ - s32 ret_val =
> E1000_SUCCESS; - u16 j; - u16 nvm_offset; - -
> DEBUGFUNC("e1000_validate_nvm_checksum_i350"); - - for (j = 0; j < 4; j++)
> { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val =
> e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); - if (ret_val !=
> E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - *
> e1000_update_nvm_checksum_i350 - Update EEPROM checksum - * @hw: pointer to
> the HW structure - * - * Updates the EEPROM section checksums for all 4
> ports by reading/adding - * each word of the EEPROM up to the checksum.
> Then calculates the EEPROM - * checksum and writes the value to the EEPROM.
> - **/ -static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw) -{ -
> s32 ret_val = E1000_SUCCESS; - u16 j; - u16 nvm_offset; - -
> DEBUGFUNC("e1000_update_nvm_checksum_i350"); - - for (j = 0; j < 4; j++) {
> - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val =
> e1000_update_nvm_checksum_with_offset(hw, nvm_offset); - if (ret_val !=
> E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - *
> __e1000_access_emi_reg - Read/write EMI register - * @hw: pointer to the HW
> structure - * @addr: EMI address to program - * @data: pointer to value to
> read/write from/to the EMI address - * @read: boolean flag to indicate read
> or write - **/ -static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16
> address, - u16 *data, bool read) -{ - s32 ret_val = E1000_SUCCESS; - -
> DEBUGFUNC("__e1000_access_emi_reg"); - - ret_val =
> hw->phy.ops.write_reg(hw, E1000_EMIADD, address); - if (ret_val) - return
> ret_val; - - if (read) - ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA,
> data); - else - ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data);
> - - return ret_val; -} - -/** - * e1000_read_emi_reg - Read Extended
> Management Interface register - * @hw: pointer to the HW structure - *
> @addr: EMI address to program - * @data: value to be read from the EMI
> address - **/ -s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16
> *data) -{ - DEBUGFUNC("e1000_read_emi_reg"); - - return
> __e1000_access_emi_reg(hw, addr, data, true); -} - -/** - *
> e1000_set_eee_i350 - Enable/disable EEE support - * @hw: pointer to the HW
> structure - * - * Enable/disable EEE based on setting in dev_spec
> structure. - * - **/ -s32 e1000_set_eee_i350(struct e1000_hw *hw) -{ - s32
> ret_val = E1000_SUCCESS; - u32 ipcnfg, eeer; - -
> DEBUGFUNC("e1000_set_eee_i350"); - - if ((hw->mac.type < e1000_i350) || -
> (hw->phy.media_type != e1000_media_type_copper)) - goto out; - ipcnfg =
> E1000_READ_REG(hw, E1000_IPCNFG); - eeer = E1000_READ_REG(hw, E1000_EEER);
> - - /* enable or disable per user setting */ - if
> (!(hw->dev_spec._82575.eee_disable)) { - u32 eee_su = E1000_READ_REG(hw,
> E1000_EEE_SU); - - ipcnfg |= (E1000_IPCNFG_EEE_1G_AN |
> E1000_IPCNFG_EEE_100M_AN); - eeer |= (E1000_EEER_TX_LPI_EN |
> E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); - - /* This bit should not be
> set in normal operation. */ - if (eee_su & E1000_EEE_SU_LPI_CLK_STP) -
> DEBUGOUT("LPI Clock Stop Bit should not be set!\n"); - } else { - ipcnfg &=
> ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); - eeer &=
> ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); - } -
> E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); - E1000_WRITE_REG(hw,
> E1000_EEER, eeer); - E1000_READ_REG(hw, E1000_IPCNFG); - E1000_READ_REG(hw,
> E1000_EEER); -out: - - return ret_val; -} - -/** - * e1000_set_eee_i354 -
> Enable/disable EEE support - * @hw: pointer to the HW structure - * - *
> Enable/disable EEE legacy mode based on setting in dev_spec structure. - *
> - **/ -s32 e1000_set_eee_i354(struct e1000_hw *hw) -{ - struct
> e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16
> phy_data; - - DEBUGFUNC("e1000_set_eee_i354"); - - if ((hw->phy.media_type
> != e1000_media_type_copper) || - ((phy->id != M88E1543_E_PHY_ID))) - goto
> out; - - if (!hw->dev_spec._82575.eee_disable) { - /* Switch to PHY page
> 18. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); -
> if (ret_val) - goto out; - - ret_val = phy->ops.read_reg(hw,
> E1000_M88E1543_EEE_CTRL_1, - &phy_data); - if (ret_val) - goto out; - -
> phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; - ret_val =
> phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, - phy_data); - if
> (ret_val) - goto out; - - /* Return the PHY to page 0. */ - ret_val =
> phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); - if (ret_val) - goto
> out; - - /* Turn on EEE advertisement. */ - ret_val =
> e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354,
> - &phy_data); - if (ret_val) - goto out; - - phy_data |=
> E1000_EEE_ADV_100_SUPPORTED | - E1000_EEE_ADV_1000_SUPPORTED; - ret_val =
> e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, -
> E1000_EEE_ADV_DEV_I354, - phy_data); - } else { - /* Turn off EEE
> advertisement. */ - ret_val = e1000_read_xmdio_reg(hw,
> E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - &phy_data); - if
> (ret_val) - goto out; - - phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | -
> E1000_EEE_ADV_1000_SUPPORTED); - ret_val = e1000_write_xmdio_reg(hw,
> E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - phy_data); - } - -out:
> - return ret_val; -} - -/** - * e1000_get_eee_status_i354 - Get EEE status
> - * @hw: pointer to the HW structure - * @status: EEE status - * - * Get
> EEE status by guessing based on whether Tx or Rx LPI indications have - *
> been received. - **/ -s32 e1000_get_eee_status_i354(struct e1000_hw *hw,
> bool *status) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val =
> E1000_SUCCESS; - u16 phy_data; - - DEBUGFUNC("e1000_get_eee_status_i354");
> - - /* Check if EEE is supported on this device. */ - if
> ((hw->phy.media_type != e1000_media_type_copper) || - ((phy->id !=
> M88E1543_E_PHY_ID))) - goto out; - - ret_val = e1000_read_xmdio_reg(hw,
> E1000_PCS_STATUS_ADDR_I354, - E1000_PCS_STATUS_DEV_I354, - &phy_data); - if
> (ret_val) - goto out; - - *status = phy_data &
> (E1000_PCS_STATUS_TX_LPI_RCVD | - E1000_PCS_STATUS_RX_LPI_RCVD) ? true :
> false; - -out: - return ret_val; -} - -/* Due to a hw errata, if the host
> tries to configure the VFTA register - * while performing queries from the
> BMC or DMA, then the VFTA in some - * cases won't be written. - */ - -/** -
> * e1000_clear_vfta_i350 - Clear VLAN filter table - * @hw: pointer to the
> HW structure - * - * Clears the register array which contains the VLAN
> filter table by - * setting all the values to 0. - **/ -void
> e1000_clear_vfta_i350(struct e1000_hw *hw) -{ - u32 offset; - int i; - -
> DEBUGFUNC("e1000_clear_vfta_350"); - - for (offset = 0; offset <
> E1000_VLAN_FILTER_TBL_SIZE; offset++) { - for (i = 0; i < 10; i++) -
> E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); - -
> E1000_WRITE_FLUSH(hw); - } -} - -/** - * e1000_write_vfta_i350 - Write
> value to VLAN filter table - * @hw: pointer to the HW structure - *
> @offset: register offset in VLAN filter table - * @value: register value
> written to VLAN filter table - * - * Writes value at the given offset in
> the regi
Ferruh Yigit Dec. 18, 2018, 9:20 a.m. | #2
On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
> Hi Ferruh,
> 
> Please, look at my patch http://patches.dpdk.org/patch/48454/ and consider
> rebasing your patch over mine.

Sorry about that, yes I will check it today.

> 
> As we discussed with Stephen, KNI needs to supply ethtool_ops with
> .get_link function, to properly support link status.
> So we should save ethtool_ops and implement .get_link using standard
> ethtool_op_get_link.
> 
> Best regards,
> Igor
Ferruh Yigit Dec. 18, 2018, 6:17 p.m. | #3
On 12/18/2018 9:20 AM, Ferruh Yigit wrote:
> On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
>> Hi Ferruh,
>>
>> Please, look at my patch http://patches.dpdk.org/patch/48454/ and consider
>> rebasing your patch over mine.
> 
> Sorry about that, yes I will check it today.

Hi Igor,

I put some comments on your patch.

As far as I can see it also has a target to remove current type of ethtool
support, so this RFC should not be a concern to you.
All ethtool support can be removed, when you have an actual solution for driver
independent ethtool support only a little code needs to be added back.

Thanks,
ferruh

> 
>>
>> As we discussed with Stephen, KNI needs to supply ethtool_ops with
>> .get_link function, to properly support link status.
>> So we should save ethtool_ops and implement .get_link using standard
>> ethtool_op_get_link.
>>
>> Best regards,
>> Igor
> 
>
Igor Ryzhov Jan. 5, 2019, 4:55 p.m. | #4
Hi Ferruh,

I answered in another thread.

Regarding this patch – I have no objections now.

Best regards,
Igor

On Tue, Dec 18, 2018 at 9:17 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:

> On 12/18/2018 9:20 AM, Ferruh Yigit wrote:
> > On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
> >> Hi Ferruh,
> >>
> >> Please, look at my patch http://patches.dpdk.org/patch/48454/ and
> consider
> >> rebasing your patch over mine.
> >
> > Sorry about that, yes I will check it today.
>
> Hi Igor,
>
> I put some comments on your patch.
>
> As far as I can see it also has a target to remove current type of ethtool
> support, so this RFC should not be a concern to you.
> All ethtool support can be removed, when you have an actual solution for
> driver
> independent ethtool support only a little code needs to be added back.
>
> Thanks,
> ferruh
>
> >
> >>
> >> As we discussed with Stephen, KNI needs to supply ethtool_ops with
> >> .get_link function, to properly support link status.
> >> So we should save ethtool_ops and implement .get_link using standard
> >> ethtool_op_get_link.
> >>
> >> Best regards,
> >> Igor
> >
> >
>
>
Igor Ryzhov Feb. 6, 2019, 1:12 p.m. | #5
Hi Ferruh,

What's the plan with this patch?

Best regards,
Igor

On Sat, Jan 5, 2019 at 7:55 PM Igor Ryzhov <iryzhov@nfware.com> wrote:

> Hi Ferruh,
>
> I answered in another thread.
>
> Regarding this patch – I have no objections now.
>
> Best regards,
> Igor
>
> On Tue, Dec 18, 2018 at 9:17 PM Ferruh Yigit <ferruh.yigit@intel.com>
> wrote:
>
>> On 12/18/2018 9:20 AM, Ferruh Yigit wrote:
>> > On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
>> >> Hi Ferruh,
>> >>
>> >> Please, look at my patch http://patches.dpdk.org/patch/48454/ and
>> consider
>> >> rebasing your patch over mine.
>> >
>> > Sorry about that, yes I will check it today.
>>
>> Hi Igor,
>>
>> I put some comments on your patch.
>>
>> As far as I can see it also has a target to remove current type of ethtool
>> support, so this RFC should not be a concern to you.
>> All ethtool support can be removed, when you have an actual solution for
>> driver
>> independent ethtool support only a little code needs to be added back.
>>
>> Thanks,
>> ferruh
>>
>> >
>> >>
>> >> As we discussed with Stephen, KNI needs to supply ethtool_ops with
>> >> .get_link function, to properly support link status.
>> >> So we should save ethtool_ops and implement .get_link using standard
>> >> ethtool_op_get_link.
>> >>
>> >> Best regards,
>> >> Igor
>> >
>> >
>>
>>
Ferruh Yigit Feb. 18, 2019, 12:33 p.m. | #6
On 2/6/2019 1:12 PM, Igor Ryzhov wrote:
> Hi Ferruh,
> 
> What's the plan with this patch?

Hi Igor,

I just sent a deprecation notice for this:
https://patches.dpdk.org/patch/50347/

If the deprecation notice approved, requires 3 acks, note will go into 19.05
And later this patch can go in 19.08

Thanks,
ferruh

> 
> Best regards,
> Igor
> 
> On Sat, Jan 5, 2019 at 7:55 PM Igor Ryzhov <iryzhov@nfware.com
> <mailto:iryzhov@nfware.com>> wrote:
> 
>     Hi Ferruh,
> 
>     I answered in another thread.
> 
>     Regarding this patch – I have no objections now.
> 
>     Best regards,
>     Igor
> 
>     On Tue, Dec 18, 2018 at 9:17 PM Ferruh Yigit <ferruh.yigit@intel.com
>     <mailto:ferruh.yigit@intel.com>> wrote:
> 
>         On 12/18/2018 9:20 AM, Ferruh Yigit wrote:
>         > On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
>         >> Hi Ferruh,
>         >>
>         >> Please, look at my patch http://patches.dpdk.org/patch/48454/ and
>         consider
>         >> rebasing your patch over mine.
>         >
>         > Sorry about that, yes I will check it today.
> 
>         Hi Igor,
> 
>         I put some comments on your patch.
> 
>         As far as I can see it also has a target to remove current type of ethtool
>         support, so this RFC should not be a concern to you.
>         All ethtool support can be removed, when you have an actual solution for
>         driver
>         independent ethtool support only a little code needs to be added back.
> 
>         Thanks,
>         ferruh
> 
>         >
>         >>
>         >> As we discussed with Stephen, KNI needs to supply ethtool_ops with
>         >> .get_link function, to properly support link status.
>         >> So we should save ethtool_ops and implement .get_link using standard
>         >> ethtool_op_get_link.
>         >>
>         >> Best regards,
>         >> Igor
>         >
>         >
>
Igor Ryzhov Feb. 18, 2019, 1:07 p.m. | #7
Hi Ferruh,

Thanks. Should I be a maintainer to ack the patch?

Best regards,
Igor

On Mon, Feb 18, 2019 at 3:33 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:

> On 2/6/2019 1:12 PM, Igor Ryzhov wrote:
> > Hi Ferruh,
> >
> > What's the plan with this patch?
>
> Hi Igor,
>
> I just sent a deprecation notice for this:
> https://patches.dpdk.org/patch/50347/
>
> If the deprecation notice approved, requires 3 acks, note will go into
> 19.05
> And later this patch can go in 19.08
>
> Thanks,
> ferruh
>
> >
> > Best regards,
> > Igor
> >
> > On Sat, Jan 5, 2019 at 7:55 PM Igor Ryzhov <iryzhov@nfware.com
> > <mailto:iryzhov@nfware.com>> wrote:
> >
> >     Hi Ferruh,
> >
> >     I answered in another thread.
> >
> >     Regarding this patch – I have no objections now.
> >
> >     Best regards,
> >     Igor
> >
> >     On Tue, Dec 18, 2018 at 9:17 PM Ferruh Yigit <ferruh.yigit@intel.com
> >     <mailto:ferruh.yigit@intel.com>> wrote:
> >
> >         On 12/18/2018 9:20 AM, Ferruh Yigit wrote:
> >         > On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
> >         >> Hi Ferruh,
> >         >>
> >         >> Please, look at my patch http://patches.dpdk.org/patch/48454/
> and
> >         consider
> >         >> rebasing your patch over mine.
> >         >
> >         > Sorry about that, yes I will check it today.
> >
> >         Hi Igor,
> >
> >         I put some comments on your patch.
> >
> >         As far as I can see it also has a target to remove current type
> of ethtool
> >         support, so this RFC should not be a concern to you.
> >         All ethtool support can be removed, when you have an actual
> solution for
> >         driver
> >         independent ethtool support only a little code needs to be added
> back.
> >
> >         Thanks,
> >         ferruh
> >
> >         >
> >         >>
> >         >> As we discussed with Stephen, KNI needs to supply ethtool_ops
> with
> >         >> .get_link function, to properly support link status.
> >         >> So we should save ethtool_ops and implement .get_link using
> standard
> >         >> ethtool_op_get_link.
> >         >>
> >         >> Best regards,
> >         >> Igor
> >         >
> >         >
> >
>
>
Ferruh Yigit Feb. 18, 2019, 1:18 p.m. | #8
On 2/18/2019 1:07 PM, Igor Ryzhov wrote:
> Hi Ferruh,
> 
> Thanks. Should I be a maintainer to ack the patch?

No, everyone can (n)ack a patch, though maintainers have more weight.

> 
> Best regards,
> Igor
> 
> On Mon, Feb 18, 2019 at 3:33 PM Ferruh Yigit <ferruh.yigit@intel.com
> <mailto:ferruh.yigit@intel.com>> wrote:
> 
>     On 2/6/2019 1:12 PM, Igor Ryzhov wrote:
>     > Hi Ferruh,
>     >
>     > What's the plan with this patch?
> 
>     Hi Igor,
> 
>     I just sent a deprecation notice for this:
>     https://patches.dpdk.org/patch/50347/
> 
>     If the deprecation notice approved, requires 3 acks, note will go into 19.05
>     And later this patch can go in 19.08
> 
>     Thanks,
>     ferruh
> 
>     >
>     > Best regards,
>     > Igor
>     >
>     > On Sat, Jan 5, 2019 at 7:55 PM Igor Ryzhov <iryzhov@nfware.com
>     <mailto:iryzhov@nfware.com>
>     > <mailto:iryzhov@nfware.com <mailto:iryzhov@nfware.com>>> wrote:
>     >
>     >     Hi Ferruh,
>     >
>     >     I answered in another thread.
>     >
>     >     Regarding this patch – I have no objections now.
>     >
>     >     Best regards,
>     >     Igor
>     >
>     >     On Tue, Dec 18, 2018 at 9:17 PM Ferruh Yigit <ferruh.yigit@intel.com
>     <mailto:ferruh.yigit@intel.com>
>     >     <mailto:ferruh.yigit@intel.com <mailto:ferruh.yigit@intel.com>>> wrote:
>     >
>     >         On 12/18/2018 9:20 AM, Ferruh Yigit wrote:
>     >         > On 12/18/2018 8:20 AM, Igor Ryzhov wrote:
>     >         >> Hi Ferruh,
>     >         >>
>     >         >> Please, look at my patch http://patches.dpdk.org/patch/48454/ and
>     >         consider
>     >         >> rebasing your patch over mine.
>     >         >
>     >         > Sorry about that, yes I will check it today.
>     >
>     >         Hi Igor,
>     >
>     >         I put some comments on your patch.
>     >
>     >         As far as I can see it also has a target to remove current type of
>     ethtool
>     >         support, so this RFC should not be a concern to you.
>     >         All ethtool support can be removed, when you have an actual
>     solution for
>     >         driver
>     >         independent ethtool support only a little code needs to be added back.
>     >
>     >         Thanks,
>     >         ferruh
>     >
>     >         >
>     >         >>
>     >         >> As we discussed with Stephen, KNI needs to supply ethtool_ops with
>     >         >> .get_link function, to properly support link status.
>     >         >> So we should save ethtool_ops and implement .get_link using
>     standard
>     >         >> ethtool_op_get_link.
>     >         >>
>     >         >> Best regards,
>     >         >> Igor
>     >         >
>     >         >
>     >
>

Patch

diff --git a/config/common_base b/config/common_base
index d12ae98bc..8c1a330e0 100644
--- a/config/common_base
+++ b/config/common_base
@@ -890,7 +890,6 @@  CONFIG_RTE_PIPELINE_STATS_COLLECT=n
 CONFIG_RTE_LIBRTE_KNI=n
 CONFIG_RTE_LIBRTE_PMD_KNI=n
 CONFIG_RTE_KNI_KMOD=n
-CONFIG_RTE_KNI_KMOD_ETHTOOL=n
 CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
 
 #
diff --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst b/doc/guides/sample_app_ug/kernel_nic_interface.rst
index 6acdf0fff..2d07ff241 100644
--- a/doc/guides/sample_app_ug/kernel_nic_interface.rst
+++ b/doc/guides/sample_app_ug/kernel_nic_interface.rst
@@ -262,16 +262,6 @@  Change the MTU size:
 
     # ifconfig vEth0_0 mtu 1450
 
-If DPDK is compiled with ``CONFIG_RTE_KNI_KMOD_ETHTOOL=y`` and an Intel
-NIC is used, the user can use ``ethtool`` on the KNI interface as if it
-were a normal Linux kernel interface.
-
-Displaying the NIC registers:
-
-.. code-block:: console
-
-    # ethtool -d vEth0_0
-
 When the ``kni`` application is closed, all the KNI interfaces are deleted
 from the Linux kernel.
 
diff --git a/examples/kni/main.c b/examples/kni/main.c
index e37b1ad36..c468ffd19 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -885,19 +885,10 @@  kni_alloc(uint16_t port_id)
 		if (i == 0) {
 			struct rte_kni_ops ops;
 			struct rte_eth_dev_info dev_info;
-			const struct rte_pci_device *pci_dev;
-			const struct rte_bus *bus = NULL;
 
 			memset(&dev_info, 0, sizeof(dev_info));
 			rte_eth_dev_info_get(port_id, &dev_info);
 
-			if (dev_info.device)
-				bus = rte_bus_find_by_device(dev_info.device);
-			if (bus && !strcmp(bus->name, "pci")) {
-				pci_dev = RTE_DEV_TO_PCI(dev_info.device);
-				conf.addr = pci_dev->addr;
-				conf.id = pci_dev->id;
-			}
 			/* Get the interface default mac address */
 			rte_eth_macaddr_get(port_id,
 					(struct ether_addr *)&conf.mac_addr);
diff --git a/kernel/linux/kni/Kbuild b/kernel/linux/kni/Kbuild
index de5c27f32..e5452d6c0 100644
--- a/kernel/linux/kni/Kbuild
+++ b/kernel/linux/kni/Kbuild
@@ -3,6 +3,4 @@ 
 
 ccflags-y := $(MODULE_CFLAGS)
 obj-m := rte_kni.o
-rte_kni-y := $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/*.c)) \
- $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/ethtool/ixgbe/*.c)) \
- $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/ethtool/igb/*.c))
+rte_kni-y := $(patsubst $(src)/%.c,%.o,$(wildcard $(src)/*.c))
diff --git a/kernel/linux/kni/Makefile b/kernel/linux/kni/Makefile
index 282be7b68..595bac261 100644
--- a/kernel/linux/kni/Makefile
+++ b/kernel/linux/kni/Makefile
@@ -12,7 +12,7 @@  MODULE = rte_kni
 # CFLAGS
 #
 MODULE_CFLAGS += -I$(SRCDIR) --param max-inline-insns-single=50
-MODULE_CFLAGS += -I$(RTE_OUTPUT)/include -I$(SRCDIR)/ethtool/ixgbe -I$(SRCDIR)/ethtool/igb
+MODULE_CFLAGS += -I$(RTE_OUTPUT)/include
 MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h
 MODULE_CFLAGS += -Wall -Werror
 
@@ -30,29 +30,5 @@  endif
 #
 SRCS-y := kni_misc.c
 SRCS-y += kni_net.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += kni_ethtool.c
-
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_main.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_api.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_common.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_ethtool.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82599.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82598.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_x540.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_phy.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/kcompat.c
-
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_82575.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_i210.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_api.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mac.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_manage.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mbx.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_nvm.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_phy.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_ethtool.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_main.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_param.c
-SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_vmdq.c
 
 include $(RTE_SDK)/mk/rte.module.mk
diff --git a/kernel/linux/kni/ethtool/README b/kernel/linux/kni/ethtool/README
deleted file mode 100644
index af36738ad..000000000
--- a/kernel/linux/kni/ethtool/README
+++ /dev/null
@@ -1,71 +0,0 @@ 
-..  SPDX-License-Identifier: BSD-3-Clause
-    Copyright(c) 2010-2014 Intel Corporation.
-
-Description
-
-In order to support ethtool in Kernel NIC Interface, the standard Linux kernel
-drivers of ixgbe/igb are needed to be reused here. ixgbe-3.9.17 is the version
-modified from in kernel NIC interface kernel module to support ixgbe NIC, and
-igb-3.4.8 is the version modified from in kernel NIC interface kernel module to
-support igb NIC.
-
-The source code package of ixgbe can be downloaded from sourceforge.net as below.
-http://sourceforge.net/projects/e1000/files/ixgbe%20stable/
-Below source files are copied or modified from ixgbe.
-
-ixgbe_82598.h
-ixgbe_82599.c
-ixgbe_82599.h
-ixgbe_api.c
-ixgbe_api.h
-ixgbe_common.c
-ixgbe_common.h
-ixgbe_dcb.h
-ixgbe_ethtool.c
-ixgbe_fcoe.h
-ixgbe.h
-ixgbe_main.c
-ixgbe_mbx.h
-ixgbe_osdep.h
-ixgbe_phy.c
-ixgbe_phy.h
-ixgbe_sriov.h
-ixgbe_type.h
-kcompat.c
-kcompat.h
-
-The source code package of igb can be downloaded from sourceforge.net as below.
-http://sourceforge.net/projects/e1000/files/igb%20stable/
-Below source files are copied or modified from igb.
-
-e1000_82575.c
-e1000_82575.h
-e1000_api.c
-e1000_api.h
-e1000_defines.h
-e1000_hw.h
-e1000_mac.c
-e1000_mac.h
-e1000_manage.c
-e1000_manage.h
-e1000_mbx.c
-e1000_mbx.h
-e1000_nvm.c
-e1000_nvm.h
-e1000_osdep.h
-e1000_phy.c
-e1000_phy.h
-e1000_regs.h
-igb_ethtool.c
-igb.h
-igb_main.c
-igb_param.c
-igb_procfs.c
-igb_regtest.h
-igb_sysfs.c
-igb_vmdq.c
-igb_vmdq.h
-kcompat.c
-kcompat_ethtool.c
-kcompat.h
-
diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.c b/kernel/linux/kni/ethtool/igb/e1000_82575.c
deleted file mode 100644
index 98346709d..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_82575.c
+++ /dev/null
@@ -1,3650 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/*
- * 82575EB Gigabit Network Connection
- * 82575EB Gigabit Backplane Connection
- * 82575GB Gigabit Network Connection
- * 82576 Gigabit Network Connection
- * 82576 Quad Port Gigabit Mezzanine Adapter
- * 82580 Gigabit Network Connection
- * I350 Gigabit Network Connection
- */
-
-#include "e1000_api.h"
-#include "e1000_i210.h"
-
-static s32  e1000_init_phy_params_82575(struct e1000_hw *hw);
-static s32  e1000_init_mac_params_82575(struct e1000_hw *hw);
-static s32  e1000_acquire_phy_82575(struct e1000_hw *hw);
-static void e1000_release_phy_82575(struct e1000_hw *hw);
-static s32  e1000_acquire_nvm_82575(struct e1000_hw *hw);
-static void e1000_release_nvm_82575(struct e1000_hw *hw);
-static s32  e1000_check_for_link_82575(struct e1000_hw *hw);
-static s32  e1000_check_for_link_media_swap(struct e1000_hw *hw);
-static s32  e1000_get_cfg_done_82575(struct e1000_hw *hw);
-static s32  e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
-					 u16 *duplex);
-static s32  e1000_init_hw_82575(struct e1000_hw *hw);
-static s32  e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw);
-static s32  e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
-					   u16 *data);
-static s32  e1000_reset_hw_82575(struct e1000_hw *hw);
-static s32  e1000_reset_hw_82580(struct e1000_hw *hw);
-static s32  e1000_read_phy_reg_82580(struct e1000_hw *hw,
-				     u32 offset, u16 *data);
-static s32  e1000_write_phy_reg_82580(struct e1000_hw *hw,
-				      u32 offset, u16 data);
-static s32  e1000_set_d0_lplu_state_82580(struct e1000_hw *hw,
-					  bool active);
-static s32  e1000_set_d3_lplu_state_82580(struct e1000_hw *hw,
-					  bool active);
-static s32  e1000_set_d0_lplu_state_82575(struct e1000_hw *hw,
-					  bool active);
-static s32  e1000_setup_copper_link_82575(struct e1000_hw *hw);
-static s32  e1000_setup_serdes_link_82575(struct e1000_hw *hw);
-static s32  e1000_get_media_type_82575(struct e1000_hw *hw);
-static s32  e1000_set_sfp_media_type_82575(struct e1000_hw *hw);
-static s32  e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data);
-static s32  e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw,
-					    u32 offset, u16 data);
-static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw);
-static s32  e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
-static s32  e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw,
-						 u16 *speed, u16 *duplex);
-static s32  e1000_get_phy_id_82575(struct e1000_hw *hw);
-static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask);
-static bool e1000_sgmii_active_82575(struct e1000_hw *hw);
-static s32  e1000_reset_init_script_82575(struct e1000_hw *hw);
-static s32  e1000_read_mac_addr_82575(struct e1000_hw *hw);
-static void e1000_config_collision_dist_82575(struct e1000_hw *hw);
-static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw);
-static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw);
-static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw);
-static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw);
-static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw);
-static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw);
-static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw);
-static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw,
-						 u16 offset);
-static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
-						   u16 offset);
-static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw);
-static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw);
-static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value);
-static void e1000_clear_vfta_i350(struct e1000_hw *hw);
-
-static void e1000_i2c_start(struct e1000_hw *hw);
-static void e1000_i2c_stop(struct e1000_hw *hw);
-static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data);
-static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data);
-static s32 e1000_get_i2c_ack(struct e1000_hw *hw);
-static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data);
-static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data);
-static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl);
-static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl);
-static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data);
-static bool e1000_get_i2c_data(u32 *i2cctl);
-
-static const u16 e1000_82580_rxpbs_table[] = {
-	36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 };
-#define E1000_82580_RXPBS_TABLE_SIZE \
-	(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
-
-
-/**
- *  e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
- *  @hw: pointer to the HW structure
- *
- *  Called to determine if the I2C pins are being used for I2C or as an
- *  external MDIO interface since the two options are mutually exclusive.
- **/
-static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw)
-{
-	u32 reg = 0;
-	bool ext_mdio = false;
-
-	DEBUGFUNC("e1000_sgmii_uses_mdio_82575");
-
-	switch (hw->mac.type) {
-	case e1000_82575:
-	case e1000_82576:
-		reg = E1000_READ_REG(hw, E1000_MDIC);
-		ext_mdio = !!(reg & E1000_MDIC_DEST);
-		break;
-	case e1000_82580:
-	case e1000_i350:
-	case e1000_i354:
-	case e1000_i210:
-	case e1000_i211:
-		reg = E1000_READ_REG(hw, E1000_MDICNFG);
-		ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
-		break;
-	default:
-		break;
-	}
-	return ext_mdio;
-}
-
-/**
- *  e1000_init_phy_params_82575 - Init PHY func ptrs.
- *  @hw: pointer to the HW structure
- **/
-static s32 e1000_init_phy_params_82575(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u32 ctrl_ext;
-
-	DEBUGFUNC("e1000_init_phy_params_82575");
-
-	phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic;
-	phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic;
-
-	if (hw->phy.media_type != e1000_media_type_copper) {
-		phy->type = e1000_phy_none;
-		goto out;
-	}
-
-	phy->ops.power_up   = e1000_power_up_phy_copper;
-	phy->ops.power_down = e1000_power_down_phy_copper_82575;
-
-	phy->autoneg_mask	= AUTONEG_ADVERTISE_SPEED_DEFAULT;
-	phy->reset_delay_us	= 100;
-
-	phy->ops.acquire	= e1000_acquire_phy_82575;
-	phy->ops.check_reset_block = e1000_check_reset_block_generic;
-	phy->ops.commit		= e1000_phy_sw_reset_generic;
-	phy->ops.get_cfg_done	= e1000_get_cfg_done_82575;
-	phy->ops.release	= e1000_release_phy_82575;
-
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-
-	if (e1000_sgmii_active_82575(hw)) {
-		phy->ops.reset = e1000_phy_hw_reset_sgmii_82575;
-		ctrl_ext |= E1000_CTRL_I2C_ENA;
-	} else {
-		phy->ops.reset = e1000_phy_hw_reset_generic;
-		ctrl_ext &= ~E1000_CTRL_I2C_ENA;
-	}
-
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-	e1000_reset_mdicnfg_82580(hw);
-
-	if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) {
-		phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575;
-		phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575;
-	} else {
-		switch (hw->mac.type) {
-		case e1000_82580:
-		case e1000_i350:
-		case e1000_i354:
-			phy->ops.read_reg = e1000_read_phy_reg_82580;
-			phy->ops.write_reg = e1000_write_phy_reg_82580;
-			break;
-		case e1000_i210:
-		case e1000_i211:
-			phy->ops.read_reg = e1000_read_phy_reg_gs40g;
-			phy->ops.write_reg = e1000_write_phy_reg_gs40g;
-			break;
-		default:
-			phy->ops.read_reg = e1000_read_phy_reg_igp;
-			phy->ops.write_reg = e1000_write_phy_reg_igp;
-		}
-	}
-
-	/* Set phy->phy_addr and phy->id. */
-	ret_val = e1000_get_phy_id_82575(hw);
-
-	/* Verify phy id and set remaining function pointers */
-	switch (phy->id) {
-	case M88E1543_E_PHY_ID:
-	case I347AT4_E_PHY_ID:
-	case M88E1112_E_PHY_ID:
-	case M88E1340M_E_PHY_ID:
-	case M88E1111_I_PHY_ID:
-		phy->type		= e1000_phy_m88;
-		phy->ops.check_polarity	= e1000_check_polarity_m88;
-		phy->ops.get_info	= e1000_get_phy_info_m88;
-		if (phy->id == I347AT4_E_PHY_ID ||
-		    phy->id == M88E1112_E_PHY_ID ||
-		    phy->id == M88E1340M_E_PHY_ID)
-			phy->ops.get_cable_length =
-					 e1000_get_cable_length_m88_gen2;
-		else if (phy->id == M88E1543_E_PHY_ID)
-			phy->ops.get_cable_length =
-					 e1000_get_cable_length_m88_gen2;
-		else
-			phy->ops.get_cable_length = e1000_get_cable_length_m88;
-		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
-		/* Check if this PHY is configured for media swap. */
-		if (phy->id == M88E1112_E_PHY_ID) {
-			u16 data;
-
-			ret_val = phy->ops.write_reg(hw,
-						     E1000_M88E1112_PAGE_ADDR,
-						     2);
-			if (ret_val)
-				goto out;
-
-			ret_val = phy->ops.read_reg(hw,
-						    E1000_M88E1112_MAC_CTRL_1,
-						    &data);
-			if (ret_val)
-				goto out;
-
-			data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >>
-			       E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT;
-			if (data == E1000_M88E1112_AUTO_COPPER_SGMII ||
-			    data == E1000_M88E1112_AUTO_COPPER_BASEX)
-				hw->mac.ops.check_for_link =
-						e1000_check_for_link_media_swap;
-		}
-		break;
-	case IGP03E1000_E_PHY_ID:
-	case IGP04E1000_E_PHY_ID:
-		phy->type = e1000_phy_igp_3;
-		phy->ops.check_polarity = e1000_check_polarity_igp;
-		phy->ops.get_info = e1000_get_phy_info_igp;
-		phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
-		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp;
-		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575;
-		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic;
-		break;
-	case I82580_I_PHY_ID:
-	case I350_I_PHY_ID:
-		phy->type = e1000_phy_82580;
-		phy->ops.check_polarity = e1000_check_polarity_82577;
-		phy->ops.force_speed_duplex =
-					 e1000_phy_force_speed_duplex_82577;
-		phy->ops.get_cable_length = e1000_get_cable_length_82577;
-		phy->ops.get_info = e1000_get_phy_info_82577;
-		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580;
-		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580;
-		break;
-	case I210_I_PHY_ID:
-		phy->type		= e1000_phy_i210;
-		phy->ops.check_polarity	= e1000_check_polarity_m88;
-		phy->ops.get_info	= e1000_get_phy_info_m88;
-		phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2;
-		phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580;
-		phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580;
-		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
-		break;
-	default:
-		ret_val = -E1000_ERR_PHY;
-		goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_init_nvm_params_82575 - Init NVM func ptrs.
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_init_nvm_params_82575(struct e1000_hw *hw)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-	u16 size;
-
-	DEBUGFUNC("e1000_init_nvm_params_82575");
-
-	size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
-		     E1000_EECD_SIZE_EX_SHIFT);
-	/*
-	 * Added to a constant, "size" becomes the left-shift value
-	 * for setting word_size.
-	 */
-	size += NVM_WORD_SIZE_BASE_SHIFT;
-
-	/* Just in case size is out of range, cap it to the largest
-	 * EEPROM size supported
-	 */
-	if (size > 15)
-		size = 15;
-
-	nvm->word_size = 1 << size;
-	if (hw->mac.type < e1000_i210) {
-		nvm->opcode_bits = 8;
-		nvm->delay_usec = 1;
-
-		switch (nvm->override) {
-		case e1000_nvm_override_spi_large:
-			nvm->page_size = 32;
-			nvm->address_bits = 16;
-			break;
-		case e1000_nvm_override_spi_small:
-			nvm->page_size = 8;
-			nvm->address_bits = 8;
-			break;
-		default:
-			nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
-			nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ?
-					    16 : 8;
-			break;
-		}
-		if (nvm->word_size == (1 << 15))
-			nvm->page_size = 128;
-
-		nvm->type = e1000_nvm_eeprom_spi;
-	} else {
-		nvm->type = e1000_nvm_flash_hw;
-	}
-
-	/* Function Pointers */
-	nvm->ops.acquire = e1000_acquire_nvm_82575;
-	nvm->ops.release = e1000_release_nvm_82575;
-	if (nvm->word_size < (1 << 15))
-		nvm->ops.read = e1000_read_nvm_eerd;
-	else
-		nvm->ops.read = e1000_read_nvm_spi;
-
-	nvm->ops.write = e1000_write_nvm_spi;
-	nvm->ops.validate = e1000_validate_nvm_checksum_generic;
-	nvm->ops.update = e1000_update_nvm_checksum_generic;
-	nvm->ops.valid_led_default = e1000_valid_led_default_82575;
-
-	/* override generic family function pointers for specific descendants */
-	switch (hw->mac.type) {
-	case e1000_82580:
-		nvm->ops.validate = e1000_validate_nvm_checksum_82580;
-		nvm->ops.update = e1000_update_nvm_checksum_82580;
-		break;
-	case e1000_i350:
-	//case e1000_i354:
-		nvm->ops.validate = e1000_validate_nvm_checksum_i350;
-		nvm->ops.update = e1000_update_nvm_checksum_i350;
-		break;
-	default:
-		break;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_init_mac_params_82575 - Init MAC func ptrs.
- *  @hw: pointer to the HW structure
- **/
-static s32 e1000_init_mac_params_82575(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
-
-	DEBUGFUNC("e1000_init_mac_params_82575");
-
-	/* Derives media type */
-	e1000_get_media_type_82575(hw);
-	/* Set mta register count */
-	mac->mta_reg_count = 128;
-	/* Set uta register count */
-	mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128;
-	/* Set rar entry count */
-	mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
-	if (mac->type == e1000_82576)
-		mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
-	if (mac->type == e1000_82580)
-		mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
-	if (mac->type == e1000_i350 || mac->type == e1000_i354)
-		mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
-
-	/* Enable EEE default settings for EEE supported devices */
-	if (mac->type >= e1000_i350)
-		dev_spec->eee_disable = false;
-
-	/* Allow a single clear of the SW semaphore on I210 and newer */
-	if (mac->type >= e1000_i210)
-		dev_spec->clear_semaphore_once = true;
-
-	/* Set if part includes ASF firmware */
-	mac->asf_firmware_present = true;
-	/* FWSM register */
-	mac->has_fwsm = true;
-	/* ARC supported; valid only if manageability features are enabled. */
-	mac->arc_subsystem_valid =
-		!!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK);
-
-	/* Function pointers */
-
-	/* bus type/speed/width */
-	mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic;
-	/* reset */
-	if (mac->type >= e1000_82580)
-		mac->ops.reset_hw = e1000_reset_hw_82580;
-	else
-	mac->ops.reset_hw = e1000_reset_hw_82575;
-	/* hw initialization */
-	mac->ops.init_hw = e1000_init_hw_82575;
-	/* link setup */
-	mac->ops.setup_link = e1000_setup_link_generic;
-	/* physical interface link setup */
-	mac->ops.setup_physical_interface =
-		(hw->phy.media_type == e1000_media_type_copper)
-		? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575;
-	/* physical interface shutdown */
-	mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575;
-	/* physical interface power up */
-	mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575;
-	/* check for link */
-	mac->ops.check_for_link = e1000_check_for_link_82575;
-	/* read mac address */
-	mac->ops.read_mac_addr = e1000_read_mac_addr_82575;
-	/* configure collision distance */
-	mac->ops.config_collision_dist = e1000_config_collision_dist_82575;
-	/* multicast address update */
-	mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic;
-	if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) {
-		/* writing VFTA */
-		mac->ops.write_vfta = e1000_write_vfta_i350;
-		/* clearing VFTA */
-		mac->ops.clear_vfta = e1000_clear_vfta_i350;
-	} else {
-		/* writing VFTA */
-		mac->ops.write_vfta = e1000_write_vfta_generic;
-		/* clearing VFTA */
-		mac->ops.clear_vfta = e1000_clear_vfta_generic;
-	}
-	if (hw->mac.type >= e1000_82580)
-		mac->ops.validate_mdi_setting =
-				e1000_validate_mdi_setting_crossover_generic;
-	/* ID LED init */
-	mac->ops.id_led_init = e1000_id_led_init_generic;
-	/* blink LED */
-	mac->ops.blink_led = e1000_blink_led_generic;
-	/* setup LED */
-	mac->ops.setup_led = e1000_setup_led_generic;
-	/* cleanup LED */
-	mac->ops.cleanup_led = e1000_cleanup_led_generic;
-	/* turn on/off LED */
-	mac->ops.led_on = e1000_led_on_generic;
-	mac->ops.led_off = e1000_led_off_generic;
-	/* clear hardware counters */
-	mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575;
-	/* link info */
-	mac->ops.get_link_up_info = e1000_get_link_up_info_82575;
-	/* get thermal sensor data */
-	mac->ops.get_thermal_sensor_data =
-				e1000_get_thermal_sensor_data_generic;
-	mac->ops.init_thermal_sensor_thresh =
-				e1000_init_thermal_sensor_thresh_generic;
-	/* acquire SW_FW sync */
-	mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575;
-	mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575;
-	if (mac->type >= e1000_i210) {
-		mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210;
-		mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210;
-	}
-
-	/* set lan id for port to determine which phy lock to use */
-	hw->mac.ops.set_lan_id(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_init_function_pointers_82575 - Init func ptrs.
- *  @hw: pointer to the HW structure
- *
- *  Called to initialize all function pointers and parameters.
- **/
-void e1000_init_function_pointers_82575(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_init_function_pointers_82575");
-
-	hw->mac.ops.init_params = e1000_init_mac_params_82575;
-	hw->nvm.ops.init_params = e1000_init_nvm_params_82575;
-	hw->phy.ops.init_params = e1000_init_phy_params_82575;
-	hw->mbx.ops.init_params = e1000_init_mbx_params_pf;
-}
-
-/**
- *  e1000_acquire_phy_82575 - Acquire rights to access PHY
- *  @hw: pointer to the HW structure
- *
- *  Acquire access rights to the correct PHY.
- **/
-static s32 e1000_acquire_phy_82575(struct e1000_hw *hw)
-{
-	u16 mask = E1000_SWFW_PHY0_SM;
-
-	DEBUGFUNC("e1000_acquire_phy_82575");
-
-	if (hw->bus.func == E1000_FUNC_1)
-		mask = E1000_SWFW_PHY1_SM;
-	else if (hw->bus.func == E1000_FUNC_2)
-		mask = E1000_SWFW_PHY2_SM;
-	else if (hw->bus.func == E1000_FUNC_3)
-		mask = E1000_SWFW_PHY3_SM;
-
-	return hw->mac.ops.acquire_swfw_sync(hw, mask);
-}
-
-/**
- *  e1000_release_phy_82575 - Release rights to access PHY
- *  @hw: pointer to the HW structure
- *
- *  A wrapper to release access rights to the correct PHY.
- **/
-static void e1000_release_phy_82575(struct e1000_hw *hw)
-{
-	u16 mask = E1000_SWFW_PHY0_SM;
-
-	DEBUGFUNC("e1000_release_phy_82575");
-
-	if (hw->bus.func == E1000_FUNC_1)
-		mask = E1000_SWFW_PHY1_SM;
-	else if (hw->bus.func == E1000_FUNC_2)
-		mask = E1000_SWFW_PHY2_SM;
-	else if (hw->bus.func == E1000_FUNC_3)
-		mask = E1000_SWFW_PHY3_SM;
-
-	hw->mac.ops.release_swfw_sync(hw, mask);
-}
-
-/**
- *  e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Reads the PHY register at offset using the serial gigabit media independent
- *  interface and stores the retrieved information in data.
- **/
-static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
-					  u16 *data)
-{
-	s32 ret_val = -E1000_ERR_PARAM;
-
-	DEBUGFUNC("e1000_read_phy_reg_sgmii_82575");
-
-	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
-		DEBUGOUT1("PHY Address %u is out of range\n", offset);
-		goto out;
-	}
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000_read_phy_reg_i2c(hw, offset, data);
-
-	hw->phy.ops.release(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Writes the data to PHY register at the offset using the serial gigabit
- *  media independent interface.
- **/
-static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
-					   u16 data)
-{
-	s32 ret_val = -E1000_ERR_PARAM;
-
-	DEBUGFUNC("e1000_write_phy_reg_sgmii_82575");
-
-	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
-		DEBUGOUT1("PHY Address %d is out of range\n", offset);
-		goto out;
-	}
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000_write_phy_reg_i2c(hw, offset, data);
-
-	hw->phy.ops.release(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_get_phy_id_82575 - Retrieve PHY addr and id
- *  @hw: pointer to the HW structure
- *
- *  Retrieves the PHY address and ID for both PHY's which do and do not use
- *  sgmi interface.
- **/
-static s32 e1000_get_phy_id_82575(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32  ret_val = E1000_SUCCESS;
-	u16 phy_id;
-	u32 ctrl_ext;
-	u32 mdic;
-
-	DEBUGFUNC("e1000_get_phy_id_82575");
-
-	/* i354 devices can have a PHY that needs an extra read for id */
-	if (hw->mac.type == e1000_i354)
-		e1000_get_phy_id(hw);
-
-
-	/*
-	 * For SGMII PHYs, we try the list of possible addresses until
-	 * we find one that works.  For non-SGMII PHYs
-	 * (e.g. integrated copper PHYs), an address of 1 should
-	 * work.  The result of this function should mean phy->phy_addr
-	 * and phy->id are set correctly.
-	 */
-	if (!e1000_sgmii_active_82575(hw)) {
-		phy->addr = 1;
-		ret_val = e1000_get_phy_id(hw);
-		goto out;
-	}
-
-	if (e1000_sgmii_uses_mdio_82575(hw)) {
-		switch (hw->mac.type) {
-		case e1000_82575:
-		case e1000_82576:
-			mdic = E1000_READ_REG(hw, E1000_MDIC);
-			mdic &= E1000_MDIC_PHY_MASK;
-			phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
-			break;
-		case e1000_82580:
-		case e1000_i350:
-		case e1000_i354:
-		case e1000_i210:
-		case e1000_i211:
-			mdic = E1000_READ_REG(hw, E1000_MDICNFG);
-			mdic &= E1000_MDICNFG_PHY_MASK;
-			phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
-			break;
-		default:
-			ret_val = -E1000_ERR_PHY;
-			goto out;
-			break;
-		}
-		ret_val = e1000_get_phy_id(hw);
-		goto out;
-	}
-
-	/* Power on sgmii phy if it is disabled */
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT,
-			ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
-	E1000_WRITE_FLUSH(hw);
-	msec_delay(300);
-
-	/*
-	 * The address field in the I2CCMD register is 3 bits and 0 is invalid.
-	 * Therefore, we need to test 1-7
-	 */
-	for (phy->addr = 1; phy->addr < 8; phy->addr++) {
-		ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
-		if (ret_val == E1000_SUCCESS) {
-			DEBUGOUT2("Vendor ID 0x%08X read at address %u\n",
-				  phy_id, phy->addr);
-			/*
-			 * At the time of this writing, The M88 part is
-			 * the only supported SGMII PHY product.
-			 */
-			if (phy_id == M88_VENDOR)
-				break;
-		} else {
-			DEBUGOUT1("PHY address %u was unreadable\n",
-				  phy->addr);
-		}
-	}
-
-	/* A valid PHY type couldn't be found. */
-	if (phy->addr == 8) {
-		phy->addr = 0;
-		ret_val = -E1000_ERR_PHY;
-	} else {
-		ret_val = e1000_get_phy_id(hw);
-	}
-
-	/* restore previous sfp cage power state */
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset
- *  @hw: pointer to the HW structure
- *
- *  Resets the PHY using the serial gigabit media independent interface.
- **/
-static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575");
-
-	/*
-	 * This isn't a true "hard" reset, but is the only reset
-	 * available to us at this time.
-	 */
-
-	DEBUGOUT("Soft resetting SGMII attached PHY...\n");
-
-	if (!(hw->phy.ops.write_reg))
-		goto out;
-
-	/*
-	 * SFP documentation requires the following to configure the SPF module
-	 * to work on SGMII.  No further documentation is given.
-	 */
-	ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
-	if (ret_val)
-		goto out;
-
-	ret_val = hw->phy.ops.commit(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
- *  @hw: pointer to the HW structure
- *  @active: true to enable LPLU, false to disable
- *
- *  Sets the LPLU D0 state according to the active flag.  When
- *  activating LPLU this function also disables smart speed
- *  and vice versa.  LPLU will not be activated unless the
- *  device autonegotiation advertisement meets standards of
- *  either 10 or 10/100 or 10/100/1000 at all duplexes.
- *  This is a function pointer entry point only called by
- *  PHY setup routines.
- **/
-static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u16 data;
-
-	DEBUGFUNC("e1000_set_d0_lplu_state_82575");
-
-	if (!(hw->phy.ops.read_reg))
-		goto out;
-
-	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
-	if (ret_val)
-		goto out;
-
-	if (active) {
-		data |= IGP02E1000_PM_D0_LPLU;
-		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-					     data);
-		if (ret_val)
-			goto out;
-
-		/* When LPLU is enabled, we should disable SmartSpeed */
-		ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-					    &data);
-		data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-		ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
-					     data);
-		if (ret_val)
-			goto out;
-	} else {
-		data &= ~IGP02E1000_PM_D0_LPLU;
-		ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
-					     data);
-		/*
-		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
-		 * during Dx states where the power conservation is most
-		 * important.  During driver activity we should enable
-		 * SmartSpeed, so performance is maintained.
-		 */
-		if (phy->smart_speed == e1000_smart_speed_on) {
-			ret_val = phy->ops.read_reg(hw,
-						    IGP01E1000_PHY_PORT_CONFIG,
-						    &data);
-			if (ret_val)
-				goto out;
-
-			data |= IGP01E1000_PSCFR_SMART_SPEED;
-			ret_val = phy->ops.write_reg(hw,
-						     IGP01E1000_PHY_PORT_CONFIG,
-						     data);
-			if (ret_val)
-				goto out;
-		} else if (phy->smart_speed == e1000_smart_speed_off) {
-			ret_val = phy->ops.read_reg(hw,
-						    IGP01E1000_PHY_PORT_CONFIG,
-						    &data);
-			if (ret_val)
-				goto out;
-
-			data &= ~IGP01E1000_PSCFR_SMART_SPEED;
-			ret_val = phy->ops.write_reg(hw,
-						     IGP01E1000_PHY_PORT_CONFIG,
-						     data);
-			if (ret_val)
-				goto out;
-		}
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state
- *  @hw: pointer to the HW structure
- *  @active: true to enable LPLU, false to disable
- *
- *  Sets the LPLU D0 state according to the active flag.  When
- *  activating LPLU this function also disables smart speed
- *  and vice versa.  LPLU will not be activated unless the
- *  device autonegotiation advertisement meets standards of
- *  either 10 or 10/100 or 10/100/1000 at all duplexes.
- *  This is a function pointer entry point only called by
- *  PHY setup routines.
- **/
-static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u32 data;
-
-	DEBUGFUNC("e1000_set_d0_lplu_state_82580");
-
-	data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
-
-	if (active) {
-		data |= E1000_82580_PM_D0_LPLU;
-
-		/* When LPLU is enabled, we should disable SmartSpeed */
-		data &= ~E1000_82580_PM_SPD;
-	} else {
-		data &= ~E1000_82580_PM_D0_LPLU;
-
-		/*
-		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
-		 * during Dx states where the power conservation is most
-		 * important.  During driver activity we should enable
-		 * SmartSpeed, so performance is maintained.
-		 */
-		if (phy->smart_speed == e1000_smart_speed_on)
-			data |= E1000_82580_PM_SPD;
-		else if (phy->smart_speed == e1000_smart_speed_off)
-			data &= ~E1000_82580_PM_SPD;
-	}
-
-	E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data);
-	return ret_val;
-}
-
-/**
- *  e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3
- *  @hw: pointer to the HW structure
- *  @active: boolean used to enable/disable lplu
- *
- *  Success returns 0, Failure returns 1
- *
- *  The low power link up (lplu) state is set to the power management level D3
- *  and SmartSpeed is disabled when active is true, else clear lplu for D3
- *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
- *  is used during Dx states where the power conservation is most important.
- *  During driver activity, SmartSpeed should be enabled so performance is
- *  maintained.
- **/
-s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u32 data;
-
-	DEBUGFUNC("e1000_set_d3_lplu_state_82580");
-
-	data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
-
-	if (!active) {
-		data &= ~E1000_82580_PM_D3_LPLU;
-		/*
-		 * LPLU and SmartSpeed are mutually exclusive.  LPLU is used
-		 * during Dx states where the power conservation is most
-		 * important.  During driver activity we should enable
-		 * SmartSpeed, so performance is maintained.
-		 */
-		if (phy->smart_speed == e1000_smart_speed_on)
-			data |= E1000_82580_PM_SPD;
-		else if (phy->smart_speed == e1000_smart_speed_off)
-			data &= ~E1000_82580_PM_SPD;
-	} else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
-		   (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
-		   (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
-		data |= E1000_82580_PM_D3_LPLU;
-		/* When LPLU is enabled, we should disable SmartSpeed */
-		data &= ~E1000_82580_PM_SPD;
-	}
-
-	E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data);
-	return ret_val;
-}
-
-/**
- *  e1000_acquire_nvm_82575 - Request for access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Acquire the necessary semaphores for exclusive access to the EEPROM.
- *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
- *  Return successful if access grant bit set, else clear the request for
- *  EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_acquire_nvm_82575");
-
-	ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
-	if (ret_val)
-		goto out;
-
-	/*
-	 * Check if there is some access
-	 * error this access may hook on
-	 */
-	if (hw->mac.type == e1000_i350) {
-		u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-		if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT |
-		    E1000_EECD_TIMEOUT)) {
-			/* Clear all access error flags */
-			E1000_WRITE_REG(hw, E1000_EECD, eecd |
-					E1000_EECD_ERROR_CLR);
-			DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
-		}
-	}
-	if (hw->mac.type == e1000_82580) {
-		u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-		if (eecd & E1000_EECD_BLOCKED) {
-			/* Clear access error flag */
-			E1000_WRITE_REG(hw, E1000_EECD, eecd |
-					E1000_EECD_BLOCKED);
-			DEBUGOUT("Nvm bit banging access error detected and cleared.\n");
-		}
-	}
-
-
-	ret_val = e1000_acquire_nvm_generic(hw);
-	if (ret_val)
-		e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_release_nvm_82575 - Release exclusive access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Stop any current commands to the EEPROM and clear the EEPROM request bit,
- *  then release the semaphores acquired.
- **/
-static void e1000_release_nvm_82575(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_release_nvm_82575");
-
-	e1000_release_nvm_generic(hw);
-
-	e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
-}
-
-/**
- *  e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
- *  @hw: pointer to the HW structure
- *  @mask: specifies which semaphore to acquire
- *
- *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
- *  will also specify which port we're acquiring the lock for.
- **/
-static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
-{
-	u32 swfw_sync;
-	u32 swmask = mask;
-	u32 fwmask = mask << 16;
-	s32 ret_val = E1000_SUCCESS;
-	s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
-
-	DEBUGFUNC("e1000_acquire_swfw_sync_82575");
-
-	while (i < timeout) {
-		if (e1000_get_hw_semaphore_generic(hw)) {
-			ret_val = -E1000_ERR_SWFW_SYNC;
-			goto out;
-		}
-
-		swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
-		if (!(swfw_sync & (fwmask | swmask)))
-			break;
-
-		/*
-		 * Firmware currently using resource (fwmask)
-		 * or other software thread using resource (swmask)
-		 */
-		e1000_put_hw_semaphore_generic(hw);
-		msec_delay_irq(5);
-		i++;
-	}
-
-	if (i == timeout) {
-		DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
-		ret_val = -E1000_ERR_SWFW_SYNC;
-		goto out;
-	}
-
-	swfw_sync |= swmask;
-	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
-
-	e1000_put_hw_semaphore_generic(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_release_swfw_sync_82575 - Release SW/FW semaphore
- *  @hw: pointer to the HW structure
- *  @mask: specifies which semaphore to acquire
- *
- *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
- *  will also specify which port we're releasing the lock for.
- **/
-static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
-{
-	u32 swfw_sync;
-
-	DEBUGFUNC("e1000_release_swfw_sync_82575");
-
-	while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS)
-		; /* Empty */
-
-	swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
-	swfw_sync &= ~mask;
-	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
-
-	e1000_put_hw_semaphore_generic(hw);
-}
-
-/**
- *  e1000_get_cfg_done_82575 - Read config done bit
- *  @hw: pointer to the HW structure
- *
- *  Read the management control register for the config done bit for
- *  completion status.  NOTE: silicon which is EEPROM-less will fail trying
- *  to read the config done bit, so an error is *ONLY* logged and returns
- *  E1000_SUCCESS.  If we were to return with error, EEPROM-less silicon
- *  would not be able to be reset or change link.
- **/
-static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw)
-{
-	s32 timeout = PHY_CFG_TIMEOUT;
-	s32 ret_val = E1000_SUCCESS;
-	u32 mask = E1000_NVM_CFG_DONE_PORT_0;
-
-	DEBUGFUNC("e1000_get_cfg_done_82575");
-
-	if (hw->bus.func == E1000_FUNC_1)
-		mask = E1000_NVM_CFG_DONE_PORT_1;
-	else if (hw->bus.func == E1000_FUNC_2)
-		mask = E1000_NVM_CFG_DONE_PORT_2;
-	else if (hw->bus.func == E1000_FUNC_3)
-		mask = E1000_NVM_CFG_DONE_PORT_3;
-	while (timeout) {
-		if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask)
-			break;
-		msec_delay(1);
-		timeout--;
-	}
-	if (!timeout)
-		DEBUGOUT("MNG configuration cycle has not completed.\n");
-
-	/* If EEPROM is not marked present, init the PHY manually */
-	if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) &&
-	    (hw->phy.type == e1000_phy_igp_3))
-		e1000_phy_init_script_igp3(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_get_link_up_info_82575 - Get link speed/duplex info
- *  @hw: pointer to the HW structure
- *  @speed: stores the current speed
- *  @duplex: stores the current duplex
- *
- *  This is a wrapper function, if using the serial gigabit media independent
- *  interface, use PCS to retrieve the link speed and duplex information.
- *  Otherwise, use the generic function to get the link speed and duplex info.
- **/
-static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed,
-					u16 *duplex)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_get_link_up_info_82575");
-
-	if (hw->phy.media_type != e1000_media_type_copper)
-		ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed,
-							       duplex);
-	else
-		ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed,
-								    duplex);
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_link_82575 - Check for link
- *  @hw: pointer to the HW structure
- *
- *  If sgmii is enabled, then use the pcs register to determine link, otherwise
- *  use the generic interface for determining link.
- **/
-static s32 e1000_check_for_link_82575(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 speed, duplex;
-
-	DEBUGFUNC("e1000_check_for_link_82575");
-
-	if (hw->phy.media_type != e1000_media_type_copper) {
-		ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed,
-							       &duplex);
-		/*
-		 * Use this flag to determine if link needs to be checked or
-		 * not.  If we have link clear the flag so that we do not
-		 * continue to check for link.
-		 */
-		hw->mac.get_link_status = !hw->mac.serdes_has_link;
-
-		/*
-		 * Configure Flow Control now that Auto-Neg has completed.
-		 * First, we need to restore the desired flow control
-		 * settings because we may have had to re-autoneg with a
-		 * different link partner.
-		 */
-		ret_val = e1000_config_fc_after_link_up_generic(hw);
-		if (ret_val)
-			DEBUGOUT("Error configuring flow control\n");
-	} else {
-		ret_val = e1000_check_for_copper_link_generic(hw);
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_link_media_swap - Check which M88E1112 interface linked
- *  @hw: pointer to the HW structure
- *
- *  Poll the M88E1112 interfaces to see which interface achieved link.
- */
-static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 data;
-	u8 port = 0;
-
-	DEBUGFUNC("e1000_check_for_link_media_swap");
-
-	/* Check the copper medium. */
-	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
-	if (ret_val)
-		return ret_val;
-
-	if (data & E1000_M88E1112_STATUS_LINK)
-		port = E1000_MEDIA_PORT_COPPER;
-
-	/* Check the other medium. */
-	ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data);
-	if (ret_val)
-		return ret_val;
-
-	if (data & E1000_M88E1112_STATUS_LINK)
-		port = E1000_MEDIA_PORT_OTHER;
-
-	/* Determine if a swap needs to happen. */
-	if (port && (hw->dev_spec._82575.media_port != port)) {
-		hw->dev_spec._82575.media_port = port;
-		hw->dev_spec._82575.media_changed = true;
-	} else {
-		ret_val = e1000_check_for_link_82575(hw);
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown
- *  @hw: pointer to the HW structure
- **/
-static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw)
-{
-	u32 reg;
-
-	DEBUGFUNC("e1000_power_up_serdes_link_82575");
-
-	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
-	    !e1000_sgmii_active_82575(hw))
-		return;
-
-	/* Enable PCS to turn on link */
-	reg = E1000_READ_REG(hw, E1000_PCS_CFG0);
-	reg |= E1000_PCS_CFG_PCS_EN;
-	E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg);
-
-	/* Power up the laser */
-	reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
-	reg &= ~E1000_CTRL_EXT_SDP3_DATA;
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
-
-	/* flush the write to verify completion */
-	E1000_WRITE_FLUSH(hw);
-	msec_delay(1);
-}
-
-/**
- *  e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
- *  @hw: pointer to the HW structure
- *  @speed: stores the current speed
- *  @duplex: stores the current duplex
- *
- *  Using the physical coding sub-layer (PCS), retrieve the current speed and
- *  duplex, then store the values in the pointers provided.
- **/
-static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw,
-						u16 *speed, u16 *duplex)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 pcs;
-	u32 status;
-
-	DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575");
-
-	/*
-	 * Read the PCS Status register for link state. For non-copper mode,
-	 * the status register is not accurate. The PCS status register is
-	 * used instead.
-	 */
-	pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT);
-
-	/*
-	 * The link up bit determines when link is up on autoneg.
-	 */
-	if (pcs & E1000_PCS_LSTS_LINK_OK) {
-		mac->serdes_has_link = true;
-
-		/* Detect and store PCS speed */
-		if (pcs & E1000_PCS_LSTS_SPEED_1000)
-			*speed = SPEED_1000;
-		else if (pcs & E1000_PCS_LSTS_SPEED_100)
-			*speed = SPEED_100;
-		else
-			*speed = SPEED_10;
-
-		/* Detect and store PCS duplex */
-		if (pcs & E1000_PCS_LSTS_DUPLEX_FULL)
-			*duplex = FULL_DUPLEX;
-		else
-			*duplex = HALF_DUPLEX;
-
-		/* Check if it is an I354 2.5Gb backplane connection. */
-		if (mac->type == e1000_i354) {
-			status = E1000_READ_REG(hw, E1000_STATUS);
-			if ((status & E1000_STATUS_2P5_SKU) &&
-			    !(status & E1000_STATUS_2P5_SKU_OVER)) {
-				*speed = SPEED_2500;
-				*duplex = FULL_DUPLEX;
-				DEBUGOUT("2500 Mbs, ");
-				DEBUGOUT("Full Duplex\n");
-			}
-		}
-
-	} else {
-		mac->serdes_has_link = false;
-		*speed = 0;
-		*duplex = 0;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_shutdown_serdes_link_82575 - Remove link during power down
- *  @hw: pointer to the HW structure
- *
- *  In the case of serdes shut down sfp and PCS on driver unload
- *  when management pass through is not enabled.
- **/
-void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw)
-{
-	u32 reg;
-
-	DEBUGFUNC("e1000_shutdown_serdes_link_82575");
-
-	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
-	    !e1000_sgmii_active_82575(hw))
-		return;
-
-	if (!e1000_enable_mng_pass_thru(hw)) {
-		/* Disable PCS to turn off link */
-		reg = E1000_READ_REG(hw, E1000_PCS_CFG0);
-		reg &= ~E1000_PCS_CFG_PCS_EN;
-		E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg);
-
-		/* shutdown the laser */
-		reg = E1000_READ_REG(hw, E1000_CTRL_EXT);
-		reg |= E1000_CTRL_EXT_SDP3_DATA;
-		E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg);
-
-		/* flush the write to verify completion */
-		E1000_WRITE_FLUSH(hw);
-		msec_delay(1);
-	}
-
-	return;
-}
-
-/**
- *  e1000_reset_hw_82575 - Reset hardware
- *  @hw: pointer to the HW structure
- *
- *  This resets the hardware into a known state.
- **/
-static s32 e1000_reset_hw_82575(struct e1000_hw *hw)
-{
-	u32 ctrl;
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_reset_hw_82575");
-
-	/*
-	 * Prevent the PCI-E bus from sticking if there is no TLP connection
-	 * on the last TLP read/write transaction when MAC is reset.
-	 */
-	ret_val = e1000_disable_pcie_master_generic(hw);
-	if (ret_val)
-		DEBUGOUT("PCI-E Master disable polling has failed.\n");
-
-	/* set the completion timeout for interface */
-	ret_val = e1000_set_pcie_completion_timeout(hw);
-	if (ret_val)
-		DEBUGOUT("PCI-E Set completion timeout has failed.\n");
-
-	DEBUGOUT("Masking off all interrupts\n");
-	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-
-	E1000_WRITE_REG(hw, E1000_RCTL, 0);
-	E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
-	E1000_WRITE_FLUSH(hw);
-
-	msec_delay(10);
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-
-	DEBUGOUT("Issuing a global reset to MAC\n");
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
-
-	ret_val = e1000_get_auto_rd_done_generic(hw);
-	if (ret_val) {
-		/*
-		 * When auto config read does not complete, do not
-		 * return with an error. This can happen in situations
-		 * where there is no eeprom and prevents getting link.
-		 */
-		DEBUGOUT("Auto Read Done did not complete\n");
-	}
-
-	/* If EEPROM is not present, run manual init scripts */
-	if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES))
-		e1000_reset_init_script_82575(hw);
-
-	/* Clear any pending interrupt events. */
-	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-	E1000_READ_REG(hw, E1000_ICR);
-
-	/* Install any alternate MAC address into RAR0 */
-	ret_val = e1000_check_alt_mac_addr_generic(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_init_hw_82575 - Initialize hardware
- *  @hw: pointer to the HW structure
- *
- *  This inits the hardware readying it for operation.
- **/
-static s32 e1000_init_hw_82575(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val;
-	u16 i, rar_count = mac->rar_entry_count;
-
-	DEBUGFUNC("e1000_init_hw_82575");
-
-	/* Initialize identification LED */
-	ret_val = mac->ops.id_led_init(hw);
-	if (ret_val) {
-		DEBUGOUT("Error initializing identification LED\n");
-		/* This is not fatal and we should not stop init due to this */
-	}
-
-	/* Disabling VLAN filtering */
-	DEBUGOUT("Initializing the IEEE VLAN\n");
-	mac->ops.clear_vfta(hw);
-
-	/* Setup the receive address */
-	e1000_init_rx_addrs_generic(hw, rar_count);
-
-	/* Zero out the Multicast HASH table */
-	DEBUGOUT("Zeroing the MTA\n");
-	for (i = 0; i < mac->mta_reg_count; i++)
-		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
-
-	/* Zero out the Unicast HASH table */
-	DEBUGOUT("Zeroing the UTA\n");
-	for (i = 0; i < mac->uta_reg_count; i++)
-		E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0);
-
-	/* Setup link and flow control */
-	ret_val = mac->ops.setup_link(hw);
-
-	/* Set the default MTU size */
-	hw->dev_spec._82575.mtu = 1500;
-
-	/*
-	 * Clear all of the statistics registers (clear on read).  It is
-	 * important that we do this after we have tried to establish link
-	 * because the symbol error count will increment wildly if there
-	 * is no link.
-	 */
-	e1000_clear_hw_cntrs_82575(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_setup_copper_link_82575 - Configure copper link settings
- *  @hw: pointer to the HW structure
- *
- *  Configures the link for auto-neg or forced speed and duplex.  Then we check
- *  for link, once link is established calls to configure collision distance
- *  and flow control are called.
- **/
-static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw)
-{
-	u32 ctrl;
-	s32 ret_val;
-	u32 phpm_reg;
-
-	DEBUGFUNC("e1000_setup_copper_link_82575");
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-	ctrl |= E1000_CTRL_SLU;
-	ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-
-	/* Clear Go Link Disconnect bit on supported devices */
-	switch (hw->mac.type) {
-	case e1000_82580:
-	case e1000_i350:
-	case e1000_i210:
-	case e1000_i211:
-		phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT);
-		phpm_reg &= ~E1000_82580_PM_GO_LINKD;
-		E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg);
-		break;
-	default:
-		break;
-	}
-
-	ret_val = e1000_setup_serdes_link_82575(hw);
-	if (ret_val)
-		goto out;
-
-	if (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
-		/* allow time for SFP cage time to power up phy */
-		msec_delay(300);
-
-		ret_val = hw->phy.ops.reset(hw);
-		if (ret_val) {
-			DEBUGOUT("Error resetting the PHY.\n");
-			goto out;
-		}
-	}
-	switch (hw->phy.type) {
-	case e1000_phy_i210:
-	case e1000_phy_m88:
-		switch (hw->phy.id) {
-		case I347AT4_E_PHY_ID:
-		case M88E1112_E_PHY_ID:
-		case M88E1340M_E_PHY_ID:
-		case M88E1543_E_PHY_ID:
-		case I210_I_PHY_ID:
-			ret_val = e1000_copper_link_setup_m88_gen2(hw);
-			break;
-		default:
-			ret_val = e1000_copper_link_setup_m88(hw);
-			break;
-		}
-		break;
-	case e1000_phy_igp_3:
-		ret_val = e1000_copper_link_setup_igp(hw);
-		break;
-	case e1000_phy_82580:
-		ret_val = e1000_copper_link_setup_82577(hw);
-		break;
-	default:
-		ret_val = -E1000_ERR_PHY;
-		break;
-	}
-
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000_setup_copper_link_generic(hw);
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_setup_serdes_link_82575 - Setup link for serdes
- *  @hw: pointer to the HW structure
- *
- *  Configure the physical coding sub-layer (PCS) link.  The PCS link is
- *  used on copper connections where the serialized gigabit media independent
- *  interface (sgmii), or serdes fiber is being used.  Configures the link
- *  for auto-negotiation or forces speed/duplex.
- **/
-static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw)
-{
-	u32 ctrl_ext, ctrl_reg, reg, anadv_reg;
-	bool pcs_autoneg;
-	s32 ret_val = E1000_SUCCESS;
-	u16 data;
-
-	DEBUGFUNC("e1000_setup_serdes_link_82575");
-
-	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
-	    !e1000_sgmii_active_82575(hw))
-		return ret_val;
-
-	/*
-	 * On the 82575, SerDes loopback mode persists until it is
-	 * explicitly turned off or a power cycle is performed.  A read to
-	 * the register does not indicate its status.  Therefore, we ensure
-	 * loopback mode is disabled during initialization.
-	 */
-	E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
-
-	/* power on the sfp cage if present */
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-	ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-
-	ctrl_reg = E1000_READ_REG(hw, E1000_CTRL);
-	ctrl_reg |= E1000_CTRL_SLU;
-
-	/* set both sw defined pins on 82575/82576*/
-	if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576)
-		ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
-
-	reg = E1000_READ_REG(hw, E1000_PCS_LCTL);
-
-	/* default pcs_autoneg to the same setting as mac autoneg */
-	pcs_autoneg = hw->mac.autoneg;
-
-	switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
-	case E1000_CTRL_EXT_LINK_MODE_SGMII:
-		/* sgmii mode lets the phy handle forcing speed/duplex */
-		pcs_autoneg = true;
-		/* autoneg time out should be disabled for SGMII mode */
-		reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
-		break;
-	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
-		/* disable PCS autoneg and support parallel detect only */
-		pcs_autoneg = false;
-		/* fall through to default case */
-	default:
-		if (hw->mac.type == e1000_82575 ||
-		    hw->mac.type == e1000_82576) {
-			ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
-			if (ret_val) {
-				DEBUGOUT("NVM Read Error\n");
-				return ret_val;
-			}
-
-			if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
-				pcs_autoneg = false;
-		}
-
-		/*
-		 * non-SGMII modes only supports a speed of 1000/Full for the
-		 * link so it is best to just force the MAC and let the pcs
-		 * link either autoneg or be forced to 1000/Full
-		 */
-		ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
-			    E1000_CTRL_FD | E1000_CTRL_FRCDPX;
-
-		/* set speed of 1000/Full if speed/duplex is forced */
-		reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
-		break;
-	}
-
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg);
-
-	/*
-	 * New SerDes mode allows for forcing speed or autonegotiating speed
-	 * at 1gb. Autoneg should be default set by most drivers. This is the
-	 * mode that will be compatible with older link partners and switches.
-	 * However, both are supported by the hardware and some drivers/tools.
-	 */
-	reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
-		 E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
-
-	if (pcs_autoneg) {
-		/* Set PCS register for autoneg */
-		reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
-		       E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
-
-		/* Disable force flow control for autoneg */
-		reg &= ~E1000_PCS_LCTL_FORCE_FCTRL;
-
-		/* Configure flow control advertisement for autoneg */
-		anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV);
-		anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE);
-
-		switch (hw->fc.requested_mode) {
-		case e1000_fc_full:
-		case e1000_fc_rx_pause:
-			anadv_reg |= E1000_TXCW_ASM_DIR;
-			anadv_reg |= E1000_TXCW_PAUSE;
-			break;
-		case e1000_fc_tx_pause:
-			anadv_reg |= E1000_TXCW_ASM_DIR;
-			break;
-		default:
-			break;
-		}
-
-		E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg);
-
-		DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
-	} else {
-		/* Set PCS register for forced link */
-		reg |= E1000_PCS_LCTL_FSD;	/* Force Speed */
-
-		/* Force flow control for forced link */
-		reg |= E1000_PCS_LCTL_FORCE_FCTRL;
-
-		DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
-	}
-
-	E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg);
-
-	if (!pcs_autoneg && !e1000_sgmii_active_82575(hw))
-		e1000_force_mac_fc_generic(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_get_media_type_82575 - derives current media type.
- *  @hw: pointer to the HW structure
- *
- *  The media type is chosen reflecting few settings.
- *  The following are taken into account:
- *  - link mode set in the current port Init Control Word #3
- *  - current link mode settings in CSR register
- *  - MDIO vs. I2C PHY control interface chosen
- *  - SFP module media type
- **/
-static s32 e1000_get_media_type_82575(struct e1000_hw *hw)
-{
-	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
-	s32 ret_val = E1000_SUCCESS;
-	u32 ctrl_ext = 0;
-	u32 link_mode = 0;
-
-	/* Set internal phy as default */
-	dev_spec->sgmii_active = false;
-	dev_spec->module_plugged = false;
-
-	/* Get CSR setting */
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-
-	/* extract link mode setting */
-	link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK;
-
-	switch (link_mode) {
-	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
-		hw->phy.media_type = e1000_media_type_internal_serdes;
-		break;
-	case E1000_CTRL_EXT_LINK_MODE_GMII:
-		hw->phy.media_type = e1000_media_type_copper;
-		break;
-	case E1000_CTRL_EXT_LINK_MODE_SGMII:
-		/* Get phy control interface type set (MDIO vs. I2C)*/
-		if (e1000_sgmii_uses_mdio_82575(hw)) {
-			hw->phy.media_type = e1000_media_type_copper;
-			dev_spec->sgmii_active = true;
-			break;
-		}
-		/* fall through for I2C based SGMII */
-	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
-		/* read media type from SFP EEPROM */
-		ret_val = e1000_set_sfp_media_type_82575(hw);
-		if ((ret_val != E1000_SUCCESS) ||
-		    (hw->phy.media_type == e1000_media_type_unknown)) {
-			/*
-			 * If media type was not identified then return media
-			 * type defined by the CTRL_EXT settings.
-			 */
-			hw->phy.media_type = e1000_media_type_internal_serdes;
-
-			if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) {
-				hw->phy.media_type = e1000_media_type_copper;
-				dev_spec->sgmii_active = true;
-			}
-
-			break;
-		}
-
-		/* do not change link mode for 100BaseFX */
-		if (dev_spec->eth_flags.e100_base_fx)
-			break;
-
-		/* change current link mode setting */
-		ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK;
-
-		if (hw->phy.media_type == e1000_media_type_copper)
-			ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII;
-		else
-			ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
-
-		E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-
-		break;
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_set_sfp_media_type_82575 - derives SFP module media type.
- *  @hw: pointer to the HW structure
- *
- *  The media type is chosen based on SFP module.
- *  compatibility flags retrieved from SFP ID EEPROM.
- **/
-static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_ERR_CONFIG;
-	u32 ctrl_ext = 0;
-	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
-	struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags;
-	u8 tranceiver_type = 0;
-	s32 timeout = 3;
-
-	/* Turn I2C interface ON and power on sfp cage */
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-	ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA);
-
-	E1000_WRITE_FLUSH(hw);
-
-	/* Read SFP module data */
-	while (timeout) {
-		ret_val = e1000_read_sfp_data_byte(hw,
-			E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET),
-			&tranceiver_type);
-		if (ret_val == E1000_SUCCESS)
-			break;
-		msec_delay(100);
-		timeout--;
-	}
-	if (ret_val != E1000_SUCCESS)
-		goto out;
-
-	ret_val = e1000_read_sfp_data_byte(hw,
-			E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET),
-			(u8 *)eth_flags);
-	if (ret_val != E1000_SUCCESS)
-		goto out;
-
-	/* Check if there is some SFP module plugged and powered */
-	if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) ||
-	    (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) {
-		dev_spec->module_plugged = true;
-		if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) {
-			hw->phy.media_type = e1000_media_type_internal_serdes;
-		} else if (eth_flags->e100_base_fx) {
-			dev_spec->sgmii_active = true;
-			hw->phy.media_type = e1000_media_type_internal_serdes;
-		} else if (eth_flags->e1000_base_t) {
-			dev_spec->sgmii_active = true;
-			hw->phy.media_type = e1000_media_type_copper;
-		} else {
-			hw->phy.media_type = e1000_media_type_unknown;
-			DEBUGOUT("PHY module has not been recognized\n");
-			goto out;
-		}
-	} else {
-		hw->phy.media_type = e1000_media_type_unknown;
-	}
-	ret_val = E1000_SUCCESS;
-out:
-	/* Restore I2C interface setting */
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-	return ret_val;
-}
-
-/**
- *  e1000_valid_led_default_82575 - Verify a valid default LED config
- *  @hw: pointer to the HW structure
- *  @data: pointer to the NVM (EEPROM)
- *
- *  Read the EEPROM for the current default LED configuration.  If the
- *  LED configuration is not valid, set to a valid LED configuration.
- **/
-static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_valid_led_default_82575");
-
-	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		goto out;
-	}
-
-	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
-		switch (hw->phy.media_type) {
-		case e1000_media_type_internal_serdes:
-			*data = ID_LED_DEFAULT_82575_SERDES;
-			break;
-		case e1000_media_type_copper:
-		default:
-			*data = ID_LED_DEFAULT;
-			break;
-		}
-	}
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_sgmii_active_82575 - Return sgmii state
- *  @hw: pointer to the HW structure
- *
- *  82575 silicon has a serialized gigabit media independent interface (sgmii)
- *  which can be enabled for use in the embedded applications.  Simply
- *  return the current state of the sgmii interface.
- **/
-static bool e1000_sgmii_active_82575(struct e1000_hw *hw)
-{
-	struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
-	return dev_spec->sgmii_active;
-}
-
-/**
- *  e1000_reset_init_script_82575 - Inits HW defaults after reset
- *  @hw: pointer to the HW structure
- *
- *  Inits recommended HW defaults after a reset when there is no EEPROM
- *  detected. This is only for the 82575.
- **/
-static s32 e1000_reset_init_script_82575(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_reset_init_script_82575");
-
-	if (hw->mac.type == e1000_82575) {
-		DEBUGOUT("Running reset init script for 82575\n");
-		/* SerDes configuration via SERDESCTRL */
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15);
-
-		/* CCM configuration via CCMCTL register */
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00);
-
-		/* PCIe lanes configuration */
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81);
-
-		/* PCIe PLL Configuration */
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00);
-		e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00);
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_mac_addr_82575 - Read device MAC address
- *  @hw: pointer to the HW structure
- **/
-static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_read_mac_addr_82575");
-
-	/*
-	 * If there's an alternate MAC address place it in RAR0
-	 * so that it will override the Si installed default perm
-	 * address.
-	 */
-	ret_val = e1000_check_alt_mac_addr_generic(hw);
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000_read_mac_addr_generic(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_config_collision_dist_82575 - Configure collision distance
- *  @hw: pointer to the HW structure
- *
- *  Configures the collision distance to the default value and is used
- *  during link setup.
- **/
-static void e1000_config_collision_dist_82575(struct e1000_hw *hw)
-{
-	u32 tctl_ext;
-
-	DEBUGFUNC("e1000_config_collision_dist_82575");
-
-	tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT);
-
-	tctl_ext &= ~E1000_TCTL_EXT_COLD;
-	tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT;
-
-	E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/**
- * e1000_power_down_phy_copper_82575 - Remove link during PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, remove the link.
- **/
-static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-
-	if (!(phy->ops.check_reset_block))
-		return;
-
-	/* If the management interface is not enabled, then power down */
-	if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw)))
-		e1000_power_down_phy_copper(hw);
-
-	return;
-}
-
-/**
- *  e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters
- *  @hw: pointer to the HW structure
- *
- *  Clears the hardware counters by reading the counter registers.
- **/
-static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_clear_hw_cntrs_82575");
-
-	e1000_clear_hw_cntrs_base_generic(hw);
-
-	E1000_READ_REG(hw, E1000_PRC64);
-	E1000_READ_REG(hw, E1000_PRC127);
-	E1000_READ_REG(hw, E1000_PRC255);
-	E1000_READ_REG(hw, E1000_PRC511);
-	E1000_READ_REG(hw, E1000_PRC1023);
-	E1000_READ_REG(hw, E1000_PRC1522);
-	E1000_READ_REG(hw, E1000_PTC64);
-	E1000_READ_REG(hw, E1000_PTC127);
-	E1000_READ_REG(hw, E1000_PTC255);
-	E1000_READ_REG(hw, E1000_PTC511);
-	E1000_READ_REG(hw, E1000_PTC1023);
-	E1000_READ_REG(hw, E1000_PTC1522);
-
-	E1000_READ_REG(hw, E1000_ALGNERRC);
-	E1000_READ_REG(hw, E1000_RXERRC);
-	E1000_READ_REG(hw, E1000_TNCRS);
-	E1000_READ_REG(hw, E1000_CEXTERR);
-	E1000_READ_REG(hw, E1000_TSCTC);
-	E1000_READ_REG(hw, E1000_TSCTFC);
-
-	E1000_READ_REG(hw, E1000_MGTPRC);
-	E1000_READ_REG(hw, E1000_MGTPDC);
-	E1000_READ_REG(hw, E1000_MGTPTC);
-
-	E1000_READ_REG(hw, E1000_IAC);
-	E1000_READ_REG(hw, E1000_ICRXOC);
-
-	E1000_READ_REG(hw, E1000_ICRXPTC);
-	E1000_READ_REG(hw, E1000_ICRXATC);
-	E1000_READ_REG(hw, E1000_ICTXPTC);
-	E1000_READ_REG(hw, E1000_ICTXATC);
-	E1000_READ_REG(hw, E1000_ICTXQEC);
-	E1000_READ_REG(hw, E1000_ICTXQMTC);
-	E1000_READ_REG(hw, E1000_ICRXDMTC);
-
-	E1000_READ_REG(hw, E1000_CBTMPC);
-	E1000_READ_REG(hw, E1000_HTDPMC);
-	E1000_READ_REG(hw, E1000_CBRMPC);
-	E1000_READ_REG(hw, E1000_RPTHC);
-	E1000_READ_REG(hw, E1000_HGPTC);
-	E1000_READ_REG(hw, E1000_HTCBDPC);
-	E1000_READ_REG(hw, E1000_HGORCL);
-	E1000_READ_REG(hw, E1000_HGORCH);
-	E1000_READ_REG(hw, E1000_HGOTCL);
-	E1000_READ_REG(hw, E1000_HGOTCH);
-	E1000_READ_REG(hw, E1000_LENERRS);
-
-	/* This register should not be read in copper configurations */
-	if ((hw->phy.media_type == e1000_media_type_internal_serdes) ||
-	    e1000_sgmii_active_82575(hw))
-		E1000_READ_REG(hw, E1000_SCVPC);
-}
-
-/**
- *  e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable
- *  @hw: pointer to the HW structure
- *
- *  After rx enable if managability is enabled then there is likely some
- *  bad data at the start of the fifo and possibly in the DMA fifo.  This
- *  function clears the fifos and flushes any packets that came in as rx was
- *  being enabled.
- **/
-void e1000_rx_fifo_flush_82575(struct e1000_hw *hw)
-{
-	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
-	int i, ms_wait;
-
-	DEBUGFUNC("e1000_rx_fifo_workaround_82575");
-	if (hw->mac.type != e1000_82575 ||
-	    !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN))
-		return;
-
-	/* Disable all Rx queues */
-	for (i = 0; i < 4; i++) {
-		rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i));
-		E1000_WRITE_REG(hw, E1000_RXDCTL(i),
-				rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
-	}
-	/* Poll all queues to verify they have shut down */
-	for (ms_wait = 0; ms_wait < 10; ms_wait++) {
-		msec_delay(1);
-		rx_enabled = 0;
-		for (i = 0; i < 4; i++)
-			rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i));
-		if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
-			break;
-	}
-
-	if (ms_wait == 10)
-		DEBUGOUT("Queue disable timed out after 10ms\n");
-
-	/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
-	 * incoming packets are rejected.  Set enable and wait 2ms so that
-	 * any packet that was coming in as RCTL.EN was set is flushed
-	 */
-	rfctl = E1000_READ_REG(hw, E1000_RFCTL);
-	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
-
-	rlpml = E1000_READ_REG(hw, E1000_RLPML);
-	E1000_WRITE_REG(hw, E1000_RLPML, 0);
-
-	rctl = E1000_READ_REG(hw, E1000_RCTL);
-	temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
-	temp_rctl |= E1000_RCTL_LPE;
-
-	E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl);
-	E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN);
-	E1000_WRITE_FLUSH(hw);
-	msec_delay(2);
-
-	/* Enable Rx queues that were previously enabled and restore our
-	 * previous state
-	 */
-	for (i = 0; i < 4; i++)
-		E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]);
-	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
-	E1000_WRITE_FLUSH(hw);
-
-	E1000_WRITE_REG(hw, E1000_RLPML, rlpml);
-	E1000_WRITE_REG(hw, E1000_RFCTL, rfctl);
-
-	/* Flush receive errors generated by workaround */
-	E1000_READ_REG(hw, E1000_ROC);
-	E1000_READ_REG(hw, E1000_RNBC);
-	E1000_READ_REG(hw, E1000_MPC);
-}
-
-/**
- *  e1000_set_pcie_completion_timeout - set pci-e completion timeout
- *  @hw: pointer to the HW structure
- *
- *  The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
- *  however the hardware default for these parts is 500us to 1ms which is less
- *  than the 10ms recommended by the pci-e spec.  To address this we need to
- *  increase the value to either 10ms to 200ms for capability version 1 config,
- *  or 16ms to 55ms for version 2.
- **/
-static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw)
-{
-	u32 gcr = E1000_READ_REG(hw, E1000_GCR);
-	s32 ret_val = E1000_SUCCESS;
-	u16 pcie_devctl2;
-
-	/* only take action if timeout value is defaulted to 0 */
-	if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
-		goto out;
-
-	/*
-	 * if capababilities version is type 1 we can write the
-	 * timeout of 10ms to 200ms through the GCR register
-	 */
-	if (!(gcr & E1000_GCR_CAP_VER2)) {
-		gcr |= E1000_GCR_CMPL_TMOUT_10ms;
-		goto out;
-	}
-
-	/*
-	 * for version 2 capabilities we need to write the config space
-	 * directly in order to set the completion timeout value for
-	 * 16ms to 55ms
-	 */
-	ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
-					  &pcie_devctl2);
-	if (ret_val)
-		goto out;
-
-	pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
-
-	ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
-					   &pcie_devctl2);
-out:
-	/* disable completion timeout resend */
-	gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
-
-	E1000_WRITE_REG(hw, E1000_GCR, gcr);
-	return ret_val;
-}
-
-/**
- *  e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
- *  @hw: pointer to the hardware struct
- *  @enable: state to enter, either enabled or disabled
- *  @pf: Physical Function pool - do not set anti-spoofing for the PF
- *
- *  enables/disables L2 switch anti-spoofing functionality.
- **/
-void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
-{
-	u32 reg_val, reg_offset;
-
-	switch (hw->mac.type) {
-	case e1000_82576:
-		reg_offset = E1000_DTXSWC;
-		break;
-	case e1000_i350:
-	case e1000_i354:
-		reg_offset = E1000_TXSWC;
-		break;
-	default:
-		return;
-	}
-
-	reg_val = E1000_READ_REG(hw, reg_offset);
-	if (enable) {
-		reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK |
-			     E1000_DTXSWC_VLAN_SPOOF_MASK);
-		/* The PF can spoof - it has to in order to
-		 * support emulation mode NICs
-		 */
-		reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
-	} else {
-		reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
-			     E1000_DTXSWC_VLAN_SPOOF_MASK);
-	}
-	E1000_WRITE_REG(hw, reg_offset, reg_val);
-}
-
-/**
- *  e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback
- *  @hw: pointer to the hardware struct
- *  @enable: state to enter, either enabled or disabled
- *
- *  enables/disables L2 switch loopback functionality.
- **/
-void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
-{
-	u32 dtxswc;
-
-	switch (hw->mac.type) {
-	case e1000_82576:
-		dtxswc = E1000_READ_REG(hw, E1000_DTXSWC);
-		if (enable)
-			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
-		else
-			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
-		E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc);
-		break;
-	case e1000_i350:
-	case e1000_i354:
-		dtxswc = E1000_READ_REG(hw, E1000_TXSWC);
-		if (enable)
-			dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
-		else
-			dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
-		E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc);
-		break;
-	default:
-		/* Currently no other hardware supports loopback */
-		break;
-	}
-
-
-}
-
-/**
- *  e1000_vmdq_set_replication_pf - enable or disable vmdq replication
- *  @hw: pointer to the hardware struct
- *  @enable: state to enter, either enabled or disabled
- *
- *  enables/disables replication of packets across multiple pools.
- **/
-void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
-{
-	u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL);
-
-	if (enable)
-		vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
-	else
-		vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
-
-	E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl);
-}
-
-/**
- *  e1000_read_phy_reg_82580 - Read 82580 MDI control register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Reads the MDI control register in the PHY at offset and stores the
- *  information read to data.
- **/
-static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_read_phy_reg_82580");
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000_read_phy_reg_mdic(hw, offset, data);
-
-	hw->phy.ops.release(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_write_phy_reg_82580 - Write 82580 MDI control register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write to register at offset
- *
- *  Writes data to MDI control register in the PHY at offset.
- **/
-static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_write_phy_reg_82580");
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		goto out;
-
-	ret_val = e1000_write_phy_reg_mdic(hw, offset, data);
-
-	hw->phy.ops.release(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
- *  @hw: pointer to the HW structure
- *
- *  This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
- *  the values found in the EEPROM.  This addresses an issue in which these
- *  bits are not restored from EEPROM after reset.
- **/
-static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u32 mdicnfg;
-	u16 nvm_data = 0;
-
-	DEBUGFUNC("e1000_reset_mdicnfg_82580");
-
-	if (hw->mac.type != e1000_82580)
-		goto out;
-	if (!e1000_sgmii_active_82575(hw))
-		goto out;
-
-	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
-				   NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
-				   &nvm_data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		goto out;
-	}
-
-	mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG);
-	if (nvm_data & NVM_WORD24_EXT_MDIO)
-		mdicnfg |= E1000_MDICNFG_EXT_MDIO;
-	if (nvm_data & NVM_WORD24_COM_MDIO)
-		mdicnfg |= E1000_MDICNFG_COM_MDIO;
-	E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg);
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_reset_hw_82580 - Reset hardware
- *  @hw: pointer to the HW structure
- *
- *  This resets function or entire device (all ports, etc.)
- *  to a known state.
- **/
-static s32 e1000_reset_hw_82580(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	/* BH SW mailbox bit in SW_FW_SYNC */
-	u16 swmbsw_mask = E1000_SW_SYNCH_MB;
-	u32 ctrl;
-	bool global_device_reset = hw->dev_spec._82575.global_device_reset;
-
-	DEBUGFUNC("e1000_reset_hw_82580");
-
-	hw->dev_spec._82575.global_device_reset = false;
-
-	/* 82580 does not reliably do global_device_reset due to hw errata */
-	if (hw->mac.type == e1000_82580)
-		global_device_reset = false;
-
-	/* Get current control state. */
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-
-	/*
-	 * Prevent the PCI-E bus from sticking if there is no TLP connection
-	 * on the last TLP read/write transaction when MAC is reset.
-	 */
-	ret_val = e1000_disable_pcie_master_generic(hw);
-	if (ret_val)
-		DEBUGOUT("PCI-E Master disable polling has failed.\n");
-
-	DEBUGOUT("Masking off all interrupts\n");
-	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-	E1000_WRITE_REG(hw, E1000_RCTL, 0);
-	E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
-	E1000_WRITE_FLUSH(hw);
-
-	msec_delay(10);
-
-	/* Determine whether or not a global dev reset is requested */
-	if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw,
-	    swmbsw_mask))
-			global_device_reset = false;
-
-	if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) &
-	    E1000_STAT_DEV_RST_SET))
-		ctrl |= E1000_CTRL_DEV_RST;
-	else
-		ctrl |= E1000_CTRL_RST;
-
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-	E1000_WRITE_FLUSH(hw);
-
-	/* Add delay to insure DEV_RST has time to complete */
-	if (global_device_reset)
-		msec_delay(5);
-
-	ret_val = e1000_get_auto_rd_done_generic(hw);
-	if (ret_val) {
-		/*
-		 * When auto config read does not complete, do not
-		 * return with an error. This can happen in situations
-		 * where there is no eeprom and prevents getting link.
-		 */
-		DEBUGOUT("Auto Read Done did not complete\n");
-	}
-
-	/* clear global device reset status bit */
-	E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET);
-
-	/* Clear any pending interrupt events. */
-	E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
-	E1000_READ_REG(hw, E1000_ICR);
-
-	ret_val = e1000_reset_mdicnfg_82580(hw);
-	if (ret_val)
-		DEBUGOUT("Could not reset MDICNFG based on EEPROM\n");
-
-	/* Install any alternate MAC address into RAR0 */
-	ret_val = e1000_check_alt_mac_addr_generic(hw);
-
-	/* Release semaphore */
-	if (global_device_reset)
-		hw->mac.ops.release_swfw_sync(hw, swmbsw_mask);
-
-	return ret_val;
-}
-
-/**
- *  e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size
- *  @data: data received by reading RXPBS register
- *
- *  The 82580 uses a table based approach for packet buffer allocation sizes.
- *  This function converts the retrieved value into the correct table value
- *     0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
- *  0x0 36  72 144   1   2   4   8  16
- *  0x8 35  70 140 rsv rsv rsv rsv rsv
- */
-u16 e1000_rxpbs_adjust_82580(u32 data)
-{
-	u16 ret_val = 0;
-
-	if (data < E1000_82580_RXPBS_TABLE_SIZE)
-		ret_val = e1000_82580_rxpbs_table[data];
-
-	return ret_val;
-}
-
-/**
- *  e1000_validate_nvm_checksum_with_offset - Validate EEPROM
- *  checksum
- *  @hw: pointer to the HW structure
- *  @offset: offset in words of the checksum protected region
- *
- *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	DEBUGFUNC("e1000_validate_nvm_checksum_with_offset");
-
-	for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
-		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Read Error\n");
-			goto out;
-		}
-		checksum += nvm_data;
-	}
-
-	if (checksum != (u16) NVM_SUM) {
-		DEBUGOUT("NVM Checksum Invalid\n");
-		ret_val = -E1000_ERR_NVM;
-		goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_update_nvm_checksum_with_offset - Update EEPROM
- *  checksum
- *  @hw: pointer to the HW structure
- *  @offset: offset in words of the checksum protected region
- *
- *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
- *  up to the checksum.  Then calculates the EEPROM checksum and writes the
- *  value to the EEPROM.
- **/
-s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
-{
-	s32 ret_val;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	DEBUGFUNC("e1000_update_nvm_checksum_with_offset");
-
-	for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
-		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Read Error while updating checksum.\n");
-			goto out;
-		}
-		checksum += nvm_data;
-	}
-	checksum = (u16) NVM_SUM - checksum;
-	ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
-				    &checksum);
-	if (ret_val)
-		DEBUGOUT("NVM Write Error while updating checksum.\n");
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Calculates the EEPROM section checksum by reading/adding each word of
- *  the EEPROM and then verifies that the sum of the EEPROM is
- *  equal to 0xBABA.
- **/
-static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u16 eeprom_regions_count = 1;
-	u16 j, nvm_data;
-	u16 nvm_offset;
-
-	DEBUGFUNC("e1000_validate_nvm_checksum_82580");
-
-	ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		goto out;
-	}
-
-	if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
-		/* if chekcsums compatibility bit is set validate checksums
-		 * for all 4 ports. */
-		eeprom_regions_count = 4;
-	}
-
-	for (j = 0; j < eeprom_regions_count; j++) {
-		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
-		ret_val = e1000_validate_nvm_checksum_with_offset(hw,
-								  nvm_offset);
-		if (ret_val != E1000_SUCCESS)
-			goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_update_nvm_checksum_82580 - Update EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Updates the EEPROM section checksums for all 4 ports by reading/adding
- *  each word of the EEPROM up to the checksum.  Then calculates the EEPROM
- *  checksum and writes the value to the EEPROM.
- **/
-static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 j, nvm_data;
-	u16 nvm_offset;
-
-	DEBUGFUNC("e1000_update_nvm_checksum_82580");
-
-	ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n");
-		goto out;
-	}
-
-	if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) {
-		/* set compatibility bit to validate checksums appropriately */
-		nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
-		ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
-					    &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n");
-			goto out;
-		}
-	}
-
-	for (j = 0; j < 4; j++) {
-		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
-		ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset);
-		if (ret_val)
-			goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Calculates the EEPROM section checksum by reading/adding each word of
- *  the EEPROM and then verifies that the sum of the EEPROM is
- *  equal to 0xBABA.
- **/
-static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u16 j;
-	u16 nvm_offset;
-
-	DEBUGFUNC("e1000_validate_nvm_checksum_i350");
-
-	for (j = 0; j < 4; j++) {
-		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
-		ret_val = e1000_validate_nvm_checksum_with_offset(hw,
-								  nvm_offset);
-		if (ret_val != E1000_SUCCESS)
-			goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_update_nvm_checksum_i350 - Update EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Updates the EEPROM section checksums for all 4 ports by reading/adding
- *  each word of the EEPROM up to the checksum.  Then calculates the EEPROM
- *  checksum and writes the value to the EEPROM.
- **/
-static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u16 j;
-	u16 nvm_offset;
-
-	DEBUGFUNC("e1000_update_nvm_checksum_i350");
-
-	for (j = 0; j < 4; j++) {
-		nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
-		ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset);
-		if (ret_val != E1000_SUCCESS)
-			goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  __e1000_access_emi_reg - Read/write EMI register
- *  @hw: pointer to the HW structure
- *  @addr: EMI address to program
- *  @data: pointer to value to read/write from/to the EMI address
- *  @read: boolean flag to indicate read or write
- **/
-static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address,
-				  u16 *data, bool read)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("__e1000_access_emi_reg");
-
-	ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address);
-	if (ret_val)
-		return ret_val;
-
-	if (read)
-		ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data);
-	else
-		ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data);
-
-	return ret_val;
-}
-
-/**
- *  e1000_read_emi_reg - Read Extended Management Interface register
- *  @hw: pointer to the HW structure
- *  @addr: EMI address to program
- *  @data: value to be read from the EMI address
- **/
-s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
-{
-	DEBUGFUNC("e1000_read_emi_reg");
-
-	return __e1000_access_emi_reg(hw, addr, data, true);
-}
-
-/**
- *  e1000_set_eee_i350 - Enable/disable EEE support
- *  @hw: pointer to the HW structure
- *
- *  Enable/disable EEE based on setting in dev_spec structure.
- *
- **/
-s32 e1000_set_eee_i350(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u32 ipcnfg, eeer;
-
-	DEBUGFUNC("e1000_set_eee_i350");
-
-	if ((hw->mac.type < e1000_i350) ||
-	    (hw->phy.media_type != e1000_media_type_copper))
-		goto out;
-	ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG);
-	eeer = E1000_READ_REG(hw, E1000_EEER);
-
-	/* enable or disable per user setting */
-	if (!(hw->dev_spec._82575.eee_disable)) {
-		u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU);
-
-		ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
-		eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
-			 E1000_EEER_LPI_FC);
-
-		/* This bit should not be set in normal operation. */
-		if (eee_su & E1000_EEE_SU_LPI_CLK_STP)
-			DEBUGOUT("LPI Clock Stop Bit should not be set!\n");
-	} else {
-		ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN);
-		eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN |
-			  E1000_EEER_LPI_FC);
-	}
-	E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg);
-	E1000_WRITE_REG(hw, E1000_EEER, eeer);
-	E1000_READ_REG(hw, E1000_IPCNFG);
-	E1000_READ_REG(hw, E1000_EEER);
-out:
-
-	return ret_val;
-}
-
-/**
- *  e1000_set_eee_i354 - Enable/disable EEE support
- *  @hw: pointer to the HW structure
- *
- *  Enable/disable EEE legacy mode based on setting in dev_spec structure.
- *
- **/
-s32 e1000_set_eee_i354(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u16 phy_data;
-
-	DEBUGFUNC("e1000_set_eee_i354");
-
-	if ((hw->phy.media_type != e1000_media_type_copper) ||
-	    ((phy->id != M88E1543_E_PHY_ID)))
-		goto out;
-
-	if (!hw->dev_spec._82575.eee_disable) {
-		/* Switch to PHY page 18. */
-		ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18);
-		if (ret_val)
-			goto out;
-
-		ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1,
-					    &phy_data);
-		if (ret_val)
-			goto out;
-
-		phy_data |= E1000_M88E1543_EEE_CTRL_1_MS;
-		ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1,
-					     phy_data);
-		if (ret_val)
-			goto out;
-
-		/* Return the PHY to page 0. */
-		ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
-		if (ret_val)
-			goto out;
-
-		/* Turn on EEE advertisement. */
-		ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
-					       E1000_EEE_ADV_DEV_I354,
-					       &phy_data);
-		if (ret_val)
-			goto out;
-
-		phy_data |= E1000_EEE_ADV_100_SUPPORTED |
-			    E1000_EEE_ADV_1000_SUPPORTED;
-		ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
-						E1000_EEE_ADV_DEV_I354,
-						phy_data);
-	} else {
-		/* Turn off EEE advertisement. */
-		ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
-					       E1000_EEE_ADV_DEV_I354,
-					       &phy_data);
-		if (ret_val)
-			goto out;
-
-		phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED |
-			      E1000_EEE_ADV_1000_SUPPORTED);
-		ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354,
-						E1000_EEE_ADV_DEV_I354,
-						phy_data);
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_get_eee_status_i354 - Get EEE status
- *  @hw: pointer to the HW structure
- *  @status: EEE status
- *
- *  Get EEE status by guessing based on whether Tx or Rx LPI indications have
- *  been received.
- **/
-s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u16 phy_data;
-
-	DEBUGFUNC("e1000_get_eee_status_i354");
-
-	/* Check if EEE is supported on this device. */
-	if ((hw->phy.media_type != e1000_media_type_copper) ||
-	    ((phy->id != M88E1543_E_PHY_ID)))
-		goto out;
-
-	ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
-				       E1000_PCS_STATUS_DEV_I354,
-				       &phy_data);
-	if (ret_val)
-		goto out;
-
-	*status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD |
-			      E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false;
-
-out:
-	return ret_val;
-}
-
-/* Due to a hw errata, if the host tries to  configure the VFTA register
- * while performing queries from the BMC or DMA, then the VFTA in some
- * cases won't be written.
- */
-
-/**
- *  e1000_clear_vfta_i350 - Clear VLAN filter table
- *  @hw: pointer to the HW structure
- *
- *  Clears the register array which contains the VLAN filter table by
- *  setting all the values to 0.
- **/
-void e1000_clear_vfta_i350(struct e1000_hw *hw)
-{
-	u32 offset;
-	int i;
-
-	DEBUGFUNC("e1000_clear_vfta_350");
-
-	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
-		for (i = 0; i < 10; i++)
-			E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
-
-		E1000_WRITE_FLUSH(hw);
-	}
-}
-
-/**
- *  e1000_write_vfta_i350 - Write value to VLAN filter table
- *  @hw: pointer to the HW structure
- *  @offset: register offset in VLAN filter table
- *  @value: register value written to VLAN filter table
- *
- *  Writes value at the given offset in the register array which stores
- *  the VLAN filter table.
- **/
-void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value)
-{
-	int i;
-
-	DEBUGFUNC("e1000_write_vfta_350");
-
-	for (i = 0; i < 10; i++)
-		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
-
-	E1000_WRITE_FLUSH(hw);
-}
-
-
-/**
- *  e1000_set_i2c_bb - Enable I2C bit-bang
- *  @hw: pointer to the HW structure
- *
- *  Enable I2C bit-bang interface
- *
- **/
-s32 e1000_set_i2c_bb(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u32 ctrl_ext, i2cparams;
-
-	DEBUGFUNC("e1000_set_i2c_bb");
-
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-	ctrl_ext |= E1000_CTRL_I2C_ENA;
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-	E1000_WRITE_FLUSH(hw);
-
-	i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS);
-	i2cparams |= E1000_I2CBB_EN;
-	i2cparams |= E1000_I2C_DATA_OE_N;
-	i2cparams |= E1000_I2C_CLK_OE_N;
-	E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams);
-	E1000_WRITE_FLUSH(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_read_i2c_byte_generic - Reads 8 bit word over I2C
- *  @hw: pointer to hardware structure
- *  @byte_offset: byte offset to read
- *  @dev_addr: device address
- *  @data: value read
- *
- *  Performs byte read operation over I2C interface at
- *  a specified device address.
- **/
-s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
-				u8 dev_addr, u8 *data)
-{
-	s32 status = E1000_SUCCESS;
-	u32 max_retry = 10;
-	u32 retry = 1;
-	u16 swfw_mask = 0;
-
-	bool nack = true;
-
-	DEBUGFUNC("e1000_read_i2c_byte_generic");
-
-	swfw_mask = E1000_SWFW_PHY0_SM;
-
-	do {
-		if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
-		    != E1000_SUCCESS) {
-			status = E1000_ERR_SWFW_SYNC;
-			goto read_byte_out;
-		}
-
-		e1000_i2c_start(hw);
-
-		/* Device Address and write indication */
-		status = e1000_clock_out_i2c_byte(hw, dev_addr);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_get_i2c_ack(hw);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_clock_out_i2c_byte(hw, byte_offset);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_get_i2c_ack(hw);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		e1000_i2c_start(hw);
-
-		/* Device Address and read indication */
-		status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1));
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_get_i2c_ack(hw);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_clock_in_i2c_byte(hw, data);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_clock_out_i2c_bit(hw, nack);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		e1000_i2c_stop(hw);
-		break;
-
-fail:
-		hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-		msec_delay(100);
-		e1000_i2c_bus_clear(hw);
-		retry++;
-		if (retry < max_retry)
-			DEBUGOUT("I2C byte read error - Retrying.\n");
-		else
-			DEBUGOUT("I2C byte read error.\n");
-
-	} while (retry < max_retry);
-
-	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-
-read_byte_out:
-
-	return status;
-}
-
-/**
- *  e1000_write_i2c_byte_generic - Writes 8 bit word over I2C
- *  @hw: pointer to hardware structure
- *  @byte_offset: byte offset to write
- *  @dev_addr: device address
- *  @data: value to write
- *
- *  Performs byte write operation over I2C interface at
- *  a specified device address.
- **/
-s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
-				 u8 dev_addr, u8 data)
-{
-	s32 status = E1000_SUCCESS;
-	u32 max_retry = 1;
-	u32 retry = 0;
-	u16 swfw_mask = 0;
-
-	DEBUGFUNC("e1000_write_i2c_byte_generic");
-
-	swfw_mask = E1000_SWFW_PHY0_SM;
-
-	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) {
-		status = E1000_ERR_SWFW_SYNC;
-		goto write_byte_out;
-	}
-
-	do {
-		e1000_i2c_start(hw);
-
-		status = e1000_clock_out_i2c_byte(hw, dev_addr);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_get_i2c_ack(hw);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_clock_out_i2c_byte(hw, byte_offset);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_get_i2c_ack(hw);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_clock_out_i2c_byte(hw, data);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		status = e1000_get_i2c_ack(hw);
-		if (status != E1000_SUCCESS)
-			goto fail;
-
-		e1000_i2c_stop(hw);
-		break;
-
-fail:
-		e1000_i2c_bus_clear(hw);
-		retry++;
-		if (retry < max_retry)
-			DEBUGOUT("I2C byte write error - Retrying.\n");
-		else
-			DEBUGOUT("I2C byte write error.\n");
-	} while (retry < max_retry);
-
-	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-
-write_byte_out:
-
-	return status;
-}
-
-/**
- *  e1000_i2c_start - Sets I2C start condition
- *  @hw: pointer to hardware structure
- *
- *  Sets I2C start condition (High -> Low on SDA while SCL is High)
- **/
-static void e1000_i2c_start(struct e1000_hw *hw)
-{
-	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-
-	DEBUGFUNC("e1000_i2c_start");
-
-	/* Start condition must begin with data and clock high */
-	e1000_set_i2c_data(hw, &i2cctl, 1);
-	e1000_raise_i2c_clk(hw, &i2cctl);
-
-	/* Setup time for start condition (4.7us) */
-	usec_delay(E1000_I2C_T_SU_STA);
-
-	e1000_set_i2c_data(hw, &i2cctl, 0);
-
-	/* Hold time for start condition (4us) */
-	usec_delay(E1000_I2C_T_HD_STA);
-
-	e1000_lower_i2c_clk(hw, &i2cctl);
-
-	/* Minimum low period of clock is 4.7 us */
-	usec_delay(E1000_I2C_T_LOW);
-
-}
-
-/**
- *  e1000_i2c_stop - Sets I2C stop condition
- *  @hw: pointer to hardware structure
- *
- *  Sets I2C stop condition (Low -> High on SDA while SCL is High)
- **/
-static void e1000_i2c_stop(struct e1000_hw *hw)
-{
-	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-
-	DEBUGFUNC("e1000_i2c_stop");
-
-	/* Stop condition must begin with data low and clock high */
-	e1000_set_i2c_data(hw, &i2cctl, 0);
-	e1000_raise_i2c_clk(hw, &i2cctl);
-
-	/* Setup time for stop condition (4us) */
-	usec_delay(E1000_I2C_T_SU_STO);
-
-	e1000_set_i2c_data(hw, &i2cctl, 1);
-
-	/* bus free time between stop and start (4.7us)*/
-	usec_delay(E1000_I2C_T_BUF);
-}
-
-/**
- *  e1000_clock_in_i2c_byte - Clocks in one byte via I2C
- *  @hw: pointer to hardware structure
- *  @data: data byte to clock in
- *
- *  Clocks in one byte data via I2C data/clock
- **/
-static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data)
-{
-	s32 i;
-	bool bit = 0;
-
-	DEBUGFUNC("e1000_clock_in_i2c_byte");
-
-	*data = 0;
-	for (i = 7; i >= 0; i--) {
-		e1000_clock_in_i2c_bit(hw, &bit);
-		*data |= bit << i;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_clock_out_i2c_byte - Clocks out one byte via I2C
- *  @hw: pointer to hardware structure
- *  @data: data byte clocked out
- *
- *  Clocks out one byte data via I2C data/clock
- **/
-static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data)
-{
-	s32 status = E1000_SUCCESS;
-	s32 i;
-	u32 i2cctl;
-	bool bit = 0;
-
-	DEBUGFUNC("e1000_clock_out_i2c_byte");
-
-	for (i = 7; i >= 0; i--) {
-		bit = (data >> i) & 0x1;
-		status = e1000_clock_out_i2c_bit(hw, bit);
-
-		if (status != E1000_SUCCESS)
-			break;
-	}
-
-	/* Release SDA line (set high) */
-	i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-
-	i2cctl |= E1000_I2C_DATA_OE_N;
-	E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl);
-	E1000_WRITE_FLUSH(hw);
-
-	return status;
-}
-
-/**
- *  e1000_get_i2c_ack - Polls for I2C ACK
- *  @hw: pointer to hardware structure
- *
- *  Clocks in/out one bit via I2C data/clock
- **/
-static s32 e1000_get_i2c_ack(struct e1000_hw *hw)
-{
-	s32 status = E1000_SUCCESS;
-	u32 i = 0;
-	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-	u32 timeout = 10;
-	bool ack = true;
-
-	DEBUGFUNC("e1000_get_i2c_ack");
-
-	e1000_raise_i2c_clk(hw, &i2cctl);
-
-	/* Minimum high period of clock is 4us */
-	usec_delay(E1000_I2C_T_HIGH);
-
-	/* Wait until SCL returns high */
-	for (i = 0; i < timeout; i++) {
-		usec_delay(1);
-		i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-		if (i2cctl & E1000_I2C_CLK_IN)
-			break;
-	}
-	if (!(i2cctl & E1000_I2C_CLK_IN))
-		return E1000_ERR_I2C;
-
-	ack = e1000_get_i2c_data(&i2cctl);
-	if (ack) {
-		DEBUGOUT("I2C ack was not received.\n");
-		status = E1000_ERR_I2C;
-	}
-
-	e1000_lower_i2c_clk(hw, &i2cctl);
-
-	/* Minimum low period of clock is 4.7 us */
-	usec_delay(E1000_I2C_T_LOW);
-
-	return status;
-}
-
-/**
- *  e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
- *  @hw: pointer to hardware structure
- *  @data: read data value
- *
- *  Clocks in one bit via I2C data/clock
- **/
-static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data)
-{
-	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-
-	DEBUGFUNC("e1000_clock_in_i2c_bit");
-
-	e1000_raise_i2c_clk(hw, &i2cctl);
-
-	/* Minimum high period of clock is 4us */
-	usec_delay(E1000_I2C_T_HIGH);
-
-	i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-	*data = e1000_get_i2c_data(&i2cctl);
-
-	e1000_lower_i2c_clk(hw, &i2cctl);
-
-	/* Minimum low period of clock is 4.7 us */
-	usec_delay(E1000_I2C_T_LOW);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
- *  @hw: pointer to hardware structure
- *  @data: data value to write
- *
- *  Clocks out one bit via I2C data/clock
- **/
-static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data)
-{
-	s32 status;
-	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-
-	DEBUGFUNC("e1000_clock_out_i2c_bit");
-
-	status = e1000_set_i2c_data(hw, &i2cctl, data);
-	if (status == E1000_SUCCESS) {
-		e1000_raise_i2c_clk(hw, &i2cctl);
-
-		/* Minimum high period of clock is 4us */
-		usec_delay(E1000_I2C_T_HIGH);
-
-		e1000_lower_i2c_clk(hw, &i2cctl);
-
-		/* Minimum low period of clock is 4.7 us.
-		 * This also takes care of the data hold time.
-		 */
-		usec_delay(E1000_I2C_T_LOW);
-	} else {
-		status = E1000_ERR_I2C;
-		DEBUGOUT1("I2C data was not set to %X\n", data);
-	}
-
-	return status;
-}
-/**
- *  e1000_raise_i2c_clk - Raises the I2C SCL clock
- *  @hw: pointer to hardware structure
- *  @i2cctl: Current value of I2CCTL register
- *
- *  Raises the I2C clock line '0'->'1'
- **/
-static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl)
-{
-	DEBUGFUNC("e1000_raise_i2c_clk");
-
-	*i2cctl |= E1000_I2C_CLK_OUT;
-	*i2cctl &= ~E1000_I2C_CLK_OE_N;
-	E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl);
-	E1000_WRITE_FLUSH(hw);
-
-	/* SCL rise time (1000ns) */
-	usec_delay(E1000_I2C_T_RISE);
-}
-
-/**
- *  e1000_lower_i2c_clk - Lowers the I2C SCL clock
- *  @hw: pointer to hardware structure
- *  @i2cctl: Current value of I2CCTL register
- *
- *  Lowers the I2C clock line '1'->'0'
- **/
-static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl)
-{
-
-	DEBUGFUNC("e1000_lower_i2c_clk");
-
-	*i2cctl &= ~E1000_I2C_CLK_OUT;
-	*i2cctl &= ~E1000_I2C_CLK_OE_N;
-	E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl);
-	E1000_WRITE_FLUSH(hw);
-
-	/* SCL fall time (300ns) */
-	usec_delay(E1000_I2C_T_FALL);
-}
-
-/**
- *  e1000_set_i2c_data - Sets the I2C data bit
- *  @hw: pointer to hardware structure
- *  @i2cctl: Current value of I2CCTL register
- *  @data: I2C data value (0 or 1) to set
- *
- *  Sets the I2C data bit
- **/
-static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data)
-{
-	s32 status = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_set_i2c_data");
-
-	if (data)
-		*i2cctl |= E1000_I2C_DATA_OUT;
-	else
-		*i2cctl &= ~E1000_I2C_DATA_OUT;
-
-	*i2cctl &= ~E1000_I2C_DATA_OE_N;
-	*i2cctl |= E1000_I2C_CLK_OE_N;
-	E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl);
-	E1000_WRITE_FLUSH(hw);
-
-	/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
-	usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA);
-
-	*i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-	if (data != e1000_get_i2c_data(i2cctl)) {
-		status = E1000_ERR_I2C;
-		DEBUGOUT1("Error - I2C data was not set to %X.\n", data);
-	}
-
-	return status;
-}
-
-/**
- *  e1000_get_i2c_data - Reads the I2C SDA data bit
- *  @hw: pointer to hardware structure
- *  @i2cctl: Current value of I2CCTL register
- *
- *  Returns the I2C data bit value
- **/
-static bool e1000_get_i2c_data(u32 *i2cctl)
-{
-	bool data;
-
-	DEBUGFUNC("e1000_get_i2c_data");
-
-	if (*i2cctl & E1000_I2C_DATA_IN)
-		data = 1;
-	else
-		data = 0;
-
-	return data;
-}
-
-/**
- *  e1000_i2c_bus_clear - Clears the I2C bus
- *  @hw: pointer to hardware structure
- *
- *  Clears the I2C bus by sending nine clock pulses.
- *  Used when data line is stuck low.
- **/
-void e1000_i2c_bus_clear(struct e1000_hw *hw)
-{
-	u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS);
-	u32 i;
-
-	DEBUGFUNC("e1000_i2c_bus_clear");
-
-	e1000_i2c_start(hw);
-
-	e1000_set_i2c_data(hw, &i2cctl, 1);
-
-	for (i = 0; i < 9; i++) {
-		e1000_raise_i2c_clk(hw, &i2cctl);
-
-		/* Min high period of clock is 4us */
-		usec_delay(E1000_I2C_T_HIGH);
-
-		e1000_lower_i2c_clk(hw, &i2cctl);
-
-		/* Min low period of clock is 4.7us*/
-		usec_delay(E1000_I2C_T_LOW);
-	}
-
-	e1000_i2c_start(hw);
-
-	/* Put the i2c bus back to default state */
-	e1000_i2c_stop(hw);
-}
-
-static const u8 e1000_emc_temp_data[4] = {
-	E1000_EMC_INTERNAL_DATA,
-	E1000_EMC_DIODE1_DATA,
-	E1000_EMC_DIODE2_DATA,
-	E1000_EMC_DIODE3_DATA
-};
-static const u8 e1000_emc_therm_limit[4] = {
-	E1000_EMC_INTERNAL_THERM_LIMIT,
-	E1000_EMC_DIODE1_THERM_LIMIT,
-	E1000_EMC_DIODE2_THERM_LIMIT,
-	E1000_EMC_DIODE3_THERM_LIMIT
-};
-
-/**
- *  e1000_get_thermal_sensor_data_generic - Gathers thermal sensor data
- *  @hw: pointer to hardware structure
- *
- *  Updates the temperatures in mac.thermal_sensor_data
- **/
-s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw)
-{
-	s32 status = E1000_SUCCESS;
-	u16 ets_offset;
-	u16 ets_cfg;
-	u16 ets_sensor;
-	u8  num_sensors;
-	u8  sensor_index;
-	u8  sensor_location;
-	u8  i;
-	struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
-
-	DEBUGFUNC("e1000_get_thermal_sensor_data_generic");
-
-	if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
-		return E1000_NOT_IMPLEMENTED;
-
-	data->sensor[0].temp = (E1000_READ_REG(hw, E1000_THMJT) & 0xFF);
-
-	/* Return the internal sensor only if ETS is unsupported */
-	e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset);
-	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
-		return status;
-
-	e1000_read_nvm(hw, ets_offset, 1, &ets_cfg);
-	if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
-	    != NVM_ETS_TYPE_EMC)
-		return E1000_NOT_IMPLEMENTED;
-
-	num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
-	if (num_sensors > E1000_MAX_SENSORS)
-		num_sensors = E1000_MAX_SENSORS;
-
-	for (i = 1; i < num_sensors; i++) {
-		e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor);
-		sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
-				NVM_ETS_DATA_INDEX_SHIFT);
-		sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
-				   NVM_ETS_DATA_LOC_SHIFT);
-
-		if (sensor_location != 0)
-			hw->phy.ops.read_i2c_byte(hw,
-					e1000_emc_temp_data[sensor_index],
-					E1000_I2C_THERMAL_SENSOR_ADDR,
-					&data->sensor[i].temp);
-	}
-	return status;
-}
-
-/**
- *  e1000_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
- *  @hw: pointer to hardware structure
- *
- *  Sets the thermal sensor thresholds according to the NVM map
- *  and save off the threshold and location values into mac.thermal_sensor_data
- **/
-s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
-{
-	s32 status = E1000_SUCCESS;
-	u16 ets_offset;
-	u16 ets_cfg;
-	u16 ets_sensor;
-	u8  low_thresh_delta;
-	u8  num_sensors;
-	u8  sensor_index;
-	u8  sensor_location;
-	u8  therm_limit;
-	u8  i;
-	struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
-
-	DEBUGFUNC("e1000_init_thermal_sensor_thresh_generic");
-
-	if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
-		return E1000_NOT_IMPLEMENTED;
-
-	memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
-
-	data->sensor[0].location = 0x1;
-	data->sensor[0].caution_thresh =
-		(E1000_READ_REG(hw, E1000_THHIGHTC) & 0xFF);
-	data->sensor[0].max_op_thresh =
-		(E1000_READ_REG(hw, E1000_THLOWTC) & 0xFF);
-
-	/* Return the internal sensor only if ETS is unsupported */
-	e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset);
-	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
-		return status;
-
-	e1000_read_nvm(hw, ets_offset, 1, &ets_cfg);
-	if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
-	    != NVM_ETS_TYPE_EMC)
-		return E1000_NOT_IMPLEMENTED;
-
-	low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
-			    NVM_ETS_LTHRES_DELTA_SHIFT);
-	num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
-
-	for (i = 1; i <= num_sensors; i++) {
-		e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor);
-		sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
-				NVM_ETS_DATA_INDEX_SHIFT);
-		sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
-				   NVM_ETS_DATA_LOC_SHIFT);
-		therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
-
-		hw->phy.ops.write_i2c_byte(hw,
-			e1000_emc_therm_limit[sensor_index],
-			E1000_I2C_THERMAL_SENSOR_ADDR,
-			therm_limit);
-
-		if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
-			data->sensor[i].location = sensor_location;
-			data->sensor[i].caution_thresh = therm_limit;
-			data->sensor[i].max_op_thresh = therm_limit -
-							low_thresh_delta;
-		}
-	}
-	return status;
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.h b/kernel/linux/kni/ethtool/igb/e1000_82575.h
deleted file mode 100644
index 2e0dbb2fb..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_82575.h
+++ /dev/null
@@ -1,494 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_82575_H_
-#define _E1000_82575_H_
-
-#define ID_LED_DEFAULT_82575_SERDES	((ID_LED_DEF1_DEF2 << 12) | \
-					 (ID_LED_DEF1_DEF2 <<  8) | \
-					 (ID_LED_DEF1_DEF2 <<  4) | \
-					 (ID_LED_OFF1_ON2))
-/*
- * Receive Address Register Count
- * Number of high/low register pairs in the RAR.  The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor.
- * These entries are also used for MAC-based filtering.
- */
-/*
- * For 82576, there are an additional set of RARs that begin at an offset
- * separate from the first set of RARs.
- */
-#define E1000_RAR_ENTRIES_82575	16
-#define E1000_RAR_ENTRIES_82576	24
-#define E1000_RAR_ENTRIES_82580	24
-#define E1000_RAR_ENTRIES_I350	32
-#define E1000_SW_SYNCH_MB	0x00000100
-#define E1000_STAT_DEV_RST_SET	0x00100000
-#define E1000_CTRL_DEV_RST	0x20000000
-
-struct e1000_adv_data_desc {
-	__le64 buffer_addr;    /* Address of the descriptor's data buffer */
-	union {
-		u32 data;
-		struct {
-			u32 datalen:16; /* Data buffer length */
-			u32 rsvd:4;
-			u32 dtyp:4;  /* Descriptor type */
-			u32 dcmd:8;  /* Descriptor command */
-		} config;
-	} lower;
-	union {
-		u32 data;
-		struct {
-			u32 status:4;  /* Descriptor status */
-			u32 idx:4;
-			u32 popts:6;  /* Packet Options */
-			u32 paylen:18; /* Payload length */
-		} options;
-	} upper;
-};
-
-#define E1000_TXD_DTYP_ADV_C	0x2  /* Advanced Context Descriptor */
-#define E1000_TXD_DTYP_ADV_D	0x3  /* Advanced Data Descriptor */
-#define E1000_ADV_TXD_CMD_DEXT	0x20 /* Descriptor extension (0 = legacy) */
-#define E1000_ADV_TUCMD_IPV4	0x2  /* IP Packet Type: 1=IPv4 */
-#define E1000_ADV_TUCMD_IPV6	0x0  /* IP Packet Type: 0=IPv6 */
-#define E1000_ADV_TUCMD_L4T_UDP	0x0  /* L4 Packet TYPE of UDP */
-#define E1000_ADV_TUCMD_L4T_TCP	0x4  /* L4 Packet TYPE of TCP */
-#define E1000_ADV_TUCMD_MKRREQ	0x10 /* Indicates markers are required */
-#define E1000_ADV_DCMD_EOP	0x1  /* End of Packet */
-#define E1000_ADV_DCMD_IFCS	0x2  /* Insert FCS (Ethernet CRC) */
-#define E1000_ADV_DCMD_RS	0x8  /* Report Status */
-#define E1000_ADV_DCMD_VLE	0x40 /* Add VLAN tag */
-#define E1000_ADV_DCMD_TSE	0x80 /* TCP Seg enable */
-/* Extended Device Control */
-#define E1000_CTRL_EXT_NSICR	0x00000001 /* Disable Intr Clear all on read */
-
-struct e1000_adv_context_desc {
-	union {
-		u32 ip_config;
-		struct {
-			u32 iplen:9;
-			u32 maclen:7;
-			u32 vlan_tag:16;
-		} fields;
-	} ip_setup;
-	u32 seq_num;
-	union {
-		u64 l4_config;
-		struct {
-			u32 mkrloc:9;
-			u32 tucmd:11;
-			u32 dtyp:4;
-			u32 adv:8;
-			u32 rsvd:4;
-			u32 idx:4;
-			u32 l4len:8;
-			u32 mss:16;
-		} fields;
-	} l4_setup;
-};
-
-/* SRRCTL bit definitions */
-#define E1000_SRRCTL_BSIZEPKT_SHIFT		10 /* Shift _right_ */
-#define E1000_SRRCTL_BSIZEHDRSIZE_MASK		0x00000F00
-#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT		2  /* Shift _left_ */
-#define E1000_SRRCTL_DESCTYPE_LEGACY		0x00000000
-#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF	0x02000000
-#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT		0x04000000
-#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS	0x0A000000
-#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION	0x06000000
-#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
-#define E1000_SRRCTL_DESCTYPE_MASK		0x0E000000
-#define E1000_SRRCTL_TIMESTAMP			0x40000000
-#define E1000_SRRCTL_DROP_EN			0x80000000
-
-#define E1000_SRRCTL_BSIZEPKT_MASK		0x0000007F
-#define E1000_SRRCTL_BSIZEHDR_MASK		0x00003F00
-
-#define E1000_TX_HEAD_WB_ENABLE		0x1
-#define E1000_TX_SEQNUM_WB_ENABLE	0x2
-
-#define E1000_MRQC_ENABLE_RSS_4Q		0x00000002
-#define E1000_MRQC_ENABLE_VMDQ			0x00000003
-#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q		0x00000005
-#define E1000_MRQC_RSS_FIELD_IPV4_UDP		0x00400000
-#define E1000_MRQC_RSS_FIELD_IPV6_UDP		0x00800000
-#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX	0x01000000
-#define E1000_MRQC_ENABLE_RSS_8Q		0x00000002
-
-#define E1000_VMRCTL_MIRROR_PORT_SHIFT		8
-#define E1000_VMRCTL_MIRROR_DSTPORT_MASK	(7 << \
-						 E1000_VMRCTL_MIRROR_PORT_SHIFT)
-#define E1000_VMRCTL_POOL_MIRROR_ENABLE		(1 << 0)
-#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE	(1 << 1)
-#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE	(1 << 2)
-
-#define E1000_EICR_TX_QUEUE ( \
-	E1000_EICR_TX_QUEUE0 |    \
-	E1000_EICR_TX_QUEUE1 |    \
-	E1000_EICR_TX_QUEUE2 |    \
-	E1000_EICR_TX_QUEUE3)
-
-#define E1000_EICR_RX_QUEUE ( \
-	E1000_EICR_RX_QUEUE0 |    \
-	E1000_EICR_RX_QUEUE1 |    \
-	E1000_EICR_RX_QUEUE2 |    \
-	E1000_EICR_RX_QUEUE3)
-
-#define E1000_EIMS_RX_QUEUE	E1000_EICR_RX_QUEUE
-#define E1000_EIMS_TX_QUEUE	E1000_EICR_TX_QUEUE
-
-#define EIMS_ENABLE_MASK ( \
-	E1000_EIMS_RX_QUEUE  | \
-	E1000_EIMS_TX_QUEUE  | \
-	E1000_EIMS_TCP_TIMER | \
-	E1000_EIMS_OTHER)
-
-/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
-#define E1000_IMIR_PORT_IM_EN	0x00010000  /* TCP port enable */
-#define E1000_IMIR_PORT_BP	0x00020000  /* TCP port check bypass */
-#define E1000_IMIREXT_SIZE_BP	0x00001000  /* Packet size bypass */
-#define E1000_IMIREXT_CTRL_URG	0x00002000  /* Check URG bit in header */
-#define E1000_IMIREXT_CTRL_ACK	0x00004000  /* Check ACK bit in header */
-#define E1000_IMIREXT_CTRL_PSH	0x00008000  /* Check PSH bit in header */
-#define E1000_IMIREXT_CTRL_RST	0x00010000  /* Check RST bit in header */
-#define E1000_IMIREXT_CTRL_SYN	0x00020000  /* Check SYN bit in header */
-#define E1000_IMIREXT_CTRL_FIN	0x00040000  /* Check FIN bit in header */
-#define E1000_IMIREXT_CTRL_BP	0x00080000  /* Bypass check of ctrl bits */
-
-/* Receive Descriptor - Advanced */
-union e1000_adv_rx_desc {
-	struct {
-		__le64 pkt_addr; /* Packet buffer address */
-		__le64 hdr_addr; /* Header buffer address */
-	} read;
-	struct {
-		struct {
-			union {
-				__le32 data;
-				struct {
-					__le16 pkt_info; /*RSS type, Pkt type*/
-					/* Split Header, header buffer len */
-					__le16 hdr_info;
-				} hs_rss;
-			} lo_dword;
-			union {
-				__le32 rss; /* RSS Hash */
-				struct {
-					__le16 ip_id; /* IP id */
-					__le16 csum; /* Packet Checksum */
-				} csum_ip;
-			} hi_dword;
-		} lower;
-		struct {
-			__le32 status_error; /* ext status/error */
-			__le16 length; /* Packet length */
-			__le16 vlan; /* VLAN tag */
-		} upper;
-	} wb;  /* writeback */
-};
-
-#define E1000_RXDADV_RSSTYPE_MASK	0x0000000F
-#define E1000_RXDADV_RSSTYPE_SHIFT	12
-#define E1000_RXDADV_HDRBUFLEN_MASK	0x7FE0
-#define E1000_RXDADV_HDRBUFLEN_SHIFT	5
-#define E1000_RXDADV_SPLITHEADER_EN	0x00001000
-#define E1000_RXDADV_SPH		0x8000
-#define E1000_RXDADV_STAT_TS		0x10000 /* Pkt was time stamped */
-#define E1000_RXDADV_STAT_TSIP		0x08000 /* timestamp in packet */
-#define E1000_RXDADV_ERR_HBO		0x00800000
-
-/* RSS Hash results */
-#define E1000_RXDADV_RSSTYPE_NONE	0x00000000
-#define E1000_RXDADV_RSSTYPE_IPV4_TCP	0x00000001
-#define E1000_RXDADV_RSSTYPE_IPV4	0x00000002
-#define E1000_RXDADV_RSSTYPE_IPV6_TCP	0x00000003
-#define E1000_RXDADV_RSSTYPE_IPV6_EX	0x00000004
-#define E1000_RXDADV_RSSTYPE_IPV6	0x00000005
-#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
-#define E1000_RXDADV_RSSTYPE_IPV4_UDP	0x00000007
-#define E1000_RXDADV_RSSTYPE_IPV6_UDP	0x00000008
-#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
-
-/* RSS Packet Types as indicated in the receive descriptor */
-#define E1000_RXDADV_PKTTYPE_NONE	0x00000000
-#define E1000_RXDADV_PKTTYPE_IPV4	0x00000010 /* IPV4 hdr present */
-#define E1000_RXDADV_PKTTYPE_IPV4_EX	0x00000020 /* IPV4 hdr + extensions */
-#define E1000_RXDADV_PKTTYPE_IPV6	0x00000040 /* IPV6 hdr present */
-#define E1000_RXDADV_PKTTYPE_IPV6_EX	0x00000080 /* IPV6 hdr + extensions */
-#define E1000_RXDADV_PKTTYPE_TCP	0x00000100 /* TCP hdr present */
-#define E1000_RXDADV_PKTTYPE_UDP	0x00000200 /* UDP hdr present */
-#define E1000_RXDADV_PKTTYPE_SCTP	0x00000400 /* SCTP hdr present */
-#define E1000_RXDADV_PKTTYPE_NFS	0x00000800 /* NFS hdr present */
-
-#define E1000_RXDADV_PKTTYPE_IPSEC_ESP	0x00001000 /* IPSec ESP */
-#define E1000_RXDADV_PKTTYPE_IPSEC_AH	0x00002000 /* IPSec AH */
-#define E1000_RXDADV_PKTTYPE_LINKSEC	0x00004000 /* LinkSec Encap */
-#define E1000_RXDADV_PKTTYPE_ETQF	0x00008000 /* PKTTYPE is ETQF index */
-#define E1000_RXDADV_PKTTYPE_ETQF_MASK	0x00000070 /* ETQF has 8 indices */
-#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT	4 /* Right-shift 4 bits */
-
-/* LinkSec results */
-/* Security Processing bit Indication */
-#define E1000_RXDADV_LNKSEC_STATUS_SECP		0x00020000
-#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK	0x18000000
-#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH	0x08000000
-#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR	0x10000000
-#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG	0x18000000
-
-#define E1000_RXDADV_IPSEC_STATUS_SECP			0x00020000
-#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK		0x18000000
-#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL	0x08000000
-#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH		0x10000000
-#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED	0x18000000
-
-/* Transmit Descriptor - Advanced */
-union e1000_adv_tx_desc {
-	struct {
-		__le64 buffer_addr;    /* Address of descriptor's data buf */
-		__le32 cmd_type_len;
-		__le32 olinfo_status;
-	} read;
-	struct {
-		__le64 rsvd;       /* Reserved */
-		__le32 nxtseq_seed;
-		__le32 status;
-	} wb;
-};
-
-/* Adv Transmit Descriptor Config Masks */
-#define E1000_ADVTXD_DTYP_CTXT	0x00200000 /* Advanced Context Descriptor */
-#define E1000_ADVTXD_DTYP_DATA	0x00300000 /* Advanced Data Descriptor */
-#define E1000_ADVTXD_DCMD_EOP	0x01000000 /* End of Packet */
-#define E1000_ADVTXD_DCMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_ADVTXD_DCMD_RS	0x08000000 /* Report Status */
-#define E1000_ADVTXD_DCMD_DDTYP_ISCSI	0x10000000 /* DDP hdr type or iSCSI */
-#define E1000_ADVTXD_DCMD_DEXT	0x20000000 /* Descriptor extension (1=Adv) */
-#define E1000_ADVTXD_DCMD_VLE	0x40000000 /* VLAN pkt enable */
-#define E1000_ADVTXD_DCMD_TSE	0x80000000 /* TCP Seg enable */
-#define E1000_ADVTXD_MAC_LINKSEC	0x00040000 /* Apply LinkSec on pkt */
-#define E1000_ADVTXD_MAC_TSTAMP		0x00080000 /* IEEE1588 Timestamp pkt */
-#define E1000_ADVTXD_STAT_SN_CRC	0x00000002 /* NXTSEQ/SEED prsnt in WB */
-#define E1000_ADVTXD_IDX_SHIFT		4  /* Adv desc Index shift */
-#define E1000_ADVTXD_POPTS_ISCO_1ST	0x00000000 /* 1st TSO of iSCSI PDU */
-#define E1000_ADVTXD_POPTS_ISCO_MDL	0x00000800 /* Middle TSO of iSCSI PDU */
-#define E1000_ADVTXD_POPTS_ISCO_LAST	0x00001000 /* Last TSO of iSCSI PDU */
-/* 1st & Last TSO-full iSCSI PDU*/
-#define E1000_ADVTXD_POPTS_ISCO_FULL	0x00001800
-#define E1000_ADVTXD_POPTS_IPSEC	0x00000400 /* IPSec offload request */
-#define E1000_ADVTXD_PAYLEN_SHIFT	14 /* Adv desc PAYLEN shift */
-
-/* Context descriptors */
-struct e1000_adv_tx_context_desc {
-	__le32 vlan_macip_lens;
-	__le32 seqnum_seed;
-	__le32 type_tucmd_mlhl;
-	__le32 mss_l4len_idx;
-};
-
-#define E1000_ADVTXD_MACLEN_SHIFT	9  /* Adv ctxt desc mac len shift */
-#define E1000_ADVTXD_VLAN_SHIFT		16  /* Adv ctxt vlan tag shift */
-#define E1000_ADVTXD_TUCMD_IPV4		0x00000400  /* IP Packet Type: 1=IPv4 */
-#define E1000_ADVTXD_TUCMD_IPV6		0x00000000  /* IP Packet Type: 0=IPv6 */
-#define E1000_ADVTXD_TUCMD_L4T_UDP	0x00000000  /* L4 Packet TYPE of UDP */
-#define E1000_ADVTXD_TUCMD_L4T_TCP	0x00000800  /* L4 Packet TYPE of TCP */
-#define E1000_ADVTXD_TUCMD_L4T_SCTP	0x00001000  /* L4 Packet TYPE of SCTP */
-#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP	0x00002000 /* IPSec Type ESP */
-/* IPSec Encrypt Enable for ESP */
-#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN	0x00004000
-/* Req requires Markers and CRC */
-#define E1000_ADVTXD_TUCMD_MKRREQ	0x00002000
-#define E1000_ADVTXD_L4LEN_SHIFT	8  /* Adv ctxt L4LEN shift */
-#define E1000_ADVTXD_MSS_SHIFT		16  /* Adv ctxt MSS shift */
-/* Adv ctxt IPSec SA IDX mask */
-#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK	0x000000FF
-/* Adv ctxt IPSec ESP len mask */
-#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK		0x000000FF
-
-/* Additional Transmit Descriptor Control definitions */
-#define E1000_TXDCTL_QUEUE_ENABLE	0x02000000 /* Ena specific Tx Queue */
-#define E1000_TXDCTL_SWFLSH		0x04000000 /* Tx Desc. wbk flushing */
-/* Tx Queue Arbitration Priority 0=low, 1=high */
-#define E1000_TXDCTL_PRIORITY		0x08000000
-
-/* Additional Receive Descriptor Control definitions */
-#define E1000_RXDCTL_QUEUE_ENABLE	0x02000000 /* Ena specific Rx Queue */
-#define E1000_RXDCTL_SWFLSH		0x04000000 /* Rx Desc. wbk flushing */
-
-/* Direct Cache Access (DCA) definitions */
-#define E1000_DCA_CTRL_DCA_ENABLE	0x00000000 /* DCA Enable */
-#define E1000_DCA_CTRL_DCA_DISABLE	0x00000001 /* DCA Disable */
-
-#define E1000_DCA_CTRL_DCA_MODE_CB1	0x00 /* DCA Mode CB1 */
-#define E1000_DCA_CTRL_DCA_MODE_CB2	0x02 /* DCA Mode CB2 */
-
-#define E1000_DCA_RXCTRL_CPUID_MASK	0x0000001F /* Rx CPUID Mask */
-#define E1000_DCA_RXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Rx Desc enable */
-#define E1000_DCA_RXCTRL_HEAD_DCA_EN	(1 << 6) /* DCA Rx Desc header ena */
-#define E1000_DCA_RXCTRL_DATA_DCA_EN	(1 << 7) /* DCA Rx Desc payload ena */
-#define E1000_DCA_RXCTRL_DESC_RRO_EN	(1 << 9) /* DCA Rx Desc Relax Order */
-
-#define E1000_DCA_TXCTRL_CPUID_MASK	0x0000001F /* Tx CPUID Mask */
-#define E1000_DCA_TXCTRL_DESC_DCA_EN	(1 << 5) /* DCA Tx Desc enable */
-#define E1000_DCA_TXCTRL_DESC_RRO_EN	(1 << 9) /* Tx rd Desc Relax Order */
-#define E1000_DCA_TXCTRL_TX_WB_RO_EN	(1 << 11) /* Tx Desc writeback RO bit */
-#define E1000_DCA_TXCTRL_DATA_RRO_EN	(1 << 13) /* Tx rd data Relax Order */
-
-#define E1000_DCA_TXCTRL_CPUID_MASK_82576	0xFF000000 /* Tx CPUID Mask */
-#define E1000_DCA_RXCTRL_CPUID_MASK_82576	0xFF000000 /* Rx CPUID Mask */
-#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576	24 /* Tx CPUID */
-#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576	24 /* Rx CPUID */
-
-/* Additional interrupt register bit definitions */
-#define E1000_ICR_LSECPNS	0x00000020 /* PN threshold - server */
-#define E1000_IMS_LSECPNS	E1000_ICR_LSECPNS /* PN threshold - server */
-#define E1000_ICS_LSECPNS	E1000_ICR_LSECPNS /* PN threshold - server */
-
-/* ETQF register bit definitions */
-#define E1000_ETQF_FILTER_ENABLE	(1 << 26)
-#define E1000_ETQF_IMM_INT		(1 << 29)
-#define E1000_ETQF_1588			(1 << 30)
-#define E1000_ETQF_QUEUE_ENABLE		(1 << 31)
-/*
- * ETQF filter list: one static filter per filter consumer. This is
- *                   to avoid filter collisions later. Add new filters
- *                   here!!
- *
- * Current filters:
- *    EAPOL 802.1x (0x888e): Filter 0
- */
-#define E1000_ETQF_FILTER_EAPOL		0
-
-#define E1000_FTQF_VF_BP		0x00008000
-#define E1000_FTQF_1588_TIME_STAMP	0x08000000
-#define E1000_FTQF_MASK			0xF0000000
-#define E1000_FTQF_MASK_PROTO_BP	0x10000000
-#define E1000_FTQF_MASK_SOURCE_ADDR_BP	0x20000000
-#define E1000_FTQF_MASK_DEST_ADDR_BP	0x40000000
-#define E1000_FTQF_MASK_SOURCE_PORT_BP	0x80000000
-
-#define E1000_NVM_APME_82575		0x0400
-#define MAX_NUM_VFS			7
-
-#define E1000_DTXSWC_MAC_SPOOF_MASK	0x000000FF /* Per VF MAC spoof cntrl */
-#define E1000_DTXSWC_VLAN_SPOOF_MASK	0x0000FF00 /* Per VF VLAN spoof cntrl */
-#define E1000_DTXSWC_LLE_MASK		0x00FF0000 /* Per VF Local LB enables */
-#define E1000_DTXSWC_VLAN_SPOOF_SHIFT	8
-#define E1000_DTXSWC_LLE_SHIFT		16
-#define E1000_DTXSWC_VMDQ_LOOPBACK_EN	(1 << 31)  /* global VF LB enable */
-
-/* Easy defines for setting default pool, would normally be left a zero */
-#define E1000_VT_CTL_DEFAULT_POOL_SHIFT	7
-#define E1000_VT_CTL_DEFAULT_POOL_MASK	(0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
-
-/* Other useful VMD_CTL register defines */
-#define E1000_VT_CTL_IGNORE_MAC		(1 << 28)
-#define E1000_VT_CTL_DISABLE_DEF_POOL	(1 << 29)
-#define E1000_VT_CTL_VM_REPL_EN		(1 << 30)
-
-/* Per VM Offload register setup */
-#define E1000_VMOLR_RLPML_MASK	0x00003FFF /* Long Packet Maximum Length mask */
-#define E1000_VMOLR_LPE		0x00010000 /* Accept Long packet */
-#define E1000_VMOLR_RSSE	0x00020000 /* Enable RSS */
-#define E1000_VMOLR_AUPE	0x01000000 /* Accept untagged packets */
-#define E1000_VMOLR_ROMPE	0x02000000 /* Accept overflow multicast */
-#define E1000_VMOLR_ROPE	0x04000000 /* Accept overflow unicast */
-#define E1000_VMOLR_BAM		0x08000000 /* Accept Broadcast packets */
-#define E1000_VMOLR_MPME	0x10000000 /* Multicast promiscuous mode */
-#define E1000_VMOLR_STRVLAN	0x40000000 /* Vlan stripping enable */
-#define E1000_VMOLR_STRCRC	0x80000000 /* CRC stripping enable */
-
-#define E1000_VMOLR_VPE		0x00800000 /* VLAN promiscuous enable */
-#define E1000_VMOLR_UPE		0x20000000 /* Unicast promisuous enable */
-#define E1000_DVMOLR_HIDVLAN	0x20000000 /* Vlan hiding enable */
-#define E1000_DVMOLR_STRVLAN	0x40000000 /* Vlan stripping enable */
-#define E1000_DVMOLR_STRCRC	0x80000000 /* CRC stripping enable */
-
-#define E1000_PBRWAC_WALPB	0x00000007 /* Wrap around event on LAN Rx PB */
-#define E1000_PBRWAC_PBE	0x00000008 /* Rx packet buffer empty */
-
-#define E1000_VLVF_ARRAY_SIZE		32
-#define E1000_VLVF_VLANID_MASK		0x00000FFF
-#define E1000_VLVF_POOLSEL_SHIFT	12
-#define E1000_VLVF_POOLSEL_MASK		(0xFF << E1000_VLVF_POOLSEL_SHIFT)
-#define E1000_VLVF_LVLAN		0x00100000
-#define E1000_VLVF_VLANID_ENABLE	0x80000000
-
-#define E1000_VMVIR_VLANA_DEFAULT	0x40000000 /* Always use default VLAN */
-#define E1000_VMVIR_VLANA_NEVER		0x80000000 /* Never insert VLAN tag */
-
-#define E1000_VF_INIT_TIMEOUT	200 /* Number of retries to clear RSTI */
-
-#define E1000_IOVCTL		0x05BBC
-#define E1000_IOVCTL_REUSE_VFQ	0x00000001
-
-#define E1000_RPLOLR_STRVLAN	0x40000000
-#define E1000_RPLOLR_STRCRC	0x80000000
-
-#define E1000_TCTL_EXT_COLD	0x000FFC00
-#define E1000_TCTL_EXT_COLD_SHIFT	10
-
-#define E1000_DTXCTL_8023LL	0x0004
-#define E1000_DTXCTL_VLAN_ADDED	0x0008
-#define E1000_DTXCTL_OOS_ENABLE	0x0010
-#define E1000_DTXCTL_MDP_EN	0x0020
-#define E1000_DTXCTL_SPOOF_INT	0x0040
-
-#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT	(1 << 14)
-
-#define ALL_QUEUES		0xFFFF
-
-/* Rx packet buffer size defines */
-#define E1000_RXPBS_SIZE_MASK_82576	0x0000007F
-void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable);
-void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf);
-void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable);
-s32 e1000_init_nvm_params_82575(struct e1000_hw *hw);
-
-u16 e1000_rxpbs_adjust_82580(u32 data);
-s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data);
-s32 e1000_set_eee_i350(struct e1000_hw *);
-s32 e1000_set_eee_i354(struct e1000_hw *);
-s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *);
-#define E1000_I2C_THERMAL_SENSOR_ADDR	0xF8
-#define E1000_EMC_INTERNAL_DATA		0x00
-#define E1000_EMC_INTERNAL_THERM_LIMIT	0x20
-#define E1000_EMC_DIODE1_DATA		0x01
-#define E1000_EMC_DIODE1_THERM_LIMIT	0x19
-#define E1000_EMC_DIODE2_DATA		0x23
-#define E1000_EMC_DIODE2_THERM_LIMIT	0x1A
-#define E1000_EMC_DIODE3_DATA		0x2A
-#define E1000_EMC_DIODE3_THERM_LIMIT	0x30
-
-s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw);
-s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw);
-
-/* I2C SDA and SCL timing parameters for standard mode */
-#define E1000_I2C_T_HD_STA	4
-#define E1000_I2C_T_LOW		5
-#define E1000_I2C_T_HIGH	4
-#define E1000_I2C_T_SU_STA	5
-#define E1000_I2C_T_HD_DATA	5
-#define E1000_I2C_T_SU_DATA	1
-#define E1000_I2C_T_RISE	1
-#define E1000_I2C_T_FALL	1
-#define E1000_I2C_T_SU_STO	4
-#define E1000_I2C_T_BUF		5
-
-s32 e1000_set_i2c_bb(struct e1000_hw *hw);
-s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
-				u8 dev_addr, u8 *data);
-s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset,
-				 u8 dev_addr, u8 data);
-void e1000_i2c_bus_clear(struct e1000_hw *hw);
-#endif /* _E1000_82575_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.c b/kernel/linux/kni/ethtool/igb/e1000_api.c
deleted file mode 100644
index 3e54e50ed..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_api.c
+++ /dev/null
@@ -1,1144 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_api.h"
-
-/**
- *  e1000_init_mac_params - Initialize MAC function pointers
- *  @hw: pointer to the HW structure
- *
- *  This function initializes the function pointers for the MAC
- *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
- **/
-s32 e1000_init_mac_params(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	if (hw->mac.ops.init_params) {
-		ret_val = hw->mac.ops.init_params(hw);
-		if (ret_val) {
-			DEBUGOUT("MAC Initialization Error\n");
-			goto out;
-		}
-	} else {
-		DEBUGOUT("mac.init_mac_params was NULL\n");
-		ret_val = -E1000_ERR_CONFIG;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_init_nvm_params - Initialize NVM function pointers
- *  @hw: pointer to the HW structure
- *
- *  This function initializes the function pointers for the NVM
- *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
- **/
-s32 e1000_init_nvm_params(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	if (hw->nvm.ops.init_params) {
-		ret_val = hw->nvm.ops.init_params(hw);
-		if (ret_val) {
-			DEBUGOUT("NVM Initialization Error\n");
-			goto out;
-		}
-	} else {
-		DEBUGOUT("nvm.init_nvm_params was NULL\n");
-		ret_val = -E1000_ERR_CONFIG;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_init_phy_params - Initialize PHY function pointers
- *  @hw: pointer to the HW structure
- *
- *  This function initializes the function pointers for the PHY
- *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
- **/
-s32 e1000_init_phy_params(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	if (hw->phy.ops.init_params) {
-		ret_val = hw->phy.ops.init_params(hw);
-		if (ret_val) {
-			DEBUGOUT("PHY Initialization Error\n");
-			goto out;
-		}
-	} else {
-		DEBUGOUT("phy.init_phy_params was NULL\n");
-		ret_val =  -E1000_ERR_CONFIG;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_init_mbx_params - Initialize mailbox function pointers
- *  @hw: pointer to the HW structure
- *
- *  This function initializes the function pointers for the PHY
- *  set of functions.  Called by drivers or by e1000_setup_init_funcs.
- **/
-s32 e1000_init_mbx_params(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	if (hw->mbx.ops.init_params) {
-		ret_val = hw->mbx.ops.init_params(hw);
-		if (ret_val) {
-			DEBUGOUT("Mailbox Initialization Error\n");
-			goto out;
-		}
-	} else {
-		DEBUGOUT("mbx.init_mbx_params was NULL\n");
-		ret_val =  -E1000_ERR_CONFIG;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_set_mac_type - Sets MAC type
- *  @hw: pointer to the HW structure
- *
- *  This function sets the mac type of the adapter based on the
- *  device ID stored in the hw structure.
- *  MUST BE FIRST FUNCTION CALLED (explicitly or through
- *  e1000_setup_init_funcs()).
- **/
-s32 e1000_set_mac_type(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_set_mac_type");
-
-	switch (hw->device_id) {
-	case E1000_DEV_ID_82575EB_COPPER:
-	case E1000_DEV_ID_82575EB_FIBER_SERDES:
-	case E1000_DEV_ID_82575GB_QUAD_COPPER:
-		mac->type = e1000_82575;
-		break;
-	case E1000_DEV_ID_82576:
-	case E1000_DEV_ID_82576_FIBER:
-	case E1000_DEV_ID_82576_SERDES:
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-	case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
-	case E1000_DEV_ID_82576_NS:
-	case E1000_DEV_ID_82576_NS_SERDES:
-	case E1000_DEV_ID_82576_SERDES_QUAD:
-		mac->type = e1000_82576;
-		break;
-	case E1000_DEV_ID_82580_COPPER:
-	case E1000_DEV_ID_82580_FIBER:
-	case E1000_DEV_ID_82580_SERDES:
-	case E1000_DEV_ID_82580_SGMII:
-	case E1000_DEV_ID_82580_COPPER_DUAL:
-	case E1000_DEV_ID_82580_QUAD_FIBER:
-	case E1000_DEV_ID_DH89XXCC_SGMII:
-	case E1000_DEV_ID_DH89XXCC_SERDES:
-	case E1000_DEV_ID_DH89XXCC_BACKPLANE:
-	case E1000_DEV_ID_DH89XXCC_SFP:
-		mac->type = e1000_82580;
-		break;
-	case E1000_DEV_ID_I350_COPPER:
-	case E1000_DEV_ID_I350_FIBER:
-	case E1000_DEV_ID_I350_SERDES:
-	case E1000_DEV_ID_I350_SGMII:
-	case E1000_DEV_ID_I350_DA4:
-		mac->type = e1000_i350;
-		break;
-	case E1000_DEV_ID_I210_COPPER_FLASHLESS:
-	case E1000_DEV_ID_I210_SERDES_FLASHLESS:
-	case E1000_DEV_ID_I210_COPPER:
-	case E1000_DEV_ID_I210_COPPER_OEM1:
-	case E1000_DEV_ID_I210_COPPER_IT:
-	case E1000_DEV_ID_I210_FIBER:
-	case E1000_DEV_ID_I210_SERDES:
-	case E1000_DEV_ID_I210_SGMII:
-		mac->type = e1000_i210;
-		break;
-	case E1000_DEV_ID_I211_COPPER:
-		mac->type = e1000_i211;
-		break;
-
-	case E1000_DEV_ID_I354_BACKPLANE_1GBPS:
-	case E1000_DEV_ID_I354_SGMII:
-	case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS:
-		mac->type = e1000_i354;
-		break;
-	default:
-		/* Should never have loaded on this device */
-		ret_val = -E1000_ERR_MAC_INIT;
-		break;
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_setup_init_funcs - Initializes function pointers
- *  @hw: pointer to the HW structure
- *  @init_device: true will initialize the rest of the function pointers
- *		  getting the device ready for use.  false will only set
- *		  MAC type and the function pointers for the other init
- *		  functions.  Passing false will not generate any hardware
- *		  reads or writes.
- *
- *  This function must be called by a driver in order to use the rest
- *  of the 'shared' code files. Called by drivers only.
- **/
-s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device)
-{
-	s32 ret_val;
-
-	/* Can't do much good without knowing the MAC type. */
-	ret_val = e1000_set_mac_type(hw);
-	if (ret_val) {
-		DEBUGOUT("ERROR: MAC type could not be set properly.\n");
-		goto out;
-	}
-
-	if (!hw->hw_addr) {
-		DEBUGOUT("ERROR: Registers not mapped\n");
-		ret_val = -E1000_ERR_CONFIG;
-		goto out;
-	}
-
-	/*
-	 * Init function pointers to generic implementations. We do this first
-	 * allowing a driver module to override it afterward.
-	 */
-	e1000_init_mac_ops_generic(hw);
-	e1000_init_phy_ops_generic(hw);
-	e1000_init_nvm_ops_generic(hw);
-	e1000_init_mbx_ops_generic(hw);
-
-	/*
-	 * Set up the init function pointers. These are functions within the
-	 * adapter family file that sets up function pointers for the rest of
-	 * the functions in that family.
-	 */
-	switch (hw->mac.type) {
-	case e1000_82575:
-	case e1000_82576:
-	case e1000_82580:
-	case e1000_i350:
-	case e1000_i354:
-		e1000_init_function_pointers_82575(hw);
-		break;
-	case e1000_i210:
-	case e1000_i211:
-		e1000_init_function_pointers_i210(hw);
-		break;
-	default:
-		DEBUGOUT("Hardware not supported\n");
-		ret_val = -E1000_ERR_CONFIG;
-		break;
-	}
-
-	/*
-	 * Initialize the rest of the function pointers. These require some
-	 * register reads/writes in some cases.
-	 */
-	if (!(ret_val) && init_device) {
-		ret_val = e1000_init_mac_params(hw);
-		if (ret_val)
-			goto out;
-
-		ret_val = e1000_init_nvm_params(hw);
-		if (ret_val)
-			goto out;
-
-		ret_val = e1000_init_phy_params(hw);
-		if (ret_val)
-			goto out;
-
-		ret_val = e1000_init_mbx_params(hw);
-		if (ret_val)
-			goto out;
-	}
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_get_bus_info - Obtain bus information for adapter
- *  @hw: pointer to the HW structure
- *
- *  This will obtain information about the HW bus for which the
- *  adapter is attached and stores it in the hw structure. This is a
- *  function pointer entry point called by drivers.
- **/
-s32 e1000_get_bus_info(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.get_bus_info)
-		return hw->mac.ops.get_bus_info(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_clear_vfta - Clear VLAN filter table
- *  @hw: pointer to the HW structure
- *
- *  This clears the VLAN filter table on the adapter. This is a function
- *  pointer entry point called by drivers.
- **/
-void e1000_clear_vfta(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.clear_vfta)
-		hw->mac.ops.clear_vfta(hw);
-}
-
-/**
- *  e1000_write_vfta - Write value to VLAN filter table
- *  @hw: pointer to the HW structure
- *  @offset: the 32-bit offset in which to write the value to.
- *  @value: the 32-bit value to write at location offset.
- *
- *  This writes a 32-bit value to a 32-bit offset in the VLAN filter
- *  table. This is a function pointer entry point called by drivers.
- **/
-void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
-{
-	if (hw->mac.ops.write_vfta)
-		hw->mac.ops.write_vfta(hw, offset, value);
-}
-
-/**
- *  e1000_update_mc_addr_list - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *
- *  Updates the Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
-			       u32 mc_addr_count)
-{
-	if (hw->mac.ops.update_mc_addr_list)
-		hw->mac.ops.update_mc_addr_list(hw, mc_addr_list,
-						mc_addr_count);
-}
-
-/**
- *  e1000_force_mac_fc - Force MAC flow control
- *  @hw: pointer to the HW structure
- *
- *  Force the MAC's flow control settings. Currently no func pointer exists
- *  and all implementations are handled in the generic version of this
- *  function.
- **/
-s32 e1000_force_mac_fc(struct e1000_hw *hw)
-{
-	return e1000_force_mac_fc_generic(hw);
-}
-
-/**
- *  e1000_check_for_link - Check/Store link connection
- *  @hw: pointer to the HW structure
- *
- *  This checks the link condition of the adapter and stores the
- *  results in the hw->mac structure. This is a function pointer entry
- *  point called by drivers.
- **/
-s32 e1000_check_for_link(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.check_for_link)
-		return hw->mac.ops.check_for_link(hw);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_check_mng_mode - Check management mode
- *  @hw: pointer to the HW structure
- *
- *  This checks if the adapter has manageability enabled.
- *  This is a function pointer entry point called by drivers.
- **/
-bool e1000_check_mng_mode(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.check_mng_mode)
-		return hw->mac.ops.check_mng_mode(hw);
-
-	return false;
-}
-
-/**
- *  e1000_mng_write_dhcp_info - Writes DHCP info to host interface
- *  @hw: pointer to the HW structure
- *  @buffer: pointer to the host interface
- *  @length: size of the buffer
- *
- *  Writes the DHCP information to the host interface.
- **/
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
-{
-	return e1000_mng_write_dhcp_info_generic(hw, buffer, length);
-}
-
-/**
- *  e1000_reset_hw - Reset hardware
- *  @hw: pointer to the HW structure
- *
- *  This resets the hardware into a known state. This is a function pointer
- *  entry point called by drivers.
- **/
-s32 e1000_reset_hw(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.reset_hw)
-		return hw->mac.ops.reset_hw(hw);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_init_hw - Initialize hardware
- *  @hw: pointer to the HW structure
- *
- *  This inits the hardware readying it for operation. This is a function
- *  pointer entry point called by drivers.
- **/
-s32 e1000_init_hw(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.init_hw)
-		return hw->mac.ops.init_hw(hw);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_setup_link - Configures link and flow control
- *  @hw: pointer to the HW structure
- *
- *  This configures link and flow control settings for the adapter. This
- *  is a function pointer entry point called by drivers. While modules can
- *  also call this, they probably call their own version of this function.
- **/
-s32 e1000_setup_link(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.setup_link)
-		return hw->mac.ops.setup_link(hw);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_get_speed_and_duplex - Returns current speed and duplex
- *  @hw: pointer to the HW structure
- *  @speed: pointer to a 16-bit value to store the speed
- *  @duplex: pointer to a 16-bit value to store the duplex.
- *
- *  This returns the speed and duplex of the adapter in the two 'out'
- *  variables passed in. This is a function pointer entry point called
- *  by drivers.
- **/
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
-{
-	if (hw->mac.ops.get_link_up_info)
-		return hw->mac.ops.get_link_up_info(hw, speed, duplex);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_setup_led - Configures SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  This prepares the SW controllable LED for use and saves the current state
- *  of the LED so it can be later restored. This is a function pointer entry
- *  point called by drivers.
- **/
-s32 e1000_setup_led(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.setup_led)
-		return hw->mac.ops.setup_led(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_cleanup_led - Restores SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  This restores the SW controllable LED to the value saved off by
- *  e1000_setup_led. This is a function pointer entry point called by drivers.
- **/
-s32 e1000_cleanup_led(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.cleanup_led)
-		return hw->mac.ops.cleanup_led(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_blink_led - Blink SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  This starts the adapter LED blinking. Request the LED to be setup first
- *  and cleaned up after. This is a function pointer entry point called by
- *  drivers.
- **/
-s32 e1000_blink_led(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.blink_led)
-		return hw->mac.ops.blink_led(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_id_led_init - store LED configurations in SW
- *  @hw: pointer to the HW structure
- *
- *  Initializes the LED config in SW. This is a function pointer entry point
- *  called by drivers.
- **/
-s32 e1000_id_led_init(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.id_led_init)
-		return hw->mac.ops.id_led_init(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_led_on - Turn on SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  Turns the SW defined LED on. This is a function pointer entry point
- *  called by drivers.
- **/
-s32 e1000_led_on(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.led_on)
-		return hw->mac.ops.led_on(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_led_off - Turn off SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  Turns the SW defined LED off. This is a function pointer entry point
- *  called by drivers.
- **/
-s32 e1000_led_off(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.led_off)
-		return hw->mac.ops.led_off(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_reset_adaptive - Reset adaptive IFS
- *  @hw: pointer to the HW structure
- *
- *  Resets the adaptive IFS. Currently no func pointer exists and all
- *  implementations are handled in the generic version of this function.
- **/
-void e1000_reset_adaptive(struct e1000_hw *hw)
-{
-	e1000_reset_adaptive_generic(hw);
-}
-
-/**
- *  e1000_update_adaptive - Update adaptive IFS
- *  @hw: pointer to the HW structure
- *
- *  Updates adapter IFS. Currently no func pointer exists and all
- *  implementations are handled in the generic version of this function.
- **/
-void e1000_update_adaptive(struct e1000_hw *hw)
-{
-	e1000_update_adaptive_generic(hw);
-}
-
-/**
- *  e1000_disable_pcie_master - Disable PCI-Express master access
- *  @hw: pointer to the HW structure
- *
- *  Disables PCI-Express master access and verifies there are no pending
- *  requests. Currently no func pointer exists and all implementations are
- *  handled in the generic version of this function.
- **/
-s32 e1000_disable_pcie_master(struct e1000_hw *hw)
-{
-	return e1000_disable_pcie_master_generic(hw);
-}
-
-/**
- *  e1000_config_collision_dist - Configure collision distance
- *  @hw: pointer to the HW structure
- *
- *  Configures the collision distance to the default value and is used
- *  during link setup.
- **/
-void e1000_config_collision_dist(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.config_collision_dist)
-		hw->mac.ops.config_collision_dist(hw);
-}
-
-/**
- *  e1000_rar_set - Sets a receive address register
- *  @hw: pointer to the HW structure
- *  @addr: address to set the RAR to
- *  @index: the RAR to set
- *
- *  Sets a Receive Address Register (RAR) to the specified address.
- **/
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
-{
-	if (hw->mac.ops.rar_set)
-		hw->mac.ops.rar_set(hw, addr, index);
-}
-
-/**
- *  e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state
- *  @hw: pointer to the HW structure
- *
- *  Ensures that the MDI/MDIX SW state is valid.
- **/
-s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.validate_mdi_setting)
-		return hw->mac.ops.validate_mdi_setting(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_hash_mc_addr - Determines address location in multicast table
- *  @hw: pointer to the HW structure
- *  @mc_addr: Multicast address to hash.
- *
- *  This hashes an address to determine its location in the multicast
- *  table. Currently no func pointer exists and all implementations
- *  are handled in the generic version of this function.
- **/
-u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
-{
-	return e1000_hash_mc_addr_generic(hw, mc_addr);
-}
-
-/**
- *  e1000_enable_tx_pkt_filtering - Enable packet filtering on TX
- *  @hw: pointer to the HW structure
- *
- *  Enables packet filtering on transmit packets if manageability is enabled
- *  and host interface is enabled.
- *  Currently no func pointer exists and all implementations are handled in the
- *  generic version of this function.
- **/
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
-{
-	return e1000_enable_tx_pkt_filtering_generic(hw);
-}
-
-/**
- *  e1000_mng_host_if_write - Writes to the manageability host interface
- *  @hw: pointer to the HW structure
- *  @buffer: pointer to the host interface buffer
- *  @length: size of the buffer
- *  @offset: location in the buffer to write to
- *  @sum: sum of the data (not checksum)
- *
- *  This function writes the buffer content at the offset given on the host if.
- *  It also does alignment considerations to do the writes in most efficient
- *  way.  Also fills up the sum of the buffer in *buffer parameter.
- **/
-s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
-			    u16 offset, u8 *sum)
-{
-	return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum);
-}
-
-/**
- *  e1000_mng_write_cmd_header - Writes manageability command header
- *  @hw: pointer to the HW structure
- *  @hdr: pointer to the host interface command header
- *
- *  Writes the command header after does the checksum calculation.
- **/
-s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
-			       struct e1000_host_mng_command_header *hdr)
-{
-	return e1000_mng_write_cmd_header_generic(hw, hdr);
-}
-
-/**
- *  e1000_mng_enable_host_if - Checks host interface is enabled
- *  @hw: pointer to the HW structure
- *
- *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
- *
- *  This function checks whether the HOST IF is enabled for command operation
- *  and also checks whether the previous command is completed.  It busy waits
- *  in case of previous command is not completed.
- **/
-s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
-{
-	return e1000_mng_enable_host_if_generic(hw);
-}
-
-/**
- *  e1000_check_reset_block - Verifies PHY can be reset
- *  @hw: pointer to the HW structure
- *
- *  Checks if the PHY is in a state that can be reset or if manageability
- *  has it tied up. This is a function pointer entry point called by drivers.
- **/
-s32 e1000_check_reset_block(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.check_reset_block)
-		return hw->phy.ops.check_reset_block(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_phy_reg - Reads PHY register
- *  @hw: pointer to the HW structure
- *  @offset: the register to read
- *  @data: the buffer to store the 16-bit read.
- *
- *  Reads the PHY register and returns the value in data.
- *  This is a function pointer entry point called by drivers.
- **/
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	if (hw->phy.ops.read_reg)
-		return hw->phy.ops.read_reg(hw, offset, data);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_phy_reg - Writes PHY register
- *  @hw: pointer to the HW structure
- *  @offset: the register to write
- *  @data: the value to write.
- *
- *  Writes the PHY register at offset with the value in data.
- *  This is a function pointer entry point called by drivers.
- **/
-s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	if (hw->phy.ops.write_reg)
-		return hw->phy.ops.write_reg(hw, offset, data);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_release_phy - Generic release PHY
- *  @hw: pointer to the HW structure
- *
- *  Return if silicon family does not require a semaphore when accessing the
- *  PHY.
- **/
-void e1000_release_phy(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.release)
-		hw->phy.ops.release(hw);
-}
-
-/**
- *  e1000_acquire_phy - Generic acquire PHY
- *  @hw: pointer to the HW structure
- *
- *  Return success if silicon family does not require a semaphore when
- *  accessing the PHY.
- **/
-s32 e1000_acquire_phy(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.acquire)
-		return hw->phy.ops.acquire(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_kmrn_reg - Reads register using Kumeran interface
- *  @hw: pointer to the HW structure
- *  @offset: the register to read
- *  @data: the location to store the 16-bit value read.
- *
- *  Reads a register out of the Kumeran interface. Currently no func pointer
- *  exists and all implementations are handled in the generic version of
- *  this function.
- **/
-s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	return e1000_read_kmrn_reg_generic(hw, offset, data);
-}
-
-/**
- *  e1000_write_kmrn_reg - Writes register using Kumeran interface
- *  @hw: pointer to the HW structure
- *  @offset: the register to write
- *  @data: the value to write.
- *
- *  Writes a register to the Kumeran interface. Currently no func pointer
- *  exists and all implementations are handled in the generic version of
- *  this function.
- **/
-s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	return e1000_write_kmrn_reg_generic(hw, offset, data);
-}
-
-/**
- *  e1000_get_cable_length - Retrieves cable length estimation
- *  @hw: pointer to the HW structure
- *
- *  This function estimates the cable length and stores them in
- *  hw->phy.min_length and hw->phy.max_length. This is a function pointer
- *  entry point called by drivers.
- **/
-s32 e1000_get_cable_length(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.get_cable_length)
-		return hw->phy.ops.get_cable_length(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_get_phy_info - Retrieves PHY information from registers
- *  @hw: pointer to the HW structure
- *
- *  This function gets some information from various PHY registers and
- *  populates hw->phy values with it. This is a function pointer entry
- *  point called by drivers.
- **/
-s32 e1000_get_phy_info(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.get_info)
-		return hw->phy.ops.get_info(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_phy_hw_reset - Hard PHY reset
- *  @hw: pointer to the HW structure
- *
- *  Performs a hard PHY reset. This is a function pointer entry point called
- *  by drivers.
- **/
-s32 e1000_phy_hw_reset(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.reset)
-		return hw->phy.ops.reset(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_phy_commit - Soft PHY reset
- *  @hw: pointer to the HW structure
- *
- *  Performs a soft PHY reset on those that apply. This is a function pointer
- *  entry point called by drivers.
- **/
-s32 e1000_phy_commit(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.commit)
-		return hw->phy.ops.commit(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_set_d0_lplu_state - Sets low power link up state for D0
- *  @hw: pointer to the HW structure
- *  @active: boolean used to enable/disable lplu
- *
- *  Success returns 0, Failure returns 1
- *
- *  The low power link up (lplu) state is set to the power management level D0
- *  and SmartSpeed is disabled when active is true, else clear lplu for D0
- *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
- *  is used during Dx states where the power conservation is most important.
- *  During driver activity, SmartSpeed should be enabled so performance is
- *  maintained.  This is a function pointer entry point called by drivers.
- **/
-s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
-{
-	if (hw->phy.ops.set_d0_lplu_state)
-		return hw->phy.ops.set_d0_lplu_state(hw, active);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_set_d3_lplu_state - Sets low power link up state for D3
- *  @hw: pointer to the HW structure
- *  @active: boolean used to enable/disable lplu
- *
- *  Success returns 0, Failure returns 1
- *
- *  The low power link up (lplu) state is set to the power management level D3
- *  and SmartSpeed is disabled when active is true, else clear lplu for D3
- *  and enable Smartspeed.  LPLU and Smartspeed are mutually exclusive.  LPLU
- *  is used during Dx states where the power conservation is most important.
- *  During driver activity, SmartSpeed should be enabled so performance is
- *  maintained.  This is a function pointer entry point called by drivers.
- **/
-s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
-{
-	if (hw->phy.ops.set_d3_lplu_state)
-		return hw->phy.ops.set_d3_lplu_state(hw, active);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_mac_addr - Reads MAC address
- *  @hw: pointer to the HW structure
- *
- *  Reads the MAC address out of the adapter and stores it in the HW structure.
- *  Currently no func pointer exists and all implementations are handled in the
- *  generic version of this function.
- **/
-s32 e1000_read_mac_addr(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.read_mac_addr)
-		return hw->mac.ops.read_mac_addr(hw);
-
-	return e1000_read_mac_addr_generic(hw);
-}
-
-/**
- *  e1000_read_pba_string - Read device part number string
- *  @hw: pointer to the HW structure
- *  @pba_num: pointer to device part number
- *  @pba_num_size: size of part number buffer
- *
- *  Reads the product board assembly (PBA) number from the EEPROM and stores
- *  the value in pba_num.
- *  Currently no func pointer exists and all implementations are handled in the
- *  generic version of this function.
- **/
-s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size)
-{
-	return e1000_read_pba_string_generic(hw, pba_num, pba_num_size);
-}
-
-/**
- *  e1000_read_pba_length - Read device part number string length
- *  @hw: pointer to the HW structure
- *  @pba_num_size: size of part number buffer
- *
- *  Reads the product board assembly (PBA) number length from the EEPROM and
- *  stores the value in pba_num.
- *  Currently no func pointer exists and all implementations are handled in the
- *  generic version of this function.
- **/
-s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size)
-{
-	return e1000_read_pba_length_generic(hw, pba_num_size);
-}
-
-/**
- *  e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum
- *  @hw: pointer to the HW structure
- *
- *  Validates the NVM checksum is correct. This is a function pointer entry
- *  point called by drivers.
- **/
-s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
-{
-	if (hw->nvm.ops.validate)
-		return hw->nvm.ops.validate(hw);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum
- *  @hw: pointer to the HW structure
- *
- *  Updates the NVM checksum. Currently no func pointer exists and all
- *  implementations are handled in the generic version of this function.
- **/
-s32 e1000_update_nvm_checksum(struct e1000_hw *hw)
-{
-	if (hw->nvm.ops.update)
-		return hw->nvm.ops.update(hw);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_reload_nvm - Reloads EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
- *  extended control register.
- **/
-void e1000_reload_nvm(struct e1000_hw *hw)
-{
-	if (hw->nvm.ops.reload)
-		hw->nvm.ops.reload(hw);
-}
-
-/**
- *  e1000_read_nvm - Reads NVM (EEPROM)
- *  @hw: pointer to the HW structure
- *  @offset: the word offset to read
- *  @words: number of 16-bit words to read
- *  @data: pointer to the properly sized buffer for the data.
- *
- *  Reads 16-bit chunks of data from the NVM (EEPROM). This is a function
- *  pointer entry point called by drivers.
- **/
-s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	if (hw->nvm.ops.read)
-		return hw->nvm.ops.read(hw, offset, words, data);
-
-	return -E1000_ERR_CONFIG;
-}
-
-/**
- *  e1000_write_nvm - Writes to NVM (EEPROM)
- *  @hw: pointer to the HW structure
- *  @offset: the word offset to read
- *  @words: number of 16-bit words to write
- *  @data: pointer to the properly sized buffer for the data.
- *
- *  Writes 16-bit chunks of data to the NVM (EEPROM). This is a function
- *  pointer entry point called by drivers.
- **/
-s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	if (hw->nvm.ops.write)
-		return hw->nvm.ops.write(hw, offset, words, data);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_8bit_ctrl_reg - Writes 8bit Control register
- *  @hw: pointer to the HW structure
- *  @reg: 32bit register offset
- *  @offset: the register to write
- *  @data: the value to write.
- *
- *  Writes the PHY register at offset with the value in data.
- *  This is a function pointer entry point called by drivers.
- **/
-s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset,
-			      u8 data)
-{
-	return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data);
-}
-
-/**
- * e1000_power_up_phy - Restores link in case of PHY power down
- * @hw: pointer to the HW structure
- *
- * The phy may be powered down to save power, to turn off link when the
- * driver is unloaded, or wake on lan is not enabled (among others).
- **/
-void e1000_power_up_phy(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.power_up)
-		hw->phy.ops.power_up(hw);
-
-	e1000_setup_link(hw);
-}
-
-/**
- * e1000_power_down_phy - Power down PHY
- * @hw: pointer to the HW structure
- *
- * The phy may be powered down to save power, to turn off link when the
- * driver is unloaded, or wake on lan is not enabled (among others).
- **/
-void e1000_power_down_phy(struct e1000_hw *hw)
-{
-	if (hw->phy.ops.power_down)
-		hw->phy.ops.power_down(hw);
-}
-
-/**
- *  e1000_power_up_fiber_serdes_link - Power up serdes link
- *  @hw: pointer to the HW structure
- *
- *  Power on the optics and PCS.
- **/
-void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.power_up_serdes)
-		hw->mac.ops.power_up_serdes(hw);
-}
-
-/**
- *  e1000_shutdown_fiber_serdes_link - Remove link during power down
- *  @hw: pointer to the HW structure
- *
- *  Shutdown the optics and PCS on driver unload.
- **/
-void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.shutdown_serdes)
-		hw->mac.ops.shutdown_serdes(hw);
-}
-
-/**
- *  e1000_get_thermal_sensor_data - Gathers thermal sensor data
- *  @hw: pointer to hardware structure
- *
- *  Updates the temperatures in mac.thermal_sensor_data
- **/
-s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.get_thermal_sensor_data)
-		return hw->mac.ops.get_thermal_sensor_data(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_init_thermal_sensor_thresh - Sets thermal sensor thresholds
- *  @hw: pointer to hardware structure
- *
- *  Sets the thermal sensor thresholds according to the NVM map
- **/
-s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw)
-{
-	if (hw->mac.ops.init_thermal_sensor_thresh)
-		return hw->mac.ops.init_thermal_sensor_thresh(hw);
-
-	return E1000_SUCCESS;
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.h b/kernel/linux/kni/ethtool/igb/e1000_api.h
deleted file mode 100644
index 0bc00acdf..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_api.h
+++ /dev/null
@@ -1,142 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_API_H_
-#define _E1000_API_H_
-
-#include "e1000_hw.h"
-
-extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
-extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw);
-extern void e1000_init_function_pointers_vf(struct e1000_hw *hw);
-extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw);
-extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw);
-extern void e1000_init_function_pointers_i210(struct e1000_hw *hw);
-
-s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr);
-s32 e1000_set_mac_type(struct e1000_hw *hw);
-s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device);
-s32 e1000_init_mac_params(struct e1000_hw *hw);
-s32 e1000_init_nvm_params(struct e1000_hw *hw);
-s32 e1000_init_phy_params(struct e1000_hw *hw);
-s32 e1000_init_mbx_params(struct e1000_hw *hw);
-s32 e1000_get_bus_info(struct e1000_hw *hw);
-void e1000_clear_vfta(struct e1000_hw *hw);
-void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
-s32 e1000_force_mac_fc(struct e1000_hw *hw);
-s32 e1000_check_for_link(struct e1000_hw *hw);
-s32 e1000_reset_hw(struct e1000_hw *hw);
-s32 e1000_init_hw(struct e1000_hw *hw);
-s32 e1000_setup_link(struct e1000_hw *hw);
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-s32 e1000_disable_pcie_master(struct e1000_hw *hw);
-void e1000_config_collision_dist(struct e1000_hw *hw);
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
-u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
-void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
-			       u32 mc_addr_count);
-s32 e1000_setup_led(struct e1000_hw *hw);
-s32 e1000_cleanup_led(struct e1000_hw *hw);
-s32 e1000_check_reset_block(struct e1000_hw *hw);
-s32 e1000_blink_led(struct e1000_hw *hw);
-s32 e1000_led_on(struct e1000_hw *hw);
-s32 e1000_led_off(struct e1000_hw *hw);
-s32 e1000_id_led_init(struct e1000_hw *hw);
-void e1000_reset_adaptive(struct e1000_hw *hw);
-void e1000_update_adaptive(struct e1000_hw *hw);
-s32 e1000_get_cable_length(struct e1000_hw *hw);
-s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data);
-s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset,
-			      u8 data);
-s32 e1000_get_phy_info(struct e1000_hw *hw);
-void e1000_release_phy(struct e1000_hw *hw);
-s32 e1000_acquire_phy(struct e1000_hw *hw);
-s32 e1000_phy_hw_reset(struct e1000_hw *hw);
-s32 e1000_phy_commit(struct e1000_hw *hw);
-void e1000_power_up_phy(struct e1000_hw *hw);
-void e1000_power_down_phy(struct e1000_hw *hw);
-s32 e1000_read_mac_addr(struct e1000_hw *hw);
-s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size);
-s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size);
-void e1000_reload_nvm(struct e1000_hw *hw);
-s32 e1000_update_nvm_checksum(struct e1000_hw *hw);
-s32 e1000_validate_nvm_checksum(struct e1000_hw *hw);
-s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
-s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
-bool e1000_check_mng_mode(struct e1000_hw *hw);
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
-s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
-			    u16 offset, u8 *sum);
-s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
-			       struct e1000_host_mng_command_header *hdr);
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
-s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw);
-s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw);
-
-
-
-/*
- * TBI_ACCEPT macro definition:
- *
- * This macro requires:
- *      adapter = a pointer to struct e1000_hw
- *      status = the 8 bit status field of the Rx descriptor with EOP set
- *      error = the 8 bit error field of the Rx descriptor with EOP set
- *      length = the sum of all the length fields of the Rx descriptors that
- *               make up the current frame
- *      last_byte = the last byte of the frame DMAed by the hardware
- *      max_frame_length = the maximum frame length we want to accept.
- *      min_frame_length = the minimum frame length we want to accept.
- *
- * This macro is a conditional that should be used in the interrupt
- * handler's Rx processing routine when RxErrors have been detected.
- *
- * Typical use:
- *  ...
- *  if (TBI_ACCEPT) {
- *      accept_frame = true;
- *      e1000_tbi_adjust_stats(adapter, MacAddress);
- *      frame_length--;
- *  } else {
- *      accept_frame = false;
- *  }
- *  ...
- */
-
-/* The carrier extension symbol, as received by the NIC. */
-#define CARRIER_EXTENSION   0x0F
-
-#define TBI_ACCEPT(a, status, errors, length, last_byte, \
-		   min_frame_size, max_frame_size) \
-	(e1000_tbi_sbp_enabled_82543(a) && \
-	 (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
-	 ((last_byte) == CARRIER_EXTENSION) && \
-	 (((status) & E1000_RXD_STAT_VP) ? \
-	  (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \
-	  ((length) <= (max_frame_size + 1))) : \
-	  (((length) > min_frame_size) && \
-	  ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1)))))
-
-#ifndef E1000_MAX
-#define E1000_MAX(a, b) ((a) > (b) ? (a) : (b))
-#endif
-#ifndef E1000_DIVIDE_ROUND_UP
-#define E1000_DIVIDE_ROUND_UP(a, b)	(((a) + (b) - 1) / (b)) /* ceil(a/b) */
-#endif
-#endif /* _E1000_API_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_defines.h b/kernel/linux/kni/ethtool/igb/e1000_defines.h
deleted file mode 100644
index b39aaf80a..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_defines.h
+++ /dev/null
@@ -1,1365 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_DEFINES_H_
-#define _E1000_DEFINES_H_
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE  8
-#define REQ_RX_DESCRIPTOR_MULTIPLE  8
-
-/* Definitions for power management and wakeup registers */
-/* Wake Up Control */
-#define E1000_WUC_APME		0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN	0x00000002 /* PME Enable */
-#define E1000_WUC_PME_STATUS	0x00000004 /* PME Status */
-#define E1000_WUC_APMPME	0x00000008 /* Assert PME on APM Wakeup */
-#define E1000_WUC_PHY_WAKE	0x00000100 /* if PHY supports wakeup */
-
-/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC	0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG	0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX	0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC	0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC	0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP	0x00000020 /* ARP Request Packet Wakeup Enable */
-#define E1000_WUFC_IPV4	0x00000040 /* Directed IPv4 Packet Wakeup Enable */
-#define E1000_WUFC_FLX0		0x00010000 /* Flexible Filter 0 Enable */
-
-/* Wake Up Status */
-#define E1000_WUS_LNKC		E1000_WUFC_LNKC
-#define E1000_WUS_MAG		E1000_WUFC_MAG
-#define E1000_WUS_EX		E1000_WUFC_EX
-#define E1000_WUS_MC		E1000_WUFC_MC
-#define E1000_WUS_BC		E1000_WUFC_BC
-
-/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP4_DATA	0x00000010 /* SW Definable Pin 4 data */
-#define E1000_CTRL_EXT_SDP6_DATA	0x00000040 /* SW Definable Pin 6 data */
-#define E1000_CTRL_EXT_SDP3_DATA	0x00000080 /* SW Definable Pin 3 data */
-#define E1000_CTRL_EXT_SDP6_DIR	0x00000400 /* Direction of SDP6 0=in 1=out */
-#define E1000_CTRL_EXT_SDP3_DIR	0x00000800 /* Direction of SDP3 0=in 1=out */
-#define E1000_CTRL_EXT_EE_RST	0x00002000 /* Reinitialize from EEPROM */
-/* Physical Func Reset Done Indication */
-#define E1000_CTRL_EXT_PFRSTD	0x00004000
-#define E1000_CTRL_EXT_SPD_BYPS	0x00008000 /* Speed Select Bypass */
-#define E1000_CTRL_EXT_RO_DIS	0x00020000 /* Relaxed Ordering disable */
-#define E1000_CTRL_EXT_DMA_DYN_CLK_EN	0x00080000 /* DMA Dynamic Clk Gating */
-#define E1000_CTRL_EXT_LINK_MODE_MASK	0x00C00000
-/* Offset of the link mode field in Ctrl Ext register */
-#define E1000_CTRL_EXT_LINK_MODE_OFFSET	22
-#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX	0x00400000
-#define E1000_CTRL_EXT_LINK_MODE_GMII	0x00000000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES	0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII	0x00800000
-#define E1000_CTRL_EXT_EIAME		0x01000000
-#define E1000_CTRL_EXT_IRCA		0x00000001
-#define E1000_CTRL_EXT_DRV_LOAD		0x10000000 /* Drv loaded bit for FW */
-#define E1000_CTRL_EXT_IAME		0x08000000 /* Int ACK Auto-mask */
-#define E1000_CTRL_EXT_PBA_CLR		0x80000000 /* PBA Clear */
-#define E1000_I2CCMD_REG_ADDR_SHIFT	16
-#define E1000_I2CCMD_PHY_ADDR_SHIFT	24
-#define E1000_I2CCMD_OPCODE_READ	0x08000000
-#define E1000_I2CCMD_OPCODE_WRITE	0x00000000
-#define E1000_I2CCMD_READY		0x20000000
-#define E1000_I2CCMD_ERROR		0x80000000
-#define E1000_I2CCMD_SFP_DATA_ADDR(a)	(0x0000 + (a))
-#define E1000_I2CCMD_SFP_DIAG_ADDR(a)	(0x0100 + (a))
-#define E1000_MAX_SGMII_PHY_REG_ADDR	255
-#define E1000_I2CCMD_PHY_TIMEOUT	200
-#define E1000_IVAR_VALID	0x80
-#define E1000_GPIE_NSICR	0x00000001
-#define E1000_GPIE_MSIX_MODE	0x00000010
-#define E1000_GPIE_EIAME	0x40000000
-#define E1000_GPIE_PBA		0x80000000
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD	0x01    /* Descriptor Done */
-#define E1000_RXD_STAT_EOP	0x02    /* End of Packet */
-#define E1000_RXD_STAT_IXSM	0x04    /* Ignore checksum */
-#define E1000_RXD_STAT_VP	0x08    /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS	0x10    /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS	0x20    /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS	0x40    /* IP xsum calculated */
-#define E1000_RXD_STAT_PIF	0x80    /* passed in-exact filter */
-#define E1000_RXD_STAT_IPIDV	0x200   /* IP identification valid */
-#define E1000_RXD_STAT_UDPV	0x400   /* Valid UDP checksum */
-#define E1000_RXD_STAT_DYNINT	0x800   /* Pkt caused INT via DYNINT */
-#define E1000_RXD_ERR_CE	0x01    /* CRC Error */
-#define E1000_RXD_ERR_SE	0x02    /* Symbol Error */
-#define E1000_RXD_ERR_SEQ	0x04    /* Sequence Error */
-#define E1000_RXD_ERR_CXE	0x10    /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE	0x20    /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_IPE	0x40    /* IP Checksum Error */
-#define E1000_RXD_ERR_RXE	0x80    /* Rx Data Error */
-#define E1000_RXD_SPC_VLAN_MASK	0x0FFF  /* VLAN ID is in lower 12 bits */
-
-#define E1000_RXDEXT_STATERR_TST	0x00000100 /* Time Stamp taken */
-#define E1000_RXDEXT_STATERR_LB		0x00040000
-#define E1000_RXDEXT_STATERR_CE		0x01000000
-#define E1000_RXDEXT_STATERR_SE		0x02000000
-#define E1000_RXDEXT_STATERR_SEQ	0x04000000
-#define E1000_RXDEXT_STATERR_CXE	0x10000000
-#define E1000_RXDEXT_STATERR_TCPE	0x20000000
-#define E1000_RXDEXT_STATERR_IPE	0x40000000
-#define E1000_RXDEXT_STATERR_RXE	0x80000000
-
-/* mask to determine if packets should be dropped due to frame errors */
-#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
-	E1000_RXD_ERR_CE  |		\
-	E1000_RXD_ERR_SE  |		\
-	E1000_RXD_ERR_SEQ |		\
-	E1000_RXD_ERR_CXE |		\
-	E1000_RXD_ERR_RXE)
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
-	E1000_RXDEXT_STATERR_CE  |	\
-	E1000_RXDEXT_STATERR_SE  |	\
-	E1000_RXDEXT_STATERR_SEQ |	\
-	E1000_RXDEXT_STATERR_CXE |	\
-	E1000_RXDEXT_STATERR_RXE)
-
-#define E1000_MRQC_RSS_FIELD_MASK		0xFFFF0000
-#define E1000_MRQC_RSS_FIELD_IPV4_TCP		0x00010000
-#define E1000_MRQC_RSS_FIELD_IPV4		0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX	0x00040000
-#define E1000_MRQC_RSS_FIELD_IPV6		0x00100000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP		0x00200000
-
-#define E1000_RXDPS_HDRSTAT_HDRSP		0x00008000
-
-/* Management Control */
-#define E1000_MANC_SMBUS_EN	0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN	0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_ARP_EN	0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_RCV_TCO_EN	0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE	0x00040000 /* Block phy resets */
-/* Enable MAC address filtering */
-#define E1000_MANC_EN_MAC_ADDR_FILTER	0x00100000
-/* Enable MNG packets to host memory */
-#define E1000_MANC_EN_MNG2HOST		0x00200000
-
-#define E1000_MANC2H_PORT_623		0x00000020 /* Port 0x26f */
-#define E1000_MANC2H_PORT_664		0x00000040 /* Port 0x298 */
-#define E1000_MDEF_PORT_623		0x00000800 /* Port 0x26f */
-#define E1000_MDEF_PORT_664		0x00000400 /* Port 0x298 */
-
-/* Receive Control */
-#define E1000_RCTL_RST		0x00000001 /* Software reset */
-#define E1000_RCTL_EN		0x00000002 /* enable */
-#define E1000_RCTL_SBP		0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE		0x00000008 /* unicast promisc enable */
-#define E1000_RCTL_MPE		0x00000010 /* multicast promisc enable */
-#define E1000_RCTL_LPE		0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_NO	0x00000000 /* no loopback mode */
-#define E1000_RCTL_LBM_MAC	0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_TCVR	0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_DTYP_PS	0x00000400 /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF	0x00000000 /* Rx desc min thresh size */
-#define E1000_RCTL_MO_SHIFT	12 /* multicast offset shift */
-#define E1000_RCTL_MO_3		0x00003000 /* multicast offset 15:4 */
-#define E1000_RCTL_BAM		0x00008000 /* broadcast enable */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048	0x00000000 /* Rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024	0x00010000 /* Rx buffer size 1024 */
-#define E1000_RCTL_SZ_512	0x00020000 /* Rx buffer size 512 */
-#define E1000_RCTL_SZ_256	0x00030000 /* Rx buffer size 256 */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384	0x00010000 /* Rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192	0x00020000 /* Rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096	0x00030000 /* Rx buffer size 4096 */
-#define E1000_RCTL_VFE		0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN	0x00080000 /* canonical form enable */
-#define E1000_RCTL_CFI		0x00100000 /* canonical form indicator */
-#define E1000_RCTL_DPF		0x00400000 /* discard pause frames */
-#define E1000_RCTL_PMCF		0x00800000 /* pass MAC control frames */
-#define E1000_RCTL_BSEX		0x02000000 /* Buffer size extension */
-#define E1000_RCTL_SECRC	0x04000000 /* Strip Ethernet CRC */
-
-/* Use byte values for the following shift parameters
- * Usage:
- *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
- *		  E1000_PSRCTL_BSIZE0_MASK) |
- *		((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
- *		  E1000_PSRCTL_BSIZE1_MASK) |
- *		((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
- *		  E1000_PSRCTL_BSIZE2_MASK) |
- *		((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
- *		  E1000_PSRCTL_BSIZE3_MASK))
- * where value0 = [128..16256],  default=256
- *       value1 = [1024..64512], default=4096
- *       value2 = [0..64512],    default=4096
- *       value3 = [0..64512],    default=0
- */
-
-#define E1000_PSRCTL_BSIZE0_MASK	0x0000007F
-#define E1000_PSRCTL_BSIZE1_MASK	0x00003F00
-#define E1000_PSRCTL_BSIZE2_MASK	0x003F0000
-#define E1000_PSRCTL_BSIZE3_MASK	0x3F000000
-
-#define E1000_PSRCTL_BSIZE0_SHIFT	7    /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT	2    /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT	6    /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT	14   /* Shift _left_ 14 */
-
-/* SWFW_SYNC Definitions */
-#define E1000_SWFW_EEP_SM	0x01
-#define E1000_SWFW_PHY0_SM	0x02
-#define E1000_SWFW_PHY1_SM	0x04
-#define E1000_SWFW_CSR_SM	0x08
-#define E1000_SWFW_PHY2_SM	0x20
-#define E1000_SWFW_PHY3_SM	0x40
-#define E1000_SWFW_SW_MNG_SM	0x400
-
-/* Device Control */
-#define E1000_CTRL_FD		0x00000001  /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_PRIOR	0x00000004  /* Priority on PCI. 0=rx,1=fair */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */
-#define E1000_CTRL_LRST		0x00000008  /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_ASDE		0x00000020  /* Auto-speed detect enable */
-#define E1000_CTRL_SLU		0x00000040  /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS		0x00000080  /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL	0x00000300  /* Speed Select Mask */
-#define E1000_CTRL_SPD_10	0x00000000  /* Force 10Mb */
-#define E1000_CTRL_SPD_100	0x00000100  /* Force 100Mb */
-#define E1000_CTRL_SPD_1000	0x00000200  /* Force 1Gb */
-#define E1000_CTRL_FRCSPD	0x00000800  /* Force Speed */
-#define E1000_CTRL_FRCDPX	0x00001000  /* Force Duplex */
-#define E1000_CTRL_SWDPIN0	0x00040000 /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1	0x00080000 /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIN2	0x00100000 /* SWDPIN 2 value */
-#define E1000_CTRL_ADVD3WUC	0x00100000 /* D3 WUC */
-#define E1000_CTRL_SWDPIN3	0x00200000 /* SWDPIN 3 value */
-#define E1000_CTRL_SWDPIO0	0x00400000 /* SWDPIN 0 Input or output */
-#define E1000_CTRL_RST		0x04000000 /* Global reset */
-#define E1000_CTRL_RFCE		0x08000000 /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE		0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_VME		0x40000000 /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST	0x80000000 /* PHY Reset */
-#define E1000_CTRL_I2C_ENA	0x02000000 /* I2C enable */
-
-
-#define E1000_CONNSW_ENRGSRC		0x4
-#define E1000_CONNSW_PHYSD		0x400
-#define E1000_CONNSW_PHY_PDN		0x800
-#define E1000_CONNSW_SERDESD		0x200
-#define E1000_CONNSW_AUTOSENSE_CONF	0x2
-#define E1000_CONNSW_AUTOSENSE_EN	0x1
-#define E1000_PCS_CFG_PCS_EN		8
-#define E1000_PCS_LCTL_FLV_LINK_UP	1
-#define E1000_PCS_LCTL_FSV_10		0
-#define E1000_PCS_LCTL_FSV_100		2
-#define E1000_PCS_LCTL_FSV_1000		4
-#define E1000_PCS_LCTL_FDV_FULL		8
-#define E1000_PCS_LCTL_FSD		0x10
-#define E1000_PCS_LCTL_FORCE_LINK	0x20
-#define E1000_PCS_LCTL_FORCE_FCTRL	0x80
-#define E1000_PCS_LCTL_AN_ENABLE	0x10000
-#define E1000_PCS_LCTL_AN_RESTART	0x20000
-#define E1000_PCS_LCTL_AN_TIMEOUT	0x40000
-#define E1000_ENABLE_SERDES_LOOPBACK	0x0410
-
-#define E1000_PCS_LSTS_LINK_OK		1
-#define E1000_PCS_LSTS_SPEED_100	2
-#define E1000_PCS_LSTS_SPEED_1000	4
-#define E1000_PCS_LSTS_DUPLEX_FULL	8
-#define E1000_PCS_LSTS_SYNK_OK		0x10
-#define E1000_PCS_LSTS_AN_COMPLETE	0x10000
-
-/* Device Status */
-#define E1000_STATUS_FD			0x00000001 /* Duplex 0=half 1=full */
-#define E1000_STATUS_LU			0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK		0x0000000C /* PCI Function Mask */
-#define E1000_STATUS_FUNC_SHIFT		2
-#define E1000_STATUS_FUNC_1		0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF		0x00000010 /* transmission paused */
-#define E1000_STATUS_SPEED_MASK	0x000000C0
-#define E1000_STATUS_SPEED_10		0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100		0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000		0x00000080 /* Speed 1000Mb/s */
-#define E1000_STATUS_LAN_INIT_DONE	0x00000200 /* Lan Init Compltn by NVM */
-#define E1000_STATUS_PHYRA		0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE	0x00080000 /* Master request status */
-#define E1000_STATUS_2P5_SKU		0x00001000 /* Val of 2.5GBE SKU strap */
-#define E1000_STATUS_2P5_SKU_OVER	0x00002000 /* Val of 2.5GBE SKU Over */
-
-#define SPEED_10	10
-#define SPEED_100	100
-#define SPEED_1000	1000
-#define SPEED_2500	2500
-#define HALF_DUPLEX	1
-#define FULL_DUPLEX	2
-
-
-#define ADVERTISE_10_HALF		0x0001
-#define ADVERTISE_10_FULL		0x0002
-#define ADVERTISE_100_HALF		0x0004
-#define ADVERTISE_100_FULL		0x0008
-#define ADVERTISE_1000_HALF		0x0010 /* Not used, just FYI */
-#define ADVERTISE_1000_FULL		0x0020
-
-/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX	( \
-	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
-	ADVERTISE_100_FULL | ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG	( \
-	ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \
-	ADVERTISE_100_FULL)
-#define E1000_ALL_100_SPEED	(ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED	(ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX	(ADVERTISE_10_HALF | ADVERTISE_100_HALF)
-
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT		E1000_ALL_SPEED_DUPLEX
-
-/* LED Control */
-#define E1000_LEDCTL_LED0_MODE_MASK	0x0000000F
-#define E1000_LEDCTL_LED0_MODE_SHIFT	0
-#define E1000_LEDCTL_LED0_IVRT		0x00000040
-#define E1000_LEDCTL_LED0_BLINK		0x00000080
-
-#define E1000_LEDCTL_MODE_LED_ON	0xE
-#define E1000_LEDCTL_MODE_LED_OFF	0xF
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_DTYP_D	0x00100000 /* Data Descriptor */
-#define E1000_TXD_DTYP_C	0x00000000 /* Context Descriptor */
-#define E1000_TXD_POPTS_IXSM	0x01       /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM	0x02       /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP	0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS	0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC	0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS	0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS	0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT	0x20000000 /* Desc extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE	0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE	0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD	0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC	0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC	0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU	0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP	0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP	0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE	0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC	0x00000004 /* Tx Underrun */
-#define E1000_TXD_EXTCMD_TSTAMP	0x00000010 /* IEEE1588 Timestamp packet */
-
-/* Transmit Control */
-#define E1000_TCTL_EN		0x00000002 /* enable Tx */
-#define E1000_TCTL_PSP		0x00000008 /* pad short packets */
-#define E1000_TCTL_CT		0x00000ff0 /* collision threshold */
-#define E1000_TCTL_COLD		0x003ff000 /* collision distance */
-#define E1000_TCTL_RTLC		0x01000000 /* Re-transmit on late collision */
-#define E1000_TCTL_MULR		0x10000000 /* Multiple request support */
-
-/* Transmit Arbitration Count */
-#define E1000_TARC0_ENABLE	0x00000400 /* Enable Tx Queue 0 */
-
-/* SerDes Control */
-#define E1000_SCTL_DISABLE_SERDES_LOOPBACK	0x0400
-#define E1000_SCTL_ENABLE_SERDES_LOOPBACK	0x0410
-
-/* Receive Checksum Control */
-#define E1000_RXCSUM_IPOFL	0x00000100 /* IPv4 checksum offload */
-#define E1000_RXCSUM_TUOFL	0x00000200 /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_CRCOFL	0x00000800 /* CRC32 offload enable */
-#define E1000_RXCSUM_IPPCSE	0x00001000 /* IP payload checksum enable */
-#define E1000_RXCSUM_PCSD	0x00002000 /* packet checksum disabled */
-
-/* Header split receive */
-#define E1000_RFCTL_NFSW_DIS		0x00000040
-#define E1000_RFCTL_NFSR_DIS		0x00000080
-#define E1000_RFCTL_ACK_DIS		0x00001000
-#define E1000_RFCTL_EXTEN		0x00008000
-#define E1000_RFCTL_IPV6_EX_DIS		0x00010000
-#define E1000_RFCTL_NEW_IPV6_EXT_DIS	0x00020000
-#define E1000_RFCTL_LEF			0x00040000
-
-/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD	15
-#define E1000_CT_SHIFT			4
-#define E1000_COLLISION_DISTANCE	63
-#define E1000_COLD_SHIFT		12
-
-/* Default values for the transmit IPG register */
-#define DEFAULT_82543_TIPG_IPGT_FIBER	9
-#define DEFAULT_82543_TIPG_IPGT_COPPER	8
-
-#define E1000_TIPG_IPGT_MASK		0x000003FF
-
-#define DEFAULT_82543_TIPG_IPGR1	8
-#define E1000_TIPG_IPGR1_SHIFT		10
-
-#define DEFAULT_82543_TIPG_IPGR2	6
-#define DEFAULT_80003ES2LAN_TIPG_IPGR2	7
-#define E1000_TIPG_IPGR2_SHIFT		20
-
-/* Ethertype field values */
-#define ETHERNET_IEEE_VLAN_TYPE		0x8100  /* 802.3ac packet */
-
-#define ETHERNET_FCS_SIZE		4
-#define MAX_JUMBO_FRAME_SIZE		0x3F00
-
-/* Extended Configuration Control and Size */
-#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP	0x00000020
-#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE	0x00000001
-#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE	0x00000008
-#define E1000_EXTCNF_CTRL_SWFLAG		0x00000020
-#define E1000_EXTCNF_CTRL_GATE_PHY_CFG		0x00000080
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK	0x00FF0000
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT	16
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK	0x0FFF0000
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT	16
-
-#define E1000_PHY_CTRL_D0A_LPLU			0x00000002
-#define E1000_PHY_CTRL_NOND0A_LPLU		0x00000004
-#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE	0x00000008
-#define E1000_PHY_CTRL_GBE_DISABLE		0x00000040
-
-#define E1000_KABGTXD_BGSQLBIAS			0x00050000
-
-/* PBA constants */
-#define E1000_PBA_8K		0x0008    /* 8KB */
-#define E1000_PBA_10K		0x000A    /* 10KB */
-#define E1000_PBA_12K		0x000C    /* 12KB */
-#define E1000_PBA_14K		0x000E    /* 14KB */
-#define E1000_PBA_16K		0x0010    /* 16KB */
-#define E1000_PBA_18K		0x0012
-#define E1000_PBA_20K		0x0014
-#define E1000_PBA_22K		0x0016
-#define E1000_PBA_24K		0x0018
-#define E1000_PBA_26K		0x001A
-#define E1000_PBA_30K		0x001E
-#define E1000_PBA_32K		0x0020
-#define E1000_PBA_34K		0x0022
-#define E1000_PBA_35K		0x0023
-#define E1000_PBA_38K		0x0026
-#define E1000_PBA_40K		0x0028
-#define E1000_PBA_48K		0x0030    /* 48KB */
-#define E1000_PBA_64K		0x0040    /* 64KB */
-
-#define E1000_PBA_RXA_MASK	0xFFFF
-
-#define E1000_PBS_16K		E1000_PBA_16K
-
-#define IFS_MAX			80
-#define IFS_MIN			40
-#define IFS_RATIO		4
-#define IFS_STEP		10
-#define MIN_NUM_XMITS		1000
-
-/* SW Semaphore Register */
-#define E1000_SWSM_SMBI		0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI	0x00000002 /* FW Semaphore bit */
-#define E1000_SWSM_DRV_LOAD	0x00000008 /* Driver Loaded Bit */
-
-#define E1000_SWSM2_LOCK	0x00000002 /* Secondary driver semaphore bit */
-
-/* Interrupt Cause Read */
-#define E1000_ICR_TXDW		0x00000001 /* Transmit desc written back */
-#define E1000_ICR_TXQE		0x00000002 /* Transmit Queue empty */
-#define E1000_ICR_LSC		0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ		0x00000008 /* Rx sequence error */
-#define E1000_ICR_RXDMT0	0x00000010 /* Rx desc min. threshold (0) */
-#define E1000_ICR_RXO		0x00000040 /* Rx overrun */
-#define E1000_ICR_RXT0		0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_VMMB		0x00000100 /* VM MB event */
-#define E1000_ICR_RXCFG		0x00000400 /* Rx /c/ ordered set */
-#define E1000_ICR_GPI_EN0	0x00000800 /* GP Int 0 */
-#define E1000_ICR_GPI_EN1	0x00001000 /* GP Int 1 */
-#define E1000_ICR_GPI_EN2	0x00002000 /* GP Int 2 */
-#define E1000_ICR_GPI_EN3	0x00004000 /* GP Int 3 */
-#define E1000_ICR_TXD_LOW	0x00008000
-#define E1000_ICR_MNG		0x00040000 /* Manageability event */
-#define E1000_ICR_TS		0x00080000 /* Time Sync Interrupt */
-#define E1000_ICR_DRSTA		0x40000000 /* Device Reset Asserted */
-/* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_INT_ASSERTED	0x80000000
-#define E1000_ICR_DOUTSYNC	0x10000000 /* NIC DMA out of sync */
-#define E1000_ICR_FER		0x00400000 /* Fatal Error */
-
-#define E1000_ICR_THS		0x00800000 /* ICR.THS: Thermal Sensor Event*/
-#define E1000_ICR_MDDET		0x10000000 /* Malicious Driver Detect */
-
-
-/* Extended Interrupt Cause Read */
-#define E1000_EICR_RX_QUEUE0	0x00000001 /* Rx Queue 0 Interrupt */
-#define E1000_EICR_RX_QUEUE1	0x00000002 /* Rx Queue 1 Interrupt */
-#define E1000_EICR_RX_QUEUE2	0x00000004 /* Rx Queue 2 Interrupt */
-#define E1000_EICR_RX_QUEUE3	0x00000008 /* Rx Queue 3 Interrupt */
-#define E1000_EICR_TX_QUEUE0	0x00000100 /* Tx Queue 0 Interrupt */
-#define E1000_EICR_TX_QUEUE1	0x00000200 /* Tx Queue 1 Interrupt */
-#define E1000_EICR_TX_QUEUE2	0x00000400 /* Tx Queue 2 Interrupt */
-#define E1000_EICR_TX_QUEUE3	0x00000800 /* Tx Queue 3 Interrupt */
-#define E1000_EICR_TCP_TIMER	0x40000000 /* TCP Timer */
-#define E1000_EICR_OTHER	0x80000000 /* Interrupt Cause Active */
-/* TCP Timer */
-#define E1000_TCPTIMER_KS	0x00000100 /* KickStart */
-#define E1000_TCPTIMER_COUNT_ENABLE	0x00000200 /* Count Enable */
-#define E1000_TCPTIMER_COUNT_FINISH	0x00000400 /* Count finish */
-#define E1000_TCPTIMER_LOOP	0x00000800 /* Loop */
-
-/* This defines the bits that are set in the Interrupt Mask
- * Set/Read Register.  Each bit is documented below:
- *   o RXT0   = Receiver Timer Interrupt (ring 0)
- *   o TXDW   = Transmit Descriptor Written Back
- *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- *   o RXSEQ  = Receive Sequence Error
- *   o LSC    = Link Status Change
- */
-#define IMS_ENABLE_MASK ( \
-	E1000_IMS_RXT0   |    \
-	E1000_IMS_TXDW   |    \
-	E1000_IMS_RXDMT0 |    \
-	E1000_IMS_RXSEQ  |    \
-	E1000_IMS_LSC)
-
-/* Interrupt Mask Set */
-#define E1000_IMS_TXDW		E1000_ICR_TXDW    /* Tx desc written back */
-#define E1000_IMS_TXQE		E1000_ICR_TXQE    /* Transmit Queue empty */
-#define E1000_IMS_LSC		E1000_ICR_LSC     /* Link Status Change */
-#define E1000_IMS_VMMB		E1000_ICR_VMMB    /* Mail box activity */
-#define E1000_IMS_RXSEQ		E1000_ICR_RXSEQ   /* Rx sequence error */
-#define E1000_IMS_RXDMT0	E1000_ICR_RXDMT0  /* Rx desc min. threshold */
-#define E1000_IMS_RXO		E1000_ICR_RXO     /* Rx overrun */
-#define E1000_IMS_RXT0		E1000_ICR_RXT0    /* Rx timer intr */
-#define E1000_IMS_TXD_LOW	E1000_ICR_TXD_LOW
-#define E1000_IMS_TS		E1000_ICR_TS      /* Time Sync Interrupt */
-#define E1000_IMS_DRSTA		E1000_ICR_DRSTA   /* Device Reset Asserted */
-#define E1000_IMS_DOUTSYNC	E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
-#define E1000_IMS_FER		E1000_ICR_FER /* Fatal Error */
-
-#define E1000_IMS_THS		E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/
-#define E1000_IMS_MDDET		E1000_ICR_MDDET /* Malicious Driver Detect */
-/* Extended Interrupt Mask Set */
-#define E1000_EIMS_RX_QUEUE0	E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
-#define E1000_EIMS_RX_QUEUE1	E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
-#define E1000_EIMS_RX_QUEUE2	E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
-#define E1000_EIMS_RX_QUEUE3	E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
-#define E1000_EIMS_TX_QUEUE0	E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
-#define E1000_EIMS_TX_QUEUE1	E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
-#define E1000_EIMS_TX_QUEUE2	E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
-#define E1000_EIMS_TX_QUEUE3	E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
-#define E1000_EIMS_TCP_TIMER	E1000_EICR_TCP_TIMER /* TCP Timer */
-#define E1000_EIMS_OTHER	E1000_EICR_OTHER   /* Interrupt Cause Active */
-
-/* Interrupt Cause Set */
-#define E1000_ICS_LSC		E1000_ICR_LSC       /* Link Status Change */
-#define E1000_ICS_RXSEQ		E1000_ICR_RXSEQ     /* Rx sequence error */
-#define E1000_ICS_RXDMT0	E1000_ICR_RXDMT0    /* Rx desc min. threshold */
-
-/* Extended Interrupt Cause Set */
-#define E1000_EICS_RX_QUEUE0	E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */
-#define E1000_EICS_RX_QUEUE1	E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */
-#define E1000_EICS_RX_QUEUE2	E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */
-#define E1000_EICS_RX_QUEUE3	E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */
-#define E1000_EICS_TX_QUEUE0	E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */
-#define E1000_EICS_TX_QUEUE1	E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */
-#define E1000_EICS_TX_QUEUE2	E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */
-#define E1000_EICS_TX_QUEUE3	E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */
-#define E1000_EICS_TCP_TIMER	E1000_EICR_TCP_TIMER /* TCP Timer */
-#define E1000_EICS_OTHER	E1000_EICR_OTHER   /* Interrupt Cause Active */
-
-#define E1000_EITR_ITR_INT_MASK	0x0000FFFF
-/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
-#define E1000_EITR_CNT_IGNR	0x80000000 /* Don't reset counters on write */
-#define E1000_EITR_INTERVAL 0x00007FFC
-
-/* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH	0x0000003F /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH	0x00003F00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH	0x003F0000 /* TXDCTL Writeback Threshold */
-#define E1000_TXDCTL_GRAN	0x01000000 /* TXDCTL Granularity */
-#define E1000_TXDCTL_FULL_TX_DESC_WB	0x01010000 /* GRAN=1, WTHRESH=1 */
-#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
-/* Enable the counting of descriptors still to be processed. */
-#define E1000_TXDCTL_COUNT_DESC	0x00400000
-
-/* Flow Control Constants */
-#define FLOW_CONTROL_ADDRESS_LOW	0x00C28001
-#define FLOW_CONTROL_ADDRESS_HIGH	0x00000100
-#define FLOW_CONTROL_TYPE		0x8808
-
-/* 802.1q VLAN Packet Size */
-#define VLAN_TAG_SIZE			4    /* 802.3ac tag (not DMA'd) */
-#define E1000_VLAN_FILTER_TBL_SIZE	128  /* VLAN Filter Table (4096 bits) */
-
-/* Receive Address
- * Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor.
- * Technically, we have 16 spots.  However, we reserve one of these spots
- * (RAR[15]) for our directed address used by controllers with
- * manageability enabled, allowing us room for 15 multicast addresses.
- */
-#define E1000_RAR_ENTRIES	15
-#define E1000_RAH_AV		0x80000000 /* Receive descriptor valid */
-#define E1000_RAL_MAC_ADDR_LEN	4
-#define E1000_RAH_MAC_ADDR_LEN	2
-#define E1000_RAH_QUEUE_MASK_82575	0x000C0000
-#define E1000_RAH_POOL_1	0x00040000
-
-/* Error Codes */
-#define E1000_SUCCESS			0
-#define E1000_ERR_NVM			1
-#define E1000_ERR_PHY			2
-#define E1000_ERR_CONFIG		3
-#define E1000_ERR_PARAM			4
-#define E1000_ERR_MAC_INIT		5
-#define E1000_ERR_PHY_TYPE		6
-#define E1000_ERR_RESET			9
-#define E1000_ERR_MASTER_REQUESTS_PENDING	10
-#define E1000_ERR_HOST_INTERFACE_COMMAND	11
-#define E1000_BLK_PHY_RESET		12
-#define E1000_ERR_SWFW_SYNC		13
-#define E1000_NOT_IMPLEMENTED		14
-#define E1000_ERR_MBX			15
-#define E1000_ERR_INVALID_ARGUMENT	16
-#define E1000_ERR_NO_SPACE		17
-#define E1000_ERR_NVM_PBA_SECTION	18
-#define E1000_ERR_I2C			19
-#define E1000_ERR_INVM_VALUE_NOT_FOUND	20
-
-/* Loop limit on how long we wait for auto-negotiation to complete */
-#define FIBER_LINK_UP_LIMIT		50
-#define COPPER_LINK_UP_LIMIT		10
-#define PHY_AUTO_NEG_LIMIT		45
-#define PHY_FORCE_LIMIT			20
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT		800
-/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT			100
-/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
-#define MDIO_OWNERSHIP_TIMEOUT		10
-/* Number of milliseconds for NVM auto read done after MAC reset. */
-#define AUTO_READ_DONE_TIMEOUT		10
-
-/* Flow Control */
-#define E1000_FCRTH_RTH		0x0000FFF8 /* Mask Bits[15:3] for RTH */
-#define E1000_FCRTL_RTL		0x0000FFF8 /* Mask Bits[15:3] for RTL */
-#define E1000_FCRTL_XONE	0x80000000 /* Enable XON frame transmission */
-
-/* Transmit Configuration Word */
-#define E1000_TXCW_FD		0x00000020 /* TXCW full duplex */
-#define E1000_TXCW_PAUSE	0x00000080 /* TXCW sym pause request */
-#define E1000_TXCW_ASM_DIR	0x00000100 /* TXCW astm pause direction */
-#define E1000_TXCW_PAUSE_MASK	0x00000180 /* TXCW pause request mask */
-#define E1000_TXCW_ANE		0x80000000 /* Auto-neg enable */
-
-/* Receive Configuration Word */
-#define E1000_RXCW_CW		0x0000ffff /* RxConfigWord mask */
-#define E1000_RXCW_IV		0x08000000 /* Receive config invalid */
-#define E1000_RXCW_C		0x20000000 /* Receive config */
-#define E1000_RXCW_SYNCH	0x40000000 /* Receive config synch */
-
-#define E1000_TSYNCTXCTL_VALID		0x00000001 /* Tx timestamp valid */
-#define E1000_TSYNCTXCTL_ENABLED	0x00000010 /* enable Tx timestamping */
-
-#define E1000_TSYNCRXCTL_VALID		0x00000001 /* Rx timestamp valid */
-#define E1000_TSYNCRXCTL_TYPE_MASK	0x0000000E /* Rx type mask */
-#define E1000_TSYNCRXCTL_TYPE_L2_V2	0x00
-#define E1000_TSYNCRXCTL_TYPE_L4_V1	0x02
-#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2	0x04
-#define E1000_TSYNCRXCTL_TYPE_ALL	0x08
-#define E1000_TSYNCRXCTL_TYPE_EVENT_V2	0x0A
-#define E1000_TSYNCRXCTL_ENABLED	0x00000010 /* enable Rx timestamping */
-#define E1000_TSYNCRXCTL_SYSCFI		0x00000020 /* Sys clock frequency */
-
-#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK		0x000000FF
-#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE		0x00
-#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE	0x01
-#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE	0x02
-#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE	0x03
-#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE	0x04
-
-#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK		0x00000F00
-#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE		0x0000
-#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE	0x0100
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE	0x0200
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE	0x0300
-#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE	0x0800
-#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE	0x0900
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
-#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE	0x0B00
-#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE	0x0C00
-#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE	0x0D00
-
-#define E1000_TIMINCA_16NS_SHIFT	24
-#define E1000_TIMINCA_INCPERIOD_SHIFT	24
-#define E1000_TIMINCA_INCVALUE_MASK	0x00FFFFFF
-
-#define E1000_TSICR_TXTS		0x00000002
-#define E1000_TSIM_TXTS			0x00000002
-/* TUPLE Filtering Configuration */
-#define E1000_TTQF_DISABLE_MASK		0xF0008000 /* TTQF Disable Mask */
-#define E1000_TTQF_QUEUE_ENABLE		0x100   /* TTQF Queue Enable Bit */
-#define E1000_TTQF_PROTOCOL_MASK	0xFF    /* TTQF Protocol Mask */
-/* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */
-#define E1000_TTQF_PROTOCOL_TCP		0x0
-/* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */
-#define E1000_TTQF_PROTOCOL_UDP		0x1
-/* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */
-#define E1000_TTQF_PROTOCOL_SCTP	0x2
-#define E1000_TTQF_PROTOCOL_SHIFT	5       /* TTQF Protocol Shift */
-#define E1000_TTQF_QUEUE_SHIFT		16      /* TTQF Queue Shfit */
-#define E1000_TTQF_RX_QUEUE_MASK	0x70000 /* TTQF Queue Mask */
-#define E1000_TTQF_MASK_ENABLE		0x10000000 /* TTQF Mask Enable Bit */
-#define E1000_IMIR_CLEAR_MASK		0xF001FFFF /* IMIR Reg Clear Mask */
-#define E1000_IMIR_PORT_BYPASS		0x20000 /* IMIR Port Bypass Bit */
-#define E1000_IMIR_PRIORITY_SHIFT	29 /* IMIR Priority Shift */
-#define E1000_IMIREXT_CLEAR_MASK	0x7FFFF /* IMIREXT Reg Clear Mask */
-
-#define E1000_MDICNFG_EXT_MDIO		0x80000000 /* MDI ext/int destination */
-#define E1000_MDICNFG_COM_MDIO		0x40000000 /* MDI shared w/ lan 0 */
-#define E1000_MDICNFG_PHY_MASK		0x03E00000
-#define E1000_MDICNFG_PHY_SHIFT		21
-
-#define E1000_MEDIA_PORT_COPPER			1
-#define E1000_MEDIA_PORT_OTHER			2
-#define E1000_M88E1112_AUTO_COPPER_SGMII	0x2
-#define E1000_M88E1112_AUTO_COPPER_BASEX	0x3
-#define E1000_M88E1112_STATUS_LINK		0x0004 /* Interface Link Bit */
-#define E1000_M88E1112_MAC_CTRL_1		0x10
-#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK	0x0380 /* Mode Select */
-#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT	7
-#define E1000_M88E1112_PAGE_ADDR		0x16
-#define E1000_M88E1112_STATUS			0x01
-
-#define E1000_THSTAT_LOW_EVENT		0x20000000 /* Low thermal threshold */
-#define E1000_THSTAT_MID_EVENT		0x00200000 /* Mid thermal threshold */
-#define E1000_THSTAT_HIGH_EVENT		0x00002000 /* High thermal threshold */
-#define E1000_THSTAT_PWR_DOWN		0x00000001 /* Power Down Event */
-#define E1000_THSTAT_LINK_THROTTLE	0x00000002 /* Link Spd Throttle Event */
-
-/* I350 EEE defines */
-#define E1000_IPCNFG_EEE_1G_AN		0x00000008 /* IPCNFG EEE Ena 1G AN */
-#define E1000_IPCNFG_EEE_100M_AN	0x00000004 /* IPCNFG EEE Ena 100M AN */
-#define E1000_EEER_TX_LPI_EN		0x00010000 /* EEER Tx LPI Enable */
-#define E1000_EEER_RX_LPI_EN		0x00020000 /* EEER Rx LPI Enable */
-#define E1000_EEER_LPI_FC		0x00040000 /* EEER Ena on Flow Cntrl */
-/* EEE status */
-#define E1000_EEER_EEE_NEG		0x20000000 /* EEE capability nego */
-#define E1000_EEER_RX_LPI_STATUS	0x40000000 /* Rx in LPI state */
-#define E1000_EEER_TX_LPI_STATUS	0x80000000 /* Tx in LPI state */
-#define E1000_EEE_LP_ADV_ADDR_I350	0x040F     /* EEE LP Advertisement */
-#define E1000_M88E1543_PAGE_ADDR	0x16       /* Page Offset Register */
-#define E1000_M88E1543_EEE_CTRL_1	0x0
-#define E1000_M88E1543_EEE_CTRL_1_MS	0x0001     /* EEE Master/Slave */
-#define E1000_EEE_ADV_DEV_I354		7
-#define E1000_EEE_ADV_ADDR_I354		60
-#define E1000_EEE_ADV_100_SUPPORTED	(1 << 1)   /* 100BaseTx EEE Supported */
-#define E1000_EEE_ADV_1000_SUPPORTED	(1 << 2)   /* 1000BaseT EEE Supported */
-#define E1000_PCS_STATUS_DEV_I354	3
-#define E1000_PCS_STATUS_ADDR_I354	1
-#define E1000_PCS_STATUS_RX_LPI_RCVD	0x0400
-#define E1000_PCS_STATUS_TX_LPI_RCVD	0x0800
-#define E1000_EEE_SU_LPI_CLK_STP	0x00800000 /* EEE LPI Clock Stop */
-#define E1000_EEE_LP_ADV_DEV_I210	7          /* EEE LP Adv Device */
-#define E1000_EEE_LP_ADV_ADDR_I210	61         /* EEE LP Adv Register */
-/* PCI Express Control */
-#define E1000_GCR_RXD_NO_SNOOP		0x00000001
-#define E1000_GCR_RXDSCW_NO_SNOOP	0x00000002
-#define E1000_GCR_RXDSCR_NO_SNOOP	0x00000004
-#define E1000_GCR_TXD_NO_SNOOP		0x00000008
-#define E1000_GCR_TXDSCW_NO_SNOOP	0x00000010
-#define E1000_GCR_TXDSCR_NO_SNOOP	0x00000020
-#define E1000_GCR_CMPL_TMOUT_MASK	0x0000F000
-#define E1000_GCR_CMPL_TMOUT_10ms	0x00001000
-#define E1000_GCR_CMPL_TMOUT_RESEND	0x00010000
-#define E1000_GCR_CAP_VER2		0x00040000
-
-#define PCIE_NO_SNOOP_ALL	(E1000_GCR_RXD_NO_SNOOP | \
-				 E1000_GCR_RXDSCW_NO_SNOOP | \
-				 E1000_GCR_RXDSCR_NO_SNOOP | \
-				 E1000_GCR_TXD_NO_SNOOP    | \
-				 E1000_GCR_TXDSCW_NO_SNOOP | \
-				 E1000_GCR_TXDSCR_NO_SNOOP)
-
-#define E1000_MMDAC_FUNC_DATA	0x4000 /* Data, no post increment */
-
-/* mPHY address control and data registers */
-#define E1000_MPHY_ADDR_CTL		0x0024 /* Address Control Reg */
-#define E1000_MPHY_ADDR_CTL_OFFSET_MASK	0xFFFF0000
-#define E1000_MPHY_DATA			0x0E10 /* Data Register */
-
-/* AFE CSR Offset for PCS CLK */
-#define E1000_MPHY_PCS_CLK_REG_OFFSET	0x0004
-/* Override for near end digital loopback. */
-#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN	0x10
-
-/* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB	0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE	0x0080  /* Collision test enable */
-#define MII_CR_FULL_DUPLEX	0x0100  /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG	0x0200  /* Restart auto negotiation */
-#define MII_CR_ISOLATE		0x0400  /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN	0x0800  /* Power down */
-#define MII_CR_AUTO_NEG_EN	0x1000  /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB	0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK		0x4000  /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET		0x8000  /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000	0x0040
-#define MII_CR_SPEED_100	0x2000
-#define MII_CR_SPEED_10		0x0000
-
-/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS	0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT	0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS	0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS	0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT	0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE	0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS	0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS	0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS	0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS	0x0800 /* 10T   Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS	0x1000 /* 10T   Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS	0x2000 /* 100X  Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS	0x4000 /* 100X  Full Duplex Capable */
-#define MII_SR_100T4_CAPS	0x8000 /* 100T4 Capable */
-
-/* Autoneg Advertisement Register */
-#define NWAY_AR_SELECTOR_FIELD	0x0001   /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS	0x0020   /* 10T   Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS	0x0040   /* 10T   Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS	0x0080   /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS	0x0100   /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS	0x0200   /* 100T4 Capable */
-#define NWAY_AR_PAUSE		0x0400   /* Pause operation desired */
-#define NWAY_AR_ASM_DIR		0x0800   /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT	0x2000   /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE	0x8000   /* Next Page ability supported */
-
-/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_SELECTOR_FIELD	0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS		0x0020 /* LP 10T Half Dplx Capable */
-#define NWAY_LPAR_10T_FD_CAPS		0x0040 /* LP 10T Full Dplx Capable */
-#define NWAY_LPAR_100TX_HD_CAPS		0x0080 /* LP 100TX Half Dplx Capable */
-#define NWAY_LPAR_100TX_FD_CAPS		0x0100 /* LP 100TX Full Dplx Capable */
-#define NWAY_LPAR_100T4_CAPS		0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE			0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR		0x0800 /* LP Asym Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT		0x2000 /* LP detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE		0x4000 /* LP rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE		0x8000 /* Next Page ability supported */
-
-/* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS		0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD		0x0002 /* LP 10T Half Dplx Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS		0x0004 /* LP 10T Full Dplx Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS	0x0008 /* LP 100TX Half Dplx Capable */
-#define NWAY_ER_PAR_DETECT_FAULT	0x0010 /* LP 100TX Full Dplx Capable */
-
-/* 1000BASE-T Control Register */
-#define CR_1000T_ASYM_PAUSE	0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS	0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS	0x0200 /* Advertise 1000T FD capability  */
-/* 1=Repeater/switch device port 0=DTE device */
-#define CR_1000T_REPEATER_DTE	0x0400
-/* 1=Configure PHY as Master 0=Configure PHY as Slave */
-#define CR_1000T_MS_VALUE	0x0800
-/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
-#define CR_1000T_MS_ENABLE	0x1000
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1	0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2	0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3	0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4	0x8000 /* Transmitter Distortion test */
-
-/* 1000BASE-T Status Register */
-#define SR_1000T_IDLE_ERROR_CNT		0x00FF /* Num idle err since last rd */
-#define SR_1000T_ASYM_PAUSE_DIR		0x0100 /* LP asym pause direction bit */
-#define SR_1000T_LP_HD_CAPS		0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS		0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS	0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS	0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES		0x4000 /* 1=Local Tx Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT	0x8000 /* Master/Slave config fault */
-
-#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT	5
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-#define PHY_CONTROL		0x00 /* Control Register */
-#define PHY_STATUS		0x01 /* Status Register */
-#define PHY_ID1			0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2			0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV		0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY		0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP		0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX	0x07 /* Next Page Tx */
-#define PHY_LP_NEXT_PAGE	0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL		0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS	0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS		0x0F /* Extended Status Reg */
-
-#define PHY_CONTROL_LB		0x4000 /* PHY Loopback bit */
-
-/* NVM Control */
-#define E1000_EECD_SK		0x00000001 /* NVM Clock */
-#define E1000_EECD_CS		0x00000002 /* NVM Chip Select */
-#define E1000_EECD_DI		0x00000004 /* NVM Data In */
-#define E1000_EECD_DO		0x00000008 /* NVM Data Out */
-#define E1000_EECD_REQ		0x00000040 /* NVM Access Request */
-#define E1000_EECD_GNT		0x00000080 /* NVM Access Grant */
-#define E1000_EECD_PRES		0x00000100 /* NVM Present */
-#define E1000_EECD_SIZE		0x00000200 /* NVM Size (0=64 word 1=256 word) */
-#define E1000_EECD_BLOCKED	0x00008000 /* Bit banging access blocked flag */
-#define E1000_EECD_ABORT	0x00010000 /* NVM operation aborted flag */
-#define E1000_EECD_TIMEOUT	0x00020000 /* NVM read operation timeout flag */
-#define E1000_EECD_ERROR_CLR	0x00040000 /* NVM error status clear bit */
-/* NVM Addressing bits based on type 0=small, 1=large */
-#define E1000_EECD_ADDR_BITS	0x00000400
-#define E1000_NVM_GRANT_ATTEMPTS	1000 /* NVM # attempts to gain grant */
-#define E1000_EECD_AUTO_RD		0x00000200  /* NVM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK		0x00007800  /* NVM Size */
-#define E1000_EECD_SIZE_EX_SHIFT	11
-#define E1000_EECD_FLUPD		0x00080000 /* Update FLASH */
-#define E1000_EECD_AUPDEN		0x00100000 /* Ena Auto FLASH update */
-#define E1000_EECD_SEC1VAL		0x00400000 /* Sector One Valid */
-#define E1000_EECD_SEC1VAL_VALID_MASK	(E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-#define E1000_EECD_FLUPD_I210		0x00800000 /* Update FLASH */
-#define E1000_EECD_FLUDONE_I210		0x04000000 /* Update FLASH done */
-#define E1000_EECD_FLASH_DETECTED_I210	0x00080000 /* FLASH detected */
-#define E1000_EECD_SEC1VAL_I210		0x02000000 /* Sector One Valid */
-#define E1000_FLUDONE_ATTEMPTS		20000
-#define E1000_EERD_EEWR_MAX_COUNT	512 /* buffered EEPROM words rw */
-#define E1000_I210_FIFO_SEL_RX		0x00
-#define E1000_I210_FIFO_SEL_TX_QAV(_i)	(0x02 + (_i))
-#define E1000_I210_FIFO_SEL_TX_LEGACY	E1000_I210_FIFO_SEL_TX_QAV(0)
-#define E1000_I210_FIFO_SEL_BMC2OS_TX	0x06
-#define E1000_I210_FIFO_SEL_BMC2OS_RX	0x01
-
-#define E1000_I210_FLASH_SECTOR_SIZE	0x1000 /* 4KB FLASH sector unit size */
-/* Secure FLASH mode requires removing MSb */
-#define E1000_I210_FW_PTR_MASK		0x7FFF
-/* Firmware code revision field word offset*/
-#define E1000_I210_FW_VER_OFFSET	328
-
-#define E1000_NVM_RW_REG_DATA	16  /* Offset to data in NVM read/write regs */
-#define E1000_NVM_RW_REG_DONE	2   /* Offset to READ/WRITE done bit */
-#define E1000_NVM_RW_REG_START	1   /* Start operation */
-#define E1000_NVM_RW_ADDR_SHIFT	2   /* Shift to the address bits */
-#define E1000_NVM_POLL_WRITE	1   /* Flag for polling for write complete */
-#define E1000_NVM_POLL_READ	0   /* Flag for polling for read complete */
-#define E1000_FLASH_UPDATES	2000
-
-/* NVM Word Offsets */
-#define NVM_COMPAT			0x0003
-#define NVM_ID_LED_SETTINGS		0x0004
-#define NVM_VERSION			0x0005
-#define E1000_I210_NVM_FW_MODULE_PTR	0x0010
-#define E1000_I350_NVM_FW_MODULE_PTR	0x0051
-#define NVM_FUTURE_INIT_WORD1		0x0019
-#define NVM_ETRACK_WORD			0x0042
-#define NVM_ETRACK_HIWORD		0x0043
-#define NVM_COMB_VER_OFF		0x0083
-#define NVM_COMB_VER_PTR		0x003d
-
-/* NVM version defines */
-#define NVM_MAJOR_MASK			0xF000
-#define NVM_MINOR_MASK			0x0FF0
-#define NVM_IMAGE_ID_MASK		0x000F
-#define NVM_COMB_VER_MASK		0x00FF
-#define NVM_MAJOR_SHIFT			12
-#define NVM_MINOR_SHIFT			4
-#define NVM_COMB_VER_SHFT		8
-#define NVM_VER_INVALID			0xFFFF
-#define NVM_ETRACK_SHIFT		16
-#define NVM_ETRACK_VALID		0x8000
-#define NVM_NEW_DEC_MASK		0x0F00
-#define NVM_HEX_CONV			16
-#define NVM_HEX_TENS			10
-
-/* FW version defines */
-/* Offset of "Loader patch ptr" in Firmware Header */
-#define E1000_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET	0x01
-/* Patch generation hour & minutes */
-#define E1000_I350_NVM_FW_VER_WORD1_OFFSET		0x04
-/* Patch generation month & day */
-#define E1000_I350_NVM_FW_VER_WORD2_OFFSET		0x05
-/* Patch generation year */
-#define E1000_I350_NVM_FW_VER_WORD3_OFFSET		0x06
-/* Patch major & minor numbers */
-#define E1000_I350_NVM_FW_VER_WORD4_OFFSET		0x07
-
-#define NVM_MAC_ADDR			0x0000
-#define NVM_SUB_DEV_ID			0x000B
-#define NVM_SUB_VEN_ID			0x000C
-#define NVM_DEV_ID			0x000D
-#define NVM_VEN_ID			0x000E
-#define NVM_INIT_CTRL_2			0x000F
-#define NVM_INIT_CTRL_4			0x0013
-#define NVM_LED_1_CFG			0x001C
-#define NVM_LED_0_2_CFG			0x001F
-
-#define NVM_COMPAT_VALID_CSUM		0x0001
-#define NVM_FUTURE_INIT_WORD1_VALID_CSUM	0x0040
-
-#define NVM_ETS_CFG			0x003E
-#define NVM_ETS_LTHRES_DELTA_MASK	0x07C0
-#define NVM_ETS_LTHRES_DELTA_SHIFT	6
-#define NVM_ETS_TYPE_MASK		0x0038
-#define NVM_ETS_TYPE_SHIFT		3
-#define NVM_ETS_TYPE_EMC		0x000
-#define NVM_ETS_NUM_SENSORS_MASK	0x0007
-#define NVM_ETS_DATA_LOC_MASK		0x3C00
-#define NVM_ETS_DATA_LOC_SHIFT		10
-#define NVM_ETS_DATA_INDEX_MASK		0x0300
-#define NVM_ETS_DATA_INDEX_SHIFT	8
-#define NVM_ETS_DATA_HTHRESH_MASK	0x00FF
-#define NVM_INIT_CONTROL2_REG		0x000F
-#define NVM_INIT_CONTROL3_PORT_B	0x0014
-#define NVM_INIT_3GIO_3			0x001A
-#define NVM_SWDEF_PINS_CTRL_PORT_0	0x0020
-#define NVM_INIT_CONTROL3_PORT_A	0x0024
-#define NVM_CFG				0x0012
-#define NVM_ALT_MAC_ADDR_PTR		0x0037
-#define NVM_CHECKSUM_REG		0x003F
-#define NVM_COMPATIBILITY_REG_3		0x0003
-#define NVM_COMPATIBILITY_BIT_MASK	0x8000
-
-#define E1000_NVM_CFG_DONE_PORT_0	0x040000 /* MNG config cycle done */
-#define E1000_NVM_CFG_DONE_PORT_1	0x080000 /* ...for second port */
-#define E1000_NVM_CFG_DONE_PORT_2	0x100000 /* ...for third port */
-#define E1000_NVM_CFG_DONE_PORT_3	0x200000 /* ...for fourth port */
-
-#define NVM_82580_LAN_FUNC_OFFSET(a)	((a) ? (0x40 + (0x40 * (a))) : 0)
-
-/* Mask bits for fields in Word 0x24 of the NVM */
-#define NVM_WORD24_COM_MDIO		0x0008 /* MDIO interface shared */
-#define NVM_WORD24_EXT_MDIO		0x0004 /* MDIO accesses routed extrnl */
-/* Offset of Link Mode bits for 82575/82576 */
-#define NVM_WORD24_LNK_MODE_OFFSET	8
-/* Offset of Link Mode bits for 82580 up */
-#define NVM_WORD24_82580_LNK_MODE_OFFSET	4
-
-
-/* Mask bits for fields in Word 0x0f of the NVM */
-#define NVM_WORD0F_PAUSE_MASK		0x3000
-#define NVM_WORD0F_PAUSE		0x1000
-#define NVM_WORD0F_ASM_DIR		0x2000
-
-/* Mask bits for fields in Word 0x1a of the NVM */
-#define NVM_WORD1A_ASPM_MASK		0x000C
-
-/* Mask bits for fields in Word 0x03 of the EEPROM */
-#define NVM_COMPAT_LOM			0x0800
-
-/* length of string needed to store PBA number */
-#define E1000_PBANUM_LENGTH		11
-
-/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
-#define NVM_SUM				0xBABA
-
-/* PBA (printed board assembly) number words */
-#define NVM_PBA_OFFSET_0		8
-#define NVM_PBA_OFFSET_1		9
-#define NVM_PBA_PTR_GUARD		0xFAFA
-#define NVM_RESERVED_WORD		0xFFFF
-#define NVM_WORD_SIZE_BASE_SHIFT	6
-
-/* NVM Commands - SPI */
-#define NVM_MAX_RETRY_SPI	5000 /* Max wait of 5ms, for RDY signal */
-#define NVM_READ_OPCODE_SPI	0x03 /* NVM read opcode */
-#define NVM_WRITE_OPCODE_SPI	0x02 /* NVM write opcode */
-#define NVM_A8_OPCODE_SPI	0x08 /* opcode bit-3 = address bit-8 */
-#define NVM_WREN_OPCODE_SPI	0x06 /* NVM set Write Enable latch */
-#define NVM_RDSR_OPCODE_SPI	0x05 /* NVM read Status register */
-
-/* SPI NVM Status Register */
-#define NVM_STATUS_RDY_SPI	0x01
-
-/* Word definitions for ID LED Settings */
-#define ID_LED_RESERVED_0000	0x0000
-#define ID_LED_RESERVED_FFFF	0xFFFF
-#define ID_LED_DEFAULT		((ID_LED_OFF1_ON2  << 12) | \
-				 (ID_LED_OFF1_OFF2 <<  8) | \
-				 (ID_LED_DEF1_DEF2 <<  4) | \
-				 (ID_LED_DEF1_DEF2))
-#define ID_LED_DEF1_DEF2	0x1
-#define ID_LED_DEF1_ON2		0x2
-#define ID_LED_DEF1_OFF2	0x3
-#define ID_LED_ON1_DEF2		0x4
-#define ID_LED_ON1_ON2		0x5
-#define ID_LED_ON1_OFF2		0x6
-#define ID_LED_OFF1_DEF2	0x7
-#define ID_LED_OFF1_ON2		0x8
-#define ID_LED_OFF1_OFF2	0x9
-
-#define IGP_ACTIVITY_LED_MASK	0xFFFFF0FF
-#define IGP_ACTIVITY_LED_ENABLE	0x0300
-#define IGP_LED3_MODE		0x07000000
-
-/* PCI/PCI-X/PCI-EX Config space */
-#define PCI_HEADER_TYPE_REGISTER	0x0E
-#define PCIE_LINK_STATUS		0x12
-#define PCIE_DEVICE_CONTROL2		0x28
-
-#define PCI_HEADER_TYPE_MULTIFUNC	0x80
-#define PCIE_LINK_WIDTH_MASK		0x3F0
-#define PCIE_LINK_WIDTH_SHIFT		4
-#define PCIE_LINK_SPEED_MASK		0x0F
-#define PCIE_LINK_SPEED_2500		0x01
-#define PCIE_LINK_SPEED_5000		0x02
-#define PCIE_DEVICE_CONTROL2_16ms	0x0005
-
-#ifndef ETH_ADDR_LEN
-#define ETH_ADDR_LEN			6
-#endif
-
-#define PHY_REVISION_MASK		0xFFFFFFF0
-#define MAX_PHY_REG_ADDRESS		0x1F  /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG		0xF
-
-/* Bit definitions for valid PHY IDs.
- * I = Integrated
- * E = External
- */
-#define M88E1000_E_PHY_ID	0x01410C50
-#define M88E1000_I_PHY_ID	0x01410C30
-#define M88E1011_I_PHY_ID	0x01410C20
-#define IGP01E1000_I_PHY_ID	0x02A80380
-#define M88E1111_I_PHY_ID	0x01410CC0
-#define M88E1543_E_PHY_ID	0x01410EA0
-#define M88E1112_E_PHY_ID	0x01410C90
-#define I347AT4_E_PHY_ID	0x01410DC0
-#define M88E1340M_E_PHY_ID	0x01410DF0
-#define GG82563_E_PHY_ID	0x01410CA0
-#define IGP03E1000_E_PHY_ID	0x02A80390
-#define IFE_E_PHY_ID		0x02A80330
-#define IFE_PLUS_E_PHY_ID	0x02A80320
-#define IFE_C_E_PHY_ID		0x02A80310
-#define I82580_I_PHY_ID		0x015403A0
-#define I350_I_PHY_ID		0x015403B0
-#define I210_I_PHY_ID		0x01410C00
-#define IGP04E1000_E_PHY_ID	0x02A80391
-#define M88_VENDOR		0x0141
-
-/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL		0x10  /* PHY Specific Control Reg */
-#define M88E1000_PHY_SPEC_STATUS	0x11  /* PHY Specific Status Reg */
-#define M88E1000_EXT_PHY_SPEC_CTRL	0x14  /* Extended PHY Specific Cntrl */
-#define M88E1000_RX_ERR_CNTR		0x15  /* Receive Error Counter */
-
-#define M88E1000_PHY_PAGE_SELECT	0x1D  /* Reg 29 for pg number setting */
-#define M88E1000_PHY_GEN_CONTROL	0x1E  /* meaning depends on reg 29 */
-
-/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_POLARITY_REVERSAL	0x0002 /* 1=Polarity Reverse enabled */
-/* MDI Crossover Mode bits 6:5 Manual MDI configuration */
-#define M88E1000_PSCR_MDI_MANUAL_MODE	0x0000
-#define M88E1000_PSCR_MDIX_MANUAL_MODE	0x0020  /* Manual MDIX configuration */
-/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define M88E1000_PSCR_AUTO_X_1000T	0x0040
-/* Auto crossover enabled all speeds */
-#define M88E1000_PSCR_AUTO_X_MODE	0x0060
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX	0x0800 /* 1=Assert CRS on Tx */
-
-/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_REV_POLARITY	0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT		0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX		0x0040 /* 1=MDIX; 0=MDI */
-/* 0 = <50M
- * 1 = 50-80M
- * 2 = 80-110M
- * 3 = 110-140M
- * 4 = >140M
- */
-#define M88E1000_PSSR_CABLE_LENGTH	0x0380
-#define M88E1000_PSSR_LINK		0x0400 /* 1=Link up, 0=Link down */
-#define M88E1000_PSSR_SPD_DPLX_RESOLVED	0x0800 /* 1=Speed & Duplex resolved */
-#define M88E1000_PSSR_SPEED		0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_1000MBS		0x8000 /* 10=1000Mbs */
-
-#define M88E1000_PSSR_CABLE_LENGTH_SHIFT	7
-
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the master
- */
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK	0x0C00
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X	0x0000
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the slave
- */
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK	0x0300
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X	0x0100
-#define M88E1000_EPSCR_TX_CLK_25	0x0070 /* 25  MHz TX_CLK */
-
-/* Intel I347AT4 Registers */
-#define I347AT4_PCDL		0x10 /* PHY Cable Diagnostics Length */
-#define I347AT4_PCDC		0x15 /* PHY Cable Diagnostics Control */
-#define I347AT4_PAGE_SELECT	0x16
-
-/* I347AT4 Extended PHY Specific Control Register */
-
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the master
- */
-#define I347AT4_PSCR_DOWNSHIFT_ENABLE	0x0800
-#define I347AT4_PSCR_DOWNSHIFT_MASK	0x7000
-#define I347AT4_PSCR_DOWNSHIFT_1X	0x0000
-#define I347AT4_PSCR_DOWNSHIFT_2X	0x1000
-#define I347AT4_PSCR_DOWNSHIFT_3X	0x2000
-#define I347AT4_PSCR_DOWNSHIFT_4X	0x3000
-#define I347AT4_PSCR_DOWNSHIFT_5X	0x4000
-#define I347AT4_PSCR_DOWNSHIFT_6X	0x5000
-#define I347AT4_PSCR_DOWNSHIFT_7X	0x6000
-#define I347AT4_PSCR_DOWNSHIFT_8X	0x7000
-
-/* I347AT4 PHY Cable Diagnostics Control */
-#define I347AT4_PCDC_CABLE_LENGTH_UNIT	0x0400 /* 0=cm 1=meters */
-
-/* M88E1112 only registers */
-#define M88E1112_VCT_DSP_DISTANCE	0x001A
-
-/* M88EC018 Rev 2 specific DownShift settings */
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK	0x0E00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X	0x0800
-
-/* Bits...
- * 15-5: page
- * 4-0: register offset
- */
-#define GG82563_PAGE_SHIFT	5
-#define GG82563_REG(page, reg)	\
-	(((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
-#define GG82563_MIN_ALT_REG	30
-
-/* GG82563 Specific Registers */
-#define GG82563_PHY_SPEC_CTRL		GG82563_REG(0, 16) /* PHY Spec Cntrl */
-#define GG82563_PHY_PAGE_SELECT		GG82563_REG(0, 22) /* Page Select */
-#define GG82563_PHY_SPEC_CTRL_2		GG82563_REG(0, 26) /* PHY Spec Cntrl2 */
-#define GG82563_PHY_PAGE_SELECT_ALT	GG82563_REG(0, 29) /* Alt Page Select */
-
-/* MAC Specific Control Register */
-#define GG82563_PHY_MAC_SPEC_CTRL	GG82563_REG(2, 21)
-
-#define GG82563_PHY_DSP_DISTANCE	GG82563_REG(5, 26) /* DSP Distance */
-
-/* Page 193 - Port Control Registers */
-/* Kumeran Mode Control */
-#define GG82563_PHY_KMRN_MODE_CTRL	GG82563_REG(193, 16)
-#define GG82563_PHY_PWR_MGMT_CTRL	GG82563_REG(193, 20) /* Pwr Mgt Ctrl */
-
-/* Page 194 - KMRN Registers */
-#define GG82563_PHY_INBAND_CTRL		GG82563_REG(194, 18) /* Inband Ctrl */
-
-/* MDI Control */
-#define E1000_MDIC_REG_MASK	0x001F0000
-#define E1000_MDIC_REG_SHIFT	16
-#define E1000_MDIC_PHY_MASK	0x03E00000
-#define E1000_MDIC_PHY_SHIFT	21
-#define E1000_MDIC_OP_WRITE	0x04000000
-#define E1000_MDIC_OP_READ	0x08000000
-#define E1000_MDIC_READY	0x10000000
-#define E1000_MDIC_ERROR	0x40000000
-#define E1000_MDIC_DEST		0x80000000
-
-/* SerDes Control */
-#define E1000_GEN_CTL_READY		0x80000000
-#define E1000_GEN_CTL_ADDRESS_SHIFT	8
-#define E1000_GEN_POLL_TIMEOUT		640
-
-/* LinkSec register fields */
-#define E1000_LSECTXCAP_SUM_MASK	0x00FF0000
-#define E1000_LSECTXCAP_SUM_SHIFT	16
-#define E1000_LSECRXCAP_SUM_MASK	0x00FF0000
-#define E1000_LSECRXCAP_SUM_SHIFT	16
-
-#define E1000_LSECTXCTRL_EN_MASK	0x00000003
-#define E1000_LSECTXCTRL_DISABLE	0x0
-#define E1000_LSECTXCTRL_AUTH		0x1
-#define E1000_LSECTXCTRL_AUTH_ENCRYPT	0x2
-#define E1000_LSECTXCTRL_AISCI		0x00000020
-#define E1000_LSECTXCTRL_PNTHRSH_MASK	0xFFFFFF00
-#define E1000_LSECTXCTRL_RSV_MASK	0x000000D8
-
-#define E1000_LSECRXCTRL_EN_MASK	0x0000000C
-#define E1000_LSECRXCTRL_EN_SHIFT	2
-#define E1000_LSECRXCTRL_DISABLE	0x0
-#define E1000_LSECRXCTRL_CHECK		0x1
-#define E1000_LSECRXCTRL_STRICT		0x2
-#define E1000_LSECRXCTRL_DROP		0x3
-#define E1000_LSECRXCTRL_PLSH		0x00000040
-#define E1000_LSECRXCTRL_RP		0x00000080
-#define E1000_LSECRXCTRL_RSV_MASK	0xFFFFFF33
-
-/* Tx Rate-Scheduler Config fields */
-#define E1000_RTTBCNRC_RS_ENA		0x80000000
-#define E1000_RTTBCNRC_RF_DEC_MASK	0x00003FFF
-#define E1000_RTTBCNRC_RF_INT_SHIFT	14
-#define E1000_RTTBCNRC_RF_INT_MASK	\
-	(E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
-
-/* DMA Coalescing register fields */
-/* DMA Coalescing Watchdog Timer */
-#define E1000_DMACR_DMACWT_MASK		0x00003FFF
-/* DMA Coalescing Rx Threshold */
-#define E1000_DMACR_DMACTHR_MASK	0x00FF0000
-#define E1000_DMACR_DMACTHR_SHIFT	16
-/* Lx when no PCIe transactions */
-#define E1000_DMACR_DMAC_LX_MASK	0x30000000
-#define E1000_DMACR_DMAC_LX_SHIFT	28
-#define E1000_DMACR_DMAC_EN		0x80000000 /* Enable DMA Coalescing */
-/* DMA Coalescing BMC-to-OS Watchdog Enable */
-#define E1000_DMACR_DC_BMC2OSW_EN	0x00008000
-
-/* DMA Coalescing Transmit Threshold */
-#define E1000_DMCTXTH_DMCTTHR_MASK	0x00000FFF
-
-#define E1000_DMCTLX_TTLX_MASK		0x00000FFF /* Time to LX request */
-
-/* Rx Traffic Rate Threshold */
-#define E1000_DMCRTRH_UTRESH_MASK	0x0007FFFF
-/* Rx packet rate in current window */
-#define E1000_DMCRTRH_LRPRCW		0x80000000
-
-/* DMA Coal Rx Traffic Current Count */
-#define E1000_DMCCNT_CCOUNT_MASK	0x01FFFFFF
-
-/* Flow ctrl Rx Threshold High val */
-#define E1000_FCRTC_RTH_COAL_MASK	0x0003FFF0
-#define E1000_FCRTC_RTH_COAL_SHIFT	4
-/* Lx power decision based on DMA coal */
-#define E1000_PCIEMISC_LX_DECISION	0x00000080
-
-#define E1000_RXPBS_CFG_TS_EN		0x80000000 /* Timestamp in Rx buffer */
-#define E1000_RXPBS_SIZE_I210_MASK	0x0000003F /* Rx packet buffer size */
-#define E1000_TXPB0S_SIZE_I210_MASK	0x0000003F /* Tx packet buffer 0 size */
-
-/* Proxy Filter Control */
-#define E1000_PROXYFC_D0		0x00000001 /* Enable offload in D0 */
-#define E1000_PROXYFC_EX		0x00000004 /* Directed exact proxy */
-#define E1000_PROXYFC_MC		0x00000008 /* Directed MC Proxy */
-#define E1000_PROXYFC_BC		0x00000010 /* Broadcast Proxy Enable */
-#define E1000_PROXYFC_ARP_DIRECTED	0x00000020 /* Directed ARP Proxy Ena */
-#define E1000_PROXYFC_IPV4		0x00000040 /* Directed IPv4 Enable */
-#define E1000_PROXYFC_IPV6		0x00000080 /* Directed IPv6 Enable */
-#define E1000_PROXYFC_NS		0x00000200 /* IPv6 Neighbor Solicitation */
-#define E1000_PROXYFC_ARP		0x00000800 /* ARP Request Proxy Ena */
-/* Proxy Status */
-#define E1000_PROXYS_CLEAR		0xFFFFFFFF /* Clear */
-
-/* Firmware Status */
-#define E1000_FWSTS_FWRI		0x80000000 /* FW Reset Indication */
-/* VF Control */
-#define E1000_VTCTRL_RST		0x04000000 /* Reset VF */
-
-#define E1000_STATUS_LAN_ID_MASK	0x00000000C /* Mask for Lan ID field */
-/* Lan ID bit field offset in status register */
-#define E1000_STATUS_LAN_ID_OFFSET	2
-#define E1000_VFTA_ENTRIES		128
-#ifndef E1000_UNUSEDARG
-#define E1000_UNUSEDARG
-#endif /* E1000_UNUSEDARG */
-#endif /* _E1000_DEFINES_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_hw.h b/kernel/linux/kni/ethtool/igb/e1000_hw.h
deleted file mode 100644
index ed43ef5a1..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_hw.h
+++ /dev/null
@@ -1,778 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_HW_H_
-#define _E1000_HW_H_
-
-#include "e1000_osdep.h"
-#include "e1000_regs.h"
-#include "e1000_defines.h"
-
-struct e1000_hw;
-
-#define E1000_DEV_ID_82576			0x10C9
-#define E1000_DEV_ID_82576_FIBER		0x10E6
-#define E1000_DEV_ID_82576_SERDES		0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER		0x10E8
-#define E1000_DEV_ID_82576_QUAD_COPPER_ET2	0x1526
-#define E1000_DEV_ID_82576_NS			0x150A
-#define E1000_DEV_ID_82576_NS_SERDES		0x1518
-#define E1000_DEV_ID_82576_SERDES_QUAD		0x150D
-#define E1000_DEV_ID_82575EB_COPPER		0x10A7
-#define E1000_DEV_ID_82575EB_FIBER_SERDES	0x10A9
-#define E1000_DEV_ID_82575GB_QUAD_COPPER	0x10D6
-#define E1000_DEV_ID_82580_COPPER		0x150E
-#define E1000_DEV_ID_82580_FIBER		0x150F
-#define E1000_DEV_ID_82580_SERDES		0x1510
-#define E1000_DEV_ID_82580_SGMII		0x1511
-#define E1000_DEV_ID_82580_COPPER_DUAL		0x1516
-#define E1000_DEV_ID_82580_QUAD_FIBER		0x1527
-#define E1000_DEV_ID_I350_COPPER		0x1521
-#define E1000_DEV_ID_I350_FIBER			0x1522
-#define E1000_DEV_ID_I350_SERDES		0x1523
-#define E1000_DEV_ID_I350_SGMII			0x1524
-#define E1000_DEV_ID_I350_DA4			0x1546
-#define E1000_DEV_ID_I210_COPPER		0x1533
-#define E1000_DEV_ID_I210_COPPER_OEM1		0x1534
-#define E1000_DEV_ID_I210_COPPER_IT		0x1535
-#define E1000_DEV_ID_I210_FIBER			0x1536
-#define E1000_DEV_ID_I210_SERDES		0x1537
-#define E1000_DEV_ID_I210_SGMII			0x1538
-#define E1000_DEV_ID_I210_COPPER_FLASHLESS	0x157B
-#define E1000_DEV_ID_I210_SERDES_FLASHLESS	0x157C
-#define E1000_DEV_ID_I211_COPPER		0x1539
-#define E1000_DEV_ID_I354_BACKPLANE_1GBPS	0x1F40
-#define E1000_DEV_ID_I354_SGMII			0x1F41
-#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS	0x1F45
-#define E1000_DEV_ID_DH89XXCC_SGMII		0x0438
-#define E1000_DEV_ID_DH89XXCC_SERDES		0x043A
-#define E1000_DEV_ID_DH89XXCC_BACKPLANE		0x043C
-#define E1000_DEV_ID_DH89XXCC_SFP		0x0440
-
-#define E1000_REVISION_0	0
-#define E1000_REVISION_1	1
-#define E1000_REVISION_2	2
-#define E1000_REVISION_3	3
-#define E1000_REVISION_4	4
-
-#define E1000_FUNC_0		0
-#define E1000_FUNC_1		1
-#define E1000_FUNC_2		2
-#define E1000_FUNC_3		3
-
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0	0
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1	3
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2	6
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3	9
-
-enum e1000_mac_type {
-	e1000_undefined = 0,
-	e1000_82575,
-	e1000_82576,
-	e1000_82580,
-	e1000_i350,
-	e1000_i354,
-	e1000_i210,
-	e1000_i211,
-	e1000_num_macs  /* List is 1-based, so subtract 1 for true count. */
-};
-
-enum e1000_media_type {
-	e1000_media_type_unknown = 0,
-	e1000_media_type_copper = 1,
-	e1000_media_type_fiber = 2,
-	e1000_media_type_internal_serdes = 3,
-	e1000_num_media_types
-};
-
-enum e1000_nvm_type {
-	e1000_nvm_unknown = 0,
-	e1000_nvm_none,
-	e1000_nvm_eeprom_spi,
-	e1000_nvm_flash_hw,
-	e1000_nvm_invm,
-	e1000_nvm_flash_sw
-};
-
-enum e1000_nvm_override {
-	e1000_nvm_override_none = 0,
-	e1000_nvm_override_spi_small,
-	e1000_nvm_override_spi_large,
-};
-
-enum e1000_phy_type {
-	e1000_phy_unknown = 0,
-	e1000_phy_none,
-	e1000_phy_m88,
-	e1000_phy_igp,
-	e1000_phy_igp_2,
-	e1000_phy_gg82563,
-	e1000_phy_igp_3,
-	e1000_phy_ife,
-	e1000_phy_82580,
-	e1000_phy_vf,
-	e1000_phy_i210,
-};
-
-enum e1000_bus_type {
-	e1000_bus_type_unknown = 0,
-	e1000_bus_type_pci,
-	e1000_bus_type_pcix,
-	e1000_bus_type_pci_express,
-	e1000_bus_type_reserved
-};
-
-enum e1000_bus_speed {
-	e1000_bus_speed_unknown = 0,
-	e1000_bus_speed_33,
-	e1000_bus_speed_66,
-	e1000_bus_speed_100,
-	e1000_bus_speed_120,
-	e1000_bus_speed_133,
-	e1000_bus_speed_2500,
-	e1000_bus_speed_5000,
-	e1000_bus_speed_reserved
-};
-
-enum e1000_bus_width {
-	e1000_bus_width_unknown = 0,
-	e1000_bus_width_pcie_x1,
-	e1000_bus_width_pcie_x2,
-	e1000_bus_width_pcie_x4 = 4,
-	e1000_bus_width_pcie_x8 = 8,
-	e1000_bus_width_32,
-	e1000_bus_width_64,
-	e1000_bus_width_reserved
-};
-
-enum e1000_1000t_rx_status {
-	e1000_1000t_rx_status_not_ok = 0,
-	e1000_1000t_rx_status_ok,
-	e1000_1000t_rx_status_undefined = 0xFF
-};
-
-enum e1000_rev_polarity {
-	e1000_rev_polarity_normal = 0,
-	e1000_rev_polarity_reversed,
-	e1000_rev_polarity_undefined = 0xFF
-};
-
-enum e1000_fc_mode {
-	e1000_fc_none = 0,
-	e1000_fc_rx_pause,
-	e1000_fc_tx_pause,
-	e1000_fc_full,
-	e1000_fc_default = 0xFF
-};
-
-enum e1000_ms_type {
-	e1000_ms_hw_default = 0,
-	e1000_ms_force_master,
-	e1000_ms_force_slave,
-	e1000_ms_auto
-};
-
-enum e1000_smart_speed {
-	e1000_smart_speed_default = 0,
-	e1000_smart_speed_on,
-	e1000_smart_speed_off
-};
-
-enum e1000_serdes_link_state {
-	e1000_serdes_link_down = 0,
-	e1000_serdes_link_autoneg_progress,
-	e1000_serdes_link_autoneg_complete,
-	e1000_serdes_link_forced_up
-};
-
-#ifndef __le16
-#define __le16 u16
-#endif
-#ifndef __le32
-#define __le32 u32
-#endif
-#ifndef __le64
-#define __le64 u64
-#endif
-/* Receive Descriptor */
-struct e1000_rx_desc {
-	__le64 buffer_addr; /* Address of the descriptor's data buffer */
-	__le16 length;      /* Length of data DMAed into data buffer */
-	__le16 csum; /* Packet checksum */
-	u8  status;  /* Descriptor status */
-	u8  errors;  /* Descriptor Errors */
-	__le16 special;
-};
-
-/* Receive Descriptor - Extended */
-union e1000_rx_desc_extended {
-	struct {
-		__le64 buffer_addr;
-		__le64 reserved;
-	} read;
-	struct {
-		struct {
-			__le32 mrq; /* Multiple Rx Queues */
-			union {
-				__le32 rss; /* RSS Hash */
-				struct {
-					__le16 ip_id;  /* IP id */
-					__le16 csum;   /* Packet Checksum */
-				} csum_ip;
-			} hi_dword;
-		} lower;
-		struct {
-			__le32 status_error;  /* ext status/error */
-			__le16 length;
-			__le16 vlan; /* VLAN tag */
-		} upper;
-	} wb;  /* writeback */
-};
-
-#define MAX_PS_BUFFERS 4
-
-/* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS	(MAX_PS_BUFFERS - 1)
-
-/* Receive Descriptor - Packet Split */
-union e1000_rx_desc_packet_split {
-	struct {
-		/* one buffer for protocol header(s), three data buffers */
-		__le64 buffer_addr[MAX_PS_BUFFERS];
-	} read;
-	struct {
-		struct {
-			__le32 mrq;  /* Multiple Rx Queues */
-			union {
-				__le32 rss; /* RSS Hash */
-				struct {
-					__le16 ip_id;    /* IP id */
-					__le16 csum;     /* Packet Checksum */
-				} csum_ip;
-			} hi_dword;
-		} lower;
-		struct {
-			__le32 status_error;  /* ext status/error */
-			__le16 length0;  /* length of buffer 0 */
-			__le16 vlan;  /* VLAN tag */
-		} middle;
-		struct {
-			__le16 header_status;
-			/* length of buffers 1-3 */
-			__le16 length[PS_PAGE_BUFFERS];
-		} upper;
-		__le64 reserved;
-	} wb; /* writeback */
-};
-
-/* Transmit Descriptor */
-struct e1000_tx_desc {
-	__le64 buffer_addr;   /* Address of the descriptor's data buffer */
-	union {
-		__le32 data;
-		struct {
-			__le16 length;  /* Data buffer length */
-			u8 cso;  /* Checksum offset */
-			u8 cmd;  /* Descriptor control */
-		} flags;
-	} lower;
-	union {
-		__le32 data;
-		struct {
-			u8 status; /* Descriptor status */
-			u8 css;  /* Checksum start */
-			__le16 special;
-		} fields;
-	} upper;
-};
-
-/* Offload Context Descriptor */
-struct e1000_context_desc {
-	union {
-		__le32 ip_config;
-		struct {
-			u8 ipcss;  /* IP checksum start */
-			u8 ipcso;  /* IP checksum offset */
-			__le16 ipcse;  /* IP checksum end */
-		} ip_fields;
-	} lower_setup;
-	union {
-		__le32 tcp_config;
-		struct {
-			u8 tucss;  /* TCP checksum start */
-			u8 tucso;  /* TCP checksum offset */
-			__le16 tucse;  /* TCP checksum end */
-		} tcp_fields;
-	} upper_setup;
-	__le32 cmd_and_length;
-	union {
-		__le32 data;
-		struct {
-			u8 status;  /* Descriptor status */
-			u8 hdr_len;  /* Header length */
-			__le16 mss;  /* Maximum segment size */
-		} fields;
-	} tcp_seg_setup;
-};
-
-/* Offload data descriptor */
-struct e1000_data_desc {
-	__le64 buffer_addr;  /* Address of the descriptor's buffer address */
-	union {
-		__le32 data;
-		struct {
-			__le16 length;  /* Data buffer length */
-			u8 typ_len_ext;
-			u8 cmd;
-		} flags;
-	} lower;
-	union {
-		__le32 data;
-		struct {
-			u8 status;  /* Descriptor status */
-			u8 popts;  /* Packet Options */
-			__le16 special;
-		} fields;
-	} upper;
-};
-
-/* Statistics counters collected by the MAC */
-struct e1000_hw_stats {
-	u64 crcerrs;
-	u64 algnerrc;
-	u64 symerrs;
-	u64 rxerrc;
-	u64 mpc;
-	u64 scc;
-	u64 ecol;
-	u64 mcc;
-	u64 latecol;
-	u64 colc;
-	u64 dc;
-	u64 tncrs;
-	u64 sec;
-	u64 cexterr;
-	u64 rlec;
-	u64 xonrxc;
-	u64 xontxc;
-	u64 xoffrxc;
-	u64 xofftxc;
-	u64 fcruc;
-	u64 prc64;
-	u64 prc127;
-	u64 prc255;
-	u64 prc511;
-	u64 prc1023;
-	u64 prc1522;
-	u64 gprc;
-	u64 bprc;
-	u64 mprc;
-	u64 gptc;
-	u64 gorc;
-	u64 gotc;
-	u64 rnbc;
-	u64 ruc;
-	u64 rfc;
-	u64 roc;
-	u64 rjc;
-	u64 mgprc;
-	u64 mgpdc;
-	u64 mgptc;
-	u64 tor;
-	u64 tot;
-	u64 tpr;
-	u64 tpt;
-	u64 ptc64;
-	u64 ptc127;
-	u64 ptc255;
-	u64 ptc511;
-	u64 ptc1023;
-	u64 ptc1522;
-	u64 mptc;
-	u64 bptc;
-	u64 tsctc;
-	u64 tsctfc;
-	u64 iac;
-	u64 icrxptc;
-	u64 icrxatc;
-	u64 ictxptc;
-	u64 ictxatc;
-	u64 ictxqec;
-	u64 ictxqmtc;
-	u64 icrxdmtc;
-	u64 icrxoc;
-	u64 cbtmpc;
-	u64 htdpmc;
-	u64 cbrdpc;
-	u64 cbrmpc;
-	u64 rpthc;
-	u64 hgptc;
-	u64 htcbdpc;
-	u64 hgorc;
-	u64 hgotc;
-	u64 lenerrs;
-	u64 scvpc;
-	u64 hrmpc;
-	u64 doosync;
-	u64 o2bgptc;
-	u64 o2bspc;
-	u64 b2ospc;
-	u64 b2ogprc;
-};
-
-
-struct e1000_phy_stats {
-	u32 idle_errors;
-	u32 receive_errors;
-};
-
-struct e1000_host_mng_dhcp_cookie {
-	u32 signature;
-	u8  status;
-	u8  reserved0;
-	u16 vlan_id;
-	u32 reserved1;
-	u16 reserved2;
-	u8  reserved3;
-	u8  checksum;
-};
-
-/* Host Interface "Rev 1" */
-struct e1000_host_command_header {
-	u8 command_id;
-	u8 command_length;
-	u8 command_options;
-	u8 checksum;
-};
-
-#define E1000_HI_MAX_DATA_LENGTH	252
-struct e1000_host_command_info {
-	struct e1000_host_command_header command_header;
-	u8 command_data[E1000_HI_MAX_DATA_LENGTH];
-};
-
-/* Host Interface "Rev 2" */
-struct e1000_host_mng_command_header {
-	u8  command_id;
-	u8  checksum;
-	u16 reserved1;
-	u16 reserved2;
-	u16 command_length;
-};
-
-#define E1000_HI_MAX_MNG_DATA_LENGTH	0x6F8
-struct e1000_host_mng_command_info {
-	struct e1000_host_mng_command_header command_header;
-	u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
-};
-
-#include "e1000_mac.h"
-#include "e1000_phy.h"
-#include "e1000_nvm.h"
-#include "e1000_manage.h"
-#include "e1000_mbx.h"
-
-/* Function pointers for the MAC. */
-struct e1000_mac_operations {
-	s32  (*init_params)(struct e1000_hw *);
-	s32  (*id_led_init)(struct e1000_hw *);
-	s32  (*blink_led)(struct e1000_hw *);
-	bool (*check_mng_mode)(struct e1000_hw *);
-	s32  (*check_for_link)(struct e1000_hw *);
-	s32  (*cleanup_led)(struct e1000_hw *);
-	void (*clear_hw_cntrs)(struct e1000_hw *);
-	void (*clear_vfta)(struct e1000_hw *);
-	s32  (*get_bus_info)(struct e1000_hw *);
-	void (*set_lan_id)(struct e1000_hw *);
-	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
-	s32  (*led_on)(struct e1000_hw *);
-	s32  (*led_off)(struct e1000_hw *);
-	void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
-	s32  (*reset_hw)(struct e1000_hw *);
-	s32  (*init_hw)(struct e1000_hw *);
-	void (*shutdown_serdes)(struct e1000_hw *);
-	void (*power_up_serdes)(struct e1000_hw *);
-	s32  (*setup_link)(struct e1000_hw *);
-	s32  (*setup_physical_interface)(struct e1000_hw *);
-	s32  (*setup_led)(struct e1000_hw *);
-	void (*write_vfta)(struct e1000_hw *, u32, u32);
-	void (*config_collision_dist)(struct e1000_hw *);
-	void (*rar_set)(struct e1000_hw *, u8*, u32);
-	s32  (*read_mac_addr)(struct e1000_hw *);
-	s32  (*validate_mdi_setting)(struct e1000_hw *);
-	s32 (*get_thermal_sensor_data)(struct e1000_hw *);
-	s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
-	s32  (*acquire_swfw_sync)(struct e1000_hw *, u16);
-	void (*release_swfw_sync)(struct e1000_hw *, u16);
-};
-
-/* When to use various PHY register access functions:
- *
- *                 Func   Caller
- *   Function      Does   Does    When to use
- *   ~~~~~~~~~~~~  ~~~~~  ~~~~~~  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *   X_reg         L,P,A  n/a     for simple PHY reg accesses
- *   X_reg_locked  P,A    L       for multiple accesses of different regs
- *                                on different pages
- *   X_reg_page    A      L,P     for multiple accesses of different regs
- *                                on the same page
- *
- * Where X=[read|write], L=locking, P=sets page, A=register access
- *
- */
-struct e1000_phy_operations {
-	s32  (*init_params)(struct e1000_hw *);
-	s32  (*acquire)(struct e1000_hw *);
-	s32  (*check_polarity)(struct e1000_hw *);
-	s32  (*check_reset_block)(struct e1000_hw *);
-	s32  (*commit)(struct e1000_hw *);
-	s32  (*force_speed_duplex)(struct e1000_hw *);
-	s32  (*get_cfg_done)(struct e1000_hw *hw);
-	s32  (*get_cable_length)(struct e1000_hw *);
-	s32  (*get_info)(struct e1000_hw *);
-	s32  (*set_page)(struct e1000_hw *, u16);
-	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
-	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
-	s32  (*read_reg_page)(struct e1000_hw *, u32, u16 *);
-	void (*release)(struct e1000_hw *);
-	s32  (*reset)(struct e1000_hw *);
-	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
-	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
-	s32  (*write_reg)(struct e1000_hw *, u32, u16);
-	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
-	s32  (*write_reg_page)(struct e1000_hw *, u32, u16);
-	void (*power_up)(struct e1000_hw *);
-	void (*power_down)(struct e1000_hw *);
-	s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
-	s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
-};
-
-/* Function pointers for the NVM. */
-struct e1000_nvm_operations {
-	s32  (*init_params)(struct e1000_hw *);
-	s32  (*acquire)(struct e1000_hw *);
-	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
-	void (*release)(struct e1000_hw *);
-	void (*reload)(struct e1000_hw *);
-	s32  (*update)(struct e1000_hw *);
-	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
-	s32  (*validate)(struct e1000_hw *);
-	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
-};
-
-#define E1000_MAX_SENSORS		3
-
-struct e1000_thermal_diode_data {
-	u8 location;
-	u8 temp;
-	u8 caution_thresh;
-	u8 max_op_thresh;
-};
-
-struct e1000_thermal_sensor_data {
-	struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
-};
-
-struct e1000_mac_info {
-	struct e1000_mac_operations ops;
-	u8 addr[ETH_ADDR_LEN];
-	u8 perm_addr[ETH_ADDR_LEN];
-
-	enum e1000_mac_type type;
-
-	u32 collision_delta;
-	u32 ledctl_default;
-	u32 ledctl_mode1;
-	u32 ledctl_mode2;
-	u32 mc_filter_type;
-	u32 tx_packet_delta;
-	u32 txcw;
-
-	u16 current_ifs_val;
-	u16 ifs_max_val;
-	u16 ifs_min_val;
-	u16 ifs_ratio;
-	u16 ifs_step_size;
-	u16 mta_reg_count;
-	u16 uta_reg_count;
-
-	/* Maximum size of the MTA register table in all supported adapters */
-	#define MAX_MTA_REG 128
-	u32 mta_shadow[MAX_MTA_REG];
-	u16 rar_entry_count;
-
-	u8  forced_speed_duplex;
-
-	bool adaptive_ifs;
-	bool has_fwsm;
-	bool arc_subsystem_valid;
-	bool asf_firmware_present;
-	bool autoneg;
-	bool autoneg_failed;
-	bool get_link_status;
-	bool in_ifs_mode;
-	enum e1000_serdes_link_state serdes_link_state;
-	bool serdes_has_link;
-	bool tx_pkt_filtering;
-	struct e1000_thermal_sensor_data thermal_sensor_data;
-};
-
-struct e1000_phy_info {
-	struct e1000_phy_operations ops;
-	enum e1000_phy_type type;
-
-	enum e1000_1000t_rx_status local_rx;
-	enum e1000_1000t_rx_status remote_rx;
-	enum e1000_ms_type ms_type;
-	enum e1000_ms_type original_ms_type;
-	enum e1000_rev_polarity cable_polarity;
-	enum e1000_smart_speed smart_speed;
-
-	u32 addr;
-	u32 id;
-	u32 reset_delay_us; /* in usec */
-	u32 revision;
-
-	enum e1000_media_type media_type;
-
-	u16 autoneg_advertised;
-	u16 autoneg_mask;
-	u16 cable_length;
-	u16 max_cable_length;
-	u16 min_cable_length;
-
-	u8 mdix;
-
-	bool disable_polarity_correction;
-	bool is_mdix;
-	bool polarity_correction;
-	bool reset_disable;
-	bool speed_downgraded;
-	bool autoneg_wait_to_complete;
-};
-
-struct e1000_nvm_info {
-	struct e1000_nvm_operations ops;
-	enum e1000_nvm_type type;
-	enum e1000_nvm_override override;
-
-	u32 flash_bank_size;
-	u32 flash_base_addr;
-
-	u16 word_size;
-	u16 delay_usec;
-	u16 address_bits;
-	u16 opcode_bits;
-	u16 page_size;
-};
-
-struct e1000_bus_info {
-	enum e1000_bus_type type;
-	enum e1000_bus_speed speed;
-	enum e1000_bus_width width;
-
-	u16 func;
-	u16 pci_cmd_word;
-};
-
-struct e1000_fc_info {
-	u32 high_water;  /* Flow control high-water mark */
-	u32 low_water;  /* Flow control low-water mark */
-	u16 pause_time;  /* Flow control pause timer */
-	u16 refresh_time;  /* Flow control refresh timer */
-	bool send_xon;  /* Flow control send XON */
-	bool strict_ieee;  /* Strict IEEE mode */
-	enum e1000_fc_mode current_mode;  /* FC mode in effect */
-	enum e1000_fc_mode requested_mode;  /* FC mode requested by caller */
-};
-
-struct e1000_mbx_operations {
-	s32 (*init_params)(struct e1000_hw *hw);
-	s32 (*read)(struct e1000_hw *, u32 *, u16,  u16);
-	s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
-	s32 (*read_posted)(struct e1000_hw *, u32 *, u16,  u16);
-	s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
-	s32 (*check_for_msg)(struct e1000_hw *, u16);
-	s32 (*check_for_ack)(struct e1000_hw *, u16);
-	s32 (*check_for_rst)(struct e1000_hw *, u16);
-};
-
-struct e1000_mbx_stats {
-	u32 msgs_tx;
-	u32 msgs_rx;
-
-	u32 acks;
-	u32 reqs;
-	u32 rsts;
-};
-
-struct e1000_mbx_info {
-	struct e1000_mbx_operations ops;
-	struct e1000_mbx_stats stats;
-	u32 timeout;
-	u32 usec_delay;
-	u16 size;
-};
-
-struct e1000_dev_spec_82575 {
-	bool sgmii_active;
-	bool global_device_reset;
-	bool eee_disable;
-	bool module_plugged;
-	bool clear_semaphore_once;
-	u32 mtu;
-	struct sfp_e1000_flags eth_flags;
-	u8 media_port;
-	bool media_changed;
-};
-
-struct e1000_dev_spec_vf {
-	u32 vf_number;
-	u32 v2p_mailbox;
-};
-
-struct e1000_hw {
-	void *back;
-
-	u8 __iomem *hw_addr;
-	u8 __iomem *flash_address;
-	unsigned long io_base;
-
-	struct e1000_mac_info  mac;
-	struct e1000_fc_info   fc;
-	struct e1000_phy_info  phy;
-	struct e1000_nvm_info  nvm;
-	struct e1000_bus_info  bus;
-	struct e1000_mbx_info mbx;
-	struct e1000_host_mng_dhcp_cookie mng_cookie;
-
-	union {
-		struct e1000_dev_spec_82575 _82575;
-		struct e1000_dev_spec_vf vf;
-	} dev_spec;
-
-	u16 device_id;
-	u16 subsystem_vendor_id;
-	u16 subsystem_device_id;
-	u16 vendor_id;
-
-	u8  revision_id;
-};
-
-#include "e1000_82575.h"
-#include "e1000_i210.h"
-
-/* These functions must be implemented by drivers */
-s32  e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
-s32  e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
-
-#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.c b/kernel/linux/kni/ethtool/igb/e1000_i210.c
deleted file mode 100644
index a4fabc3aa..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_i210.c
+++ /dev/null
@@ -1,894 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_api.h"
-
-
-static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw);
-static void e1000_release_nvm_i210(struct e1000_hw *hw);
-static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw);
-static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
-				u16 *data);
-static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw);
-static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data);
-
-/**
- *  e1000_acquire_nvm_i210 - Request for access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Acquire the necessary semaphores for exclusive access to the EEPROM.
- *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
- *  Return successful if access grant bit set, else clear the request for
- *  EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_acquire_nvm_i210");
-
-	ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
-
-	return ret_val;
-}
-
-/**
- *  e1000_release_nvm_i210 - Release exclusive access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Stop any current commands to the EEPROM and clear the EEPROM request bit,
- *  then release the semaphores acquired.
- **/
-static void e1000_release_nvm_i210(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_release_nvm_i210");
-
-	e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM);
-}
-
-/**
- *  e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore
- *  @hw: pointer to the HW structure
- *  @mask: specifies which semaphore to acquire
- *
- *  Acquire the SW/FW semaphore to access the PHY or NVM.  The mask
- *  will also specify which port we're acquiring the lock for.
- **/
-s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
-{
-	u32 swfw_sync;
-	u32 swmask = mask;
-	u32 fwmask = mask << 16;
-	s32 ret_val = E1000_SUCCESS;
-	s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
-
-	DEBUGFUNC("e1000_acquire_swfw_sync_i210");
-
-	while (i < timeout) {
-		if (e1000_get_hw_semaphore_i210(hw)) {
-			ret_val = -E1000_ERR_SWFW_SYNC;
-			goto out;
-		}
-
-		swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
-		if (!(swfw_sync & (fwmask | swmask)))
-			break;
-
-		/*
-		 * Firmware currently using resource (fwmask)
-		 * or other software thread using resource (swmask)
-		 */
-		e1000_put_hw_semaphore_generic(hw);
-		msec_delay_irq(5);
-		i++;
-	}
-
-	if (i == timeout) {
-		DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
-		ret_val = -E1000_ERR_SWFW_SYNC;
-		goto out;
-	}
-
-	swfw_sync |= swmask;
-	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
-
-	e1000_put_hw_semaphore_generic(hw);
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_release_swfw_sync_i210 - Release SW/FW semaphore
- *  @hw: pointer to the HW structure
- *  @mask: specifies which semaphore to acquire
- *
- *  Release the SW/FW semaphore used to access the PHY or NVM.  The mask
- *  will also specify which port we're releasing the lock for.
- **/
-void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask)
-{
-	u32 swfw_sync;
-
-	DEBUGFUNC("e1000_release_swfw_sync_i210");
-
-	while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS)
-		; /* Empty */
-
-	swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC);
-	swfw_sync &= ~mask;
-	E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync);
-
-	e1000_put_hw_semaphore_generic(hw);
-}
-
-/**
- *  e1000_get_hw_semaphore_i210 - Acquire hardware semaphore
- *  @hw: pointer to the HW structure
- *
- *  Acquire the HW semaphore to access the PHY or NVM
- **/
-static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw)
-{
-	u32 swsm;
-	s32 timeout = hw->nvm.word_size + 1;
-	s32 i = 0;
-
-	DEBUGFUNC("e1000_get_hw_semaphore_i210");
-
-	/* Get the SW semaphore */
-	while (i < timeout) {
-		swsm = E1000_READ_REG(hw, E1000_SWSM);
-		if (!(swsm & E1000_SWSM_SMBI))
-			break;
-
-		usec_delay(50);
-		i++;
-	}
-
-	if (i == timeout) {
-		/* In rare circumstances, the SW semaphore may already be held
-		 * unintentionally. Clear the semaphore once before giving up.
-		 */
-		if (hw->dev_spec._82575.clear_semaphore_once) {
-			hw->dev_spec._82575.clear_semaphore_once = false;
-			e1000_put_hw_semaphore_generic(hw);
-			for (i = 0; i < timeout; i++) {
-				swsm = E1000_READ_REG(hw, E1000_SWSM);
-				if (!(swsm & E1000_SWSM_SMBI))
-					break;
-
-				usec_delay(50);
-			}
-		}
-
-		/* If we do not have the semaphore here, we have to give up. */
-		if (i == timeout) {
-			DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
-			return -E1000_ERR_NVM;
-		}
-	}
-
-	/* Get the FW semaphore. */
-	for (i = 0; i < timeout; i++) {
-		swsm = E1000_READ_REG(hw, E1000_SWSM);
-		E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
-
-		/* Semaphore acquired if bit latched */
-		if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
-			break;
-
-		usec_delay(50);
-	}
-
-	if (i == timeout) {
-		/* Release semaphores */
-		e1000_put_hw_semaphore_generic(hw);
-		DEBUGOUT("Driver can't access the NVM\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register
- *  @hw: pointer to the HW structure
- *  @offset: offset of word in the Shadow Ram to read
- *  @words: number of words to read
- *  @data: word read from the Shadow Ram
- *
- *  Reads a 16 bit word from the Shadow Ram using the EERD register.
- *  Uses necessary synchronization semaphores.
- **/
-s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words,
-			     u16 *data)
-{
-	s32 status = E1000_SUCCESS;
-	u16 i, count;
-
-	DEBUGFUNC("e1000_read_nvm_srrd_i210");
-
-	/* We cannot hold synchronization semaphores for too long,
-	 * because of forceful takeover procedure. However it is more efficient
-	 * to read in bursts than synchronizing access for each word. */
-	for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
-		count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
-			E1000_EERD_EEWR_MAX_COUNT : (words - i);
-		if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
-			status = e1000_read_nvm_eerd(hw, offset, count,
-						     data + i);
-			hw->nvm.ops.release(hw);
-		} else {
-			status = E1000_ERR_SWFW_SYNC;
-		}
-
-		if (status != E1000_SUCCESS)
-			break;
-	}
-
-	return status;
-}
-
-/**
- *  e1000_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR
- *  @hw: pointer to the HW structure
- *  @offset: offset within the Shadow RAM to be written to
- *  @words: number of words to write
- *  @data: 16 bit word(s) to be written to the Shadow RAM
- *
- *  Writes data to Shadow RAM at offset using EEWR register.
- *
- *  If e1000_update_nvm_checksum is not called after this function , the
- *  data will not be committed to FLASH and also Shadow RAM will most likely
- *  contain an invalid checksum.
- *
- *  If error code is returned, data and Shadow RAM may be inconsistent - buffer
- *  partially written.
- **/
-s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words,
-			      u16 *data)
-{
-	s32 status = E1000_SUCCESS;
-	u16 i, count;
-
-	DEBUGFUNC("e1000_write_nvm_srwr_i210");
-
-	/* We cannot hold synchronization semaphores for too long,
-	 * because of forceful takeover procedure. However it is more efficient
-	 * to write in bursts than synchronizing access for each word. */
-	for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) {
-		count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ?
-			E1000_EERD_EEWR_MAX_COUNT : (words - i);
-		if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
-			status = e1000_write_nvm_srwr(hw, offset, count,
-						      data + i);
-			hw->nvm.ops.release(hw);
-		} else {
-			status = E1000_ERR_SWFW_SYNC;
-		}
-
-		if (status != E1000_SUCCESS)
-			break;
-	}
-
-	return status;
-}
-
-/**
- *  e1000_write_nvm_srwr - Write to Shadow Ram using EEWR
- *  @hw: pointer to the HW structure
- *  @offset: offset within the Shadow Ram to be written to
- *  @words: number of words to write
- *  @data: 16 bit word(s) to be written to the Shadow Ram
- *
- *  Writes data to Shadow Ram at offset using EEWR register.
- *
- *  If e1000_update_nvm_checksum is not called after this function , the
- *  Shadow Ram will most likely contain an invalid checksum.
- **/
-static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words,
-				u16 *data)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i, k, eewr = 0;
-	u32 attempts = 100000;
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_write_nvm_srwr");
-
-	/*
-	 * A check for invalid values:  offset too large, too many words,
-	 * too many words for the offset, and not enough words.
-	 */
-	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-	    (words == 0)) {
-		DEBUGOUT("nvm parameter(s) out of bounds\n");
-		ret_val = -E1000_ERR_NVM;
-		goto out;
-	}
-
-	for (i = 0; i < words; i++) {
-		eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
-			(data[i] << E1000_NVM_RW_REG_DATA) |
-			E1000_NVM_RW_REG_START;
-
-		E1000_WRITE_REG(hw, E1000_SRWR, eewr);
-
-		for (k = 0; k < attempts; k++) {
-			if (E1000_NVM_RW_REG_DONE &
-			    E1000_READ_REG(hw, E1000_SRWR)) {
-				ret_val = E1000_SUCCESS;
-				break;
-			}
-			usec_delay(5);
-		}
-
-		if (ret_val != E1000_SUCCESS) {
-			DEBUGOUT("Shadow RAM write EEWR timed out\n");
-			break;
-		}
-	}
-
-out:
-	return ret_val;
-}
-
-/** e1000_read_invm_word_i210 - Reads OTP
- *  @hw: pointer to the HW structure
- *  @address: the word address (aka eeprom offset) to read
- *  @data: pointer to the data read
- *
- *  Reads 16-bit words from the OTP. Return error when the word is not
- *  stored in OTP.
- **/
-static s32 e1000_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data)
-{
-	s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
-	u32 invm_dword;
-	u16 i;
-	u8 record_type, word_address;
-
-	DEBUGFUNC("e1000_read_invm_word_i210");
-
-	for (i = 0; i < E1000_INVM_SIZE; i++) {
-		invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i));
-		/* Get record type */
-		record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword);
-		if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE)
-			break;
-		if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE)
-			i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS;
-		if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE)
-			i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS;
-		if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) {
-			word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword);
-			if (word_address == address) {
-				*data = INVM_DWORD_TO_WORD_DATA(invm_dword);
-				DEBUGOUT2("Read INVM Word 0x%02x = %x",
-					  address, *data);
-				status = E1000_SUCCESS;
-				break;
-			}
-		}
-	}
-	if (status != E1000_SUCCESS)
-		DEBUGOUT1("Requested word 0x%02x not found in OTP\n", address);
-	return status;
-}
-
-/** e1000_read_invm_i210 - Read invm wrapper function for I210/I211
- *  @hw: pointer to the HW structure
- *  @address: the word address (aka eeprom offset) to read
- *  @data: pointer to the data read
- *
- *  Wrapper function to return data formerly found in the NVM.
- **/
-static s32 e1000_read_invm_i210(struct e1000_hw *hw, u16 offset,
-				u16 E1000_UNUSEDARG words, u16 *data)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_read_invm_i210");
-
-	/* Only the MAC addr is required to be present in the iNVM */
-	switch (offset) {
-	case NVM_MAC_ADDR:
-		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]);
-		ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1,
-						     &data[1]);
-		ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2,
-						     &data[2]);
-		if (ret_val != E1000_SUCCESS)
-			DEBUGOUT("MAC Addr not found in iNVM\n");
-		break;
-	case NVM_INIT_CTRL_2:
-		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
-		if (ret_val != E1000_SUCCESS) {
-			*data = NVM_INIT_CTRL_2_DEFAULT_I211;
-			ret_val = E1000_SUCCESS;
-		}
-		break;
-	case NVM_INIT_CTRL_4:
-		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
-		if (ret_val != E1000_SUCCESS) {
-			*data = NVM_INIT_CTRL_4_DEFAULT_I211;
-			ret_val = E1000_SUCCESS;
-		}
-		break;
-	case NVM_LED_1_CFG:
-		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
-		if (ret_val != E1000_SUCCESS) {
-			*data = NVM_LED_1_CFG_DEFAULT_I211;
-			ret_val = E1000_SUCCESS;
-		}
-		break;
-	case NVM_LED_0_2_CFG:
-		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
-		if (ret_val != E1000_SUCCESS) {
-			*data = NVM_LED_0_2_CFG_DEFAULT_I211;
-			ret_val = E1000_SUCCESS;
-		}
-		break;
-	case NVM_ID_LED_SETTINGS:
-		ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data);
-		if (ret_val != E1000_SUCCESS) {
-			*data = ID_LED_RESERVED_FFFF;
-			ret_val = E1000_SUCCESS;
-		}
-		break;
-	case NVM_SUB_DEV_ID:
-		*data = hw->subsystem_device_id;
-		break;
-	case NVM_SUB_VEN_ID:
-		*data = hw->subsystem_vendor_id;
-		break;
-	case NVM_DEV_ID:
-		*data = hw->device_id;
-		break;
-	case NVM_VEN_ID:
-		*data = hw->vendor_id;
-		break;
-	default:
-		DEBUGOUT1("NVM word 0x%02x is not mapped.\n", offset);
-		*data = NVM_RESERVED_WORD;
-		break;
-	}
-	return ret_val;
-}
-
-/**
- *  e1000_read_invm_version - Reads iNVM version and image type
- *  @hw: pointer to the HW structure
- *  @invm_ver: version structure for the version read
- *
- *  Reads iNVM version and image type.
- **/
-s32 e1000_read_invm_version(struct e1000_hw *hw,
-			    struct e1000_fw_version *invm_ver)
-{
-	u32 *record = NULL;
-	u32 *next_record = NULL;
-	u32 i = 0;
-	u32 invm_dword = 0;
-	u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE /
-					     E1000_INVM_RECORD_SIZE_IN_BYTES);
-	u32 buffer[E1000_INVM_SIZE];
-	s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND;
-	u16 version = 0;
-
-	DEBUGFUNC("e1000_read_invm_version");
-
-	/* Read iNVM memory */
-	for (i = 0; i < E1000_INVM_SIZE; i++) {
-		invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i));
-		buffer[i] = invm_dword;
-	}
-
-	/* Read version number */
-	for (i = 1; i < invm_blocks; i++) {
-		record = &buffer[invm_blocks - i];
-		next_record = &buffer[invm_blocks - i + 1];
-
-		/* Check if we have first version location used */
-		if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) {
-			version = 0;
-			status = E1000_SUCCESS;
-			break;
-		}
-		/* Check if we have second version location used */
-		else if ((i == 1) &&
-			 ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) {
-			version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
-			status = E1000_SUCCESS;
-			break;
-		}
-		/*
-		 * Check if we have odd version location
-		 * used and it is the last one used
-		 */
-		else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) &&
-			 ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) &&
-			 (i != 1))) {
-			version = (*next_record & E1000_INVM_VER_FIELD_TWO)
-				  >> 13;
-			status = E1000_SUCCESS;
-			break;
-		}
-		/*
-		 * Check if we have even version location
-		 * used and it is the last one used
-		 */
-		else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) &&
-			 ((*record & 0x3) == 0)) {
-			version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3;
-			status = E1000_SUCCESS;
-			break;
-		}
-	}
-
-	if (status == E1000_SUCCESS) {
-		invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK)
-					>> E1000_INVM_MAJOR_SHIFT;
-		invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK;
-	}
-	/* Read Image Type */
-	for (i = 1; i < invm_blocks; i++) {
-		record = &buffer[invm_blocks - i];
-		next_record = &buffer[invm_blocks - i + 1];
-
-		/* Check if we have image type in first location used */
-		if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) {
-			invm_ver->invm_img_type = 0;
-			status = E1000_SUCCESS;
-			break;
-		}
-		/* Check if we have image type in first location used */
-		else if ((((*record & 0x3) == 0) &&
-			 ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) ||
-			 ((((*record & 0x3) != 0) && (i != 1)))) {
-			invm_ver->invm_img_type =
-				(*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23;
-			status = E1000_SUCCESS;
-			break;
-		}
-	}
-	return status;
-}
-
-/**
- *  e1000_validate_nvm_checksum_i210 - Validate EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw)
-{
-	s32 status = E1000_SUCCESS;
-	s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *);
-
-	DEBUGFUNC("e1000_validate_nvm_checksum_i210");
-
-	if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
-
-		/*
-		 * Replace the read function with semaphore grabbing with
-		 * the one that skips this for a while.
-		 * We have semaphore taken already here.
-		 */
-		read_op_ptr = hw->nvm.ops.read;
-		hw->nvm.ops.read = e1000_read_nvm_eerd;
-
-		status = e1000_validate_nvm_checksum_generic(hw);
-
-		/* Revert original read operation. */
-		hw->nvm.ops.read = read_op_ptr;
-
-		hw->nvm.ops.release(hw);
-	} else {
-		status = E1000_ERR_SWFW_SYNC;
-	}
-
-	return status;
-}
-
-
-/**
- *  e1000_update_nvm_checksum_i210 - Update EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
- *  up to the checksum.  Then calculates the EEPROM checksum and writes the
- *  value to the EEPROM. Next commit EEPROM data onto the Flash.
- **/
-s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	DEBUGFUNC("e1000_update_nvm_checksum_i210");
-
-	/*
-	 * Read the first word from the EEPROM. If this times out or fails, do
-	 * not continue or we could be in for a very long wait while every
-	 * EEPROM read fails
-	 */
-	ret_val = e1000_read_nvm_eerd(hw, 0, 1, &nvm_data);
-	if (ret_val != E1000_SUCCESS) {
-		DEBUGOUT("EEPROM read failed\n");
-		goto out;
-	}
-
-	if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) {
-		/*
-		 * Do not use hw->nvm.ops.write, hw->nvm.ops.read
-		 * because we do not want to take the synchronization
-		 * semaphores twice here.
-		 */
-
-		for (i = 0; i < NVM_CHECKSUM_REG; i++) {
-			ret_val = e1000_read_nvm_eerd(hw, i, 1, &nvm_data);
-			if (ret_val) {
-				hw->nvm.ops.release(hw);
-				DEBUGOUT("NVM Read Error while updating checksum.\n");
-				goto out;
-			}
-			checksum += nvm_data;
-		}
-		checksum = (u16) NVM_SUM - checksum;
-		ret_val = e1000_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
-						&checksum);
-		if (ret_val != E1000_SUCCESS) {
-			hw->nvm.ops.release(hw);
-			DEBUGOUT("NVM Write Error while updating checksum.\n");
-			goto out;
-		}
-
-		hw->nvm.ops.release(hw);
-
-		ret_val = e1000_update_flash_i210(hw);
-	} else {
-		ret_val = E1000_ERR_SWFW_SYNC;
-	}
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_get_flash_presence_i210 - Check if flash device is detected.
- *  @hw: pointer to the HW structure
- *
- **/
-bool e1000_get_flash_presence_i210(struct e1000_hw *hw)
-{
-	u32 eec = 0;
-	bool ret_val = false;
-
-	DEBUGFUNC("e1000_get_flash_presence_i210");
-
-	eec = E1000_READ_REG(hw, E1000_EECD);
-
-	if (eec & E1000_EECD_FLASH_DETECTED_I210)
-		ret_val = true;
-
-	return ret_val;
-}
-
-/**
- *  e1000_update_flash_i210 - Commit EEPROM to the flash
- *  @hw: pointer to the HW structure
- *
- **/
-s32 e1000_update_flash_i210(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	u32 flup;
-
-	DEBUGFUNC("e1000_update_flash_i210");
-
-	ret_val = e1000_pool_flash_update_done_i210(hw);
-	if (ret_val == -E1000_ERR_NVM) {
-		DEBUGOUT("Flash update time out\n");
-		goto out;
-	}
-
-	flup = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD_I210;
-	E1000_WRITE_REG(hw, E1000_EECD, flup);
-
-	ret_val = e1000_pool_flash_update_done_i210(hw);
-	if (ret_val == E1000_SUCCESS)
-		DEBUGOUT("Flash update complete\n");
-	else
-		DEBUGOUT("Flash update time out\n");
-
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_pool_flash_update_done_i210 - Pool FLUDONE status.
- *  @hw: pointer to the HW structure
- *
- **/
-s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw)
-{
-	s32 ret_val = -E1000_ERR_NVM;
-	u32 i, reg;
-
-	DEBUGFUNC("e1000_pool_flash_update_done_i210");
-
-	for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) {
-		reg = E1000_READ_REG(hw, E1000_EECD);
-		if (reg & E1000_EECD_FLUDONE_I210) {
-			ret_val = E1000_SUCCESS;
-			break;
-		}
-		usec_delay(5);
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_init_nvm_params_i210 - Initialize i210 NVM function pointers
- *  @hw: pointer to the HW structure
- *
- *  Initialize the i210/i211 NVM parameters and function pointers.
- **/
-static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw)
-{
-	s32 ret_val = E1000_SUCCESS;
-	struct e1000_nvm_info *nvm = &hw->nvm;
-
-	DEBUGFUNC("e1000_init_nvm_params_i210");
-
-	ret_val = e1000_init_nvm_params_82575(hw);
-	nvm->ops.acquire = e1000_acquire_nvm_i210;
-	nvm->ops.release = e1000_release_nvm_i210;
-	nvm->ops.valid_led_default = e1000_valid_led_default_i210;
-	if (e1000_get_flash_presence_i210(hw)) {
-		hw->nvm.type = e1000_nvm_flash_hw;
-		nvm->ops.read    = e1000_read_nvm_srrd_i210;
-		nvm->ops.write   = e1000_write_nvm_srwr_i210;
-		nvm->ops.validate = e1000_validate_nvm_checksum_i210;
-		nvm->ops.update   = e1000_update_nvm_checksum_i210;
-	} else {
-		hw->nvm.type = e1000_nvm_invm;
-		nvm->ops.read     = e1000_read_invm_i210;
-		nvm->ops.write    = e1000_null_write_nvm;
-		nvm->ops.validate = e1000_null_ops_generic;
-		nvm->ops.update   = e1000_null_ops_generic;
-	}
-	return ret_val;
-}
-
-/**
- *  e1000_init_function_pointers_i210 - Init func ptrs.
- *  @hw: pointer to the HW structure
- *
- *  Called to initialize all function pointers and parameters.
- **/
-void e1000_init_function_pointers_i210(struct e1000_hw *hw)
-{
-	e1000_init_function_pointers_82575(hw);
-	hw->nvm.ops.init_params = e1000_init_nvm_params_i210;
-
-	return;
-}
-
-/**
- *  e1000_valid_led_default_i210 - Verify a valid default LED config
- *  @hw: pointer to the HW structure
- *  @data: pointer to the NVM (EEPROM)
- *
- *  Read the EEPROM for the current default LED configuration.  If the
- *  LED configuration is not valid, set to a valid LED configuration.
- **/
-static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_valid_led_default_i210");
-
-	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		goto out;
-	}
-
-	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
-		switch (hw->phy.media_type) {
-		case e1000_media_type_internal_serdes:
-			*data = ID_LED_DEFAULT_I210_SERDES;
-			break;
-		case e1000_media_type_copper:
-		default:
-			*data = ID_LED_DEFAULT_I210;
-			break;
-		}
-	}
-out:
-	return ret_val;
-}
-
-/**
- *  __e1000_access_xmdio_reg - Read/write XMDIO register
- *  @hw: pointer to the HW structure
- *  @address: XMDIO address to program
- *  @dev_addr: device address to program
- *  @data: pointer to value to read/write from/to the XMDIO address
- *  @read: boolean flag to indicate read or write
- **/
-static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address,
-				    u8 dev_addr, u16 *data, bool read)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("__e1000_access_xmdio_reg");
-
-	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA |
-							 dev_addr);
-	if (ret_val)
-		return ret_val;
-
-	if (read)
-		ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data);
-	else
-		ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data);
-	if (ret_val)
-		return ret_val;
-
-	/* Recalibrate the device back to 0 */
-	ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0);
-	if (ret_val)
-		return ret_val;
-
-	return ret_val;
-}
-
-/**
- *  e1000_read_xmdio_reg - Read XMDIO register
- *  @hw: pointer to the HW structure
- *  @addr: XMDIO address to program
- *  @dev_addr: device address to program
- *  @data: value to be read from the EMI address
- **/
-s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data)
-{
-	DEBUGFUNC("e1000_read_xmdio_reg");
-
-	return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, true);
-}
-
-/**
- *  e1000_write_xmdio_reg - Write XMDIO register
- *  @hw: pointer to the HW structure
- *  @addr: XMDIO address to program
- *  @dev_addr: device address to program
- *  @data: value to be written to the XMDIO address
- **/
-s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data)
-{
-	DEBUGFUNC("e1000_read_xmdio_reg");
-
-	return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, false);
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.h b/kernel/linux/kni/ethtool/igb/e1000_i210.h
deleted file mode 100644
index 9df7c203c..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_i210.h
+++ /dev/null
@@ -1,76 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_I210_H_
-#define _E1000_I210_H_
-
-bool e1000_get_flash_presence_i210(struct e1000_hw *hw);
-s32 e1000_update_flash_i210(struct e1000_hw *hw);
-s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw);
-s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw);
-s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset,
-			      u16 words, u16 *data);
-s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset,
-			     u16 words, u16 *data);
-s32 e1000_read_invm_version(struct e1000_hw *hw,
-			    struct e1000_fw_version *invm_ver);
-s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
-void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask);
-s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,
-			 u16 *data);
-s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr,
-			  u16 data);
-
-#define E1000_STM_OPCODE		0xDB00
-#define E1000_EEPROM_FLASH_SIZE_WORD	0x11
-
-#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \
-	(u8)((invm_dword) & 0x7)
-#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \
-	(u8)(((invm_dword) & 0x0000FE00) >> 9)
-#define INVM_DWORD_TO_WORD_DATA(invm_dword) \
-	(u16)(((invm_dword) & 0xFFFF0000) >> 16)
-
-enum E1000_INVM_STRUCTURE_TYPE {
-	E1000_INVM_UNINITIALIZED_STRUCTURE		= 0x00,
-	E1000_INVM_WORD_AUTOLOAD_STRUCTURE		= 0x01,
-	E1000_INVM_CSR_AUTOLOAD_STRUCTURE		= 0x02,
-	E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE	= 0x03,
-	E1000_INVM_RSA_KEY_SHA256_STRUCTURE		= 0x04,
-	E1000_INVM_INVALIDATED_STRUCTURE		= 0x0F,
-};
-
-#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS	8
-#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS	1
-#define E1000_INVM_ULT_BYTES_SIZE	8
-#define E1000_INVM_RECORD_SIZE_IN_BYTES	4
-#define E1000_INVM_VER_FIELD_ONE	0x1FF8
-#define E1000_INVM_VER_FIELD_TWO	0x7FE000
-#define E1000_INVM_IMGTYPE_FIELD	0x1F800000
-
-#define E1000_INVM_MAJOR_MASK	0x3F0
-#define E1000_INVM_MINOR_MASK	0xF
-#define E1000_INVM_MAJOR_SHIFT	4
-
-#define ID_LED_DEFAULT_I210		((ID_LED_OFF1_ON2  << 8) | \
-					 (ID_LED_DEF1_DEF2 <<  4) | \
-					 (ID_LED_OFF1_OFF2))
-#define ID_LED_DEFAULT_I210_SERDES	((ID_LED_DEF1_DEF2 << 8) | \
-					 (ID_LED_DEF1_DEF2 <<  4) | \
-					 (ID_LED_OFF1_ON2))
-
-/* NVM offset defaults for I211 devices */
-#define NVM_INIT_CTRL_2_DEFAULT_I211	0X7243
-#define NVM_INIT_CTRL_4_DEFAULT_I211	0x00C1
-#define NVM_LED_1_CFG_DEFAULT_I211	0x0184
-#define NVM_LED_0_2_CFG_DEFAULT_I211	0x200C
-#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.c b/kernel/linux/kni/ethtool/igb/e1000_mac.c
deleted file mode 100644
index 13a42267c..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_mac.c
+++ /dev/null
@@ -1,2081 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_api.h"
-
-static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw);
-static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
-static void e1000_config_collision_dist_generic(struct e1000_hw *hw);
-static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index);
-
-/**
- *  e1000_init_mac_ops_generic - Initialize MAC function pointers
- *  @hw: pointer to the HW structure
- *
- *  Setups up the function pointers to no-op functions
- **/
-void e1000_init_mac_ops_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	DEBUGFUNC("e1000_init_mac_ops_generic");
-
-	/* General Setup */
-	mac->ops.init_params = e1000_null_ops_generic;
-	mac->ops.init_hw = e1000_null_ops_generic;
-	mac->ops.reset_hw = e1000_null_ops_generic;
-	mac->ops.setup_physical_interface = e1000_null_ops_generic;
-	mac->ops.get_bus_info = e1000_null_ops_generic;
-	mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie;
-	mac->ops.read_mac_addr = e1000_read_mac_addr_generic;
-	mac->ops.config_collision_dist = e1000_config_collision_dist_generic;
-	mac->ops.clear_hw_cntrs = e1000_null_mac_generic;
-	/* LED */
-	mac->ops.cleanup_led = e1000_null_ops_generic;
-	mac->ops.setup_led = e1000_null_ops_generic;
-	mac->ops.blink_led = e1000_null_ops_generic;
-	mac->ops.led_on = e1000_null_ops_generic;
-	mac->ops.led_off = e1000_null_ops_generic;
-	/* LINK */
-	mac->ops.setup_link = e1000_null_ops_generic;
-	mac->ops.get_link_up_info = e1000_null_link_info;
-	mac->ops.check_for_link = e1000_null_ops_generic;
-	/* Management */
-	mac->ops.check_mng_mode = e1000_null_mng_mode;
-	/* VLAN, MC, etc. */
-	mac->ops.update_mc_addr_list = e1000_null_update_mc;
-	mac->ops.clear_vfta = e1000_null_mac_generic;
-	mac->ops.write_vfta = e1000_null_write_vfta;
-	mac->ops.rar_set = e1000_rar_set_generic;
-	mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic;
-}
-
-/**
- *  e1000_null_ops_generic - No-op function, returns 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_ops_generic(struct e1000_hw E1000_UNUSEDARG *hw)
-{
-	DEBUGFUNC("e1000_null_ops_generic");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_mac_generic - No-op function, return void
- *  @hw: pointer to the HW structure
- **/
-void e1000_null_mac_generic(struct e1000_hw E1000_UNUSEDARG *hw)
-{
-	DEBUGFUNC("e1000_null_mac_generic");
-	return;
-}
-
-/**
- *  e1000_null_link_info - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_link_info(struct e1000_hw E1000_UNUSEDARG *hw,
-			 u16 E1000_UNUSEDARG *s, u16 E1000_UNUSEDARG *d)
-{
-	DEBUGFUNC("e1000_null_link_info");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_mng_mode - No-op function, return false
- *  @hw: pointer to the HW structure
- **/
-bool e1000_null_mng_mode(struct e1000_hw E1000_UNUSEDARG *hw)
-{
-	DEBUGFUNC("e1000_null_mng_mode");
-	return false;
-}
-
-/**
- *  e1000_null_update_mc - No-op function, return void
- *  @hw: pointer to the HW structure
- **/
-void e1000_null_update_mc(struct e1000_hw E1000_UNUSEDARG *hw,
-			  u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a)
-{
-	DEBUGFUNC("e1000_null_update_mc");
-	return;
-}
-
-/**
- *  e1000_null_write_vfta - No-op function, return void
- *  @hw: pointer to the HW structure
- **/
-void e1000_null_write_vfta(struct e1000_hw E1000_UNUSEDARG *hw,
-			   u32 E1000_UNUSEDARG a, u32 E1000_UNUSEDARG b)
-{
-	DEBUGFUNC("e1000_null_write_vfta");
-	return;
-}
-
-/**
- *  e1000_null_rar_set - No-op function, return void
- *  @hw: pointer to the HW structure
- **/
-void e1000_null_rar_set(struct e1000_hw E1000_UNUSEDARG *hw,
-			u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a)
-{
-	DEBUGFUNC("e1000_null_rar_set");
-	return;
-}
-
-/**
- *  e1000_get_bus_info_pcie_generic - Get PCIe bus information
- *  @hw: pointer to the HW structure
- *
- *  Determines and stores the system bus information for a particular
- *  network interface.  The following bus information is determined and stored:
- *  bus speed, bus width, type (PCIe), and PCIe function.
- **/
-s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	struct e1000_bus_info *bus = &hw->bus;
-	s32 ret_val;
-	u16 pcie_link_status;
-
-	DEBUGFUNC("e1000_get_bus_info_pcie_generic");
-
-	bus->type = e1000_bus_type_pci_express;
-
-	ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS,
-					  &pcie_link_status);
-	if (ret_val) {
-		bus->width = e1000_bus_width_unknown;
-		bus->speed = e1000_bus_speed_unknown;
-	} else {
-		switch (pcie_link_status & PCIE_LINK_SPEED_MASK) {
-		case PCIE_LINK_SPEED_2500:
-			bus->speed = e1000_bus_speed_2500;
-			break;
-		case PCIE_LINK_SPEED_5000:
-			bus->speed = e1000_bus_speed_5000;
-			break;
-		default:
-			bus->speed = e1000_bus_speed_unknown;
-			break;
-		}
-
-		bus->width = (enum e1000_bus_width)((pcie_link_status &
-			      PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT);
-	}
-
-	mac->ops.set_lan_id(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
- *
- *  @hw: pointer to the HW structure
- *
- *  Determines the LAN function id by reading memory-mapped registers
- *  and swaps the port value if requested.
- **/
-static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
-{
-	struct e1000_bus_info *bus = &hw->bus;
-	u32 reg;
-
-	/* The status register reports the correct function number
-	 * for the device regardless of function swap state.
-	 */
-	reg = E1000_READ_REG(hw, E1000_STATUS);
-	bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
-}
-
-/**
- *  e1000_set_lan_id_single_port - Set LAN id for a single port device
- *  @hw: pointer to the HW structure
- *
- *  Sets the LAN function id to zero for a single port device.
- **/
-void e1000_set_lan_id_single_port(struct e1000_hw *hw)
-{
-	struct e1000_bus_info *bus = &hw->bus;
-
-	bus->func = 0;
-}
-
-/**
- *  e1000_clear_vfta_generic - Clear VLAN filter table
- *  @hw: pointer to the HW structure
- *
- *  Clears the register array which contains the VLAN filter table by
- *  setting all the values to 0.
- **/
-void e1000_clear_vfta_generic(struct e1000_hw *hw)
-{
-	u32 offset;
-
-	DEBUGFUNC("e1000_clear_vfta_generic");
-
-	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
-		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
-		E1000_WRITE_FLUSH(hw);
-	}
-}
-
-/**
- *  e1000_write_vfta_generic - Write value to VLAN filter table
- *  @hw: pointer to the HW structure
- *  @offset: register offset in VLAN filter table
- *  @value: register value written to VLAN filter table
- *
- *  Writes value at the given offset in the register array which stores
- *  the VLAN filter table.
- **/
-void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
-{
-	DEBUGFUNC("e1000_write_vfta_generic");
-
-	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/**
- *  e1000_init_rx_addrs_generic - Initialize receive address's
- *  @hw: pointer to the HW structure
- *  @rar_count: receive address registers
- *
- *  Setup the receive address registers by setting the base receive address
- *  register to the devices MAC address and clearing all the other receive
- *  address registers to 0.
- **/
-void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count)
-{
-	u32 i;
-	u8 mac_addr[ETH_ADDR_LEN] = {0};
-
-	DEBUGFUNC("e1000_init_rx_addrs_generic");
-
-	/* Setup the receive address */
-	DEBUGOUT("Programming MAC Address into RAR[0]\n");
-
-	hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
-	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1);
-	for (i = 1; i < rar_count; i++)
-		hw->mac.ops.rar_set(hw, mac_addr, i);
-}
-
-/**
- *  e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
- *  @hw: pointer to the HW structure
- *
- *  Checks the nvm for an alternate MAC address.  An alternate MAC address
- *  can be setup by pre-boot software and must be treated like a permanent
- *  address and must override the actual permanent MAC address. If an
- *  alternate MAC address is found it is programmed into RAR0, replacing
- *  the permanent address that was installed into RAR0 by the Si on reset.
- *  This function will return SUCCESS unless it encounters an error while
- *  reading the EEPROM.
- **/
-s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
-{
-	u32 i;
-	s32 ret_val;
-	u16 offset, nvm_alt_mac_addr_offset, nvm_data;
-	u8 alt_mac_addr[ETH_ADDR_LEN];
-
-	DEBUGFUNC("e1000_check_alt_mac_addr_generic");
-
-	ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data);
-	if (ret_val)
-		return ret_val;
-
-
-	/* Alternate MAC address is handled by the option ROM for 82580
-	 * and newer. SW support not required.
-	 */
-	if (hw->mac.type >= e1000_82580)
-		return E1000_SUCCESS;
-
-	ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
-				   &nvm_alt_mac_addr_offset);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if ((nvm_alt_mac_addr_offset == 0xFFFF) ||
-	    (nvm_alt_mac_addr_offset == 0x0000))
-		/* There is no Alternate MAC Address */
-		return E1000_SUCCESS;
-
-	if (hw->bus.func == E1000_FUNC_1)
-		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
-	if (hw->bus.func == E1000_FUNC_2)
-		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2;
-
-	if (hw->bus.func == E1000_FUNC_3)
-		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3;
-	for (i = 0; i < ETH_ADDR_LEN; i += 2) {
-		offset = nvm_alt_mac_addr_offset + (i >> 1);
-		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Read Error\n");
-			return ret_val;
-		}
-
-		alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
-		alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
-	}
-
-	/* if multicast bit is set, the alternate address will not be used */
-	if (alt_mac_addr[0] & 0x01) {
-		DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n");
-		return E1000_SUCCESS;
-	}
-
-	/* We have a valid alternate MAC address, and we want to treat it the
-	 * same as the normal permanent MAC address stored by the HW into the
-	 * RAR. Do this by mapping this address into RAR0.
-	 */
-	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_rar_set_generic - Set receive address register
- *  @hw: pointer to the HW structure
- *  @addr: pointer to the receive address
- *  @index: receive address array register
- *
- *  Sets the receive address array register at index to the address passed
- *  in by addr.
- **/
-static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index)
-{
-	u32 rar_low, rar_high;
-
-	DEBUGFUNC("e1000_rar_set_generic");
-
-	/* HW expects these in little endian so we reverse the byte order
-	 * from network order (big endian) to little endian
-	 */
-	rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
-		   ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
-
-	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
-
-	/* If MAC address zero, no need to set the AV bit */
-	if (rar_low || rar_high)
-		rar_high |= E1000_RAH_AV;
-
-	/* Some bridges will combine consecutive 32-bit writes into
-	 * a single burst write, which will malfunction on some parts.
-	 * The flushes avoid this.
-	 */
-	E1000_WRITE_REG(hw, E1000_RAL(index), rar_low);
-	E1000_WRITE_FLUSH(hw);
-	E1000_WRITE_REG(hw, E1000_RAH(index), rar_high);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/**
- *  e1000_hash_mc_addr_generic - Generate a multicast hash value
- *  @hw: pointer to the HW structure
- *  @mc_addr: pointer to a multicast address
- *
- *  Generates a multicast address hash value which is used to determine
- *  the multicast filter table array address and new table value.
- **/
-u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr)
-{
-	u32 hash_value, hash_mask;
-	u8 bit_shift = 0;
-
-	DEBUGFUNC("e1000_hash_mc_addr_generic");
-
-	/* Register count multiplied by bits per register */
-	hash_mask = (hw->mac.mta_reg_count * 32) - 1;
-
-	/* For a mc_filter_type of 0, bit_shift is the number of left-shifts
-	 * where 0xFF would still fall within the hash mask.
-	 */
-	while (hash_mask >> bit_shift != 0xFF)
-		bit_shift++;
-
-	/* The portion of the address that is used for the hash table
-	 * is determined by the mc_filter_type setting.
-	 * The algorithm is such that there is a total of 8 bits of shifting.
-	 * The bit_shift for a mc_filter_type of 0 represents the number of
-	 * left-shifts where the MSB of mc_addr[5] would still fall within
-	 * the hash_mask.  Case 0 does this exactly.  Since there are a total
-	 * of 8 bits of shifting, then mc_addr[4] will shift right the
-	 * remaining number of bits. Thus 8 - bit_shift.  The rest of the
-	 * cases are a variation of this algorithm...essentially raising the
-	 * number of bits to shift mc_addr[5] left, while still keeping the
-	 * 8-bit shifting total.
-	 *
-	 * For example, given the following Destination MAC Address and an
-	 * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
-	 * we can see that the bit_shift for case 0 is 4.  These are the hash
-	 * values resulting from each mc_filter_type...
-	 * [0] [1] [2] [3] [4] [5]
-	 * 01  AA  00  12  34  56
-	 * LSB		 MSB
-	 *
-	 * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
-	 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
-	 * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
-	 * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
-	 */
-	switch (hw->mac.mc_filter_type) {
-	default:
-	case 0:
-		break;
-	case 1:
-		bit_shift += 1;
-		break;
-	case 2:
-		bit_shift += 2;
-		break;
-	case 3:
-		bit_shift += 4;
-		break;
-	}
-
-	hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
-				  (((u16) mc_addr[5]) << bit_shift)));
-
-	return hash_value;
-}
-
-/**
- *  e1000_update_mc_addr_list_generic - Update Multicast addresses
- *  @hw: pointer to the HW structure
- *  @mc_addr_list: array of multicast addresses to program
- *  @mc_addr_count: number of multicast addresses to program
- *
- *  Updates entire Multicast Table Array.
- *  The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void e1000_update_mc_addr_list_generic(struct e1000_hw *hw,
-				       u8 *mc_addr_list, u32 mc_addr_count)
-{
-	u32 hash_value, hash_bit, hash_reg;
-	int i;
-
-	DEBUGFUNC("e1000_update_mc_addr_list_generic");
-
-	/* clear mta_shadow */
-	memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
-	/* update mta_shadow from mc_addr_list */
-	for (i = 0; (u32) i < mc_addr_count; i++) {
-		hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list);
-
-		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
-		hash_bit = hash_value & 0x1F;
-
-		hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
-		mc_addr_list += (ETH_ADDR_LEN);
-	}
-
-	/* replace the entire MTA table */
-	for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
-		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/**
- *  e1000_clear_hw_cntrs_base_generic - Clear base hardware counters
- *  @hw: pointer to the HW structure
- *
- *  Clears the base hardware counters by reading the counter registers.
- **/
-void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_clear_hw_cntrs_base_generic");
-
-	E1000_READ_REG(hw, E1000_CRCERRS);
-	E1000_READ_REG(hw, E1000_SYMERRS);
-	E1000_READ_REG(hw, E1000_MPC);
-	E1000_READ_REG(hw, E1000_SCC);
-	E1000_READ_REG(hw, E1000_ECOL);
-	E1000_READ_REG(hw, E1000_MCC);
-	E1000_READ_REG(hw, E1000_LATECOL);
-	E1000_READ_REG(hw, E1000_COLC);
-	E1000_READ_REG(hw, E1000_DC);
-	E1000_READ_REG(hw, E1000_SEC);
-	E1000_READ_REG(hw, E1000_RLEC);
-	E1000_READ_REG(hw, E1000_XONRXC);
-	E1000_READ_REG(hw, E1000_XONTXC);
-	E1000_READ_REG(hw, E1000_XOFFRXC);
-	E1000_READ_REG(hw, E1000_XOFFTXC);
-	E1000_READ_REG(hw, E1000_FCRUC);
-	E1000_READ_REG(hw, E1000_GPRC);
-	E1000_READ_REG(hw, E1000_BPRC);
-	E1000_READ_REG(hw, E1000_MPRC);
-	E1000_READ_REG(hw, E1000_GPTC);
-	E1000_READ_REG(hw, E1000_GORCL);
-	E1000_READ_REG(hw, E1000_GORCH);
-	E1000_READ_REG(hw, E1000_GOTCL);
-	E1000_READ_REG(hw, E1000_GOTCH);
-	E1000_READ_REG(hw, E1000_RNBC);
-	E1000_READ_REG(hw, E1000_RUC);
-	E1000_READ_REG(hw, E1000_RFC);
-	E1000_READ_REG(hw, E1000_ROC);
-	E1000_READ_REG(hw, E1000_RJC);
-	E1000_READ_REG(hw, E1000_TORL);
-	E1000_READ_REG(hw, E1000_TORH);
-	E1000_READ_REG(hw, E1000_TOTL);
-	E1000_READ_REG(hw, E1000_TOTH);
-	E1000_READ_REG(hw, E1000_TPR);
-	E1000_READ_REG(hw, E1000_TPT);
-	E1000_READ_REG(hw, E1000_MPTC);
-	E1000_READ_REG(hw, E1000_BPTC);
-}
-
-/**
- *  e1000_check_for_copper_link_generic - Check for link (Copper)
- *  @hw: pointer to the HW structure
- *
- *  Checks to see of the link status of the hardware has changed.  If a
- *  change in link status has been detected, then we read the PHY registers
- *  to get the current speed/duplex if link exists.
- **/
-s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val;
-	bool link;
-
-	DEBUGFUNC("e1000_check_for_copper_link");
-
-	/* We only want to go out to the PHY registers to see if Auto-Neg
-	 * has completed and/or if our link status has changed.  The
-	 * get_link_status flag is set upon receiving a Link Status
-	 * Change or Rx Sequence Error interrupt.
-	 */
-	if (!mac->get_link_status)
-		return E1000_SUCCESS;
-
-	/* First we want to see if the MII Status Register reports
-	 * link.  If so, then we want to get the current speed/duplex
-	 * of the PHY.
-	 */
-	ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link);
-	if (ret_val)
-		return ret_val;
-
-	if (!link)
-		return E1000_SUCCESS; /* No link detected */
-
-	mac->get_link_status = false;
-
-	/* Check if there was DownShift, must be checked
-	 * immediately after link-up
-	 */
-	e1000_check_downshift_generic(hw);
-
-	/* If we are forcing speed/duplex, then we simply return since
-	 * we have already determined whether we have link or not.
-	 */
-	if (!mac->autoneg)
-		return -E1000_ERR_CONFIG;
-
-	/* Auto-Neg is enabled.  Auto Speed Detection takes care
-	 * of MAC speed/duplex configuration.  So we only need to
-	 * configure Collision Distance in the MAC.
-	 */
-	mac->ops.config_collision_dist(hw);
-
-	/* Configure Flow Control now that Auto-Neg has completed.
-	 * First, we need to restore the desired flow control
-	 * settings because we may have had to re-autoneg with a
-	 * different link partner.
-	 */
-	ret_val = e1000_config_fc_after_link_up_generic(hw);
-	if (ret_val)
-		DEBUGOUT("Error configuring flow control\n");
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_fiber_link_generic - Check for link (Fiber)
- *  @hw: pointer to the HW structure
- *
- *  Checks for link up on the hardware.  If link is not up and we have
- *  a signal, then we need to force link up.
- **/
-s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 rxcw;
-	u32 ctrl;
-	u32 status;
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_check_for_fiber_link_generic");
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-	status = E1000_READ_REG(hw, E1000_STATUS);
-	rxcw = E1000_READ_REG(hw, E1000_RXCW);
-
-	/* If we don't have link (auto-negotiation failed or link partner
-	 * cannot auto-negotiate), the cable is plugged in (we have signal),
-	 * and our link partner is not trying to auto-negotiate with us (we
-	 * are receiving idles or data), we need to force link up. We also
-	 * need to give auto-negotiation time to complete, in case the cable
-	 * was just plugged in. The autoneg_failed flag does this.
-	 */
-	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
-	if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) &&
-	    !(rxcw & E1000_RXCW_C)) {
-		if (!mac->autoneg_failed) {
-			mac->autoneg_failed = true;
-			return E1000_SUCCESS;
-		}
-		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
-
-		/* Disable auto-negotiation in the TXCW register */
-		E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE));
-
-		/* Force link-up and also force full-duplex. */
-		ctrl = E1000_READ_REG(hw, E1000_CTRL);
-		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-
-		/* Configure Flow Control after forcing link up. */
-		ret_val = e1000_config_fc_after_link_up_generic(hw);
-		if (ret_val) {
-			DEBUGOUT("Error configuring flow control\n");
-			return ret_val;
-		}
-	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
-		/* If we are forcing link and we are receiving /C/ ordered
-		 * sets, re-enable auto-negotiation in the TXCW register
-		 * and disable forced link in the Device Control register
-		 * in an attempt to auto-negotiate with our link partner.
-		 */
-		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
-		E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw);
-		E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU));
-
-		mac->serdes_has_link = true;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_check_for_serdes_link_generic - Check for link (Serdes)
- *  @hw: pointer to the HW structure
- *
- *  Checks for link up on the hardware.  If link is not up and we have
- *  a signal, then we need to force link up.
- **/
-s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 rxcw;
-	u32 ctrl;
-	u32 status;
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_check_for_serdes_link_generic");
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-	status = E1000_READ_REG(hw, E1000_STATUS);
-	rxcw = E1000_READ_REG(hw, E1000_RXCW);
-
-	/* If we don't have link (auto-negotiation failed or link partner
-	 * cannot auto-negotiate), and our link partner is not trying to
-	 * auto-negotiate with us (we are receiving idles or data),
-	 * we need to force link up. We also need to give auto-negotiation
-	 * time to complete.
-	 */
-	/* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
-	if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) {
-		if (!mac->autoneg_failed) {
-			mac->autoneg_failed = true;
-			return E1000_SUCCESS;
-		}
-		DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
-
-		/* Disable auto-negotiation in the TXCW register */
-		E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE));
-
-		/* Force link-up and also force full-duplex. */
-		ctrl = E1000_READ_REG(hw, E1000_CTRL);
-		ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
-		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-
-		/* Configure Flow Control after forcing link up. */
-		ret_val = e1000_config_fc_after_link_up_generic(hw);
-		if (ret_val) {
-			DEBUGOUT("Error configuring flow control\n");
-			return ret_val;
-		}
-	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
-		/* If we are forcing link and we are receiving /C/ ordered
-		 * sets, re-enable auto-negotiation in the TXCW register
-		 * and disable forced link in the Device Control register
-		 * in an attempt to auto-negotiate with our link partner.
-		 */
-		DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
-		E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw);
-		E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU));
-
-		mac->serdes_has_link = true;
-	} else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) {
-		/* If we force link for non-auto-negotiation switch, check
-		 * link status based on MAC synchronization for internal
-		 * serdes media type.
-		 */
-		/* SYNCH bit and IV bit are sticky. */
-		usec_delay(10);
-		rxcw = E1000_READ_REG(hw, E1000_RXCW);
-		if (rxcw & E1000_RXCW_SYNCH) {
-			if (!(rxcw & E1000_RXCW_IV)) {
-				mac->serdes_has_link = true;
-				DEBUGOUT("SERDES: Link up - forced.\n");
-			}
-		} else {
-			mac->serdes_has_link = false;
-			DEBUGOUT("SERDES: Link down - force failed.\n");
-		}
-	}
-
-	if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) {
-		status = E1000_READ_REG(hw, E1000_STATUS);
-		if (status & E1000_STATUS_LU) {
-			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
-			usec_delay(10);
-			rxcw = E1000_READ_REG(hw, E1000_RXCW);
-			if (rxcw & E1000_RXCW_SYNCH) {
-				if (!(rxcw & E1000_RXCW_IV)) {
-					mac->serdes_has_link = true;
-					DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n");
-				} else {
-					mac->serdes_has_link = false;
-					DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n");
-				}
-			} else {
-				mac->serdes_has_link = false;
-				DEBUGOUT("SERDES: Link down - no sync.\n");
-			}
-		} else {
-			mac->serdes_has_link = false;
-			DEBUGOUT("SERDES: Link down - autoneg failed\n");
-		}
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_set_default_fc_generic - Set flow control default values
- *  @hw: pointer to the HW structure
- *
- *  Read the EEPROM for the default values for flow control and store the
- *  values.
- **/
-static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 nvm_data;
-
-	DEBUGFUNC("e1000_set_default_fc_generic");
-
-	/* Read and store word 0x0F of the EEPROM. This word contains bits
-	 * that determine the hardware's default PAUSE (flow control) mode,
-	 * a bit that determines whether the HW defaults to enabling or
-	 * disabling auto-negotiation, and the direction of the
-	 * SW defined pins. If there is no SW over-ride of the flow
-	 * control setting, then the variable hw->fc will
-	 * be initialized based on a value in the EEPROM.
-	 */
-	ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
-
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if (!(nvm_data & NVM_WORD0F_PAUSE_MASK))
-		hw->fc.requested_mode = e1000_fc_none;
-	else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
-		 NVM_WORD0F_ASM_DIR)
-		hw->fc.requested_mode = e1000_fc_tx_pause;
-	else
-		hw->fc.requested_mode = e1000_fc_full;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_setup_link_generic - Setup flow control and link settings
- *  @hw: pointer to the HW structure
- *
- *  Determines which flow control settings to use, then configures flow
- *  control.  Calls the appropriate media-specific link configuration
- *  function.  Assuming the adapter has a valid link partner, a valid link
- *  should be established.  Assumes the hardware has previously been reset
- *  and the transmitter and receiver are not enabled.
- **/
-s32 e1000_setup_link_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_setup_link_generic");
-
-	/* In the case of the phy reset being blocked, we already have a link.
-	 * We do not need to set it up again.
-	 */
-	if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw))
-		return E1000_SUCCESS;
-
-	/* If requested flow control is set to default, set flow control
-	 * based on the EEPROM flow control settings.
-	 */
-	if (hw->fc.requested_mode == e1000_fc_default) {
-		ret_val = e1000_set_default_fc_generic(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
-	/* Save off the requested flow control mode for use later.  Depending
-	 * on the link partner's capabilities, we may or may not use this mode.
-	 */
-	hw->fc.current_mode = hw->fc.requested_mode;
-
-	DEBUGOUT1("After fix-ups FlowControl is now = %x\n",
-		hw->fc.current_mode);
-
-	/* Call the necessary media_type subroutine to configure the link. */
-	ret_val = hw->mac.ops.setup_physical_interface(hw);
-	if (ret_val)
-		return ret_val;
-
-	/* Initialize the flow control address, type, and PAUSE timer
-	 * registers to their default values.  This is done even if flow
-	 * control is disabled, because it does not hurt anything to
-	 * initialize these registers.
-	 */
-	DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
-	E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE);
-	E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
-	E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
-
-	E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time);
-
-	return e1000_set_fc_watermarks_generic(hw);
-}
-
-/**
- *  e1000_commit_fc_settings_generic - Configure flow control
- *  @hw: pointer to the HW structure
- *
- *  Write the flow control settings to the Transmit Config Word Register (TXCW)
- *  base on the flow control settings in e1000_mac_info.
- **/
-static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 txcw;
-
-	DEBUGFUNC("e1000_commit_fc_settings_generic");
-
-	/* Check for a software override of the flow control settings, and
-	 * setup the device accordingly.  If auto-negotiation is enabled, then
-	 * software will have to set the "PAUSE" bits to the correct value in
-	 * the Transmit Config Word Register (TXCW) and re-start auto-
-	 * negotiation.  However, if auto-negotiation is disabled, then
-	 * software will have to manually configure the two flow control enable
-	 * bits in the CTRL register.
-	 *
-	 * The possible values of the "fc" parameter are:
-	 *      0:  Flow control is completely disabled
-	 *      1:  Rx flow control is enabled (we can receive pause frames,
-	 *          but not send pause frames).
-	 *      2:  Tx flow control is enabled (we can send pause frames but we
-	 *          do not support receiving pause frames).
-	 *      3:  Both Rx and Tx flow control (symmetric) are enabled.
-	 */
-	switch (hw->fc.current_mode) {
-	case e1000_fc_none:
-		/* Flow control completely disabled by a software over-ride. */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
-		break;
-	case e1000_fc_rx_pause:
-		/* Rx Flow control is enabled and Tx Flow control is disabled
-		 * by a software over-ride. Since there really isn't a way to
-		 * advertise that we are capable of Rx Pause ONLY, we will
-		 * advertise that we support both symmetric and asymmetric Rx
-		 * PAUSE.  Later, we will disable the adapter's ability to send
-		 * PAUSE frames.
-		 */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
-		break;
-	case e1000_fc_tx_pause:
-		/* Tx Flow control is enabled, and Rx Flow control is disabled,
-		 * by a software over-ride.
-		 */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
-		break;
-	case e1000_fc_full:
-		/* Flow control (both Rx and Tx) is enabled by a software
-		 * over-ride.
-		 */
-		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
-		break;
-	default:
-		DEBUGOUT("Flow control param set incorrectly\n");
-		return -E1000_ERR_CONFIG;
-		break;
-	}
-
-	E1000_WRITE_REG(hw, E1000_TXCW, txcw);
-	mac->txcw = txcw;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_poll_fiber_serdes_link_generic - Poll for link up
- *  @hw: pointer to the HW structure
- *
- *  Polls for link up by reading the status register, if link fails to come
- *  up with auto-negotiation, then the link is forced if a signal is detected.
- **/
-static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	u32 i, status;
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_poll_fiber_serdes_link_generic");
-
-	/* If we have a signal (the cable is plugged in, or assumed true for
-	 * serdes media) then poll for a "Link-Up" indication in the Device
-	 * Status Register.  Time-out if a link isn't seen in 500 milliseconds
-	 * seconds (Auto-negotiation should complete in less than 500
-	 * milliseconds even if the other end is doing it in SW).
-	 */
-	for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
-		msec_delay(10);
-		status = E1000_READ_REG(hw, E1000_STATUS);
-		if (status & E1000_STATUS_LU)
-			break;
-	}
-	if (i == FIBER_LINK_UP_LIMIT) {
-		DEBUGOUT("Never got a valid link from auto-neg!!!\n");
-		mac->autoneg_failed = true;
-		/* AutoNeg failed to achieve a link, so we'll call
-		 * mac->check_for_link. This routine will force the
-		 * link up if we detect a signal. This will allow us to
-		 * communicate with non-autonegotiating link partners.
-		 */
-		ret_val = mac->ops.check_for_link(hw);
-		if (ret_val) {
-			DEBUGOUT("Error while checking for link\n");
-			return ret_val;
-		}
-		mac->autoneg_failed = false;
-	} else {
-		mac->autoneg_failed = false;
-		DEBUGOUT("Valid Link Found\n");
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes
- *  @hw: pointer to the HW structure
- *
- *  Configures collision distance and flow control for fiber and serdes
- *  links.  Upon successful setup, poll for link.
- **/
-s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_setup_fiber_serdes_link_generic");
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-
-	/* Take the link out of reset */
-	ctrl &= ~E1000_CTRL_LRST;
-
-	hw->mac.ops.config_collision_dist(hw);
-
-	ret_val = e1000_commit_fc_settings_generic(hw);
-	if (ret_val)
-		return ret_val;
-
-	/* Since auto-negotiation is enabled, take the link out of reset (the
-	 * link will be in reset, because we previously reset the chip). This
-	 * will restart auto-negotiation.  If auto-negotiation is successful
-	 * then the link-up status bit will be set and the flow control enable
-	 * bits (RFCE and TFCE) will be set according to their negotiated value.
-	 */
-	DEBUGOUT("Auto-negotiation enabled\n");
-
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-	E1000_WRITE_FLUSH(hw);
-	msec_delay(1);
-
-	/* For these adapters, the SW definable pin 1 is set when the optics
-	 * detect a signal.  If we have a signal, then poll for a "Link-Up"
-	 * indication.
-	 */
-	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
-	    (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) {
-		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
-	} else {
-		DEBUGOUT("No signal detected\n");
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_config_collision_dist_generic - Configure collision distance
- *  @hw: pointer to the HW structure
- *
- *  Configures the collision distance to the default value and is used
- *  during link setup.
- **/
-static void e1000_config_collision_dist_generic(struct e1000_hw *hw)
-{
-	u32 tctl;
-
-	DEBUGFUNC("e1000_config_collision_dist_generic");
-
-	tctl = E1000_READ_REG(hw, E1000_TCTL);
-
-	tctl &= ~E1000_TCTL_COLD;
-	tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
-
-	E1000_WRITE_REG(hw, E1000_TCTL, tctl);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/**
- *  e1000_set_fc_watermarks_generic - Set flow control high/low watermarks
- *  @hw: pointer to the HW structure
- *
- *  Sets the flow control high/low threshold (watermark) registers.  If
- *  flow control XON frame transmission is enabled, then set XON frame
- *  transmission as well.
- **/
-s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw)
-{
-	u32 fcrtl = 0, fcrth = 0;
-
-	DEBUGFUNC("e1000_set_fc_watermarks_generic");
-
-	/* Set the flow control receive threshold registers.  Normally,
-	 * these registers will be set to a default threshold that may be
-	 * adjusted later by the driver's runtime code.  However, if the
-	 * ability to transmit pause frames is not enabled, then these
-	 * registers will be set to 0.
-	 */
-	if (hw->fc.current_mode & e1000_fc_tx_pause) {
-		/* We need to set up the Receive Threshold high and low water
-		 * marks as well as (optionally) enabling the transmission of
-		 * XON frames.
-		 */
-		fcrtl = hw->fc.low_water;
-		if (hw->fc.send_xon)
-			fcrtl |= E1000_FCRTL_XONE;
-
-		fcrth = hw->fc.high_water;
-	}
-	E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl);
-	E1000_WRITE_REG(hw, E1000_FCRTH, fcrth);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_force_mac_fc_generic - Force the MAC's flow control settings
- *  @hw: pointer to the HW structure
- *
- *  Force the MAC's flow control settings.  Sets the TFCE and RFCE bits in the
- *  device control register to reflect the adapter settings.  TFCE and RFCE
- *  need to be explicitly set by software when a copper PHY is used because
- *  autonegotiation is managed by the PHY rather than the MAC.  Software must
- *  also configure these bits when link is forced on a fiber connection.
- **/
-s32 e1000_force_mac_fc_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-
-	DEBUGFUNC("e1000_force_mac_fc_generic");
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-
-	/* Because we didn't get link via the internal auto-negotiation
-	 * mechanism (we either forced link or we got link via PHY
-	 * auto-neg), we have to manually enable/disable transmit an
-	 * receive flow control.
-	 *
-	 * The "Case" statement below enables/disable flow control
-	 * according to the "hw->fc.current_mode" parameter.
-	 *
-	 * The possible values of the "fc" parameter are:
-	 *      0:  Flow control is completely disabled
-	 *      1:  Rx flow control is enabled (we can receive pause
-	 *          frames but not send pause frames).
-	 *      2:  Tx flow control is enabled (we can send pause frames
-	 *          frames but we do not receive pause frames).
-	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
-	 *  other:  No other values should be possible at this point.
-	 */
-	DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode);
-
-	switch (hw->fc.current_mode) {
-	case e1000_fc_none:
-		ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
-		break;
-	case e1000_fc_rx_pause:
-		ctrl &= (~E1000_CTRL_TFCE);
-		ctrl |= E1000_CTRL_RFCE;
-		break;
-	case e1000_fc_tx_pause:
-		ctrl &= (~E1000_CTRL_RFCE);
-		ctrl |= E1000_CTRL_TFCE;
-		break;
-	case e1000_fc_full:
-		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
-		break;
-	default:
-		DEBUGOUT("Flow control param set incorrectly\n");
-		return -E1000_ERR_CONFIG;
-	}
-
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_config_fc_after_link_up_generic - Configures flow control after link
- *  @hw: pointer to the HW structure
- *
- *  Checks the status of auto-negotiation after link up to ensure that the
- *  speed and duplex were not forced.  If the link needed to be forced, then
- *  flow control needs to be forced also.  If auto-negotiation is enabled
- *  and did not fail, then we configure flow control based on our link
- *  partner.
- **/
-s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val = E1000_SUCCESS;
-	u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg;
-	u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
-	u16 speed, duplex;
-
-	DEBUGFUNC("e1000_config_fc_after_link_up_generic");
-
-	/* Check for the case where we have fiber media and auto-neg failed
-	 * so we had to force link.  In this case, we need to force the
-	 * configuration of the MAC to match the "fc" parameter.
-	 */
-	if (mac->autoneg_failed) {
-		if (hw->phy.media_type == e1000_media_type_fiber ||
-		    hw->phy.media_type == e1000_media_type_internal_serdes)
-			ret_val = e1000_force_mac_fc_generic(hw);
-	} else {
-		if (hw->phy.media_type == e1000_media_type_copper)
-			ret_val = e1000_force_mac_fc_generic(hw);
-	}
-
-	if (ret_val) {
-		DEBUGOUT("Error forcing flow control settings\n");
-		return ret_val;
-	}
-
-	/* Check for the case where we have copper media and auto-neg is
-	 * enabled.  In this case, we need to check and see if Auto-Neg
-	 * has completed, and if so, how the PHY and link partner has
-	 * flow control configured.
-	 */
-	if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
-		/* Read the MII Status Register and check to see if AutoNeg
-		 * has completed.  We read this twice because this reg has
-		 * some "sticky" (latched) bits.
-		 */
-		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
-		if (ret_val)
-			return ret_val;
-		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg);
-		if (ret_val)
-			return ret_val;
-
-		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-			DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
-			return ret_val;
-		}
-
-		/* The AutoNeg process has completed, so we now need to
-		 * read both the Auto Negotiation Advertisement
-		 * Register (Address 4) and the Auto_Negotiation Base
-		 * Page Ability Register (Address 5) to determine how
-		 * flow control was negotiated.
-		 */
-		ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
-					       &mii_nway_adv_reg);
-		if (ret_val)
-			return ret_val;
-		ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
-					       &mii_nway_lp_ability_reg);
-		if (ret_val)
-			return ret_val;
-
-		/* Two bits in the Auto Negotiation Advertisement Register
-		 * (Address 4) and two bits in the Auto Negotiation Base
-		 * Page Ability Register (Address 5) determine flow control
-		 * for both the PHY and the link partner.  The following
-		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
-		 * 1999, describes these PAUSE resolution bits and how flow
-		 * control is determined based upon these settings.
-		 * NOTE:  DC = Don't Care
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
-		 *   0   |    1    |   0   |   DC    | e1000_fc_none
-		 *   0   |    1    |   1   |    0    | e1000_fc_none
-		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 *   1   |    0    |   0   |   DC    | e1000_fc_none
-		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
-		 *   1   |    1    |   0   |    0    | e1000_fc_none
-		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 *
-		 * Are both PAUSE bits set to 1?  If so, this implies
-		 * Symmetric Flow Control is enabled at both ends.  The
-		 * ASM_DIR bits are irrelevant per the spec.
-		 *
-		 * For Symmetric Flow Control:
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |   DC    |   1   |   DC    | E1000_fc_full
-		 *
-		 */
-		if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-		    (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
-			/* Now we need to check if the user selected Rx ONLY
-			 * of pause frames.  In this case, we had to advertise
-			 * FULL flow control because we could not advertise Rx
-			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF the TRANSMISSION of PAUSE frames.
-			 */
-			if (hw->fc.requested_mode == e1000_fc_full) {
-				hw->fc.current_mode = e1000_fc_full;
-				DEBUGOUT("Flow Control = FULL.\n");
-			} else {
-				hw->fc.current_mode = e1000_fc_rx_pause;
-				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
-			}
-		}
-		/* For receiving PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 */
-		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-			hw->fc.current_mode = e1000_fc_tx_pause;
-			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
-		}
-		/* For transmitting PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 */
-		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
-			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
-			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
-			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
-			hw->fc.current_mode = e1000_fc_rx_pause;
-			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
-		} else {
-			/* Per the IEEE spec, at this point flow control
-			 * should be disabled.
-			 */
-			hw->fc.current_mode = e1000_fc_none;
-			DEBUGOUT("Flow Control = NONE.\n");
-		}
-
-		/* Now we need to do one last check...  If we auto-
-		 * negotiated to HALF DUPLEX, flow control should not be
-		 * enabled per IEEE 802.3 spec.
-		 */
-		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
-		if (ret_val) {
-			DEBUGOUT("Error getting link speed and duplex\n");
-			return ret_val;
-		}
-
-		if (duplex == HALF_DUPLEX)
-			hw->fc.current_mode = e1000_fc_none;
-
-		/* Now we call a subroutine to actually force the MAC
-		 * controller to use the correct flow control settings.
-		 */
-		ret_val = e1000_force_mac_fc_generic(hw);
-		if (ret_val) {
-			DEBUGOUT("Error forcing flow control settings\n");
-			return ret_val;
-		}
-	}
-
-	/* Check for the case where we have SerDes media and auto-neg is
-	 * enabled.  In this case, we need to check and see if Auto-Neg
-	 * has completed, and if so, how the PHY and link partner has
-	 * flow control configured.
-	 */
-	if ((hw->phy.media_type == e1000_media_type_internal_serdes) &&
-	    mac->autoneg) {
-		/* Read the PCS_LSTS and check to see if AutoNeg
-		 * has completed.
-		 */
-		pcs_status_reg = E1000_READ_REG(hw, E1000_PCS_LSTAT);
-
-		if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) {
-			DEBUGOUT("PCS Auto Neg has not completed.\n");
-			return ret_val;
-		}
-
-		/* The AutoNeg process has completed, so we now need to
-		 * read both the Auto Negotiation Advertisement
-		 * Register (PCS_ANADV) and the Auto_Negotiation Base
-		 * Page Ability Register (PCS_LPAB) to determine how
-		 * flow control was negotiated.
-		 */
-		pcs_adv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV);
-		pcs_lp_ability_reg = E1000_READ_REG(hw, E1000_PCS_LPAB);
-
-		/* Two bits in the Auto Negotiation Advertisement Register
-		 * (PCS_ANADV) and two bits in the Auto Negotiation Base
-		 * Page Ability Register (PCS_LPAB) determine flow control
-		 * for both the PHY and the link partner.  The following
-		 * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
-		 * 1999, describes these PAUSE resolution bits and how flow
-		 * control is determined based upon these settings.
-		 * NOTE:  DC = Don't Care
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    0    |  DC   |   DC    | e1000_fc_none
-		 *   0   |    1    |   0   |   DC    | e1000_fc_none
-		 *   0   |    1    |   1   |    0    | e1000_fc_none
-		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 *   1   |    0    |   0   |   DC    | e1000_fc_none
-		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
-		 *   1   |    1    |   0   |    0    | e1000_fc_none
-		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 *
-		 * Are both PAUSE bits set to 1?  If so, this implies
-		 * Symmetric Flow Control is enabled at both ends.  The
-		 * ASM_DIR bits are irrelevant per the spec.
-		 *
-		 * For Symmetric Flow Control:
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |   DC    |   1   |   DC    | e1000_fc_full
-		 *
-		 */
-		if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
-		    (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) {
-			/* Now we need to check if the user selected Rx ONLY
-			 * of pause frames.  In this case, we had to advertise
-			 * FULL flow control because we could not advertise Rx
-			 * ONLY. Hence, we must now check to see if we need to
-			 * turn OFF the TRANSMISSION of PAUSE frames.
-			 */
-			if (hw->fc.requested_mode == e1000_fc_full) {
-				hw->fc.current_mode = e1000_fc_full;
-				DEBUGOUT("Flow Control = FULL.\n");
-			} else {
-				hw->fc.current_mode = e1000_fc_rx_pause;
-				DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
-			}
-		}
-		/* For receiving PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 */
-		else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) &&
-			  (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
-			  (pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
-			  (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
-			hw->fc.current_mode = e1000_fc_tx_pause;
-			DEBUGOUT("Flow Control = Tx PAUSE frames only.\n");
-		}
-		/* For transmitting PAUSE frames ONLY.
-		 *
-		 *   LOCAL DEVICE  |   LINK PARTNER
-		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
-		 *-------|---------|-------|---------|--------------------
-		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 */
-		else if ((pcs_adv_reg & E1000_TXCW_PAUSE) &&
-			 (pcs_adv_reg & E1000_TXCW_ASM_DIR) &&
-			 !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) &&
-			 (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) {
-			hw->fc.current_mode = e1000_fc_rx_pause;
-			DEBUGOUT("Flow Control = Rx PAUSE frames only.\n");
-		} else {
-			/* Per the IEEE spec, at this point flow control
-			 * should be disabled.
-			 */
-			hw->fc.current_mode = e1000_fc_none;
-			DEBUGOUT("Flow Control = NONE.\n");
-		}
-
-		/* Now we call a subroutine to actually force the MAC
-		 * controller to use the correct flow control settings.
-		 */
-		pcs_ctrl_reg = E1000_READ_REG(hw, E1000_PCS_LCTL);
-		pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL;
-		E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_ctrl_reg);
-
-		ret_val = e1000_force_mac_fc_generic(hw);
-		if (ret_val) {
-			DEBUGOUT("Error forcing flow control settings\n");
-			return ret_val;
-		}
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex
- *  @hw: pointer to the HW structure
- *  @speed: stores the current speed
- *  @duplex: stores the current duplex
- *
- *  Read the status register for the current speed/duplex and store the current
- *  speed and duplex for copper connections.
- **/
-s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
-					      u16 *duplex)
-{
-	u32 status;
-
-	DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic");
-
-	status = E1000_READ_REG(hw, E1000_STATUS);
-	if (status & E1000_STATUS_SPEED_1000) {
-		*speed = SPEED_1000;
-		DEBUGOUT("1000 Mbs, ");
-	} else if (status & E1000_STATUS_SPEED_100) {
-		*speed = SPEED_100;
-		DEBUGOUT("100 Mbs, ");
-	} else {
-		*speed = SPEED_10;
-		DEBUGOUT("10 Mbs, ");
-	}
-
-	if (status & E1000_STATUS_FD) {
-		*duplex = FULL_DUPLEX;
-		DEBUGOUT("Full Duplex\n");
-	} else {
-		*duplex = HALF_DUPLEX;
-		DEBUGOUT("Half Duplex\n");
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex
- *  @hw: pointer to the HW structure
- *  @speed: stores the current speed
- *  @duplex: stores the current duplex
- *
- *  Sets the speed and duplex to gigabit full duplex (the only possible option)
- *  for fiber/serdes links.
- **/
-s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSEDARG *hw,
-						    u16 *speed, u16 *duplex)
-{
-	DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic");
-
-	*speed = SPEED_1000;
-	*duplex = FULL_DUPLEX;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_get_hw_semaphore_generic - Acquire hardware semaphore
- *  @hw: pointer to the HW structure
- *
- *  Acquire the HW semaphore to access the PHY or NVM
- **/
-s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw)
-{
-	u32 swsm;
-	s32 timeout = hw->nvm.word_size + 1;
-	s32 i = 0;
-
-	DEBUGFUNC("e1000_get_hw_semaphore_generic");
-
-	/* Get the SW semaphore */
-	while (i < timeout) {
-		swsm = E1000_READ_REG(hw, E1000_SWSM);
-		if (!(swsm & E1000_SWSM_SMBI))
-			break;
-
-		usec_delay(50);
-		i++;
-	}
-
-	if (i == timeout) {
-		DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
-		return -E1000_ERR_NVM;
-	}
-
-	/* Get the FW semaphore. */
-	for (i = 0; i < timeout; i++) {
-		swsm = E1000_READ_REG(hw, E1000_SWSM);
-		E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
-
-		/* Semaphore acquired if bit latched */
-		if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
-			break;
-
-		usec_delay(50);
-	}
-
-	if (i == timeout) {
-		/* Release semaphores */
-		e1000_put_hw_semaphore_generic(hw);
-		DEBUGOUT("Driver can't access the NVM\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_put_hw_semaphore_generic - Release hardware semaphore
- *  @hw: pointer to the HW structure
- *
- *  Release hardware semaphore used to access the PHY or NVM
- **/
-void e1000_put_hw_semaphore_generic(struct e1000_hw *hw)
-{
-	u32 swsm;
-
-	DEBUGFUNC("e1000_put_hw_semaphore_generic");
-
-	swsm = E1000_READ_REG(hw, E1000_SWSM);
-
-	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
-
-	E1000_WRITE_REG(hw, E1000_SWSM, swsm);
-}
-
-/**
- *  e1000_get_auto_rd_done_generic - Check for auto read completion
- *  @hw: pointer to the HW structure
- *
- *  Check EEPROM for Auto Read done bit.
- **/
-s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw)
-{
-	s32 i = 0;
-
-	DEBUGFUNC("e1000_get_auto_rd_done_generic");
-
-	while (i < AUTO_READ_DONE_TIMEOUT) {
-		if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD)
-			break;
-		msec_delay(1);
-		i++;
-	}
-
-	if (i == AUTO_READ_DONE_TIMEOUT) {
-		DEBUGOUT("Auto read by HW from NVM has not completed.\n");
-		return -E1000_ERR_RESET;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_valid_led_default_generic - Verify a valid default LED config
- *  @hw: pointer to the HW structure
- *  @data: pointer to the NVM (EEPROM)
- *
- *  Read the EEPROM for the current default LED configuration.  If the
- *  LED configuration is not valid, set to a valid LED configuration.
- **/
-s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_valid_led_default_generic");
-
-	ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
-		*data = ID_LED_DEFAULT;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_id_led_init_generic -
- *  @hw: pointer to the HW structure
- *
- **/
-s32 e1000_id_led_init_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-	s32 ret_val;
-	const u32 ledctl_mask = 0x000000FF;
-	const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
-	const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
-	u16 data, i, temp;
-	const u16 led_mask = 0x0F;
-
-	DEBUGFUNC("e1000_id_led_init_generic");
-
-	ret_val = hw->nvm.ops.valid_led_default(hw, &data);
-	if (ret_val)
-		return ret_val;
-
-	mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL);
-	mac->ledctl_mode1 = mac->ledctl_default;
-	mac->ledctl_mode2 = mac->ledctl_default;
-
-	for (i = 0; i < 4; i++) {
-		temp = (data >> (i << 2)) & led_mask;
-		switch (temp) {
-		case ID_LED_ON1_DEF2:
-		case ID_LED_ON1_ON2:
-		case ID_LED_ON1_OFF2:
-			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode1 |= ledctl_on << (i << 3);
-			break;
-		case ID_LED_OFF1_DEF2:
-		case ID_LED_OFF1_ON2:
-		case ID_LED_OFF1_OFF2:
-			mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode1 |= ledctl_off << (i << 3);
-			break;
-		default:
-			/* Do nothing */
-			break;
-		}
-		switch (temp) {
-		case ID_LED_DEF1_ON2:
-		case ID_LED_ON1_ON2:
-		case ID_LED_OFF1_ON2:
-			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode2 |= ledctl_on << (i << 3);
-			break;
-		case ID_LED_DEF1_OFF2:
-		case ID_LED_ON1_OFF2:
-		case ID_LED_OFF1_OFF2:
-			mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
-			mac->ledctl_mode2 |= ledctl_off << (i << 3);
-			break;
-		default:
-			/* Do nothing */
-			break;
-		}
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_setup_led_generic - Configures SW controllable LED
- *  @hw: pointer to the HW structure
- *
- *  This prepares the SW controllable LED for use and saves the current state
- *  of the LED so it can be later restored.
- **/
-s32 e1000_setup_led_generic(struct e1000_hw *hw)
-{
-	u32 ledctl;
-
-	DEBUGFUNC("e1000_setup_led_generic");
-
-	if (hw->mac.ops.setup_led != e1000_setup_led_generic)
-		return -E1000_ERR_CONFIG;
-
-	if (hw->phy.media_type == e1000_media_type_fiber) {
-		ledctl = E1000_READ_REG(hw, E1000_LEDCTL);
-		hw->mac.ledctl_default = ledctl;
-		/* Turn off LED0 */
-		ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK |
-			    E1000_LEDCTL_LED0_MODE_MASK);
-		ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
-			   E1000_LEDCTL_LED0_MODE_SHIFT);
-		E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl);
-	} else if (hw->phy.media_type == e1000_media_type_copper) {
-		E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_cleanup_led_generic - Set LED config to default operation
- *  @hw: pointer to the HW structure
- *
- *  Remove the current LED configuration and set the LED configuration
- *  to the default value, saved from the EEPROM.
- **/
-s32 e1000_cleanup_led_generic(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_cleanup_led_generic");
-
-	E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default);
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_blink_led_generic - Blink LED
- *  @hw: pointer to the HW structure
- *
- *  Blink the LEDs which are set to be on.
- **/
-s32 e1000_blink_led_generic(struct e1000_hw *hw)
-{
-	u32 ledctl_blink = 0;
-	u32 i;
-
-	DEBUGFUNC("e1000_blink_led_generic");
-
-	if (hw->phy.media_type == e1000_media_type_fiber) {
-		/* always blink LED0 for PCI-E fiber */
-		ledctl_blink = E1000_LEDCTL_LED0_BLINK |
-		     (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
-	} else {
-		/* Set the blink bit for each LED that's "on" (0x0E)
-		 * (or "off" if inverted) in ledctl_mode2.  The blink
-		 * logic in hardware only works when mode is set to "on"
-		 * so it must be changed accordingly when the mode is
-		 * "off" and inverted.
-		 */
-		ledctl_blink = hw->mac.ledctl_mode2;
-		for (i = 0; i < 32; i += 8) {
-			u32 mode = (hw->mac.ledctl_mode2 >> i) &
-			    E1000_LEDCTL_LED0_MODE_MASK;
-			u32 led_default = hw->mac.ledctl_default >> i;
-
-			if ((!(led_default & E1000_LEDCTL_LED0_IVRT) &&
-			     (mode == E1000_LEDCTL_MODE_LED_ON)) ||
-			    ((led_default & E1000_LEDCTL_LED0_IVRT) &&
-			     (mode == E1000_LEDCTL_MODE_LED_OFF))) {
-				ledctl_blink &=
-				    ~(E1000_LEDCTL_LED0_MODE_MASK << i);
-				ledctl_blink |= (E1000_LEDCTL_LED0_BLINK |
-						 E1000_LEDCTL_MODE_LED_ON) << i;
-			}
-		}
-	}
-
-	E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_led_on_generic - Turn LED on
- *  @hw: pointer to the HW structure
- *
- *  Turn LED on.
- **/
-s32 e1000_led_on_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-
-	DEBUGFUNC("e1000_led_on_generic");
-
-	switch (hw->phy.media_type) {
-	case e1000_media_type_fiber:
-		ctrl = E1000_READ_REG(hw, E1000_CTRL);
-		ctrl &= ~E1000_CTRL_SWDPIN0;
-		ctrl |= E1000_CTRL_SWDPIO0;
-		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-		break;
-	case e1000_media_type_copper:
-		E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2);
-		break;
-	default:
-		break;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_led_off_generic - Turn LED off
- *  @hw: pointer to the HW structure
- *
- *  Turn LED off.
- **/
-s32 e1000_led_off_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-
-	DEBUGFUNC("e1000_led_off_generic");
-
-	switch (hw->phy.media_type) {
-	case e1000_media_type_fiber:
-		ctrl = E1000_READ_REG(hw, E1000_CTRL);
-		ctrl |= E1000_CTRL_SWDPIN0;
-		ctrl |= E1000_CTRL_SWDPIO0;
-		E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-		break;
-	case e1000_media_type_copper:
-		E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1);
-		break;
-	default:
-		break;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities
- *  @hw: pointer to the HW structure
- *  @no_snoop: bitmap of snoop events
- *
- *  Set the PCI-express register to snoop for events enabled in 'no_snoop'.
- **/
-void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop)
-{
-	u32 gcr;
-
-	DEBUGFUNC("e1000_set_pcie_no_snoop_generic");
-
-	if (no_snoop) {
-		gcr = E1000_READ_REG(hw, E1000_GCR);
-		gcr &= ~(PCIE_NO_SNOOP_ALL);
-		gcr |= no_snoop;
-		E1000_WRITE_REG(hw, E1000_GCR, gcr);
-	}
-}
-
-/**
- *  e1000_disable_pcie_master_generic - Disables PCI-express master access
- *  @hw: pointer to the HW structure
- *
- *  Returns E1000_SUCCESS if successful, else returns -10
- *  (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
- *  the master requests to be disabled.
- *
- *  Disables PCI-Express master access and verifies there are no pending
- *  requests.
- **/
-s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw)
-{
-	u32 ctrl;
-	s32 timeout = MASTER_DISABLE_TIMEOUT;
-
-	DEBUGFUNC("e1000_disable_pcie_master_generic");
-
-	ctrl = E1000_READ_REG(hw, E1000_CTRL);
-	ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
-	E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
-
-	while (timeout) {
-		if (!(E1000_READ_REG(hw, E1000_STATUS) &
-		      E1000_STATUS_GIO_MASTER_ENABLE))
-			break;
-		usec_delay(100);
-		timeout--;
-	}
-
-	if (!timeout) {
-		DEBUGOUT("Master requests are pending.\n");
-		return -E1000_ERR_MASTER_REQUESTS_PENDING;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing
- *  @hw: pointer to the HW structure
- *
- *  Reset the Adaptive Interframe Spacing throttle to default values.
- **/
-void e1000_reset_adaptive_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-
-	DEBUGFUNC("e1000_reset_adaptive_generic");
-
-	if (!mac->adaptive_ifs) {
-		DEBUGOUT("Not in Adaptive IFS mode!\n");
-		return;
-	}
-
-	mac->current_ifs_val = 0;
-	mac->ifs_min_val = IFS_MIN;
-	mac->ifs_max_val = IFS_MAX;
-	mac->ifs_step_size = IFS_STEP;
-	mac->ifs_ratio = IFS_RATIO;
-
-	mac->in_ifs_mode = false;
-	E1000_WRITE_REG(hw, E1000_AIT, 0);
-}
-
-/**
- *  e1000_update_adaptive_generic - Update Adaptive Interframe Spacing
- *  @hw: pointer to the HW structure
- *
- *  Update the Adaptive Interframe Spacing Throttle value based on the
- *  time between transmitted packets and time between collisions.
- **/
-void e1000_update_adaptive_generic(struct e1000_hw *hw)
-{
-	struct e1000_mac_info *mac = &hw->mac;
-
-	DEBUGFUNC("e1000_update_adaptive_generic");
-
-	if (!mac->adaptive_ifs) {
-		DEBUGOUT("Not in Adaptive IFS mode!\n");
-		return;
-	}
-
-	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
-		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
-			mac->in_ifs_mode = true;
-			if (mac->current_ifs_val < mac->ifs_max_val) {
-				if (!mac->current_ifs_val)
-					mac->current_ifs_val = mac->ifs_min_val;
-				else
-					mac->current_ifs_val +=
-						mac->ifs_step_size;
-				E1000_WRITE_REG(hw, E1000_AIT,
-						mac->current_ifs_val);
-			}
-		}
-	} else {
-		if (mac->in_ifs_mode &&
-		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
-			mac->current_ifs_val = 0;
-			mac->in_ifs_mode = false;
-			E1000_WRITE_REG(hw, E1000_AIT, 0);
-		}
-	}
-}
-
-/**
- *  e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings
- *  @hw: pointer to the HW structure
- *
- *  Verify that when not using auto-negotiation that MDI/MDIx is correctly
- *  set, which is forced to MDI mode only.
- **/
-static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw)
-{
-	DEBUGFUNC("e1000_validate_mdi_setting_generic");
-
-	if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
-		DEBUGOUT("Invalid MDI setting detected\n");
-		hw->phy.mdix = 1;
-		return -E1000_ERR_CONFIG;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings
- *  @hw: pointer to the HW structure
- *
- *  Validate the MDI/MDIx setting, allowing for auto-crossover during forced
- *  operation.
- **/
-s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw E1000_UNUSEDARG *hw)
-{
-	DEBUGFUNC("e1000_validate_mdi_setting_crossover_generic");
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register
- *  @hw: pointer to the HW structure
- *  @reg: 32bit register offset such as E1000_SCTL
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Writes an address/data control type register.  There are several of these
- *  and they all have the format address << 8 | data and bit 31 is polled for
- *  completion.
- **/
-s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
-				      u32 offset, u8 data)
-{
-	u32 i, regvalue = 0;
-
-	DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic");
-
-	/* Set up the address and data */
-	regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
-	E1000_WRITE_REG(hw, reg, regvalue);
-
-	/* Poll the ready bit to see if the MDI read completed */
-	for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
-		usec_delay(5);
-		regvalue = E1000_READ_REG(hw, reg);
-		if (regvalue & E1000_GEN_CTL_READY)
-			break;
-	}
-	if (!(regvalue & E1000_GEN_CTL_READY)) {
-		DEBUGOUT1("Reg %08x did not indicate ready\n", reg);
-		return -E1000_ERR_PHY;
-	}
-
-	return E1000_SUCCESS;
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.h b/kernel/linux/kni/ethtool/igb/e1000_mac.h
deleted file mode 100644
index a3e784982..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_mac.h
+++ /dev/null
@@ -1,65 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_MAC_H_
-#define _E1000_MAC_H_
-
-void e1000_init_mac_ops_generic(struct e1000_hw *hw);
-void e1000_null_mac_generic(struct e1000_hw *hw);
-s32  e1000_null_ops_generic(struct e1000_hw *hw);
-s32  e1000_null_link_info(struct e1000_hw *hw, u16 *s, u16 *d);
-bool e1000_null_mng_mode(struct e1000_hw *hw);
-void e1000_null_update_mc(struct e1000_hw *hw, u8 *h, u32 a);
-void e1000_null_write_vfta(struct e1000_hw *hw, u32 a, u32 b);
-void e1000_null_rar_set(struct e1000_hw *hw, u8 *h, u32 a);
-s32  e1000_blink_led_generic(struct e1000_hw *hw);
-s32  e1000_check_for_copper_link_generic(struct e1000_hw *hw);
-s32  e1000_check_for_fiber_link_generic(struct e1000_hw *hw);
-s32  e1000_check_for_serdes_link_generic(struct e1000_hw *hw);
-s32  e1000_cleanup_led_generic(struct e1000_hw *hw);
-s32  e1000_config_fc_after_link_up_generic(struct e1000_hw *hw);
-s32  e1000_disable_pcie_master_generic(struct e1000_hw *hw);
-s32  e1000_force_mac_fc_generic(struct e1000_hw *hw);
-s32  e1000_get_auto_rd_done_generic(struct e1000_hw *hw);
-s32  e1000_get_bus_info_pcie_generic(struct e1000_hw *hw);
-void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-s32  e1000_get_hw_semaphore_generic(struct e1000_hw *hw);
-s32  e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed,
-					       u16 *duplex);
-s32  e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw,
-						     u16 *speed, u16 *duplex);
-s32  e1000_id_led_init_generic(struct e1000_hw *hw);
-s32  e1000_led_on_generic(struct e1000_hw *hw);
-s32  e1000_led_off_generic(struct e1000_hw *hw);
-void e1000_update_mc_addr_list_generic(struct e1000_hw *hw,
-				       u8 *mc_addr_list, u32 mc_addr_count);
-s32  e1000_set_fc_watermarks_generic(struct e1000_hw *hw);
-s32  e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw);
-s32  e1000_setup_led_generic(struct e1000_hw *hw);
-s32  e1000_setup_link_generic(struct e1000_hw *hw);
-s32  e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw);
-s32  e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg,
-				       u32 offset, u8 data);
-
-u32  e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr);
-
-void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw);
-void e1000_clear_vfta_generic(struct e1000_hw *hw);
-void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count);
-void e1000_put_hw_semaphore_generic(struct e1000_hw *hw);
-s32  e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
-void e1000_reset_adaptive_generic(struct e1000_hw *hw);
-void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop);
-void e1000_update_adaptive_generic(struct e1000_hw *hw);
-void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
-
-#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.c b/kernel/linux/kni/ethtool/igb/e1000_manage.c
deleted file mode 100644
index 2f75bc357..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_manage.c
+++ /dev/null
@@ -1,539 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_api.h"
-
-/**
- *  e1000_calculate_checksum - Calculate checksum for buffer
- *  @buffer: pointer to EEPROM
- *  @length: size of EEPROM to calculate a checksum for
- *
- *  Calculates the checksum for some buffer on a specified length.  The
- *  checksum calculated is returned.
- **/
-u8 e1000_calculate_checksum(u8 *buffer, u32 length)
-{
-	u32 i;
-	u8 sum = 0;
-
-	DEBUGFUNC("e1000_calculate_checksum");
-
-	if (!buffer)
-		return 0;
-
-	for (i = 0; i < length; i++)
-		sum += buffer[i];
-
-	return (u8) (0 - sum);
-}
-
-/**
- *  e1000_mng_enable_host_if_generic - Checks host interface is enabled
- *  @hw: pointer to the HW structure
- *
- *  Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
- *
- *  This function checks whether the HOST IF is enabled for command operation
- *  and also checks whether the previous command is completed.  It busy waits
- *  in case of previous command is not completed.
- **/
-s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw)
-{
-	u32 hicr;
-	u8 i;
-
-	DEBUGFUNC("e1000_mng_enable_host_if_generic");
-
-	if (!hw->mac.arc_subsystem_valid) {
-		DEBUGOUT("ARC subsystem not valid.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	/* Check that the host interface is enabled. */
-	hicr = E1000_READ_REG(hw, E1000_HICR);
-	if (!(hicr & E1000_HICR_EN)) {
-		DEBUGOUT("E1000_HOST_EN bit disabled.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-	/* check the previous command is completed */
-	for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
-		hicr = E1000_READ_REG(hw, E1000_HICR);
-		if (!(hicr & E1000_HICR_C))
-			break;
-		msec_delay_irq(1);
-	}
-
-	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-		DEBUGOUT("Previous command timeout failed .\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_check_mng_mode_generic - Generic check management mode
- *  @hw: pointer to the HW structure
- *
- *  Reads the firmware semaphore register and returns true (>0) if
- *  manageability is enabled, else false (0).
- **/
-bool e1000_check_mng_mode_generic(struct e1000_hw *hw)
-{
-	u32 fwsm = E1000_READ_REG(hw, E1000_FWSM);
-
-	DEBUGFUNC("e1000_check_mng_mode_generic");
-
-
-	return (fwsm & E1000_FWSM_MODE_MASK) ==
-		(E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
-}
-
-/**
- *  e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx
- *  @hw: pointer to the HW structure
- *
- *  Enables packet filtering on transmit packets if manageability is enabled
- *  and host interface is enabled.
- **/
-bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw)
-{
-	struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
-	u32 *buffer = (u32 *)&hw->mng_cookie;
-	u32 offset;
-	s32 ret_val, hdr_csum, csum;
-	u8 i, len;
-
-	DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic");
-
-	hw->mac.tx_pkt_filtering = true;
-
-	/* No manageability, no filtering */
-	if (!hw->mac.ops.check_mng_mode(hw)) {
-		hw->mac.tx_pkt_filtering = false;
-		return hw->mac.tx_pkt_filtering;
-	}
-
-	/* If we can't read from the host interface for whatever
-	 * reason, disable filtering.
-	 */
-	ret_val = e1000_mng_enable_host_if_generic(hw);
-	if (ret_val != E1000_SUCCESS) {
-		hw->mac.tx_pkt_filtering = false;
-		return hw->mac.tx_pkt_filtering;
-	}
-
-	/* Read in the header.  Length and offset are in dwords. */
-	len    = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
-	offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
-	for (i = 0; i < len; i++)
-		*(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF,
-							   offset + i);
-	hdr_csum = hdr->checksum;
-	hdr->checksum = 0;
-	csum = e1000_calculate_checksum((u8 *)hdr,
-					E1000_MNG_DHCP_COOKIE_LENGTH);
-	/* If either the checksums or signature don't match, then
-	 * the cookie area isn't considered valid, in which case we
-	 * take the safe route of assuming Tx filtering is enabled.
-	 */
-	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
-		hw->mac.tx_pkt_filtering = true;
-		return hw->mac.tx_pkt_filtering;
-	}
-
-	/* Cookie area is valid, make the final check for filtering. */
-	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING))
-		hw->mac.tx_pkt_filtering = false;
-
-	return hw->mac.tx_pkt_filtering;
-}
-
-/**
- *  e1000_mng_write_cmd_header_generic - Writes manageability command header
- *  @hw: pointer to the HW structure
- *  @hdr: pointer to the host interface command header
- *
- *  Writes the command header after does the checksum calculation.
- **/
-s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
-				      struct e1000_host_mng_command_header *hdr)
-{
-	u16 i, length = sizeof(struct e1000_host_mng_command_header);
-
-	DEBUGFUNC("e1000_mng_write_cmd_header_generic");
-
-	/* Write the whole command header structure with new checksum. */
-
-	hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
-
-	length >>= 2;
-	/* Write the relevant command block into the ram area. */
-	for (i = 0; i < length; i++) {
-		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
-					    *((u32 *) hdr + i));
-		E1000_WRITE_FLUSH(hw);
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_mng_host_if_write_generic - Write to the manageability host interface
- *  @hw: pointer to the HW structure
- *  @buffer: pointer to the host interface buffer
- *  @length: size of the buffer
- *  @offset: location in the buffer to write to
- *  @sum: sum of the data (not checksum)
- *
- *  This function writes the buffer content at the offset given on the host if.
- *  It also does alignment considerations to do the writes in most efficient
- *  way.  Also fills up the sum of the buffer in *buffer parameter.
- **/
-s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
-				    u16 length, u16 offset, u8 *sum)
-{
-	u8 *tmp;
-	u8 *bufptr = buffer;
-	u32 data = 0;
-	u16 remaining, i, j, prev_bytes;
-
-	DEBUGFUNC("e1000_mng_host_if_write_generic");
-
-	/* sum = only sum of the data and it is not checksum */
-
-	if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
-		return -E1000_ERR_PARAM;
-
-	tmp = (u8 *)&data;
-	prev_bytes = offset & 0x3;
-	offset >>= 2;
-
-	if (prev_bytes) {
-		data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset);
-		for (j = prev_bytes; j < sizeof(u32); j++) {
-			*(tmp + j) = *bufptr++;
-			*sum += *(tmp + j);
-		}
-		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data);
-		length -= j - prev_bytes;
-		offset++;
-	}
-
-	remaining = length & 0x3;
-	length -= remaining;
-
-	/* Calculate length in DWORDs */
-	length >>= 2;
-
-	/* The device driver writes the relevant command block into the
-	 * ram area.
-	 */
-	for (i = 0; i < length; i++) {
-		for (j = 0; j < sizeof(u32); j++) {
-			*(tmp + j) = *bufptr++;
-			*sum += *(tmp + j);
-		}
-
-		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
-					    data);
-	}
-	if (remaining) {
-		for (j = 0; j < sizeof(u32); j++) {
-			if (j < remaining)
-				*(tmp + j) = *bufptr++;
-			else
-				*(tmp + j) = 0;
-
-			*sum += *(tmp + j);
-		}
-		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i,
-					    data);
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface
- *  @hw: pointer to the HW structure
- *  @buffer: pointer to the host interface
- *  @length: size of the buffer
- *
- *  Writes the DHCP information to the host interface.
- **/
-s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer,
-				      u16 length)
-{
-	struct e1000_host_mng_command_header hdr;
-	s32 ret_val;
-	u32 hicr;
-
-	DEBUGFUNC("e1000_mng_write_dhcp_info_generic");
-
-	hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
-	hdr.command_length = length;
-	hdr.reserved1 = 0;
-	hdr.reserved2 = 0;
-	hdr.checksum = 0;
-
-	/* Enable the host interface */
-	ret_val = e1000_mng_enable_host_if_generic(hw);
-	if (ret_val)
-		return ret_val;
-
-	/* Populate the host interface with the contents of "buffer". */
-	ret_val = e1000_mng_host_if_write_generic(hw, buffer, length,
-						  sizeof(hdr), &(hdr.checksum));
-	if (ret_val)
-		return ret_val;
-
-	/* Write the manageability command header */
-	ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr);
-	if (ret_val)
-		return ret_val;
-
-	/* Tell the ARC a new command is pending. */
-	hicr = E1000_READ_REG(hw, E1000_HICR);
-	E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_enable_mng_pass_thru - Check if management passthrough is needed
- *  @hw: pointer to the HW structure
- *
- *  Verifies the hardware needs to leave interface enabled so that frames can
- *  be directed to and from the management interface.
- **/
-bool e1000_enable_mng_pass_thru(struct e1000_hw *hw)
-{
-	u32 manc;
-	u32 fwsm, factps;
-
-	DEBUGFUNC("e1000_enable_mng_pass_thru");
-
-	if (!hw->mac.asf_firmware_present)
-		return false;
-
-	manc = E1000_READ_REG(hw, E1000_MANC);
-
-	if (!(manc & E1000_MANC_RCV_TCO_EN))
-		return false;
-
-	if (hw->mac.has_fwsm) {
-		fwsm = E1000_READ_REG(hw, E1000_FWSM);
-		factps = E1000_READ_REG(hw, E1000_FACTPS);
-
-		if (!(factps & E1000_FACTPS_MNGCG) &&
-		    ((fwsm & E1000_FWSM_MODE_MASK) ==
-		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)))
-			return true;
-	} else if ((manc & E1000_MANC_SMBUS_EN) &&
-		   !(manc & E1000_MANC_ASF_EN)) {
-		return true;
-	}
-
-	return false;
-}
-
-/**
- *  e1000_host_interface_command - Writes buffer to host interface
- *  @hw: pointer to the HW structure
- *  @buffer: contains a command to write
- *  @length: the byte length of the buffer, must be multiple of 4 bytes
- *
- *  Writes a buffer to the Host Interface.  Upon success, returns E1000_SUCCESS
- *  else returns E1000_ERR_HOST_INTERFACE_COMMAND.
- **/
-s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length)
-{
-	u32 hicr, i;
-
-	DEBUGFUNC("e1000_host_interface_command");
-
-	if (!(hw->mac.arc_subsystem_valid)) {
-		DEBUGOUT("Hardware doesn't support host interface command.\n");
-		return E1000_SUCCESS;
-	}
-
-	if (!hw->mac.asf_firmware_present) {
-		DEBUGOUT("Firmware is not present.\n");
-		return E1000_SUCCESS;
-	}
-
-	if (length == 0 || length & 0x3 ||
-	    length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) {
-		DEBUGOUT("Buffer length failure.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	/* Check that the host interface is enabled. */
-	hicr = E1000_READ_REG(hw, E1000_HICR);
-	if (!(hicr & E1000_HICR_EN)) {
-		DEBUGOUT("E1000_HOST_EN bit disabled.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	/* Calculate length in DWORDs */
-	length >>= 2;
-
-	/* The device driver writes the relevant command block
-	 * into the ram area.
-	 */
-	for (i = 0; i < length; i++)
-		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i,
-					    *((u32 *)buffer + i));
-
-	/* Setting this bit tells the ARC that a new command is pending. */
-	E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
-
-	for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
-		hicr = E1000_READ_REG(hw, E1000_HICR);
-		if (!(hicr & E1000_HICR_C))
-			break;
-		msec_delay(1);
-	}
-
-	/* Check command successful completion. */
-	if (i == E1000_HI_COMMAND_TIMEOUT ||
-	    (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) {
-		DEBUGOUT("Command has failed with no status valid.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	for (i = 0; i < length; i++)
-		*((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw,
-								  E1000_HOST_IF,
-								  i);
-
-	return E1000_SUCCESS;
-}
-/**
- *  e1000_load_firmware - Writes proxy FW code buffer to host interface
- *                        and execute.
- *  @hw: pointer to the HW structure
- *  @buffer: contains a firmware to write
- *  @length: the byte length of the buffer, must be multiple of 4 bytes
- *
- *  Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled
- *  in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND.
- **/
-s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length)
-{
-	u32 hicr, hibba, fwsm, icr, i;
-
-	DEBUGFUNC("e1000_load_firmware");
-
-	if (hw->mac.type < e1000_i210) {
-		DEBUGOUT("Hardware doesn't support loading FW by the driver\n");
-		return -E1000_ERR_CONFIG;
-	}
-
-	/* Check that the host interface is enabled. */
-	hicr = E1000_READ_REG(hw, E1000_HICR);
-	if (!(hicr & E1000_HICR_EN)) {
-		DEBUGOUT("E1000_HOST_EN bit disabled.\n");
-		return -E1000_ERR_CONFIG;
-	}
-	if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) {
-		DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n");
-		return -E1000_ERR_CONFIG;
-	}
-
-	if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) {
-		DEBUGOUT("Buffer length failure.\n");
-		return -E1000_ERR_INVALID_ARGUMENT;
-	}
-
-	/* Clear notification from ROM-FW by reading ICR register */
-	icr = E1000_READ_REG(hw, E1000_ICR_V2);
-
-	/* Reset ROM-FW */
-	hicr = E1000_READ_REG(hw, E1000_HICR);
-	hicr |= E1000_HICR_FW_RESET_ENABLE;
-	E1000_WRITE_REG(hw, E1000_HICR, hicr);
-	hicr |= E1000_HICR_FW_RESET;
-	E1000_WRITE_REG(hw, E1000_HICR, hicr);
-	E1000_WRITE_FLUSH(hw);
-
-	/* Wait till MAC notifies about its readiness after ROM-FW reset */
-	for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) {
-		icr = E1000_READ_REG(hw, E1000_ICR_V2);
-		if (icr & E1000_ICR_MNG)
-			break;
-		msec_delay(1);
-	}
-
-	/* Check for timeout */
-	if (i == E1000_HI_COMMAND_TIMEOUT) {
-		DEBUGOUT("FW reset failed.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	/* Wait till MAC is ready to accept new FW code */
-	for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
-		fwsm = E1000_READ_REG(hw, E1000_FWSM);
-		if ((fwsm & E1000_FWSM_FW_VALID) &&
-		    ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT ==
-		    E1000_FWSM_HI_EN_ONLY_MODE))
-			break;
-		msec_delay(1);
-	}
-
-	/* Check for timeout */
-	if (i == E1000_HI_COMMAND_TIMEOUT) {
-		DEBUGOUT("FW reset failed.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	/* Calculate length in DWORDs */
-	length >>= 2;
-
-	/* The device driver writes the relevant FW code block
-	 * into the ram area in DWORDs via 1kB ram addressing window.
-	 */
-	for (i = 0; i < length; i++) {
-		if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) {
-			/* Point to correct 1kB ram window */
-			hibba = E1000_HI_FW_BASE_ADDRESS +
-				((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) *
-				(i / E1000_HI_FW_BLOCK_DWORD_LENGTH));
-
-			E1000_WRITE_REG(hw, E1000_HIBBA, hibba);
-		}
-
-		E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF,
-					    i % E1000_HI_FW_BLOCK_DWORD_LENGTH,
-					    *((u32 *)buffer + i));
-	}
-
-	/* Setting this bit tells the ARC that a new FW is ready to execute. */
-	hicr = E1000_READ_REG(hw, E1000_HICR);
-	E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C);
-
-	for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) {
-		hicr = E1000_READ_REG(hw, E1000_HICR);
-		if (!(hicr & E1000_HICR_C))
-			break;
-		msec_delay(1);
-	}
-
-	/* Check for successful FW start. */
-	if (i == E1000_HI_COMMAND_TIMEOUT) {
-		DEBUGOUT("New FW did not start within timeout period.\n");
-		return -E1000_ERR_HOST_INTERFACE_COMMAND;
-	}
-
-	return E1000_SUCCESS;
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.h b/kernel/linux/kni/ethtool/igb/e1000_manage.h
deleted file mode 100644
index 9f27b9343..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_manage.h
+++ /dev/null
@@ -1,74 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_MANAGE_H_
-#define _E1000_MANAGE_H_
-
-bool e1000_check_mng_mode_generic(struct e1000_hw *hw);
-bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw);
-s32  e1000_mng_enable_host_if_generic(struct e1000_hw *hw);
-s32  e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer,
-				     u16 length, u16 offset, u8 *sum);
-s32  e1000_mng_write_cmd_header_generic(struct e1000_hw *hw,
-				     struct e1000_host_mng_command_header *hdr);
-s32  e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw,
-				       u8 *buffer, u16 length);
-bool e1000_enable_mng_pass_thru(struct e1000_hw *hw);
-u8 e1000_calculate_checksum(u8 *buffer, u32 length);
-s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length);
-s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length);
-
-enum e1000_mng_mode {
-	e1000_mng_mode_none = 0,
-	e1000_mng_mode_asf,
-	e1000_mng_mode_pt,
-	e1000_mng_mode_ipmi,
-	e1000_mng_mode_host_if_only
-};
-
-#define E1000_FACTPS_MNGCG			0x20000000
-
-#define E1000_FWSM_MODE_MASK			0xE
-#define E1000_FWSM_MODE_SHIFT			1
-#define E1000_FWSM_FW_VALID			0x00008000
-#define E1000_FWSM_HI_EN_ONLY_MODE		0x4
-
-#define E1000_MNG_IAMT_MODE			0x3
-#define E1000_MNG_DHCP_COOKIE_LENGTH		0x10
-#define E1000_MNG_DHCP_COOKIE_OFFSET		0x6F0
-#define E1000_MNG_DHCP_COMMAND_TIMEOUT		10
-#define E1000_MNG_DHCP_TX_PAYLOAD_CMD		64
-#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING	0x1
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN	0x2
-
-#define E1000_VFTA_ENTRY_SHIFT			5
-#define E1000_VFTA_ENTRY_MASK			0x7F
-#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK		0x1F
-
-#define E1000_HI_MAX_BLOCK_BYTE_LENGTH		1792 /* Num of bytes in range */
-#define E1000_HI_MAX_BLOCK_DWORD_LENGTH		448 /* Num of dwords in range */
-#define E1000_HI_COMMAND_TIMEOUT		500 /* Process HI cmd limit */
-#define E1000_HI_FW_BASE_ADDRESS		0x10000
-#define E1000_HI_FW_MAX_LENGTH			(64 * 1024) /* Num of bytes */
-#define E1000_HI_FW_BLOCK_DWORD_LENGTH		256 /* Num of DWORDs per page */
-#define E1000_HICR_MEMORY_BASE_EN		0x200 /* MB Enable bit - RO */
-#define E1000_HICR_EN			0x01  /* Enable bit - RO */
-/* Driver sets this bit when done to put command in RAM */
-#define E1000_HICR_C			0x02
-#define E1000_HICR_SV			0x04  /* Status Validity */
-#define E1000_HICR_FW_RESET_ENABLE	0x40
-#define E1000_HICR_FW_RESET		0x80
-
-/* Intel(R) Active Management Technology signature */
-#define E1000_IAMT_SIGNATURE		0x544D4149
-
-#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.c b/kernel/linux/kni/ethtool/igb/e1000_mbx.c
deleted file mode 100644
index 1be443491..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_mbx.c
+++ /dev/null
@@ -1,510 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_mbx.h"
-
-/**
- *  e1000_null_mbx_check_for_flag - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-static s32 e1000_null_mbx_check_for_flag(struct e1000_hw E1000_UNUSEDARG *hw,
-					 u16 E1000_UNUSEDARG mbx_id)
-{
-	DEBUGFUNC("e1000_null_mbx_check_flag");
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_mbx_transact - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-static s32 e1000_null_mbx_transact(struct e1000_hw E1000_UNUSEDARG *hw,
-				   u32 E1000_UNUSEDARG *msg,
-				   u16 E1000_UNUSEDARG size,
-				   u16 E1000_UNUSEDARG mbx_id)
-{
-	DEBUGFUNC("e1000_null_mbx_rw_msg");
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_mbx - Reads a message from the mailbox
- *  @hw: pointer to the HW structure
- *  @msg: The message buffer
- *  @size: Length of buffer
- *  @mbx_id: id of mailbox to read
- *
- *  returns SUCCESS if it successfully read message from buffer
- **/
-s32 e1000_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_read_mbx");
-
-	/* limit read to size of mailbox */
-	if (size > mbx->size)
-		size = mbx->size;
-
-	if (mbx->ops.read)
-		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
-
-	return ret_val;
-}
-
-/**
- *  e1000_write_mbx - Write a message to the mailbox
- *  @hw: pointer to the HW structure
- *  @msg: The message buffer
- *  @size: Length of buffer
- *  @mbx_id: id of mailbox to write
- *
- *  returns SUCCESS if it successfully copied message into the buffer
- **/
-s32 e1000_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_write_mbx");
-
-	if (size > mbx->size)
-		ret_val = -E1000_ERR_MBX;
-
-	else if (mbx->ops.write)
-		ret_val = mbx->ops.write(hw, msg, size, mbx_id);
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_msg - checks to see if someone sent us mail
- *  @hw: pointer to the HW structure
- *  @mbx_id: id of mailbox to check
- *
- *  returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 e1000_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_check_for_msg");
-
-	if (mbx->ops.check_for_msg)
-		ret_val = mbx->ops.check_for_msg(hw, mbx_id);
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_ack - checks to see if someone sent us ACK
- *  @hw: pointer to the HW structure
- *  @mbx_id: id of mailbox to check
- *
- *  returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 e1000_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_check_for_ack");
-
-	if (mbx->ops.check_for_ack)
-		ret_val = mbx->ops.check_for_ack(hw, mbx_id);
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_rst - checks to see if other side has reset
- *  @hw: pointer to the HW structure
- *  @mbx_id: id of mailbox to check
- *
- *  returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 e1000_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_check_for_rst");
-
-	if (mbx->ops.check_for_rst)
-		ret_val = mbx->ops.check_for_rst(hw, mbx_id);
-
-	return ret_val;
-}
-
-/**
- *  e1000_poll_for_msg - Wait for message notification
- *  @hw: pointer to the HW structure
- *  @mbx_id: id of mailbox to write
- *
- *  returns SUCCESS if it successfully received a message notification
- **/
-static s32 e1000_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	int countdown = mbx->timeout;
-
-	DEBUGFUNC("e1000_poll_for_msg");
-
-	if (!countdown || !mbx->ops.check_for_msg)
-		goto out;
-
-	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
-		countdown--;
-		if (!countdown)
-			break;
-		usec_delay(mbx->usec_delay);
-	}
-
-	/* if we failed, all future posted messages fail until reset */
-	if (!countdown)
-		mbx->timeout = 0;
-out:
-	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
-}
-
-/**
- *  e1000_poll_for_ack - Wait for message acknowledgement
- *  @hw: pointer to the HW structure
- *  @mbx_id: id of mailbox to write
- *
- *  returns SUCCESS if it successfully received a message acknowledgement
- **/
-static s32 e1000_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	int countdown = mbx->timeout;
-
-	DEBUGFUNC("e1000_poll_for_ack");
-
-	if (!countdown || !mbx->ops.check_for_ack)
-		goto out;
-
-	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
-		countdown--;
-		if (!countdown)
-			break;
-		usec_delay(mbx->usec_delay);
-	}
-
-	/* if we failed, all future posted messages fail until reset */
-	if (!countdown)
-		mbx->timeout = 0;
-out:
-	return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
-}
-
-/**
- *  e1000_read_posted_mbx - Wait for message notification and receive message
- *  @hw: pointer to the HW structure
- *  @msg: The message buffer
- *  @size: Length of buffer
- *  @mbx_id: id of mailbox to write
- *
- *  returns SUCCESS if it successfully received a message notification and
- *  copied it into the receive buffer.
- **/
-s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_read_posted_mbx");
-
-	if (!mbx->ops.read)
-		goto out;
-
-	ret_val = e1000_poll_for_msg(hw, mbx_id);
-
-	/* if ack received read message, otherwise we timed out */
-	if (!ret_val)
-		ret_val = mbx->ops.read(hw, msg, size, mbx_id);
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
- *  @hw: pointer to the HW structure
- *  @msg: The message buffer
- *  @size: Length of buffer
- *  @mbx_id: id of mailbox to write
- *
- *  returns SUCCESS if it successfully copied message into the buffer and
- *  received an ack to that message within delay * timeout period
- **/
-s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_write_posted_mbx");
-
-	/* exit if either we can't write or there isn't a defined timeout */
-	if (!mbx->ops.write || !mbx->timeout)
-		goto out;
-
-	/* send msg */
-	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
-
-	/* if msg sent wait until we receive an ack */
-	if (!ret_val)
-		ret_val = e1000_poll_for_ack(hw, mbx_id);
-out:
-	return ret_val;
-}
-
-/**
- *  e1000_init_mbx_ops_generic - Initialize mbx function pointers
- *  @hw: pointer to the HW structure
- *
- *  Sets the function pointers to no-op functions
- **/
-void e1000_init_mbx_ops_generic(struct e1000_hw *hw)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-	mbx->ops.init_params = e1000_null_ops_generic;
-	mbx->ops.read = e1000_null_mbx_transact;
-	mbx->ops.write = e1000_null_mbx_transact;
-	mbx->ops.check_for_msg = e1000_null_mbx_check_for_flag;
-	mbx->ops.check_for_ack = e1000_null_mbx_check_for_flag;
-	mbx->ops.check_for_rst = e1000_null_mbx_check_for_flag;
-	mbx->ops.read_posted = e1000_read_posted_mbx;
-	mbx->ops.write_posted = e1000_write_posted_mbx;
-}
-
-static s32 e1000_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
-{
-	u32 mbvficr = E1000_READ_REG(hw, E1000_MBVFICR);
-	s32 ret_val = -E1000_ERR_MBX;
-
-	if (mbvficr & mask) {
-		ret_val = E1000_SUCCESS;
-		E1000_WRITE_REG(hw, E1000_MBVFICR, mask);
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_msg_pf - checks to see if the VF has sent mail
- *  @hw: pointer to the HW structure
- *  @vf_number: the VF index
- *
- *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 e1000_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
-{
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_check_for_msg_pf");
-
-	if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
-		ret_val = E1000_SUCCESS;
-		hw->mbx.stats.reqs++;
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_ack_pf - checks to see if the VF has ACKed
- *  @hw: pointer to the HW structure
- *  @vf_number: the VF index
- *
- *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 e1000_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
-{
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_check_for_ack_pf");
-
-	if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
-		ret_val = E1000_SUCCESS;
-		hw->mbx.stats.acks++;
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_check_for_rst_pf - checks to see if the VF has reset
- *  @hw: pointer to the HW structure
- *  @vf_number: the VF index
- *
- *  returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
-{
-	u32 vflre = E1000_READ_REG(hw, E1000_VFLRE);
-	s32 ret_val = -E1000_ERR_MBX;
-
-	DEBUGFUNC("e1000_check_for_rst_pf");
-
-	if (vflre & (1 << vf_number)) {
-		ret_val = E1000_SUCCESS;
-		E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number));
-		hw->mbx.stats.rsts++;
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_obtain_mbx_lock_pf - obtain mailbox lock
- *  @hw: pointer to the HW structure
- *  @vf_number: the VF index
- *
- *  return SUCCESS if we obtained the mailbox lock
- **/
-static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
-{
-	s32 ret_val = -E1000_ERR_MBX;
-	u32 p2v_mailbox;
-
-	DEBUGFUNC("e1000_obtain_mbx_lock_pf");
-
-	/* Take ownership of the buffer */
-	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
-
-	/* reserve mailbox for vf use */
-	p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number));
-	if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
-		ret_val = E1000_SUCCESS;
-
-	return ret_val;
-}
-
-/**
- *  e1000_write_mbx_pf - Places a message in the mailbox
- *  @hw: pointer to the HW structure
- *  @msg: The message buffer
- *  @size: Length of buffer
- *  @vf_number: the VF index
- *
- *  returns SUCCESS if it successfully copied message into the buffer
- **/
-static s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
-			      u16 vf_number)
-{
-	s32 ret_val;
-	u16 i;
-
-	DEBUGFUNC("e1000_write_mbx_pf");
-
-	/* lock the mailbox to prevent pf/vf race condition */
-	ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number);
-	if (ret_val)
-		goto out_no_write;
-
-	/* flush msg and acks as we are overwriting the message buffer */
-	e1000_check_for_msg_pf(hw, vf_number);
-	e1000_check_for_ack_pf(hw, vf_number);
-
-	/* copy the caller specified message to the mailbox memory buffer */
-	for (i = 0; i < size; i++)
-		E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i, msg[i]);
-
-	/* Interrupt VF to tell it a message has been sent and release buffer*/
-	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
-
-	/* update stats */
-	hw->mbx.stats.msgs_tx++;
-
-out_no_write:
-	return ret_val;
-
-}
-
-/**
- *  e1000_read_mbx_pf - Read a message from the mailbox
- *  @hw: pointer to the HW structure
- *  @msg: The message buffer
- *  @size: Length of buffer
- *  @vf_number: the VF index
- *
- *  This function copies a message from the mailbox buffer to the caller's
- *  memory buffer.  The presumption is that the caller knows that there was
- *  a message due to a VF request so no polling for message is needed.
- **/
-static s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
-			     u16 vf_number)
-{
-	s32 ret_val;
-	u16 i;
-
-	DEBUGFUNC("e1000_read_mbx_pf");
-
-	/* lock the mailbox to prevent pf/vf race condition */
-	ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number);
-	if (ret_val)
-		goto out_no_read;
-
-	/* copy the message to the mailbox memory buffer */
-	for (i = 0; i < size; i++)
-		msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i);
-
-	/* Acknowledge the message and release buffer */
-	E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
-
-	/* update stats */
-	hw->mbx.stats.msgs_rx++;
-
-out_no_read:
-	return ret_val;
-}
-
-/**
- *  e1000_init_mbx_params_pf - set initial values for pf mailbox
- *  @hw: pointer to the HW structure
- *
- *  Initializes the hw->mbx struct to correct values for pf mailbox
- */
-s32 e1000_init_mbx_params_pf(struct e1000_hw *hw)
-{
-	struct e1000_mbx_info *mbx = &hw->mbx;
-
-	switch (hw->mac.type) {
-	case e1000_82576:
-	case e1000_i350:
-	case e1000_i354:
-		mbx->timeout = 0;
-		mbx->usec_delay = 0;
-
-		mbx->size = E1000_VFMAILBOX_SIZE;
-
-		mbx->ops.read = e1000_read_mbx_pf;
-		mbx->ops.write = e1000_write_mbx_pf;
-		mbx->ops.read_posted = e1000_read_posted_mbx;
-		mbx->ops.write_posted = e1000_write_posted_mbx;
-		mbx->ops.check_for_msg = e1000_check_for_msg_pf;
-		mbx->ops.check_for_ack = e1000_check_for_ack_pf;
-		mbx->ops.check_for_rst = e1000_check_for_rst_pf;
-
-		mbx->stats.msgs_tx = 0;
-		mbx->stats.msgs_rx = 0;
-		mbx->stats.reqs = 0;
-		mbx->stats.acks = 0;
-		mbx->stats.rsts = 0;
-	default:
-		return E1000_SUCCESS;
-	}
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.h b/kernel/linux/kni/ethtool/igb/e1000_mbx.h
deleted file mode 100644
index 5951f18fb..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_mbx.h
+++ /dev/null
@@ -1,72 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_MBX_H_
-#define _E1000_MBX_H_
-
-#include "e1000_api.h"
-
-#define E1000_P2VMAILBOX_STS	0x00000001 /* Initiate message send to VF */
-#define E1000_P2VMAILBOX_ACK	0x00000002 /* Ack message recv'd from VF */
-#define E1000_P2VMAILBOX_VFU	0x00000004 /* VF owns the mailbox buffer */
-#define E1000_P2VMAILBOX_PFU	0x00000008 /* PF owns the mailbox buffer */
-#define E1000_P2VMAILBOX_RVFU	0x00000010 /* Reset VFU - used when VF stuck */
-
-#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
-#define E1000_MBVFICR_VFREQ_VF1	0x00000001 /* bit for VF 1 message */
-#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
-#define E1000_MBVFICR_VFACK_VF1	0x00010000 /* bit for VF 1 ack */
-
-#define E1000_VFMAILBOX_SIZE	16 /* 16 32 bit words - 64 bytes */
-
-/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
- * PF.  The reverse is true if it is E1000_PF_*.
- * Message ACK's are the value or'd with 0xF0000000
- */
-/* Msgs below or'd with this are the ACK */
-#define E1000_VT_MSGTYPE_ACK	0x80000000
-/* Msgs below or'd with this are the NACK */
-#define E1000_VT_MSGTYPE_NACK	0x40000000
-/* Indicates that VF is still clear to send requests */
-#define E1000_VT_MSGTYPE_CTS	0x20000000
-#define E1000_VT_MSGINFO_SHIFT	16
-/* bits 23:16 are used for extra info for certain messages */
-#define E1000_VT_MSGINFO_MASK	(0xFF << E1000_VT_MSGINFO_SHIFT)
-
-#define E1000_VF_RESET			0x01 /* VF requests reset */
-#define E1000_VF_SET_MAC_ADDR		0x02 /* VF requests to set MAC addr */
-#define E1000_VF_SET_MULTICAST		0x03 /* VF requests to set MC addr */
-#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT)
-#define E1000_VF_SET_MULTICAST_OVERFLOW	(0x80 << E1000_VT_MSGINFO_SHIFT)
-#define E1000_VF_SET_VLAN		0x04 /* VF requests to set VLAN */
-#define E1000_VF_SET_VLAN_ADD		(0x01 << E1000_VT_MSGINFO_SHIFT)
-#define E1000_VF_SET_LPE		0x05 /* reqs to set VMOLR.LPE */
-#define E1000_VF_SET_PROMISC		0x06 /* reqs to clear VMOLR.ROPE/MPME*/
-#define E1000_VF_SET_PROMISC_UNICAST	(0x01 << E1000_VT_MSGINFO_SHIFT)
-#define E1000_VF_SET_PROMISC_MULTICAST	(0x02 << E1000_VT_MSGINFO_SHIFT)
-
-#define E1000_PF_CONTROL_MSG		0x0100 /* PF control message */
-
-#define E1000_VF_MBX_INIT_TIMEOUT	2000 /* number of retries on mailbox */
-#define E1000_VF_MBX_INIT_DELAY		500  /* microseconds between retries */
-
-s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 e1000_check_for_msg(struct e1000_hw *, u16);
-s32 e1000_check_for_ack(struct e1000_hw *, u16);
-s32 e1000_check_for_rst(struct e1000_hw *, u16);
-void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
-s32 e1000_init_mbx_params_pf(struct e1000_hw *);
-
-#endif /* _E1000_MBX_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.c b/kernel/linux/kni/ethtool/igb/e1000_nvm.c
deleted file mode 100644
index 78c3fc0ed..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_nvm.c
+++ /dev/null
@@ -1,950 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_api.h"
-
-static void e1000_reload_nvm_generic(struct e1000_hw *hw);
-
-/**
- *  e1000_init_nvm_ops_generic - Initialize NVM function pointers
- *  @hw: pointer to the HW structure
- *
- *  Setups up the function pointers to no-op functions
- **/
-void e1000_init_nvm_ops_generic(struct e1000_hw *hw)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	DEBUGFUNC("e1000_init_nvm_ops_generic");
-
-	/* Initialize function pointers */
-	nvm->ops.init_params = e1000_null_ops_generic;
-	nvm->ops.acquire = e1000_null_ops_generic;
-	nvm->ops.read = e1000_null_read_nvm;
-	nvm->ops.release = e1000_null_nvm_generic;
-	nvm->ops.reload = e1000_reload_nvm_generic;
-	nvm->ops.update = e1000_null_ops_generic;
-	nvm->ops.valid_led_default = e1000_null_led_default;
-	nvm->ops.validate = e1000_null_ops_generic;
-	nvm->ops.write = e1000_null_write_nvm;
-}
-
-/**
- *  e1000_null_nvm_read - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw,
-			u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b,
-			u16 E1000_UNUSEDARG *c)
-{
-	DEBUGFUNC("e1000_null_read_nvm");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_nvm_generic - No-op function, return void
- *  @hw: pointer to the HW structure
- **/
-void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw)
-{
-	DEBUGFUNC("e1000_null_nvm_generic");
-	return;
-}
-
-/**
- *  e1000_null_led_default - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw,
-			   u16 E1000_UNUSEDARG *data)
-{
-	DEBUGFUNC("e1000_null_led_default");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_write_nvm - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw,
-			 u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b,
-			 u16 E1000_UNUSEDARG *c)
-{
-	DEBUGFUNC("e1000_null_write_nvm");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_raise_eec_clk - Raise EEPROM clock
- *  @hw: pointer to the HW structure
- *  @eecd: pointer to the EEPROM
- *
- *  Enable/Raise the EEPROM clock bit.
- **/
-static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
-	*eecd = *eecd | E1000_EECD_SK;
-	E1000_WRITE_REG(hw, E1000_EECD, *eecd);
-	E1000_WRITE_FLUSH(hw);
-	usec_delay(hw->nvm.delay_usec);
-}
-
-/**
- *  e1000_lower_eec_clk - Lower EEPROM clock
- *  @hw: pointer to the HW structure
- *  @eecd: pointer to the EEPROM
- *
- *  Clear/Lower the EEPROM clock bit.
- **/
-static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
-	*eecd = *eecd & ~E1000_EECD_SK;
-	E1000_WRITE_REG(hw, E1000_EECD, *eecd);
-	E1000_WRITE_FLUSH(hw);
-	usec_delay(hw->nvm.delay_usec);
-}
-
-/**
- *  e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
- *  @hw: pointer to the HW structure
- *  @data: data to send to the EEPROM
- *  @count: number of bits to shift out
- *
- *  We need to shift 'count' bits out to the EEPROM.  So, the value in the
- *  "data" parameter will be shifted out to the EEPROM one bit at a time.
- *  In order to do this, "data" must be broken down into bits.
- **/
-static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-	u32 mask;
-
-	DEBUGFUNC("e1000_shift_out_eec_bits");
-
-	mask = 0x01 << (count - 1);
-	if (nvm->type == e1000_nvm_eeprom_spi)
-		eecd |= E1000_EECD_DO;
-
-	do {
-		eecd &= ~E1000_EECD_DI;
-
-		if (data & mask)
-			eecd |= E1000_EECD_DI;
-
-		E1000_WRITE_REG(hw, E1000_EECD, eecd);
-		E1000_WRITE_FLUSH(hw);
-
-		usec_delay(nvm->delay_usec);
-
-		e1000_raise_eec_clk(hw, &eecd);
-		e1000_lower_eec_clk(hw, &eecd);
-
-		mask >>= 1;
-	} while (mask);
-
-	eecd &= ~E1000_EECD_DI;
-	E1000_WRITE_REG(hw, E1000_EECD, eecd);
-}
-
-/**
- *  e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
- *  @hw: pointer to the HW structure
- *  @count: number of bits to shift in
- *
- *  In order to read a register from the EEPROM, we need to shift 'count' bits
- *  in from the EEPROM.  Bits are "shifted in" by raising the clock input to
- *  the EEPROM (setting the SK bit), and then reading the value of the data out
- *  "DO" bit.  During this "shifting in" process the data in "DI" bit should
- *  always be clear.
- **/
-static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
-{
-	u32 eecd;
-	u32 i;
-	u16 data;
-
-	DEBUGFUNC("e1000_shift_in_eec_bits");
-
-	eecd = E1000_READ_REG(hw, E1000_EECD);
-
-	eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
-	data = 0;
-
-	for (i = 0; i < count; i++) {
-		data <<= 1;
-		e1000_raise_eec_clk(hw, &eecd);
-
-		eecd = E1000_READ_REG(hw, E1000_EECD);
-
-		eecd &= ~E1000_EECD_DI;
-		if (eecd & E1000_EECD_DO)
-			data |= 1;
-
-		e1000_lower_eec_clk(hw, &eecd);
-	}
-
-	return data;
-}
-
-/**
- *  e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
- *  @hw: pointer to the HW structure
- *  @ee_reg: EEPROM flag for polling
- *
- *  Polls the EEPROM status bit for either read or write completion based
- *  upon the value of 'ee_reg'.
- **/
-s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
-{
-	u32 attempts = 100000;
-	u32 i, reg = 0;
-
-	DEBUGFUNC("e1000_poll_eerd_eewr_done");
-
-	for (i = 0; i < attempts; i++) {
-		if (ee_reg == E1000_NVM_POLL_READ)
-			reg = E1000_READ_REG(hw, E1000_EERD);
-		else
-			reg = E1000_READ_REG(hw, E1000_EEWR);
-
-		if (reg & E1000_NVM_RW_REG_DONE)
-			return E1000_SUCCESS;
-
-		usec_delay(5);
-	}
-
-	return -E1000_ERR_NVM;
-}
-
-/**
- *  e1000_acquire_nvm_generic - Generic request for access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Set the EEPROM access request bit and wait for EEPROM access grant bit.
- *  Return successful if access grant bit set, else clear the request for
- *  EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-s32 e1000_acquire_nvm_generic(struct e1000_hw *hw)
-{
-	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-	s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
-
-	DEBUGFUNC("e1000_acquire_nvm_generic");
-
-	E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ);
-	eecd = E1000_READ_REG(hw, E1000_EECD);
-
-	while (timeout) {
-		if (eecd & E1000_EECD_GNT)
-			break;
-		usec_delay(5);
-		eecd = E1000_READ_REG(hw, E1000_EECD);
-		timeout--;
-	}
-
-	if (!timeout) {
-		eecd &= ~E1000_EECD_REQ;
-		E1000_WRITE_REG(hw, E1000_EECD, eecd);
-		DEBUGOUT("Could not acquire NVM grant\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_standby_nvm - Return EEPROM to standby state
- *  @hw: pointer to the HW structure
- *
- *  Return the EEPROM to a standby state.
- **/
-static void e1000_standby_nvm(struct e1000_hw *hw)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-
-	DEBUGFUNC("e1000_standby_nvm");
-
-	if (nvm->type == e1000_nvm_eeprom_spi) {
-		/* Toggle CS to flush commands */
-		eecd |= E1000_EECD_CS;
-		E1000_WRITE_REG(hw, E1000_EECD, eecd);
-		E1000_WRITE_FLUSH(hw);
-		usec_delay(nvm->delay_usec);
-		eecd &= ~E1000_EECD_CS;
-		E1000_WRITE_REG(hw, E1000_EECD, eecd);
-		E1000_WRITE_FLUSH(hw);
-		usec_delay(nvm->delay_usec);
-	}
-}
-
-/**
- *  e1000_stop_nvm - Terminate EEPROM command
- *  @hw: pointer to the HW structure
- *
- *  Terminates the current command by inverting the EEPROM's chip select pin.
- **/
-static void e1000_stop_nvm(struct e1000_hw *hw)
-{
-	u32 eecd;
-
-	DEBUGFUNC("e1000_stop_nvm");
-
-	eecd = E1000_READ_REG(hw, E1000_EECD);
-	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
-		/* Pull CS high */
-		eecd |= E1000_EECD_CS;
-		e1000_lower_eec_clk(hw, &eecd);
-	}
-}
-
-/**
- *  e1000_release_nvm_generic - Release exclusive access to EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Stop any current commands to the EEPROM and clear the EEPROM request bit.
- **/
-void e1000_release_nvm_generic(struct e1000_hw *hw)
-{
-	u32 eecd;
-
-	DEBUGFUNC("e1000_release_nvm_generic");
-
-	e1000_stop_nvm(hw);
-
-	eecd = E1000_READ_REG(hw, E1000_EECD);
-	eecd &= ~E1000_EECD_REQ;
-	E1000_WRITE_REG(hw, E1000_EECD, eecd);
-}
-
-/**
- *  e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
- *  @hw: pointer to the HW structure
- *
- *  Setups the EEPROM for reading and writing.
- **/
-static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 eecd = E1000_READ_REG(hw, E1000_EECD);
-	u8 spi_stat_reg;
-
-	DEBUGFUNC("e1000_ready_nvm_eeprom");
-
-	if (nvm->type == e1000_nvm_eeprom_spi) {
-		u16 timeout = NVM_MAX_RETRY_SPI;
-
-		/* Clear SK and CS */
-		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-		E1000_WRITE_REG(hw, E1000_EECD, eecd);
-		E1000_WRITE_FLUSH(hw);
-		usec_delay(1);
-
-		/* Read "Status Register" repeatedly until the LSB is cleared.
-		 * The EEPROM will signal that the command has been completed
-		 * by clearing bit 0 of the internal status register.  If it's
-		 * not cleared within 'timeout', then error out.
-		 */
-		while (timeout) {
-			e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
-						 hw->nvm.opcode_bits);
-			spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
-			if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
-				break;
-
-			usec_delay(5);
-			e1000_standby_nvm(hw);
-			timeout--;
-		}
-
-		if (!timeout) {
-			DEBUGOUT("SPI NVM Status error\n");
-			return -E1000_ERR_NVM;
-		}
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_nvm_spi - Read EEPROM's using SPI
- *  @hw: pointer to the HW structure
- *  @offset: offset of word in the EEPROM to read
- *  @words: number of words to read
- *  @data: word read from the EEPROM
- *
- *  Reads a 16 bit word from the EEPROM.
- **/
-s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i = 0;
-	s32 ret_val;
-	u16 word_in;
-	u8 read_opcode = NVM_READ_OPCODE_SPI;
-
-	DEBUGFUNC("e1000_read_nvm_spi");
-
-	/* A check for invalid values:  offset too large, too many words,
-	 * and not enough words.
-	 */
-	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-	    (words == 0)) {
-		DEBUGOUT("nvm parameter(s) out of bounds\n");
-		return -E1000_ERR_NVM;
-	}
-
-	ret_val = nvm->ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = e1000_ready_nvm_eeprom(hw);
-	if (ret_val)
-		goto release;
-
-	e1000_standby_nvm(hw);
-
-	if ((nvm->address_bits == 8) && (offset >= 128))
-		read_opcode |= NVM_A8_OPCODE_SPI;
-
-	/* Send the READ command (opcode + addr) */
-	e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
-	e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
-
-	/* Read the data.  SPI NVMs increment the address with each byte
-	 * read and will roll over if reading beyond the end.  This allows
-	 * us to read the whole NVM from any offset
-	 */
-	for (i = 0; i < words; i++) {
-		word_in = e1000_shift_in_eec_bits(hw, 16);
-		data[i] = (word_in >> 8) | (word_in << 8);
-	}
-
-release:
-	nvm->ops.release(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_read_nvm_eerd - Reads EEPROM using EERD register
- *  @hw: pointer to the HW structure
- *  @offset: offset of word in the EEPROM to read
- *  @words: number of words to read
- *  @data: word read from the EEPROM
- *
- *  Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i, eerd = 0;
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_read_nvm_eerd");
-
-	/* A check for invalid values:  offset too large, too many words,
-	 * too many words for the offset, and not enough words.
-	 */
-	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-	    (words == 0)) {
-		DEBUGOUT("nvm parameter(s) out of bounds\n");
-		return -E1000_ERR_NVM;
-	}
-
-	for (i = 0; i < words; i++) {
-		eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
-		       E1000_NVM_RW_REG_START;
-
-		E1000_WRITE_REG(hw, E1000_EERD, eerd);
-		ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
-		if (ret_val)
-			break;
-
-		data[i] = (E1000_READ_REG(hw, E1000_EERD) >>
-			   E1000_NVM_RW_REG_DATA);
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_write_nvm_spi - Write to EEPROM using SPI
- *  @hw: pointer to the HW structure
- *  @offset: offset within the EEPROM to be written to
- *  @words: number of words to write
- *  @data: 16 bit word(s) to be written to the EEPROM
- *
- *  Writes data to EEPROM at offset using SPI interface.
- *
- *  If e1000_update_nvm_checksum is not called after this function , the
- *  EEPROM will most likely contain an invalid checksum.
- **/
-s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
-	struct e1000_nvm_info *nvm = &hw->nvm;
-	s32 ret_val = -E1000_ERR_NVM;
-	u16 widx = 0;
-
-	DEBUGFUNC("e1000_write_nvm_spi");
-
-	/* A check for invalid values:  offset too large, too many words,
-	 * and not enough words.
-	 */
-	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
-	    (words == 0)) {
-		DEBUGOUT("nvm parameter(s) out of bounds\n");
-		return -E1000_ERR_NVM;
-	}
-
-	while (widx < words) {
-		u8 write_opcode = NVM_WRITE_OPCODE_SPI;
-
-		ret_val = nvm->ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-
-		ret_val = e1000_ready_nvm_eeprom(hw);
-		if (ret_val) {
-			nvm->ops.release(hw);
-			return ret_val;
-		}
-
-		e1000_standby_nvm(hw);
-
-		/* Send the WRITE ENABLE command (8 bit opcode) */
-		e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
-					 nvm->opcode_bits);
-
-		e1000_standby_nvm(hw);
-
-		/* Some SPI eeproms use the 8th address bit embedded in the
-		 * opcode
-		 */
-		if ((nvm->address_bits == 8) && (offset >= 128))
-			write_opcode |= NVM_A8_OPCODE_SPI;
-
-		/* Send the Write command (8-bit opcode + addr) */
-		e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
-		e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
-					 nvm->address_bits);
-
-		/* Loop to allow for up to whole page write of eeprom */
-		while (widx < words) {
-			u16 word_out = data[widx];
-			word_out = (word_out >> 8) | (word_out << 8);
-			e1000_shift_out_eec_bits(hw, word_out, 16);
-			widx++;
-
-			if ((((offset + widx) * 2) % nvm->page_size) == 0) {
-				e1000_standby_nvm(hw);
-				break;
-			}
-		}
-		msec_delay(10);
-		nvm->ops.release(hw);
-	}
-
-	return ret_val;
-}
-
-/**
- *  e1000_read_pba_string_generic - Read device part number
- *  @hw: pointer to the HW structure
- *  @pba_num: pointer to device part number
- *  @pba_num_size: size of part number buffer
- *
- *  Reads the product board assembly (PBA) number from the EEPROM and stores
- *  the value in pba_num.
- **/
-s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
-				  u32 pba_num_size)
-{
-	s32 ret_val;
-	u16 nvm_data;
-	u16 pba_ptr;
-	u16 offset;
-	u16 length;
-
-	DEBUGFUNC("e1000_read_pba_string_generic");
-
-	if (pba_num == NULL) {
-		DEBUGOUT("PBA string buffer was null\n");
-		return -E1000_ERR_INVALID_ARGUMENT;
-	}
-
-	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	/* if nvm_data is not ptr guard the PBA must be in legacy format which
-	 * means pba_ptr is actually our second data word for the PBA number
-	 * and we can decode it into an ascii string
-	 */
-	if (nvm_data != NVM_PBA_PTR_GUARD) {
-		DEBUGOUT("NVM PBA number is not stored as string\n");
-
-		/* make sure callers buffer is big enough to store the PBA */
-		if (pba_num_size < E1000_PBANUM_LENGTH) {
-			DEBUGOUT("PBA string buffer too small\n");
-			return E1000_ERR_NO_SPACE;
-		}
-
-		/* extract hex string from data and pba_ptr */
-		pba_num[0] = (nvm_data >> 12) & 0xF;
-		pba_num[1] = (nvm_data >> 8) & 0xF;
-		pba_num[2] = (nvm_data >> 4) & 0xF;
-		pba_num[3] = nvm_data & 0xF;
-		pba_num[4] = (pba_ptr >> 12) & 0xF;
-		pba_num[5] = (pba_ptr >> 8) & 0xF;
-		pba_num[6] = '-';
-		pba_num[7] = 0;
-		pba_num[8] = (pba_ptr >> 4) & 0xF;
-		pba_num[9] = pba_ptr & 0xF;
-
-		/* put a null character on the end of our string */
-		pba_num[10] = '\0';
-
-		/* switch all the data but the '-' to hex char */
-		for (offset = 0; offset < 10; offset++) {
-			if (pba_num[offset] < 0xA)
-				pba_num[offset] += '0';
-			else if (pba_num[offset] < 0x10)
-				pba_num[offset] += 'A' - 0xA;
-		}
-
-		return E1000_SUCCESS;
-	}
-
-	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if (length == 0xFFFF || length == 0) {
-		DEBUGOUT("NVM PBA number section invalid length\n");
-		return -E1000_ERR_NVM_PBA_SECTION;
-	}
-	/* check if pba_num buffer is big enough */
-	if (pba_num_size < (((u32)length * 2) - 1)) {
-		DEBUGOUT("PBA string buffer too small\n");
-		return -E1000_ERR_NO_SPACE;
-	}
-
-	/* trim pba length from start of string */
-	pba_ptr++;
-	length--;
-
-	for (offset = 0; offset < length; offset++) {
-		ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Read Error\n");
-			return ret_val;
-		}
-		pba_num[offset * 2] = (u8)(nvm_data >> 8);
-		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
-	}
-	pba_num[offset * 2] = '\0';
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_pba_length_generic - Read device part number length
- *  @hw: pointer to the HW structure
- *  @pba_num_size: size of part number buffer
- *
- *  Reads the product board assembly (PBA) number length from the EEPROM and
- *  stores the value in pba_num_size.
- **/
-s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size)
-{
-	s32 ret_val;
-	u16 nvm_data;
-	u16 pba_ptr;
-	u16 length;
-
-	DEBUGFUNC("e1000_read_pba_length_generic");
-
-	if (pba_num_size == NULL) {
-		DEBUGOUT("PBA buffer size was null\n");
-		return -E1000_ERR_INVALID_ARGUMENT;
-	}
-
-	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	 /* if data is not ptr guard the PBA must be in legacy format */
-	if (nvm_data != NVM_PBA_PTR_GUARD) {
-		*pba_num_size = E1000_PBANUM_LENGTH;
-		return E1000_SUCCESS;
-	}
-
-	ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length);
-	if (ret_val) {
-		DEBUGOUT("NVM Read Error\n");
-		return ret_val;
-	}
-
-	if (length == 0xFFFF || length == 0) {
-		DEBUGOUT("NVM PBA number section invalid length\n");
-		return -E1000_ERR_NVM_PBA_SECTION;
-	}
-
-	/* Convert from length in u16 values to u8 chars, add 1 for NULL,
-	 * and subtract 2 because length field is included in length.
-	 */
-	*pba_num_size = ((u32)length * 2) - 1;
-
-	return E1000_SUCCESS;
-}
-
-
-
-
-
-/**
- *  e1000_read_mac_addr_generic - Read device MAC address
- *  @hw: pointer to the HW structure
- *
- *  Reads the device MAC address from the EEPROM and stores the value.
- *  Since devices with two ports use the same EEPROM, we increment the
- *  last bit in the MAC address for the second port.
- **/
-s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
-{
-	u32 rar_high;
-	u32 rar_low;
-	u16 i;
-
-	rar_high = E1000_READ_REG(hw, E1000_RAH(0));
-	rar_low = E1000_READ_REG(hw, E1000_RAL(0));
-
-	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
-		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
-
-	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
-		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
-
-	for (i = 0; i < ETH_ADDR_LEN; i++)
-		hw->mac.addr[i] = hw->mac.perm_addr[i];
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_validate_nvm_checksum_generic - Validate EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- *  and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	DEBUGFUNC("e1000_validate_nvm_checksum_generic");
-
-	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
-		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Read Error\n");
-			return ret_val;
-		}
-		checksum += nvm_data;
-	}
-
-	if (checksum != (u16) NVM_SUM) {
-		DEBUGOUT("NVM Checksum Invalid\n");
-		return -E1000_ERR_NVM;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_update_nvm_checksum_generic - Update EEPROM checksum
- *  @hw: pointer to the HW structure
- *
- *  Updates the EEPROM checksum by reading/adding each word of the EEPROM
- *  up to the checksum.  Then calculates the EEPROM checksum and writes the
- *  value to the EEPROM.
- **/
-s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 checksum = 0;
-	u16 i, nvm_data;
-
-	DEBUGFUNC("e1000_update_nvm_checksum");
-
-	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
-		ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
-		if (ret_val) {
-			DEBUGOUT("NVM Read Error while updating checksum.\n");
-			return ret_val;
-		}
-		checksum += nvm_data;
-	}
-	checksum = (u16) NVM_SUM - checksum;
-	ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
-	if (ret_val)
-		DEBUGOUT("NVM Write Error while updating checksum.\n");
-
-	return ret_val;
-}
-
-/**
- *  e1000_reload_nvm_generic - Reloads EEPROM
- *  @hw: pointer to the HW structure
- *
- *  Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
- *  extended control register.
- **/
-static void e1000_reload_nvm_generic(struct e1000_hw *hw)
-{
-	u32 ctrl_ext;
-
-	DEBUGFUNC("e1000_reload_nvm_generic");
-
-	usec_delay(10);
-	ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
-	ctrl_ext |= E1000_CTRL_EXT_EE_RST;
-	E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
-	E1000_WRITE_FLUSH(hw);
-}
-
-/**
- *  e1000_get_fw_version - Get firmware version information
- *  @hw: pointer to the HW structure
- *  @fw_vers: pointer to output version structure
- *
- *  unsupported/not present features return 0 in version structure
- **/
-void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers)
-{
-	u16 eeprom_verh, eeprom_verl, etrack_test, fw_version;
-	u8 q, hval, rem, result;
-	u16 comb_verh, comb_verl, comb_offset;
-
-	memset(fw_vers, 0, sizeof(struct e1000_fw_version));
-
-	/* basic eeprom version numbers, bits used vary by part and by tool
-	 * used to create the nvm images */
-	/* Check which data format we have */
-	hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test);
-	switch (hw->mac.type) {
-	case e1000_i211:
-		e1000_read_invm_version(hw, fw_vers);
-		return;
-	case e1000_82575:
-	case e1000_82576:
-	case e1000_82580:
-		/* Use this format, unless EETRACK ID exists,
-		 * then use alternate format
-		 */
-		if ((etrack_test &  NVM_MAJOR_MASK) != NVM_ETRACK_VALID) {
-			hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
-			fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
-					      >> NVM_MAJOR_SHIFT;
-			fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK)
-					      >> NVM_MINOR_SHIFT;
-			fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK);
-			goto etrack_id;
-		}
-		break;
-	case e1000_i210:
-		if (!(e1000_get_flash_presence_i210(hw))) {
-			e1000_read_invm_version(hw, fw_vers);
-			return;
-		}
-		/* fall through */
-	case e1000_i350:
-	case e1000_i354:
-		/* find combo image version */
-		hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset);
-		if ((comb_offset != 0x0) &&
-		    (comb_offset != NVM_VER_INVALID)) {
-
-			hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset
-					 + 1), 1, &comb_verh);
-			hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset),
-					 1, &comb_verl);
-
-			/* get Option Rom version if it exists and is valid */
-			if ((comb_verh && comb_verl) &&
-			    ((comb_verh != NVM_VER_INVALID) &&
-			     (comb_verl != NVM_VER_INVALID))) {
-
-				fw_vers->or_valid = true;
-				fw_vers->or_major =
-					comb_verl >> NVM_COMB_VER_SHFT;
-				fw_vers->or_build =
-					(comb_verl << NVM_COMB_VER_SHFT)
-					| (comb_verh >> NVM_COMB_VER_SHFT);
-				fw_vers->or_patch =
-					comb_verh & NVM_COMB_VER_MASK;
-			}
-		}
-		break;
-	default:
-		return;
-	}
-	hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version);
-	fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK)
-			      >> NVM_MAJOR_SHIFT;
-
-	/* check for old style version format in newer images*/
-	if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) {
-		eeprom_verl = (fw_version & NVM_COMB_VER_MASK);
-	} else {
-		eeprom_verl = (fw_version & NVM_MINOR_MASK)
-				>> NVM_MINOR_SHIFT;
-	}
-	/* Convert minor value to hex before assigning to output struct
-	 * Val to be converted will not be higher than 99, per tool output
-	 */
-	q = eeprom_verl / NVM_HEX_CONV;
-	hval = q * NVM_HEX_TENS;
-	rem = eeprom_verl % NVM_HEX_CONV;
-	result = hval + rem;
-	fw_vers->eep_minor = result;
-
-etrack_id:
-	if ((etrack_test &  NVM_MAJOR_MASK) == NVM_ETRACK_VALID) {
-		hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl);
-		hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh);
-		fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT)
-			| eeprom_verl;
-	}
-	return;
-}
diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.h b/kernel/linux/kni/ethtool/igb/e1000_nvm.h
deleted file mode 100644
index e27b1c0ad..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_nvm.h
+++ /dev/null
@@ -1,60 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_NVM_H_
-#define _E1000_NVM_H_
-
-
-struct e1000_fw_version {
-	u32 etrack_id;
-	u16 eep_major;
-	u16 eep_minor;
-	u16 eep_build;
-
-	u8 invm_major;
-	u8 invm_minor;
-	u8 invm_img_type;
-
-	bool or_valid;
-	u16 or_major;
-	u16 or_build;
-	u16 or_patch;
-};
-
-
-void e1000_init_nvm_ops_generic(struct e1000_hw *hw);
-s32  e1000_null_read_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c);
-void e1000_null_nvm_generic(struct e1000_hw *hw);
-s32  e1000_null_led_default(struct e1000_hw *hw, u16 *data);
-s32  e1000_null_write_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c);
-s32  e1000_acquire_nvm_generic(struct e1000_hw *hw);
-
-s32  e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-s32  e1000_read_mac_addr_generic(struct e1000_hw *hw);
-s32  e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
-				   u32 pba_num_size);
-s32  e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size);
-s32  e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-s32  e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words,
-			 u16 *data);
-s32  e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data);
-s32  e1000_validate_nvm_checksum_generic(struct e1000_hw *hw);
-s32  e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words,
-			 u16 *data);
-s32  e1000_update_nvm_checksum_generic(struct e1000_hw *hw);
-void e1000_release_nvm_generic(struct e1000_hw *hw);
-void e1000_get_fw_version(struct e1000_hw *hw,
-			  struct e1000_fw_version *fw_vers);
-
-#define E1000_STM_OPCODE	0xDB00
-
-#endif
diff --git a/kernel/linux/kni/ethtool/igb/e1000_osdep.h b/kernel/linux/kni/ethtool/igb/e1000_osdep.h
deleted file mode 100644
index 3228100e5..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_osdep.h
+++ /dev/null
@@ -1,121 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-/* glue for the OS independent part of e1000
- * includes register access macros
- */
-
-#ifndef _E1000_OSDEP_H_
-#define _E1000_OSDEP_H_
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/sched.h>
-#include "kcompat.h"
-
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-#define usec_delay(x) udelay(x)
-#define usec_delay_irq(x) udelay(x)
-#ifndef msec_delay
-#define msec_delay(x) do { \
-	/* Don't mdelay in interrupt context! */ \
-	if (in_interrupt()) \
-		BUG(); \
-	else \
-		msleep(x); \
-} while (0)
-
-/* Some workarounds require millisecond delays and are run during interrupt
- * context.  Most notably, when establishing link, the phy may need tweaking
- * but cannot process phy register reads/writes faster than millisecond
- * intervals...and we establish link due to a "link status change" interrupt.
- */
-#define msec_delay_irq(x) mdelay(x)
-#endif
-
-#define PCI_COMMAND_REGISTER   PCI_COMMAND
-#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE
-#define ETH_ADDR_LEN           ETH_ALEN
-
-#ifdef __BIG_ENDIAN
-#define E1000_BIG_ENDIAN __BIG_ENDIAN
-#endif
-
-
-#ifdef DEBUG
-#define DEBUGOUT(S) printk(KERN_DEBUG S)
-#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A)
-#else
-#define DEBUGOUT(S)
-#define DEBUGOUT1(S, A...)
-#endif
-
-#ifdef DEBUG_FUNC
-#define DEBUGFUNC(F) DEBUGOUT(F "\n")
-#else
-#define DEBUGFUNC(F)
-#endif
-#define DEBUGOUT2 DEBUGOUT1
-#define DEBUGOUT3 DEBUGOUT2
-#define DEBUGOUT7 DEBUGOUT3
-
-#define E1000_REGISTER(a, reg) reg
-
-#define E1000_WRITE_REG(a, reg, value) ( \
-    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg))))
-
-#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg)))
-
-#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
-    writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))))
-
-#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
-    readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))
-
-#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
-#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
-
-#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
-    writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))))
-
-#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
-    readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))
-
-#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
-    writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))))
-
-#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
-    readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))
-
-#define E1000_WRITE_REG_IO(a, reg, offset) do { \
-    outl(reg, ((a)->io_base));                  \
-    outl(offset, ((a)->io_base + 4));      } while (0)
-
-#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS)
-
-#define E1000_WRITE_FLASH_REG(a, reg, value) ( \
-    writel((value), ((a)->flash_address + reg)))
-
-#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \
-    writew((value), ((a)->flash_address + reg)))
-
-#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg))
-
-#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg))
-
-#endif /* _E1000_OSDEP_H_ */
diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.c b/kernel/linux/kni/ethtool/igb/e1000_phy.c
deleted file mode 100644
index 1934a309c..000000000
--- a/kernel/linux/kni/ethtool/igb/e1000_phy.c
+++ /dev/null
@@ -1,3392 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0
-/*******************************************************************************
-
-  Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
-
-  Contact Information:
-  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_api.h"
-
-static s32 e1000_wait_autoneg(struct e1000_hw *hw);
-/* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] = {
-	0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
-#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
-		(sizeof(e1000_m88_cable_length_table) / \
-		 sizeof(e1000_m88_cable_length_table[0]))
-
-static const u16 e1000_igp_2_cable_length_table[] = {
-	0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
-	6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
-	26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
-	44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
-	66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
-	87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
-	100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
-	124};
-#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
-		(sizeof(e1000_igp_2_cable_length_table) / \
-		 sizeof(e1000_igp_2_cable_length_table[0]))
-
-/**
- *  e1000_init_phy_ops_generic - Initialize PHY function pointers
- *  @hw: pointer to the HW structure
- *
- *  Setups up the function pointers to no-op functions
- **/
-void e1000_init_phy_ops_generic(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	DEBUGFUNC("e1000_init_phy_ops_generic");
-
-	/* Initialize function pointers */
-	phy->ops.init_params = e1000_null_ops_generic;
-	phy->ops.acquire = e1000_null_ops_generic;
-	phy->ops.check_polarity = e1000_null_ops_generic;
-	phy->ops.check_reset_block = e1000_null_ops_generic;
-	phy->ops.commit = e1000_null_ops_generic;
-	phy->ops.force_speed_duplex = e1000_null_ops_generic;
-	phy->ops.get_cfg_done = e1000_null_ops_generic;
-	phy->ops.get_cable_length = e1000_null_ops_generic;
-	phy->ops.get_info = e1000_null_ops_generic;
-	phy->ops.set_page = e1000_null_set_page;
-	phy->ops.read_reg = e1000_null_read_reg;
-	phy->ops.read_reg_locked = e1000_null_read_reg;
-	phy->ops.read_reg_page = e1000_null_read_reg;
-	phy->ops.release = e1000_null_phy_generic;
-	phy->ops.reset = e1000_null_ops_generic;
-	phy->ops.set_d0_lplu_state = e1000_null_lplu_state;
-	phy->ops.set_d3_lplu_state = e1000_null_lplu_state;
-	phy->ops.write_reg = e1000_null_write_reg;
-	phy->ops.write_reg_locked = e1000_null_write_reg;
-	phy->ops.write_reg_page = e1000_null_write_reg;
-	phy->ops.power_up = e1000_null_phy_generic;
-	phy->ops.power_down = e1000_null_phy_generic;
-	phy->ops.read_i2c_byte = e1000_read_i2c_byte_null;
-	phy->ops.write_i2c_byte = e1000_write_i2c_byte_null;
-}
-
-/**
- *  e1000_null_set_page - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw,
-			u16 E1000_UNUSEDARG data)
-{
-	DEBUGFUNC("e1000_null_set_page");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_read_reg - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw,
-			u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data)
-{
-	DEBUGFUNC("e1000_null_read_reg");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_phy_generic - No-op function, return void
- *  @hw: pointer to the HW structure
- **/
-void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw)
-{
-	DEBUGFUNC("e1000_null_phy_generic");
-	return;
-}
-
-/**
- *  e1000_null_lplu_state - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw,
-			  bool E1000_UNUSEDARG active)
-{
-	DEBUGFUNC("e1000_null_lplu_state");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_null_write_reg - No-op function, return 0
- *  @hw: pointer to the HW structure
- **/
-s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw,
-			 u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data)
-{
-	DEBUGFUNC("e1000_null_write_reg");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_i2c_byte_null - No-op function, return 0
- *  @hw: pointer to hardware structure
- *  @byte_offset: byte offset to write
- *  @dev_addr: device address
- *  @data: data value read
- *
- **/
-s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw,
-			     u8 E1000_UNUSEDARG byte_offset,
-			     u8 E1000_UNUSEDARG dev_addr,
-			     u8 E1000_UNUSEDARG *data)
-{
-	DEBUGFUNC("e1000_read_i2c_byte_null");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_i2c_byte_null - No-op function, return 0
- *  @hw: pointer to hardware structure
- *  @byte_offset: byte offset to write
- *  @dev_addr: device address
- *  @data: data value to write
- *
- **/
-s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw,
-			      u8 E1000_UNUSEDARG byte_offset,
-			      u8 E1000_UNUSEDARG dev_addr,
-			      u8 E1000_UNUSEDARG data)
-{
-	DEBUGFUNC("e1000_write_i2c_byte_null");
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_check_reset_block_generic - Check if PHY reset is blocked
- *  @hw: pointer to the HW structure
- *
- *  Read the PHY management control register and check whether a PHY reset
- *  is blocked.  If a reset is not blocked return E1000_SUCCESS, otherwise
- *  return E1000_BLK_PHY_RESET (12).
- **/
-s32 e1000_check_reset_block_generic(struct e1000_hw *hw)
-{
-	u32 manc;
-
-	DEBUGFUNC("e1000_check_reset_block");
-
-	manc = E1000_READ_REG(hw, E1000_MANC);
-
-	return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
-	       E1000_BLK_PHY_RESET : E1000_SUCCESS;
-}
-
-/**
- *  e1000_get_phy_id - Retrieve the PHY ID and revision
- *  @hw: pointer to the HW structure
- *
- *  Reads the PHY registers and stores the PHY ID and possibly the PHY
- *  revision in the hardware structure.
- **/
-s32 e1000_get_phy_id(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val = E1000_SUCCESS;
-	u16 phy_id;
-
-	DEBUGFUNC("e1000_get_phy_id");
-
-	if (!phy->ops.read_reg)
-		return E1000_SUCCESS;
-
-	ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
-	if (ret_val)
-		return ret_val;
-
-	phy->id = (u32)(phy_id << 16);
-	usec_delay(20);
-	ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
-	if (ret_val)
-		return ret_val;
-
-	phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
-	phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
-
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_phy_reset_dsp_generic - Reset PHY DSP
- *  @hw: pointer to the HW structure
- *
- *  Reset the digital signal processor.
- **/
-s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_phy_reset_dsp_generic");
-
-	if (!hw->phy.ops.write_reg)
-		return E1000_SUCCESS;
-
-	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
-	if (ret_val)
-		return ret_val;
-
-	return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
-}
-
-/**
- *  e1000_read_phy_reg_mdic - Read MDI control register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Reads the MDI control register in the PHY at offset and stores the
- *  information read to data.
- **/
-s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, mdic = 0;
-
-	DEBUGFUNC("e1000_read_phy_reg_mdic");
-
-	if (offset > MAX_PHY_REG_ADDRESS) {
-		DEBUGOUT1("PHY Address %d is out of range\n", offset);
-		return -E1000_ERR_PARAM;
-	}
-
-	/* Set up Op-code, Phy Address, and register offset in the MDI
-	 * Control register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	mdic = ((offset << E1000_MDIC_REG_SHIFT) |
-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
-		(E1000_MDIC_OP_READ));
-
-	E1000_WRITE_REG(hw, E1000_MDIC, mdic);
-
-	/* Poll the ready bit to see if the MDI read completed
-	 * Increasing the time out as testing showed failures with
-	 * the lower time out
-	 */
-	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		usec_delay_irq(50);
-		mdic = E1000_READ_REG(hw, E1000_MDIC);
-		if (mdic & E1000_MDIC_READY)
-			break;
-	}
-	if (!(mdic & E1000_MDIC_READY)) {
-		DEBUGOUT("MDI Read did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (mdic & E1000_MDIC_ERROR) {
-		DEBUGOUT("MDI Error\n");
-		return -E1000_ERR_PHY;
-	}
-	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
-		DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n",
-			  offset,
-			  (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
-		return -E1000_ERR_PHY;
-	}
-	*data = (u16) mdic;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_phy_reg_mdic - Write MDI control register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write to register at offset
- *
- *  Writes data to MDI control register in the PHY at offset.
- **/
-s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, mdic = 0;
-
-	DEBUGFUNC("e1000_write_phy_reg_mdic");
-
-	if (offset > MAX_PHY_REG_ADDRESS) {
-		DEBUGOUT1("PHY Address %d is out of range\n", offset);
-		return -E1000_ERR_PARAM;
-	}
-
-	/* Set up Op-code, Phy Address, and register offset in the MDI
-	 * Control register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	mdic = (((u32)data) |
-		(offset << E1000_MDIC_REG_SHIFT) |
-		(phy->addr << E1000_MDIC_PHY_SHIFT) |
-		(E1000_MDIC_OP_WRITE));
-
-	E1000_WRITE_REG(hw, E1000_MDIC, mdic);
-
-	/* Poll the ready bit to see if the MDI read completed
-	 * Increasing the time out as testing showed failures with
-	 * the lower time out
-	 */
-	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		usec_delay_irq(50);
-		mdic = E1000_READ_REG(hw, E1000_MDIC);
-		if (mdic & E1000_MDIC_READY)
-			break;
-	}
-	if (!(mdic & E1000_MDIC_READY)) {
-		DEBUGOUT("MDI Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (mdic & E1000_MDIC_ERROR) {
-		DEBUGOUT("MDI Error\n");
-		return -E1000_ERR_PHY;
-	}
-	if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) {
-		DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n",
-			  offset,
-			  (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT);
-		return -E1000_ERR_PHY;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_phy_reg_i2c - Read PHY register using i2c
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Reads the PHY register at offset using the i2c interface and stores the
- *  retrieved information in data.
- **/
-s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, i2ccmd = 0;
-
-	DEBUGFUNC("e1000_read_phy_reg_i2c");
-
-	/* Set up Op-code, Phy Address, and register address in the I2CCMD
-	 * register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
-		  (E1000_I2CCMD_OPCODE_READ));
-
-	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
-
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		usec_delay(50);
-		i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		DEBUGOUT("I2CCMD Read did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		DEBUGOUT("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-
-	/* Need to byte-swap the 16-bit value. */
-	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_phy_reg_i2c - Write PHY register using i2c
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Writes the data to PHY register at the offset using the i2c interface.
- **/
-s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, i2ccmd = 0;
-	u16 phy_data_swapped;
-
-	DEBUGFUNC("e1000_write_phy_reg_i2c");
-
-	/* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/
-	if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) {
-		DEBUGOUT1("PHY I2C Address %d is out of range.\n",
-			  hw->phy.addr);
-		return -E1000_ERR_CONFIG;
-	}
-
-	/* Swap the data bytes for the I2C interface */
-	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
-
-	/* Set up Op-code, Phy Address, and register address in the I2CCMD
-	 * register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_WRITE |
-		  phy_data_swapped);
-
-	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
-
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		usec_delay(50);
-		i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		DEBUGOUT("I2CCMD Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		DEBUGOUT("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_sfp_data_byte - Reads SFP module data.
- *  @hw: pointer to the HW structure
- *  @offset: byte location offset to be read
- *  @data: read data buffer pointer
- *
- *  Reads one byte from SFP module data stored
- *  in SFP resided EEPROM memory or SFP diagnostic area.
- *  Function should be called with
- *  E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
- *  E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
- *  access
- **/
-s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
-{
-	u32 i = 0;
-	u32 i2ccmd = 0;
-	u32 data_local = 0;
-
-	DEBUGFUNC("e1000_read_sfp_data_byte");
-
-	if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
-		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
-		return -E1000_ERR_PHY;
-	}
-
-	/* Set up Op-code, EEPROM Address,in the I2CCMD
-	 * register. The MAC will take care of interfacing with the
-	 * EEPROM to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_READ);
-
-	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
-
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		usec_delay(50);
-		data_local = E1000_READ_REG(hw, E1000_I2CCMD);
-		if (data_local & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(data_local & E1000_I2CCMD_READY)) {
-		DEBUGOUT("I2CCMD Read did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (data_local & E1000_I2CCMD_ERROR) {
-		DEBUGOUT("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-	*data = (u8) data_local & 0xFF;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_sfp_data_byte - Writes SFP module data.
- *  @hw: pointer to the HW structure
- *  @offset: byte location offset to write to
- *  @data: data to write
- *
- *  Writes one byte to SFP module data stored
- *  in SFP resided EEPROM memory or SFP diagnostic area.
- *  Function should be called with
- *  E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
- *  E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
- *  access
- **/
-s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data)
-{
-	u32 i = 0;
-	u32 i2ccmd = 0;
-	u32 data_local = 0;
-
-	DEBUGFUNC("e1000_write_sfp_data_byte");
-
-	if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
-		DEBUGOUT("I2CCMD command address exceeds upper limit\n");
-		return -E1000_ERR_PHY;
-	}
-	/* The programming interface is 16 bits wide
-	 * so we need to read the whole word first
-	 * then update appropriate byte lane and write
-	 * the updated word back.
-	 */
-	/* Set up Op-code, EEPROM Address,in the I2CCMD
-	 * register. The MAC will take care of interfacing
-	 * with an EEPROM to write the data given.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_READ);
-	/* Set a command to read single word */
-	E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		usec_delay(50);
-		/* Poll the ready bit to see if lastly
-		 * launched I2C operation completed
-		 */
-		i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY) {
-			/* Check if this is READ or WRITE phase */
-			if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) ==
-			    E1000_I2CCMD_OPCODE_READ) {
-				/* Write the selected byte
-				 * lane and update whole word
-				 */
-				data_local = i2ccmd & 0xFF00;
-				data_local |= data;
-				i2ccmd = ((offset <<
-					E1000_I2CCMD_REG_ADDR_SHIFT) |
-					E1000_I2CCMD_OPCODE_WRITE | data_local);
-				E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd);
-			} else {
-				break;
-			}
-		}
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		DEBUGOUT("I2CCMD Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		DEBUGOUT("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_phy_reg_m88 - Read m88 PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Acquires semaphore, if necessary, then reads the PHY register at offset
- *  and storing the retrieved information in data.  Release any acquired
- *  semaphores before exiting.
- **/
-s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_read_phy_reg_m88");
-
-	if (!hw->phy.ops.acquire)
-		return E1000_SUCCESS;
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-					  data);
-
-	hw->phy.ops.release(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_write_phy_reg_m88 - Write m88 PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Acquires semaphore, if necessary, then writes the data to PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	s32 ret_val;
-
-	DEBUGFUNC("e1000_write_phy_reg_m88");
-
-	if (!hw->phy.ops.acquire)
-		return E1000_SUCCESS;
-
-	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val)
-		return ret_val;
-
-	ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
-					   data);
-
-	hw->phy.ops.release(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_set_page_igp - Set page as on IGP-like PHY(s)
- *  @hw: pointer to the HW structure
- *  @page: page to set (shifted left when necessary)
- *
- *  Sets PHY page required for PHY register access.  Assumes semaphore is
- *  already acquired.  Note, this function sets phy.addr to 1 so the caller
- *  must set it appropriately (if necessary) after this function returns.
- **/
-s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
-{
-	DEBUGFUNC("e1000_set_page_igp");
-
-	DEBUGOUT1("Setting page 0x%x\n", page);
-
-	hw->phy.addr = 1;
-
-	return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
-}
-
-/**
- *  __e1000_read_phy_reg_igp - Read igp PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *  @locked: semaphore has already been acquired or not
- *
- *  Acquires semaphore, if necessary, then reads the PHY register at offset
- *  and stores the retrieved information in data.  Release any acquired
- *  semaphores before exiting.
- **/
-static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
-				    bool locked)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("__e1000_read_phy_reg_igp");
-
-	if (!locked) {
-		if (!hw->phy.ops.acquire)
-			return E1000_SUCCESS;
-
-		ret_val = hw->phy.ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
-	if (offset > MAX_PHY_MULTI_PAGE_REG)
-		ret_val = e1000_write_phy_reg_mdic(hw,
-						   IGP01E1000_PHY_PAGE_SELECT,
-						   (u16)offset);
-	if (!ret_val)
-		ret_val = e1000_read_phy_reg_mdic(hw,
-						  MAX_PHY_REG_ADDRESS & offset,
-						  data);
-	if (!locked)
-		hw->phy.ops.release(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_read_phy_reg_igp - Read igp PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Acquires semaphore then reads the PHY register at offset and stores the
- *  retrieved information in data.
- *  Release the acquired semaphore before exiting.
- **/
-s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	return __e1000_read_phy_reg_igp(hw, offset, data, false);
-}
-
-/**
- *  e1000_read_phy_reg_igp_locked - Read igp PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Reads the PHY register at offset and stores the retrieved information
- *  in data.  Assumes semaphore already acquired.
- **/
-s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	return __e1000_read_phy_reg_igp(hw, offset, data, true);
-}
-
-/**
- *  e1000_write_phy_reg_igp - Write igp PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *  @locked: semaphore has already been acquired or not
- *
- *  Acquires semaphore, if necessary, then writes the data to PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
-				     bool locked)
-{
-	s32 ret_val = E1000_SUCCESS;
-
-	DEBUGFUNC("e1000_write_phy_reg_igp");
-
-	if (!locked) {
-		if (!hw->phy.ops.acquire)
-			return E1000_SUCCESS;
-
-		ret_val = hw->phy.ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
-	if (offset > MAX_PHY_MULTI_PAGE_REG)
-		ret_val = e1000_write_phy_reg_mdic(hw,
-						   IGP01E1000_PHY_PAGE_SELECT,
-						   (u16)offset);
-	if (!ret_val)
-		ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS &
-						       offset,
-						   data);
-	if (!locked)
-		hw->phy.ops.release(hw);
-
-	return ret_val;
-}
-
-/**
- *  e1000_write_phy_reg_igp - Write igp PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Acquires semaphore then writes the data to PHY register
- *  at the offset.  Release any acquired semaphores before exiting.
- **/
-s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	return __e1000_write_phy_reg_igp(hw, offset, data, false);
-}
-
-/**
- *  e1000_write_phy_reg_igp_locked - Write igp PHY register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Writes the data to PHY register at the offset.
- *  Assumes semaphore already acquired.
- **/
-s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	return __e1000_write_phy_reg_igp(hw, offset, data, true);
-}
-
-/**
- *  __e1000_read_kmrn_reg - Read kumeran register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *  @locked: semaphore has already been acquired or not
- *
- *  Acquires semaphore, if necessary.  Then reads the PHY register at offset
- *  using the kumeran interface.  The information retrieved is stored in data.
- *  Release any acquired semaphores before exiting.
- **/
-static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
-				 bool locked)
-{
-	u32 kmrnctrlsta;
-
-	DEBUGFUNC("__e1000_read_kmrn_reg");
-
-	if (!locked) {
-		s32 ret_val = E1000_SUCCESS;
-
-		if (!hw->phy.ops.acquire)
-			return E1000_SUCCESS;
-
-		ret_val = hw->phy.ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
-	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
-		       E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
-	E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
-	E1000_WRITE_FLUSH(hw);
-
-	usec_delay(2);
-
-	kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA);
-	*data = (u16)kmrnctrlsta;
-
-	if (!locked)
-		hw->phy.ops.release(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_read_kmrn_reg_generic -  Read kumeran register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Acquires semaphore then reads the PHY register at offset using the
- *  kumeran interface.  The information retrieved is stored in data.
- *  Release the acquired semaphore before exiting.
- **/
-s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	return __e1000_read_kmrn_reg(hw, offset, data, false);
-}
-
-/**
- *  e1000_read_kmrn_reg_locked -  Read kumeran register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to be read
- *  @data: pointer to the read data
- *
- *  Reads the PHY register at offset using the kumeran interface.  The
- *  information retrieved is stored in data.
- *  Assumes semaphore already acquired.
- **/
-s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
-{
-	return __e1000_read_kmrn_reg(hw, offset, data, true);
-}
-
-/**
- *  __e1000_write_kmrn_reg - Write kumeran register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *  @locked: semaphore has already been acquired or not
- *
- *  Acquires semaphore, if necessary.  Then write the data to PHY register
- *  at the offset using the kumeran interface.  Release any acquired semaphores
- *  before exiting.
- **/
-static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
-				  bool locked)
-{
-	u32 kmrnctrlsta;
-
-	DEBUGFUNC("e1000_write_kmrn_reg_generic");
-
-	if (!locked) {
-		s32 ret_val = E1000_SUCCESS;
-
-		if (!hw->phy.ops.acquire)
-			return E1000_SUCCESS;
-
-		ret_val = hw->phy.ops.acquire(hw);
-		if (ret_val)
-			return ret_val;
-	}
-
-	kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
-		       E1000_KMRNCTRLSTA_OFFSET) | data;
-	E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta);
-	E1000_WRITE_FLUSH(hw);
-
-	usec_delay(2);
-
-	if (!locked)
-		hw->phy.ops.release(hw);
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_write_kmrn_reg_generic -  Write kumeran register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Acquires semaphore then writes the data to the PHY register at the offset
- *  using the kumeran interface.  Release the acquired semaphore before exiting.
- **/
-s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	return __e1000_write_kmrn_reg(hw, offset, data, false);
-}
-
-/**
- *  e1000_write_kmrn_reg_locked -  Write kumeran register
- *  @hw: pointer to the HW structure
- *  @offset: register offset to write to
- *  @data: data to write at register offset
- *
- *  Write the data to PHY register at the offset using the kumeran interface.
- *  Assumes semaphore already acquired.
- **/
-s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
-{
-	return __e1000_write_kmrn_reg(hw, offset, data, true);
-}
-
-/**
- *  e1000_set_master_slave_mode - Setup PHY for Master/slave mode
- *  @hw: pointer to the HW structure
- *
- *  Sets up Master/slave mode
- **/
-static s32 e1000_set_master_slave_mode(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 phy_data;
-
-	/* Resolve Master/Slave mode */
-	ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data);
-	if (ret_val)
-		return ret_val;
-
-	/* load defaults for future use */
-	hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ?
-				   ((phy_data & CR_1000T_MS_VALUE) ?
-				    e1000_ms_force_master :
-				    e1000_ms_force_slave) : e1000_ms_auto;
-
-	switch (hw->phy.ms_type) {
-	case e1000_ms_force_master:
-		phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
-		break;
-	case e1000_ms_force_slave:
-		phy_data |= CR_1000T_MS_ENABLE;
-		phy_data &= ~(CR_1000T_MS_VALUE);
-		break;
-	case e1000_ms_auto:
-		phy_data &= ~CR_1000T_MS_ENABLE;
-		/* fall-through */
-	default:
-		break;
-	}
-
-	return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data);
-}
-
-/**
- *  e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
- *  @hw: pointer to the HW structure
- *
- *  Sets up Carrier-sense on Transmit and downshift values.
- **/
-s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
-{
-	s32 ret_val;
-	u16 phy_data;
-
-	DEBUGFUNC("e1000_copper_link_setup_82577");
-
-	if (hw->phy.reset_disable)
-		return E1000_SUCCESS;
-
-	if (hw->phy.type == e1000_phy_82580) {
-		ret_val = hw->phy.ops.reset(hw);
-		if (ret_val) {
-			DEBUGOUT("Error resetting the PHY.\n");
-			return ret_val;
-		}
-	}
-
-	/* Enable CRS on Tx. This must be set for half-duplex operation. */
-	ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data);
-	if (ret_val)
-		return ret_val;
-
-	phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
-
-	/* Enable downshift */
-	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
-
-	ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data);
-	if (ret_val)
-		return ret_val;
-
-	/* Set MDI/MDIX mode */
-	ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
-	if (ret_val)
-		return ret_val;
-	phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK;
-	/* Options:
-	 *   0 - Auto (default)
-	 *   1 - MDI mode
-	 *   2 - MDI-X mode
-	 */
-	switch (hw->phy.mdix) {
-	case 1:
-		break;
-	case 2:
-		phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX;
-		break;
-	case 0:
-	default:
-		phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX;
-		break;
-	}
-	ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
-	if (ret_val)
-		return ret_val;
-
-	return e1000_set_master_slave_mode(hw);
-}
-
-/**
- *  e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link
- *  @hw: pointer to the HW structure
- *
- *  Sets up MDI/MDI-X and polarity for m88 PHY's.  If necessary, transmit clock
- *  and downshift values are set also.
- **/
-s32 e1000_copper_link_setup_m88(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 phy_data;
-
-	DEBUGFUNC("e1000_copper_link_setup_m88");
-
-	if (phy->reset_disable)
-		return E1000_SUCCESS;
-
-	/* Enable CRS on Tx. This must be set for half-duplex operation. */
-	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-	if (ret_val)
-		return ret_val;
-
-	phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
-	/* Options:
-	 *   MDI/MDI-X = 0 (default)
-	 *   0 - Auto for all speeds
-	 *   1 - MDI mode
-	 *   2 - MDI-X mode
-	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
-	 */
-	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
-	switch (phy->mdix) {
-	case 1:
-		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
-		break;
-	case 2:
-		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
-		break;
-	case 3:
-		phy_data |= M88E1000_PSCR_AUTO_X_1000T;
-		break;
-	case 0:
-	default:
-		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
-		break;
-	}
-
-	/* Options:
-	 *   disable_polarity_correction = 0 (default)
-	 *       Automatic Correction for Reversed Cable Polarity
-	 *   0 - Disabled
-	 *   1 - Enabled
-	 */
-	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
-	if (phy->disable_polarity_correction)
-		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-
-	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-	if (ret_val)
-		return ret_val;
-
-	if (phy->revision < E1000_REVISION_4) {
-		/* Force TX_CLK in the Extended PHY Specific Control Register
-		 * to 25MHz clock.
-		 */
-		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-					    &phy_data);
-		if (ret_val)
-			return ret_val;
-
-		phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
-		if ((phy->revision == E1000_REVISION_2) &&
-		    (phy->id == M88E1111_I_PHY_ID)) {
-			/* 82573L PHY - set the downshift counter to 5x. */
-			phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
-			phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
-		} else {
-			/* Configure Master and Slave downshift values */
-			phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
-				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
-			phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
-				     M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
-		}
-		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
-					     phy_data);
-		if (ret_val)
-			return ret_val;
-	}
-
-	/* Commit the changes. */
-	ret_val = phy->ops.commit(hw);
-	if (ret_val) {
-		DEBUGOUT("Error committing the PHY changes\n");
-		return ret_val;
-	}
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
- *  @hw: pointer to the HW structure
- *
- *  Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
- *  Also enables and sets the downshift parameters.
- **/
-s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 phy_data;
-
-	DEBUGFUNC("e1000_copper_link_setup_m88_gen2");
-
-	if (phy->reset_disable)
-		return E1000_SUCCESS;
-
-	/* Enable CRS on Tx. This must be set for half-duplex operation. */
-	ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
-	if (ret_val)
-		return ret_val;
-
-	/* Options:
-	 *   MDI/MDI-X = 0 (default)
-	 *   0 - Auto for all speeds
-	 *   1 - MDI mode
-	 *   2 - MDI-X mode
-	 *   3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
-	 */
-	phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
-	switch (phy->mdix) {
-	case 1:
-		phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
-		break;
-	case 2:
-		phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
-		break;
-	case 3:
-		/* M88E1112 does not support this mode) */
-		if (phy->id != M88E1112_E_PHY_ID) {
-			phy_data |= M88E1000_PSCR_AUTO_X_1000T;
-			break;
-		}
-	case 0:
-	default:
-		phy_data |= M88E1000_PSCR_AUTO_X_MODE;
-		break;
-	}
-
-	/* Options:
-	 *   disable_polarity_correction = 0 (default)
-	 *       Automatic Correction for Reversed Cable Polarity
-	 *   0 - Disabled
-	 *   1 - Enabled
-	 */
-	phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
-	if (phy->disable_polarity_correction)
-		phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-
-	/* Enable downshift and setting it to X6 */
-	if (phy->id == M88E1543_E_PHY_ID) {
-		phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE;
-		ret_val =
-		    phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-		if (ret_val)
-			return ret_val;
-
-		ret_val = phy->ops.commit(hw);
-		if (ret_val) {
-			DEBUGOUT("Error committing the PHY changes\n");
-			return ret_val;
-		}
-	}
-
-	phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
-	phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
-	phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
-
-	ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-	if (ret_val)
-		return ret_val;
-
-	/* Commit the changes. */
-	ret_val = phy->ops.commit(hw);
-	if (ret_val) {
-		DEBUGOUT("Error committing the PHY changes\n");
-		return ret_val;
-	}
-
-	ret_val = e1000_set_master_slave_mode(hw);
-	if (ret_val)
-		return ret_val;
-
-	return E1000_SUCCESS;
-}
-
-/**
- *  e1000_copper_link_setup_igp - Setup igp PHY's for copper link
- *  @hw: pointer to the HW structure
- *
- *  Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
- *  igp PHY's.
- **/
-s32 e1000_copper_link_setup_igp(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 data;
-
-	DEBUGFUNC("e1000_copper_link_setup_igp");
-
-	if (phy->reset_disable)
-		return E1000_SUCCESS;
-
-	ret_val = hw->phy.ops.reset(hw);
-	if (ret_val) {
-		DEBUGOUT("Error resetting the PHY.\n");
-		return ret_val;
-	}
-
-	/* Wait 100ms