[2/2] net/ixgbe: add support of loopback for X540/X550
Checks
Commit Message
Loopback mode is also supported on X540 and X550 NICs, according to
their datasheet (section 15.2). The way to set it up is a little
different of the 82599.
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
---
v2:
- disable / enable autoneg when loopback is requested for X540 / X550
---
drivers/net/ixgbe/base/ixgbe_type.h | 1 +
drivers/net/ixgbe/base/ixgbe_x540.c | 26 ++++++++++++++++
drivers/net/ixgbe/base/ixgbe_x540.h | 2 ++
drivers/net/ixgbe/base/ixgbe_x550.c | 26 ++++++++++++++++
drivers/net/ixgbe/base/ixgbe_x550.h | 1 +
drivers/net/ixgbe/ixgbe_ethdev.h | 5 ++-
drivers/net/ixgbe/ixgbe_rxtx.c | 61 +++++++++++++++++++++++++++++++++++--
7 files changed, 117 insertions(+), 5 deletions(-)
Comments
HI, Meunier && qi
> -----Original Message-----
> From: Julien Meunier [mailto:julien.meunier@nokia.com]
> Sent: Friday, February 8, 2019 1:30 AM
> To: Ananyev, Konstantin <konstantin.ananyev@intel.com>; Lu, Wenzhuo
> <wenzhuo.lu@intel.com>; Zhao1, Wei <wei.zhao1@intel.com>; Zhang, Qi Z
> <qi.z.zhang@intel.com>
> Cc: dev@dpdk.org
> Subject: [PATCH 2/2] net/ixgbe: add support of loopback for X540/X550
>
> Loopback mode is also supported on X540 and X550 NICs, according to their
> datasheet (section 15.2). The way to set it up is a little different of the 82599.
>
> Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
> ---
> v2:
> - disable / enable autoneg when loopback is requested for X540 / X550
> ---
> drivers/net/ixgbe/base/ixgbe_type.h | 1 +
> drivers/net/ixgbe/base/ixgbe_x540.c | 26 ++++++++++++++++
> drivers/net/ixgbe/base/ixgbe_x540.h | 2 ++
> drivers/net/ixgbe/base/ixgbe_x550.c | 26 ++++++++++++++++
> drivers/net/ixgbe/base/ixgbe_x550.h | 1 +
> drivers/net/ixgbe/ixgbe_ethdev.h | 5 ++-
> drivers/net/ixgbe/ixgbe_rxtx.c | 61
> +++++++++++++++++++++++++++++++++++--
> 7 files changed, 117 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ixgbe/base/ixgbe_type.h
> b/drivers/net/ixgbe/base/ixgbe_type.h
> index 077b8f0..c4af31e 100644
> --- a/drivers/net/ixgbe/base/ixgbe_type.h
> +++ b/drivers/net/ixgbe/base/ixgbe_type.h
> @@ -1649,6 +1649,7 @@ struct ixgbe_dmac_config {
> #define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800
> #define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex,
> bit:8 */
> #define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex,
> bit:7 */
> +#define IXGBE_MII_AUTONEG_ENABLE 0x1000
> #define IXGBE_MII_RESTART 0x200
> #define IXGBE_MII_AUTONEG_COMPLETE 0x20
> #define IXGBE_MII_AUTONEG_LINK_UP 0x04
> diff --git a/drivers/net/ixgbe/base/ixgbe_x540.c
> b/drivers/net/ixgbe/base/ixgbe_x540.c
> index f00f0ea..a241d41 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x540.c
> +++ b/drivers/net/ixgbe/base/ixgbe_x540.c
Is it possible to add these two function of ixgbe_setup_phy_autoneg_x540 and
ixgbe_setup_phy_autoneg_x550 in a file out of base folder? We need to avoid
change code in that, is that right? @qi
And also, it seems these 2 function do not have much difference,
can we use one instead of two function?(This point is not so important)
> @@ -1032,3 +1032,29 @@ s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw
> *hw, u32 index)
>
> return IXGBE_SUCCESS;
> }
> +
> +/*
> + * ixgbe_setup_phy_link_x540 - Enable/disable the autoneg
> + * @hw: pointer to hardware structure
> + * enable: enable/disable the autoneg
> + **/
> +s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable) {
> + s32 status = IXGBE_SUCCESS;
> + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
> +
> + DEBUGFUNC("ixgbe_setup_phy_autoneg_x540");
> +
> + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> + IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> &autoneg_reg);
> +
> + if (enable)
> + autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
> + else
> + autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
> +
> + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> + IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> autoneg_reg);
> +
> + return status;
> +}
> diff --git a/drivers/net/ixgbe/base/ixgbe_x540.h
> b/drivers/net/ixgbe/base/ixgbe_x540.h
> index 231dfe5..ef939ce 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x540.h
> +++ b/drivers/net/ixgbe/base/ixgbe_x540.h
> @@ -34,5 +34,7 @@ void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw);
>
> s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
> s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
> +
> +s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable);
The Space line seems not needed.
> #endif /* _IXGBE_X540_H_ */
>
> diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c
> b/drivers/net/ixgbe/base/ixgbe_x550.c
> index a920a14..f4ee188 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x550.c
> +++ b/drivers/net/ixgbe/base/ixgbe_x550.c
> @@ -4652,3 +4652,29 @@ bool ixgbe_fw_recovery_mode_X550(struct
> ixgbe_hw *hw)
>
> return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE); }
> +
> +/*
> + * ixgbe_setup_phy_link_x550 - Enable/disable the autoneg
> + * @hw: pointer to hardware structure
> + * enable: enable/disable the autoneg
> + **/
> +s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable) {
> + s32 status = IXGBE_SUCCESS;
> + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
> +
> + DEBUGFUNC("ixgbe_setup_phy_autoneg_x550");
> +
> + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> + IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> &autoneg_reg);
> +
> + if (enable)
> + autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
> + else
> + autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
> +
> + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
> + IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
> autoneg_reg);
> +
> + return status;
> +}
> diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h
> b/drivers/net/ixgbe/base/ixgbe_x550.h
> index 3bd98f2..dd4fa18 100644
> --- a/drivers/net/ixgbe/base/ixgbe_x550.h
> +++ b/drivers/net/ixgbe/base/ixgbe_x550.h
> @@ -93,4 +93,5 @@ s32 ixgbe_identify_sfp_module_X550em(struct
> ixgbe_hw *hw);
> s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
> s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx); bool
> ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw);
> +s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable);
> #endif /* _IXGBE_X550_H_ */
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h
> b/drivers/net/ixgbe/ixgbe_ethdev.h
> index 565c69c..c60a697 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.h
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
> @@ -65,9 +65,8 @@
> #define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT 500 /* 500us */
>
> /* Loopback operation modes */
> -/* 82599 specific loopback operation types */
> -#define IXGBE_LPBK_82599_NONE 0x0 /* Default value. Loopback is
> disabled. */
> -#define IXGBE_LPBK_82599_TX_RX 0x1 /* Tx->Rx loopback operation is
> enabled. */
> +#define IXGBE_LPBK_NONE 0x0 /* Default value. Loopback is disabled. */
> +#define IXGBE_LPBK_TX_RX 0x1 /* Tx->Rx loopback operation is enabled.
> +*/
>
> #define IXGBE_MAX_JUMBO_FRAME_SIZE 0x2600 /* Maximum Jumbo
> frame size. */
>
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c
> index c9a70a8..1472d13 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> @@ -49,6 +49,8 @@
> #include "ixgbe_ethdev.h"
> #include "base/ixgbe_dcb.h"
> #include "base/ixgbe_common.h"
> +#include "base/ixgbe_x540.h"
> +#include "base/ixgbe_x550.h"
> #include "ixgbe_rxtx.h"
>
> #ifdef RTE_LIBRTE_IEEE1588
> @@ -3174,6 +3176,7 @@ ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
> unsigned i;
> struct ixgbe_adapter *adapter =
> (struct ixgbe_adapter *)dev->data->dev_private;
> + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>
> PMD_INIT_FUNC_TRACE();
>
> @@ -3194,6 +3197,15 @@ ixgbe_dev_clear_queues(struct rte_eth_dev
> *dev)
> ixgbe_reset_rx_queue(adapter, rxq);
> }
> }
> + /* If loopback mode was enabled, reconfigure the link accordingly */
> + if (dev->data->dev_conf.lpbk_mode != 0) {
> + if (hw->mac.type == ixgbe_mac_X540)
> + ixgbe_setup_phy_autoneg_x540(hw, true);
> + else if (hw->mac.type == ixgbe_mac_X550 ||
> + hw->mac.type == ixgbe_mac_X550EM_x ||
> + hw->mac.type == ixgbe_mac_X550EM_a)
> + ixgbe_setup_phy_autoneg_x550(hw, true);
> + }
> }
>
> void
> @@ -5074,8 +5086,12 @@ ixgbe_check_supported_loopback_mode(struct
> rte_eth_dev *dev) {
> struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>
> - if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
> - if (hw->mac.type == ixgbe_mac_82599EB)
> + if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
> + if (hw->mac.type == ixgbe_mac_82599EB ||
> + hw->mac.type == ixgbe_mac_X540 ||
> + hw->mac.type == ixgbe_mac_X550 ||
> + hw->mac.type == ixgbe_mac_X550EM_x ||
> + hw->mac.type == ixgbe_mac_X550EM_a)
> return 0;
>
> return -ENOTSUP;
> @@ -5108,6 +5124,41 @@ ixgbe_setup_loopback_link_82599(struct
> ixgbe_hw *hw)
> msec_delay(50);
> }
>
> +/*
> + * Set up link loopback for X540 mode Tx->Rx.
> + */
> +static inline void __attribute__((cold))
> +ixgbe_setup_loopback_link_x540(struct ixgbe_hw *hw) {
> + uint32_t macc;
> + PMD_INIT_FUNC_TRACE();
> +
> + /* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
> + ixgbe_setup_phy_autoneg_x540(hw, false);
> +
> + /* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
> + macc = IXGBE_READ_REG(hw, IXGBE_MACC);
> + macc |= IXGBE_MACC_FLU;
> + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc); }
> +
> +/*
> + * Set up link loopback for X550 mode Tx->Rx.
> + */
> +static inline void __attribute__((cold))
> +ixgbe_setup_loopback_link_x550(struct ixgbe_hw *hw) {
> + uint32_t macc;
> + PMD_INIT_FUNC_TRACE();
> +
> + /* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
> + ixgbe_setup_phy_autoneg_x550(hw, false);
> +
> + /* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
> + macc = IXGBE_READ_REG(hw, IXGBE_MACC);
> + macc |= IXGBE_MACC_FLU;
> + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc); }
>
> /*
> * Start Transmit and Receive Units.
> @@ -5172,6 +5223,12 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
> if (dev->data->dev_conf.lpbk_mode != 0) {
> if (hw->mac.type == ixgbe_mac_82599EB)
> ixgbe_setup_loopback_link_82599(hw);
> + else if (hw->mac.type == ixgbe_mac_X540)
> + ixgbe_setup_loopback_link_x540(hw);
> + else if (hw->mac.type == ixgbe_mac_X550 ||
> + hw->mac.type == ixgbe_mac_X550EM_x ||
> + hw->mac.type == ixgbe_mac_X550EM_a)
> + ixgbe_setup_loopback_link_x550(hw);
The same, why do we have 2 branch for x540 and x550?
> }
>
> #ifdef RTE_LIBRTE_SECURITY
> --
> 2.10.2
Hi all,
Sorry for the delay. See my reply inline.
On 12/02/2019 07:37, Zhao1, Wei wrote:
> HI, Meunier && qi
>
> Is it possible to add these two function of ixgbe_setup_phy_autoneg_x540 and
> ixgbe_setup_phy_autoneg_x550 in a file out of base folder? We need to avoid
> change code in that, is that right? @qi
> And also, it seems these 2 function do not have much difference,
> can we use one instead of two function?(This point is not so important)
OK, no problem. I had some doubts when I modified these files.
So, I guess it's OK for you to have direct PHY operations (hw->phy.ops.
[read|write]_reg) in ixgbe_rxtx.c ?
>> * Start Transmit and Receive Units.
>> @@ -5172,6 +5223,12 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
>> if (dev->data->dev_conf.lpbk_mode != 0) {
>> if (hw->mac.type == ixgbe_mac_82599EB)
>> ixgbe_setup_loopback_link_82599(hw);
>> + else if (hw->mac.type == ixgbe_mac_X540)
>> + ixgbe_setup_loopback_link_x540(hw);
>> + else if (hw->mac.type == ixgbe_mac_X550 ||
>> + hw->mac.type == ixgbe_mac_X550EM_x ||
>> + hw->mac.type == ixgbe_mac_X550EM_a)
>> + ixgbe_setup_loopback_link_x550(hw);
>
> The same, why do we have 2 branch for x540 and x550?
>
I just wanted to respect the initial rule: 1 model = 1 function. But I
can merge them in one function as it's the same mechanism in order to
setup the loopback.
I will update a new patchset today.
Best regards,
Julien Meunier
@@ -1649,6 +1649,7 @@ struct ixgbe_dmac_config {
#define IXGBE_MII_5GBASE_T_ADVERTISE 0x0800
#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */
#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */
+#define IXGBE_MII_AUTONEG_ENABLE 0x1000
#define IXGBE_MII_RESTART 0x200
#define IXGBE_MII_AUTONEG_COMPLETE 0x20
#define IXGBE_MII_AUTONEG_LINK_UP 0x04
@@ -1032,3 +1032,29 @@ s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
return IXGBE_SUCCESS;
}
+
+/*
+ * ixgbe_setup_phy_link_x540 - Enable/disable the autoneg
+ * @hw: pointer to hardware structure
+ * enable: enable/disable the autoneg
+ **/
+s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+
+ DEBUGFUNC("ixgbe_setup_phy_autoneg_x540");
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+ if (enable)
+ autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
+ else
+ autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+ return status;
+}
@@ -34,5 +34,7 @@ void ixgbe_init_swfw_sync_X540(struct ixgbe_hw *hw);
s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_setup_phy_autoneg_x540(struct ixgbe_hw *hw, bool enable);
#endif /* _IXGBE_X540_H_ */
@@ -4652,3 +4652,29 @@ bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw)
return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE);
}
+
+/*
+ * ixgbe_setup_phy_link_x550 - Enable/disable the autoneg
+ * @hw: pointer to hardware structure
+ * enable: enable/disable the autoneg
+ **/
+s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+
+ DEBUGFUNC("ixgbe_setup_phy_autoneg_x550");
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+ if (enable)
+ autoneg_reg |= IXGBE_MII_AUTONEG_ENABLE;
+ else
+ autoneg_reg &= ~IXGBE_MII_AUTONEG_ENABLE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+ return status;
+}
@@ -93,4 +93,5 @@ s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw);
s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx);
bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_autoneg_x550(struct ixgbe_hw *hw, bool enable);
#endif /* _IXGBE_X550_H_ */
@@ -65,9 +65,8 @@
#define IXGBE_QUEUE_ITR_INTERVAL_DEFAULT 500 /* 500us */
/* Loopback operation modes */
-/* 82599 specific loopback operation types */
-#define IXGBE_LPBK_82599_NONE 0x0 /* Default value. Loopback is disabled. */
-#define IXGBE_LPBK_82599_TX_RX 0x1 /* Tx->Rx loopback operation is enabled. */
+#define IXGBE_LPBK_NONE 0x0 /* Default value. Loopback is disabled. */
+#define IXGBE_LPBK_TX_RX 0x1 /* Tx->Rx loopback operation is enabled. */
#define IXGBE_MAX_JUMBO_FRAME_SIZE 0x2600 /* Maximum Jumbo frame size. */
@@ -49,6 +49,8 @@
#include "ixgbe_ethdev.h"
#include "base/ixgbe_dcb.h"
#include "base/ixgbe_common.h"
+#include "base/ixgbe_x540.h"
+#include "base/ixgbe_x550.h"
#include "ixgbe_rxtx.h"
#ifdef RTE_LIBRTE_IEEE1588
@@ -3174,6 +3176,7 @@ ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
unsigned i;
struct ixgbe_adapter *adapter =
(struct ixgbe_adapter *)dev->data->dev_private;
+ struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
@@ -3194,6 +3197,15 @@ ixgbe_dev_clear_queues(struct rte_eth_dev *dev)
ixgbe_reset_rx_queue(adapter, rxq);
}
}
+ /* If loopback mode was enabled, reconfigure the link accordingly */
+ if (dev->data->dev_conf.lpbk_mode != 0) {
+ if (hw->mac.type == ixgbe_mac_X540)
+ ixgbe_setup_phy_autoneg_x540(hw, true);
+ else if (hw->mac.type == ixgbe_mac_X550 ||
+ hw->mac.type == ixgbe_mac_X550EM_x ||
+ hw->mac.type == ixgbe_mac_X550EM_a)
+ ixgbe_setup_phy_autoneg_x550(hw, true);
+ }
}
void
@@ -5074,8 +5086,12 @@ ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev)
{
struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX)
- if (hw->mac.type == ixgbe_mac_82599EB)
+ if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_TX_RX)
+ if (hw->mac.type == ixgbe_mac_82599EB ||
+ hw->mac.type == ixgbe_mac_X540 ||
+ hw->mac.type == ixgbe_mac_X550 ||
+ hw->mac.type == ixgbe_mac_X550EM_x ||
+ hw->mac.type == ixgbe_mac_X550EM_a)
return 0;
return -ENOTSUP;
@@ -5108,6 +5124,41 @@ ixgbe_setup_loopback_link_82599(struct ixgbe_hw *hw)
msec_delay(50);
}
+/*
+ * Set up link loopback for X540 mode Tx->Rx.
+ */
+static inline void __attribute__((cold))
+ixgbe_setup_loopback_link_x540(struct ixgbe_hw *hw)
+{
+ uint32_t macc;
+ PMD_INIT_FUNC_TRACE();
+
+ /* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
+ ixgbe_setup_phy_autoneg_x540(hw, false);
+
+ /* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
+ macc = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc |= IXGBE_MACC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc);
+}
+
+/*
+ * Set up link loopback for X550 mode Tx->Rx.
+ */
+static inline void __attribute__((cold))
+ixgbe_setup_loopback_link_x550(struct ixgbe_hw *hw)
+{
+ uint32_t macc;
+ PMD_INIT_FUNC_TRACE();
+
+ /* datasheet 15.2.1: disable AUTONEG (PHY Bit 7.0.C) */
+ ixgbe_setup_phy_autoneg_x550(hw, false);
+
+ /* datasheet 15.2.1: MACC.FLU = 1 (force link up) */
+ macc = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc |= IXGBE_MACC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc);
+}
/*
* Start Transmit and Receive Units.
@@ -5172,6 +5223,12 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
if (dev->data->dev_conf.lpbk_mode != 0) {
if (hw->mac.type == ixgbe_mac_82599EB)
ixgbe_setup_loopback_link_82599(hw);
+ else if (hw->mac.type == ixgbe_mac_X540)
+ ixgbe_setup_loopback_link_x540(hw);
+ else if (hw->mac.type == ixgbe_mac_X550 ||
+ hw->mac.type == ixgbe_mac_X550EM_x ||
+ hw->mac.type == ixgbe_mac_X550EM_a)
+ ixgbe_setup_loopback_link_x550(hw);
}
#ifdef RTE_LIBRTE_SECURITY