[v2] net/bonding: fix slave tx burst for mode 4
Checks
Commit Message
From: Chas Williams <chas3@att.com>
The tx burst routine always needs to check for pending LACPDUs
and send them if available. Do this first to prioritize the
control traffic. We can still early exit, before calculating
the distribution slaves, if there isn't any data packets.
Fixes: 09150784a776 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Reported-by: Hui Zhao <zhaohui8@huawei.com>
Cc: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Chas Williams <chas3@att.com>
---
drivers/net/bonding/rte_eth_bond_pmd.c | 48 +++++++++++++-------------
1 file changed, 24 insertions(+), 24 deletions(-)
Comments
On 2/14/2019 7:09 PM, Chas Williams wrote:
> From: Chas Williams <chas3@att.com>
>
> The tx burst routine always needs to check for pending LACPDUs
> and send them if available. Do this first to prioritize the
> control traffic. We can still early exit, before calculating
> the distribution slaves, if there isn't any data packets.
>
> Fixes: 09150784a776 ("net/bonding: burst mode hash calculation")
> Cc: stable@dpdk.org
> Reported-by: Hui Zhao <zhaohui8@huawei.com>
> Cc: Yunjian Wang <wangyunjian@huawei.com>
> Signed-off-by: Chas Williams <chas3@att.com>
Applied to dpdk-next-net/master, thanks.
@@ -1298,9 +1298,6 @@ bond_ethdev_tx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
uint16_t i;
- if (unlikely(nb_bufs == 0))
- return 0;
-
/* Copy slave list to protect against slave up/down changes during tx
* bursting */
slave_count = internals->active_slave_count;
@@ -1310,6 +1307,30 @@ bond_ethdev_tx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
memcpy(slave_port_ids, internals->active_slaves,
sizeof(slave_port_ids[0]) * slave_count);
+ /* Check for LACP control packets and send if available */
+ for (i = 0; i < slave_count; i++) {
+ struct port *port = &bond_mode_8023ad_ports[slave_port_ids[i]];
+ struct rte_mbuf *ctrl_pkt = NULL;
+
+ if (likely(rte_ring_empty(port->tx_ring)))
+ continue;
+
+ if (rte_ring_dequeue(port->tx_ring,
+ (void **)&ctrl_pkt) != -ENOENT) {
+ slave_tx_count = rte_eth_tx_burst(slave_port_ids[i],
+ bd_tx_q->queue_id, &ctrl_pkt, 1);
+ /*
+ * re-enqueue LAG control plane packets to buffering
+ * ring if transmission fails so the packet isn't lost.
+ */
+ if (slave_tx_count != 1)
+ rte_ring_enqueue(port->tx_ring, ctrl_pkt);
+ }
+ }
+
+ if (unlikely(nb_bufs == 0))
+ return 0;
+
dist_slave_count = 0;
for (i = 0; i < slave_count; i++) {
struct port *port = &bond_mode_8023ad_ports[slave_port_ids[i]];
@@ -1365,27 +1386,6 @@ bond_ethdev_tx_burst_8023ad(void *queue, struct rte_mbuf **bufs,
}
}
- /* Check for LACP control packets and send if available */
- for (i = 0; i < slave_count; i++) {
- struct port *port = &bond_mode_8023ad_ports[slave_port_ids[i]];
- struct rte_mbuf *ctrl_pkt = NULL;
-
- if (likely(rte_ring_empty(port->tx_ring)))
- continue;
-
- if (rte_ring_dequeue(port->tx_ring,
- (void **)&ctrl_pkt) != -ENOENT) {
- slave_tx_count = rte_eth_tx_burst(slave_port_ids[i],
- bd_tx_q->queue_id, &ctrl_pkt, 1);
- /*
- * re-enqueue LAG control plane packets to buffering
- * ring if transmission fails so the packet isn't lost.
- */
- if (slave_tx_count != 1)
- rte_ring_enqueue(port->tx_ring, ctrl_pkt);
- }
- }
-
return total_tx_count;
}