@@ -160,6 +160,8 @@ Limitations
- can be applied to VF ports only.
- must specify PF port action (packet redirection from VF to PF).
+- ICMP/ICMP6's code/type matching cannot be supported togeter with IP-in-IP tunnel.
+
Statistics
----------
@@ -518,6 +520,19 @@ Firmware configuration
IP_OVER_VXLAN_EN True(1)
IP_OVER_VXLAN_PORT <udp dport>
+- enable ICMP/ICMP6's code/type field matching
+
+ .. code-block:: console
+
+ mlxconfig -d <mst device> set FLEX_PARSER_PROFILE_ENABLE=2
+
+ Verify configurations are set:
+
+ .. code-block:: console
+
+ mlxconfig -d <mst device> query | grep FLEX_PARSER_PROFILE_ENABLE
+ FLEX_PARSER_PROFILE_ENABLE 2
+
Prerequisites
-------------
@@ -1049,6 +1049,108 @@ mlx5_flow_validate_attributes(struct rte_eth_dev *dev,
return 0;
}
+/**
+ * Validate ICMP6 item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_icmp6 *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMPV6)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with ICMP6 layer");
+ if (!(item_flags & l3m))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on ICMP");
+ if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L4 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_icmp6_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_icmp6_mask,
+ sizeof(struct rte_flow_item_icmp6), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+/**
+ * Validate ICMP item.
+ *
+ * @param[in] item
+ * Item specification.
+ * @param[in] item_flags
+ * Bit-fields that holds the items detected until now.
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_validate_item_icmp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error)
+{
+ const struct rte_flow_item_icmp *mask = item->mask;
+ const int tunnel = !!(item_flags & MLX5_FLOW_LAYER_TUNNEL);
+ const uint64_t l3m = tunnel ? MLX5_FLOW_LAYER_INNER_L3 :
+ MLX5_FLOW_LAYER_OUTER_L3;
+ const uint64_t l4m = tunnel ? MLX5_FLOW_LAYER_INNER_L4 :
+ MLX5_FLOW_LAYER_OUTER_L4;
+ int ret;
+
+ if (target_protocol != 0xFF && target_protocol != IPPROTO_ICMP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "protocol filtering not compatible"
+ " with ICMP layer");
+ if (!(item_flags & l3m))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "L3 is mandatory to filter on ICMP");
+ if (item_flags & l4m)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM, item,
+ "multiple L4 layers not supported");
+ if (!mask)
+ mask = &rte_flow_item_icmp_mask;
+ ret = mlx5_flow_item_acceptable
+ (item, (const uint8_t *)mask,
+ (const uint8_t *)&rte_flow_item_icmp_mask,
+ sizeof(struct rte_flow_item_icmp), error);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
/**
* Validate Ethernet item.
*
@@ -50,6 +50,10 @@
#define MLX5_FLOW_ITEM_METADATA (1u << 16)
#define MLX5_FLOW_ITEM_PORT_ID (1u << 17)
+/* Pattern MISC bits. */
+#define MLX5_FLOW_LAYER_ICMP (1u << 18)
+#define MLX5_FLOW_LAYER_ICMP6 (1u << 18)
+
/* Outer Masks. */
#define MLX5_FLOW_LAYER_OUTER_L3 \
(MLX5_FLOW_LAYER_OUTER_L3_IPV4 | MLX5_FLOW_LAYER_OUTER_L3_IPV6)
@@ -512,6 +516,14 @@ int mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
uint64_t item_flags,
struct rte_eth_dev *dev,
struct rte_flow_error *error);
+int mlx5_flow_validate_item_icmp(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error);
+int mlx5_flow_validate_item_icmp6(const struct rte_flow_item *item,
+ uint64_t item_flags,
+ uint8_t target_protocol,
+ struct rte_flow_error *error);
/* mlx5_flow_tcf.c */
@@ -2207,6 +2207,22 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr *attr,
return ret;
last_item = MLX5_FLOW_ITEM_METADATA;
break;
+ case RTE_FLOW_ITEM_TYPE_ICMP:
+ ret = mlx5_flow_validate_item_icmp(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_ICMP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ICMP6:
+ ret = mlx5_flow_validate_item_icmp6(items, item_flags,
+ next_protocol,
+ error);
+ if (ret < 0)
+ return ret;
+ item_flags |= MLX5_FLOW_LAYER_ICMP6;
+ break;
default:
return rte_flow_error_set(error, ENOTSUP,
RTE_FLOW_ERROR_TYPE_ITEM,
@@ -3245,6 +3261,102 @@ flow_dv_translate_item_port_id(struct rte_eth_dev *dev, void *matcher,
return 0;
}
+/**
+ * Add ICMP6 item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_icmp6(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_icmp6 *icmp6_m = item->mask;
+ const struct rte_flow_item_icmp6 *icmp6_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc3_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_3);
+ void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_ICMPV6);
+ if (!icmp6_v)
+ return;
+ if (!icmp6_m)
+ icmp6_m = &rte_flow_item_icmp6_mask;
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmpv6_type, icmp6_m->type);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmpv6_type,
+ icmp6_v->type & icmp6_m->type);
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmpv6_code, icmp6_m->code);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmpv6_code,
+ icmp6_v->code & icmp6_m->code);
+}
+
+/**
+ * Add ICMP item to matcher and to the value.
+ *
+ * @param[in, out] matcher
+ * Flow matcher.
+ * @param[in, out] key
+ * Flow matcher value.
+ * @param[in] item
+ * Flow pattern to translate.
+ * @param[in] inner
+ * Item is inner pattern.
+ */
+static void
+flow_dv_translate_item_icmp(void *matcher, void *key,
+ const struct rte_flow_item *item,
+ int inner)
+{
+ const struct rte_flow_item_icmp *icmp_m = item->mask;
+ const struct rte_flow_item_icmp *icmp_v = item->spec;
+ void *headers_m;
+ void *headers_v;
+ void *misc3_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ misc_parameters_3);
+ void *misc3_v = MLX5_ADDR_OF(fte_match_param, key, misc_parameters_3);
+ if (inner) {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ inner_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, inner_headers);
+ } else {
+ headers_m = MLX5_ADDR_OF(fte_match_param, matcher,
+ outer_headers);
+ headers_v = MLX5_ADDR_OF(fte_match_param, key, outer_headers);
+ }
+ MLX5_SET(fte_match_set_lyr_2_4, headers_m, ip_protocol, 0xFF);
+ MLX5_SET(fte_match_set_lyr_2_4, headers_v, ip_protocol, IPPROTO_ICMP);
+ if (!icmp_v)
+ return;
+ if (!icmp_m)
+ icmp_m = &rte_flow_item_icmp_mask;
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmp_type,
+ icmp_m->hdr.icmp_type);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmp_type,
+ icmp_v->hdr.icmp_type & icmp_m->hdr.icmp_type);
+ MLX5_SET(fte_match_set_misc3, misc3_m, icmp_code,
+ icmp_m->hdr.icmp_code);
+ MLX5_SET(fte_match_set_misc3, misc3_v, icmp_code,
+ icmp_v->hdr.icmp_code & icmp_m->hdr.icmp_code);
+}
+
static uint32_t matcher_zero[MLX5_ST_SZ_DW(fte_match_param)] = { 0 };
#define HEADER_IS_ZERO(match_criteria, headers) \
@@ -4020,6 +4132,16 @@ flow_dv_translate(struct rte_eth_dev *dev,
items);
last_item = MLX5_FLOW_ITEM_METADATA;
break;
+ case RTE_FLOW_ITEM_TYPE_ICMP:
+ flow_dv_translate_item_icmp(match_mask, match_value,
+ items, tunnel);
+ item_flags |= MLX5_FLOW_LAYER_ICMP;
+ break;
+ case RTE_FLOW_ITEM_TYPE_ICMP6:
+ flow_dv_translate_item_icmp6(match_mask, match_value,
+ items, tunnel);
+ item_flags |= MLX5_FLOW_LAYER_ICMP6;
+ break;
default:
break;
}