[v5,1/7] ethdev: add set ptype function
Checks
Commit Message
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add `rte_eth_dev_set_supported_ptypes` function that will allow the
application to inform the PMD the packet types it is interested in.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD can
return `rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_supported_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
doc/guides/nics/features.rst | 8 +++--
doc/guides/rel_notes/release_19_11.rst | 7 +++++
lib/librte_ethdev/rte_ethdev.c | 38 ++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 29 ++++++++++++++++++
lib/librte_ethdev/rte_ethdev_core.h | 6 ++++
lib/librte_ethdev/rte_ethdev_version.map | 3 ++
6 files changed, 89 insertions(+), 2 deletions(-)
@@ -583,9 +583,13 @@ Packet type parsing
-------------------
Supports packet type parsing and returns a list of supported types.
+Allows application to set ptypes it is interested in.
-* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``.
-* **[related] API**: ``rte_eth_dev_get_supported_ptypes()``.
+* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``,
+ ``dev_supported_ptypes_set``.
+* **[related] API**: ``rte_eth_dev_get_supported_ptypes()``,
+ ``rte_eth_dev_set_supported_ptypes()``.
+* **[provides] mbuf**: ``mbuf.packet_type``.
.. _nic_features_timesync:
@@ -56,6 +56,13 @@ New Features
Also, make sure to start the actual text at the margin.
=========================================================
+* **Added ethdev API to set supported packet types**
+
+ * Added new API ``rte_eth_dev_set_supported_ptypes`` that allows an
+ application to inform PMD about packet types classification the application
+ is interested in
+ * This scheme will allow PMDs to avoid lookup to internal ptype table on Rx
+ and thereby improve Rx performance if application wishes do so.
Removed Items
-------------
@@ -2602,6 +2602,44 @@ rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
return j;
}
+int
+rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *set_ptypes, int num)
+{
+ int i, j;
+ struct rte_eth_dev *dev;
+ const uint32_t *all_ptypes;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_get, 0);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_set, 0);
+
+ if (ptype_mask == 0)
+ return (*dev->dev_ops->dev_supported_ptypes_set)(dev,
+ ptype_mask);
+
+ all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
+ if (all_ptypes == NULL)
+ return 0;
+
+ for (i = 0, j = 0; set_ptypes && (all_ptypes[i] != RTE_PTYPE_UNKNOWN);
+ ++i) {
+ if (ptype_mask & all_ptypes[i]) {
+ if (j < num - 1) {
+ set_ptypes[j] = all_ptypes[i];
+ j++;
+ continue;
+ }
+ break;
+ }
+ }
+
+ set_ptypes[j] = RTE_PTYPE_UNKNOWN;
+
+ return (*dev->dev_ops->dev_supported_ptypes_set)(dev, ptype_mask);
+}
+
void
rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr)
{
@@ -2431,6 +2431,35 @@ int rte_eth_dev_fw_version_get(uint16_t port_id,
*/
int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
uint32_t *ptypes, int num);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Inform Ethernet device of the packet types classification in which
+ * the recipient is interested.
+ *
+ * Application can use this function to set only specific ptypes that it's
+ * interested. This information can be used by the PMD to optimize Rx path.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ptype_mask
+ * The ptype family that application is interested in.
+ * @param set_ptypes
+ * An array pointer to store set packet types, allocated by caller. The
+ * function marks the end of array with RTE_PTYPE_UNKNOWN.
+ * @param num
+ * Size of the array pointed by param ptypes.
+ * Should be rte_eth_dev_get_supported_ptypes() + 1 to accommodate the
+ * set ptypes.
+ * @return
+ * - (0) if Success.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *ptype_mask* is invalid.
+ */
+__rte_experimental
+int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *set_ptypes, int num);
/**
* Retrieve the MTU of an Ethernet device.
@@ -110,6 +110,10 @@ typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
/**< @internal Get supported ptypes of an Ethernet device. */
+typedef uint32_t (*eth_dev_supported_ptypes_set_t)(struct rte_eth_dev *dev,
+ uint32_t ptype_mask);
+/**< @internal Inform device about packet types in which the recipient is interested. */
+
typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
uint16_t queue_id);
/**< @internal Start rx and tx of a queue of an Ethernet device. */
@@ -421,6 +425,8 @@ struct eth_dev_ops {
eth_fw_version_get_t fw_version_get; /**< Get firmware version. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
/**< Get packet types supported and identified by device. */
+ eth_dev_supported_ptypes_set_t dev_supported_ptypes_set;
+ /**< Inform device about packet types in which the recipient is interested. */
vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
@@ -283,4 +283,7 @@ EXPERIMENTAL {
# added in 19.08
rte_eth_read_clock;
+
+ # added in 19.11
+ rte_eth_dev_set_supported_ptypes;
};