[v2,07/14] app/testpmd: add hairpin support
diff mbox series

Message ID 1570218855-73478-8-git-send-email-orika@mellanox.com
State Superseded
Delegated to: Ferruh Yigit
Headers show
Series
  • add hairpin feature
Related show

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Ori Kam Oct. 4, 2019, 7:54 p.m. UTC
This commit introduce the hairpin queues to the testpmd.
the hairpin queue is configured using --hairpinq=<n>
the hairpin queue adds n queue objects for both the total number
of TX queues and RX queues.
The connection between the queues are 1 to 1, first Rx hairpin queue
will be connected to the first Tx hairpin queue

Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>

---
 app/test-pmd/parameters.c | 12 +++++++++
 app/test-pmd/testpmd.c    | 62 +++++++++++++++++++++++++++++++++++++++++++++--
 app/test-pmd/testpmd.h    |  1 +
 3 files changed, 73 insertions(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 6c78dca..16bdcc8 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -147,6 +147,8 @@ 
 	printf("  --rxd=N: set the number of descriptors in RX rings to N.\n");
 	printf("  --txq=N: set the number of TX queues per port to N.\n");
 	printf("  --txd=N: set the number of descriptors in TX rings to N.\n");
+	printf("  --hairpinq=N: set the number of hairpin queues per port to "
+	       "N.\n");
 	printf("  --burst=N: set the number of packets per burst to N.\n");
 	printf("  --mbcache=N: set the cache of mbuf memory pool to N.\n");
 	printf("  --rxpt=N: set prefetch threshold register of RX rings to N.\n");
@@ -618,6 +620,7 @@ 
 		{ "txq",			1, 0, 0 },
 		{ "rxd",			1, 0, 0 },
 		{ "txd",			1, 0, 0 },
+		{ "hairpinq",			1, 0, 0 },
 		{ "burst",			1, 0, 0 },
 		{ "mbcache",			1, 0, 0 },
 		{ "txpt",			1, 0, 0 },
@@ -1036,6 +1039,15 @@ 
 						  " >= 0 && <= %u\n", n,
 						  get_allowed_max_nb_txq(&pid));
 			}
+			if (!strcmp(lgopts[opt_idx].name, "hairpinq")) {
+				n = atoi(optarg);
+				if (n >= 0 && check_nb_txq((queueid_t)n) == 0)
+					nb_hairpinq = (queueid_t) n;
+				else
+					rte_exit(EXIT_FAILURE, "txq %d invalid - must be"
+						  " >= 0 && <= %u\n", n,
+						  get_allowed_max_nb_txq(&pid));
+			}
 			if (!nb_rxq && !nb_txq) {
 				rte_exit(EXIT_FAILURE, "Either rx or tx queues should "
 						"be non-zero\n");
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 5701f31..25241f6 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -235,6 +235,7 @@  struct fwd_engine * fwd_engines[] = {
 /*
  * Configurable number of RX/TX queues.
  */
+queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */
 queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
 queueid_t nb_txq = 1; /**< Number of TX queues per port. */
 
@@ -2064,6 +2065,11 @@  struct extmem_param {
 	queueid_t qi;
 	struct rte_port *port;
 	struct rte_ether_addr mac_addr;
+	struct rte_eth_hairpin_conf hairpin_conf = {
+		.peer_n = 1,
+	};
+	int i;
+	struct rte_eth_hairpin_cap cap;
 
 	if (port_id_is_invalid(pid, ENABLED_WARN))
 		return 0;
@@ -2096,9 +2102,16 @@  struct extmem_param {
 			configure_rxtx_dump_callbacks(0);
 			printf("Configuring Port %d (socket %u)\n", pi,
 					port->socket_id);
+			if (nb_hairpinq > 0 &&
+			    rte_eth_dev_hairpin_capability_get(pi, &cap)) {
+				printf("Port %d doesn't support hairpin "
+				       "queues\n", pi);
+				return -1;
+			}
 			/* configure port */
-			diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
-						&(port->dev_conf));
+			diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq,
+						     nb_txq + nb_hairpinq,
+						     &(port->dev_conf));
 			if (diag != 0) {
 				if (rte_atomic16_cmpset(&(port->port_status),
 				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
@@ -2191,6 +2204,51 @@  struct extmem_param {
 				port->need_reconfig_queues = 1;
 				return -1;
 			}
+			/* setup hairpin queues */
+			i = 0;
+			for (qi = nb_txq; qi < nb_hairpinq + nb_txq; qi++) {
+				hairpin_conf.peers[0].port = pi;
+				hairpin_conf.peers[0].queue = i + nb_rxq;
+				diag = rte_eth_tx_hairpin_queue_setup
+					(pi, qi, nb_txd, &hairpin_conf);
+				i++;
+				if (diag == 0)
+					continue;
+
+				/* Fail to setup rx queue, return */
+				if (rte_atomic16_cmpset(&(port->port_status),
+							RTE_PORT_HANDLING,
+							RTE_PORT_STOPPED) == 0)
+					printf("Port %d can not be set back "
+							"to stopped\n", pi);
+				printf("Fail to configure port %d hairpin "
+				       "queues\n", pi);
+				/* try to reconfigure queues next time */
+				port->need_reconfig_queues = 1;
+				return -1;
+			}
+			i = 0;
+			for (qi = nb_rxq; qi < nb_hairpinq + nb_rxq; qi++) {
+				hairpin_conf.peers[0].port = pi;
+				hairpin_conf.peers[0].queue = i + nb_txq;
+				diag = rte_eth_rx_hairpin_queue_setup
+					(pi, qi, nb_rxd, &hairpin_conf);
+				i++;
+				if (diag == 0)
+					continue;
+
+				/* Fail to setup rx queue, return */
+				if (rte_atomic16_cmpset(&(port->port_status),
+							RTE_PORT_HANDLING,
+							RTE_PORT_STOPPED) == 0)
+					printf("Port %d can not be set back "
+							"to stopped\n", pi);
+				printf("Fail to configure port %d hairpin "
+				       "queues\n", pi);
+				/* try to reconfigure queues next time */
+				port->need_reconfig_queues = 1;
+				return -1;
+			}
 		}
 		configure_rxtx_dump_callbacks(verbose_level);
 		/* start port */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f8ebe71..a28d043 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -383,6 +383,7 @@  struct queue_stats_mappings {
 
 extern uint64_t rss_hf;
 
+extern queueid_t nb_hairpinq;
 extern queueid_t nb_rxq;
 extern queueid_t nb_txq;