[v10,1/7] ethdev: add set ptype function
Checks
Commit Message
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add `rte_eth_dev_set_supported_ptypes` function that will allow the
application to inform the PMD the packet types it is interested in.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD can
return `rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_supported_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
doc/guides/nics/features.rst | 8 ++-
doc/guides/rel_notes/release_19_11.rst | 8 +++
lib/librte_ethdev/rte_ethdev.c | 84 ++++++++++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 37 +++++++++++
lib/librte_ethdev/rte_ethdev_core.h | 19 ++++++
lib/librte_ethdev/rte_ethdev_version.map | 3 +
6 files changed, 157 insertions(+), 2 deletions(-)
Comments
On 10/9/19 6:33 PM, pbhagavatula@marvell.com wrote:
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Add `rte_eth_dev_set_supported_ptypes` function that will allow the
> application to inform the PMD the packet types it is interested in.
> Based on the ptypes set PMDs can optimize their Rx path.
>
> -If application doesn’t want any ptype information it can call
> `rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
> and PMD may skip packet type processing and set rte_mbuf::packet_type to
> RTE_PTYPE_UNKNOWN.
>
> -If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD can
> return `rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
>
> -If application is interested only in L2/L3 layer, it can inform the PMD
> to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
> `rte_eth_dev_set_supported_ptypes(ethdev_id,
> RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
>
> Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
> Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Sorry, but few nits below.
[snip]
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 17d183e1f..349483707 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -2602,6 +2602,90 @@ rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
> return j;
> }
>
> +int
> +rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
> + uint32_t *set_ptypes, unsigned int num)
> +{
> + const uint32_t valid_ptype_masks[] = {
> + RTE_PTYPE_L2_MASK,
> + RTE_PTYPE_L3_MASK,
> + RTE_PTYPE_L4_MASK,
> + RTE_PTYPE_TUNNEL_MASK,
> + RTE_PTYPE_INNER_L2_MASK,
> + RTE_PTYPE_INNER_L3_MASK,
> + RTE_PTYPE_INNER_L4_MASK,
> + };
> + const uint32_t *all_ptypes;
> + struct rte_eth_dev *dev;
> + unsigned int i, j;
> + int ret;
> +
> + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> + dev = &rte_eth_devices[port_id];
> +
> + if (num > 0 && set_ptypes == NULL)
> + return -EINVAL;
> +
> + if (*dev->dev_ops->dev_supported_ptypes_get == NULL ||
> + *dev->dev_ops->dev_supported_ptypes_set == NULL) {
> + ret = 0;
> + goto ptype_unknown;
> + }
> +
> + if (ptype_mask == 0) {
> + ret = (*dev->dev_ops->dev_supported_ptypes_set)(dev,
> + ptype_mask);
> + goto ptype_unknown;
> + }
> +
> + for (i = 0; i < sizeof(valid_ptype_masks)/sizeof(valid_ptype_masks[0]);
RTE_DIM should be used instead of sizeof/sizeof
> + i++) {
> + uint32_t mask = ptype_mask & valid_ptype_masks[i];
> + if (mask && mask != valid_ptype_masks[i]) {
> + ret = -EINVAL;
> + goto ptype_unknown;
> + }
> + }
> +
> + if (ptype_mask & ~RTE_PTYPE_ALL_MASK) {
> + ret = -EINVAL;
> + goto ptype_unknown;
> + }
It does not protect against more masks added in the future and lost
in your list above but still used in request.
It is better just add extra variable and remove bits
from there while masks are checked in the loop. Then it should be
checked here that the mask is 0 (no bits are left and everything is
checked).
> +
> + all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
> + if (all_ptypes == NULL) {
> + ret = 0;
> + goto ptype_unknown;
> + }
> +
> + /*
> + * Accodommodate as many set_ptypes as possible. If the supplied
> + * set_ptypes array is insufficient fill it partially.
> + */
> + for (i = 0, j = 0; set_ptypes != NULL &&
> + (all_ptypes[i] != RTE_PTYPE_UNKNOWN); ++i) {
> + if (ptype_mask & all_ptypes[i]) {
> + if (j < num - 1) {
> + set_ptypes[j] = all_ptypes[i];
> + j++;
> + continue;
> + }
> + break;
> + }
> + }
> +
> + if (set_ptypes != NULL && j < num)
> + set_ptypes[j] = RTE_PTYPE_UNKNOWN;
> +
> + return (*dev->dev_ops->dev_supported_ptypes_set)(dev, ptype_mask);
> +
> +ptype_unknown:
> + if (num > 0)
> + set_ptypes[0] = RTE_PTYPE_UNKNOWN;
> +
> + return ret;
> +}
> +
> void
> rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr)
> {
[snip]
@@ -583,9 +583,13 @@ Packet type parsing
-------------------
Supports packet type parsing and returns a list of supported types.
+Allows application to set ptypes it is interested in.
-* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``.
-* **[related] API**: ``rte_eth_dev_get_supported_ptypes()``.
+* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``,
+ ``dev_supported_ptypes_set``.
+* **[related] API**: ``rte_eth_dev_get_supported_ptypes()``,
+ ``rte_eth_dev_set_supported_ptypes()``.
+* **[provides] mbuf**: ``mbuf.packet_type``.
.. _nic_features_timesync:
@@ -79,6 +79,14 @@ New Features
Added stateful decompression support in the Intel QuickAssist Technology PMD.
Please note that stateful compression is not supported.
+* **Added ethdev API to set supported packet types**
+
+ * Added new API ``rte_eth_dev_set_supported_ptypes`` that allows an
+ application to inform PMD about packet types classification the application
+ is interested in
+ * This scheme will allow PMDs to avoid lookup to internal ptype table on Rx
+ and thereby improve Rx performance if application wishes do so.
+
Removed Items
-------------
@@ -2602,6 +2602,90 @@ rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
return j;
}
+int
+rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *set_ptypes, unsigned int num)
+{
+ const uint32_t valid_ptype_masks[] = {
+ RTE_PTYPE_L2_MASK,
+ RTE_PTYPE_L3_MASK,
+ RTE_PTYPE_L4_MASK,
+ RTE_PTYPE_TUNNEL_MASK,
+ RTE_PTYPE_INNER_L2_MASK,
+ RTE_PTYPE_INNER_L3_MASK,
+ RTE_PTYPE_INNER_L4_MASK,
+ };
+ const uint32_t *all_ptypes;
+ struct rte_eth_dev *dev;
+ unsigned int i, j;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (num > 0 && set_ptypes == NULL)
+ return -EINVAL;
+
+ if (*dev->dev_ops->dev_supported_ptypes_get == NULL ||
+ *dev->dev_ops->dev_supported_ptypes_set == NULL) {
+ ret = 0;
+ goto ptype_unknown;
+ }
+
+ if (ptype_mask == 0) {
+ ret = (*dev->dev_ops->dev_supported_ptypes_set)(dev,
+ ptype_mask);
+ goto ptype_unknown;
+ }
+
+ for (i = 0; i < sizeof(valid_ptype_masks)/sizeof(valid_ptype_masks[0]);
+ i++) {
+ uint32_t mask = ptype_mask & valid_ptype_masks[i];
+ if (mask && mask != valid_ptype_masks[i]) {
+ ret = -EINVAL;
+ goto ptype_unknown;
+ }
+ }
+
+ if (ptype_mask & ~RTE_PTYPE_ALL_MASK) {
+ ret = -EINVAL;
+ goto ptype_unknown;
+ }
+
+ all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
+ if (all_ptypes == NULL) {
+ ret = 0;
+ goto ptype_unknown;
+ }
+
+ /*
+ * Accodommodate as many set_ptypes as possible. If the supplied
+ * set_ptypes array is insufficient fill it partially.
+ */
+ for (i = 0, j = 0; set_ptypes != NULL &&
+ (all_ptypes[i] != RTE_PTYPE_UNKNOWN); ++i) {
+ if (ptype_mask & all_ptypes[i]) {
+ if (j < num - 1) {
+ set_ptypes[j] = all_ptypes[i];
+ j++;
+ continue;
+ }
+ break;
+ }
+ }
+
+ if (set_ptypes != NULL && j < num)
+ set_ptypes[j] = RTE_PTYPE_UNKNOWN;
+
+ return (*dev->dev_ops->dev_supported_ptypes_set)(dev, ptype_mask);
+
+ptype_unknown:
+ if (num > 0)
+ set_ptypes[0] = RTE_PTYPE_UNKNOWN;
+
+ return ret;
+}
+
void
rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr)
{
@@ -2431,6 +2431,43 @@ int rte_eth_dev_fw_version_get(uint16_t port_id,
*/
int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
uint32_t *ptypes, int num);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Inform Ethernet device of the packet types classification the recipient is
+ * interested in.
+ *
+ * Application can use this function to set only specific ptypes that it's
+ * interested. This information can be used by the PMD to optimize Rx path.
+ *
+ * The function accepts an array `set_ptypes` allocated by the caller to
+ * store the packet types set by the driver, the last element of the array
+ * is set to RTE_PTYPE_UNKNOWN. The size of the `set_ptype` array should be
+ * `rte_eth_dev_get_supported_ptypes() + 1` else it might only be filled
+ * partially.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ptype_mask
+ * The ptype family that application is interested in should be bitwise OR of
+ * RTE_PTYPE_*_MASK or 0.
+ * @param set_ptypes
+ * An array pointer to store set packet types, allocated by caller. The
+ * function marks the end of array with RTE_PTYPE_UNKNOWN.
+ * @param num
+ * Size of the array pointed by param ptypes.
+ * Should be rte_eth_dev_get_supported_ptypes() + 1 to accommodate the
+ * set ptypes.
+ * @return
+ * - (0) if Success.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *ptype_mask* is invalid (or) set_ptypes is NULL and
+ * num > 0.
+ */
+__rte_experimental
+int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+ uint32_t *set_ptypes, unsigned int num);
/**
* Retrieve the MTU of an Ethernet device.
@@ -110,6 +110,23 @@ typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
/**< @internal Get supported ptypes of an Ethernet device. */
+/**
+ * @internal
+ * Inform an Ethernet device about packet types classifications the recipient
+ * is interested in.
+ *
+ * @param dev
+ * The Ethernet device identifier.
+ * @param ptype_mask
+ * The ptype family that application is interested in should be bitwise OR of
+ * RTE_PTYPE_*_MASK or 0.
+ * @return
+ * - (0) if Success.
+ * - (-EINVAL) if *ptype_mask* is invalid.
+ */
+typedef int (*eth_dev_supported_ptypes_set_t)(struct rte_eth_dev *dev,
+ uint32_t ptype_mask);
+
typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
uint16_t queue_id);
/**< @internal Start rx and tx of a queue of an Ethernet device. */
@@ -421,6 +438,8 @@ struct eth_dev_ops {
eth_fw_version_get_t fw_version_get; /**< Get firmware version. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
/**< Get packet types supported and identified by device. */
+ eth_dev_supported_ptypes_set_t dev_supported_ptypes_set;
+ /**< Inform Ethernet device about packet types the recipient is interested in. */
vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
@@ -283,4 +283,7 @@ EXPERIMENTAL {
# added in 19.08
rte_eth_read_clock;
+
+ # added in 19.11
+ rte_eth_dev_set_supported_ptypes;
};