[v9,01/18] net/i40e: i40e support ipn3ke FPGA port bonding
Checks
Commit Message
In ipn3ke, each FPGA network side port bonding to an i40e pf,
each i40e pf link status should get data from FPGA network,
side port. This patch provide bonding relationship.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
---
drivers/net/i40e/base/i40e_type.h | 3 +++
drivers/net/i40e/i40e_ethdev.c | 6 ++++++
drivers/net/i40e/rte_pmd_i40e.c | 21 +++++++++++++++++++++
drivers/net/i40e/rte_pmd_i40e.h | 18 ++++++++++++++++++
drivers/net/i40e/rte_pmd_i40e_version.map | 8 +++++++-
5 files changed, 55 insertions(+), 1 deletion(-)
@@ -660,6 +660,9 @@ struct i40e_hw {
struct i40e_nvm_info nvm;
struct i40e_fc_info fc;
+ /* switch device is used to get link status when i40e is in ipn3ke */
+ struct rte_eth_dev *switch_dev;
+
/* pci info */
u16 device_id;
u16 vendor_id;
@@ -1390,6 +1390,9 @@ static inline void i40e_config_automask(struct i40e_pf *pf)
hw->adapter_stopped = 0;
hw->adapter_closed = 0;
+ /* Init switch device pointer */
+ hw->switch_dev = NULL;
+
/*
* Switch Tag value should not be identical to either the First Tag
* or Second Tag values. So set something other than common Ethertype
@@ -2901,6 +2904,9 @@ void i40e_flex_payload_reg_set_default(struct i40e_hw *hw)
else
update_link_aq(hw, &link, enable_lse, wait_to_complete);
+ if (hw->switch_dev)
+ rte_eth_linkstatus_get(hw->switch_dev, &link);
+
ret = rte_eth_linkstatus_set(dev, &link);
i40e_notify_all_vfs_link_status(dev);
@@ -3207,3 +3207,24 @@ int rte_pmd_i40e_flow_add_del_packet_template(
I40E_WRITE_FLUSH(hw);
return 0;
}
+
+int
+rte_pmd_i40e_set_switch_dev(uint16_t port_id, struct rte_eth_dev *switch_dev)
+{
+ struct rte_eth_dev *i40e_dev;
+ struct i40e_hw *hw;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ i40e_dev = &rte_eth_devices[port_id];
+ if (!is_i40e_supported(i40e_dev))
+ return -ENOTSUP;
+
+ hw = I40E_DEV_PRIVATE_TO_HW(i40e_dev->data->dev_private);
+ if (!hw)
+ return -1;
+
+ hw->switch_dev = switch_dev;
+
+ return 0;
+}
@@ -1061,4 +1061,22 @@ int rte_pmd_i40e_inset_set(uint16_t port, uint8_t pctype,
return 0;
}
+/**
+ * For ipn3ke, i40e works with FPGA.
+ * In this situation, i40e get link status from fpga,
+ * fpga works as switch_dev for i40e.
+ * This function set switch_dev for i40e.
+ *
+ * @param inset
+ * Input set value.
+ * @param field_idx
+ * Field index for input set.
+ * @return
+ * - (less than 0) if failed.
+ * - (0) if success.
+ */
+__rte_experimental
+int
+rte_pmd_i40e_set_switch_dev(uint16_t port_id, struct rte_eth_dev *switch_dev);
+
#endif /* _PMD_I40E_H_ */
@@ -64,4 +64,10 @@ DPDK_18.02 {
rte_pmd_i40e_inset_get;
rte_pmd_i40e_inset_set;
-} DPDK_17.11;
\ No newline at end of file
+} DPDK_17.11;
+
+EXPERIMENTAL {
+ global:
+
+ rte_pmd_i40e_set_switch_dev;
+} DPDK_18.02;
\ No newline at end of file