[v18,05/19] raw/ifpga/base: add device tree support
diff mbox series

Message ID 1573722187-148846-6-git-send-email-rosen.xu@intel.com
State Accepted, archived
Delegated to: xiaolong ye
Headers show
Series
  • add PCIe AER disable and IRQ support for ipn3ke
Related show

Checks

Context Check Description
ci/Intel-compilation success Compilation OK
ci/checkpatch success coding style OK

Commit Message

Xu, Rosen Nov. 14, 2019, 9:02 a.m. UTC
From: Tianfei zhang <tianfei.zhang@intel.com>

In PAC N3000 card, this is a BMC chip which using MAX10 FPGA
to manage the board configuration, like sensors, flash controller,
QSFP, powers. And this is a SPI bus connected between A10 FPGA and
MAX10, we can access the MAX10 registers over this SPI bus.

In BMC, there are about 19 sensors in MAX10 chip, including the FPGA
core temperature, Board temperature, board current, voltage and so on.

We use DTB (Device tree table) to describe it. This DTB file is store
in nor flash partition, which will flashed in Factory when the boards
delivery to customers. And the same time, the customers can easy to
customizate the BMC configuration like change the sensors.

Add device tree support by using libfdt library in Linux distribution.
The end-user should pre-install the libfdt and libfdt-devel package
before use DPDK on PAC N3000 Card.

For Centos 7.x: sudo yum install libfdt libfdt-devel
For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1

To eliminate build error, we currently do not compile raw/ifpga
and net/ipn3ke. User should install libfdt and libfdt-devel first,
modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base,
CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y.
Then this function can work.

Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
---
 config/common_base                        |   2 +-
 config/common_linux                       |   2 +-
 drivers/meson.build                       |   6 +-
 drivers/net/ipn3ke/meson.build            |  24 +++-
 drivers/raw/ifpga/base/meson.build        |   2 +-
 drivers/raw/ifpga/base/opae_intel_max10.c | 183 ++++++++++++++++++++++++++++++
 drivers/raw/ifpga/base/opae_intel_max10.h |  10 ++
 drivers/raw/ifpga/meson.build             |  25 ++--
 mk/rte.app.mk                             |   2 +-
 9 files changed, 235 insertions(+), 21 deletions(-)

Patch
diff mbox series

diff --git a/config/common_base b/config/common_base
index 36ab13d..7c015f9 100644
--- a/config/common_base
+++ b/config/common_base
@@ -347,7 +347,7 @@  CONFIG_RTE_LIBRTE_IAVF_16BYTE_RX_DESC=n
 #
 # Compile burst-oriented IPN3KE PMD driver
 #
-CONFIG_RTE_LIBRTE_IPN3KE_PMD=y
+CONFIG_RTE_LIBRTE_IPN3KE_PMD=n
 
 #
 # Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
diff --git a/config/common_linux b/config/common_linux
index a78b8c6..c5cf3d6 100644
--- a/config/common_linux
+++ b/config/common_linux
@@ -73,4 +73,4 @@  CONFIG_RTE_LIBRTE_HNS3_PMD=y
 # Compile PMD for Intel FPGA raw device
 # To compile, CONFIG_RTE_EAL_VFIO should be enabled.
 #
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
+CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
diff --git a/drivers/meson.build b/drivers/meson.build
index 823e3ef..b7fdfb7 100644
--- a/drivers/meson.build
+++ b/drivers/meson.build
@@ -9,12 +9,12 @@  endif
 dpdk_driver_classes = ['common',
 	       'bus',
 	       'mempool', # depends on common and bus.
-	       'net',     # depends on common, bus and mempool.
+	       'raw',     # depends on common and bus.
+	       'net',     # depends on common, bus, mempool and raw.
 	       'crypto',  # depends on common, bus and mempool (net in future).
 	       'compress', # depends on common, bus, mempool.
 	       'event',   # depends on common, bus, mempool and net.
-	       'baseband', # depends on common and bus.
-	       'raw']     # depends on common, bus, mempool, net and event.
+	       'baseband'] # depends on common and bus.
 
 disabled_drivers = get_option('disable_drivers').split(',')
 
diff --git a/drivers/net/ipn3ke/meson.build b/drivers/net/ipn3ke/meson.build
index 74b4d7c..e3c8a67 100644
--- a/drivers/net/ipn3ke/meson.build
+++ b/drivers/net/ipn3ke/meson.build
@@ -8,10 +8,22 @@ 
 #  rte_eth_dev_destroy()
 #  rte_eth_switch_domain_free()
 #
-allow_experimental_apis = true
 
-sources += files('ipn3ke_ethdev.c',
-	'ipn3ke_representor.c',
-	'ipn3ke_tm.c',
-	'ipn3ke_flow.c')
-deps += ['bus_ifpga', 'sched']
+dep = dependency('libfdt', required: false)
+if not dep.found()
+	dep = cc.find_library('libfdt', required: false)
+endif
+if not dep.found()
+	build = false
+	reason = 'missing dependency, "libfdt"'
+endif
+
+if build
+	allow_experimental_apis = true
+
+	sources += files('ipn3ke_ethdev.c',
+		'ipn3ke_representor.c',
+		'ipn3ke_tm.c',
+		'ipn3ke_flow.c')
+	deps += ['bus_ifpga', 'sched', 'pmd_i40e', 'rawdev', 'rawdev_ifpga']
+endif
diff --git a/drivers/raw/ifpga/base/meson.build b/drivers/raw/ifpga/base/meson.build
index 69f6598..b13e13e 100644
--- a/drivers/raw/ifpga/base/meson.build
+++ b/drivers/raw/ifpga/base/meson.build
@@ -25,5 +25,5 @@  sources = [
 
 base_lib = static_library('ifpga_rawdev_base', sources,
 	dependencies: static_rte_eal,
-	c_args: c_args)
+	c_args: cflags)
 base_objs = base_lib.extract_all_objects()
diff --git a/drivers/raw/ifpga/base/opae_intel_max10.c b/drivers/raw/ifpga/base/opae_intel_max10.c
index 9ed10e2..305baba 100644
--- a/drivers/raw/ifpga/base/opae_intel_max10.c
+++ b/drivers/raw/ifpga/base/opae_intel_max10.c
@@ -3,6 +3,7 @@ 
  */
 
 #include "opae_intel_max10.h"
+#include <libfdt.h>
 
 static struct intel_max10_device *g_max10;
 
@@ -26,6 +27,174 @@  int max10_reg_write(unsigned int reg, unsigned int val)
 			reg, 4, (unsigned char *)&tmp);
 }
 
+static struct max10_compatible_id max10_id_table[] = {
+	{.compatible = MAX10_PAC,},
+	{.compatible = MAX10_PAC_N3000,},
+	{.compatible = MAX10_PAC_END,}
+};
+
+static struct max10_compatible_id *max10_match_compatible(const char *fdt_root)
+{
+	struct max10_compatible_id *id = max10_id_table;
+
+	for (; strcmp(id->compatible, MAX10_PAC_END); id++) {
+		if (fdt_node_check_compatible(fdt_root, 0, id->compatible))
+			continue;
+
+		return id;
+	}
+
+	return NULL;
+}
+
+static inline bool
+is_max10_pac_n3000(struct intel_max10_device *max10)
+{
+	return max10->id && !strcmp(max10->id->compatible,
+			MAX10_PAC_N3000);
+}
+
+static void max10_check_capability(struct intel_max10_device *max10)
+{
+	if (!max10->fdt_root)
+		return;
+
+	if (is_max10_pac_n3000(max10)) {
+		max10->flags |= MAX10_FLAGS_NO_I2C2 |
+				MAX10_FLAGS_NO_BMCIMG_FLASH;
+		dev_info(max10, "found %s card\n", max10->id->compatible);
+	}
+}
+
+static int altera_nor_flash_read(u32 offset,
+		void *buffer, u32 len)
+{
+	int word_len;
+	int i;
+	unsigned int *buf = (unsigned int *)buffer;
+	unsigned int value;
+	int ret;
+
+	if (!buffer || len <= 0)
+		return -ENODEV;
+
+	word_len = len/4;
+
+	for (i = 0; i < word_len; i++) {
+		ret = max10_reg_read(offset + i*4,
+				&value);
+		if (ret)
+			return -EBUSY;
+
+		*buf++ = value;
+	}
+
+	return 0;
+}
+
+static int enable_nor_flash(bool on)
+{
+	unsigned int val = 0;
+	int ret;
+
+	ret = max10_reg_read(RSU_REG_OFF, &val);
+	if (ret) {
+		dev_err(NULL "enabling flash error\n");
+		return ret;
+	}
+
+	if (on)
+		val |= RSU_ENABLE;
+	else
+		val &= ~RSU_ENABLE;
+
+	return max10_reg_write(RSU_REG_OFF, val);
+}
+
+static int init_max10_device_table(struct intel_max10_device *max10)
+{
+	struct max10_compatible_id *id;
+	struct fdt_header hdr;
+	char *fdt_root = NULL;
+
+	u32 dt_size, dt_addr, val;
+	int ret;
+
+	ret = max10_reg_read(DT_AVAIL_REG_OFF, &val);
+	if (ret) {
+		dev_err(max10 "cannot read DT_AVAIL_REG\n");
+		return ret;
+	}
+
+	if (!(val & DT_AVAIL)) {
+		dev_err(max10 "DT not available\n");
+		return -EINVAL;
+	}
+
+	ret = max10_reg_read(DT_BASE_ADDR_REG_OFF, &dt_addr);
+	if (ret) {
+		dev_info(max10 "cannot get base addr of device table\n");
+		return ret;
+	}
+
+	ret = enable_nor_flash(true);
+	if (ret) {
+		dev_err(max10 "fail to enable flash\n");
+		return ret;
+	}
+
+	ret = altera_nor_flash_read(dt_addr, &hdr, sizeof(hdr));
+	if (ret) {
+		dev_err(max10 "read fdt header fail\n");
+		goto done;
+	}
+
+	ret = fdt_check_header(&hdr);
+	if (ret) {
+		dev_err(max10 "check fdt header fail\n");
+		goto done;
+	}
+
+	dt_size = fdt_totalsize(&hdr);
+	if (dt_size > DFT_MAX_SIZE) {
+		dev_err(max10 "invalid device table size\n");
+		ret = -EINVAL;
+		goto done;
+	}
+
+	fdt_root = opae_malloc(dt_size);
+	if (!fdt_root) {
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	ret = altera_nor_flash_read(dt_addr, fdt_root, dt_size);
+	if (ret) {
+		dev_err(max10 "cannot read device table\n");
+		goto done;
+	}
+
+	id = max10_match_compatible(fdt_root);
+	if (!id) {
+		dev_err(max10 "max10 compatible not found\n");
+		ret = -ENODEV;
+		goto done;
+	}
+
+	max10->flags |= MAX10_FLAGS_DEVICE_TABLE;
+
+	max10->id = id;
+	max10->fdt_root = fdt_root;
+
+done:
+	ret = enable_nor_flash(false);
+
+	if (ret && fdt_root)
+		opae_free(fdt_root);
+
+	return ret;
+}
+
 struct intel_max10_device *
 intel_max10_device_probe(struct altera_spi_device *spi,
 		int chipselect)
@@ -49,6 +218,15 @@  struct intel_max10_device *
 	/* set the max10 device firstly */
 	g_max10 = dev;
 
+	/* init the MAX10 device table */
+	ret = init_max10_device_table(dev);
+	if (ret) {
+		dev_err(dev, "init max10 device table fail\n");
+		goto free_dev;
+	}
+
+	max10_check_capability(dev);
+
 	/* read FPGA loading information */
 	ret = max10_reg_read(FPGA_PAGE_INFO_OFF, &val);
 	if (ret) {
@@ -60,6 +238,8 @@  struct intel_max10_device *
 	return dev;
 
 spi_tran_fail:
+	if (dev->fdt_root)
+		opae_free(dev->fdt_root);
 	spi_transaction_remove(dev->spi_tran_dev);
 free_dev:
 	g_max10 = NULL;
@@ -76,6 +256,9 @@  int intel_max10_device_remove(struct intel_max10_device *dev)
 	if (dev->spi_tran_dev)
 		spi_transaction_remove(dev->spi_tran_dev);
 
+	if (dev->fdt_root)
+		opae_free(dev->fdt_root);
+
 	g_max10 = NULL;
 	opae_free(dev);
 
diff --git a/drivers/raw/ifpga/base/opae_intel_max10.h b/drivers/raw/ifpga/base/opae_intel_max10.h
index 08b387e..a52b63e 100644
--- a/drivers/raw/ifpga/base/opae_intel_max10.h
+++ b/drivers/raw/ifpga/base/opae_intel_max10.h
@@ -8,6 +8,14 @@ 
 #include "opae_osdep.h"
 #include "opae_spi.h"
 
+struct max10_compatible_id {
+	char compatible[128];
+};
+
+#define MAX10_PAC	"intel,max10"
+#define MAX10_PAC_N3000	"intel,max10-pac-n3000"
+#define MAX10_PAC_END    "intel,end"
+
 /* max10 capability flags */
 #define MAX10_FLAGS_NO_I2C2		BIT(0)
 #define MAX10_FLAGS_NO_BMCIMG_FLASH	BIT(1)
@@ -20,6 +28,8 @@  struct intel_max10_device {
 	unsigned int flags; /*max10 hardware capability*/
 	struct altera_spi_device *spi_master;
 	struct spi_transaction_dev *spi_tran_dev;
+	struct max10_compatible_id *id; /*max10 compatible*/
+	char *fdt_root;
 };
 
 /* retimer speed */
diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build
index 0ab6fd7..69debff 100644
--- a/drivers/raw/ifpga/meson.build
+++ b/drivers/raw/ifpga/meson.build
@@ -3,18 +3,27 @@ 
 
 version = 1
 
-subdir('base')
-objs = [base_objs]
-
 dep = dependency('libfdt', required: false)
 if not dep.found()
+	dep = cc.find_library('libfdt', required: false)
+endif
+if not dep.found()
 	build = false
 	reason = 'missing dependency, "libfdt"'
 endif
-deps += ['rawdev', 'pci', 'bus_pci', 'kvargs',
-	'bus_vdev', 'bus_ifpga', 'net']
-sources = files('ifpga_rawdev.c')
 
-includes += include_directories('base')
+if build
+	subdir('base')
+	objs = [base_objs]
+
+	deps += ['rawdev', 'pci', 'bus_pci', 'kvargs',
+		'bus_vdev', 'bus_ifpga', 'net']
+	ext_deps += dep
 
-allow_experimental_apis = true
+	sources = files('ifpga_rawdev.c')
+
+	includes += include_directories('base')
+	includes += include_directories('../../net/ipn3ke')
+
+	allow_experimental_apis = true
+endif
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 683e3a4..a278552 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -330,7 +330,7 @@  _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV) += -lrte_rawdev_dpaa2_qdma
 endif # CONFIG_RTE_LIBRTE_FSLMC_BUS
 _LDLIBS-$(CONFIG_RTE_LIBRTE_IFPGA_BUS)      += -lrte_bus_ifpga
 ifeq ($(CONFIG_RTE_LIBRTE_IFPGA_BUS),y)
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV)   += -lrte_rawdev_ifpga
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV)   += -lrte_rawdev_ifpga -lfdt
 _LDLIBS-$(CONFIG_RTE_LIBRTE_IPN3KE_PMD)       += -lrte_pmd_ipn3ke
 endif # CONFIG_RTE_LIBRTE_IFPGA_BUS
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV)   += -lrte_rawdev_ioat