[v2] rte_flow: add eCPRI key fields to flow API
diff mbox series

Message ID 1593672361-285288-1-git-send-email-bingz@mellanox.com
State Superseded, archived
Delegated to: Ferruh Yigit
Headers show
Series
  • [v2] rte_flow: add eCPRI key fields to flow API
Related show

Checks

Context Check Description
ci/Intel-compilation success Compilation OK
ci/iol-testing success Testing PASS
ci/travis-robot success Travis build: passed
ci/iol-mellanox-Performance success Performance Testing PASS
ci/iol-intel-Performance success Performance Testing PASS
ci/iol-broadcom-Performance success Performance Testing PASS
ci/checkpatch success coding style OK

Commit Message

Bing Zhao July 2, 2020, 6:46 a.m. UTC
Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.

eCPRI is a packet based protocol used in the fronthaul interface of
5G networks. Header format definition could be found in the
specification via the link below:
https://www.gigalight.com/downloads/standards/ecpri-specification.pdf

eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.

Signed-off-by: Bing Zhao <bingz@mellanox.com>
---
v2: Add dw0 for the eCPRI common header to switch the endianess, and
    use fixed u32 value with big-endian for rte_flow_item_ecpri_mask.
    It is due to the fact that global variable only support constant
    expression in C when building.
---
 doc/guides/prog_guide/rte_flow.rst |   8 ++
 lib/librte_ethdev/rte_flow.c       |   1 +
 lib/librte_ethdev/rte_flow.h       |  29 +++++++
 lib/librte_net/Makefile            |   1 +
 lib/librte_net/meson.build         |   3 +-
 lib/librte_net/rte_ecpri.h         | 163 +++++++++++++++++++++++++++++++++++++
 lib/librte_net/rte_ether.h         |   1 +
 7 files changed, 205 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_net/rte_ecpri.h

Comments

Ori Kam July 2, 2020, 8:06 a.m. UTC | #1
Hi Bing,

Can you add also testpmd patch?

Thanks,
Ori

> -----Original Message-----
> From: Bing Zhao <bingz@mellanox.com>
> Sent: Thursday, July 2, 2020 9:46 AM
> To: Ori Kam <orika@mellanox.com>; john.mcnamara@intel.com;
> marko.kovacevic@intel.com; Thomas Monjalon <thomas@monjalon.net>;
> ferruh.yigit@intel.com; arybchenko@solarflare.com; olivier.matz@6wind.com
> Cc: dev@dpdk.org
> Subject: [PATCH v2] rte_flow: add eCPRI key fields to flow API
> 
> Add a new item "rte_flow_item_ecpri" in order to match eCRPI header.
> 
> eCPRI is a packet based protocol used in the fronthaul interface of
> 5G networks. Header format definition could be found in the
> specification via the link below:
> https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.giga
> light.com%2Fdownloads%2Fstandards%2Fecpri-
> specification.pdf&amp;data=02%7C01%7Corika%40mellanox.com%7C368410e
> 6bc774bf316ff08d81e539e2e%7Ca652971c7d2e4d9ba6a4d149256f461b%7C0%
> 7C1%7C637292691769606941&amp;sdata=cGZ0vkX%2FD%2FdsPNELatW6LOOs
> r0Cm%2Faf%2F8zV35dkof9M%3D&amp;reserved=0
> 
> eCPRI message can be over Ethernet layer (.1Q supported also) or over
> UDP layer. Message header formats are the same in these two variants.
> 
> Signed-off-by: Bing Zhao <bingz@mellanox.com>
> ---
> v2: Add dw0 for the eCPRI common header to switch the endianess, and
>     use fixed u32 value with big-endian for rte_flow_item_ecpri_mask.
>     It is due to the fact that global variable only support constant
>     expression in C when building.
> ---
>  doc/guides/prog_guide/rte_flow.rst |   8 ++
>  lib/librte_ethdev/rte_flow.c       |   1 +
>  lib/librte_ethdev/rte_flow.h       |  29 +++++++
>  lib/librte_net/Makefile            |   1 +
>  lib/librte_net/meson.build         |   3 +-
>  lib/librte_net/rte_ecpri.h         | 163
> +++++++++++++++++++++++++++++++++++++
>  lib/librte_net/rte_ether.h         |   1 +
>  7 files changed, 205 insertions(+), 1 deletion(-)
>  create mode 100644 lib/librte_net/rte_ecpri.h
> 
> diff --git a/doc/guides/prog_guide/rte_flow.rst
> b/doc/guides/prog_guide/rte_flow.rst
> index d5dd18c..669d519 100644
> --- a/doc/guides/prog_guide/rte_flow.rst
> +++ b/doc/guides/prog_guide/rte_flow.rst
> @@ -1362,6 +1362,14 @@ Matches a PFCP Header.
>  - ``seid``: session endpoint identifier.
>  - Default ``mask`` matches s_field and seid.
> 
> +Item: ``ECPRI``
> +^^^^^^^^^^^^^
> +
> +Matches a eCPRI header.
> +
> +- ``hdr``: eCPRI header definition (``rte_ecpri.h``).
> +- Default ``mask`` matches message type of common header only.
> +
>  Actions
>  ~~~~~~~
> 
> diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
> index 1685be5..f8fdd68 100644
> --- a/lib/librte_ethdev/rte_flow.c
> +++ b/lib/librte_ethdev/rte_flow.c
> @@ -95,6 +95,7 @@ struct rte_flow_desc_data {
>  	MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),
>  	MK_FLOW_ITEM(L2TPV3OIP, sizeof(struct rte_flow_item_l2tpv3oip)),
>  	MK_FLOW_ITEM(PFCP, sizeof(struct rte_flow_item_pfcp)),
> +	MK_FLOW_ITEM(ECPRI, sizeof(struct rte_flow_item_ecpri)),
>  };
> 
>  /** Generate flow_action[] entry. */
> diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
> index b0e4199..216ece7 100644
> --- a/lib/librte_ethdev/rte_flow.h
> +++ b/lib/librte_ethdev/rte_flow.h
> @@ -28,6 +28,7 @@
>  #include <rte_byteorder.h>
>  #include <rte_esp.h>
>  #include <rte_higig.h>
> +#include <rte_ecpri.h>
>  #include <rte_mbuf.h>
>  #include <rte_mbuf_dyn.h>
> 
> @@ -527,6 +528,13 @@ enum rte_flow_item_type {
>  	 */
>  	RTE_FLOW_ITEM_TYPE_PFCP,
> 
> +	/**
> +	 * Matches eCPRI Header.
> +	 * See struct rte_flow_item_ecpri.
> +	 *
> +	 */
> +	RTE_FLOW_ITEM_TYPE_ECPRI,
> +
>  };
> 
>  /**
> @@ -1547,6 +1555,27 @@ struct rte_flow_item_pfcp {
>  #endif
> 
>  /**
> + * @warning
> + * @b EXPERIMENTAL: this structure may change without prior notice
> + *
> + * RTE_FLOW_ITEM_TYPE_ECPRI
> + *
> + * Match eCPRI Header
> + */
> +struct rte_flow_item_ecpri {
> +	struct rte_ecpri_msg_hdr hdr;
> +};
> +
> +/** Default mask for RTE_FLOW_ITEM_TYPE_ECPRI. */
> +#ifndef __cplusplus
> +static const struct rte_flow_item_ecpri rte_flow_item_ecpri_mask = {
> +	.hdr = {
> +		.dw0 = RTE_BE32(0x00ff0000),

I think this should be all zero as default mask.

> +	},
> +};
> +#endif
> +
> +/**
>   * Matching pattern item definition.
>   *
>   * A pattern is formed by stacking items starting from the lowest protocol
> diff --git a/lib/librte_net/Makefile b/lib/librte_net/Makefile
> index aa1d6fe..9830e77 100644
> --- a/lib/librte_net/Makefile
> +++ b/lib/librte_net/Makefile
> @@ -20,5 +20,6 @@ SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include +=
> rte_sctp.h rte_icmp.h rte_arp.h
>  SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h
> rte_net.h
>  SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h rte_mpls.h
> rte_higig.h
>  SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_gtp.h rte_vxlan.h
> +SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ecpri.h
> 
>  include $(RTE_SDK)/mk/rte.lib.mk
> diff --git a/lib/librte_net/meson.build b/lib/librte_net/meson.build
> index f799349..24ed825 100644
> --- a/lib/librte_net/meson.build
> +++ b/lib/librte_net/meson.build
> @@ -15,7 +15,8 @@ headers = files('rte_ip.h',
>  	'rte_net.h',
>  	'rte_net_crc.h',
>  	'rte_mpls.h',
> -	'rte_higig.h')
> +	'rte_higig.h',
> +	'rte_ecpri.h')
> 
>  sources = files('rte_arp.c', 'rte_ether.c', 'rte_net.c', 'rte_net_crc.c')
>  deps += ['mbuf']
> diff --git a/lib/librte_net/rte_ecpri.h b/lib/librte_net/rte_ecpri.h
> new file mode 100644
> index 0000000..31974b2
> --- /dev/null
> +++ b/lib/librte_net/rte_ecpri.h
> @@ -0,0 +1,163 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2020 Mellanox Technologies, Ltd
> + */
> +
> +#ifndef _RTE_ECPRI_H_
> +#define _RTE_ECPRI_H_
> +
> +#include <stdint.h>
> +#include <rte_byteorder.h>
> +
> +#ifdef __cplusplus
> +extern "C" {
> +#endif
> +
> +/**
> + * eCPRI Protocol Revision 1.0, 1.1, 1.2, 2.0: 0001b
> + * Other values are reserved for future
> + */
> +#define RTE_ECPRI_REV_UPTO_20		1
> +
> +/**
> + * eCPRI message types in specifications
> + * IWF* types will only be supported from rev.2
> + */
> +#define RTE_ECPRI_MSG_TYPE_IQ_DATA	0
> +#define RTE_ECPRI_MSG_TYPE_BIT_SEQ	1
> +#define RTE_ECPRI_MSG_TYPE_RTC_CTRL	2
> +#define RTE_ECPRI_MSG_TYPE_GEN_DATA	3
> +#define RTE_ECPRI_MSG_TYPE_RM_ACC	4
> +#define RTE_ECPRI_MSG_TYPE_DLY_MSR	5
> +#define RTE_ECPRI_MSG_TYPE_RMT_RST	6
> +#define RTE_ECPRI_MSG_TYPE_EVT_IND	7
> +#define RTE_ECPRI_MSG_TYPE_IWF_UP	8
> +#define RTE_ECPRI_MSG_TYPE_IWF_OPT	9
> +#define RTE_ECPRI_MSG_TYPE_IWF_MAP	10
> +#define RTE_ECPRI_MSG_TYPE_IWF_DCTRL	11
> +
> +/**
> + * eCPRI Common Header
> + */
> +RTE_STD_C11
> +struct rte_ecpri_common_hdr {
> +#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> +	uint32_t size:16;		/**< Payload Size */
> +	uint32_t type:8;		/**< Message Type */
> +	uint32_t c:1;			/**< Concatenation Indicator */
> +	uint32_t res:3;			/**< Reserved */
> +	uint32_t revision:4;		/**< Protocol Revision */
> +#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> +	uint32_t revision:4;		/**< Protocol Revision */
> +	uint32_t res:3;			/**< Reserved */
> +	uint32_t c:1;			/**< Concatenation Indicator */
> +	uint32_t type:8;		/**< Message Type */
> +	uint32_t size:16;		/**< Payload Size */
> +#endif
> +} __rte_packed;
> +
> +/**
> + * eCPRI Message Header of Type #0: IQ Data
> + */
> +struct rte_ecpri_msg_iq_data {
> +	rte_be16_t pc_id;		/**< Physical channel ID */
> +	rte_be16_t seq_id;		/**< Sequence ID */
> +};
> +
> +/**
> + * eCPRI Message Header of Type #1: Bit Sequence
> + */
> +struct rte_ecpri_msg_bit_seq {
> +	rte_be16_t pc_id;		/**< Physical channel ID */
> +	rte_be16_t seq_id;		/**< Sequence ID */
> +};
> +
> +/**
> + * eCPRI Message Header of Type #2: Real-Time Control Data
> + */
> +struct rte_ecpri_msg_rtc_ctrl {
> +	rte_be16_t rtc_id;		/**< Real-Time Control Data ID */
> +	rte_be16_t seq_id;		/**< Sequence ID */
> +};
> +
> +/**
> + * eCPRI Message Header of Type #3: Generic Data Transfer
> + */
> +struct rte_ecpri_msg_gen_data {
> +	rte_be32_t pc_id;		/**< Physical channel ID */
> +	rte_be32_t seq_id;		/**< Sequence ID */
> +};
> +
> +/**
> + * eCPRI Message Header of Type #4: Remote Memory Access
> + */
> +RTE_STD_C11
> +struct rte_ecpri_msg_rm_access {
> +#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
> +	uint32_t ele_id:16;		/**< Element ID */
> +	uint32_t rr:4;			/**< Req/Resp */
> +	uint32_t rw:4;			/**< Read/Write */
> +	uint32_t rma_id:8;		/**< Remote Memory Access ID */
> +#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
> +	uint32_t rma_id:8;		/**< Remote Memory Access ID */
> +	uint32_t rw:4;			/**< Read/Write */
> +	uint32_t rr:4;			/**< Req/Resp */
> +	uint32_t ele_id:16;		/**< Element ID */
> +#endif
> +	rte_be16_t addr_m;		/**< 48-bits address (16 MSB) */
> +	rte_be32_t addr_l;		/**< 48-bits address (32 LSB) */
> +	rte_be16_t length;		/**< number of bytes */
> +} __rte_packed;
> +
> +/**
> + * eCPRI Message Header of Type #5: One-Way Delay Measurement
> + */
> +struct rte_ecpri_msg_delay_measure {
> +	uint8_t msr_id;			/**< Measurement ID */
> +	uint8_t act_type;		/**< Action Type */
> +};
> +
> +/**
> + * eCPRI Message Header of Type #6: Remote Reset
> + */
> +struct rte_ecpri_msg_remote_reset {
> +	uint8_t msr_id;			/**< Measurement ID */
> +	uint8_t act_type;		/**< Action Type */
> +};
> +
> +/**
> + * eCPRI Message Header of Type #7: Event Indication
> + */
> +struct rte_ecpri_msg_event_ind {
> +	uint8_t evt_id;			/**< Event ID */
> +	uint8_t evt_type;		/**< Event Type */
> +	uint8_t seq;			/**< Sequence Number */
> +	uint8_t number;			/**< Number of Faults/Notif
> */
> +};
> +
> +/**
> + * eCPRI Message Header Format: Common Header + Message Types
> + */
> +RTE_STD_C11
> +struct rte_ecpri_msg_hdr {
> +	union {
> +		struct rte_ecpri_common_hdr common;
> +		uint32_t dw0;
> +	};
> +	union {
> +		struct rte_ecpri_msg_iq_data type0;
> +		struct rte_ecpri_msg_bit_seq type1;
> +		struct rte_ecpri_msg_rtc_ctrl type2;
> +		struct rte_ecpri_msg_bit_seq type3;
> +		struct rte_ecpri_msg_rm_access type4;
> +		struct rte_ecpri_msg_delay_measure type5;
> +		struct rte_ecpri_msg_remote_reset type6;
> +		struct rte_ecpri_msg_event_ind type7;
> +		uint32_t dummy[3];
> +	};
> +};
> +
> +#ifdef __cplusplus
> +}
> +#endif
> +
> +#endif /* _RTE_ECPRI_H_ */
> diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h
> index 0ae4e75..184a3f9 100644
> --- a/lib/librte_net/rte_ether.h
> +++ b/lib/librte_net/rte_ether.h
> @@ -304,6 +304,7 @@ struct rte_vlan_hdr {
>  #define RTE_ETHER_TYPE_LLDP 0x88CC /**< LLDP Protocol. */
>  #define RTE_ETHER_TYPE_MPLS 0x8847 /**< MPLS ethertype. */
>  #define RTE_ETHER_TYPE_MPLSM 0x8848 /**< MPLS multicast ethertype. */
> +#define RTE_ETHER_TYPE_ECPRI 0xAEFE /**< eCPRI ethertype (.1Q
> supported). */
> 
>  /**
>   * Extract VLAN tag information into mbuf
> --
> 1.8.3.1

Patch
diff mbox series

diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index d5dd18c..669d519 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1362,6 +1362,14 @@  Matches a PFCP Header.
 - ``seid``: session endpoint identifier.
 - Default ``mask`` matches s_field and seid.
 
+Item: ``ECPRI``
+^^^^^^^^^^^^^
+
+Matches a eCPRI header.
+
+- ``hdr``: eCPRI header definition (``rte_ecpri.h``).
+- Default ``mask`` matches message type of common header only.
+
 Actions
 ~~~~~~~
 
diff --git a/lib/librte_ethdev/rte_flow.c b/lib/librte_ethdev/rte_flow.c
index 1685be5..f8fdd68 100644
--- a/lib/librte_ethdev/rte_flow.c
+++ b/lib/librte_ethdev/rte_flow.c
@@ -95,6 +95,7 @@  struct rte_flow_desc_data {
 	MK_FLOW_ITEM(HIGIG2, sizeof(struct rte_flow_item_higig2_hdr)),
 	MK_FLOW_ITEM(L2TPV3OIP, sizeof(struct rte_flow_item_l2tpv3oip)),
 	MK_FLOW_ITEM(PFCP, sizeof(struct rte_flow_item_pfcp)),
+	MK_FLOW_ITEM(ECPRI, sizeof(struct rte_flow_item_ecpri)),
 };
 
 /** Generate flow_action[] entry. */
diff --git a/lib/librte_ethdev/rte_flow.h b/lib/librte_ethdev/rte_flow.h
index b0e4199..216ece7 100644
--- a/lib/librte_ethdev/rte_flow.h
+++ b/lib/librte_ethdev/rte_flow.h
@@ -28,6 +28,7 @@ 
 #include <rte_byteorder.h>
 #include <rte_esp.h>
 #include <rte_higig.h>
+#include <rte_ecpri.h>
 #include <rte_mbuf.h>
 #include <rte_mbuf_dyn.h>
 
@@ -527,6 +528,13 @@  enum rte_flow_item_type {
 	 */
 	RTE_FLOW_ITEM_TYPE_PFCP,
 
+	/**
+	 * Matches eCPRI Header.
+	 * See struct rte_flow_item_ecpri.
+	 *
+	 */
+	RTE_FLOW_ITEM_TYPE_ECPRI,
+
 };
 
 /**
@@ -1547,6 +1555,27 @@  struct rte_flow_item_pfcp {
 #endif
 
 /**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice
+ *
+ * RTE_FLOW_ITEM_TYPE_ECPRI
+ *
+ * Match eCPRI Header
+ */
+struct rte_flow_item_ecpri {
+	struct rte_ecpri_msg_hdr hdr;
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_ECPRI. */
+#ifndef __cplusplus
+static const struct rte_flow_item_ecpri rte_flow_item_ecpri_mask = {
+	.hdr = {
+		.dw0 = RTE_BE32(0x00ff0000),
+	},
+};
+#endif
+
+/**
  * Matching pattern item definition.
  *
  * A pattern is formed by stacking items starting from the lowest protocol
diff --git a/lib/librte_net/Makefile b/lib/librte_net/Makefile
index aa1d6fe..9830e77 100644
--- a/lib/librte_net/Makefile
+++ b/lib/librte_net/Makefile
@@ -20,5 +20,6 @@  SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_sctp.h rte_icmp.h rte_arp.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ether.h rte_gre.h rte_net.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_net_crc.h rte_mpls.h rte_higig.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_gtp.h rte_vxlan.h
+SYMLINK-$(CONFIG_RTE_LIBRTE_NET)-include += rte_ecpri.h
 
 include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_net/meson.build b/lib/librte_net/meson.build
index f799349..24ed825 100644
--- a/lib/librte_net/meson.build
+++ b/lib/librte_net/meson.build
@@ -15,7 +15,8 @@  headers = files('rte_ip.h',
 	'rte_net.h',
 	'rte_net_crc.h',
 	'rte_mpls.h',
-	'rte_higig.h')
+	'rte_higig.h',
+	'rte_ecpri.h')
 
 sources = files('rte_arp.c', 'rte_ether.c', 'rte_net.c', 'rte_net_crc.c')
 deps += ['mbuf']
diff --git a/lib/librte_net/rte_ecpri.h b/lib/librte_net/rte_ecpri.h
new file mode 100644
index 0000000..31974b2
--- /dev/null
+++ b/lib/librte_net/rte_ecpri.h
@@ -0,0 +1,163 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#ifndef _RTE_ECPRI_H_
+#define _RTE_ECPRI_H_
+
+#include <stdint.h>
+#include <rte_byteorder.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * eCPRI Protocol Revision 1.0, 1.1, 1.2, 2.0: 0001b
+ * Other values are reserved for future
+ */
+#define RTE_ECPRI_REV_UPTO_20		1
+
+/**
+ * eCPRI message types in specifications
+ * IWF* types will only be supported from rev.2
+ */
+#define RTE_ECPRI_MSG_TYPE_IQ_DATA	0
+#define RTE_ECPRI_MSG_TYPE_BIT_SEQ	1
+#define RTE_ECPRI_MSG_TYPE_RTC_CTRL	2
+#define RTE_ECPRI_MSG_TYPE_GEN_DATA	3
+#define RTE_ECPRI_MSG_TYPE_RM_ACC	4
+#define RTE_ECPRI_MSG_TYPE_DLY_MSR	5
+#define RTE_ECPRI_MSG_TYPE_RMT_RST	6
+#define RTE_ECPRI_MSG_TYPE_EVT_IND	7
+#define RTE_ECPRI_MSG_TYPE_IWF_UP	8
+#define RTE_ECPRI_MSG_TYPE_IWF_OPT	9
+#define RTE_ECPRI_MSG_TYPE_IWF_MAP	10
+#define RTE_ECPRI_MSG_TYPE_IWF_DCTRL	11
+
+/**
+ * eCPRI Common Header
+ */
+RTE_STD_C11
+struct rte_ecpri_common_hdr {
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+	uint32_t size:16;		/**< Payload Size */
+	uint32_t type:8;		/**< Message Type */
+	uint32_t c:1;			/**< Concatenation Indicator */
+	uint32_t res:3;			/**< Reserved */
+	uint32_t revision:4;		/**< Protocol Revision */
+#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	uint32_t revision:4;		/**< Protocol Revision */
+	uint32_t res:3;			/**< Reserved */
+	uint32_t c:1;			/**< Concatenation Indicator */
+	uint32_t type:8;		/**< Message Type */
+	uint32_t size:16;		/**< Payload Size */
+#endif
+} __rte_packed;
+
+/**
+ * eCPRI Message Header of Type #0: IQ Data
+ */
+struct rte_ecpri_msg_iq_data {
+	rte_be16_t pc_id;		/**< Physical channel ID */
+	rte_be16_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #1: Bit Sequence
+ */
+struct rte_ecpri_msg_bit_seq {
+	rte_be16_t pc_id;		/**< Physical channel ID */
+	rte_be16_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #2: Real-Time Control Data
+ */
+struct rte_ecpri_msg_rtc_ctrl {
+	rte_be16_t rtc_id;		/**< Real-Time Control Data ID */
+	rte_be16_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #3: Generic Data Transfer
+ */
+struct rte_ecpri_msg_gen_data {
+	rte_be32_t pc_id;		/**< Physical channel ID */
+	rte_be32_t seq_id;		/**< Sequence ID */
+};
+
+/**
+ * eCPRI Message Header of Type #4: Remote Memory Access
+ */
+RTE_STD_C11
+struct rte_ecpri_msg_rm_access {
+#if RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
+	uint32_t ele_id:16;		/**< Element ID */
+	uint32_t rr:4;			/**< Req/Resp */
+	uint32_t rw:4;			/**< Read/Write */
+	uint32_t rma_id:8;		/**< Remote Memory Access ID */
+#elif RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	uint32_t rma_id:8;		/**< Remote Memory Access ID */
+	uint32_t rw:4;			/**< Read/Write */
+	uint32_t rr:4;			/**< Req/Resp */
+	uint32_t ele_id:16;		/**< Element ID */
+#endif
+	rte_be16_t addr_m;		/**< 48-bits address (16 MSB) */
+	rte_be32_t addr_l;		/**< 48-bits address (32 LSB) */
+	rte_be16_t length;		/**< number of bytes */
+} __rte_packed;
+
+/**
+ * eCPRI Message Header of Type #5: One-Way Delay Measurement
+ */
+struct rte_ecpri_msg_delay_measure {
+	uint8_t msr_id;			/**< Measurement ID */
+	uint8_t act_type;		/**< Action Type */
+};
+
+/**
+ * eCPRI Message Header of Type #6: Remote Reset
+ */
+struct rte_ecpri_msg_remote_reset {
+	uint8_t msr_id;			/**< Measurement ID */
+	uint8_t act_type;		/**< Action Type */
+};
+
+/**
+ * eCPRI Message Header of Type #7: Event Indication
+ */
+struct rte_ecpri_msg_event_ind {
+	uint8_t evt_id;			/**< Event ID */
+	uint8_t evt_type;		/**< Event Type */
+	uint8_t seq;			/**< Sequence Number */
+	uint8_t number;			/**< Number of Faults/Notif */
+};
+
+/**
+ * eCPRI Message Header Format: Common Header + Message Types
+ */
+RTE_STD_C11
+struct rte_ecpri_msg_hdr {
+	union {
+		struct rte_ecpri_common_hdr common;
+		uint32_t dw0;
+	};
+	union {
+		struct rte_ecpri_msg_iq_data type0;
+		struct rte_ecpri_msg_bit_seq type1;
+		struct rte_ecpri_msg_rtc_ctrl type2;
+		struct rte_ecpri_msg_bit_seq type3;
+		struct rte_ecpri_msg_rm_access type4;
+		struct rte_ecpri_msg_delay_measure type5;
+		struct rte_ecpri_msg_remote_reset type6;
+		struct rte_ecpri_msg_event_ind type7;
+		uint32_t dummy[3];
+	};
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ECPRI_H_ */
diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h
index 0ae4e75..184a3f9 100644
--- a/lib/librte_net/rte_ether.h
+++ b/lib/librte_net/rte_ether.h
@@ -304,6 +304,7 @@  struct rte_vlan_hdr {
 #define RTE_ETHER_TYPE_LLDP 0x88CC /**< LLDP Protocol. */
 #define RTE_ETHER_TYPE_MPLS 0x8847 /**< MPLS ethertype. */
 #define RTE_ETHER_TYPE_MPLSM 0x8848 /**< MPLS multicast ethertype. */
+#define RTE_ETHER_TYPE_ECPRI 0xAEFE /**< eCPRI ethertype (.1Q supported). */
 
 /**
  * Extract VLAN tag information into mbuf