From: Ciara Power <ciara.power@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
---
doc/guides/rawdevs/dpaa2_cmdif.rst | 21 ---------------------
doc/guides/rawdevs/dpaa2_qdma.rst | 21 ---------------------
doc/guides/rawdevs/ifpga.rst | 10 ----------
doc/guides/rawdevs/ioat.rst | 8 +-------
doc/guides/rawdevs/ntb.rst | 6 ------
doc/guides/rawdevs/octeontx2_dma.rst | 12 ------------
doc/guides/rawdevs/octeontx2_ep.rst | 8 --------
7 files changed, 1 insertion(+), 85 deletions(-)
@@ -44,17 +44,6 @@ Currently supported by DPDK:
Some part of fslmc bus code (mc flib - object library) routines are
dual licensed (BSD & GPLv2).
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV`` (default ``y``)
-
- Toggle compilation of the ``lrte_pmd_dpaa2_cmdif`` driver.
Enabling logs
-------------
@@ -68,16 +57,6 @@ For enabling logs, use the following EAL parameter:
Using ``pmd.raw.dpaa2.cmdif`` as log matching criteria, all Event PMD logs can be
enabled which are lower than logging ``level``.
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the DPAA2 CMDIF PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
- cd <DPDK-source-directory>
- make config T=arm64-dpaa-linux-gcc install
Initialization
--------------
@@ -48,17 +48,6 @@ Currently supported by DPDK:
Some part of fslmc bus code (mc flib - object library) routines are
dual licensed (BSD & GPLv2).
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV`` (default ``y``)
-
- Toggle compilation of the ``lrte_pmd_dpaa2_qdma`` driver.
Enabling logs
-------------
@@ -72,16 +61,6 @@ For enabling logs, use the following EAL parameter:
Using ``pmd.raw.dpaa2.qdma`` as log matching criteria, all Event PMD logs can be
enabled which are lower than logging ``level``.
-Driver Compilation
-~~~~~~~~~~~~~~~~~~
-
-To compile the DPAA2 QDMA PMD for Linux arm64 gcc target, run the
-following ``make`` command:
-
-.. code-block:: console
-
- cd <DPDK-source-directory>
- make config T=arm64-dpaa-linux-gcc install
Initialization
--------------
@@ -76,16 +76,6 @@ summarized by the following block diagram::
| vdev_ifpga_cfg driver | | Intel FpgaDev |
+------------------------------------+ +-----------------+
-Build options
--------------
-
-- ``CONFIG_RTE_LIBRTE_IFPGA_BUS`` (default ``y``)
-
- Toggle compilation of IFPGA Bus library.
-
-- ``CONFIG_RTE_LIBRTE_IFPGA_RAWDEV`` (default ``y``)
-
- Toggle compilation of the ``ifpga_rawdev`` driver.
Run-time parameters
-------------------
@@ -54,13 +54,7 @@ shows:
Compilation
------------
-For builds done with ``make``, the driver compilation is enabled by the
-``CONFIG_RTE_LIBRTE_PMD_IOAT_RAWDEV`` build configuration option. This is
-enabled by default in builds for x86 platforms, and disabled in other
-configurations.
-
-For builds using ``meson`` and ``ninja``, the driver will be built when the
-target platform is x86-based.
+The driver will be built when the target platform is x86-based.
Device Setup
-------------
@@ -30,12 +30,6 @@ is https://www.intel.com/content/dam/support/us/en/documents/server-products/Int
- Disable PCIe PII SSC (Spread Spectrum Clocking) for both hosts. This
is a hardware requirement.
-Build Options
--------------
-
-- ``CONFIG_RTE_LIBRTE_PMD_NTB_RAWDEV`` (default ``y``)
-
- Toggle compilation of the ``ntb`` driver.
Device Setup
------------
@@ -26,18 +26,6 @@ Prerequisites and Compilation procedure
See :doc:`../platform/octeontx2` for setup information.
-Pre-Installation Configuration
-------------------------------
-
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_DMA_RAWDEV`` (default ``y``)
-
- Toggle compilation of the ``lrte_pmd_octeontx2_dma`` driver.
-
Enabling logs
-------------
@@ -18,14 +18,6 @@ This OCTEON TX2 End Point mode PMD supports
#. Packet Output - OCTEON TX2 to Host with info pointer mode.
-Config File Options
-~~~~~~~~~~~~~~~~~~~
-
-The following options can be modified in the ``config`` file.
-
-- ``CONFIG_RTE_LIBRTE_PMD_OCTEONTX2_EP_RAWDEV`` (default ``y``)
-
- Toggle compilation of the ``lrte_pmd_octeontx2_ep`` driver.
Initialization
--------------