@@ -55,6 +55,16 @@ New Features
Also, make sure to start the actual text at the margin.
=======================================================
+* **Added the FEC API, for a generic FEC query and config.**
+
+ Added the FEC API which provides functions for query FEC capabilities and
+ current FEC mode from device. Also, API for configuring FEC mode is also provided.
+
+* **Added hns3 FEC PMD, for supporting query and config FEC mode.**
+
+ Added the FEC PMD which provides functions for query FEC capabilities and
+ current FEC mode from device. Also, PMD for configuring FEC mode is also provided.
+
Removed Items
-------------
@@ -3642,6 +3642,55 @@ rte_eth_led_off(uint16_t port_id)
return eth_err(port_id, (*dev->dev_ops->dev_led_off)(dev));
}
+int
+rte_eth_fec_get_capability(uint16_t port_id, uint32_t *fec_cap)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get_capability, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->fec_get_capability)(dev,
+ fec_cap));
+}
+
+int
+rte_eth_fec_get(uint16_t port_id, enum rte_eth_fec_mode *mode)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_get, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->fec_get)(dev, mode));
+}
+
+int
+rte_eth_fec_set(uint16_t port_id, enum rte_eth_fec_mode mode)
+{
+ struct rte_eth_dev *dev;
+ uint32_t fec_mode_mask;
+ int ret;
+
+ ret = rte_eth_fec_get_capability(port_id, &fec_mode_mask);
+ if (ret != 0)
+ return ret;
+
+ /*
+ * Check whether the configured mode is within the FEC capability.
+ * If not, the configured mode will not be supported.
+ */
+ if (!(fec_mode_mask & (1U << (uint32_t)mode))) {
+ RTE_ETHDEV_LOG(ERR, "unsupported FEC mode = %d, port_id = %u\n",
+ mode, port_id);
+ return -EINVAL;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fec_set, -ENOTSUP);
+ return eth_err(port_id, (*dev->dev_ops->fec_set)(dev, mode));
+}
+
/*
* Returns index into MAC address array of addr. Use 00:00:00:00:00:00 to find
* an empty spot.
@@ -1511,6 +1511,25 @@ struct rte_eth_dcb_info {
struct rte_eth_dcb_tc_queue_mapping tc_queue;
};
+/**
+ * This enum indicates the possible (forward error correction)FEC modes
+ * of an ethdev port.
+ */
+enum rte_eth_fec_mode {
+ RTE_ETH_FEC_NOFEC = 0, /**< FEC is off */
+ RTE_ETH_FEC_BASER, /**< FEC using common algorithm */
+ RTE_ETH_FEC_RS, /**< FEC using RS algorithm */
+ RTE_ETH_FEC_AUTO, /**< FEC autonegotiation modes */
+ RTE_ETH_FEC_NUM
+};
+
+/* This indicates FEC capabilities */
+#define RTE_ETH_FEC_CAPA_NOFEC (1U << RTE_ETH_FEC_NOFEC)
+#define RTE_ETH_FEC_CAPA_BASER (1U << RTE_ETH_FEC_BASER)
+#define RTE_ETH_FEC_CAPA_RS (1U << RTE_ETH_FEC_RS)
+#define RTE_ETH_FEC_CAPA_AUTO (1U << RTE_ETH_FEC_AUTO)
+
+
#define RTE_ETH_ALL RTE_MAX_ETHPORTS
/* Macros to check for valid port */
@@ -3328,6 +3347,70 @@ int rte_eth_led_on(uint16_t port_id);
int rte_eth_led_off(uint16_t port_id);
/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fec_cap
+ * returns the FEC capability from the device, as follows:
+ * RTE_ETH_FEC_CAPA_NOFEC
+ * RTE_ETH_FEC_CAPA_BASER
+ * RTE_ETH_FEC_CAPA_RS
+ * RTE_ETH_FEC_CAPA_AUTO
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * that operation.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get_capability(uint16_t port_id, uint32_t *fec_cap);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Get current Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mode
+ * returns the FEC mode from the device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * that operation.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_get(uint16_t port_id, enum rte_eth_fec_mode *mode);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change, or be removed, without prior notice
+ *
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mode
+ * the FEC mode.
+ * @return
+ * - (0) if successful.
+ * - (-EINVAL) if the FEC mode is not valid.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support.
+ * - (-EIO) if device is removed.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+__rte_experimental
+int rte_eth_fec_set(uint16_t port_id, enum rte_eth_fec_mode mode);
+
+/**
* Get current status of the Ethernet link flow control for Ethernet device
*
* @param port_id
@@ -604,6 +604,78 @@ typedef int (*eth_tx_hairpin_queue_setup_t)
const struct rte_eth_hairpin_conf *hairpin_conf);
/**
+ * @internal
+ * Get Forward Error Correction(FEC) capability.
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param fec_cap
+ * returns the FEC capability from the device.
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, get FEC success.
+ * @retval -ENOTSUP
+ * operation is not supported.
+ * @retval -EIO
+ * device is removed.
+ * @retval -ENODEV
+ * Device is gone.
+ */
+typedef int (*eth_fec_get_capability_t)(struct rte_eth_dev *dev,
+ uint32_t *fec_cap);
+
+/**
+ * @internal
+ * Get Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param mode
+ * returns the FEC mode from the device.
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, get FEC success.
+ * @retval -ENOTSUP
+ * operation is not supported.
+ * @retval -EIO
+ * device is removed.
+ * @retval -ENODEV
+ * Device is gone.
+ */
+typedef int (*eth_fec_get_t)(struct rte_eth_dev *dev,
+ enum rte_eth_fec_mode *mode);
+
+/**
+ * @internal
+ * Set Forward Error Correction(FEC) mode.
+ *
+ * @param dev
+ * ethdev handle of port.
+ * @param mode
+ * the FEC mode.
+ *
+ * @return
+ * Negative errno value on error, 0 on success.
+ *
+ * @retval 0
+ * Success, set FEC success.
+ * @retval -ENOTSUP
+ * operation is not supported.
+ * @retval -EIO
+ * device is removed.
+ * @retval -ENODEV
+ * Device is gone.
+ */
+typedef int (*eth_fec_set_t)(struct rte_eth_dev *dev,
+ enum rte_eth_fec_mode mode);
+
+/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
struct eth_dev_ops {
@@ -752,6 +823,13 @@ struct eth_dev_ops {
/**< Set up device RX hairpin queue. */
eth_tx_hairpin_queue_setup_t tx_hairpin_queue_setup;
/**< Set up device TX hairpin queue. */
+
+ eth_fec_get_capability_t fec_get_capability;
+ /**< Get Forward Error Correction(FEC) capability; */
+ eth_fec_get_t fec_get;
+ /**< Get Forward Error Correction(FEC) mode; */
+ eth_fec_set_t fec_set;
+ /**< Set Forward Error Correction(FEC) mode; */
};
/**
@@ -239,6 +239,11 @@ EXPERIMENTAL {
__rte_ethdev_trace_rx_burst;
__rte_ethdev_trace_tx_burst;
rte_flow_get_aged_flows;
+
+ # added in 20.11
+ rte_eth_fec_get_capability;
+ rte_eth_fec_get;
+ rte_eth_fec_set;
};
INTERNAL {