[v5,7/7] app/bbdev: update offload test to dequeue full ring
Checks
Commit Message
update offload dequeue to retrieve the full ring to be
agnostic of implementation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
---
app/test-bbdev/test_bbdev_perf.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
Comments
On 10/23/20 4:43 PM, Nicolas Chautru wrote:
> update offload dequeue to retrieve the full ring to be
> agnostic of implementation.
>
> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
> Acked-by: Dave Burley <dave.burley@accelercomm.com>
> ---
> app/test-bbdev/test_bbdev_perf.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/app/test-bbdev/test_bbdev_perf.c b/app/test-bbdev/test_bbdev_perf.c
> index b5dc536..a6884c5 100644
> --- a/app/test-bbdev/test_bbdev_perf.c
> +++ b/app/test-bbdev/test_bbdev_perf.c
> @@ -4463,8 +4463,8 @@ typedef int (test_case_function)(struct active_device *ad,
> /* Dequeue one operation */
This comment and similar need to change, not doing just 1 anymore
> do {
> deq += rte_bbdev_dequeue_dec_ops(dev_id, queue_id,
> - &ops_deq[deq], 1);
> - } while (unlikely(deq != 1));
> + &ops_deq[deq], enq);
> + } while (unlikely(deq == 0));
This check looks wrong, should likely be (deq != enq)
Similar below
Tom
>
> deq_last_time = rte_rdtsc_precise() - deq_start_time;
> time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
> @@ -4554,8 +4554,8 @@ typedef int (test_case_function)(struct active_device *ad,
> /* Dequeue one operation */
> do {
> deq += rte_bbdev_dequeue_ldpc_dec_ops(dev_id, queue_id,
> - &ops_deq[deq], 1);
> - } while (unlikely(deq != 1));
> + &ops_deq[deq], enq);
> + } while (unlikely(deq == 0));
>
> deq_last_time = rte_rdtsc_precise() - deq_start_time;
> time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
> @@ -4642,8 +4642,8 @@ typedef int (test_case_function)(struct active_device *ad,
> /* Dequeue one operation */
> do {
> deq += rte_bbdev_dequeue_enc_ops(dev_id, queue_id,
> - &ops_deq[deq], 1);
> - } while (unlikely(deq != 1));
> + &ops_deq[deq], enq);
> + } while (unlikely(deq == 0));
>
> deq_last_time = rte_rdtsc_precise() - deq_start_time;
> time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
> @@ -4725,8 +4725,8 @@ typedef int (test_case_function)(struct active_device *ad,
> /* Dequeue one operation */
> do {
> deq += rte_bbdev_dequeue_ldpc_enc_ops(dev_id, queue_id,
> - &ops_deq[deq], 1);
> - } while (unlikely(deq != 1));
> + &ops_deq[deq], enq);
> + } while (unlikely(deq == 0));
>
> deq_last_time = rte_rdtsc_precise() - deq_start_time;
> time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
> -----Original Message-----
> From: Tom Rix <trix@redhat.com>
> Sent: Monday, October 26, 2020 6:56 AM
> To: Chautru, Nicolas <nicolas.chautru@intel.com>; dev@dpdk.org;
> akhil.goyal@nxp.com
> Cc: david.marchand@redhat.com
> Subject: Re: [PATCH v5 7/7] app/bbdev: update offload test to dequeue full
> ring
>
>
> On 10/23/20 4:43 PM, Nicolas Chautru wrote:
> > update offload dequeue to retrieve the full ring to be agnostic of
> > implementation.
> >
> > Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
> > Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
> > Acked-by: Dave Burley <dave.burley@accelercomm.com>
> > ---
> > app/test-bbdev/test_bbdev_perf.c | 16 ++++++++--------
> > 1 file changed, 8 insertions(+), 8 deletions(-)
> >
> > diff --git a/app/test-bbdev/test_bbdev_perf.c
> > b/app/test-bbdev/test_bbdev_perf.c
> > index b5dc536..a6884c5 100644
> > --- a/app/test-bbdev/test_bbdev_perf.c
> > +++ b/app/test-bbdev/test_bbdev_perf.c
> > @@ -4463,8 +4463,8 @@ typedef int (test_case_function)(struct
> active_device *ad,
> > /* Dequeue one operation */
> This comment and similar need to change, not doing just 1 anymore
We still just need one operation dequeued to be considered done.
> > do {
> > deq += rte_bbdev_dequeue_dec_ops(dev_id,
> queue_id,
> > - &ops_deq[deq], 1);
> > - } while (unlikely(deq != 1));
> > + &ops_deq[deq], enq);
> > + } while (unlikely(deq == 0));
>
> This check looks wrong, should likely be (deq != enq)
>
> Similar below
No that is intentional. Not waiting for everything to be done but purely the first dequeue. If not this would be run multiple times.
The rest of ring is dequeued below.
>
> Tom
>
> >
> > deq_last_time = rte_rdtsc_precise() - deq_start_time;
> > time_st->deq_max_time = RTE_MAX(time_st-
> >deq_max_time, @@ -4554,8
> > +4554,8 @@ typedef int (test_case_function)(struct active_device *ad,
> > /* Dequeue one operation */
> > do {
> > deq += rte_bbdev_dequeue_ldpc_dec_ops(dev_id,
> queue_id,
> > - &ops_deq[deq], 1);
> > - } while (unlikely(deq != 1));
> > + &ops_deq[deq], enq);
> > + } while (unlikely(deq == 0));
> >
> > deq_last_time = rte_rdtsc_precise() - deq_start_time;
> > time_st->deq_max_time = RTE_MAX(time_st-
> >deq_max_time, @@ -4642,8
> > +4642,8 @@ typedef int (test_case_function)(struct active_device *ad,
> > /* Dequeue one operation */
> > do {
> > deq += rte_bbdev_dequeue_enc_ops(dev_id,
> queue_id,
> > - &ops_deq[deq], 1);
> > - } while (unlikely(deq != 1));
> > + &ops_deq[deq], enq);
> > + } while (unlikely(deq == 0));
> >
> > deq_last_time = rte_rdtsc_precise() - deq_start_time;
> > time_st->deq_max_time = RTE_MAX(time_st-
> >deq_max_time, @@ -4725,8
> > +4725,8 @@ typedef int (test_case_function)(struct active_device *ad,
> > /* Dequeue one operation */
> > do {
> > deq += rte_bbdev_dequeue_ldpc_enc_ops(dev_id,
> queue_id,
> > - &ops_deq[deq], 1);
> > - } while (unlikely(deq != 1));
> > + &ops_deq[deq], enq);
> > + } while (unlikely(deq == 0));
> >
> > deq_last_time = rte_rdtsc_precise() - deq_start_time;
> > time_st->deq_max_time = RTE_MAX(time_st-
> >deq_max_time,
On 10/26/20 9:27 AM, Chautru, Nicolas wrote:
>> -----Original Message-----
>> From: Tom Rix <trix@redhat.com>
>> Sent: Monday, October 26, 2020 6:56 AM
>> To: Chautru, Nicolas <nicolas.chautru@intel.com>; dev@dpdk.org;
>> akhil.goyal@nxp.com
>> Cc: david.marchand@redhat.com
>> Subject: Re: [PATCH v5 7/7] app/bbdev: update offload test to dequeue full
>> ring
>>
>>
>> On 10/23/20 4:43 PM, Nicolas Chautru wrote:
>>> update offload dequeue to retrieve the full ring to be agnostic of
>>> implementation.
>>>
>>> Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
>>> Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
>>> Acked-by: Dave Burley <dave.burley@accelercomm.com>
>>> ---
>>> app/test-bbdev/test_bbdev_perf.c | 16 ++++++++--------
>>> 1 file changed, 8 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/app/test-bbdev/test_bbdev_perf.c
>>> b/app/test-bbdev/test_bbdev_perf.c
>>> index b5dc536..a6884c5 100644
>>> --- a/app/test-bbdev/test_bbdev_perf.c
>>> +++ b/app/test-bbdev/test_bbdev_perf.c
>>> @@ -4463,8 +4463,8 @@ typedef int (test_case_function)(struct
>> active_device *ad,
>>> /* Dequeue one operation */
>> This comment and similar need to change, not doing just 1 anymore
> We still just need one operation dequeued to be considered done.
>
>>> do {
>>> deq += rte_bbdev_dequeue_dec_ops(dev_id,
>> queue_id,
>>> - &ops_deq[deq], 1);
>>> - } while (unlikely(deq != 1));
>>> + &ops_deq[deq], enq);
>>> + } while (unlikely(deq == 0));
>> This check looks wrong, should likely be (deq != enq)
>>
>> Similar below
> No that is intentional. Not waiting for everything to be done but purely the first dequeue. If not this would be run multiple times.
> The rest of ring is dequeued below.
So is > 1 an error condition or ok?
Maybe add a comment that it is really ok because the call logic is not setup for 1 but for enq
Tom
>
>> Tom
>>
>>> deq_last_time = rte_rdtsc_precise() - deq_start_time;
>>> time_st->deq_max_time = RTE_MAX(time_st-
>>> deq_max_time, @@ -4554,8
>>> +4554,8 @@ typedef int (test_case_function)(struct active_device *ad,
>>> /* Dequeue one operation */
>>> do {
>>> deq += rte_bbdev_dequeue_ldpc_dec_ops(dev_id,
>> queue_id,
>>> - &ops_deq[deq], 1);
>>> - } while (unlikely(deq != 1));
>>> + &ops_deq[deq], enq);
>>> + } while (unlikely(deq == 0));
>>>
>>> deq_last_time = rte_rdtsc_precise() - deq_start_time;
>>> time_st->deq_max_time = RTE_MAX(time_st-
>>> deq_max_time, @@ -4642,8
>>> +4642,8 @@ typedef int (test_case_function)(struct active_device *ad,
>>> /* Dequeue one operation */
>>> do {
>>> deq += rte_bbdev_dequeue_enc_ops(dev_id,
>> queue_id,
>>> - &ops_deq[deq], 1);
>>> - } while (unlikely(deq != 1));
>>> + &ops_deq[deq], enq);
>>> + } while (unlikely(deq == 0));
>>>
>>> deq_last_time = rte_rdtsc_precise() - deq_start_time;
>>> time_st->deq_max_time = RTE_MAX(time_st-
>>> deq_max_time, @@ -4725,8
>>> +4725,8 @@ typedef int (test_case_function)(struct active_device *ad,
>>> /* Dequeue one operation */
>>> do {
>>> deq += rte_bbdev_dequeue_ldpc_enc_ops(dev_id,
>> queue_id,
>>> - &ops_deq[deq], 1);
>>> - } while (unlikely(deq != 1));
>>> + &ops_deq[deq], enq);
>>> + } while (unlikely(deq == 0));
>>>
>>> deq_last_time = rte_rdtsc_precise() - deq_start_time;
>>> time_st->deq_max_time = RTE_MAX(time_st-
>>> deq_max_time,
@@ -4463,8 +4463,8 @@ typedef int (test_case_function)(struct active_device *ad,
/* Dequeue one operation */
do {
deq += rte_bbdev_dequeue_dec_ops(dev_id, queue_id,
- &ops_deq[deq], 1);
- } while (unlikely(deq != 1));
+ &ops_deq[deq], enq);
+ } while (unlikely(deq == 0));
deq_last_time = rte_rdtsc_precise() - deq_start_time;
time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
@@ -4554,8 +4554,8 @@ typedef int (test_case_function)(struct active_device *ad,
/* Dequeue one operation */
do {
deq += rte_bbdev_dequeue_ldpc_dec_ops(dev_id, queue_id,
- &ops_deq[deq], 1);
- } while (unlikely(deq != 1));
+ &ops_deq[deq], enq);
+ } while (unlikely(deq == 0));
deq_last_time = rte_rdtsc_precise() - deq_start_time;
time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
@@ -4642,8 +4642,8 @@ typedef int (test_case_function)(struct active_device *ad,
/* Dequeue one operation */
do {
deq += rte_bbdev_dequeue_enc_ops(dev_id, queue_id,
- &ops_deq[deq], 1);
- } while (unlikely(deq != 1));
+ &ops_deq[deq], enq);
+ } while (unlikely(deq == 0));
deq_last_time = rte_rdtsc_precise() - deq_start_time;
time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,
@@ -4725,8 +4725,8 @@ typedef int (test_case_function)(struct active_device *ad,
/* Dequeue one operation */
do {
deq += rte_bbdev_dequeue_ldpc_enc_ops(dev_id, queue_id,
- &ops_deq[deq], 1);
- } while (unlikely(deq != 1));
+ &ops_deq[deq], enq);
+ } while (unlikely(deq == 0));
deq_last_time = rte_rdtsc_precise() - deq_start_time;
time_st->deq_max_time = RTE_MAX(time_st->deq_max_time,