diff --git a/lib/core/librte_mempool/Makefile b/lib/core/librte_mempool/Makefile
new file mode 100644
index 0000000..9939e10
--- /dev/null
+++ b/lib/core/librte_mempool/Makefile
@@ -0,0 +1,51 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_mempool.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) +=  rte_mempool.c
+ifeq ($(CONFIG_RTE_LIBRTE_XEN_DOM0),y)
+SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) +=  rte_dom0_mempool.c
+endif
+# install includes
+SYMLINK-$(CONFIG_RTE_LIBRTE_MEMPOOL)-include := rte_mempool.h
+
+# this lib needs eal, rte_ring and rte_malloc
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += lib/librte_eal lib/librte_ring
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += lib/librte_malloc
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/core/librte_mempool/rte_dom0_mempool.c b/lib/core/librte_mempool/rte_dom0_mempool.c
new file mode 100644
index 0000000..9ec68fb
--- /dev/null
+++ b/lib/core/librte_mempool/rte_dom0_mempool.c
@@ -0,0 +1,134 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <stdarg.h>
+#include <inttypes.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_atomic.h>
+#include <rte_launch.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_eal_memconfig.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_ring.h>
+#include <rte_errno.h>
+#include <rte_string_fns.h>
+#include <rte_spinlock.h>
+
+#include "rte_mempool.h"
+
+static void
+get_phys_map(void *va, phys_addr_t pa[], uint32_t pg_num,
+            uint32_t pg_sz, uint32_t memseg_id)
+{
+    uint32_t i;
+    uint64_t virt_addr, mfn_id;
+    struct rte_mem_config *mcfg;
+    uint32_t page_size = getpagesize();
+
+    /* get pointer to global configuration */
+    mcfg = rte_eal_get_configuration()->mem_config;
+    virt_addr =(uintptr_t) mcfg->memseg[memseg_id].addr;
+
+    for (i = 0; i != pg_num; i++) {
+        mfn_id = ((uintptr_t)va + i * pg_sz - virt_addr) / RTE_PGSIZE_2M;
+        pa[i] = mcfg->memseg[memseg_id].mfn[mfn_id] * page_size;
+    }
+}
+
+/* create the mempool for supporting Dom0 */
+struct rte_mempool *
+rte_dom0_mempool_create(const char *name, unsigned elt_num, unsigned elt_size,
+           unsigned cache_size, unsigned private_data_size,
+           rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+           rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+           int socket_id, unsigned flags)
+{
+	struct rte_mempool *mp = NULL;
+	phys_addr_t *pa;
+	char *va;
+	size_t sz;
+	uint32_t pg_num, pg_shift, pg_sz, total_size;
+	const struct rte_memzone *mz;
+	char mz_name[RTE_MEMZONE_NAMESIZE];
+	int mz_flags = RTE_MEMZONE_1GB|RTE_MEMZONE_SIZE_HINT_ONLY;
+
+	pg_sz = RTE_PGSIZE_2M;
+
+	pg_shift = rte_bsf32(pg_sz);
+	total_size = rte_mempool_calc_obj_size(elt_size, flags, NULL);
+
+	/* calc max memory size and max number of pages needed. */
+	sz = rte_mempool_xmem_size(elt_num, total_size, pg_shift) +
+		RTE_PGSIZE_2M;
+	pg_num = sz >> pg_shift;
+
+	/* extract physical mappings of the allocated memory. */
+	pa = calloc(pg_num, sizeof (*pa));
+	if (pa == NULL)
+		return mp;
+
+	snprintf(mz_name, sizeof(mz_name), RTE_MEMPOOL_OBJ_NAME, name);
+	mz = rte_memzone_reserve(mz_name, sz, socket_id, mz_flags);
+	if (mz == NULL) {
+		free(pa);
+		return mp;
+	}
+
+	va = (char *)RTE_ALIGN_CEIL((uintptr_t)mz->addr, RTE_PGSIZE_2M);
+	/* extract physical mappings of the allocated memory. */
+	get_phys_map(va, pa, pg_num, pg_sz, mz->memseg_id);
+
+	mp = rte_mempool_xmem_create(name, elt_num, elt_size,
+		cache_size, private_data_size,
+		mp_init, mp_init_arg,
+		obj_init, obj_init_arg,
+		socket_id, flags, va, pa, pg_num, pg_shift);
+
+	free(pa);
+
+	return (mp);
+}
diff --git a/lib/core/librte_mempool/rte_mempool.c b/lib/core/librte_mempool/rte_mempool.c
new file mode 100644
index 0000000..4cf6c25
--- /dev/null
+++ b/lib/core/librte_mempool/rte_mempool.c
@@ -0,0 +1,901 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+#include <rte_atomic.h>
+#include <rte_launch.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_eal_memconfig.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_ring.h>
+#include <rte_errno.h>
+#include <rte_string_fns.h>
+#include <rte_spinlock.h>
+
+#include "rte_mempool.h"
+
+TAILQ_HEAD(rte_mempool_list, rte_tailq_entry);
+
+#define CACHE_FLUSHTHRESH_MULTIPLIER 1.5
+
+/*
+ * return the greatest common divisor between a and b (fast algorithm)
+ *
+ */
+static unsigned get_gcd(unsigned a, unsigned b)
+{
+	unsigned c;
+
+	if (0 == a)
+		return b;
+	if (0 == b)
+		return a;
+
+	if (a < b) {
+		c = a;
+		a = b;
+		b = c;
+	}
+
+	while (b != 0) {
+		c = a % b;
+		a = b;
+		b = c;
+	}
+
+	return a;
+}
+
+/*
+ * Depending on memory configuration, objects addresses are spread
+ * between channels and ranks in RAM: the pool allocator will add
+ * padding between objects. This function return the new size of the
+ * object.
+ */
+static unsigned optimize_object_size(unsigned obj_size)
+{
+	unsigned nrank, nchan;
+	unsigned new_obj_size;
+
+	/* get number of channels */
+	nchan = rte_memory_get_nchannel();
+	if (nchan == 0)
+		nchan = 1;
+
+	nrank = rte_memory_get_nrank();
+	if (nrank == 0)
+		nrank = 1;
+
+	/* process new object size */
+	new_obj_size = (obj_size + RTE_CACHE_LINE_MASK) / RTE_CACHE_LINE_SIZE;
+	while (get_gcd(new_obj_size, nrank * nchan) != 1)
+		new_obj_size++;
+	return new_obj_size * RTE_CACHE_LINE_SIZE;
+}
+
+static void
+mempool_add_elem(struct rte_mempool *mp, void *obj, uint32_t obj_idx,
+	rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg)
+{
+	struct rte_mempool **mpp;
+
+	obj = (char *)obj + mp->header_size;
+
+	/* set mempool ptr in header */
+	mpp = __mempool_from_obj(obj);
+	*mpp = mp;
+
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	__mempool_write_header_cookie(obj, 1);
+	__mempool_write_trailer_cookie(obj);
+#endif
+	/* call the initializer */
+	if (obj_init)
+		obj_init(mp, obj_init_arg, obj, obj_idx);
+
+	/* enqueue in ring */
+	rte_ring_sp_enqueue(mp->ring, obj);
+}
+
+uint32_t
+rte_mempool_obj_iter(void *vaddr, uint32_t elt_num, size_t elt_sz, size_t align,
+	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
+	rte_mempool_obj_iter_t obj_iter, void *obj_iter_arg)
+{
+	uint32_t i, j, k;
+	uint32_t pgn;
+	uintptr_t end, start, va;
+	uintptr_t pg_sz;
+
+	pg_sz = (uintptr_t)1 << pg_shift;
+	va = (uintptr_t)vaddr;
+
+	i = 0;
+	j = 0;
+
+	while (i != elt_num && j != pg_num) {
+
+		start = RTE_ALIGN_CEIL(va, align);
+		end = start + elt_sz;
+
+		pgn = (end >> pg_shift) - (start >> pg_shift);
+		pgn += j;
+
+		/* do we have enough space left for the next element. */
+		if (pgn >= pg_num)
+			break;
+
+		for (k = j;
+				k != pgn &&
+				paddr[k] + pg_sz == paddr[k + 1];
+				k++)
+			;
+
+		/*
+		 * if next pgn chunks of memory physically continuous,
+		 * use it to create next element.
+		 * otherwise, just skip that chunk unused.
+		 */
+		if (k == pgn) {
+			if (obj_iter != NULL)
+				obj_iter(obj_iter_arg, (void *)start,
+					(void *)end, i);
+			va = end;
+			j = pgn;
+			i++;
+		} else {
+			va = RTE_ALIGN_CEIL((va + 1), pg_sz);
+			j++;
+		}
+	}
+
+	return (i);
+}
+
+/*
+ * Populate  mempool with the objects.
+ */
+
+struct mempool_populate_arg {
+	struct rte_mempool     *mp;
+	rte_mempool_obj_ctor_t *obj_init;
+	void                   *obj_init_arg;
+};
+
+static void
+mempool_obj_populate(void *arg, void *start, void *end, uint32_t idx)
+{
+	struct mempool_populate_arg *pa = arg;
+
+	mempool_add_elem(pa->mp, start, idx, pa->obj_init, pa->obj_init_arg);
+	pa->mp->elt_va_end = (uintptr_t)end;
+}
+
+static void
+mempool_populate(struct rte_mempool *mp, size_t num, size_t align,
+	rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg)
+{
+	uint32_t elt_sz;
+	struct mempool_populate_arg arg;
+
+	elt_sz = mp->elt_size + mp->header_size + mp->trailer_size;
+	arg.mp = mp;
+	arg.obj_init = obj_init;
+	arg.obj_init_arg = obj_init_arg;
+
+	mp->size = rte_mempool_obj_iter((void *)mp->elt_va_start,
+		num, elt_sz, align,
+		mp->elt_pa, mp->pg_num, mp->pg_shift,
+		mempool_obj_populate, &arg);
+}
+
+uint32_t
+rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags,
+	struct rte_mempool_objsz *sz)
+{
+	struct rte_mempool_objsz lsz;
+
+	sz = (sz != NULL) ? sz : &lsz;
+
+	/*
+	 * In header, we have at least the pointer to the pool, and
+	 * optionaly a 64 bits cookie.
+	 */
+	sz->header_size = 0;
+	sz->header_size += sizeof(struct rte_mempool *); /* ptr to pool */
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	sz->header_size += sizeof(uint64_t); /* cookie */
+#endif
+	if ((flags & MEMPOOL_F_NO_CACHE_ALIGN) == 0)
+		sz->header_size = RTE_ALIGN_CEIL(sz->header_size,
+			RTE_CACHE_LINE_SIZE);
+
+	/* trailer contains the cookie in debug mode */
+	sz->trailer_size = 0;
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	sz->trailer_size += sizeof(uint64_t); /* cookie */
+#endif
+	/* element size is 8 bytes-aligned at least */
+	sz->elt_size = RTE_ALIGN_CEIL(elt_size, sizeof(uint64_t));
+
+	/* expand trailer to next cache line */
+	if ((flags & MEMPOOL_F_NO_CACHE_ALIGN) == 0) {
+		sz->total_size = sz->header_size + sz->elt_size +
+			sz->trailer_size;
+		sz->trailer_size += ((RTE_CACHE_LINE_SIZE -
+				  (sz->total_size & RTE_CACHE_LINE_MASK)) &
+				 RTE_CACHE_LINE_MASK);
+	}
+
+	/*
+	 * increase trailer to add padding between objects in order to
+	 * spread them across memory channels/ranks
+	 */
+	if ((flags & MEMPOOL_F_NO_SPREAD) == 0) {
+		unsigned new_size;
+		new_size = optimize_object_size(sz->header_size + sz->elt_size +
+			sz->trailer_size);
+		sz->trailer_size = new_size - sz->header_size - sz->elt_size;
+	}
+
+	if (! rte_eal_has_hugepages()) {
+		/*
+		 * compute trailer size so that pool elements fit exactly in
+		 * a standard page
+		 */
+		int page_size = getpagesize();
+		int new_size = page_size - sz->header_size - sz->elt_size;
+		if (new_size < 0 || (unsigned int)new_size < sz->trailer_size) {
+			printf("When hugepages are disabled, pool objects "
+			       "can't exceed PAGE_SIZE: %d + %d + %d > %d\n",
+			       sz->header_size, sz->elt_size, sz->trailer_size,
+			       page_size);
+			return 0;
+		}
+		sz->trailer_size = new_size;
+	}
+
+	/* this is the size of an object, including header and trailer */
+	sz->total_size = sz->header_size + sz->elt_size + sz->trailer_size;
+
+	return (sz->total_size);
+}
+
+
+/*
+ * Calculate maximum amount of memory required to store given number of objects.
+ */
+size_t
+rte_mempool_xmem_size(uint32_t elt_num, size_t elt_sz, uint32_t pg_shift)
+{
+	size_t n, pg_num, pg_sz, sz;
+
+	pg_sz = (size_t)1 << pg_shift;
+
+	if ((n = pg_sz / elt_sz) > 0) {
+		pg_num = (elt_num + n - 1) / n;
+		sz = pg_num << pg_shift;
+	} else {
+		sz = RTE_ALIGN_CEIL(elt_sz, pg_sz) * elt_num;
+	}
+
+	return (sz);
+}
+
+/*
+ * Calculate how much memory would be actually required with the
+ * given memory footprint to store required number of elements.
+ */
+static void
+mempool_lelem_iter(void *arg, __rte_unused void *start, void *end,
+        __rte_unused uint32_t idx)
+{
+        *(uintptr_t *)arg = (uintptr_t)end;
+}
+
+ssize_t
+rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, size_t elt_sz,
+	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift)
+{
+	uint32_t n;
+	uintptr_t va, uv;
+	size_t pg_sz, usz;
+
+	pg_sz = (size_t)1 << pg_shift;
+	va = (uintptr_t)vaddr;
+	uv = va;
+
+	if ((n = rte_mempool_obj_iter(vaddr, elt_num, elt_sz, 1,
+			paddr, pg_num, pg_shift, mempool_lelem_iter,
+			&uv)) != elt_num) {
+		return (-n);
+	}
+
+	uv = RTE_ALIGN_CEIL(uv, pg_sz);
+	usz = uv - va;
+	return (usz);
+}
+
+/* create the mempool */
+struct rte_mempool *
+rte_mempool_create(const char *name, unsigned n, unsigned elt_size,
+		   unsigned cache_size, unsigned private_data_size,
+		   rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+		   rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+		   int socket_id, unsigned flags)
+{
+#ifdef RTE_LIBRTE_XEN_DOM0
+	return (rte_dom0_mempool_create(name, n, elt_size,
+		cache_size, private_data_size,
+		mp_init, mp_init_arg,
+		obj_init, obj_init_arg,
+		socket_id, flags));
+#else
+	return (rte_mempool_xmem_create(name, n, elt_size,
+		cache_size, private_data_size,
+		mp_init, mp_init_arg,
+		obj_init, obj_init_arg,
+		socket_id, flags,
+		NULL, NULL, MEMPOOL_PG_NUM_DEFAULT, MEMPOOL_PG_SHIFT_MAX));
+#endif
+}
+
+/*
+ * Create the mempool over already allocated chunk of memory.
+ * That external memory buffer can consists of physically disjoint pages.
+ * Setting vaddr to NULL, makes mempool to fallback to original behaviour
+ * and allocate space for mempool and it's elements as one big chunk of
+ * physically continuos memory.
+ * */
+struct rte_mempool *
+rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
+		unsigned cache_size, unsigned private_data_size,
+		rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+		rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+		int socket_id, unsigned flags, void *vaddr,
+		const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift)
+{
+	char mz_name[RTE_MEMZONE_NAMESIZE];
+	char rg_name[RTE_RING_NAMESIZE];
+	struct rte_mempool *mp = NULL;
+	struct rte_tailq_entry *te;
+	struct rte_ring *r;
+	const struct rte_memzone *mz;
+	size_t mempool_size;
+	int mz_flags = RTE_MEMZONE_1GB|RTE_MEMZONE_SIZE_HINT_ONLY;
+	int rg_flags = 0;
+	void *obj;
+	struct rte_mempool_objsz objsz;
+	void *startaddr;
+	int page_size = getpagesize();
+
+	/* compilation-time checks */
+	RTE_BUILD_BUG_ON((sizeof(struct rte_mempool) &
+			  RTE_CACHE_LINE_MASK) != 0);
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	RTE_BUILD_BUG_ON((sizeof(struct rte_mempool_cache) &
+			  RTE_CACHE_LINE_MASK) != 0);
+	RTE_BUILD_BUG_ON((offsetof(struct rte_mempool, local_cache) &
+			  RTE_CACHE_LINE_MASK) != 0);
+#endif
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	RTE_BUILD_BUG_ON((sizeof(struct rte_mempool_debug_stats) &
+			  RTE_CACHE_LINE_MASK) != 0);
+	RTE_BUILD_BUG_ON((offsetof(struct rte_mempool, stats) &
+			  RTE_CACHE_LINE_MASK) != 0);
+#endif
+
+	/* check that we have an initialised tail queue */
+	if (RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL,
+			rte_mempool_list) == NULL) {
+		rte_errno = E_RTE_NO_TAILQ;
+		return NULL;
+	}
+
+	/* asked cache too big */
+	if (cache_size > RTE_MEMPOOL_CACHE_MAX_SIZE) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	/* check that we have both VA and PA */
+	if (vaddr != NULL && paddr == NULL) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	/* Check that pg_num and pg_shift parameters are valid. */
+	if (pg_num < RTE_DIM(mp->elt_pa) || pg_shift > MEMPOOL_PG_SHIFT_MAX) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	/* "no cache align" imply "no spread" */
+	if (flags & MEMPOOL_F_NO_CACHE_ALIGN)
+		flags |= MEMPOOL_F_NO_SPREAD;
+
+	/* ring flags */
+	if (flags & MEMPOOL_F_SP_PUT)
+		rg_flags |= RING_F_SP_ENQ;
+	if (flags & MEMPOOL_F_SC_GET)
+		rg_flags |= RING_F_SC_DEQ;
+
+	/* calculate mempool object sizes. */
+	if (!rte_mempool_calc_obj_size(elt_size, flags, &objsz)) {
+		rte_errno = EINVAL;
+		return NULL;
+	}
+
+	rte_rwlock_write_lock(RTE_EAL_MEMPOOL_RWLOCK);
+
+	/* allocate the ring that will be used to store objects */
+	/* Ring functions will return appropriate errors if we are
+	 * running as a secondary process etc., so no checks made
+	 * in this function for that condition */
+	snprintf(rg_name, sizeof(rg_name), RTE_MEMPOOL_MZ_FORMAT, name);
+	r = rte_ring_create(rg_name, rte_align32pow2(n+1), socket_id, rg_flags);
+	if (r == NULL)
+		goto exit;
+
+	/*
+	 * reserve a memory zone for this mempool: private data is
+	 * cache-aligned
+	 */
+	private_data_size = (private_data_size +
+			     RTE_CACHE_LINE_MASK) & (~RTE_CACHE_LINE_MASK);
+
+	if (! rte_eal_has_hugepages()) {
+		/*
+		 * expand private data size to a whole page, so that the
+		 * first pool element will start on a new standard page
+		 */
+		int head = sizeof(struct rte_mempool);
+		int new_size = (private_data_size + head) % page_size;
+		if (new_size) {
+			private_data_size += page_size - new_size;
+		}
+	}
+
+	/* try to allocate tailq entry */
+	te = rte_zmalloc("MEMPOOL_TAILQ_ENTRY", sizeof(*te), 0);
+	if (te == NULL) {
+		RTE_LOG(ERR, MEMPOOL, "Cannot allocate tailq entry!\n");
+		goto exit;
+	}
+
+	/*
+	 * If user provided an external memory buffer, then use it to
+	 * store mempool objects. Otherwise reserve memzone big enough to
+	 * hold mempool header and metadata plus mempool objects.
+	 */
+	mempool_size = MEMPOOL_HEADER_SIZE(mp, pg_num) + private_data_size;
+	if (vaddr == NULL)
+		mempool_size += (size_t)objsz.total_size * n;
+
+	if (! rte_eal_has_hugepages()) {
+		/*
+		 * we want the memory pool to start on a page boundary,
+		 * because pool elements crossing page boundaries would
+		 * result in discontiguous physical addresses
+		 */
+		mempool_size += page_size;
+	}
+
+	snprintf(mz_name, sizeof(mz_name), RTE_MEMPOOL_MZ_FORMAT, name);
+
+	mz = rte_memzone_reserve(mz_name, mempool_size, socket_id, mz_flags);
+
+	/*
+	 * no more memory: in this case we loose previously reserved
+	 * space for the as we cannot free it
+	 */
+	if (mz == NULL) {
+		rte_free(te);
+		goto exit;
+	}
+
+	if (rte_eal_has_hugepages()) {
+		startaddr = (void*)mz->addr;
+	} else {
+		/* align memory pool start address on a page boundary */
+		unsigned long addr = (unsigned long)mz->addr;
+		if (addr & (page_size - 1)) {
+			addr += page_size;
+			addr &= ~(page_size - 1);
+		}
+		startaddr = (void*)addr;
+	}
+
+	/* init the mempool structure */
+	mp = startaddr;
+	memset(mp, 0, sizeof(*mp));
+	snprintf(mp->name, sizeof(mp->name), "%s", name);
+	mp->phys_addr = mz->phys_addr;
+	mp->ring = r;
+	mp->size = n;
+	mp->flags = flags;
+	mp->elt_size = objsz.elt_size;
+	mp->header_size = objsz.header_size;
+	mp->trailer_size = objsz.trailer_size;
+	mp->cache_size = cache_size;
+	mp->cache_flushthresh = (uint32_t)
+		(cache_size * CACHE_FLUSHTHRESH_MULTIPLIER);
+	mp->private_data_size = private_data_size;
+
+	/* calculate address of the first element for continuous mempool. */
+	obj = (char *)mp + MEMPOOL_HEADER_SIZE(mp, pg_num) +
+		private_data_size;
+
+	/* populate address translation fields. */
+	mp->pg_num = pg_num;
+	mp->pg_shift = pg_shift;
+	mp->pg_mask = RTE_LEN2MASK(mp->pg_shift, typeof(mp->pg_mask));
+
+	/* mempool elements allocated together with mempool */
+	if (vaddr == NULL) {
+		mp->elt_va_start = (uintptr_t)obj;
+		mp->elt_pa[0] = mp->phys_addr +
+			(mp->elt_va_start - (uintptr_t)mp);
+
+	/* mempool elements in a separate chunk of memory. */
+	} else {
+		mp->elt_va_start = (uintptr_t)vaddr;
+		memcpy(mp->elt_pa, paddr, sizeof (mp->elt_pa[0]) * pg_num);
+	}
+
+	mp->elt_va_end = mp->elt_va_start;
+
+	/* call the initializer */
+	if (mp_init)
+		mp_init(mp, mp_init_arg);
+
+	mempool_populate(mp, n, 1, obj_init, obj_init_arg);
+
+	te->data = (void *) mp;
+
+	RTE_EAL_TAILQ_INSERT_TAIL(RTE_TAILQ_MEMPOOL, rte_mempool_list, te);
+
+exit:
+	rte_rwlock_write_unlock(RTE_EAL_MEMPOOL_RWLOCK);
+
+	return mp;
+}
+
+/* Return the number of entries in the mempool */
+unsigned
+rte_mempool_count(const struct rte_mempool *mp)
+{
+	unsigned count;
+
+	count = rte_ring_count(mp->ring);
+
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	{
+		unsigned lcore_id;
+		if (mp->cache_size == 0)
+			return count;
+
+		for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
+			count += mp->local_cache[lcore_id].len;
+	}
+#endif
+
+	/*
+	 * due to race condition (access to len is not locked), the
+	 * total can be greater than size... so fix the result
+	 */
+	if (count > mp->size)
+		return mp->size;
+	return count;
+}
+
+/* dump the cache status */
+static unsigned
+rte_mempool_dump_cache(FILE *f, const struct rte_mempool *mp)
+{
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	unsigned lcore_id;
+	unsigned count = 0;
+	unsigned cache_count;
+
+	fprintf(f, "  cache infos:\n");
+	fprintf(f, "    cache_size=%"PRIu32"\n", mp->cache_size);
+	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+		cache_count = mp->local_cache[lcore_id].len;
+		fprintf(f, "    cache_count[%u]=%u\n", lcore_id, cache_count);
+		count += cache_count;
+	}
+	fprintf(f, "    total_cache_count=%u\n", count);
+	return count;
+#else
+	RTE_SET_USED(mp);
+	fprintf(f, "  cache disabled\n");
+	return 0;
+#endif
+}
+
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+/* check cookies before and after objects */
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic ignored "-Wcast-qual"
+#endif
+
+struct mempool_audit_arg {
+	const struct rte_mempool *mp;
+	uintptr_t obj_end;
+	uint32_t obj_num;
+};
+
+static void
+mempool_obj_audit(void *arg, void *start, void *end, uint32_t idx)
+{
+	struct mempool_audit_arg *pa = arg;
+	void *obj;
+
+	obj = (char *)start + pa->mp->header_size;
+	pa->obj_end = (uintptr_t)end;
+	pa->obj_num = idx + 1;
+	__mempool_check_cookies(pa->mp, &obj, 1, 2);
+}
+
+static void
+mempool_audit_cookies(const struct rte_mempool *mp)
+{
+	uint32_t elt_sz, num;
+	struct mempool_audit_arg arg;
+
+	elt_sz = mp->elt_size + mp->header_size + mp->trailer_size;
+
+	arg.mp = mp;
+	arg.obj_end = mp->elt_va_start;
+	arg.obj_num = 0;
+
+	num = rte_mempool_obj_iter((void *)mp->elt_va_start,
+		mp->size, elt_sz, 1,
+		mp->elt_pa, mp->pg_num, mp->pg_shift,
+		mempool_obj_audit, &arg);
+
+	if (num != mp->size) {
+			rte_panic("rte_mempool_obj_iter(mempool=%p, size=%u) "
+			"iterated only over %u elements\n",
+			mp, mp->size, num);
+	} else if (arg.obj_end != mp->elt_va_end || arg.obj_num != mp->size) {
+			rte_panic("rte_mempool_obj_iter(mempool=%p, size=%u) "
+			"last callback va_end: %#tx (%#tx expeceted), "
+			"num of objects: %u (%u expected)\n",
+			mp, mp->size,
+			arg.obj_end, mp->elt_va_end,
+			arg.obj_num, mp->size);
+	}
+}
+
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic error "-Wcast-qual"
+#endif
+#else
+#define mempool_audit_cookies(mp) do {} while(0)
+#endif
+
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+/* check cookies before and after objects */
+static void
+mempool_audit_cache(const struct rte_mempool *mp)
+{
+	/* check cache size consistency */
+	unsigned lcore_id;
+	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+		if (mp->local_cache[lcore_id].len > mp->cache_flushthresh) {
+			RTE_LOG(CRIT, MEMPOOL, "badness on cache[%u]\n",
+				lcore_id);
+			rte_panic("MEMPOOL: invalid cache len\n");
+		}
+	}
+}
+#else
+#define mempool_audit_cache(mp) do {} while(0)
+#endif
+
+
+/* check the consistency of mempool (size, cookies, ...) */
+void
+rte_mempool_audit(const struct rte_mempool *mp)
+{
+	mempool_audit_cache(mp);
+	mempool_audit_cookies(mp);
+
+	/* For case where mempool DEBUG is not set, and cache size is 0 */
+	RTE_SET_USED(mp);
+}
+
+/* dump the status of the mempool on the console */
+void
+rte_mempool_dump(FILE *f, const struct rte_mempool *mp)
+{
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	struct rte_mempool_debug_stats sum;
+	unsigned lcore_id;
+#endif
+	unsigned common_count;
+	unsigned cache_count;
+
+	RTE_VERIFY(f != NULL);
+	RTE_VERIFY(mp != NULL);
+
+	fprintf(f, "mempool <%s>@%p\n", mp->name, mp);
+	fprintf(f, "  flags=%x\n", mp->flags);
+	fprintf(f, "  ring=<%s>@%p\n", mp->ring->name, mp->ring);
+	fprintf(f, "  phys_addr=0x%" PRIx64 "\n", mp->phys_addr);
+	fprintf(f, "  size=%"PRIu32"\n", mp->size);
+	fprintf(f, "  header_size=%"PRIu32"\n", mp->header_size);
+	fprintf(f, "  elt_size=%"PRIu32"\n", mp->elt_size);
+	fprintf(f, "  trailer_size=%"PRIu32"\n", mp->trailer_size);
+	fprintf(f, "  total_obj_size=%"PRIu32"\n",
+	       mp->header_size + mp->elt_size + mp->trailer_size);
+
+	fprintf(f, "  private_data_size=%"PRIu32"\n", mp->private_data_size);
+	fprintf(f, "  pg_num=%"PRIu32"\n", mp->pg_num);
+	fprintf(f, "  pg_shift=%"PRIu32"\n", mp->pg_shift);
+	fprintf(f, "  pg_mask=%#tx\n", mp->pg_mask);
+	fprintf(f, "  elt_va_start=%#tx\n", mp->elt_va_start);
+	fprintf(f, "  elt_va_end=%#tx\n", mp->elt_va_end);
+	fprintf(f, "  elt_pa[0]=0x%" PRIx64 "\n", mp->elt_pa[0]);
+
+	if (mp->size != 0)
+		fprintf(f, "  avg bytes/object=%#Lf\n",
+			(long double)(mp->elt_va_end - mp->elt_va_start) /
+			mp->size);
+
+	cache_count = rte_mempool_dump_cache(f, mp);
+	common_count = rte_ring_count(mp->ring);
+	if ((cache_count + common_count) > mp->size)
+		common_count = mp->size - cache_count;
+	fprintf(f, "  common_pool_count=%u\n", common_count);
+
+	/* sum and dump statistics */
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	memset(&sum, 0, sizeof(sum));
+	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+		sum.put_bulk += mp->stats[lcore_id].put_bulk;
+		sum.put_objs += mp->stats[lcore_id].put_objs;
+		sum.get_success_bulk += mp->stats[lcore_id].get_success_bulk;
+		sum.get_success_objs += mp->stats[lcore_id].get_success_objs;
+		sum.get_fail_bulk += mp->stats[lcore_id].get_fail_bulk;
+		sum.get_fail_objs += mp->stats[lcore_id].get_fail_objs;
+	}
+	fprintf(f, "  stats:\n");
+	fprintf(f, "    put_bulk=%"PRIu64"\n", sum.put_bulk);
+	fprintf(f, "    put_objs=%"PRIu64"\n", sum.put_objs);
+	fprintf(f, "    get_success_bulk=%"PRIu64"\n", sum.get_success_bulk);
+	fprintf(f, "    get_success_objs=%"PRIu64"\n", sum.get_success_objs);
+	fprintf(f, "    get_fail_bulk=%"PRIu64"\n", sum.get_fail_bulk);
+	fprintf(f, "    get_fail_objs=%"PRIu64"\n", sum.get_fail_objs);
+#else
+	fprintf(f, "  no statistics available\n");
+#endif
+
+	rte_mempool_audit(mp);
+}
+
+/* dump the status of all mempools on the console */
+void
+rte_mempool_list_dump(FILE *f)
+{
+	const struct rte_mempool *mp = NULL;
+	struct rte_tailq_entry *te;
+	struct rte_mempool_list *mempool_list;
+
+	if ((mempool_list =
+	     RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL, rte_mempool_list)) == NULL) {
+		rte_errno = E_RTE_NO_TAILQ;
+		return;
+	}
+
+	rte_rwlock_read_lock(RTE_EAL_MEMPOOL_RWLOCK);
+
+	TAILQ_FOREACH(te, mempool_list, next) {
+		mp = (struct rte_mempool *) te->data;
+		rte_mempool_dump(f, mp);
+	}
+
+	rte_rwlock_read_unlock(RTE_EAL_MEMPOOL_RWLOCK);
+}
+
+/* search a mempool from its name */
+struct rte_mempool *
+rte_mempool_lookup(const char *name)
+{
+	struct rte_mempool *mp = NULL;
+	struct rte_tailq_entry *te;
+	struct rte_mempool_list *mempool_list;
+
+	if ((mempool_list =
+	     RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL, rte_mempool_list)) == NULL) {
+		rte_errno = E_RTE_NO_TAILQ;
+		return NULL;
+	}
+
+	rte_rwlock_read_lock(RTE_EAL_MEMPOOL_RWLOCK);
+
+	TAILQ_FOREACH(te, mempool_list, next) {
+		mp = (struct rte_mempool *) te->data;
+		if (strncmp(name, mp->name, RTE_MEMPOOL_NAMESIZE) == 0)
+			break;
+	}
+
+	rte_rwlock_read_unlock(RTE_EAL_MEMPOOL_RWLOCK);
+
+	if (te == NULL) {
+		rte_errno = ENOENT;
+		return NULL;
+	}
+
+	return mp;
+}
+
+void rte_mempool_walk(void (*func)(const struct rte_mempool *, void *),
+		      void *arg)
+{
+	struct rte_tailq_entry *te = NULL;
+	struct rte_mempool_list *mempool_list;
+
+	if ((mempool_list =
+	     RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL, rte_mempool_list)) == NULL) {
+		rte_errno = E_RTE_NO_TAILQ;
+		return;
+	}
+
+	rte_rwlock_read_lock(RTE_EAL_MEMPOOL_RWLOCK);
+
+	TAILQ_FOREACH(te, mempool_list, next) {
+		(*func)((struct rte_mempool *) te->data, arg);
+	}
+
+	rte_rwlock_read_unlock(RTE_EAL_MEMPOOL_RWLOCK);
+}
diff --git a/lib/core/librte_mempool/rte_mempool.h b/lib/core/librte_mempool/rte_mempool.h
new file mode 100644
index 0000000..3314651
--- /dev/null
+++ b/lib/core/librte_mempool/rte_mempool.h
@@ -0,0 +1,1392 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_MEMPOOL_H_
+#define _RTE_MEMPOOL_H_
+
+/**
+ * @file
+ * RTE Mempool.
+ *
+ * A memory pool is an allocator of fixed-size object. It is
+ * identified by its name, and uses a ring to store free objects. It
+ * provides some other optional services, like a per-core object
+ * cache, and an alignment helper to ensure that objects are padded
+ * to spread them equally on all RAM channels, ranks, and so on.
+ *
+ * Objects owned by a mempool should never be added in another
+ * mempool. When an object is freed using rte_mempool_put() or
+ * equivalent, the object data is not modified; the user can save some
+ * meta-data in the object data and retrieve them when allocating a
+ * new object.
+ *
+ * Note: the mempool implementation is not preemptable. A lcore must
+ * not be interrupted by another task that uses the same mempool
+ * (because it uses a ring which is not preemptable). Also, mempool
+ * functions must not be used outside the DPDK environment: for
+ * example, in linuxapp environment, a thread that is not created by
+ * the EAL must not use mempools. This is due to the per-lcore cache
+ * that won't work as rte_lcore_id() will not return a correct value.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <errno.h>
+#include <inttypes.h>
+#include <sys/queue.h>
+
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_lcore.h>
+#include <rte_memory.h>
+#include <rte_branch_prediction.h>
+#include <rte_ring.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define RTE_MEMPOOL_HEADER_COOKIE1  0xbadbadbadadd2e55ULL /**< Header cookie. */
+#define RTE_MEMPOOL_HEADER_COOKIE2  0xf2eef2eedadd2e55ULL /**< Header cookie. */
+#define RTE_MEMPOOL_TRAILER_COOKIE  0xadd2e55badbadbadULL /**< Trailer cookie.*/
+
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+/**
+ * A structure that stores the mempool statistics (per-lcore).
+ */
+struct rte_mempool_debug_stats {
+	uint64_t put_bulk;         /**< Number of puts. */
+	uint64_t put_objs;         /**< Number of objects successfully put. */
+	uint64_t get_success_bulk; /**< Successful allocation number. */
+	uint64_t get_success_objs; /**< Objects successfully allocated. */
+	uint64_t get_fail_bulk;    /**< Failed allocation number. */
+	uint64_t get_fail_objs;    /**< Objects that failed to be allocated. */
+} __rte_cache_aligned;
+#endif
+
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+/**
+ * A structure that stores a per-core object cache.
+ */
+struct rte_mempool_cache {
+	unsigned len; /**< Cache len */
+	/*
+	 * Cache is allocated to this size to allow it to overflow in certain
+	 * cases to avoid needless emptying of cache.
+	 */
+	void *objs[RTE_MEMPOOL_CACHE_MAX_SIZE * 3]; /**< Cache objects */
+} __rte_cache_aligned;
+#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
+
+struct rte_mempool_objsz {
+	uint32_t elt_size;     /**< Size of an element. */
+	uint32_t header_size;  /**< Size of header (before elt). */
+	uint32_t trailer_size; /**< Size of trailer (after elt). */
+	uint32_t total_size;
+	/**< Total size of an object (header + elt + trailer). */
+};
+
+#define RTE_MEMPOOL_NAMESIZE 32 /**< Maximum length of a memory pool. */
+#define RTE_MEMPOOL_MZ_PREFIX "MP_"
+
+/* "MP_<name>" */
+#define	RTE_MEMPOOL_MZ_FORMAT	RTE_MEMPOOL_MZ_PREFIX "%s"
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+
+/* "<name>_MP_elt" */
+#define	RTE_MEMPOOL_OBJ_NAME	"%s_" RTE_MEMPOOL_MZ_PREFIX "elt"
+
+#else
+
+#define	RTE_MEMPOOL_OBJ_NAME	RTE_MEMPOOL_MZ_FORMAT
+
+#endif /* RTE_LIBRTE_XEN_DOM0 */
+
+#define	MEMPOOL_PG_SHIFT_MAX	(sizeof(uintptr_t) * CHAR_BIT - 1)
+
+/** Mempool over one chunk of physically continuous memory */
+#define	MEMPOOL_PG_NUM_DEFAULT	1
+
+/**
+ * The RTE mempool structure.
+ */
+struct rte_mempool {
+	char name[RTE_MEMPOOL_NAMESIZE]; /**< Name of mempool. */
+	struct rte_ring *ring;           /**< Ring to store objects. */
+	phys_addr_t phys_addr;           /**< Phys. addr. of mempool struct. */
+	int flags;                       /**< Flags of the mempool. */
+	uint32_t size;                   /**< Size of the mempool. */
+	uint32_t cache_size;             /**< Size of per-lcore local cache. */
+	uint32_t cache_flushthresh;
+	/**< Threshold before we flush excess elements. */
+
+	uint32_t elt_size;               /**< Size of an element. */
+	uint32_t header_size;            /**< Size of header (before elt). */
+	uint32_t trailer_size;           /**< Size of trailer (after elt). */
+
+	unsigned private_data_size;      /**< Size of private data. */
+
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	/** Per-lcore local cache. */
+	struct rte_mempool_cache local_cache[RTE_MAX_LCORE];
+#endif
+
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	/** Per-lcore statistics. */
+	struct rte_mempool_debug_stats stats[RTE_MAX_LCORE];
+#endif
+
+	/* Address translation support, starts from next cache line. */
+
+	/** Number of elements in the elt_pa array. */
+	uint32_t    pg_num __rte_cache_aligned;
+	uint32_t    pg_shift;     /**< LOG2 of the physical pages. */
+	uintptr_t   pg_mask;      /**< physical page mask value. */
+	uintptr_t   elt_va_start;
+	/**< Virtual address of the first mempool object. */
+	uintptr_t   elt_va_end;
+	/**< Virtual address of the <size + 1> mempool object. */
+	phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT];
+	/**< Array of physical pages addresses for the mempool objects buffer. */
+
+}  __rte_cache_aligned;
+
+#define MEMPOOL_F_NO_SPREAD      0x0001 /**< Do not spread in memory. */
+#define MEMPOOL_F_NO_CACHE_ALIGN 0x0002 /**< Do not align objs on cache lines.*/
+#define MEMPOOL_F_SP_PUT         0x0004 /**< Default put is "single-producer".*/
+#define MEMPOOL_F_SC_GET         0x0008 /**< Default get is "single-consumer".*/
+
+/**
+ * @internal When debug is enabled, store some statistics.
+ * @param mp
+ *   Pointer to the memory pool.
+ * @param name
+ *   Name of the statistics field to increment in the memory pool.
+ * @param n
+ *   Number to add to the object-oriented statistics.
+ */
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+#define __MEMPOOL_STAT_ADD(mp, name, n) do {			\
+		unsigned __lcore_id = rte_lcore_id();		\
+		mp->stats[__lcore_id].name##_objs += n;		\
+		mp->stats[__lcore_id].name##_bulk += 1;		\
+	} while(0)
+#else
+#define __MEMPOOL_STAT_ADD(mp, name, n) do {} while(0)
+#endif
+
+/**
+ * Calculates size of the mempool header.
+ * @param mp
+ *   Pointer to the memory pool.
+ * @param pgn
+ *   Number of page used to store mempool objects.
+ */
+#define	MEMPOOL_HEADER_SIZE(mp, pgn)	(sizeof(*(mp)) + \
+	RTE_ALIGN_CEIL(((pgn) - RTE_DIM((mp)->elt_pa)) * \
+	sizeof ((mp)->elt_pa[0]), RTE_CACHE_LINE_SIZE))
+
+/**
+ * Returns TRUE if whole mempool is allocated in one contiguous block of memory.
+ */
+#define	MEMPOOL_IS_CONTIG(mp)                      \
+	((mp)->pg_num == MEMPOOL_PG_NUM_DEFAULT && \
+	(mp)->phys_addr == (mp)->elt_pa[0])
+
+/**
+ * @internal Get a pointer to a mempool pointer in the object header.
+ * @param obj
+ *   Pointer to object.
+ * @return
+ *   The pointer to the mempool from which the object was allocated.
+ */
+static inline struct rte_mempool **__mempool_from_obj(void *obj)
+{
+	struct rte_mempool **mpp;
+	unsigned off;
+
+	off = sizeof(struct rte_mempool *);
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	off += sizeof(uint64_t);
+#endif
+	mpp = (struct rte_mempool **)((char *)obj - off);
+	return mpp;
+}
+
+/**
+ * Return a pointer to the mempool owning this object.
+ *
+ * @param obj
+ *   An object that is owned by a pool. If this is not the case,
+ *   the behavior is undefined.
+ * @return
+ *   A pointer to the mempool structure.
+ */
+static inline const struct rte_mempool *rte_mempool_from_obj(void *obj)
+{
+	struct rte_mempool * const *mpp;
+	mpp = __mempool_from_obj(obj);
+	return *mpp;
+}
+
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+/* get header cookie value */
+static inline uint64_t __mempool_read_header_cookie(const void *obj)
+{
+	return *(const uint64_t *)((const char *)obj - sizeof(uint64_t));
+}
+
+/* get trailer cookie value */
+static inline uint64_t __mempool_read_trailer_cookie(void *obj)
+{
+	struct rte_mempool **mpp = __mempool_from_obj(obj);
+	return *(uint64_t *)((char *)obj + (*mpp)->elt_size);
+}
+
+/* write header cookie value */
+static inline void __mempool_write_header_cookie(void *obj, int free)
+{
+	uint64_t *cookie_p;
+	cookie_p = (uint64_t *)((char *)obj - sizeof(uint64_t));
+	if (free == 0)
+		*cookie_p = RTE_MEMPOOL_HEADER_COOKIE1;
+	else
+		*cookie_p = RTE_MEMPOOL_HEADER_COOKIE2;
+
+}
+
+/* write trailer cookie value */
+static inline void __mempool_write_trailer_cookie(void *obj)
+{
+	uint64_t *cookie_p;
+	struct rte_mempool **mpp = __mempool_from_obj(obj);
+	cookie_p = (uint64_t *)((char *)obj + (*mpp)->elt_size);
+	*cookie_p = RTE_MEMPOOL_TRAILER_COOKIE;
+}
+#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
+
+/**
+ * @internal Check and update cookies or panic.
+ *
+ * @param mp
+ *   Pointer to the memory pool.
+ * @param obj_table_const
+ *   Pointer to a table of void * pointers (objects).
+ * @param n
+ *   Index of object in object table.
+ * @param free
+ *   - 0: object is supposed to be allocated, mark it as free
+ *   - 1: object is supposed to be free, mark it as allocated
+ *   - 2: just check that cookie is valid (free or allocated)
+ */
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic ignored "-Wcast-qual"
+#endif
+static inline void __mempool_check_cookies(const struct rte_mempool *mp,
+					   void * const *obj_table_const,
+					   unsigned n, int free)
+{
+	uint64_t cookie;
+	void *tmp;
+	void *obj;
+	void **obj_table;
+
+	/* Force to drop the "const" attribute. This is done only when
+	 * DEBUG is enabled */
+	tmp = (void *) obj_table_const;
+	obj_table = (void **) tmp;
+
+	while (n--) {
+		obj = obj_table[n];
+
+		if (rte_mempool_from_obj(obj) != mp)
+			rte_panic("MEMPOOL: object is owned by another "
+				  "mempool\n");
+
+		cookie = __mempool_read_header_cookie(obj);
+
+		if (free == 0) {
+			if (cookie != RTE_MEMPOOL_HEADER_COOKIE1) {
+				rte_log_set_history(0);
+				RTE_LOG(CRIT, MEMPOOL,
+					"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
+					obj, mp, cookie);
+				rte_panic("MEMPOOL: bad header cookie (put)\n");
+			}
+			__mempool_write_header_cookie(obj, 1);
+		}
+		else if (free == 1) {
+			if (cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
+				rte_log_set_history(0);
+				RTE_LOG(CRIT, MEMPOOL,
+					"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
+					obj, mp, cookie);
+				rte_panic("MEMPOOL: bad header cookie (get)\n");
+			}
+			__mempool_write_header_cookie(obj, 0);
+		}
+		else if (free == 2) {
+			if (cookie != RTE_MEMPOOL_HEADER_COOKIE1 &&
+			    cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
+				rte_log_set_history(0);
+				RTE_LOG(CRIT, MEMPOOL,
+					"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
+					obj, mp, cookie);
+				rte_panic("MEMPOOL: bad header cookie (audit)\n");
+			}
+		}
+		cookie = __mempool_read_trailer_cookie(obj);
+		if (cookie != RTE_MEMPOOL_TRAILER_COOKIE) {
+			rte_log_set_history(0);
+			RTE_LOG(CRIT, MEMPOOL,
+				"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
+				obj, mp, cookie);
+			rte_panic("MEMPOOL: bad trailer cookie\n");
+		}
+	}
+}
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic error "-Wcast-qual"
+#endif
+#else
+#define __mempool_check_cookies(mp, obj_table_const, n, free) do {} while(0)
+#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
+
+/**
+ * An mempool's object iterator callback function.
+ */
+typedef void (*rte_mempool_obj_iter_t)(void * /*obj_iter_arg*/,
+	void * /*obj_start*/,
+	void * /*obj_end*/,
+	uint32_t /*obj_index */);
+
+/*
+ * Iterates across objects of the given size and alignment in the
+ * provided chunk of memory. The given memory buffer can consist of
+ * disjoint physical pages.
+ * For each object calls the provided callback (if any).
+ * Used to populate mempool, walk through all elements of the mempool,
+ * estimate how many elements of the given size could be created in the given
+ * memory buffer.
+ * @param vaddr
+ *   Virtual address of the memory buffer.
+ * @param elt_num
+ *   Maximum number of objects to iterate through.
+ * @param elt_sz
+ *   Size of each object.
+ * @param paddr
+ *   Array of phyiscall addresses of the pages that comprises given memory
+ *   buffer.
+ * @param pg_num
+ *   Number of elements in the paddr array.
+ * @param pg_shift
+ *   LOG2 of the physical pages size.
+ * @param obj_iter
+ *   Object iterator callback function (could be NULL).
+ * @param obj_iter_arg
+ *   User defined Prameter for the object iterator callback function.
+ *
+ * @return
+ *   Number of objects iterated through.
+ */
+
+uint32_t rte_mempool_obj_iter(void *vaddr,
+	uint32_t elt_num, size_t elt_sz, size_t align,
+	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
+	rte_mempool_obj_iter_t obj_iter, void *obj_iter_arg);
+
+/**
+ * An object constructor callback function for mempool.
+ *
+ * Arguments are the mempool, the opaque pointer given by the user in
+ * rte_mempool_create(), the pointer to the element and the index of
+ * the element in the pool.
+ */
+typedef void (rte_mempool_obj_ctor_t)(struct rte_mempool *, void *,
+				      void *, unsigned);
+
+/**
+ * A mempool constructor callback function.
+ *
+ * Arguments are the mempool and the opaque pointer given by the user in
+ * rte_mempool_create().
+ */
+typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *);
+
+/**
+ * Creates a new mempool named *name* in memory.
+ *
+ * This function uses ``memzone_reserve()`` to allocate memory. The
+ * pool contains n elements of elt_size. Its size is set to n.
+ * All elements of the mempool are allocated together with the mempool header,
+ * in one physically continuous chunk of memory.
+ *
+ * @param name
+ *   The name of the mempool.
+ * @param n
+ *   The number of elements in the mempool. The optimum size (in terms of
+ *   memory usage) for a mempool is when n is a power of two minus one:
+ *   n = (2^q - 1).
+ * @param elt_size
+ *   The size of each element.
+ * @param cache_size
+ *   If cache_size is non-zero, the rte_mempool library will try to
+ *   limit the accesses to the common lockless pool, by maintaining a
+ *   per-lcore object cache. This argument must be lower or equal to
+ *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
+ *   cache_size to have "n modulo cache_size == 0": if this is
+ *   not the case, some elements will always stay in the pool and will
+ *   never be used. The access to the per-lcore table is of course
+ *   faster than the multi-producer/consumer pool. The cache can be
+ *   disabled if the cache_size argument is set to 0; it can be useful to
+ *   avoid losing objects in cache. Note that even if not used, the
+ *   memory space for cache is always reserved in a mempool structure,
+ *   except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
+ * @param private_data_size
+ *   The size of the private data appended after the mempool
+ *   structure. This is useful for storing some private data after the
+ *   mempool structure, as is done for rte_mbuf_pool for example.
+ * @param mp_init
+ *   A function pointer that is called for initialization of the pool,
+ *   before object initialization. The user can initialize the private
+ *   data in this function if needed. This parameter can be NULL if
+ *   not needed.
+ * @param mp_init_arg
+ *   An opaque pointer to data that can be used in the mempool
+ *   constructor function.
+ * @param obj_init
+ *   A function pointer that is called for each object at
+ *   initialization of the pool. The user can set some meta data in
+ *   objects if needed. This parameter can be NULL if not needed.
+ *   The obj_init() function takes the mempool pointer, the init_arg,
+ *   the object pointer and the object number as parameters.
+ * @param obj_init_arg
+ *   An opaque pointer to data that can be used as an argument for
+ *   each call to the object constructor function.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in the case of
+ *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ *   constraint for the reserved zone.
+ * @param flags
+ *   The *flags* arguments is an OR of following flags:
+ *   - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
+ *     between channels in RAM: the pool allocator will add padding
+ *     between objects depending on the hardware configuration. See
+ *     Memory alignment constraints for details. If this flag is set,
+ *     the allocator will just align them to a cache line.
+ *   - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
+ *     cache-aligned. This flag removes this constraint, and no
+ *     padding will be present between objects. This flag implies
+ *     MEMPOOL_F_NO_SPREAD.
+ *   - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
+ *     when using rte_mempool_put() or rte_mempool_put_bulk() is
+ *     "single-producer". Otherwise, it is "multi-producers".
+ *   - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
+ *     when using rte_mempool_get() or rte_mempool_get_bulk() is
+ *     "single-consumer". Otherwise, it is "multi-consumers".
+ * @return
+ *   The pointer to the new allocated mempool, on success. NULL on error
+ *   with rte_errno set appropriately. Possible rte_errno values include:
+ *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ *    - E_RTE_SECONDARY - function was called from a secondary process instance
+ *    - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
+ *    - EINVAL - cache size provided is too large
+ *    - ENOSPC - the maximum number of memzones has already been allocated
+ *    - EEXIST - a memzone with the same name already exists
+ *    - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_mempool_create(const char *name, unsigned n, unsigned elt_size,
+		   unsigned cache_size, unsigned private_data_size,
+		   rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+		   rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+		   int socket_id, unsigned flags);
+
+/**
+ * Creates a new mempool named *name* in memory.
+ *
+ * This function uses ``memzone_reserve()`` to allocate memory. The
+ * pool contains n elements of elt_size. Its size is set to n.
+ * Depending on the input parameters, mempool elements can be either allocated
+ * together with the mempool header, or an externally provided memory buffer
+ * could be used to store mempool objects. In later case, that external
+ * memory buffer can consist of set of disjoint phyiscal pages.
+ *
+ * @param name
+ *   The name of the mempool.
+ * @param n
+ *   The number of elements in the mempool. The optimum size (in terms of
+ *   memory usage) for a mempool is when n is a power of two minus one:
+ *   n = (2^q - 1).
+ * @param elt_size
+ *   The size of each element.
+ * @param cache_size
+ *   If cache_size is non-zero, the rte_mempool library will try to
+ *   limit the accesses to the common lockless pool, by maintaining a
+ *   per-lcore object cache. This argument must be lower or equal to
+ *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
+ *   cache_size to have "n modulo cache_size == 0": if this is
+ *   not the case, some elements will always stay in the pool and will
+ *   never be used. The access to the per-lcore table is of course
+ *   faster than the multi-producer/consumer pool. The cache can be
+ *   disabled if the cache_size argument is set to 0; it can be useful to
+ *   avoid losing objects in cache. Note that even if not used, the
+ *   memory space for cache is always reserved in a mempool structure,
+ *   except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
+ * @param private_data_size
+ *   The size of the private data appended after the mempool
+ *   structure. This is useful for storing some private data after the
+ *   mempool structure, as is done for rte_mbuf_pool for example.
+ * @param mp_init
+ *   A function pointer that is called for initialization of the pool,
+ *   before object initialization. The user can initialize the private
+ *   data in this function if needed. This parameter can be NULL if
+ *   not needed.
+ * @param mp_init_arg
+ *   An opaque pointer to data that can be used in the mempool
+ *   constructor function.
+ * @param obj_init
+ *   A function pointer that is called for each object at
+ *   initialization of the pool. The user can set some meta data in
+ *   objects if needed. This parameter can be NULL if not needed.
+ *   The obj_init() function takes the mempool pointer, the init_arg,
+ *   the object pointer and the object number as parameters.
+ * @param obj_init_arg
+ *   An opaque pointer to data that can be used as an argument for
+ *   each call to the object constructor function.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in the case of
+ *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ *   constraint for the reserved zone.
+ * @param flags
+ *   The *flags* arguments is an OR of following flags:
+ *   - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
+ *     between channels in RAM: the pool allocator will add padding
+ *     between objects depending on the hardware configuration. See
+ *     Memory alignment constraints for details. If this flag is set,
+ *     the allocator will just align them to a cache line.
+ *   - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
+ *     cache-aligned. This flag removes this constraint, and no
+ *     padding will be present between objects. This flag implies
+ *     MEMPOOL_F_NO_SPREAD.
+ *   - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
+ *     when using rte_mempool_put() or rte_mempool_put_bulk() is
+ *     "single-producer". Otherwise, it is "multi-producers".
+ *   - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
+ *     when using rte_mempool_get() or rte_mempool_get_bulk() is
+ *     "single-consumer". Otherwise, it is "multi-consumers".
+ * @param vaddr
+ *   Virtual address of the externally allocated memory buffer.
+ *   Will be used to store mempool objects.
+ * @param paddr
+ *   Array of phyiscall addresses of the pages that comprises given memory
+ *   buffer.
+ * @param pg_num
+ *   Number of elements in the paddr array.
+ * @param pg_shift
+ *   LOG2 of the physical pages size.
+ * @return
+ *   The pointer to the new allocated mempool, on success. NULL on error
+ *   with rte_errno set appropriately. Possible rte_errno values include:
+ *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ *    - E_RTE_SECONDARY - function was called from a secondary process instance
+ *    - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
+ *    - EINVAL - cache size provided is too large
+ *    - ENOSPC - the maximum number of memzones has already been allocated
+ *    - EEXIST - a memzone with the same name already exists
+ *    - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
+		unsigned cache_size, unsigned private_data_size,
+		rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+		rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+		int socket_id, unsigned flags, void *vaddr,
+		const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+/**
+ * Creates a new mempool named *name* in memory on Xen Dom0.
+ *
+ * This function uses ``rte_mempool_xmem_create()`` to allocate memory. The
+ * pool contains n elements of elt_size. Its size is set to n.
+ * All elements of the mempool are allocated together with the mempool header,
+ * and memory buffer can consist of set of disjoint phyiscal pages.
+ *
+ * @param name
+ *   The name of the mempool.
+ * @param n
+ *   The number of elements in the mempool. The optimum size (in terms of
+ *   memory usage) for a mempool is when n is a power of two minus one:
+ *   n = (2^q - 1).
+ * @param elt_size
+ *   The size of each element.
+ * @param cache_size
+ *   If cache_size is non-zero, the rte_mempool library will try to
+ *   limit the accesses to the common lockless pool, by maintaining a
+ *   per-lcore object cache. This argument must be lower or equal to
+ *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
+ *   cache_size to have "n modulo cache_size == 0": if this is
+ *   not the case, some elements will always stay in the pool and will
+ *   never be used. The access to the per-lcore table is of course
+ *   faster than the multi-producer/consumer pool. The cache can be
+ *   disabled if the cache_size argument is set to 0; it can be useful to
+ *   avoid losing objects in cache. Note that even if not used, the
+ *   memory space for cache is always reserved in a mempool structure,
+ *   except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
+ * @param private_data_size
+ *   The size of the private data appended after the mempool
+ *   structure. This is useful for storing some private data after the
+ *   mempool structure, as is done for rte_mbuf_pool for example.
+ * @param mp_init
+ *   A function pointer that is called for initialization of the pool,
+ *   before object initialization. The user can initialize the private
+ *   data in this function if needed. This parameter can be NULL if
+ *   not needed.
+ * @param mp_init_arg
+ *   An opaque pointer to data that can be used in the mempool
+ *   constructor function.
+ * @param obj_init
+ *   A function pointer that is called for each object at
+ *   initialization of the pool. The user can set some meta data in
+ *   objects if needed. This parameter can be NULL if not needed.
+ *   The obj_init() function takes the mempool pointer, the init_arg,
+ *   the object pointer and the object number as parameters.
+ * @param obj_init_arg
+ *   An opaque pointer to data that can be used as an argument for
+ *   each call to the object constructor function.
+ * @param socket_id
+ *   The *socket_id* argument is the socket identifier in the case of
+ *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
+ *   constraint for the reserved zone.
+ * @param flags
+ *   The *flags* arguments is an OR of following flags:
+ *   - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
+ *     between channels in RAM: the pool allocator will add padding
+ *     between objects depending on the hardware configuration. See
+ *     Memory alignment constraints for details. If this flag is set,
+ *     the allocator will just align them to a cache line.
+ *   - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
+ *     cache-aligned. This flag removes this constraint, and no
+ *     padding will be present between objects. This flag implies
+ *     MEMPOOL_F_NO_SPREAD.
+ *   - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
+ *     when using rte_mempool_put() or rte_mempool_put_bulk() is
+ *     "single-producer". Otherwise, it is "multi-producers".
+ *   - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
+ *     when using rte_mempool_get() or rte_mempool_get_bulk() is
+ *     "single-consumer". Otherwise, it is "multi-consumers".
+ * @return
+ *   The pointer to the new allocated mempool, on success. NULL on error
+ *   with rte_errno set appropriately. Possible rte_errno values include:
+ *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
+ *    - E_RTE_SECONDARY - function was called from a secondary process instance
+ *    - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
+ *    - EINVAL - cache size provided is too large
+ *    - ENOSPC - the maximum number of memzones has already been allocated
+ *    - EEXIST - a memzone with the same name already exists
+ *    - ENOMEM - no appropriate memory area found in which to create memzone
+ */
+struct rte_mempool *
+rte_dom0_mempool_create(const char *name, unsigned n, unsigned elt_size,
+		unsigned cache_size, unsigned private_data_size,
+		rte_mempool_ctor_t *mp_init, void *mp_init_arg,
+		rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
+		int socket_id, unsigned flags);
+#endif
+
+/**
+ * Dump the status of the mempool to the console.
+ *
+ * @param f
+ *   A pointer to a file for output
+ * @param mp
+ *   A pointer to the mempool structure.
+ */
+void rte_mempool_dump(FILE *f, const struct rte_mempool *mp);
+
+/**
+ * @internal Put several objects back in the mempool; used internally.
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects).
+ * @param n
+ *   The number of objects to store back in the mempool, must be strictly
+ *   positive.
+ * @param is_mp
+ *   Mono-producer (0) or multi-producers (1).
+ */
+static inline void __attribute__((always_inline))
+__mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
+		    unsigned n, int is_mp)
+{
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	struct rte_mempool_cache *cache;
+	uint32_t index;
+	void **cache_objs;
+	unsigned lcore_id = rte_lcore_id();
+	uint32_t cache_size = mp->cache_size;
+	uint32_t flushthresh = mp->cache_flushthresh;
+#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
+
+	/* increment stat now, adding in mempool always success */
+	__MEMPOOL_STAT_ADD(mp, put, n);
+
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	/* cache is not enabled or single producer */
+	if (unlikely(cache_size == 0 || is_mp == 0))
+		goto ring_enqueue;
+
+	/* Go straight to ring if put would overflow mem allocated for cache */
+	if (unlikely(n > RTE_MEMPOOL_CACHE_MAX_SIZE))
+		goto ring_enqueue;
+
+	cache = &mp->local_cache[lcore_id];
+	cache_objs = &cache->objs[cache->len];
+
+	/*
+	 * The cache follows the following algorithm
+	 *   1. Add the objects to the cache
+	 *   2. Anything greater than the cache min value (if it crosses the
+	 *   cache flush threshold) is flushed to the ring.
+	 */
+
+	/* Add elements back into the cache */
+	for (index = 0; index < n; ++index, obj_table++)
+		cache_objs[index] = *obj_table;
+
+	cache->len += n;
+
+	if (cache->len >= flushthresh) {
+		rte_ring_mp_enqueue_bulk(mp->ring, &cache->objs[cache_size],
+				cache->len - cache_size);
+		cache->len = cache_size;
+	}
+
+	return;
+
+ring_enqueue:
+#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
+
+	/* push remaining objects in ring */
+#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
+	if (is_mp) {
+		if (rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n) < 0)
+			rte_panic("cannot put objects in mempool\n");
+	}
+	else {
+		if (rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n) < 0)
+			rte_panic("cannot put objects in mempool\n");
+	}
+#else
+	if (is_mp)
+		rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n);
+	else
+		rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n);
+#endif
+}
+
+
+/**
+ * Put several objects back in the mempool (multi-producers safe).
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects).
+ * @param n
+ *   The number of objects to add in the mempool from the obj_table.
+ */
+static inline void __attribute__((always_inline))
+rte_mempool_mp_put_bulk(struct rte_mempool *mp, void * const *obj_table,
+			unsigned n)
+{
+	__mempool_check_cookies(mp, obj_table, n, 0);
+	__mempool_put_bulk(mp, obj_table, n, 1);
+}
+
+/**
+ * Put several objects back in the mempool (NOT multi-producers safe).
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects).
+ * @param n
+ *   The number of objects to add in the mempool from obj_table.
+ */
+static inline void
+rte_mempool_sp_put_bulk(struct rte_mempool *mp, void * const *obj_table,
+			unsigned n)
+{
+	__mempool_check_cookies(mp, obj_table, n, 0);
+	__mempool_put_bulk(mp, obj_table, n, 0);
+}
+
+/**
+ * Put several objects back in the mempool.
+ *
+ * This function calls the multi-producer or the single-producer
+ * version depending on the default behavior that was specified at
+ * mempool creation time (see flags).
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects).
+ * @param n
+ *   The number of objects to add in the mempool from obj_table.
+ */
+static inline void __attribute__((always_inline))
+rte_mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
+		     unsigned n)
+{
+	__mempool_check_cookies(mp, obj_table, n, 0);
+	__mempool_put_bulk(mp, obj_table, n, !(mp->flags & MEMPOOL_F_SP_PUT));
+}
+
+/**
+ * Put one object in the mempool (multi-producers safe).
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj
+ *   A pointer to the object to be added.
+ */
+static inline void __attribute__((always_inline))
+rte_mempool_mp_put(struct rte_mempool *mp, void *obj)
+{
+	rte_mempool_mp_put_bulk(mp, &obj, 1);
+}
+
+/**
+ * Put one object back in the mempool (NOT multi-producers safe).
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj
+ *   A pointer to the object to be added.
+ */
+static inline void __attribute__((always_inline))
+rte_mempool_sp_put(struct rte_mempool *mp, void *obj)
+{
+	rte_mempool_sp_put_bulk(mp, &obj, 1);
+}
+
+/**
+ * Put one object back in the mempool.
+ *
+ * This function calls the multi-producer or the single-producer
+ * version depending on the default behavior that was specified at
+ * mempool creation time (see flags).
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj
+ *   A pointer to the object to be added.
+ */
+static inline void __attribute__((always_inline))
+rte_mempool_put(struct rte_mempool *mp, void *obj)
+{
+	rte_mempool_put_bulk(mp, &obj, 1);
+}
+
+/**
+ * @internal Get several objects from the mempool; used internally.
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects).
+ * @param n
+ *   The number of objects to get, must be strictly positive.
+ * @param is_mc
+ *   Mono-consumer (0) or multi-consumers (1).
+ * @return
+ *   - >=0: Success; number of objects supplied.
+ *   - <0: Error; code of ring dequeue function.
+ */
+static inline int __attribute__((always_inline))
+__mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
+		   unsigned n, int is_mc)
+{
+	int ret;
+#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
+	struct rte_mempool_cache *cache;
+	uint32_t index, len;
+	void **cache_objs;
+	unsigned lcore_id = rte_lcore_id();
+	uint32_t cache_size = mp->cache_size;
+
+	/* cache is not enabled or single consumer */
+	if (unlikely(cache_size == 0 || is_mc == 0 || n >= cache_size))
+		goto ring_dequeue;
+
+	cache = &mp->local_cache[lcore_id];
+	cache_objs = cache->objs;
+
+	/* Can this be satisfied from the cache? */
+	if (cache->len < n) {
+		/* No. Backfill the cache first, and then fill from it */
+		uint32_t req = n + (cache_size - cache->len);
+
+		/* How many do we require i.e. number to fill the cache + the request */
+		ret = rte_ring_mc_dequeue_bulk(mp->ring, &cache->objs[cache->len], req);
+		if (unlikely(ret < 0)) {
+			/*
+			 * In the offchance that we are buffer constrained,
+			 * where we are not able to allocate cache + n, go to
+			 * the ring directly. If that fails, we are truly out of
+			 * buffers.
+			 */
+			goto ring_dequeue;
+		}
+
+		cache->len += req;
+	}
+
+	/* Now fill in the response ... */
+	for (index = 0, len = cache->len - 1; index < n; ++index, len--, obj_table++)
+		*obj_table = cache_objs[len];
+
+	cache->len -= n;
+
+	__MEMPOOL_STAT_ADD(mp, get_success, n);
+
+	return 0;
+
+ring_dequeue:
+#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
+
+	/* get remaining objects from ring */
+	if (is_mc)
+		ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n);
+	else
+		ret = rte_ring_sc_dequeue_bulk(mp->ring, obj_table, n);
+
+	if (ret < 0)
+		__MEMPOOL_STAT_ADD(mp, get_fail, n);
+	else
+		__MEMPOOL_STAT_ADD(mp, get_success, n);
+
+	return ret;
+}
+
+/**
+ * Get several objects from the mempool (multi-consumers safe).
+ *
+ * If cache is enabled, objects will be retrieved first from cache,
+ * subsequently from the common pool. Note that it can return -ENOENT when
+ * the local cache and common pool are empty, even if cache from other
+ * lcores are full.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects) that will be filled.
+ * @param n
+ *   The number of objects to get from mempool to obj_table.
+ * @return
+ *   - 0: Success; objects taken.
+ *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
+ */
+static inline int __attribute__((always_inline))
+rte_mempool_mc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
+{
+	int ret;
+	ret = __mempool_get_bulk(mp, obj_table, n, 1);
+	if (ret == 0)
+		__mempool_check_cookies(mp, obj_table, n, 1);
+	return ret;
+}
+
+/**
+ * Get several objects from the mempool (NOT multi-consumers safe).
+ *
+ * If cache is enabled, objects will be retrieved first from cache,
+ * subsequently from the common pool. Note that it can return -ENOENT when
+ * the local cache and common pool are empty, even if cache from other
+ * lcores are full.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects) that will be filled.
+ * @param n
+ *   The number of objects to get from the mempool to obj_table.
+ * @return
+ *   - 0: Success; objects taken.
+ *   - -ENOENT: Not enough entries in the mempool; no object is
+ *     retrieved.
+ */
+static inline int __attribute__((always_inline))
+rte_mempool_sc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
+{
+	int ret;
+	ret = __mempool_get_bulk(mp, obj_table, n, 0);
+	if (ret == 0)
+		__mempool_check_cookies(mp, obj_table, n, 1);
+	return ret;
+}
+
+/**
+ * Get several objects from the mempool.
+ *
+ * This function calls the multi-consumers or the single-consumer
+ * version, depending on the default behaviour that was specified at
+ * mempool creation time (see flags).
+ *
+ * If cache is enabled, objects will be retrieved first from cache,
+ * subsequently from the common pool. Note that it can return -ENOENT when
+ * the local cache and common pool are empty, even if cache from other
+ * lcores are full.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_table
+ *   A pointer to a table of void * pointers (objects) that will be filled.
+ * @param n
+ *   The number of objects to get from the mempool to obj_table.
+ * @return
+ *   - 0: Success; objects taken
+ *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
+ */
+static inline int __attribute__((always_inline))
+rte_mempool_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
+{
+	int ret;
+	ret = __mempool_get_bulk(mp, obj_table, n,
+				 !(mp->flags & MEMPOOL_F_SC_GET));
+	if (ret == 0)
+		__mempool_check_cookies(mp, obj_table, n, 1);
+	return ret;
+}
+
+/**
+ * Get one object from the mempool (multi-consumers safe).
+ *
+ * If cache is enabled, objects will be retrieved first from cache,
+ * subsequently from the common pool. Note that it can return -ENOENT when
+ * the local cache and common pool are empty, even if cache from other
+ * lcores are full.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_p
+ *   A pointer to a void * pointer (object) that will be filled.
+ * @return
+ *   - 0: Success; objects taken.
+ *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
+ */
+static inline int __attribute__((always_inline))
+rte_mempool_mc_get(struct rte_mempool *mp, void **obj_p)
+{
+	return rte_mempool_mc_get_bulk(mp, obj_p, 1);
+}
+
+/**
+ * Get one object from the mempool (NOT multi-consumers safe).
+ *
+ * If cache is enabled, objects will be retrieved first from cache,
+ * subsequently from the common pool. Note that it can return -ENOENT when
+ * the local cache and common pool are empty, even if cache from other
+ * lcores are full.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_p
+ *   A pointer to a void * pointer (object) that will be filled.
+ * @return
+ *   - 0: Success; objects taken.
+ *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
+ */
+static inline int __attribute__((always_inline))
+rte_mempool_sc_get(struct rte_mempool *mp, void **obj_p)
+{
+	return rte_mempool_sc_get_bulk(mp, obj_p, 1);
+}
+
+/**
+ * Get one object from the mempool.
+ *
+ * This function calls the multi-consumers or the single-consumer
+ * version, depending on the default behavior that was specified at
+ * mempool creation (see flags).
+ *
+ * If cache is enabled, objects will be retrieved first from cache,
+ * subsequently from the common pool. Note that it can return -ENOENT when
+ * the local cache and common pool are empty, even if cache from other
+ * lcores are full.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param obj_p
+ *   A pointer to a void * pointer (object) that will be filled.
+ * @return
+ *   - 0: Success; objects taken.
+ *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
+ */
+static inline int __attribute__((always_inline))
+rte_mempool_get(struct rte_mempool *mp, void **obj_p)
+{
+	return rte_mempool_get_bulk(mp, obj_p, 1);
+}
+
+/**
+ * Return the number of entries in the mempool.
+ *
+ * When cache is enabled, this function has to browse the length of
+ * all lcores, so it should not be used in a data path, but only for
+ * debug purposes.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @return
+ *   The number of entries in the mempool.
+ */
+unsigned rte_mempool_count(const struct rte_mempool *mp);
+
+/**
+ * Return the number of free entries in the mempool ring.
+ * i.e. how many entries can be freed back to the mempool.
+ *
+ * NOTE: This corresponds to the number of elements *allocated* from the
+ * memory pool, not the number of elements in the pool itself. To count
+ * the number elements currently available in the pool, use "rte_mempool_count"
+ *
+ * When cache is enabled, this function has to browse the length of
+ * all lcores, so it should not be used in a data path, but only for
+ * debug purposes.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @return
+ *   The number of free entries in the mempool.
+ */
+static inline unsigned
+rte_mempool_free_count(const struct rte_mempool *mp)
+{
+	return mp->size - rte_mempool_count(mp);
+}
+
+/**
+ * Test if the mempool is full.
+ *
+ * When cache is enabled, this function has to browse the length of all
+ * lcores, so it should not be used in a data path, but only for debug
+ * purposes.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @return
+ *   - 1: The mempool is full.
+ *   - 0: The mempool is not full.
+ */
+static inline int
+rte_mempool_full(const struct rte_mempool *mp)
+{
+	return !!(rte_mempool_count(mp) == mp->size);
+}
+
+/**
+ * Test if the mempool is empty.
+ *
+ * When cache is enabled, this function has to browse the length of all
+ * lcores, so it should not be used in a data path, but only for debug
+ * purposes.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @return
+ *   - 1: The mempool is empty.
+ *   - 0: The mempool is not empty.
+ */
+static inline int
+rte_mempool_empty(const struct rte_mempool *mp)
+{
+	return !!(rte_mempool_count(mp) == 0);
+}
+
+/**
+ * Return the physical address of elt, which is an element of the pool mp.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @param elt
+ *   A pointer (virtual address) to the element of the pool.
+ * @return
+ *   The physical address of the elt element.
+ */
+static inline phys_addr_t
+rte_mempool_virt2phy(const struct rte_mempool *mp, const void *elt)
+{
+	if (rte_eal_has_hugepages()) {
+		uintptr_t off;
+
+		off = (const char *)elt - (const char *)mp->elt_va_start;
+		return (mp->elt_pa[off >> mp->pg_shift] + (off & mp->pg_mask));
+	} else {
+		/*
+		 * If huge pages are disabled, we cannot assume the
+		 * memory region to be physically contiguous.
+		 * Lookup for each element.
+		 */
+		return rte_mem_virt2phy(elt);
+	}
+}
+
+/**
+ * Check the consistency of mempool objects.
+ *
+ * Verify the coherency of fields in the mempool structure. Also check
+ * that the cookies of mempool objects (even the ones that are not
+ * present in pool) have a correct value. If not, a panic will occur.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ */
+void rte_mempool_audit(const struct rte_mempool *mp);
+
+/**
+ * Return a pointer to the private data in an mempool structure.
+ *
+ * @param mp
+ *   A pointer to the mempool structure.
+ * @return
+ *   A pointer to the private data.
+ */
+static inline void *rte_mempool_get_priv(struct rte_mempool *mp)
+{
+	return (char *)mp + MEMPOOL_HEADER_SIZE(mp, mp->pg_num);
+}
+
+/**
+ * Dump the status of all mempools on the console
+ *
+ * @param f
+ *   A pointer to a file for output
+ */
+void rte_mempool_list_dump(FILE *f);
+
+/**
+ * Search a mempool from its name
+ *
+ * @param name
+ *   The name of the mempool.
+ * @return
+ *   The pointer to the mempool matching the name, or NULL if not found.
+ *   NULL on error
+ *   with rte_errno set appropriately. Possible rte_errno values include:
+ *    - ENOENT - required entry not available to return.
+ *
+ */
+struct rte_mempool *rte_mempool_lookup(const char *name);
+
+/**
+ * Given a desired size of the mempool element and mempool flags,
+ * caluclates header, trailer, body and total sizes of the mempool object.
+ * @param elt_size
+ *   The size of each element.
+ * @param flags
+ *   The flags used for the mempool creation.
+ *   Consult rte_mempool_create() for more information about possible values.
+ *   The size of each element.
+ * @return
+ *   Total size of the mempool object.
+ */
+uint32_t rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags,
+	struct rte_mempool_objsz *sz);
+
+/**
+ * Calculate maximum amount of memory required to store given number of objects.
+ * Assumes that the memory buffer will be aligned at page boundary.
+ * Note, that if object size is bigger then page size, then it assumes that
+ * we have a subsets of physically continuous  pages big enough to store
+ * at least one object.
+ * @param elt_num
+ *   Number of elements.
+ * @param elt_sz
+ *   The size of each element.
+ * @param pg_shift
+ *   LOG2 of the physical pages size.
+ * @return
+ *   Required memory size aligned at page boundary.
+ */
+size_t rte_mempool_xmem_size(uint32_t elt_num, size_t elt_sz,
+	uint32_t pg_shift);
+
+/**
+ * Calculate how much memory would be actually required with the given
+ * memory footprint to store required number of objects.
+ * @param vaddr
+ *   Virtual address of the externally allocated memory buffer.
+ *   Will be used to store mempool objects.
+ * @param elt_num
+ *   Number of elements.
+ * @param elt_sz
+ *   The size of each element.
+ * @param paddr
+ *   Array of phyiscall addresses of the pages that comprises given memory
+ *   buffer.
+ * @param pg_num
+ *   Number of elements in the paddr array.
+ * @param pg_shift
+ *   LOG2 of the physical pages size.
+ * @return
+ *   Number of bytes needed to store given number of objects,
+ *   aligned to the given page size.
+ *   If provided memory buffer is not big enough:
+ *   (-1) * actual number of elemnts that can be stored in that buffer.
+ */
+ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, size_t elt_sz,
+	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
+
+/**
+ * Walk list of all memory pools
+ *
+ * @param func
+ *   Iterator function
+ * @param arg
+ *   Argument passed to iterator
+ */
+void rte_mempool_walk(void (*func)(const struct rte_mempool *, void *arg),
+		      void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_MEMPOOL_H_ */
diff --git a/lib/librte_mempool/Makefile b/lib/librte_mempool/Makefile
deleted file mode 100644
index 9939e10..0000000
--- a/lib/librte_mempool/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#   BSD LICENSE
-#
-#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
-#   All rights reserved.
-#
-#   Redistribution and use in source and binary forms, with or without
-#   modification, are permitted provided that the following conditions
-#   are met:
-#
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in
-#       the documentation and/or other materials provided with the
-#       distribution.
-#     * Neither the name of Intel Corporation nor the names of its
-#       contributors may be used to endorse or promote products derived
-#       from this software without specific prior written permission.
-#
-#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-include $(RTE_SDK)/mk/rte.vars.mk
-
-# library name
-LIB = librte_mempool.a
-
-CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3
-
-# all source are stored in SRCS-y
-SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) +=  rte_mempool.c
-ifeq ($(CONFIG_RTE_LIBRTE_XEN_DOM0),y)
-SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) +=  rte_dom0_mempool.c
-endif
-# install includes
-SYMLINK-$(CONFIG_RTE_LIBRTE_MEMPOOL)-include := rte_mempool.h
-
-# this lib needs eal, rte_ring and rte_malloc
-DEPDIRS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += lib/librte_eal lib/librte_ring
-DEPDIRS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += lib/librte_malloc
-
-include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_mempool/rte_dom0_mempool.c b/lib/librte_mempool/rte_dom0_mempool.c
deleted file mode 100644
index 9ec68fb..0000000
--- a/lib/librte_mempool/rte_dom0_mempool.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdint.h>
-#include <unistd.h>
-#include <stdarg.h>
-#include <inttypes.h>
-#include <errno.h>
-#include <sys/queue.h>
-
-#include <rte_common.h>
-#include <rte_log.h>
-#include <rte_debug.h>
-#include <rte_memory.h>
-#include <rte_memzone.h>
-#include <rte_atomic.h>
-#include <rte_launch.h>
-#include <rte_tailq.h>
-#include <rte_eal.h>
-#include <rte_eal_memconfig.h>
-#include <rte_per_lcore.h>
-#include <rte_lcore.h>
-#include <rte_branch_prediction.h>
-#include <rte_ring.h>
-#include <rte_errno.h>
-#include <rte_string_fns.h>
-#include <rte_spinlock.h>
-
-#include "rte_mempool.h"
-
-static void
-get_phys_map(void *va, phys_addr_t pa[], uint32_t pg_num,
-            uint32_t pg_sz, uint32_t memseg_id)
-{
-    uint32_t i;
-    uint64_t virt_addr, mfn_id;
-    struct rte_mem_config *mcfg;
-    uint32_t page_size = getpagesize();
-
-    /* get pointer to global configuration */
-    mcfg = rte_eal_get_configuration()->mem_config;
-    virt_addr =(uintptr_t) mcfg->memseg[memseg_id].addr;
-
-    for (i = 0; i != pg_num; i++) {
-        mfn_id = ((uintptr_t)va + i * pg_sz - virt_addr) / RTE_PGSIZE_2M;
-        pa[i] = mcfg->memseg[memseg_id].mfn[mfn_id] * page_size;
-    }
-}
-
-/* create the mempool for supporting Dom0 */
-struct rte_mempool *
-rte_dom0_mempool_create(const char *name, unsigned elt_num, unsigned elt_size,
-           unsigned cache_size, unsigned private_data_size,
-           rte_mempool_ctor_t *mp_init, void *mp_init_arg,
-           rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
-           int socket_id, unsigned flags)
-{
-	struct rte_mempool *mp = NULL;
-	phys_addr_t *pa;
-	char *va;
-	size_t sz;
-	uint32_t pg_num, pg_shift, pg_sz, total_size;
-	const struct rte_memzone *mz;
-	char mz_name[RTE_MEMZONE_NAMESIZE];
-	int mz_flags = RTE_MEMZONE_1GB|RTE_MEMZONE_SIZE_HINT_ONLY;
-
-	pg_sz = RTE_PGSIZE_2M;
-
-	pg_shift = rte_bsf32(pg_sz);
-	total_size = rte_mempool_calc_obj_size(elt_size, flags, NULL);
-
-	/* calc max memory size and max number of pages needed. */
-	sz = rte_mempool_xmem_size(elt_num, total_size, pg_shift) +
-		RTE_PGSIZE_2M;
-	pg_num = sz >> pg_shift;
-
-	/* extract physical mappings of the allocated memory. */
-	pa = calloc(pg_num, sizeof (*pa));
-	if (pa == NULL)
-		return mp;
-
-	snprintf(mz_name, sizeof(mz_name), RTE_MEMPOOL_OBJ_NAME, name);
-	mz = rte_memzone_reserve(mz_name, sz, socket_id, mz_flags);
-	if (mz == NULL) {
-		free(pa);
-		return mp;
-	}
-
-	va = (char *)RTE_ALIGN_CEIL((uintptr_t)mz->addr, RTE_PGSIZE_2M);
-	/* extract physical mappings of the allocated memory. */
-	get_phys_map(va, pa, pg_num, pg_sz, mz->memseg_id);
-
-	mp = rte_mempool_xmem_create(name, elt_num, elt_size,
-		cache_size, private_data_size,
-		mp_init, mp_init_arg,
-		obj_init, obj_init_arg,
-		socket_id, flags, va, pa, pg_num, pg_shift);
-
-	free(pa);
-
-	return (mp);
-}
diff --git a/lib/librte_mempool/rte_mempool.c b/lib/librte_mempool/rte_mempool.c
deleted file mode 100644
index 4cf6c25..0000000
--- a/lib/librte_mempool/rte_mempool.c
+++ /dev/null
@@ -1,901 +0,0 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdint.h>
-#include <stdarg.h>
-#include <unistd.h>
-#include <inttypes.h>
-#include <errno.h>
-#include <sys/queue.h>
-
-#include <rte_common.h>
-#include <rte_log.h>
-#include <rte_debug.h>
-#include <rte_memory.h>
-#include <rte_memzone.h>
-#include <rte_malloc.h>
-#include <rte_atomic.h>
-#include <rte_launch.h>
-#include <rte_tailq.h>
-#include <rte_eal.h>
-#include <rte_eal_memconfig.h>
-#include <rte_per_lcore.h>
-#include <rte_lcore.h>
-#include <rte_branch_prediction.h>
-#include <rte_ring.h>
-#include <rte_errno.h>
-#include <rte_string_fns.h>
-#include <rte_spinlock.h>
-
-#include "rte_mempool.h"
-
-TAILQ_HEAD(rte_mempool_list, rte_tailq_entry);
-
-#define CACHE_FLUSHTHRESH_MULTIPLIER 1.5
-
-/*
- * return the greatest common divisor between a and b (fast algorithm)
- *
- */
-static unsigned get_gcd(unsigned a, unsigned b)
-{
-	unsigned c;
-
-	if (0 == a)
-		return b;
-	if (0 == b)
-		return a;
-
-	if (a < b) {
-		c = a;
-		a = b;
-		b = c;
-	}
-
-	while (b != 0) {
-		c = a % b;
-		a = b;
-		b = c;
-	}
-
-	return a;
-}
-
-/*
- * Depending on memory configuration, objects addresses are spread
- * between channels and ranks in RAM: the pool allocator will add
- * padding between objects. This function return the new size of the
- * object.
- */
-static unsigned optimize_object_size(unsigned obj_size)
-{
-	unsigned nrank, nchan;
-	unsigned new_obj_size;
-
-	/* get number of channels */
-	nchan = rte_memory_get_nchannel();
-	if (nchan == 0)
-		nchan = 1;
-
-	nrank = rte_memory_get_nrank();
-	if (nrank == 0)
-		nrank = 1;
-
-	/* process new object size */
-	new_obj_size = (obj_size + RTE_CACHE_LINE_MASK) / RTE_CACHE_LINE_SIZE;
-	while (get_gcd(new_obj_size, nrank * nchan) != 1)
-		new_obj_size++;
-	return new_obj_size * RTE_CACHE_LINE_SIZE;
-}
-
-static void
-mempool_add_elem(struct rte_mempool *mp, void *obj, uint32_t obj_idx,
-	rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg)
-{
-	struct rte_mempool **mpp;
-
-	obj = (char *)obj + mp->header_size;
-
-	/* set mempool ptr in header */
-	mpp = __mempool_from_obj(obj);
-	*mpp = mp;
-
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	__mempool_write_header_cookie(obj, 1);
-	__mempool_write_trailer_cookie(obj);
-#endif
-	/* call the initializer */
-	if (obj_init)
-		obj_init(mp, obj_init_arg, obj, obj_idx);
-
-	/* enqueue in ring */
-	rte_ring_sp_enqueue(mp->ring, obj);
-}
-
-uint32_t
-rte_mempool_obj_iter(void *vaddr, uint32_t elt_num, size_t elt_sz, size_t align,
-	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
-	rte_mempool_obj_iter_t obj_iter, void *obj_iter_arg)
-{
-	uint32_t i, j, k;
-	uint32_t pgn;
-	uintptr_t end, start, va;
-	uintptr_t pg_sz;
-
-	pg_sz = (uintptr_t)1 << pg_shift;
-	va = (uintptr_t)vaddr;
-
-	i = 0;
-	j = 0;
-
-	while (i != elt_num && j != pg_num) {
-
-		start = RTE_ALIGN_CEIL(va, align);
-		end = start + elt_sz;
-
-		pgn = (end >> pg_shift) - (start >> pg_shift);
-		pgn += j;
-
-		/* do we have enough space left for the next element. */
-		if (pgn >= pg_num)
-			break;
-
-		for (k = j;
-				k != pgn &&
-				paddr[k] + pg_sz == paddr[k + 1];
-				k++)
-			;
-
-		/*
-		 * if next pgn chunks of memory physically continuous,
-		 * use it to create next element.
-		 * otherwise, just skip that chunk unused.
-		 */
-		if (k == pgn) {
-			if (obj_iter != NULL)
-				obj_iter(obj_iter_arg, (void *)start,
-					(void *)end, i);
-			va = end;
-			j = pgn;
-			i++;
-		} else {
-			va = RTE_ALIGN_CEIL((va + 1), pg_sz);
-			j++;
-		}
-	}
-
-	return (i);
-}
-
-/*
- * Populate  mempool with the objects.
- */
-
-struct mempool_populate_arg {
-	struct rte_mempool     *mp;
-	rte_mempool_obj_ctor_t *obj_init;
-	void                   *obj_init_arg;
-};
-
-static void
-mempool_obj_populate(void *arg, void *start, void *end, uint32_t idx)
-{
-	struct mempool_populate_arg *pa = arg;
-
-	mempool_add_elem(pa->mp, start, idx, pa->obj_init, pa->obj_init_arg);
-	pa->mp->elt_va_end = (uintptr_t)end;
-}
-
-static void
-mempool_populate(struct rte_mempool *mp, size_t num, size_t align,
-	rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg)
-{
-	uint32_t elt_sz;
-	struct mempool_populate_arg arg;
-
-	elt_sz = mp->elt_size + mp->header_size + mp->trailer_size;
-	arg.mp = mp;
-	arg.obj_init = obj_init;
-	arg.obj_init_arg = obj_init_arg;
-
-	mp->size = rte_mempool_obj_iter((void *)mp->elt_va_start,
-		num, elt_sz, align,
-		mp->elt_pa, mp->pg_num, mp->pg_shift,
-		mempool_obj_populate, &arg);
-}
-
-uint32_t
-rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags,
-	struct rte_mempool_objsz *sz)
-{
-	struct rte_mempool_objsz lsz;
-
-	sz = (sz != NULL) ? sz : &lsz;
-
-	/*
-	 * In header, we have at least the pointer to the pool, and
-	 * optionaly a 64 bits cookie.
-	 */
-	sz->header_size = 0;
-	sz->header_size += sizeof(struct rte_mempool *); /* ptr to pool */
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	sz->header_size += sizeof(uint64_t); /* cookie */
-#endif
-	if ((flags & MEMPOOL_F_NO_CACHE_ALIGN) == 0)
-		sz->header_size = RTE_ALIGN_CEIL(sz->header_size,
-			RTE_CACHE_LINE_SIZE);
-
-	/* trailer contains the cookie in debug mode */
-	sz->trailer_size = 0;
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	sz->trailer_size += sizeof(uint64_t); /* cookie */
-#endif
-	/* element size is 8 bytes-aligned at least */
-	sz->elt_size = RTE_ALIGN_CEIL(elt_size, sizeof(uint64_t));
-
-	/* expand trailer to next cache line */
-	if ((flags & MEMPOOL_F_NO_CACHE_ALIGN) == 0) {
-		sz->total_size = sz->header_size + sz->elt_size +
-			sz->trailer_size;
-		sz->trailer_size += ((RTE_CACHE_LINE_SIZE -
-				  (sz->total_size & RTE_CACHE_LINE_MASK)) &
-				 RTE_CACHE_LINE_MASK);
-	}
-
-	/*
-	 * increase trailer to add padding between objects in order to
-	 * spread them across memory channels/ranks
-	 */
-	if ((flags & MEMPOOL_F_NO_SPREAD) == 0) {
-		unsigned new_size;
-		new_size = optimize_object_size(sz->header_size + sz->elt_size +
-			sz->trailer_size);
-		sz->trailer_size = new_size - sz->header_size - sz->elt_size;
-	}
-
-	if (! rte_eal_has_hugepages()) {
-		/*
-		 * compute trailer size so that pool elements fit exactly in
-		 * a standard page
-		 */
-		int page_size = getpagesize();
-		int new_size = page_size - sz->header_size - sz->elt_size;
-		if (new_size < 0 || (unsigned int)new_size < sz->trailer_size) {
-			printf("When hugepages are disabled, pool objects "
-			       "can't exceed PAGE_SIZE: %d + %d + %d > %d\n",
-			       sz->header_size, sz->elt_size, sz->trailer_size,
-			       page_size);
-			return 0;
-		}
-		sz->trailer_size = new_size;
-	}
-
-	/* this is the size of an object, including header and trailer */
-	sz->total_size = sz->header_size + sz->elt_size + sz->trailer_size;
-
-	return (sz->total_size);
-}
-
-
-/*
- * Calculate maximum amount of memory required to store given number of objects.
- */
-size_t
-rte_mempool_xmem_size(uint32_t elt_num, size_t elt_sz, uint32_t pg_shift)
-{
-	size_t n, pg_num, pg_sz, sz;
-
-	pg_sz = (size_t)1 << pg_shift;
-
-	if ((n = pg_sz / elt_sz) > 0) {
-		pg_num = (elt_num + n - 1) / n;
-		sz = pg_num << pg_shift;
-	} else {
-		sz = RTE_ALIGN_CEIL(elt_sz, pg_sz) * elt_num;
-	}
-
-	return (sz);
-}
-
-/*
- * Calculate how much memory would be actually required with the
- * given memory footprint to store required number of elements.
- */
-static void
-mempool_lelem_iter(void *arg, __rte_unused void *start, void *end,
-        __rte_unused uint32_t idx)
-{
-        *(uintptr_t *)arg = (uintptr_t)end;
-}
-
-ssize_t
-rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, size_t elt_sz,
-	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift)
-{
-	uint32_t n;
-	uintptr_t va, uv;
-	size_t pg_sz, usz;
-
-	pg_sz = (size_t)1 << pg_shift;
-	va = (uintptr_t)vaddr;
-	uv = va;
-
-	if ((n = rte_mempool_obj_iter(vaddr, elt_num, elt_sz, 1,
-			paddr, pg_num, pg_shift, mempool_lelem_iter,
-			&uv)) != elt_num) {
-		return (-n);
-	}
-
-	uv = RTE_ALIGN_CEIL(uv, pg_sz);
-	usz = uv - va;
-	return (usz);
-}
-
-/* create the mempool */
-struct rte_mempool *
-rte_mempool_create(const char *name, unsigned n, unsigned elt_size,
-		   unsigned cache_size, unsigned private_data_size,
-		   rte_mempool_ctor_t *mp_init, void *mp_init_arg,
-		   rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
-		   int socket_id, unsigned flags)
-{
-#ifdef RTE_LIBRTE_XEN_DOM0
-	return (rte_dom0_mempool_create(name, n, elt_size,
-		cache_size, private_data_size,
-		mp_init, mp_init_arg,
-		obj_init, obj_init_arg,
-		socket_id, flags));
-#else
-	return (rte_mempool_xmem_create(name, n, elt_size,
-		cache_size, private_data_size,
-		mp_init, mp_init_arg,
-		obj_init, obj_init_arg,
-		socket_id, flags,
-		NULL, NULL, MEMPOOL_PG_NUM_DEFAULT, MEMPOOL_PG_SHIFT_MAX));
-#endif
-}
-
-/*
- * Create the mempool over already allocated chunk of memory.
- * That external memory buffer can consists of physically disjoint pages.
- * Setting vaddr to NULL, makes mempool to fallback to original behaviour
- * and allocate space for mempool and it's elements as one big chunk of
- * physically continuos memory.
- * */
-struct rte_mempool *
-rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
-		unsigned cache_size, unsigned private_data_size,
-		rte_mempool_ctor_t *mp_init, void *mp_init_arg,
-		rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
-		int socket_id, unsigned flags, void *vaddr,
-		const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift)
-{
-	char mz_name[RTE_MEMZONE_NAMESIZE];
-	char rg_name[RTE_RING_NAMESIZE];
-	struct rte_mempool *mp = NULL;
-	struct rte_tailq_entry *te;
-	struct rte_ring *r;
-	const struct rte_memzone *mz;
-	size_t mempool_size;
-	int mz_flags = RTE_MEMZONE_1GB|RTE_MEMZONE_SIZE_HINT_ONLY;
-	int rg_flags = 0;
-	void *obj;
-	struct rte_mempool_objsz objsz;
-	void *startaddr;
-	int page_size = getpagesize();
-
-	/* compilation-time checks */
-	RTE_BUILD_BUG_ON((sizeof(struct rte_mempool) &
-			  RTE_CACHE_LINE_MASK) != 0);
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	RTE_BUILD_BUG_ON((sizeof(struct rte_mempool_cache) &
-			  RTE_CACHE_LINE_MASK) != 0);
-	RTE_BUILD_BUG_ON((offsetof(struct rte_mempool, local_cache) &
-			  RTE_CACHE_LINE_MASK) != 0);
-#endif
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	RTE_BUILD_BUG_ON((sizeof(struct rte_mempool_debug_stats) &
-			  RTE_CACHE_LINE_MASK) != 0);
-	RTE_BUILD_BUG_ON((offsetof(struct rte_mempool, stats) &
-			  RTE_CACHE_LINE_MASK) != 0);
-#endif
-
-	/* check that we have an initialised tail queue */
-	if (RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL,
-			rte_mempool_list) == NULL) {
-		rte_errno = E_RTE_NO_TAILQ;
-		return NULL;
-	}
-
-	/* asked cache too big */
-	if (cache_size > RTE_MEMPOOL_CACHE_MAX_SIZE) {
-		rte_errno = EINVAL;
-		return NULL;
-	}
-
-	/* check that we have both VA and PA */
-	if (vaddr != NULL && paddr == NULL) {
-		rte_errno = EINVAL;
-		return NULL;
-	}
-
-	/* Check that pg_num and pg_shift parameters are valid. */
-	if (pg_num < RTE_DIM(mp->elt_pa) || pg_shift > MEMPOOL_PG_SHIFT_MAX) {
-		rte_errno = EINVAL;
-		return NULL;
-	}
-
-	/* "no cache align" imply "no spread" */
-	if (flags & MEMPOOL_F_NO_CACHE_ALIGN)
-		flags |= MEMPOOL_F_NO_SPREAD;
-
-	/* ring flags */
-	if (flags & MEMPOOL_F_SP_PUT)
-		rg_flags |= RING_F_SP_ENQ;
-	if (flags & MEMPOOL_F_SC_GET)
-		rg_flags |= RING_F_SC_DEQ;
-
-	/* calculate mempool object sizes. */
-	if (!rte_mempool_calc_obj_size(elt_size, flags, &objsz)) {
-		rte_errno = EINVAL;
-		return NULL;
-	}
-
-	rte_rwlock_write_lock(RTE_EAL_MEMPOOL_RWLOCK);
-
-	/* allocate the ring that will be used to store objects */
-	/* Ring functions will return appropriate errors if we are
-	 * running as a secondary process etc., so no checks made
-	 * in this function for that condition */
-	snprintf(rg_name, sizeof(rg_name), RTE_MEMPOOL_MZ_FORMAT, name);
-	r = rte_ring_create(rg_name, rte_align32pow2(n+1), socket_id, rg_flags);
-	if (r == NULL)
-		goto exit;
-
-	/*
-	 * reserve a memory zone for this mempool: private data is
-	 * cache-aligned
-	 */
-	private_data_size = (private_data_size +
-			     RTE_CACHE_LINE_MASK) & (~RTE_CACHE_LINE_MASK);
-
-	if (! rte_eal_has_hugepages()) {
-		/*
-		 * expand private data size to a whole page, so that the
-		 * first pool element will start on a new standard page
-		 */
-		int head = sizeof(struct rte_mempool);
-		int new_size = (private_data_size + head) % page_size;
-		if (new_size) {
-			private_data_size += page_size - new_size;
-		}
-	}
-
-	/* try to allocate tailq entry */
-	te = rte_zmalloc("MEMPOOL_TAILQ_ENTRY", sizeof(*te), 0);
-	if (te == NULL) {
-		RTE_LOG(ERR, MEMPOOL, "Cannot allocate tailq entry!\n");
-		goto exit;
-	}
-
-	/*
-	 * If user provided an external memory buffer, then use it to
-	 * store mempool objects. Otherwise reserve memzone big enough to
-	 * hold mempool header and metadata plus mempool objects.
-	 */
-	mempool_size = MEMPOOL_HEADER_SIZE(mp, pg_num) + private_data_size;
-	if (vaddr == NULL)
-		mempool_size += (size_t)objsz.total_size * n;
-
-	if (! rte_eal_has_hugepages()) {
-		/*
-		 * we want the memory pool to start on a page boundary,
-		 * because pool elements crossing page boundaries would
-		 * result in discontiguous physical addresses
-		 */
-		mempool_size += page_size;
-	}
-
-	snprintf(mz_name, sizeof(mz_name), RTE_MEMPOOL_MZ_FORMAT, name);
-
-	mz = rte_memzone_reserve(mz_name, mempool_size, socket_id, mz_flags);
-
-	/*
-	 * no more memory: in this case we loose previously reserved
-	 * space for the as we cannot free it
-	 */
-	if (mz == NULL) {
-		rte_free(te);
-		goto exit;
-	}
-
-	if (rte_eal_has_hugepages()) {
-		startaddr = (void*)mz->addr;
-	} else {
-		/* align memory pool start address on a page boundary */
-		unsigned long addr = (unsigned long)mz->addr;
-		if (addr & (page_size - 1)) {
-			addr += page_size;
-			addr &= ~(page_size - 1);
-		}
-		startaddr = (void*)addr;
-	}
-
-	/* init the mempool structure */
-	mp = startaddr;
-	memset(mp, 0, sizeof(*mp));
-	snprintf(mp->name, sizeof(mp->name), "%s", name);
-	mp->phys_addr = mz->phys_addr;
-	mp->ring = r;
-	mp->size = n;
-	mp->flags = flags;
-	mp->elt_size = objsz.elt_size;
-	mp->header_size = objsz.header_size;
-	mp->trailer_size = objsz.trailer_size;
-	mp->cache_size = cache_size;
-	mp->cache_flushthresh = (uint32_t)
-		(cache_size * CACHE_FLUSHTHRESH_MULTIPLIER);
-	mp->private_data_size = private_data_size;
-
-	/* calculate address of the first element for continuous mempool. */
-	obj = (char *)mp + MEMPOOL_HEADER_SIZE(mp, pg_num) +
-		private_data_size;
-
-	/* populate address translation fields. */
-	mp->pg_num = pg_num;
-	mp->pg_shift = pg_shift;
-	mp->pg_mask = RTE_LEN2MASK(mp->pg_shift, typeof(mp->pg_mask));
-
-	/* mempool elements allocated together with mempool */
-	if (vaddr == NULL) {
-		mp->elt_va_start = (uintptr_t)obj;
-		mp->elt_pa[0] = mp->phys_addr +
-			(mp->elt_va_start - (uintptr_t)mp);
-
-	/* mempool elements in a separate chunk of memory. */
-	} else {
-		mp->elt_va_start = (uintptr_t)vaddr;
-		memcpy(mp->elt_pa, paddr, sizeof (mp->elt_pa[0]) * pg_num);
-	}
-
-	mp->elt_va_end = mp->elt_va_start;
-
-	/* call the initializer */
-	if (mp_init)
-		mp_init(mp, mp_init_arg);
-
-	mempool_populate(mp, n, 1, obj_init, obj_init_arg);
-
-	te->data = (void *) mp;
-
-	RTE_EAL_TAILQ_INSERT_TAIL(RTE_TAILQ_MEMPOOL, rte_mempool_list, te);
-
-exit:
-	rte_rwlock_write_unlock(RTE_EAL_MEMPOOL_RWLOCK);
-
-	return mp;
-}
-
-/* Return the number of entries in the mempool */
-unsigned
-rte_mempool_count(const struct rte_mempool *mp)
-{
-	unsigned count;
-
-	count = rte_ring_count(mp->ring);
-
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	{
-		unsigned lcore_id;
-		if (mp->cache_size == 0)
-			return count;
-
-		for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
-			count += mp->local_cache[lcore_id].len;
-	}
-#endif
-
-	/*
-	 * due to race condition (access to len is not locked), the
-	 * total can be greater than size... so fix the result
-	 */
-	if (count > mp->size)
-		return mp->size;
-	return count;
-}
-
-/* dump the cache status */
-static unsigned
-rte_mempool_dump_cache(FILE *f, const struct rte_mempool *mp)
-{
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	unsigned lcore_id;
-	unsigned count = 0;
-	unsigned cache_count;
-
-	fprintf(f, "  cache infos:\n");
-	fprintf(f, "    cache_size=%"PRIu32"\n", mp->cache_size);
-	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
-		cache_count = mp->local_cache[lcore_id].len;
-		fprintf(f, "    cache_count[%u]=%u\n", lcore_id, cache_count);
-		count += cache_count;
-	}
-	fprintf(f, "    total_cache_count=%u\n", count);
-	return count;
-#else
-	RTE_SET_USED(mp);
-	fprintf(f, "  cache disabled\n");
-	return 0;
-#endif
-}
-
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-/* check cookies before and after objects */
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic ignored "-Wcast-qual"
-#endif
-
-struct mempool_audit_arg {
-	const struct rte_mempool *mp;
-	uintptr_t obj_end;
-	uint32_t obj_num;
-};
-
-static void
-mempool_obj_audit(void *arg, void *start, void *end, uint32_t idx)
-{
-	struct mempool_audit_arg *pa = arg;
-	void *obj;
-
-	obj = (char *)start + pa->mp->header_size;
-	pa->obj_end = (uintptr_t)end;
-	pa->obj_num = idx + 1;
-	__mempool_check_cookies(pa->mp, &obj, 1, 2);
-}
-
-static void
-mempool_audit_cookies(const struct rte_mempool *mp)
-{
-	uint32_t elt_sz, num;
-	struct mempool_audit_arg arg;
-
-	elt_sz = mp->elt_size + mp->header_size + mp->trailer_size;
-
-	arg.mp = mp;
-	arg.obj_end = mp->elt_va_start;
-	arg.obj_num = 0;
-
-	num = rte_mempool_obj_iter((void *)mp->elt_va_start,
-		mp->size, elt_sz, 1,
-		mp->elt_pa, mp->pg_num, mp->pg_shift,
-		mempool_obj_audit, &arg);
-
-	if (num != mp->size) {
-			rte_panic("rte_mempool_obj_iter(mempool=%p, size=%u) "
-			"iterated only over %u elements\n",
-			mp, mp->size, num);
-	} else if (arg.obj_end != mp->elt_va_end || arg.obj_num != mp->size) {
-			rte_panic("rte_mempool_obj_iter(mempool=%p, size=%u) "
-			"last callback va_end: %#tx (%#tx expeceted), "
-			"num of objects: %u (%u expected)\n",
-			mp, mp->size,
-			arg.obj_end, mp->elt_va_end,
-			arg.obj_num, mp->size);
-	}
-}
-
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic error "-Wcast-qual"
-#endif
-#else
-#define mempool_audit_cookies(mp) do {} while(0)
-#endif
-
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-/* check cookies before and after objects */
-static void
-mempool_audit_cache(const struct rte_mempool *mp)
-{
-	/* check cache size consistency */
-	unsigned lcore_id;
-	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
-		if (mp->local_cache[lcore_id].len > mp->cache_flushthresh) {
-			RTE_LOG(CRIT, MEMPOOL, "badness on cache[%u]\n",
-				lcore_id);
-			rte_panic("MEMPOOL: invalid cache len\n");
-		}
-	}
-}
-#else
-#define mempool_audit_cache(mp) do {} while(0)
-#endif
-
-
-/* check the consistency of mempool (size, cookies, ...) */
-void
-rte_mempool_audit(const struct rte_mempool *mp)
-{
-	mempool_audit_cache(mp);
-	mempool_audit_cookies(mp);
-
-	/* For case where mempool DEBUG is not set, and cache size is 0 */
-	RTE_SET_USED(mp);
-}
-
-/* dump the status of the mempool on the console */
-void
-rte_mempool_dump(FILE *f, const struct rte_mempool *mp)
-{
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	struct rte_mempool_debug_stats sum;
-	unsigned lcore_id;
-#endif
-	unsigned common_count;
-	unsigned cache_count;
-
-	RTE_VERIFY(f != NULL);
-	RTE_VERIFY(mp != NULL);
-
-	fprintf(f, "mempool <%s>@%p\n", mp->name, mp);
-	fprintf(f, "  flags=%x\n", mp->flags);
-	fprintf(f, "  ring=<%s>@%p\n", mp->ring->name, mp->ring);
-	fprintf(f, "  phys_addr=0x%" PRIx64 "\n", mp->phys_addr);
-	fprintf(f, "  size=%"PRIu32"\n", mp->size);
-	fprintf(f, "  header_size=%"PRIu32"\n", mp->header_size);
-	fprintf(f, "  elt_size=%"PRIu32"\n", mp->elt_size);
-	fprintf(f, "  trailer_size=%"PRIu32"\n", mp->trailer_size);
-	fprintf(f, "  total_obj_size=%"PRIu32"\n",
-	       mp->header_size + mp->elt_size + mp->trailer_size);
-
-	fprintf(f, "  private_data_size=%"PRIu32"\n", mp->private_data_size);
-	fprintf(f, "  pg_num=%"PRIu32"\n", mp->pg_num);
-	fprintf(f, "  pg_shift=%"PRIu32"\n", mp->pg_shift);
-	fprintf(f, "  pg_mask=%#tx\n", mp->pg_mask);
-	fprintf(f, "  elt_va_start=%#tx\n", mp->elt_va_start);
-	fprintf(f, "  elt_va_end=%#tx\n", mp->elt_va_end);
-	fprintf(f, "  elt_pa[0]=0x%" PRIx64 "\n", mp->elt_pa[0]);
-
-	if (mp->size != 0)
-		fprintf(f, "  avg bytes/object=%#Lf\n",
-			(long double)(mp->elt_va_end - mp->elt_va_start) /
-			mp->size);
-
-	cache_count = rte_mempool_dump_cache(f, mp);
-	common_count = rte_ring_count(mp->ring);
-	if ((cache_count + common_count) > mp->size)
-		common_count = mp->size - cache_count;
-	fprintf(f, "  common_pool_count=%u\n", common_count);
-
-	/* sum and dump statistics */
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	memset(&sum, 0, sizeof(sum));
-	for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
-		sum.put_bulk += mp->stats[lcore_id].put_bulk;
-		sum.put_objs += mp->stats[lcore_id].put_objs;
-		sum.get_success_bulk += mp->stats[lcore_id].get_success_bulk;
-		sum.get_success_objs += mp->stats[lcore_id].get_success_objs;
-		sum.get_fail_bulk += mp->stats[lcore_id].get_fail_bulk;
-		sum.get_fail_objs += mp->stats[lcore_id].get_fail_objs;
-	}
-	fprintf(f, "  stats:\n");
-	fprintf(f, "    put_bulk=%"PRIu64"\n", sum.put_bulk);
-	fprintf(f, "    put_objs=%"PRIu64"\n", sum.put_objs);
-	fprintf(f, "    get_success_bulk=%"PRIu64"\n", sum.get_success_bulk);
-	fprintf(f, "    get_success_objs=%"PRIu64"\n", sum.get_success_objs);
-	fprintf(f, "    get_fail_bulk=%"PRIu64"\n", sum.get_fail_bulk);
-	fprintf(f, "    get_fail_objs=%"PRIu64"\n", sum.get_fail_objs);
-#else
-	fprintf(f, "  no statistics available\n");
-#endif
-
-	rte_mempool_audit(mp);
-}
-
-/* dump the status of all mempools on the console */
-void
-rte_mempool_list_dump(FILE *f)
-{
-	const struct rte_mempool *mp = NULL;
-	struct rte_tailq_entry *te;
-	struct rte_mempool_list *mempool_list;
-
-	if ((mempool_list =
-	     RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL, rte_mempool_list)) == NULL) {
-		rte_errno = E_RTE_NO_TAILQ;
-		return;
-	}
-
-	rte_rwlock_read_lock(RTE_EAL_MEMPOOL_RWLOCK);
-
-	TAILQ_FOREACH(te, mempool_list, next) {
-		mp = (struct rte_mempool *) te->data;
-		rte_mempool_dump(f, mp);
-	}
-
-	rte_rwlock_read_unlock(RTE_EAL_MEMPOOL_RWLOCK);
-}
-
-/* search a mempool from its name */
-struct rte_mempool *
-rte_mempool_lookup(const char *name)
-{
-	struct rte_mempool *mp = NULL;
-	struct rte_tailq_entry *te;
-	struct rte_mempool_list *mempool_list;
-
-	if ((mempool_list =
-	     RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL, rte_mempool_list)) == NULL) {
-		rte_errno = E_RTE_NO_TAILQ;
-		return NULL;
-	}
-
-	rte_rwlock_read_lock(RTE_EAL_MEMPOOL_RWLOCK);
-
-	TAILQ_FOREACH(te, mempool_list, next) {
-		mp = (struct rte_mempool *) te->data;
-		if (strncmp(name, mp->name, RTE_MEMPOOL_NAMESIZE) == 0)
-			break;
-	}
-
-	rte_rwlock_read_unlock(RTE_EAL_MEMPOOL_RWLOCK);
-
-	if (te == NULL) {
-		rte_errno = ENOENT;
-		return NULL;
-	}
-
-	return mp;
-}
-
-void rte_mempool_walk(void (*func)(const struct rte_mempool *, void *),
-		      void *arg)
-{
-	struct rte_tailq_entry *te = NULL;
-	struct rte_mempool_list *mempool_list;
-
-	if ((mempool_list =
-	     RTE_TAILQ_LOOKUP_BY_IDX(RTE_TAILQ_MEMPOOL, rte_mempool_list)) == NULL) {
-		rte_errno = E_RTE_NO_TAILQ;
-		return;
-	}
-
-	rte_rwlock_read_lock(RTE_EAL_MEMPOOL_RWLOCK);
-
-	TAILQ_FOREACH(te, mempool_list, next) {
-		(*func)((struct rte_mempool *) te->data, arg);
-	}
-
-	rte_rwlock_read_unlock(RTE_EAL_MEMPOOL_RWLOCK);
-}
diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
deleted file mode 100644
index 3314651..0000000
--- a/lib/librte_mempool/rte_mempool.h
+++ /dev/null
@@ -1,1392 +0,0 @@
-/*-
- *   BSD LICENSE
- *
- *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- *   All rights reserved.
- *
- *   Redistribution and use in source and binary forms, with or without
- *   modification, are permitted provided that the following conditions
- *   are met:
- *
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in
- *       the documentation and/or other materials provided with the
- *       distribution.
- *     * Neither the name of Intel Corporation nor the names of its
- *       contributors may be used to endorse or promote products derived
- *       from this software without specific prior written permission.
- *
- *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _RTE_MEMPOOL_H_
-#define _RTE_MEMPOOL_H_
-
-/**
- * @file
- * RTE Mempool.
- *
- * A memory pool is an allocator of fixed-size object. It is
- * identified by its name, and uses a ring to store free objects. It
- * provides some other optional services, like a per-core object
- * cache, and an alignment helper to ensure that objects are padded
- * to spread them equally on all RAM channels, ranks, and so on.
- *
- * Objects owned by a mempool should never be added in another
- * mempool. When an object is freed using rte_mempool_put() or
- * equivalent, the object data is not modified; the user can save some
- * meta-data in the object data and retrieve them when allocating a
- * new object.
- *
- * Note: the mempool implementation is not preemptable. A lcore must
- * not be interrupted by another task that uses the same mempool
- * (because it uses a ring which is not preemptable). Also, mempool
- * functions must not be used outside the DPDK environment: for
- * example, in linuxapp environment, a thread that is not created by
- * the EAL must not use mempools. This is due to the per-lcore cache
- * that won't work as rte_lcore_id() will not return a correct value.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <errno.h>
-#include <inttypes.h>
-#include <sys/queue.h>
-
-#include <rte_log.h>
-#include <rte_debug.h>
-#include <rte_lcore.h>
-#include <rte_memory.h>
-#include <rte_branch_prediction.h>
-#include <rte_ring.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define RTE_MEMPOOL_HEADER_COOKIE1  0xbadbadbadadd2e55ULL /**< Header cookie. */
-#define RTE_MEMPOOL_HEADER_COOKIE2  0xf2eef2eedadd2e55ULL /**< Header cookie. */
-#define RTE_MEMPOOL_TRAILER_COOKIE  0xadd2e55badbadbadULL /**< Trailer cookie.*/
-
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-/**
- * A structure that stores the mempool statistics (per-lcore).
- */
-struct rte_mempool_debug_stats {
-	uint64_t put_bulk;         /**< Number of puts. */
-	uint64_t put_objs;         /**< Number of objects successfully put. */
-	uint64_t get_success_bulk; /**< Successful allocation number. */
-	uint64_t get_success_objs; /**< Objects successfully allocated. */
-	uint64_t get_fail_bulk;    /**< Failed allocation number. */
-	uint64_t get_fail_objs;    /**< Objects that failed to be allocated. */
-} __rte_cache_aligned;
-#endif
-
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-/**
- * A structure that stores a per-core object cache.
- */
-struct rte_mempool_cache {
-	unsigned len; /**< Cache len */
-	/*
-	 * Cache is allocated to this size to allow it to overflow in certain
-	 * cases to avoid needless emptying of cache.
-	 */
-	void *objs[RTE_MEMPOOL_CACHE_MAX_SIZE * 3]; /**< Cache objects */
-} __rte_cache_aligned;
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
-
-struct rte_mempool_objsz {
-	uint32_t elt_size;     /**< Size of an element. */
-	uint32_t header_size;  /**< Size of header (before elt). */
-	uint32_t trailer_size; /**< Size of trailer (after elt). */
-	uint32_t total_size;
-	/**< Total size of an object (header + elt + trailer). */
-};
-
-#define RTE_MEMPOOL_NAMESIZE 32 /**< Maximum length of a memory pool. */
-#define RTE_MEMPOOL_MZ_PREFIX "MP_"
-
-/* "MP_<name>" */
-#define	RTE_MEMPOOL_MZ_FORMAT	RTE_MEMPOOL_MZ_PREFIX "%s"
-
-#ifdef RTE_LIBRTE_XEN_DOM0
-
-/* "<name>_MP_elt" */
-#define	RTE_MEMPOOL_OBJ_NAME	"%s_" RTE_MEMPOOL_MZ_PREFIX "elt"
-
-#else
-
-#define	RTE_MEMPOOL_OBJ_NAME	RTE_MEMPOOL_MZ_FORMAT
-
-#endif /* RTE_LIBRTE_XEN_DOM0 */
-
-#define	MEMPOOL_PG_SHIFT_MAX	(sizeof(uintptr_t) * CHAR_BIT - 1)
-
-/** Mempool over one chunk of physically continuous memory */
-#define	MEMPOOL_PG_NUM_DEFAULT	1
-
-/**
- * The RTE mempool structure.
- */
-struct rte_mempool {
-	char name[RTE_MEMPOOL_NAMESIZE]; /**< Name of mempool. */
-	struct rte_ring *ring;           /**< Ring to store objects. */
-	phys_addr_t phys_addr;           /**< Phys. addr. of mempool struct. */
-	int flags;                       /**< Flags of the mempool. */
-	uint32_t size;                   /**< Size of the mempool. */
-	uint32_t cache_size;             /**< Size of per-lcore local cache. */
-	uint32_t cache_flushthresh;
-	/**< Threshold before we flush excess elements. */
-
-	uint32_t elt_size;               /**< Size of an element. */
-	uint32_t header_size;            /**< Size of header (before elt). */
-	uint32_t trailer_size;           /**< Size of trailer (after elt). */
-
-	unsigned private_data_size;      /**< Size of private data. */
-
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	/** Per-lcore local cache. */
-	struct rte_mempool_cache local_cache[RTE_MAX_LCORE];
-#endif
-
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	/** Per-lcore statistics. */
-	struct rte_mempool_debug_stats stats[RTE_MAX_LCORE];
-#endif
-
-	/* Address translation support, starts from next cache line. */
-
-	/** Number of elements in the elt_pa array. */
-	uint32_t    pg_num __rte_cache_aligned;
-	uint32_t    pg_shift;     /**< LOG2 of the physical pages. */
-	uintptr_t   pg_mask;      /**< physical page mask value. */
-	uintptr_t   elt_va_start;
-	/**< Virtual address of the first mempool object. */
-	uintptr_t   elt_va_end;
-	/**< Virtual address of the <size + 1> mempool object. */
-	phys_addr_t elt_pa[MEMPOOL_PG_NUM_DEFAULT];
-	/**< Array of physical pages addresses for the mempool objects buffer. */
-
-}  __rte_cache_aligned;
-
-#define MEMPOOL_F_NO_SPREAD      0x0001 /**< Do not spread in memory. */
-#define MEMPOOL_F_NO_CACHE_ALIGN 0x0002 /**< Do not align objs on cache lines.*/
-#define MEMPOOL_F_SP_PUT         0x0004 /**< Default put is "single-producer".*/
-#define MEMPOOL_F_SC_GET         0x0008 /**< Default get is "single-consumer".*/
-
-/**
- * @internal When debug is enabled, store some statistics.
- * @param mp
- *   Pointer to the memory pool.
- * @param name
- *   Name of the statistics field to increment in the memory pool.
- * @param n
- *   Number to add to the object-oriented statistics.
- */
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-#define __MEMPOOL_STAT_ADD(mp, name, n) do {			\
-		unsigned __lcore_id = rte_lcore_id();		\
-		mp->stats[__lcore_id].name##_objs += n;		\
-		mp->stats[__lcore_id].name##_bulk += 1;		\
-	} while(0)
-#else
-#define __MEMPOOL_STAT_ADD(mp, name, n) do {} while(0)
-#endif
-
-/**
- * Calculates size of the mempool header.
- * @param mp
- *   Pointer to the memory pool.
- * @param pgn
- *   Number of page used to store mempool objects.
- */
-#define	MEMPOOL_HEADER_SIZE(mp, pgn)	(sizeof(*(mp)) + \
-	RTE_ALIGN_CEIL(((pgn) - RTE_DIM((mp)->elt_pa)) * \
-	sizeof ((mp)->elt_pa[0]), RTE_CACHE_LINE_SIZE))
-
-/**
- * Returns TRUE if whole mempool is allocated in one contiguous block of memory.
- */
-#define	MEMPOOL_IS_CONTIG(mp)                      \
-	((mp)->pg_num == MEMPOOL_PG_NUM_DEFAULT && \
-	(mp)->phys_addr == (mp)->elt_pa[0])
-
-/**
- * @internal Get a pointer to a mempool pointer in the object header.
- * @param obj
- *   Pointer to object.
- * @return
- *   The pointer to the mempool from which the object was allocated.
- */
-static inline struct rte_mempool **__mempool_from_obj(void *obj)
-{
-	struct rte_mempool **mpp;
-	unsigned off;
-
-	off = sizeof(struct rte_mempool *);
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	off += sizeof(uint64_t);
-#endif
-	mpp = (struct rte_mempool **)((char *)obj - off);
-	return mpp;
-}
-
-/**
- * Return a pointer to the mempool owning this object.
- *
- * @param obj
- *   An object that is owned by a pool. If this is not the case,
- *   the behavior is undefined.
- * @return
- *   A pointer to the mempool structure.
- */
-static inline const struct rte_mempool *rte_mempool_from_obj(void *obj)
-{
-	struct rte_mempool * const *mpp;
-	mpp = __mempool_from_obj(obj);
-	return *mpp;
-}
-
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-/* get header cookie value */
-static inline uint64_t __mempool_read_header_cookie(const void *obj)
-{
-	return *(const uint64_t *)((const char *)obj - sizeof(uint64_t));
-}
-
-/* get trailer cookie value */
-static inline uint64_t __mempool_read_trailer_cookie(void *obj)
-{
-	struct rte_mempool **mpp = __mempool_from_obj(obj);
-	return *(uint64_t *)((char *)obj + (*mpp)->elt_size);
-}
-
-/* write header cookie value */
-static inline void __mempool_write_header_cookie(void *obj, int free)
-{
-	uint64_t *cookie_p;
-	cookie_p = (uint64_t *)((char *)obj - sizeof(uint64_t));
-	if (free == 0)
-		*cookie_p = RTE_MEMPOOL_HEADER_COOKIE1;
-	else
-		*cookie_p = RTE_MEMPOOL_HEADER_COOKIE2;
-
-}
-
-/* write trailer cookie value */
-static inline void __mempool_write_trailer_cookie(void *obj)
-{
-	uint64_t *cookie_p;
-	struct rte_mempool **mpp = __mempool_from_obj(obj);
-	cookie_p = (uint64_t *)((char *)obj + (*mpp)->elt_size);
-	*cookie_p = RTE_MEMPOOL_TRAILER_COOKIE;
-}
-#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
-
-/**
- * @internal Check and update cookies or panic.
- *
- * @param mp
- *   Pointer to the memory pool.
- * @param obj_table_const
- *   Pointer to a table of void * pointers (objects).
- * @param n
- *   Index of object in object table.
- * @param free
- *   - 0: object is supposed to be allocated, mark it as free
- *   - 1: object is supposed to be free, mark it as allocated
- *   - 2: just check that cookie is valid (free or allocated)
- */
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic ignored "-Wcast-qual"
-#endif
-static inline void __mempool_check_cookies(const struct rte_mempool *mp,
-					   void * const *obj_table_const,
-					   unsigned n, int free)
-{
-	uint64_t cookie;
-	void *tmp;
-	void *obj;
-	void **obj_table;
-
-	/* Force to drop the "const" attribute. This is done only when
-	 * DEBUG is enabled */
-	tmp = (void *) obj_table_const;
-	obj_table = (void **) tmp;
-
-	while (n--) {
-		obj = obj_table[n];
-
-		if (rte_mempool_from_obj(obj) != mp)
-			rte_panic("MEMPOOL: object is owned by another "
-				  "mempool\n");
-
-		cookie = __mempool_read_header_cookie(obj);
-
-		if (free == 0) {
-			if (cookie != RTE_MEMPOOL_HEADER_COOKIE1) {
-				rte_log_set_history(0);
-				RTE_LOG(CRIT, MEMPOOL,
-					"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
-					obj, mp, cookie);
-				rte_panic("MEMPOOL: bad header cookie (put)\n");
-			}
-			__mempool_write_header_cookie(obj, 1);
-		}
-		else if (free == 1) {
-			if (cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
-				rte_log_set_history(0);
-				RTE_LOG(CRIT, MEMPOOL,
-					"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
-					obj, mp, cookie);
-				rte_panic("MEMPOOL: bad header cookie (get)\n");
-			}
-			__mempool_write_header_cookie(obj, 0);
-		}
-		else if (free == 2) {
-			if (cookie != RTE_MEMPOOL_HEADER_COOKIE1 &&
-			    cookie != RTE_MEMPOOL_HEADER_COOKIE2) {
-				rte_log_set_history(0);
-				RTE_LOG(CRIT, MEMPOOL,
-					"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
-					obj, mp, cookie);
-				rte_panic("MEMPOOL: bad header cookie (audit)\n");
-			}
-		}
-		cookie = __mempool_read_trailer_cookie(obj);
-		if (cookie != RTE_MEMPOOL_TRAILER_COOKIE) {
-			rte_log_set_history(0);
-			RTE_LOG(CRIT, MEMPOOL,
-				"obj=%p, mempool=%p, cookie=%"PRIx64"\n",
-				obj, mp, cookie);
-			rte_panic("MEMPOOL: bad trailer cookie\n");
-		}
-	}
-}
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic error "-Wcast-qual"
-#endif
-#else
-#define __mempool_check_cookies(mp, obj_table_const, n, free) do {} while(0)
-#endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
-
-/**
- * An mempool's object iterator callback function.
- */
-typedef void (*rte_mempool_obj_iter_t)(void * /*obj_iter_arg*/,
-	void * /*obj_start*/,
-	void * /*obj_end*/,
-	uint32_t /*obj_index */);
-
-/*
- * Iterates across objects of the given size and alignment in the
- * provided chunk of memory. The given memory buffer can consist of
- * disjoint physical pages.
- * For each object calls the provided callback (if any).
- * Used to populate mempool, walk through all elements of the mempool,
- * estimate how many elements of the given size could be created in the given
- * memory buffer.
- * @param vaddr
- *   Virtual address of the memory buffer.
- * @param elt_num
- *   Maximum number of objects to iterate through.
- * @param elt_sz
- *   Size of each object.
- * @param paddr
- *   Array of phyiscall addresses of the pages that comprises given memory
- *   buffer.
- * @param pg_num
- *   Number of elements in the paddr array.
- * @param pg_shift
- *   LOG2 of the physical pages size.
- * @param obj_iter
- *   Object iterator callback function (could be NULL).
- * @param obj_iter_arg
- *   User defined Prameter for the object iterator callback function.
- *
- * @return
- *   Number of objects iterated through.
- */
-
-uint32_t rte_mempool_obj_iter(void *vaddr,
-	uint32_t elt_num, size_t elt_sz, size_t align,
-	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift,
-	rte_mempool_obj_iter_t obj_iter, void *obj_iter_arg);
-
-/**
- * An object constructor callback function for mempool.
- *
- * Arguments are the mempool, the opaque pointer given by the user in
- * rte_mempool_create(), the pointer to the element and the index of
- * the element in the pool.
- */
-typedef void (rte_mempool_obj_ctor_t)(struct rte_mempool *, void *,
-				      void *, unsigned);
-
-/**
- * A mempool constructor callback function.
- *
- * Arguments are the mempool and the opaque pointer given by the user in
- * rte_mempool_create().
- */
-typedef void (rte_mempool_ctor_t)(struct rte_mempool *, void *);
-
-/**
- * Creates a new mempool named *name* in memory.
- *
- * This function uses ``memzone_reserve()`` to allocate memory. The
- * pool contains n elements of elt_size. Its size is set to n.
- * All elements of the mempool are allocated together with the mempool header,
- * in one physically continuous chunk of memory.
- *
- * @param name
- *   The name of the mempool.
- * @param n
- *   The number of elements in the mempool. The optimum size (in terms of
- *   memory usage) for a mempool is when n is a power of two minus one:
- *   n = (2^q - 1).
- * @param elt_size
- *   The size of each element.
- * @param cache_size
- *   If cache_size is non-zero, the rte_mempool library will try to
- *   limit the accesses to the common lockless pool, by maintaining a
- *   per-lcore object cache. This argument must be lower or equal to
- *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
- *   cache_size to have "n modulo cache_size == 0": if this is
- *   not the case, some elements will always stay in the pool and will
- *   never be used. The access to the per-lcore table is of course
- *   faster than the multi-producer/consumer pool. The cache can be
- *   disabled if the cache_size argument is set to 0; it can be useful to
- *   avoid losing objects in cache. Note that even if not used, the
- *   memory space for cache is always reserved in a mempool structure,
- *   except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
- * @param private_data_size
- *   The size of the private data appended after the mempool
- *   structure. This is useful for storing some private data after the
- *   mempool structure, as is done for rte_mbuf_pool for example.
- * @param mp_init
- *   A function pointer that is called for initialization of the pool,
- *   before object initialization. The user can initialize the private
- *   data in this function if needed. This parameter can be NULL if
- *   not needed.
- * @param mp_init_arg
- *   An opaque pointer to data that can be used in the mempool
- *   constructor function.
- * @param obj_init
- *   A function pointer that is called for each object at
- *   initialization of the pool. The user can set some meta data in
- *   objects if needed. This parameter can be NULL if not needed.
- *   The obj_init() function takes the mempool pointer, the init_arg,
- *   the object pointer and the object number as parameters.
- * @param obj_init_arg
- *   An opaque pointer to data that can be used as an argument for
- *   each call to the object constructor function.
- * @param socket_id
- *   The *socket_id* argument is the socket identifier in the case of
- *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
- *   constraint for the reserved zone.
- * @param flags
- *   The *flags* arguments is an OR of following flags:
- *   - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
- *     between channels in RAM: the pool allocator will add padding
- *     between objects depending on the hardware configuration. See
- *     Memory alignment constraints for details. If this flag is set,
- *     the allocator will just align them to a cache line.
- *   - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
- *     cache-aligned. This flag removes this constraint, and no
- *     padding will be present between objects. This flag implies
- *     MEMPOOL_F_NO_SPREAD.
- *   - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
- *     when using rte_mempool_put() or rte_mempool_put_bulk() is
- *     "single-producer". Otherwise, it is "multi-producers".
- *   - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
- *     when using rte_mempool_get() or rte_mempool_get_bulk() is
- *     "single-consumer". Otherwise, it is "multi-consumers".
- * @return
- *   The pointer to the new allocated mempool, on success. NULL on error
- *   with rte_errno set appropriately. Possible rte_errno values include:
- *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
- *    - E_RTE_SECONDARY - function was called from a secondary process instance
- *    - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
- *    - EINVAL - cache size provided is too large
- *    - ENOSPC - the maximum number of memzones has already been allocated
- *    - EEXIST - a memzone with the same name already exists
- *    - ENOMEM - no appropriate memory area found in which to create memzone
- */
-struct rte_mempool *
-rte_mempool_create(const char *name, unsigned n, unsigned elt_size,
-		   unsigned cache_size, unsigned private_data_size,
-		   rte_mempool_ctor_t *mp_init, void *mp_init_arg,
-		   rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
-		   int socket_id, unsigned flags);
-
-/**
- * Creates a new mempool named *name* in memory.
- *
- * This function uses ``memzone_reserve()`` to allocate memory. The
- * pool contains n elements of elt_size. Its size is set to n.
- * Depending on the input parameters, mempool elements can be either allocated
- * together with the mempool header, or an externally provided memory buffer
- * could be used to store mempool objects. In later case, that external
- * memory buffer can consist of set of disjoint phyiscal pages.
- *
- * @param name
- *   The name of the mempool.
- * @param n
- *   The number of elements in the mempool. The optimum size (in terms of
- *   memory usage) for a mempool is when n is a power of two minus one:
- *   n = (2^q - 1).
- * @param elt_size
- *   The size of each element.
- * @param cache_size
- *   If cache_size is non-zero, the rte_mempool library will try to
- *   limit the accesses to the common lockless pool, by maintaining a
- *   per-lcore object cache. This argument must be lower or equal to
- *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
- *   cache_size to have "n modulo cache_size == 0": if this is
- *   not the case, some elements will always stay in the pool and will
- *   never be used. The access to the per-lcore table is of course
- *   faster than the multi-producer/consumer pool. The cache can be
- *   disabled if the cache_size argument is set to 0; it can be useful to
- *   avoid losing objects in cache. Note that even if not used, the
- *   memory space for cache is always reserved in a mempool structure,
- *   except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
- * @param private_data_size
- *   The size of the private data appended after the mempool
- *   structure. This is useful for storing some private data after the
- *   mempool structure, as is done for rte_mbuf_pool for example.
- * @param mp_init
- *   A function pointer that is called for initialization of the pool,
- *   before object initialization. The user can initialize the private
- *   data in this function if needed. This parameter can be NULL if
- *   not needed.
- * @param mp_init_arg
- *   An opaque pointer to data that can be used in the mempool
- *   constructor function.
- * @param obj_init
- *   A function pointer that is called for each object at
- *   initialization of the pool. The user can set some meta data in
- *   objects if needed. This parameter can be NULL if not needed.
- *   The obj_init() function takes the mempool pointer, the init_arg,
- *   the object pointer and the object number as parameters.
- * @param obj_init_arg
- *   An opaque pointer to data that can be used as an argument for
- *   each call to the object constructor function.
- * @param socket_id
- *   The *socket_id* argument is the socket identifier in the case of
- *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
- *   constraint for the reserved zone.
- * @param flags
- *   The *flags* arguments is an OR of following flags:
- *   - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
- *     between channels in RAM: the pool allocator will add padding
- *     between objects depending on the hardware configuration. See
- *     Memory alignment constraints for details. If this flag is set,
- *     the allocator will just align them to a cache line.
- *   - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
- *     cache-aligned. This flag removes this constraint, and no
- *     padding will be present between objects. This flag implies
- *     MEMPOOL_F_NO_SPREAD.
- *   - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
- *     when using rte_mempool_put() or rte_mempool_put_bulk() is
- *     "single-producer". Otherwise, it is "multi-producers".
- *   - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
- *     when using rte_mempool_get() or rte_mempool_get_bulk() is
- *     "single-consumer". Otherwise, it is "multi-consumers".
- * @param vaddr
- *   Virtual address of the externally allocated memory buffer.
- *   Will be used to store mempool objects.
- * @param paddr
- *   Array of phyiscall addresses of the pages that comprises given memory
- *   buffer.
- * @param pg_num
- *   Number of elements in the paddr array.
- * @param pg_shift
- *   LOG2 of the physical pages size.
- * @return
- *   The pointer to the new allocated mempool, on success. NULL on error
- *   with rte_errno set appropriately. Possible rte_errno values include:
- *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
- *    - E_RTE_SECONDARY - function was called from a secondary process instance
- *    - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
- *    - EINVAL - cache size provided is too large
- *    - ENOSPC - the maximum number of memzones has already been allocated
- *    - EEXIST - a memzone with the same name already exists
- *    - ENOMEM - no appropriate memory area found in which to create memzone
- */
-struct rte_mempool *
-rte_mempool_xmem_create(const char *name, unsigned n, unsigned elt_size,
-		unsigned cache_size, unsigned private_data_size,
-		rte_mempool_ctor_t *mp_init, void *mp_init_arg,
-		rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
-		int socket_id, unsigned flags, void *vaddr,
-		const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
-
-#ifdef RTE_LIBRTE_XEN_DOM0
-/**
- * Creates a new mempool named *name* in memory on Xen Dom0.
- *
- * This function uses ``rte_mempool_xmem_create()`` to allocate memory. The
- * pool contains n elements of elt_size. Its size is set to n.
- * All elements of the mempool are allocated together with the mempool header,
- * and memory buffer can consist of set of disjoint phyiscal pages.
- *
- * @param name
- *   The name of the mempool.
- * @param n
- *   The number of elements in the mempool. The optimum size (in terms of
- *   memory usage) for a mempool is when n is a power of two minus one:
- *   n = (2^q - 1).
- * @param elt_size
- *   The size of each element.
- * @param cache_size
- *   If cache_size is non-zero, the rte_mempool library will try to
- *   limit the accesses to the common lockless pool, by maintaining a
- *   per-lcore object cache. This argument must be lower or equal to
- *   CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE. It is advised to choose
- *   cache_size to have "n modulo cache_size == 0": if this is
- *   not the case, some elements will always stay in the pool and will
- *   never be used. The access to the per-lcore table is of course
- *   faster than the multi-producer/consumer pool. The cache can be
- *   disabled if the cache_size argument is set to 0; it can be useful to
- *   avoid losing objects in cache. Note that even if not used, the
- *   memory space for cache is always reserved in a mempool structure,
- *   except if CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE is set to 0.
- * @param private_data_size
- *   The size of the private data appended after the mempool
- *   structure. This is useful for storing some private data after the
- *   mempool structure, as is done for rte_mbuf_pool for example.
- * @param mp_init
- *   A function pointer that is called for initialization of the pool,
- *   before object initialization. The user can initialize the private
- *   data in this function if needed. This parameter can be NULL if
- *   not needed.
- * @param mp_init_arg
- *   An opaque pointer to data that can be used in the mempool
- *   constructor function.
- * @param obj_init
- *   A function pointer that is called for each object at
- *   initialization of the pool. The user can set some meta data in
- *   objects if needed. This parameter can be NULL if not needed.
- *   The obj_init() function takes the mempool pointer, the init_arg,
- *   the object pointer and the object number as parameters.
- * @param obj_init_arg
- *   An opaque pointer to data that can be used as an argument for
- *   each call to the object constructor function.
- * @param socket_id
- *   The *socket_id* argument is the socket identifier in the case of
- *   NUMA. The value can be *SOCKET_ID_ANY* if there is no NUMA
- *   constraint for the reserved zone.
- * @param flags
- *   The *flags* arguments is an OR of following flags:
- *   - MEMPOOL_F_NO_SPREAD: By default, objects addresses are spread
- *     between channels in RAM: the pool allocator will add padding
- *     between objects depending on the hardware configuration. See
- *     Memory alignment constraints for details. If this flag is set,
- *     the allocator will just align them to a cache line.
- *   - MEMPOOL_F_NO_CACHE_ALIGN: By default, the returned objects are
- *     cache-aligned. This flag removes this constraint, and no
- *     padding will be present between objects. This flag implies
- *     MEMPOOL_F_NO_SPREAD.
- *   - MEMPOOL_F_SP_PUT: If this flag is set, the default behavior
- *     when using rte_mempool_put() or rte_mempool_put_bulk() is
- *     "single-producer". Otherwise, it is "multi-producers".
- *   - MEMPOOL_F_SC_GET: If this flag is set, the default behavior
- *     when using rte_mempool_get() or rte_mempool_get_bulk() is
- *     "single-consumer". Otherwise, it is "multi-consumers".
- * @return
- *   The pointer to the new allocated mempool, on success. NULL on error
- *   with rte_errno set appropriately. Possible rte_errno values include:
- *    - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure
- *    - E_RTE_SECONDARY - function was called from a secondary process instance
- *    - E_RTE_NO_TAILQ - no tailq list could be got for the ring or mempool list
- *    - EINVAL - cache size provided is too large
- *    - ENOSPC - the maximum number of memzones has already been allocated
- *    - EEXIST - a memzone with the same name already exists
- *    - ENOMEM - no appropriate memory area found in which to create memzone
- */
-struct rte_mempool *
-rte_dom0_mempool_create(const char *name, unsigned n, unsigned elt_size,
-		unsigned cache_size, unsigned private_data_size,
-		rte_mempool_ctor_t *mp_init, void *mp_init_arg,
-		rte_mempool_obj_ctor_t *obj_init, void *obj_init_arg,
-		int socket_id, unsigned flags);
-#endif
-
-/**
- * Dump the status of the mempool to the console.
- *
- * @param f
- *   A pointer to a file for output
- * @param mp
- *   A pointer to the mempool structure.
- */
-void rte_mempool_dump(FILE *f, const struct rte_mempool *mp);
-
-/**
- * @internal Put several objects back in the mempool; used internally.
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects).
- * @param n
- *   The number of objects to store back in the mempool, must be strictly
- *   positive.
- * @param is_mp
- *   Mono-producer (0) or multi-producers (1).
- */
-static inline void __attribute__((always_inline))
-__mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
-		    unsigned n, int is_mp)
-{
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	struct rte_mempool_cache *cache;
-	uint32_t index;
-	void **cache_objs;
-	unsigned lcore_id = rte_lcore_id();
-	uint32_t cache_size = mp->cache_size;
-	uint32_t flushthresh = mp->cache_flushthresh;
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
-
-	/* increment stat now, adding in mempool always success */
-	__MEMPOOL_STAT_ADD(mp, put, n);
-
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	/* cache is not enabled or single producer */
-	if (unlikely(cache_size == 0 || is_mp == 0))
-		goto ring_enqueue;
-
-	/* Go straight to ring if put would overflow mem allocated for cache */
-	if (unlikely(n > RTE_MEMPOOL_CACHE_MAX_SIZE))
-		goto ring_enqueue;
-
-	cache = &mp->local_cache[lcore_id];
-	cache_objs = &cache->objs[cache->len];
-
-	/*
-	 * The cache follows the following algorithm
-	 *   1. Add the objects to the cache
-	 *   2. Anything greater than the cache min value (if it crosses the
-	 *   cache flush threshold) is flushed to the ring.
-	 */
-
-	/* Add elements back into the cache */
-	for (index = 0; index < n; ++index, obj_table++)
-		cache_objs[index] = *obj_table;
-
-	cache->len += n;
-
-	if (cache->len >= flushthresh) {
-		rte_ring_mp_enqueue_bulk(mp->ring, &cache->objs[cache_size],
-				cache->len - cache_size);
-		cache->len = cache_size;
-	}
-
-	return;
-
-ring_enqueue:
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
-
-	/* push remaining objects in ring */
-#ifdef RTE_LIBRTE_MEMPOOL_DEBUG
-	if (is_mp) {
-		if (rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n) < 0)
-			rte_panic("cannot put objects in mempool\n");
-	}
-	else {
-		if (rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n) < 0)
-			rte_panic("cannot put objects in mempool\n");
-	}
-#else
-	if (is_mp)
-		rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n);
-	else
-		rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n);
-#endif
-}
-
-
-/**
- * Put several objects back in the mempool (multi-producers safe).
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects).
- * @param n
- *   The number of objects to add in the mempool from the obj_table.
- */
-static inline void __attribute__((always_inline))
-rte_mempool_mp_put_bulk(struct rte_mempool *mp, void * const *obj_table,
-			unsigned n)
-{
-	__mempool_check_cookies(mp, obj_table, n, 0);
-	__mempool_put_bulk(mp, obj_table, n, 1);
-}
-
-/**
- * Put several objects back in the mempool (NOT multi-producers safe).
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects).
- * @param n
- *   The number of objects to add in the mempool from obj_table.
- */
-static inline void
-rte_mempool_sp_put_bulk(struct rte_mempool *mp, void * const *obj_table,
-			unsigned n)
-{
-	__mempool_check_cookies(mp, obj_table, n, 0);
-	__mempool_put_bulk(mp, obj_table, n, 0);
-}
-
-/**
- * Put several objects back in the mempool.
- *
- * This function calls the multi-producer or the single-producer
- * version depending on the default behavior that was specified at
- * mempool creation time (see flags).
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects).
- * @param n
- *   The number of objects to add in the mempool from obj_table.
- */
-static inline void __attribute__((always_inline))
-rte_mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
-		     unsigned n)
-{
-	__mempool_check_cookies(mp, obj_table, n, 0);
-	__mempool_put_bulk(mp, obj_table, n, !(mp->flags & MEMPOOL_F_SP_PUT));
-}
-
-/**
- * Put one object in the mempool (multi-producers safe).
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj
- *   A pointer to the object to be added.
- */
-static inline void __attribute__((always_inline))
-rte_mempool_mp_put(struct rte_mempool *mp, void *obj)
-{
-	rte_mempool_mp_put_bulk(mp, &obj, 1);
-}
-
-/**
- * Put one object back in the mempool (NOT multi-producers safe).
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj
- *   A pointer to the object to be added.
- */
-static inline void __attribute__((always_inline))
-rte_mempool_sp_put(struct rte_mempool *mp, void *obj)
-{
-	rte_mempool_sp_put_bulk(mp, &obj, 1);
-}
-
-/**
- * Put one object back in the mempool.
- *
- * This function calls the multi-producer or the single-producer
- * version depending on the default behavior that was specified at
- * mempool creation time (see flags).
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj
- *   A pointer to the object to be added.
- */
-static inline void __attribute__((always_inline))
-rte_mempool_put(struct rte_mempool *mp, void *obj)
-{
-	rte_mempool_put_bulk(mp, &obj, 1);
-}
-
-/**
- * @internal Get several objects from the mempool; used internally.
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects).
- * @param n
- *   The number of objects to get, must be strictly positive.
- * @param is_mc
- *   Mono-consumer (0) or multi-consumers (1).
- * @return
- *   - >=0: Success; number of objects supplied.
- *   - <0: Error; code of ring dequeue function.
- */
-static inline int __attribute__((always_inline))
-__mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
-		   unsigned n, int is_mc)
-{
-	int ret;
-#if RTE_MEMPOOL_CACHE_MAX_SIZE > 0
-	struct rte_mempool_cache *cache;
-	uint32_t index, len;
-	void **cache_objs;
-	unsigned lcore_id = rte_lcore_id();
-	uint32_t cache_size = mp->cache_size;
-
-	/* cache is not enabled or single consumer */
-	if (unlikely(cache_size == 0 || is_mc == 0 || n >= cache_size))
-		goto ring_dequeue;
-
-	cache = &mp->local_cache[lcore_id];
-	cache_objs = cache->objs;
-
-	/* Can this be satisfied from the cache? */
-	if (cache->len < n) {
-		/* No. Backfill the cache first, and then fill from it */
-		uint32_t req = n + (cache_size - cache->len);
-
-		/* How many do we require i.e. number to fill the cache + the request */
-		ret = rte_ring_mc_dequeue_bulk(mp->ring, &cache->objs[cache->len], req);
-		if (unlikely(ret < 0)) {
-			/*
-			 * In the offchance that we are buffer constrained,
-			 * where we are not able to allocate cache + n, go to
-			 * the ring directly. If that fails, we are truly out of
-			 * buffers.
-			 */
-			goto ring_dequeue;
-		}
-
-		cache->len += req;
-	}
-
-	/* Now fill in the response ... */
-	for (index = 0, len = cache->len - 1; index < n; ++index, len--, obj_table++)
-		*obj_table = cache_objs[len];
-
-	cache->len -= n;
-
-	__MEMPOOL_STAT_ADD(mp, get_success, n);
-
-	return 0;
-
-ring_dequeue:
-#endif /* RTE_MEMPOOL_CACHE_MAX_SIZE > 0 */
-
-	/* get remaining objects from ring */
-	if (is_mc)
-		ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n);
-	else
-		ret = rte_ring_sc_dequeue_bulk(mp->ring, obj_table, n);
-
-	if (ret < 0)
-		__MEMPOOL_STAT_ADD(mp, get_fail, n);
-	else
-		__MEMPOOL_STAT_ADD(mp, get_success, n);
-
-	return ret;
-}
-
-/**
- * Get several objects from the mempool (multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects) that will be filled.
- * @param n
- *   The number of objects to get from mempool to obj_table.
- * @return
- *   - 0: Success; objects taken.
- *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-static inline int __attribute__((always_inline))
-rte_mempool_mc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
-{
-	int ret;
-	ret = __mempool_get_bulk(mp, obj_table, n, 1);
-	if (ret == 0)
-		__mempool_check_cookies(mp, obj_table, n, 1);
-	return ret;
-}
-
-/**
- * Get several objects from the mempool (NOT multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects) that will be filled.
- * @param n
- *   The number of objects to get from the mempool to obj_table.
- * @return
- *   - 0: Success; objects taken.
- *   - -ENOENT: Not enough entries in the mempool; no object is
- *     retrieved.
- */
-static inline int __attribute__((always_inline))
-rte_mempool_sc_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
-{
-	int ret;
-	ret = __mempool_get_bulk(mp, obj_table, n, 0);
-	if (ret == 0)
-		__mempool_check_cookies(mp, obj_table, n, 1);
-	return ret;
-}
-
-/**
- * Get several objects from the mempool.
- *
- * This function calls the multi-consumers or the single-consumer
- * version, depending on the default behaviour that was specified at
- * mempool creation time (see flags).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_table
- *   A pointer to a table of void * pointers (objects) that will be filled.
- * @param n
- *   The number of objects to get from the mempool to obj_table.
- * @return
- *   - 0: Success; objects taken
- *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-static inline int __attribute__((always_inline))
-rte_mempool_get_bulk(struct rte_mempool *mp, void **obj_table, unsigned n)
-{
-	int ret;
-	ret = __mempool_get_bulk(mp, obj_table, n,
-				 !(mp->flags & MEMPOOL_F_SC_GET));
-	if (ret == 0)
-		__mempool_check_cookies(mp, obj_table, n, 1);
-	return ret;
-}
-
-/**
- * Get one object from the mempool (multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_p
- *   A pointer to a void * pointer (object) that will be filled.
- * @return
- *   - 0: Success; objects taken.
- *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-static inline int __attribute__((always_inline))
-rte_mempool_mc_get(struct rte_mempool *mp, void **obj_p)
-{
-	return rte_mempool_mc_get_bulk(mp, obj_p, 1);
-}
-
-/**
- * Get one object from the mempool (NOT multi-consumers safe).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_p
- *   A pointer to a void * pointer (object) that will be filled.
- * @return
- *   - 0: Success; objects taken.
- *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-static inline int __attribute__((always_inline))
-rte_mempool_sc_get(struct rte_mempool *mp, void **obj_p)
-{
-	return rte_mempool_sc_get_bulk(mp, obj_p, 1);
-}
-
-/**
- * Get one object from the mempool.
- *
- * This function calls the multi-consumers or the single-consumer
- * version, depending on the default behavior that was specified at
- * mempool creation (see flags).
- *
- * If cache is enabled, objects will be retrieved first from cache,
- * subsequently from the common pool. Note that it can return -ENOENT when
- * the local cache and common pool are empty, even if cache from other
- * lcores are full.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param obj_p
- *   A pointer to a void * pointer (object) that will be filled.
- * @return
- *   - 0: Success; objects taken.
- *   - -ENOENT: Not enough entries in the mempool; no object is retrieved.
- */
-static inline int __attribute__((always_inline))
-rte_mempool_get(struct rte_mempool *mp, void **obj_p)
-{
-	return rte_mempool_get_bulk(mp, obj_p, 1);
-}
-
-/**
- * Return the number of entries in the mempool.
- *
- * When cache is enabled, this function has to browse the length of
- * all lcores, so it should not be used in a data path, but only for
- * debug purposes.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @return
- *   The number of entries in the mempool.
- */
-unsigned rte_mempool_count(const struct rte_mempool *mp);
-
-/**
- * Return the number of free entries in the mempool ring.
- * i.e. how many entries can be freed back to the mempool.
- *
- * NOTE: This corresponds to the number of elements *allocated* from the
- * memory pool, not the number of elements in the pool itself. To count
- * the number elements currently available in the pool, use "rte_mempool_count"
- *
- * When cache is enabled, this function has to browse the length of
- * all lcores, so it should not be used in a data path, but only for
- * debug purposes.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @return
- *   The number of free entries in the mempool.
- */
-static inline unsigned
-rte_mempool_free_count(const struct rte_mempool *mp)
-{
-	return mp->size - rte_mempool_count(mp);
-}
-
-/**
- * Test if the mempool is full.
- *
- * When cache is enabled, this function has to browse the length of all
- * lcores, so it should not be used in a data path, but only for debug
- * purposes.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @return
- *   - 1: The mempool is full.
- *   - 0: The mempool is not full.
- */
-static inline int
-rte_mempool_full(const struct rte_mempool *mp)
-{
-	return !!(rte_mempool_count(mp) == mp->size);
-}
-
-/**
- * Test if the mempool is empty.
- *
- * When cache is enabled, this function has to browse the length of all
- * lcores, so it should not be used in a data path, but only for debug
- * purposes.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @return
- *   - 1: The mempool is empty.
- *   - 0: The mempool is not empty.
- */
-static inline int
-rte_mempool_empty(const struct rte_mempool *mp)
-{
-	return !!(rte_mempool_count(mp) == 0);
-}
-
-/**
- * Return the physical address of elt, which is an element of the pool mp.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @param elt
- *   A pointer (virtual address) to the element of the pool.
- * @return
- *   The physical address of the elt element.
- */
-static inline phys_addr_t
-rte_mempool_virt2phy(const struct rte_mempool *mp, const void *elt)
-{
-	if (rte_eal_has_hugepages()) {
-		uintptr_t off;
-
-		off = (const char *)elt - (const char *)mp->elt_va_start;
-		return (mp->elt_pa[off >> mp->pg_shift] + (off & mp->pg_mask));
-	} else {
-		/*
-		 * If huge pages are disabled, we cannot assume the
-		 * memory region to be physically contiguous.
-		 * Lookup for each element.
-		 */
-		return rte_mem_virt2phy(elt);
-	}
-}
-
-/**
- * Check the consistency of mempool objects.
- *
- * Verify the coherency of fields in the mempool structure. Also check
- * that the cookies of mempool objects (even the ones that are not
- * present in pool) have a correct value. If not, a panic will occur.
- *
- * @param mp
- *   A pointer to the mempool structure.
- */
-void rte_mempool_audit(const struct rte_mempool *mp);
-
-/**
- * Return a pointer to the private data in an mempool structure.
- *
- * @param mp
- *   A pointer to the mempool structure.
- * @return
- *   A pointer to the private data.
- */
-static inline void *rte_mempool_get_priv(struct rte_mempool *mp)
-{
-	return (char *)mp + MEMPOOL_HEADER_SIZE(mp, mp->pg_num);
-}
-
-/**
- * Dump the status of all mempools on the console
- *
- * @param f
- *   A pointer to a file for output
- */
-void rte_mempool_list_dump(FILE *f);
-
-/**
- * Search a mempool from its name
- *
- * @param name
- *   The name of the mempool.
- * @return
- *   The pointer to the mempool matching the name, or NULL if not found.
- *   NULL on error
- *   with rte_errno set appropriately. Possible rte_errno values include:
- *    - ENOENT - required entry not available to return.
- *
- */
-struct rte_mempool *rte_mempool_lookup(const char *name);
-
-/**
- * Given a desired size of the mempool element and mempool flags,
- * caluclates header, trailer, body and total sizes of the mempool object.
- * @param elt_size
- *   The size of each element.
- * @param flags
- *   The flags used for the mempool creation.
- *   Consult rte_mempool_create() for more information about possible values.
- *   The size of each element.
- * @return
- *   Total size of the mempool object.
- */
-uint32_t rte_mempool_calc_obj_size(uint32_t elt_size, uint32_t flags,
-	struct rte_mempool_objsz *sz);
-
-/**
- * Calculate maximum amount of memory required to store given number of objects.
- * Assumes that the memory buffer will be aligned at page boundary.
- * Note, that if object size is bigger then page size, then it assumes that
- * we have a subsets of physically continuous  pages big enough to store
- * at least one object.
- * @param elt_num
- *   Number of elements.
- * @param elt_sz
- *   The size of each element.
- * @param pg_shift
- *   LOG2 of the physical pages size.
- * @return
- *   Required memory size aligned at page boundary.
- */
-size_t rte_mempool_xmem_size(uint32_t elt_num, size_t elt_sz,
-	uint32_t pg_shift);
-
-/**
- * Calculate how much memory would be actually required with the given
- * memory footprint to store required number of objects.
- * @param vaddr
- *   Virtual address of the externally allocated memory buffer.
- *   Will be used to store mempool objects.
- * @param elt_num
- *   Number of elements.
- * @param elt_sz
- *   The size of each element.
- * @param paddr
- *   Array of phyiscall addresses of the pages that comprises given memory
- *   buffer.
- * @param pg_num
- *   Number of elements in the paddr array.
- * @param pg_shift
- *   LOG2 of the physical pages size.
- * @return
- *   Number of bytes needed to store given number of objects,
- *   aligned to the given page size.
- *   If provided memory buffer is not big enough:
- *   (-1) * actual number of elemnts that can be stored in that buffer.
- */
-ssize_t rte_mempool_xmem_usage(void *vaddr, uint32_t elt_num, size_t elt_sz,
-	const phys_addr_t paddr[], uint32_t pg_num, uint32_t pg_shift);
-
-/**
- * Walk list of all memory pools
- *
- * @param func
- *   Iterator function
- * @param arg
- *   Argument passed to iterator
- */
-void rte_mempool_walk(void (*func)(const struct rte_mempool *, void *arg),
-		      void *arg);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _RTE_MEMPOOL_H_ */
