@@ -139,6 +139,13 @@ struct rte_eth_ethertype_filter {
RTE_NTUPLE_FLAGS_DST_PORT | \
RTE_NTUPLE_FLAGS_PROTO)
+#define TCP_URG_FLAG 0x20
+#define TCP_ACK_FLAG 0x10
+#define TCP_PSH_FLAG 0x08
+#define TCP_RST_FLAG 0x04
+#define TCP_SYN_FLAG 0x02
+#define TCP_FIN_FLAG 0x01
+#define TCP_FLAG_ALL 0x3F
/**
* A structure used to define the ntuple filter entry
@@ -3072,122 +3072,6 @@ rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
}
int
-rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_2tuple_filter *filter, uint16_t rx_queue)
-{
- struct rte_eth_dev *dev;
-
- if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
- return -ENODEV;
- }
- if (filter->protocol != IPPROTO_TCP &&
- filter->tcp_flags != 0){
- PMD_DEBUG_TRACE("tcp flags is 0x%x, but the protocol value"
- " is not TCP\n",
- filter->tcp_flags);
- return -EINVAL;
- }
-
- dev = &rte_eth_devices[port_id];
- FUNC_PTR_OR_ERR_RET(*dev->dev_ops->add_2tuple_filter, -ENOTSUP);
- return (*dev->dev_ops->add_2tuple_filter)(dev, index, filter, rx_queue);
-}
-
-int
-rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index)
-{
- struct rte_eth_dev *dev;
-
- if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
- return -ENODEV;
- }
-
- dev = &rte_eth_devices[port_id];
- FUNC_PTR_OR_ERR_RET(*dev->dev_ops->remove_2tuple_filter, -ENOTSUP);
- return (*dev->dev_ops->remove_2tuple_filter)(dev, index);
-}
-
-int
-rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_2tuple_filter *filter, uint16_t *rx_queue)
-{
- struct rte_eth_dev *dev;
-
- if (filter == NULL || rx_queue == NULL)
- return -EINVAL;
-
- if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
- return -ENODEV;
- }
-
- dev = &rte_eth_devices[port_id];
- FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_2tuple_filter, -ENOTSUP);
- return (*dev->dev_ops->get_2tuple_filter)(dev, index, filter, rx_queue);
-}
-
-int
-rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_5tuple_filter *filter, uint16_t rx_queue)
-{
- struct rte_eth_dev *dev;
-
- if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
- return -ENODEV;
- }
-
- if (filter->protocol != IPPROTO_TCP &&
- filter->tcp_flags != 0){
- PMD_DEBUG_TRACE("tcp flags is 0x%x, but the protocol value"
- " is not TCP\n",
- filter->tcp_flags);
- return -EINVAL;
- }
-
- dev = &rte_eth_devices[port_id];
- FUNC_PTR_OR_ERR_RET(*dev->dev_ops->add_5tuple_filter, -ENOTSUP);
- return (*dev->dev_ops->add_5tuple_filter)(dev, index, filter, rx_queue);
-}
-
-int
-rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index)
-{
- struct rte_eth_dev *dev;
-
- if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
- return -ENODEV;
- }
-
- dev = &rte_eth_devices[port_id];
- FUNC_PTR_OR_ERR_RET(*dev->dev_ops->remove_5tuple_filter, -ENOTSUP);
- return (*dev->dev_ops->remove_5tuple_filter)(dev, index);
-}
-
-int
-rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_5tuple_filter *filter, uint16_t *rx_queue)
-{
- struct rte_eth_dev *dev;
-
- if (filter == NULL || rx_queue == NULL)
- return -EINVAL;
-
- if (port_id >= nb_ports) {
- PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
- return -ENODEV;
- }
-
- dev = &rte_eth_devices[port_id];
- FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_5tuple_filter, -ENOTSUP);
- return (*dev->dev_ops->get_5tuple_filter)(dev, index, filter,
- rx_queue);
-}
-
-int
rte_eth_dev_add_flex_filter(uint8_t port_id, uint16_t index,
struct rte_flex_filter *filter, uint16_t rx_queue)
{
@@ -963,16 +963,6 @@ struct rte_eth_dev_callback;
/** @internal Structure to keep track of registered callbacks */
TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
-
-#define TCP_URG_FLAG 0x20
-#define TCP_UGR_FLAG 0x20
-#define TCP_ACK_FLAG 0x10
-#define TCP_PSH_FLAG 0x08
-#define TCP_RST_FLAG 0x04
-#define TCP_SYN_FLAG 0x02
-#define TCP_FIN_FLAG 0x01
-#define TCP_FLAG_ALL 0x3F
-
/**
* A structure used to define an ethertype filter.
*/
@@ -991,18 +981,6 @@ struct rte_syn_filter {
};
/**
- * A structure used to define a 2tuple filter.
- */
-struct rte_2tuple_filter {
- uint16_t dst_port; /**< big endian. */
- uint8_t protocol;
- uint8_t tcp_flags;
- uint16_t priority; /**< used when more than one filter matches. */
- uint8_t dst_port_mask:1, /**< if mask is 1b, means not compare. */
- protocol_mask:1;
-};
-
-/**
* A structure used to define a flex filter.
*/
struct rte_flex_filter {
@@ -1013,25 +991,6 @@ struct rte_flex_filter {
uint8_t priority;
};
-/**
- * A structure used to define a 5tuple filter.
- */
-struct rte_5tuple_filter {
- uint32_t dst_ip; /**< destination IP address in big endian. */
- uint32_t src_ip; /**< source IP address in big endian. */
- uint16_t dst_port; /**< destination port in big endian. */
- uint16_t src_port; /**< source Port big endian. */
- uint8_t protocol; /**< l4 protocol. */
- uint8_t tcp_flags; /**< tcp flags. */
- uint16_t priority; /**< seven evels (001b-111b), 111b is highest,
- used when more than one filter matches. */
- uint8_t dst_ip_mask:1, /**< if mask is 1b, do not compare dst ip. */
- src_ip_mask:1, /**< if mask is 1b, do not compare src ip. */
- dst_port_mask:1, /**< if mask is 1b, do not compare dst port. */
- src_port_mask:1, /**< if mask is 1b, do not compare src port. */
- protocol_mask:1; /**< if mask is 1b, do not compare protocol. */
-};
-
/*
* Definitions of all functions exported by an Ethernet driver through the
* the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
@@ -1388,34 +1347,6 @@ typedef int (*eth_get_ethertype_filter_t)(struct rte_eth_dev *dev,
uint16_t *rx_queue);
/**< @internal Get an ethertype filter rule on an Ethernet device */
-typedef int (*eth_add_2tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_2tuple_filter *filter,
- uint16_t rx_queue);
-/**< @internal Setup a new 2tuple filter rule on an Ethernet device */
-
-typedef int (*eth_remove_2tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index);
-/**< @internal Remove a 2tuple filter rule on an Ethernet device */
-
-typedef int (*eth_get_2tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_2tuple_filter *filter,
- uint16_t *rx_queue);
-/**< @internal Get a 2tuple filter rule on an Ethernet device */
-
-typedef int (*eth_add_5tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_5tuple_filter *filter,
- uint16_t rx_queue);
-/**< @internal Setup a new 5tuple filter rule on an Ethernet device */
-
-typedef int (*eth_remove_5tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index);
-/**< @internal Remove a 5tuple filter rule on an Ethernet device */
-
-typedef int (*eth_get_5tuple_filter_t)(struct rte_eth_dev *dev,
- uint16_t index, struct rte_5tuple_filter *filter,
- uint16_t *rx_queue);
-/**< @internal Get a 5tuple filter rule on an Ethernet device */
-
typedef int (*eth_add_flex_filter_t)(struct rte_eth_dev *dev,
uint16_t index, struct rte_flex_filter *filter,
uint16_t rx_queue);
@@ -1537,12 +1468,6 @@ struct eth_dev_ops {
eth_add_ethertype_filter_t add_ethertype_filter; /**< add ethertype filter. */
eth_remove_ethertype_filter_t remove_ethertype_filter; /**< remove ethertype filter. */
eth_get_ethertype_filter_t get_ethertype_filter; /**< get ethertype filter. */
- eth_add_2tuple_filter_t add_2tuple_filter; /**< add 2tuple filter. */
- eth_remove_2tuple_filter_t remove_2tuple_filter; /**< remove 2tuple filter. */
- eth_get_2tuple_filter_t get_2tuple_filter; /**< get 2tuple filter. */
- eth_add_5tuple_filter_t add_5tuple_filter; /**< add 5tuple filter. */
- eth_remove_5tuple_filter_t remove_5tuple_filter; /**< remove 5tuple filter. */
- eth_get_5tuple_filter_t get_5tuple_filter; /**< get 5tuple filter. */
eth_add_flex_filter_t add_flex_filter; /**< add flex filter. */
eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter. */
eth_get_flex_filter_t get_flex_filter; /**< get flex filter. */
@@ -3538,126 +3463,6 @@ int rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
struct rte_ethertype_filter *filter, uint16_t *rx_queue);
/**
- * Add a new 2tuple filter rule on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 2tuple filter.
- * @param filter
- * The pointer to the structure describing the 2tuple filter rule.
- * The *rte_2tuple_filter* structure includes the values of the different
- * fields to match: protocol, dst_port and
- * tcp_flags if the protocol is tcp type.
- * @param rx_queue
- * The index of the RX queue where to store RX packets matching the added
- * 2tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_2tuple_filter *filter, uint16_t rx_queue);
-
-/**
- * remove a 2tuple filter rule on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 2tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index);
-
-/**
- * Get an 2tuple filter rule on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 2tuple filter.
- * @param filter
- * A pointer to a structure of type *rte_2tuple_filter* to be filled with
- * the information of the 2tuple filter.
- * @param rx_queue
- * A pointer to get the queue index.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- * - (-ENOENT) if no enabled filter in this index.
- */
-int rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_2tuple_filter *filter, uint16_t *rx_queue);
-
-/**
- * Add a new 5tuple filter rule on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 5tuple filter.
- * @param filter
- * The pointer to the structure describing the 5tuple filter rule.
- * The *rte_5tuple_filter* structure includes the values of the different
- * fields to match: dst src IP, dst src port, protocol and relative masks
- * @param rx_queue
- * The index of the RX queue where to store RX packets matching the added
- * 5tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_5tuple_filter *filter, uint16_t rx_queue);
-
-/**
- * remove a 5tuple filter rule on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 5tuple filter.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index);
-
-/**
- * Get an 5tuple filter rule on an Ethernet device.
- *
- * @param port_id
- * The port identifier of the Ethernet device.
- * @param index
- * The identifier of 5tuple filter.
- * @param filter
- * A pointer to a structure of type *rte_5tuple_filter* to be filled with
- * the information of the 5tuple filter.
- * @param rx_queue
- * A pointer to get the queue index.
- * @return
- * - (0) if successful.
- * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
- * - (-ENODEV) if *port_id* invalid.
- * - (-EINVAL) if the filter information is not correct.
- */
-int rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
- struct rte_5tuple_filter *filter, uint16_t *rx_queue);
-
-/**
* Add a new flex filter rule on an Ethernet device.
*
* @param port_id