[dpdk-dev,1/1] net/i40e: enable auto link update for XXV710
Checks
Commit Message
This patch remove the limitation that XXV710 device does
not support auto link update.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/i40e/i40e_ethdev.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
Comments
Hi Qi,
On 11/24/2016 11:43 PM, Qi Zhang wrote:
> This patch remove the limitation that XXV710 device does
XXV710 is 25G device, and support added in 16.11 (please correct me if
this is wrong.), but I can't find any DPDK documentation for this device.
Can you please add some documentation, at least to
http://dpdk.org/doc/nics and http://dpdk.org/doc/guides/nics/i40e.html
in a different patch?
> not support auto link update.
Can you please add more details that why we can remove the limitation now?
>
> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> ---
> drivers/net/i40e/i40e_ethdev.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 67778ba..b7a916d 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -1628,6 +1628,8 @@ i40e_phy_conf_link(struct i40e_hw *hw,
>
> /* use get_phy_abilities_resp value for the rest */
> phy_conf.phy_type = phy_ab.phy_type;
> + phy_conf.phy_type_ext = phy_ab.phy_type_ext;
> + phy_conf.fec_config = phy_ab.mod_type_ext;
And these changes look like called for all device types, just to double
check, are these 25G specific?
> phy_conf.eee_capability = phy_ab.eee_capability;
> phy_conf.eeer = phy_ab.eeer_val;
> phy_conf.low_power_ctrl = phy_ab.d3_lpan;
> @@ -1653,8 +1655,7 @@ i40e_apply_link_speed(struct rte_eth_dev *dev)
> struct rte_eth_conf *conf = &dev->data->dev_conf;
>
> speed = i40e_parse_link_speeds(conf->link_speeds);
> - if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
> - abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> + abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> if (!(conf->link_speeds & ETH_LINK_SPEED_FIXED))
> abilities |= I40E_AQ_PHY_AN_ENABLED;
> abilities |= I40E_AQ_PHY_LINK_ENABLED;
> @@ -1990,8 +1991,7 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
> uint8_t abilities = 0;
> struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>
> - if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
> - abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> + abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> return i40e_phy_conf_link(hw, abilities, speed);
> }
>
>
Hi Ferruh:
> -----Original Message-----
> From: Yigit, Ferruh
> Sent: Wednesday, November 30, 2016 1:46 AM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
> Zhang, Helin <helin.zhang@intel.com>
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/1] net/i40e: enable auto link update for
> XXV710
>
> Hi Qi,
>
> On 11/24/2016 11:43 PM, Qi Zhang wrote:
> > This patch remove the limitation that XXV710 device does
>
> XXV710 is 25G device, and support added in 16.11 (please correct me if this is
> wrong.), but I can't find any DPDK documentation for this device.
>
> Can you please add some documentation, at least to http://dpdk.org/doc/nics
> and http://dpdk.org/doc/guides/nics/i40e.html
> in a different patch?
For 16.11, since XXV710 is not officially supported, so they are missing in document.
For 17.02 this will be updated. Thanks for remind.
>
> > not support auto link update.
>
> Can you please add more details that why we can remove the limitation now?
Ok, will update in v2.
>
> >
> > Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> > ---
> > drivers/net/i40e/i40e_ethdev.c | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 67778ba..b7a916d 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -1628,6 +1628,8 @@ i40e_phy_conf_link(struct i40e_hw *hw,
> >
> > /* use get_phy_abilities_resp value for the rest */
> > phy_conf.phy_type = phy_ab.phy_type;
> > + phy_conf.phy_type_ext = phy_ab.phy_type_ext;
> > + phy_conf.fec_config = phy_ab.mod_type_ext;
>
> And these changes look like called for all device types, just to double check, are
> these 25G specific?
Actually only XXV710 need this two lines, but base on firmware engineer's input,
this could be implemented in generic way since no impact for other i40e devices.
>
> > phy_conf.eee_capability = phy_ab.eee_capability;
> > phy_conf.eeer = phy_ab.eeer_val;
> > phy_conf.low_power_ctrl = phy_ab.d3_lpan; @@ -1653,8 +1655,7 @@
> > i40e_apply_link_speed(struct rte_eth_dev *dev)
> > struct rte_eth_conf *conf = &dev->data->dev_conf;
> >
> > speed = i40e_parse_link_speeds(conf->link_speeds);
> > - if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
> > - abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> > + abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> > if (!(conf->link_speeds & ETH_LINK_SPEED_FIXED))
> > abilities |= I40E_AQ_PHY_AN_ENABLED;
> > abilities |= I40E_AQ_PHY_LINK_ENABLED; @@ -1990,8 +1991,7 @@
> > i40e_dev_set_link_down(struct rte_eth_dev *dev)
> > uint8_t abilities = 0;
> > struct i40e_hw *hw =
> I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> >
> > - if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
> > - abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> > + abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
> > return i40e_phy_conf_link(hw, abilities, speed); }
> >
> >
Thanks!
Qi
On 11/30/2016 2:26 AM, Zhang, Qi Z wrote:
> Hi Ferruh:
>
>> -----Original Message-----
>> From: Yigit, Ferruh
>> Sent: Wednesday, November 30, 2016 1:46 AM
>> To: Zhang, Qi Z <qi.z.zhang@intel.com>; Wu, Jingjing <jingjing.wu@intel.com>;
>> Zhang, Helin <helin.zhang@intel.com>
>> Cc: dev@dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH 1/1] net/i40e: enable auto link update for
>> XXV710
>>
>> Hi Qi,
>>
>> On 11/24/2016 11:43 PM, Qi Zhang wrote:
>>> This patch remove the limitation that XXV710 device does
>>
>> XXV710 is 25G device, and support added in 16.11 (please correct me if this is
>> wrong.), but I can't find any DPDK documentation for this device.
>>
>> Can you please add some documentation, at least to http://dpdk.org/doc/nics
>> and http://dpdk.org/doc/guides/nics/i40e.html
>> in a different patch?
>
> For 16.11, since XXV710 is not officially supported, so they are missing in document.
> For 17.02 this will be updated. Thanks for remind.
If officially will be added on 17.02, can you please update release
notes too, to announce new device support?
>>
>>> not support auto link update.
>>
>> Can you please add more details that why we can remove the limitation now?
> Ok, will update in v2.
>>
>>>
>>> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
>>> ---
>>> drivers/net/i40e/i40e_ethdev.c | 8 ++++----
>>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/net/i40e/i40e_ethdev.c
>>> b/drivers/net/i40e/i40e_ethdev.c index 67778ba..b7a916d 100644
>>> --- a/drivers/net/i40e/i40e_ethdev.c
>>> +++ b/drivers/net/i40e/i40e_ethdev.c
>>> @@ -1628,6 +1628,8 @@ i40e_phy_conf_link(struct i40e_hw *hw,
>>>
>>> /* use get_phy_abilities_resp value for the rest */
>>> phy_conf.phy_type = phy_ab.phy_type;
>>> + phy_conf.phy_type_ext = phy_ab.phy_type_ext;
>>> + phy_conf.fec_config = phy_ab.mod_type_ext;
>>
>> And these changes look like called for all device types, just to double check, are
>> these 25G specific?
>
> Actually only XXV710 need this two lines, but base on firmware engineer's input,
> this could be implemented in generic way since no impact for other i40e devices.
>>
>>> phy_conf.eee_capability = phy_ab.eee_capability;
>>> phy_conf.eeer = phy_ab.eeer_val;
>>> phy_conf.low_power_ctrl = phy_ab.d3_lpan; @@ -1653,8 +1655,7 @@
>>> i40e_apply_link_speed(struct rte_eth_dev *dev)
>>> struct rte_eth_conf *conf = &dev->data->dev_conf;
>>>
>>> speed = i40e_parse_link_speeds(conf->link_speeds);
>>> - if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
>>> - abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
>>> + abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
>>> if (!(conf->link_speeds & ETH_LINK_SPEED_FIXED))
>>> abilities |= I40E_AQ_PHY_AN_ENABLED;
>>> abilities |= I40E_AQ_PHY_LINK_ENABLED; @@ -1990,8 +1991,7 @@
>>> i40e_dev_set_link_down(struct rte_eth_dev *dev)
>>> uint8_t abilities = 0;
>>> struct i40e_hw *hw =
>> I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>>>
>>> - if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
>>> - abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
>>> + abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
>>> return i40e_phy_conf_link(hw, abilities, speed); }
>>>
>>>
> Thanks!
> Qi
>
@@ -1628,6 +1628,8 @@ i40e_phy_conf_link(struct i40e_hw *hw,
/* use get_phy_abilities_resp value for the rest */
phy_conf.phy_type = phy_ab.phy_type;
+ phy_conf.phy_type_ext = phy_ab.phy_type_ext;
+ phy_conf.fec_config = phy_ab.mod_type_ext;
phy_conf.eee_capability = phy_ab.eee_capability;
phy_conf.eeer = phy_ab.eeer_val;
phy_conf.low_power_ctrl = phy_ab.d3_lpan;
@@ -1653,8 +1655,7 @@ i40e_apply_link_speed(struct rte_eth_dev *dev)
struct rte_eth_conf *conf = &dev->data->dev_conf;
speed = i40e_parse_link_speeds(conf->link_speeds);
- if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
- abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
+ abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
if (!(conf->link_speeds & ETH_LINK_SPEED_FIXED))
abilities |= I40E_AQ_PHY_AN_ENABLED;
abilities |= I40E_AQ_PHY_LINK_ENABLED;
@@ -1990,8 +1991,7 @@ i40e_dev_set_link_down(struct rte_eth_dev *dev)
uint8_t abilities = 0;
struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- if (!I40E_PHY_TYPE_SUPPORT_25G(hw->phy.phy_types))
- abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
+ abilities = I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
return i40e_phy_conf_link(hw, abilities, speed);
}