[v1,1/1] build: optional NUMA and cpu counts detection

  Add an option to automatically discover the host's numa and cpu counts
and use those values for a non cross-build.
Give users the option to override the per-arch default values or values
from cross files by specifying them on the command line with -Dmax_lcores
and -Dmax_numa_nodes.

Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
---
 MAINTAINERS                  |  2 ++
 buildtools/get-cpu-count.py  |  7 ++++++
 buildtools/get-numa-count.py | 22 +++++++++++++++++
 buildtools/meson.build       |  2 ++
 config/meson.build           | 47 ++++++++++++++++++++++++++++++++++--
 config/x86/meson.build       |  2 ++
 meson_options.txt            |  8 +++---
 7 files changed, 84 insertions(+), 6 deletions(-)
 create mode 100644 buildtools/get-cpu-count.py
 create mode 100644 buildtools/get-numa-count.py
  

Hi Thomas and others,

Do you have any comments? I believe Bruce is okay with this patch.

Thanks,
Juraj

> -----Original Message-----
> From: Juraj Linkeš <juraj.linkes@pantheon.tech>
> Sent: Friday, November 20, 2020 1:55 PM
> To: thomas@monjalon.net; bruce.richardson@intel.com;
> Honnappa.Nagarahalli@arm.com
> Cc: dev@dpdk.org; Juraj Linkeš <juraj.linkes@pantheon.tech>
> Subject: [PATCH v1 1/1] build: optional NUMA and cpu counts detection
> 
> Add an option to automatically discover the host's numa and cpu counts and use
> those values for a non cross-build.
> Give users the option to override the per-arch default values or values from
> cross files by specifying them on the command line with -Dmax_lcores and -
> Dmax_numa_nodes.
> 
> Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> ---
>  MAINTAINERS                  |  2 ++
>  buildtools/get-cpu-count.py  |  7 ++++++  buildtools/get-numa-count.py | 22
> +++++++++++++++++
>  buildtools/meson.build       |  2 ++
>  config/meson.build           | 47 ++++++++++++++++++++++++++++++++++--
>  config/x86/meson.build       |  2 ++
>  meson_options.txt            |  8 +++---
>  7 files changed, 84 insertions(+), 6 deletions(-)  create mode 100644
> buildtools/get-cpu-count.py  create mode 100644 buildtools/get-numa-count.py
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a720cf672..366b0cf58 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -100,6 +100,8 @@ F: meson_options.txt
>  F: config/
>  F: buildtools/call-sphinx-build.py
>  F: buildtools/gen-pmdinfo-cfile.sh
> +F: buildtools/get-cpu-count.py
> +F: buildtools/get-numa-count.py
>  F: buildtools/list-dir-globs.py
>  F: buildtools/pkg-config/
>  F: buildtools/symlink-drivers-solibs.sh
> diff --git a/buildtools/get-cpu-count.py b/buildtools/get-cpu-count.py new file
> mode 100644 index 000000000..b269d557b
> --- /dev/null
> +++ b/buildtools/get-cpu-count.py
> @@ -0,0 +1,7 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright (c) 2020
> +PANTHEON.tech s.r.o.
> +
> +import os
> +
> +print(os.cpu_count())
> diff --git a/buildtools/get-numa-count.py b/buildtools/get-numa-count.py new
> file mode 100644 index 000000000..be73c5c3f
> --- /dev/null
> +++ b/buildtools/get-numa-count.py
> @@ -0,0 +1,22 @@
> +#!/usr/bin/env python3
> +# SPDX-License-Identifier: BSD-3-Clause # Copyright (c) 2020
> +PANTHEON.tech s.r.o.
> +
> +import ctypes
> +import glob
> +import os
> +import subprocess
> +
> +if os.name == 'posix':
> +    if os.path.isdir('/sys/devices/system/node'):
> +        print(len(glob.glob('/sys/devices/system/node/node*')))
> +    else:
> +        subprocess.run(['sysctl', '-n', 'vm.ndomains'])
> +
> +elif os.name == 'nt':
> +    libkernel32 = ctypes.windll.kernel32
> +
> +    count = ctypes.c_ulong()
> +
> +    libkernel32.GetNumaHighestNodeNumber(ctypes.pointer(count))
> +    print(count.value + 1)
> diff --git a/buildtools/meson.build b/buildtools/meson.build index
> 04808dabc..4ab67de27 100644
> --- a/buildtools/meson.build
> +++ b/buildtools/meson.build
> @@ -17,3 +17,5 @@ else
>  endif
>  map_to_win_cmd = py3 + files('map_to_win.py')  sphinx_wrapper = py3 +
> files('call-sphinx-build.py')
> +get_cpu_count_cmd = py3 + files('get-cpu-count.py') get_numa_count_cmd
> += py3 + files('get-numa-count.py')
> diff --git a/config/meson.build b/config/meson.build index
> a29693b88..63d8c2747 100644
> --- a/config/meson.build
> +++ b/config/meson.build
> @@ -232,8 +232,6 @@ foreach arg: warning_flags  endforeach
> 
>  # set other values pulled from the build options -
> dpdk_conf.set('RTE_MAX_LCORE', get_option('max_lcores')) -
> dpdk_conf.set('RTE_MAX_NUMA_NODES', get_option('max_numa_nodes'))
> dpdk_conf.set('RTE_MAX_ETHPORTS', get_option('max_ethports'))
> dpdk_conf.set('RTE_LIBEAL_USE_HPET', get_option('use_hpet'))
> dpdk_conf.set('RTE_ENABLE_TRACE_FP', get_option('enable_trace_fp')) @@ -
> 252,6 +250,51 @@ compile_time_cpuflags = []
>  subdir(arch_subdir)
>  dpdk_conf.set('RTE_COMPILE_TIME_CPUFLAGS',
> ','.join(compile_time_cpuflags))
> 
> +max_lcores = get_option('max_lcores')
> +if max_lcores > 0
> +	# Overwrite the default value from arch_subdir with user input
> +	dpdk_conf.set('RTE_MAX_LCORE', max_lcores) elif max_lcores == -1
> +	# Overwrite the default value with discovered values
> +	if meson.is_cross_build()
> +		error('Discovery of max_lcores is not supported for cross-
> compilation.')
> +	endif
> +	# Discovery makes sense only for non-cross builds
> +	max_lcores = run_command(get_cpu_count_cmd).stdout().to_int()
> +	min_lcores = 2
> +	# DPDK must be build for at least 2 cores
> +	if max_lcores < min_lcores
> +		message('Found less than @0@ cores, building for @0@
> cores'.format(min_lcores))
> +		max_lcores = min_lcores
> +	else
> +		message('Found @0@ cores'.format(max_lcores))
> +	endif
> +	dpdk_conf.set('RTE_MAX_LCORE', max_lcores) endif
> +
> +max_numa_nodes = get_option('max_numa_nodes') if max_numa_nodes > 0
> +	# Overwrite the default value from arch_subdir with user input
> +	dpdk_conf.set('RTE_MAX_NUMA_NODES', max_numa_nodes) elif
> +max_numa_nodes == -1
> +	# Overwrite the default value with discovered values
> +	if meson.is_cross_build()
> +		error('Discovery of max_numa_nodes not supported for cross-
> compilation.')
> +	endif
> +	# Discovery makes sense only for non-cross builds
> +	max_numa_nodes =
> run_command(get_numa_count_cmd).stdout().to_int()
> +	message('Found @0@ numa nodes'.format(max_numa_nodes))
> +	dpdk_conf.set('RTE_MAX_NUMA_NODES', max_numa_nodes) endif
> +
> +# check that cpu and numa count is set and error out if it's not set if
> +not dpdk_conf.has('RTE_MAX_LCORE')
> +	error('Number of cores not specified.') endif if not
> +dpdk_conf.has('RTE_MAX_NUMA_NODES')
> +	error('Number of numa nodes not specified.') endif
> +
>  # set the install path for the drivers
>  dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
> 
> diff --git a/config/x86/meson.build b/config/x86/meson.build index
> 31bfa63b1..4989d47f3 100644
> --- a/config/x86/meson.build
> +++ b/config/x86/meson.build
> @@ -57,3 +57,5 @@ else
>  endif
> 
>  dpdk_conf.set('RTE_CACHE_LINE_SIZE', 64)
> +dpdk_conf.set('RTE_MAX_LCORE', 128)
> +dpdk_conf.set('RTE_MAX_NUMA_NODES', 4)
> diff --git a/meson_options.txt b/meson_options.txt index
> e384e6dbb..8e08852cf 100644
> --- a/meson_options.txt
> +++ b/meson_options.txt
> @@ -24,10 +24,10 @@ option('machine', type: 'string', value: 'native',
>  	description: 'set the target machine type')  option('max_ethports', type:
> 'integer', value: 32,
>  	description: 'maximum number of Ethernet devices') -
> option('max_lcores', type: 'integer', value: 128,
> -	description: 'maximum number of cores/threads supported by EAL')
> -option('max_numa_nodes', type: 'integer', value: 4,
> -	description: 'maximum number of NUMA nodes supported by EAL')
> +option('max_lcores', type: 'integer', value: 0,
> +	description: 'A positive integer sets the maximum number of
> +cores/threads supported by EAL. The default is per-arch (or cross-compilation)
> default. Set to -1 to detect the number of cores on the build machine.')
> option('max_numa_nodes', type: 'integer', value: 0,
> +	description: 'A positive integer sets maximum number of NUMA nodes
> +supported by EAL. The default is per-arch (or cross-compilation)
> +default. Set to -1 to detect the number of numa nodes on the build
> +machine.')
>  option('enable_trace_fp', type: 'boolean', value: false,
>  	description: 'enable fast path trace points.')  option('tests', type:
> 'boolean', value: true,
> --
> 2.20.1