[v2] doc: fix testpmd sample qinq flow rules
Checks
Commit Message
In the Testpmd Flow rules management section, correct
the TPID values in the Sample QinQ flow rules sub section.
Also replace the keyword qinq_strip with extend in the
vlan set command.
Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
Comments
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
> -----Original Message-----
> From: Iremonger, Bernard <bernard.iremonger@intel.com>
> Sent: Tuesday, January 19, 2021 21:01
> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>
> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules
>
> In the Testpmd Flow rules management section, correct the TPID values in the
> Sample QinQ flow rules sub section.
> Also replace the keyword qinq_strip with extend in the vlan set command.
>
> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
> Cc: stable@dpdk.org
>
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> ---
> doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 9be4500..6a00245 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -4426,14 +4426,14 @@ Sample QinQ flow rules Before creating QinQ
> rule(s) the following commands should be issued to enable QinQ::
>
> testpmd> port stop 0
> - testpmd> vlan set qinq_strip on 0
> + testpmd> vlan set extend on 0
>
> The above command sets the inner and outer TPID's to 0x8100.
>
> To change the TPID's the following commands should be used::
>
> - testpmd> vlan set outer tpid 0xa100 0
> - testpmd> vlan set inner tpid 0x9100 0
> + testpmd> vlan set outer tpid 0x88A8 0
> + testpmd> vlan set inner tpid 0x8100 0
> testpmd> port start 0
>
> Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
> --
> 2.7.4
On 1/20/2021 1:42 AM, Li, Xiaoyun wrote:
>> -----Original Message-----
>> From: Iremonger, Bernard <bernard.iremonger@intel.com>
>> Sent: Tuesday, January 19, 2021 21:01
>> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>
>> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org
>> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules
>>
>> In the Testpmd Flow rules management section, correct the TPID values in the
>> Sample QinQ flow rules sub section.
>> Also replace the keyword qinq_strip with extend in the vlan set command.
>>
>> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
>
> Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
>
Applied to dpdk-next-net/main, thanks.
@@ -4426,14 +4426,14 @@ Sample QinQ flow rules
Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
testpmd> port stop 0
- testpmd> vlan set qinq_strip on 0
+ testpmd> vlan set extend on 0
The above command sets the inner and outer TPID's to 0x8100.
To change the TPID's the following commands should be used::
- testpmd> vlan set outer tpid 0xa100 0
- testpmd> vlan set inner tpid 0x9100 0
+ testpmd> vlan set outer tpid 0x88A8 0
+ testpmd> vlan set inner tpid 0x8100 0
testpmd> port start 0
Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.