diff mbox series

[v6,7/9] ethdev: new API to get representor info

Message ID 1613272907-22563-8-git-send-email-xuemingl@nvidia.com (mailing list archive)
State New
Delegated to: Ferruh Yigit
Headers show
Series ethdev: support SubFunction representor | expand

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Xueming(Steven) Li Feb. 14, 2021, 3:21 a.m. UTC
The NIC can have multiple PCIe links and can be attached to multiple
hosts, for example the same single NIC can be shared for multiple server
units in the rack. On each PCIe link NIC can provide multiple PFs and
VFs/SFs based on these ones. The full representor identifier consists of
three indices - controller index, PF index, and VF or SF index (if any).

This patch introduces a new API rte_eth_representor_info_get() to
retrieve representor corresponding info mapping:
 - caller controller index and pf index.
 - supported representor ID ranges.
 - type, controller, pf and start vf/sf ID of each range.
The API is useful to convert representor from devargs to representor ID.

New ethdev callback representor_info_get() is added to retrieve info
from PMD driver, optional for PMD that doesn't support new devargs
representor syntax.

Signed-off-by: Xueming Li <xuemingl@nvidia.com>
---
 lib/librte_ethdev/ethdev_driver.h |  6 +++++
 lib/librte_ethdev/rte_ethdev.c    | 14 ++++++++++
 lib/librte_ethdev/rte_ethdev.h    | 43 +++++++++++++++++++++++++++++++
 lib/librte_ethdev/version.map     |  3 +++
 4 files changed, 66 insertions(+)

Comments

Andrew Rybchenko Feb. 15, 2021, 8:50 a.m. UTC | #1
On 2/14/21 6:21 AM, Xueming Li wrote:
> The NIC can have multiple PCIe links and can be attached to multiple
> hosts, for example the same single NIC can be shared for multiple server
> units in the rack. On each PCIe link NIC can provide multiple PFs and
> VFs/SFs based on these ones. The full representor identifier consists of
> three indices - controller index, PF index, and VF or SF index (if any).
> 
> This patch introduces a new API rte_eth_representor_info_get() to
> retrieve representor corresponding info mapping:
>  - caller controller index and pf index.
>  - supported representor ID ranges.
>  - type, controller, pf and start vf/sf ID of each range.
> The API is useful to convert representor from devargs to representor ID.
> 
> New ethdev callback representor_info_get() is added to retrieve info
> from PMD driver, optional for PMD that doesn't support new devargs
> representor syntax.
> 
> Signed-off-by: Xueming Li <xuemingl@nvidia.com>

LGTM, except minor notes below.

> ---
>  lib/librte_ethdev/ethdev_driver.h |  6 +++++
>  lib/librte_ethdev/rte_ethdev.c    | 14 ++++++++++
>  lib/librte_ethdev/rte_ethdev.h    | 43 +++++++++++++++++++++++++++++++
>  lib/librte_ethdev/version.map     |  3 +++
>  4 files changed, 66 insertions(+)
> 
> diff --git a/lib/librte_ethdev/ethdev_driver.h b/lib/librte_ethdev/ethdev_driver.h
> index 06ff35266f..abcbc3112d 100644
> --- a/lib/librte_ethdev/ethdev_driver.h
> +++ b/lib/librte_ethdev/ethdev_driver.h
> @@ -289,6 +289,10 @@ typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev,
>  				     char *fw_version, size_t fw_size);
>  /**< @internal Get firmware information of an Ethernet device. */
>  
> +typedef int (*eth_representor_info_get_t)(struct rte_eth_dev *dev,
> +	struct rte_eth_representor_info *info);
> +/**< @internal Get representor type and ID range. */
> +
>  typedef int (*eth_tx_done_cleanup_t)(void *txq, uint32_t free_cnt);
>  /**< @internal Force mbufs to be from TX ring. */
>  
> @@ -823,6 +827,8 @@ struct eth_dev_ops {
>  	eth_burst_mode_get_t       rx_burst_mode_get; /**< Get RX burst mode */
>  	eth_burst_mode_get_t       tx_burst_mode_get; /**< Get TX burst mode */
>  	eth_fw_version_get_t       fw_version_get; /**< Get firmware version. */
> +	eth_representor_info_get_t representor_info_get;
> +	/**< Get representor info. */

Why is it added in the middle of the ops structure?

>  	eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
>  	/**< Get packet types supported and identified by device. */
>  	eth_dev_ptypes_set_t dev_ptypes_set;
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index fe9466a03e..07c6debb58 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -3265,6 +3265,20 @@ rte_eth_dev_fw_version_get(uint16_t port_id, char *fw_version, size_t fw_size)
>  							fw_version, fw_size));
>  }
>  
> +int
> +rte_eth_representor_info_get(uint16_t port_id,
> +			     struct rte_eth_representor_info *info)
> +{
> +	struct rte_eth_dev *dev;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	dev = &rte_eth_devices[port_id];
> +
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fw_version_get, -ENOTSUP);

I guess you mean to check representor_info_get here.

> +	return eth_err(port_id, (*dev->dev_ops->representor_info_get)(dev,
> +								      info));
> +}
> +
>  int
>  rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
>  {
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index 9cd519bf59..35eb0a5721 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -1581,6 +1581,30 @@ struct rte_eth_dev_info {
>  	void *reserved_ptrs[2];   /**< Reserved for future fields */
>  };
>  
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this structure may change without prior notice.
> + *
> + * Ethernet device representor information
> + */
> +struct rte_eth_representor_info {
> +	uint16_t controller; /**< Controller ID of caller device. */
> +	uint16_t pf; /**< Physical function ID of caller device. */
> +	struct {
> +		enum rte_eth_representor_type type; /**< Representor type */
> +		int controller; /**< Controller ID, -1 to ignore */
> +		int pf; /**< Physical function ID, -1 to ignore */
> +		__extension__
> +		union {
> +			int vf; /**< VF start index */
> +			int sf; /**< SF start index */
> +		};
> +		uint16_t id_base; /**< Representor ID start index */
> +		uint16_t id_end;  /**< Representor ID end index */
> +		char name[RTE_DEV_NAME_MAX_LEN];	/**< Representor name */
> +	} ranges[]; /**< Representor ID range by type */

I'm pretty sure that you need separate type for the structure
when you add support, since you need to allocate memory and
calculate required size.

> +};
> +
>  /**
>   * Ethernet device RX queue information structure.
>   * Used to retrieve information about configured queue.
> @@ -3038,6 +3062,25 @@ int rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr);
>   */
>  int rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info);
>  
> +/**
> + * Retrieve the representor info of the device.
> + *
> + * @param port_id
> + *   The port identifier of the device.
> + * @param info
> + *   A pointer to a representor info structure.
> + *   NULL to return number of range entries and allocate memory
> + *   for next call to store detail.
> + * @return
> + *   - (-ENOTSUP) if operation is not supported.
> + *   - (-ENODEV) if *port_id* invalid.
> + *   - (-EIO) if device is removed.
> + *   - (>=0) number of representor range entries supported by device.
> + */
> +__rte_experimental
> +int rte_eth_representor_info_get(uint16_t port_id,
> +				 struct rte_eth_representor_info *info);
> +
>  /**
>   * Retrieve the firmware version of a device.
>   *
Xueming(Steven) Li Feb. 16, 2021, 3:11 p.m. UTC | #2
>-----Original Message-----
>From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
>Sent: Monday, February 15, 2021 4:50 PM
>To: Xueming(Steven) Li <xuemingl@nvidia.com>
>Cc: dev@dpdk.org; Slava Ovsiienko <viacheslavo@nvidia.com>; Asaf Penso <asafp@nvidia.com>; NBU-Contact-Thomas Monjalon
><thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>; Ray Kinsella <mdr@ashroe.eu>; Neil Horman
><nhorman@tuxdriver.com>
>Subject: Re: [PATCH v6 7/9] ethdev: new API to get representor info
>
>On 2/14/21 6:21 AM, Xueming Li wrote:
>> The NIC can have multiple PCIe links and can be attached to multiple
>> hosts, for example the same single NIC can be shared for multiple
>> server units in the rack. On each PCIe link NIC can provide multiple
>> PFs and VFs/SFs based on these ones. The full representor identifier
>> consists of three indices - controller index, PF index, and VF or SF index (if any).
>>
>> This patch introduces a new API rte_eth_representor_info_get() to
>> retrieve representor corresponding info mapping:
>>  - caller controller index and pf index.
>>  - supported representor ID ranges.
>>  - type, controller, pf and start vf/sf ID of each range.
>> The API is useful to convert representor from devargs to representor ID.
>>
>> New ethdev callback representor_info_get() is added to retrieve info
>> from PMD driver, optional for PMD that doesn't support new devargs
>> representor syntax.
>>
>> Signed-off-by: Xueming Li <xuemingl@nvidia.com>
>
>LGTM, except minor notes below.
>
>> ---
>>  lib/librte_ethdev/ethdev_driver.h |  6 +++++
>>  lib/librte_ethdev/rte_ethdev.c    | 14 ++++++++++
>>  lib/librte_ethdev/rte_ethdev.h    | 43 +++++++++++++++++++++++++++++++
>>  lib/librte_ethdev/version.map     |  3 +++
>>  4 files changed, 66 insertions(+)
>>
>> diff --git a/lib/librte_ethdev/ethdev_driver.h
>> b/lib/librte_ethdev/ethdev_driver.h
>> index 06ff35266f..abcbc3112d 100644
>> --- a/lib/librte_ethdev/ethdev_driver.h
>> +++ b/lib/librte_ethdev/ethdev_driver.h
>> @@ -289,6 +289,10 @@ typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev,
>>  				     char *fw_version, size_t fw_size);  /**< @internal Get
>> firmware information of an Ethernet device. */
>>
>> +typedef int (*eth_representor_info_get_t)(struct rte_eth_dev *dev,
>> +	struct rte_eth_representor_info *info); /**< @internal Get
>> +representor type and ID range. */
>> +
>>  typedef int (*eth_tx_done_cleanup_t)(void *txq, uint32_t free_cnt);
>> /**< @internal Force mbufs to be from TX ring. */
>>
>> @@ -823,6 +827,8 @@ struct eth_dev_ops {
>>  	eth_burst_mode_get_t       rx_burst_mode_get; /**< Get RX burst mode */
>>  	eth_burst_mode_get_t       tx_burst_mode_get; /**< Get TX burst mode */
>>  	eth_fw_version_get_t       fw_version_get; /**< Get firmware version. */
>> +	eth_representor_info_get_t representor_info_get;
>> +	/**< Get representor info. */
>
>Why is it added in the middle of the ops structure?

Looks like here group of function that getting information. Will move to end.

>
>>  	eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
>>  	/**< Get packet types supported and identified by device. */
>>  	eth_dev_ptypes_set_t dev_ptypes_set; diff --git
>> a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
>> index fe9466a03e..07c6debb58 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -3265,6 +3265,20 @@ rte_eth_dev_fw_version_get(uint16_t port_id, char *fw_version, size_t fw_size)
>>  							fw_version, fw_size));
>>  }
>>
>> +int
>> +rte_eth_representor_info_get(uint16_t port_id,
>> +			     struct rte_eth_representor_info *info) {
>> +	struct rte_eth_dev *dev;
>> +
>> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> +	dev = &rte_eth_devices[port_id];
>> +
>> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fw_version_get, -ENOTSUP);
>
>I guess you mean to check representor_info_get here.

Thanks, my bad.

>
>> +	return eth_err(port_id, (*dev->dev_ops->representor_info_get)(dev,
>> +								      info));
>> +}
>> +
>>  int
>>  rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info
>> *dev_info)  { diff --git a/lib/librte_ethdev/rte_ethdev.h
>> b/lib/librte_ethdev/rte_ethdev.h index 9cd519bf59..35eb0a5721 100644
>> --- a/lib/librte_ethdev/rte_ethdev.h
>> +++ b/lib/librte_ethdev/rte_ethdev.h
>> @@ -1581,6 +1581,30 @@ struct rte_eth_dev_info {
>>  	void *reserved_ptrs[2];   /**< Reserved for future fields */
>>  };
>>
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this structure may change without prior notice.
>> + *
>> + * Ethernet device representor information  */ struct
>> +rte_eth_representor_info {
>> +	uint16_t controller; /**< Controller ID of caller device. */
>> +	uint16_t pf; /**< Physical function ID of caller device. */
>> +	struct {
>> +		enum rte_eth_representor_type type; /**< Representor type */
>> +		int controller; /**< Controller ID, -1 to ignore */
>> +		int pf; /**< Physical function ID, -1 to ignore */
>> +		__extension__
>> +		union {
>> +			int vf; /**< VF start index */
>> +			int sf; /**< SF start index */
>> +		};
>> +		uint16_t id_base; /**< Representor ID start index */
>> +		uint16_t id_end;  /**< Representor ID end index */
>> +		char name[RTE_DEV_NAME_MAX_LEN];	/**< Representor name */
>> +	} ranges[]; /**< Representor ID range by type */
>
>I'm pretty sure that you need separate type for the structure when you add support, since you need to allocate memory and calculate
>required size.

Sizeof(info.ranges[0]) works, but splitting looks a good idea :)

>
>> +};
>> +
>>  /**
>>   * Ethernet device RX queue information structure.
>>   * Used to retrieve information about configured queue.
>> @@ -3038,6 +3062,25 @@ int rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr);
>>   */
>>  int rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info
>> *dev_info);
>>
>> +/**
>> + * Retrieve the representor info of the device.
>> + *
>> + * @param port_id
>> + *   The port identifier of the device.
>> + * @param info
>> + *   A pointer to a representor info structure.
>> + *   NULL to return number of range entries and allocate memory
>> + *   for next call to store detail.
>> + * @return
>> + *   - (-ENOTSUP) if operation is not supported.
>> + *   - (-ENODEV) if *port_id* invalid.
>> + *   - (-EIO) if device is removed.
>> + *   - (>=0) number of representor range entries supported by device.
>> + */
>> +__rte_experimental
>> +int rte_eth_representor_info_get(uint16_t port_id,
>> +				 struct rte_eth_representor_info *info);
>> +
>>  /**
>>   * Retrieve the firmware version of a device.
>>   *
diff mbox series

Patch

diff --git a/lib/librte_ethdev/ethdev_driver.h b/lib/librte_ethdev/ethdev_driver.h
index 06ff35266f..abcbc3112d 100644
--- a/lib/librte_ethdev/ethdev_driver.h
+++ b/lib/librte_ethdev/ethdev_driver.h
@@ -289,6 +289,10 @@  typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev,
 				     char *fw_version, size_t fw_size);
 /**< @internal Get firmware information of an Ethernet device. */
 
+typedef int (*eth_representor_info_get_t)(struct rte_eth_dev *dev,
+	struct rte_eth_representor_info *info);
+/**< @internal Get representor type and ID range. */
+
 typedef int (*eth_tx_done_cleanup_t)(void *txq, uint32_t free_cnt);
 /**< @internal Force mbufs to be from TX ring. */
 
@@ -823,6 +827,8 @@  struct eth_dev_ops {
 	eth_burst_mode_get_t       rx_burst_mode_get; /**< Get RX burst mode */
 	eth_burst_mode_get_t       tx_burst_mode_get; /**< Get TX burst mode */
 	eth_fw_version_get_t       fw_version_get; /**< Get firmware version. */
+	eth_representor_info_get_t representor_info_get;
+	/**< Get representor info. */
 	eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
 	/**< Get packet types supported and identified by device. */
 	eth_dev_ptypes_set_t dev_ptypes_set;
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index fe9466a03e..07c6debb58 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -3265,6 +3265,20 @@  rte_eth_dev_fw_version_get(uint16_t port_id, char *fw_version, size_t fw_size)
 							fw_version, fw_size));
 }
 
+int
+rte_eth_representor_info_get(uint16_t port_id,
+			     struct rte_eth_representor_info *info)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->fw_version_get, -ENOTSUP);
+	return eth_err(port_id, (*dev->dev_ops->representor_info_get)(dev,
+								      info));
+}
+
 int
 rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info)
 {
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index 9cd519bf59..35eb0a5721 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1581,6 +1581,30 @@  struct rte_eth_dev_info {
 	void *reserved_ptrs[2];   /**< Reserved for future fields */
 };
 
+/**
+ * @warning
+ * @b EXPERIMENTAL: this structure may change without prior notice.
+ *
+ * Ethernet device representor information
+ */
+struct rte_eth_representor_info {
+	uint16_t controller; /**< Controller ID of caller device. */
+	uint16_t pf; /**< Physical function ID of caller device. */
+	struct {
+		enum rte_eth_representor_type type; /**< Representor type */
+		int controller; /**< Controller ID, -1 to ignore */
+		int pf; /**< Physical function ID, -1 to ignore */
+		__extension__
+		union {
+			int vf; /**< VF start index */
+			int sf; /**< SF start index */
+		};
+		uint16_t id_base; /**< Representor ID start index */
+		uint16_t id_end;  /**< Representor ID end index */
+		char name[RTE_DEV_NAME_MAX_LEN];	/**< Representor name */
+	} ranges[]; /**< Representor ID range by type */
+};
+
 /**
  * Ethernet device RX queue information structure.
  * Used to retrieve information about configured queue.
@@ -3038,6 +3062,25 @@  int rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr);
  */
 int rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info);
 
+/**
+ * Retrieve the representor info of the device.
+ *
+ * @param port_id
+ *   The port identifier of the device.
+ * @param info
+ *   A pointer to a representor info structure.
+ *   NULL to return number of range entries and allocate memory
+ *   for next call to store detail.
+ * @return
+ *   - (-ENOTSUP) if operation is not supported.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EIO) if device is removed.
+ *   - (>=0) number of representor range entries supported by device.
+ */
+__rte_experimental
+int rte_eth_representor_info_get(uint16_t port_id,
+				 struct rte_eth_representor_info *info);
+
 /**
  * Retrieve the firmware version of a device.
  *
diff --git a/lib/librte_ethdev/version.map b/lib/librte_ethdev/version.map
index a124e1e370..bb6f7436c2 100644
--- a/lib/librte_ethdev/version.map
+++ b/lib/librte_ethdev/version.map
@@ -243,6 +243,9 @@  EXPERIMENTAL {
 
 	# added in 21.02
 	rte_eth_get_monitor_addr;
+
+	# added in 21.05
+	rte_eth_representor_info_get;
 };
 
 INTERNAL {