@@ -500,6 +500,7 @@ DMA device API - EXPERIMENTAL
M: Chengwen Feng <fengchengwen@huawei.com>
F: lib/dmadev/
F: drivers/dma/skeleton/
+F: app/test/test_dmadev*
F: doc/guides/prog_guide/dmadev.rst
@@ -43,6 +43,8 @@ test_sources = files(
'test_debug.c',
'test_distributor.c',
'test_distributor_perf.c',
+ 'test_dmadev.c',
+ 'test_dmadev_api.c',
'test_eal_flags.c',
'test_eal_fs.c',
'test_efd.c',
@@ -162,6 +164,7 @@ test_deps = [
'cmdline',
'cryptodev',
'distributor',
+ 'dmadev',
'efd',
'ethdev',
'eventdev',
@@ -333,6 +336,7 @@ driver_test_names = [
'cryptodev_sw_mvsam_autotest',
'cryptodev_sw_snow3g_autotest',
'cryptodev_sw_zuc_autotest',
+ 'dmadev_autotest',
'eventdev_selftest_octeontx',
'eventdev_selftest_sw',
'rawdev_autotest',
new file mode 100644
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ * Copyright(c) 2021 Intel Corporation.
+ */
+
+#include <rte_common.h>
+#include <rte_dev.h>
+#include <rte_dmadev.h>
+#include <rte_bus_vdev.h>
+
+#include "test.h"
+
+/* from test_dmadev_api.c */
+extern int test_dmadev_api(uint16_t dev_id);
+
+static int
+test_apis(void)
+{
+ const char *pmd = "dma_skeleton";
+ int id;
+ int ret;
+
+ if (rte_vdev_init(pmd, NULL) < 0)
+ return TEST_SKIPPED;
+ id = rte_dmadev_get_dev_id(pmd);
+ if (id < 0)
+ return TEST_SKIPPED;
+ printf("\n### Test dmadev infrastructure using skeleton driver\n");
+ ret = test_dmadev_api(id);
+ rte_vdev_uninit(pmd);
+
+ return ret;
+}
+
+static int
+test_dmadev(void)
+{
+ /* basic sanity on dmadev infrastructure */
+ if (test_apis() < 0)
+ return -1;
+
+ return 0;
+}
+
+REGISTER_TEST_COMMAND(dmadev_autotest, test_dmadev);
new file mode 100644
@@ -0,0 +1,532 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2021 HiSilicon Limited.
+ */
+
+#include <stdint.h>
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_cycles.h>
+#include <rte_malloc.h>
+#include <rte_test.h>
+#include <rte_dmadev.h>
+
+extern int test_dmadev_api(uint16_t dev_id);
+
+#define SKELDMA_TEST_RUN(test) \
+ testsuite_run_test(test, #test)
+
+#define TEST_MEMCPY_SIZE 1024
+#define TEST_WAIT_US_VAL 50000
+
+#define TEST_SUCCESS 0
+#define TEST_FAILED -1
+
+static uint16_t test_dev_id;
+static uint16_t invalid_dev_id;
+
+static int total;
+static int passed;
+static int failed;
+static char *src;
+static char *dst;
+
+static int
+testsuite_setup(uint16_t dev_id)
+{
+ test_dev_id = dev_id;
+ invalid_dev_id = RTE_DMADEV_MAX_DEVS;
+
+ src = rte_malloc("dmadev_test_src", TEST_MEMCPY_SIZE, 0);
+ if (src == NULL)
+ return -ENOMEM;
+ dst = rte_malloc("dmadev_test_dst", TEST_MEMCPY_SIZE, 0);
+ if (dst == NULL)
+ return -ENOMEM;
+
+ total = 0;
+ passed = 0;
+ failed = 0;
+
+ return 0;
+}
+
+static void
+testsuite_teardown(void)
+{
+ rte_free(src);
+ rte_free(dst);
+ /* Ensure the dmadev is stopped. */
+ rte_dmadev_stop(test_dev_id);
+}
+
+static void
+testsuite_run_test(int (*test)(void), const char *name)
+{
+ int ret = 0;
+
+ if (test) {
+ ret = test();
+ if (ret < 0) {
+ failed++;
+ printf("%s Failed\n", name);
+ } else {
+ passed++;
+ printf("%s Passed\n", name);
+ }
+ }
+
+ total++;
+}
+
+static int
+test_dmadev_get_dev_id(void)
+{
+ int ret = rte_dmadev_get_dev_id("invalid_dmadev_device");
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_is_valid_dev(void)
+{
+ int ret;
+ ret = rte_dmadev_is_valid_dev(invalid_dev_id);
+ RTE_TEST_ASSERT(ret == false, "Expected false for invalid dev id");
+ ret = rte_dmadev_is_valid_dev(test_dev_id);
+ RTE_TEST_ASSERT(ret == true, "Expected true for valid dev id");
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_count(void)
+{
+ uint16_t count = rte_dmadev_count();
+ RTE_TEST_ASSERT(count > 0, "Invalid dmadev count %u", count);
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_info_get(void)
+{
+ struct rte_dmadev_info info = { 0 };
+ int ret;
+
+ ret = rte_dmadev_info_get(invalid_dev_id, &info);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_info_get(test_dev_id, NULL);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_info_get(test_dev_id, &info);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_configure(void)
+{
+ struct rte_dmadev_conf conf = { 0 };
+ struct rte_dmadev_info info = { 0 };
+ int ret;
+
+ /* Check for invalid parameters */
+ ret = rte_dmadev_configure(invalid_dev_id, &conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_configure(test_dev_id, NULL);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check for nb_vchans == 0 */
+ memset(&conf, 0, sizeof(conf));
+ ret = rte_dmadev_configure(test_dev_id, &conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check for conf.nb_vchans > info.max_vchans */
+ ret = rte_dmadev_info_get(test_dev_id, &info);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info");
+ memset(&conf, 0, sizeof(conf));
+ conf.nb_vchans = info.max_vchans + 1;
+ ret = rte_dmadev_configure(test_dev_id, &conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check enable silent mode */
+ memset(&conf, 0, sizeof(conf));
+ conf.nb_vchans = info.max_vchans;
+ conf.enable_silent = true;
+ ret = rte_dmadev_configure(test_dev_id, &conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Configure success */
+ memset(&conf, 0, sizeof(conf));
+ conf.nb_vchans = info.max_vchans;
+ ret = rte_dmadev_configure(test_dev_id, &conf);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to configure dmadev, %d", ret);
+
+ /* Check configure success */
+ ret = rte_dmadev_info_get(test_dev_id, &info);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info");
+ RTE_TEST_ASSERT_EQUAL(conf.nb_vchans, info.nb_vchans,
+ "Configure nb_vchans not match");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_vchan_setup(void)
+{
+ struct rte_dmadev_vchan_conf vchan_conf = { 0 };
+ struct rte_dmadev_conf dev_conf = { 0 };
+ struct rte_dmadev_info dev_info = { 0 };
+ int ret;
+
+ /* Check for invalid parameters */
+ ret = rte_dmadev_vchan_setup(invalid_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, NULL);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Make sure configure success */
+ ret = rte_dmadev_info_get(test_dev_id, &dev_info);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info");
+ dev_conf.nb_vchans = dev_info.max_vchans;
+ ret = rte_dmadev_configure(test_dev_id, &dev_conf);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to configure dmadev, %d", ret);
+
+ /* Check for invalid vchan */
+ ret = rte_dmadev_vchan_setup(test_dev_id, dev_conf.nb_vchans,
+ &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check for direction */
+ memset(&vchan_conf, 0, sizeof(vchan_conf));
+ vchan_conf.direction = RTE_DMA_DIR_DEV_TO_DEV + 1;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM - 1;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check for direction and dev_capa combination */
+ memset(&vchan_conf, 0, sizeof(vchan_conf));
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_DEV;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ vchan_conf.direction = RTE_DMA_DIR_DEV_TO_MEM;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ vchan_conf.direction = RTE_DMA_DIR_DEV_TO_DEV;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check for nb_desc validation */
+ memset(&vchan_conf, 0, sizeof(vchan_conf));
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM;
+ vchan_conf.nb_desc = dev_info.min_desc - 1;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ vchan_conf.nb_desc = dev_info.max_desc + 1;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check src port type validation */
+ memset(&vchan_conf, 0, sizeof(vchan_conf));
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM;
+ vchan_conf.nb_desc = dev_info.min_desc;
+ vchan_conf.src_port.port_type = RTE_DMADEV_PORT_PCIE;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check dst port type validation */
+ memset(&vchan_conf, 0, sizeof(vchan_conf));
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM;
+ vchan_conf.nb_desc = dev_info.min_desc;
+ vchan_conf.dst_port.port_type = RTE_DMADEV_PORT_PCIE;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check vchan setup success */
+ memset(&vchan_conf, 0, sizeof(vchan_conf));
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM;
+ vchan_conf.nb_desc = dev_info.min_desc;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup vchan, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+static int
+setup_one_vchan(void)
+{
+ struct rte_dmadev_vchan_conf vchan_conf = { 0 };
+ struct rte_dmadev_info dev_info = { 0 };
+ struct rte_dmadev_conf dev_conf = { 0 };
+ int ret;
+
+ ret = rte_dmadev_info_get(test_dev_id, &dev_info);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info, %d", ret);
+ dev_conf.nb_vchans = dev_info.max_vchans;
+ ret = rte_dmadev_configure(test_dev_id, &dev_conf);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to configure, %d", ret);
+ vchan_conf.direction = RTE_DMA_DIR_MEM_TO_MEM;
+ vchan_conf.nb_desc = dev_info.min_desc;
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup vchan, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_start_stop(void)
+{
+ struct rte_dmadev_vchan_conf vchan_conf = { 0 };
+ struct rte_dmadev_conf dev_conf = { 0 };
+ int ret;
+
+ /* Check for invalid parameters */
+ ret = rte_dmadev_start(invalid_dev_id);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_stop(invalid_dev_id);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Setup one vchan for later test */
+ ret = setup_one_vchan();
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
+
+ ret = rte_dmadev_start(test_dev_id);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to start, %d", ret);
+
+ /* Check reconfigure and vchan setup when device started */
+ ret = rte_dmadev_configure(test_dev_id, &dev_conf);
+ RTE_TEST_ASSERT(ret == -EBUSY, "Failed to configure, %d", ret);
+ ret = rte_dmadev_vchan_setup(test_dev_id, 0, &vchan_conf);
+ RTE_TEST_ASSERT(ret == -EBUSY, "Failed to setup vchan, %d", ret);
+
+ ret = rte_dmadev_stop(test_dev_id);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to stop, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_stats(void)
+{
+ struct rte_dmadev_info dev_info = { 0 };
+ struct rte_dmadev_stats stats = { 0 };
+ int ret;
+
+ /* Check for invalid parameters */
+ ret = rte_dmadev_stats_get(invalid_dev_id, 0, &stats);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_stats_get(invalid_dev_id, 0, NULL);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_stats_reset(invalid_dev_id, 0);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Setup one vchan for later test */
+ ret = setup_one_vchan();
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
+
+ /* Check for invalid vchan */
+ ret = rte_dmadev_info_get(test_dev_id, &dev_info);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to obtain device info, %d", ret);
+ ret = rte_dmadev_stats_get(test_dev_id, dev_info.max_vchans, &stats);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+ ret = rte_dmadev_stats_reset(test_dev_id, dev_info.max_vchans);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Expected -EINVAL, %d", ret);
+
+ /* Check for valid vchan */
+ ret = rte_dmadev_stats_get(test_dev_id, 0, &stats);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to get stats, %d", ret);
+ ret = rte_dmadev_stats_get(test_dev_id, RTE_DMADEV_ALL_VCHAN, &stats);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to get all stats, %d", ret);
+ ret = rte_dmadev_stats_reset(test_dev_id, 0);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to reset stats, %d", ret);
+ ret = rte_dmadev_stats_reset(test_dev_id, RTE_DMADEV_ALL_VCHAN);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to reset all stats, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_dump(void)
+{
+ int ret;
+
+ /* Check for invalid parameters */
+ ret = rte_dmadev_dump(invalid_dev_id, stderr);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Excepted -EINVAL, %d", ret);
+ ret = rte_dmadev_dump(test_dev_id, NULL);
+ RTE_TEST_ASSERT(ret == -EINVAL, "Excepted -EINVAL, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_completed(void)
+{
+ uint16_t last_idx = 1;
+ bool has_error = true;
+ uint16_t cpl_ret;
+ int ret, i;
+
+ /* Setup one vchan for later test */
+ ret = setup_one_vchan();
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
+
+ ret = rte_dmadev_start(test_dev_id);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to start, %d", ret);
+
+ /* Setup test memory */
+ for (i = 0; i < TEST_MEMCPY_SIZE; i++)
+ src[i] = (char)i;
+ memset(dst, 0, TEST_MEMCPY_SIZE);
+
+ /* Check enqueue without submit */
+ ret = rte_dmadev_copy(test_dev_id, 0, (rte_iova_t)src, (rte_iova_t)dst,
+ TEST_MEMCPY_SIZE, 0);
+ RTE_TEST_ASSERT_EQUAL(ret, 0, "Failed to enqueue copy, %d", ret);
+ rte_delay_us_sleep(TEST_WAIT_US_VAL);
+ cpl_ret = rte_dmadev_completed(test_dev_id, 0, 1, &last_idx,
+ &has_error);
+ RTE_TEST_ASSERT_EQUAL(cpl_ret, 0, "Failed to get completed");
+
+ /* Check add submit */
+ ret = rte_dmadev_submit(test_dev_id, 0);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to submit, %d", ret);
+ rte_delay_us_sleep(TEST_WAIT_US_VAL);
+ cpl_ret = rte_dmadev_completed(test_dev_id, 0, 1, &last_idx,
+ &has_error);
+ RTE_TEST_ASSERT_EQUAL(cpl_ret, 1, "Failed to get completed");
+ RTE_TEST_ASSERT_EQUAL(last_idx, 0, "Last idx should be zero, %u",
+ last_idx);
+ RTE_TEST_ASSERT_EQUAL(has_error, false, "Should have no error");
+ for (i = 0; i < TEST_MEMCPY_SIZE; i++) {
+ if (src[i] != dst[i]) {
+ RTE_TEST_ASSERT_EQUAL(src[i], dst[i],
+ "Failed to copy memory, %d %d", src[i], dst[i]);
+ break;
+ }
+ }
+
+ /* Setup test memory */
+ for (i = 0; i < TEST_MEMCPY_SIZE; i++)
+ src[i] = (char)i;
+ memset(dst, 0, TEST_MEMCPY_SIZE);
+
+ /* Check for enqueue with submit */
+ ret = rte_dmadev_copy(test_dev_id, 0, (rte_iova_t)src, (rte_iova_t)dst,
+ TEST_MEMCPY_SIZE, RTE_DMA_OP_FLAG_SUBMIT);
+ RTE_TEST_ASSERT_EQUAL(ret, 1, "Failed to enqueue copy, %d", ret);
+ rte_delay_us_sleep(TEST_WAIT_US_VAL);
+ cpl_ret = rte_dmadev_completed(test_dev_id, 0, 1, &last_idx,
+ &has_error);
+ RTE_TEST_ASSERT_EQUAL(cpl_ret, 1, "Failed to get completed");
+ RTE_TEST_ASSERT_EQUAL(last_idx, 1, "Last idx should be 1, %u",
+ last_idx);
+ RTE_TEST_ASSERT_EQUAL(has_error, false, "Should have no error");
+ for (i = 0; i < TEST_MEMCPY_SIZE; i++) {
+ if (src[i] != dst[i]) {
+ RTE_TEST_ASSERT_EQUAL(src[i], dst[i],
+ "Failed to copy memory, %d %d", src[i], dst[i]);
+ break;
+ }
+ }
+
+ /* Stop dmadev to make sure dmadev to a known state */
+ ret = rte_dmadev_stop(test_dev_id);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to stop, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_dmadev_completed_status(void)
+{
+ enum rte_dma_status_code status[1] = { 1 };
+ uint16_t last_idx = 1;
+ uint16_t cpl_ret, i;
+ int ret;
+
+ /* Setup one vchan for later test */
+ ret = setup_one_vchan();
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to setup one vchan, %d", ret);
+
+ ret = rte_dmadev_start(test_dev_id);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to start, %d", ret);
+
+ /* Check for enqueue with submit */
+ ret = rte_dmadev_copy(test_dev_id, 0, (rte_iova_t)src, (rte_iova_t)dst,
+ TEST_MEMCPY_SIZE, RTE_DMA_OP_FLAG_SUBMIT);
+ RTE_TEST_ASSERT_EQUAL(ret, 0, "Failed to enqueue copy, %d", ret);
+ rte_delay_us_sleep(TEST_WAIT_US_VAL);
+ cpl_ret = rte_dmadev_completed_status(test_dev_id, 0, 1, &last_idx,
+ status);
+ RTE_TEST_ASSERT_EQUAL(cpl_ret, 1, "Failed to completed status");
+ RTE_TEST_ASSERT_EQUAL(last_idx, 0, "Last idx should be zero, %u",
+ last_idx);
+ for (i = 0; i < RTE_DIM(status); i++)
+ RTE_TEST_ASSERT_EQUAL(status[i], 0,
+ "Failed to completed status, %d", status[i]);
+
+ /* Check do completed status again */
+ cpl_ret = rte_dmadev_completed_status(test_dev_id, 0, 1, &last_idx,
+ status);
+ RTE_TEST_ASSERT_EQUAL(cpl_ret, 0, "Failed to completed status");
+
+ /* Check for enqueue with submit again */
+ ret = rte_dmadev_copy(test_dev_id, 0, (rte_iova_t)src, (rte_iova_t)dst,
+ TEST_MEMCPY_SIZE, RTE_DMA_OP_FLAG_SUBMIT);
+ RTE_TEST_ASSERT_EQUAL(ret, 1, "Failed to enqueue copy, %d", ret);
+ rte_delay_us_sleep(TEST_WAIT_US_VAL);
+ cpl_ret = rte_dmadev_completed_status(test_dev_id, 0, 1, &last_idx,
+ status);
+ RTE_TEST_ASSERT_EQUAL(cpl_ret, 1, "Failed to completed status");
+ RTE_TEST_ASSERT_EQUAL(last_idx, 1, "Last idx should be 1, %u",
+ last_idx);
+ for (i = 0; i < RTE_DIM(status); i++)
+ RTE_TEST_ASSERT_EQUAL(status[i], 0,
+ "Failed to completed status, %d", status[i]);
+
+ /* Stop dmadev to make sure dmadev to a known state */
+ ret = rte_dmadev_stop(test_dev_id);
+ RTE_TEST_ASSERT_SUCCESS(ret, "Failed to stop, %d", ret);
+
+ return TEST_SUCCESS;
+}
+
+int
+test_dmadev_api(uint16_t dev_id)
+{
+ int ret = testsuite_setup(dev_id);
+ if (ret) {
+ printf("testsuite setup fail!\n");
+ return -1;
+ }
+
+ /* If the testcase exit successfully, ensure that the test dmadev exist
+ * and the dmadev is in the stopped state.
+ */
+ SKELDMA_TEST_RUN(test_dmadev_get_dev_id);
+ SKELDMA_TEST_RUN(test_dmadev_is_valid_dev);
+ SKELDMA_TEST_RUN(test_dmadev_count);
+ SKELDMA_TEST_RUN(test_dmadev_info_get);
+ SKELDMA_TEST_RUN(test_dmadev_configure);
+ SKELDMA_TEST_RUN(test_dmadev_vchan_setup);
+ SKELDMA_TEST_RUN(test_dmadev_start_stop);
+ SKELDMA_TEST_RUN(test_dmadev_stats);
+ SKELDMA_TEST_RUN(test_dmadev_dump);
+ SKELDMA_TEST_RUN(test_dmadev_completed);
+ SKELDMA_TEST_RUN(test_dmadev_completed_status);
+
+ testsuite_teardown();
+
+ printf("Total tests : %d\n", total);
+ printf("Passed : %d\n", passed);
+ printf("Failed : %d\n", failed);
+
+ if (failed)
+ return -1;
+
+ return 0;
+};