[v9,01/18] net/mana: add basic driver with build environment and doc

Message ID 1663987546-15982-2-git-send-email-longli@linuxonhyperv.com (mailing list archive)
State Superseded, archived
Delegated to: Ferruh Yigit
Headers
Series Introduce Microsoft Azure Network Adatper (MANA) PMD |

Checks

Context Check Description
ci/checkpatch warning coding style issues

Commit Message

Long Li Sept. 24, 2022, 2:45 a.m. UTC
  From: Long Li <longli@microsoft.com>

MANA is a PCI device. It uses IB verbs to access hardware through the
kernel RDMA layer. This patch introduces build environment and basic
device probe functions.

Signed-off-by: Long Li <longli@microsoft.com>
---
Change log:
v2:
Fix typos.
Make the driver build only on x86-64 and Linux.
Remove unused header files.
Change port definition to uint16_t or uint8_t (for IB).
Use getline() in place of fgets() to read and truncate a line.
v3:
Add meson build check for required functions from RDMA direct verb header file
v4:
Remove extra "\n" in logging code.
Use "r" in place of "rb" in fopen() to read text files.
v7:
Remove RTE_ETH_TX_OFFLOAD_TCP_TSO from offload cap.
v8:
Add clarification on driver args usage to nics guide.
Fix coding sytle on function definitions.
Use different variable names in MANA_MKSTR.
Use MANA_ prefix for all macros.
Use RTE_PMD_REGISTER_PCI in place of rte_pci_register.
Add .vendor_id = 0 to the end of PCI table.
Remove RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS from dev_flags.
v9:
Move unused data fields from the header file to later patches that use them.
Add minimum required versions in doc/guides/nics/mana.rst.
Remove .name = "net_mana" from rte_pci_driver.

 MAINTAINERS                       |   6 +
 doc/guides/nics/features/mana.ini |  10 +
 doc/guides/nics/index.rst         |   1 +
 doc/guides/nics/mana.rst          |  69 +++
 drivers/net/mana/mana.c           | 725 ++++++++++++++++++++++++++++++
 drivers/net/mana/mana.h           | 102 +++++
 drivers/net/mana/meson.build      |  44 ++
 drivers/net/mana/mp.c             | 241 ++++++++++
 drivers/net/mana/version.map      |   3 +
 drivers/net/meson.build           |   1 +
 10 files changed, 1202 insertions(+)
 create mode 100644 doc/guides/nics/features/mana.ini
 create mode 100644 doc/guides/nics/mana.rst
 create mode 100644 drivers/net/mana/mana.c
 create mode 100644 drivers/net/mana/mana.h
 create mode 100644 drivers/net/mana/meson.build
 create mode 100644 drivers/net/mana/mp.c
 create mode 100644 drivers/net/mana/version.map
  

Comments

Ferruh Yigit Oct. 4, 2022, 5:47 p.m. UTC | #1
On 9/24/2022 3:45 AM, longli@linuxonhyperv.com wrote:

> 
> From: Long Li <longli@microsoft.com>
> 
> MANA is a PCI device. It uses IB verbs to access hardware through the
> kernel RDMA layer. This patch introduces build environment and basic
> device probe functions.
> 
> Signed-off-by: Long Li <longli@microsoft.com>

<...>

> +++ b/doc/guides/nics/mana.rst
> @@ -0,0 +1,69 @@
> +..  SPDX-License-Identifier: BSD-3-Clause
> +    Copyright 2022 Microsoft Corporation
> +
> +MANA poll mode driver library
> +=============================
> +
> +The MANA poll mode driver library (**librte_net_mana**) implements support
> +for Microsoft Azure Network Adapter VF in SR-IOV context.
> +
> +Features
> +--------
> +
> +Features of the MANA Ethdev PMD are:
> +
> +Prerequisites
> +-------------
> +
> +This driver relies on external libraries and kernel drivers for resources
> +allocations and initialization. The following dependencies are not part of
> +DPDK and must be installed separately:
> +
> +- **libibverbs** (provided by rdma-core package)
> +

Does it make sense to provide rdma-core git repo link?

<...>

> +
> +static const char * const mana_init_args[] = {
> +       "mac",

It is better to define a macro for the devarg string to be able to reuse 
it in 'RTE_PMD_REGISTER_PARAM_STRING' (please see below).

#define ETH_MANA_MAC_ARG "mac"
static const char * const mana_init_args[] = {
	ETH_MANA_MAC_ARG,
	NULL,
};

<...>

> +
> +/*
> + * Goes through the IB device list to look for the IB port matching the
> + * mac_addr. If found, create a rte_eth_dev for it.
> + */
> +static int
> +mana_pci_probe_mac(struct rte_pci_device *pci_dev,
> +                  struct rte_ether_addr *mac_addr)
> +{
> +       struct ibv_device **ibv_list;
> +       int ibv_idx;
> +       struct ibv_context *ctx;
> +       struct ibv_device_attr_ex dev_attr;
> +       int num_devices;
> +       int ret = 0;
> +       uint8_t port;
> +       struct mana_priv *priv = NULL;
> +       struct rte_eth_dev *eth_dev = NULL;
> +       bool found_port;
> +
> +       ibv_list = ibv_get_device_list(&num_devices);
> +       for (ibv_idx = 0; ibv_idx < num_devices; ibv_idx++) {
> +               struct ibv_device *ibdev = ibv_list[ibv_idx];
> +               struct rte_pci_addr pci_addr;
> +
> +               DRV_LOG(INFO, "Probe device name %s dev_name %s ibdev_path %s",
> +                       ibdev->name, ibdev->dev_name, ibdev->ibdev_path);
> +
> +               if (mana_ibv_device_to_pci_addr(ibdev, &pci_addr))
> +                       continue;
> +
> +               /* Ignore if this IB device is not this PCI device */
> +               if (pci_dev->addr.domain != pci_addr.domain ||
> +                   pci_dev->addr.bus != pci_addr.bus ||
> +                   pci_dev->addr.devid != pci_addr.devid ||
> +                   pci_dev->addr.function != pci_addr.function)
> +                       continue;
> +
> +               ctx = ibv_open_device(ibdev);
> +               if (!ctx) {
> +                       DRV_LOG(ERR, "Failed to open IB device %s",
> +                               ibdev->name);
> +                       continue;
> +               }
> +
> +               ret = ibv_query_device_ex(ctx, NULL, &dev_attr);
> +               DRV_LOG(INFO, "dev_attr.orig_attr.phys_port_cnt %u",
> +                       dev_attr.orig_attr.phys_port_cnt);
> +               found_port = false;
> +
> +               for (port = 1; port <= dev_attr.orig_attr.phys_port_cnt;
> +                    port++) {
> +                       struct ibv_parent_domain_init_attr attr = {0};
> +                       struct rte_ether_addr addr;
> +                       char address[64];
> +                       char name[RTE_ETH_NAME_MAX_LEN];
> +
> +                       ret = get_port_mac(ibdev, port, &addr);
> +                       if (ret)
> +                               continue;
> +
> +                       if (mac_addr && !rte_is_same_ether_addr(&addr, mac_addr))
> +                               continue;
> +
> +                       rte_ether_format_addr(address, sizeof(address), &addr);
> +                       DRV_LOG(INFO, "device located port %u address %s",
> +                               port, address);
> +                       found_port = true;
> +
> +                       priv = rte_zmalloc_socket(NULL, sizeof(*priv),
> +                                                 RTE_CACHE_LINE_SIZE,
> +                                                 SOCKET_ID_ANY);
> +                       if (!priv) {
> +                               ret = -ENOMEM;
> +                               goto failed;
> +                       }
> +
> +                       snprintf(name, sizeof(name), "%s_port%d",
> +                                pci_dev->device.name, port);
> +
> +                       if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
> +                               int fd;
> +
> +                               eth_dev = rte_eth_dev_attach_secondary(name);
> +                               if (!eth_dev) {
> +                                       DRV_LOG(ERR, "Can't attach to dev %s",
> +                                               name);
> +                                       ret = -ENOMEM;
> +                                       goto failed;
> +                               }
> +
> +                               eth_dev->device = &pci_dev->device;
> +                               eth_dev->dev_ops = &mana_dev_secondary_ops;
> +                               ret = mana_proc_priv_init(eth_dev);
> +                               if (ret)
> +                                       goto failed;
> +                               priv->process_priv = eth_dev->process_private;
> +
> +                               /* Get the IB FD from the primary process */
> +                               fd = mana_mp_req_verbs_cmd_fd(eth_dev);
> +                               if (fd < 0) {
> +                                       DRV_LOG(ERR, "Failed to get FD %d", fd);
> +                                       ret = -ENODEV;
> +                                       goto failed;
> +                               }
> +
> +                               ret = mana_map_doorbell_secondary(eth_dev, fd);
> +                               if (ret) {
> +                                       DRV_LOG(ERR, "Failed secondary map %d",
> +                                               fd);

The indentation level (and lenght) of this functions hints that some 
part of it can be seprated as function, like probe one 'ibv_device' can 
be on its own function.

Can you refactor the function, to increase readability? It is control 
path, so there is no restriction to have function calls.

> +                                       goto failed;
> +                               }
> +
> +                               /* fd is no not used after mapping doorbell */
> +                               close(fd);
> +
> +                               rte_spinlock_lock(&mana_shared_data->lock);
> +                               mana_shared_data->secondary_cnt++;
> +                               mana_local_data.secondary_cnt++;
> +                               rte_spinlock_unlock(&mana_shared_data->lock);
> +
> +                               rte_eth_copy_pci_info(eth_dev, pci_dev);
> +                               rte_eth_dev_probing_finish(eth_dev);
> +
> +                               /* Impossible to have more than one port
> +                                * matching a MAC address
> +                                */
> +                               continue;
> +                       }
> +
> +                       eth_dev = rte_eth_dev_allocate(name);
> +                       if (!eth_dev) {
> +                               ret = -ENOMEM;
> +                               goto failed;
> +                       }
> +
> +                       eth_dev->data->mac_addrs =
> +                               rte_calloc("mana_mac", 1,
> +                                          sizeof(struct rte_ether_addr), 0);
> +                       if (!eth_dev->data->mac_addrs) {
> +                               ret = -ENOMEM;
> +                               goto failed;
> +                       }
> +
> +                       rte_ether_addr_copy(&addr, eth_dev->data->mac_addrs);
> +
> +                       priv->ib_pd = ibv_alloc_pd(ctx);
> +                       if (!priv->ib_pd) {
> +                               DRV_LOG(ERR, "ibv_alloc_pd failed port %d", port);
> +                               ret = -ENOMEM;
> +                               goto failed;
> +                       }
> +
> +                       /* Create a parent domain with the port number */
> +                       attr.pd = priv->ib_pd;
> +                       attr.comp_mask = IBV_PARENT_DOMAIN_INIT_ATTR_PD_CONTEXT;
> +                       attr.pd_context = (void *)(uint64_t)port;
> +                       priv->ib_parent_pd = ibv_alloc_parent_domain(ctx, &attr);
> +                       if (!priv->ib_parent_pd) {
> +                               DRV_LOG(ERR,
> +                                       "ibv_alloc_parent_domain failed port %d",
> +                                       port);
> +                               ret = -ENOMEM;
> +                               goto failed;
> +                       }
> +
> +                       priv->ib_ctx = ctx;
> +                       priv->port_id = eth_dev->data->port_id;
> +                       priv->dev_port = port;
> +                       eth_dev->data->dev_private = priv;
> +                       priv->dev_data = eth_dev->data;
> +
> +                       priv->max_rx_queues = dev_attr.orig_attr.max_qp;
> +                       priv->max_tx_queues = dev_attr.orig_attr.max_qp;
> +
> +                       priv->max_rx_desc =
> +                               RTE_MIN(dev_attr.orig_attr.max_qp_wr,
> +                                       dev_attr.orig_attr.max_cqe);
> +                       priv->max_tx_desc =
> +                               RTE_MIN(dev_attr.orig_attr.max_qp_wr,
> +                                       dev_attr.orig_attr.max_cqe);
> +
> +                       priv->max_send_sge = dev_attr.orig_attr.max_sge;
> +                       priv->max_recv_sge = dev_attr.orig_attr.max_sge;
> +
> +                       priv->max_mr = dev_attr.orig_attr.max_mr;
> +                       priv->max_mr_size = dev_attr.orig_attr.max_mr_size;
> +
> +                       DRV_LOG(INFO, "dev %s max queues %d desc %d sge %d",
> +                               name, priv->max_rx_queues, priv->max_rx_desc,
> +                               priv->max_send_sge);
> +
> +                       rte_spinlock_lock(&mana_shared_data->lock);
> +                       mana_shared_data->primary_cnt++;
> +                       rte_spinlock_unlock(&mana_shared_data->lock);
> +
> +                       eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_RMV;
> +

This assignment already done by 'rte_eth_copy_pci_info()' when 
'RTE_PCI_DRV_INTR_RMV' driver flag set which this PMD sets, so 
assignment is redundant.

<...>

> +
> +RTE_PMD_REGISTER_PCI(net_mana, mana_pci_driver);
> +RTE_PMD_REGISTER_PCI_TABLE(net_mana, mana_pci_id_map);
> +RTE_PMD_REGISTER_KMOD_DEP(net_mana, "* ib_uverbs & mana_ib");
> +RTE_LOG_REGISTER_SUFFIX(mana_logtype_init, init, NOTICE);
> +RTE_LOG_REGISTER_SUFFIX(mana_logtype_driver, driver, NOTICE);

Can you please add 'RTE_PMD_REGISTER_PARAM_STRING' macro for 'mac' devarg?

> diff --git a/drivers/net/mana/mana.h b/drivers/net/mana/mana.h
> new file mode 100644
> index 0000000000..a2021ceb4a
> --- /dev/null
> +++ b/drivers/net/mana/mana.h
> @@ -0,0 +1,102 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright 2022 Microsoft Corporation
> + */
> +
> +#ifndef __MANA_H__
> +#define __MANA_H__
> +
> +enum {
> +       PCI_VENDOR_ID_MICROSOFT = 0x1414,
> +};
> +
> +enum {
> +       PCI_DEVICE_ID_MICROSOFT_MANA = 0x00ba,
> +};

There is a common guidance to prefer enums against define BUT,

I tend to use enums for related cases, or when underneath numerical 
value doesn't matter.

For PCI IDs I would use #define, although both works same, what do you 
think to update them to define?
  

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 18d9edaf88..b8bda48a33 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -837,6 +837,12 @@  F: buildtools/options-ibverbs-static.sh
 F: doc/guides/nics/mlx5.rst
 F: doc/guides/nics/features/mlx5.ini
 
+Microsoft mana
+M: Long Li <longli@microsoft.com>
+F: drivers/net/mana
+F: doc/guides/nics/mana.rst
+F: doc/guides/nics/features/mana.ini
+
 Microsoft vdev_netvsc - EXPERIMENTAL
 M: Matan Azrad <matan@nvidia.com>
 F: drivers/net/vdev_netvsc/
diff --git a/doc/guides/nics/features/mana.ini b/doc/guides/nics/features/mana.ini
new file mode 100644
index 0000000000..b92a27374c
--- /dev/null
+++ b/doc/guides/nics/features/mana.ini
@@ -0,0 +1,10 @@ 
+;
+; Supported features of the 'mana' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux                = Y
+Multiprocess aware   = Y
+Usage doc            = Y
+x86-64               = Y
diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst
index 1c94caccea..2725d1d9f0 100644
--- a/doc/guides/nics/index.rst
+++ b/doc/guides/nics/index.rst
@@ -41,6 +41,7 @@  Network Interface Controller Drivers
     intel_vf
     kni
     liquidio
+    mana
     memif
     mlx4
     mlx5
diff --git a/doc/guides/nics/mana.rst b/doc/guides/nics/mana.rst
new file mode 100644
index 0000000000..6d12670bfb
--- /dev/null
+++ b/doc/guides/nics/mana.rst
@@ -0,0 +1,69 @@ 
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright 2022 Microsoft Corporation
+
+MANA poll mode driver library
+=============================
+
+The MANA poll mode driver library (**librte_net_mana**) implements support
+for Microsoft Azure Network Adapter VF in SR-IOV context.
+
+Features
+--------
+
+Features of the MANA Ethdev PMD are:
+
+Prerequisites
+-------------
+
+This driver relies on external libraries and kernel drivers for resources
+allocations and initialization. The following dependencies are not part of
+DPDK and must be installed separately:
+
+- **libibverbs** (provided by rdma-core package)
+
+  User space verbs framework used by librte_net_mana. This library provides
+  a generic interface between the kernel and low-level user space drivers
+  such as libmana.
+
+  It allows slow and privileged operations (context initialization, hardware
+  resources allocations) to be managed by the kernel and fast operations to
+  never leave user space. The minimum required rdma-core version is v43.
+
+- **libmana** (provided by rdma-core package)
+
+  Low-level user space driver library for Microsoft Azure Network Adapter
+  devices, it is automatically loaded by libibverbs. The minimum required
+  version of rdma-core with libmana is v43.
+
+- **Kernel modules**
+
+  They provide the kernel-side verbs API and low level device drivers that
+  manage actual hardware initialization and resources sharing with user
+  space processes. The minimum required Linux kernel version is 6.1.
+
+  Unlike most other PMDs, these modules must remain loaded and bound to
+  their devices:
+
+  - mana: Ethernet device driver that provides kernel network interfaces.
+  - mana_ib: InifiniBand device driver.
+  - ib_uverbs: user space driver for verbs (entry point for libibverbs).
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+MANA PMD arguments
+--------------------
+
+The user can specify below argument in devargs.
+
+#.  ``mac``:
+
+    Specify the MAC address for this device. If it is set, the driver
+    probes and loads the NIC with a matching mac address. If it is not
+    set, the driver probes on all the NICs on the PCI device. The default
+    value is not set, meaning all the NICs will be probed and loaded.
+    User can specify multiple mac=xx:xx:xx:xx:xx:xx arguments for up to
+    8 NICs.
diff --git a/drivers/net/mana/mana.c b/drivers/net/mana/mana.c
new file mode 100644
index 0000000000..1c317418b6
--- /dev/null
+++ b/drivers/net/mana/mana.c
@@ -0,0 +1,725 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2022 Microsoft Corporation
+ */
+
+#include <unistd.h>
+#include <dirent.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#include <ethdev_driver.h>
+#include <ethdev_pci.h>
+#include <rte_kvargs.h>
+#include <rte_eal_paging.h>
+
+#include <infiniband/verbs.h>
+#include <infiniband/manadv.h>
+
+#include <assert.h>
+
+#include "mana.h"
+
+/* Shared memory between primary/secondary processes, per driver */
+/* Data to track primary/secondary usage */
+struct mana_shared_data *mana_shared_data;
+static struct mana_shared_data mana_local_data;
+
+/* The memory region for the above data */
+static const struct rte_memzone *mana_shared_mz;
+static const char *MZ_MANA_SHARED_DATA = "mana_shared_data";
+
+/* Spinlock for mana_shared_data */
+static rte_spinlock_t mana_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
+
+/* Allocate a buffer on the stack and fill it with a printf format string. */
+#define MANA_MKSTR(name, ...) \
+	int mkstr_size_##name = snprintf(NULL, 0, "" __VA_ARGS__); \
+	char name[mkstr_size_##name + 1]; \
+	\
+	memset(name, 0, mkstr_size_##name + 1); \
+	snprintf(name, sizeof(name), "" __VA_ARGS__)
+
+int mana_logtype_driver;
+int mana_logtype_init;
+
+static const struct eth_dev_ops mana_dev_ops = {
+};
+
+static const struct eth_dev_ops mana_dev_secondary_ops = {
+};
+
+uint16_t
+mana_rx_burst_removed(void *dpdk_rxq __rte_unused,
+		      struct rte_mbuf **pkts __rte_unused,
+		      uint16_t pkts_n __rte_unused)
+{
+	rte_mb();
+	return 0;
+}
+
+uint16_t
+mana_tx_burst_removed(void *dpdk_rxq __rte_unused,
+		      struct rte_mbuf **pkts __rte_unused,
+		      uint16_t pkts_n __rte_unused)
+{
+	rte_mb();
+	return 0;
+}
+
+static const char * const mana_init_args[] = {
+	"mac",
+	NULL,
+};
+
+/* Support of parsing up to 8 mac address from EAL command line */
+#define MAX_NUM_ADDRESS 8
+struct mana_conf {
+	struct rte_ether_addr mac_array[MAX_NUM_ADDRESS];
+	unsigned int index;
+};
+
+static int
+mana_arg_parse_callback(const char *key, const char *val, void *private)
+{
+	struct mana_conf *conf = (struct mana_conf *)private;
+	int ret;
+
+	DRV_LOG(INFO, "key=%s value=%s index=%d", key, val, conf->index);
+
+	if (conf->index >= MAX_NUM_ADDRESS) {
+		DRV_LOG(ERR, "Exceeding max MAC address");
+		return 1;
+	}
+
+	ret = rte_ether_unformat_addr(val, &conf->mac_array[conf->index]);
+	if (ret) {
+		DRV_LOG(ERR, "Invalid MAC address %s", val);
+		return ret;
+	}
+
+	conf->index++;
+
+	return 0;
+}
+
+static int
+mana_parse_args(struct rte_devargs *devargs, struct mana_conf *conf)
+{
+	struct rte_kvargs *kvlist;
+	unsigned int arg_count;
+	int ret = 0;
+
+	kvlist = rte_kvargs_parse(devargs->drv_str, mana_init_args);
+	if (!kvlist) {
+		DRV_LOG(ERR, "failed to parse kvargs args=%s", devargs->drv_str);
+		return -EINVAL;
+	}
+
+	arg_count = rte_kvargs_count(kvlist, mana_init_args[0]);
+	if (arg_count > MAX_NUM_ADDRESS) {
+		ret = -EINVAL;
+		goto free_kvlist;
+	}
+	ret = rte_kvargs_process(kvlist, mana_init_args[0],
+				 mana_arg_parse_callback, conf);
+	if (ret) {
+		DRV_LOG(ERR, "error parsing args");
+		goto free_kvlist;
+	}
+
+free_kvlist:
+	rte_kvargs_free(kvlist);
+	return ret;
+}
+
+static int
+get_port_mac(struct ibv_device *device, unsigned int port,
+	     struct rte_ether_addr *addr)
+{
+	FILE *file;
+	int ret = 0;
+	DIR *dir;
+	struct dirent *dent;
+	unsigned int dev_port;
+	char mac[20];
+
+	MANA_MKSTR(path, "%s/device/net", device->ibdev_path);
+
+	dir = opendir(path);
+	if (!dir)
+		return -ENOENT;
+
+	while ((dent = readdir(dir))) {
+		char *name = dent->d_name;
+
+		MANA_MKSTR(port_path, "%s/%s/dev_port", path, name);
+
+		/* Ignore . and .. */
+		if ((name[0] == '.') &&
+		    ((name[1] == '\0') ||
+		     ((name[1] == '.') && (name[2] == '\0'))))
+			continue;
+
+		file = fopen(port_path, "r");
+		if (!file)
+			continue;
+
+		ret = fscanf(file, "%u", &dev_port);
+		fclose(file);
+
+		if (ret != 1)
+			continue;
+
+		/* Ethernet ports start at 0, IB port start at 1 */
+		if (dev_port == port - 1) {
+			MANA_MKSTR(address_path, "%s/%s/address", path, name);
+
+			file = fopen(address_path, "r");
+			if (!file)
+				continue;
+
+			ret = fscanf(file, "%s", mac);
+			fclose(file);
+
+			if (ret < 0)
+				break;
+
+			ret = rte_ether_unformat_addr(mac, addr);
+			if (ret)
+				DRV_LOG(ERR, "unrecognized mac addr %s", mac);
+			break;
+		}
+	}
+
+	closedir(dir);
+	return ret;
+}
+
+static int
+mana_ibv_device_to_pci_addr(const struct ibv_device *device,
+			    struct rte_pci_addr *pci_addr)
+{
+	FILE *file;
+	char *line = NULL;
+	size_t len = 0;
+
+	MANA_MKSTR(path, "%s/device/uevent", device->ibdev_path);
+
+	file = fopen(path, "r");
+	if (!file)
+		return -errno;
+
+	while (getline(&line, &len, file) != -1) {
+		/* Extract information. */
+		if (sscanf(line,
+			   "PCI_SLOT_NAME="
+			   "%" SCNx32 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
+			   &pci_addr->domain,
+			   &pci_addr->bus,
+			   &pci_addr->devid,
+			   &pci_addr->function) == 4) {
+			break;
+		}
+	}
+
+	free(line);
+	fclose(file);
+	return 0;
+}
+
+static int
+mana_proc_priv_init(struct rte_eth_dev *dev)
+{
+	struct mana_process_priv *priv;
+
+	priv = rte_zmalloc_socket("mana_proc_priv",
+				  sizeof(struct mana_process_priv),
+				  RTE_CACHE_LINE_SIZE,
+				  dev->device->numa_node);
+	if (!priv)
+		return -ENOMEM;
+
+	dev->process_private = priv;
+	return 0;
+}
+
+/*
+ * Map the doorbell page for the secondary process through IB device handle.
+ */
+static int
+mana_map_doorbell_secondary(struct rte_eth_dev *eth_dev, int fd)
+{
+	struct mana_process_priv *priv = eth_dev->process_private;
+
+	void *addr;
+
+	addr = mmap(NULL, rte_mem_page_size(), PROT_WRITE, MAP_SHARED, fd, 0);
+	if (addr == MAP_FAILED) {
+		DRV_LOG(ERR, "Failed to map secondary doorbell port %u",
+			eth_dev->data->port_id);
+		return -ENOMEM;
+	}
+
+	DRV_LOG(INFO, "Secondary doorbell mapped to %p", addr);
+
+	priv->db_page = addr;
+
+	return 0;
+}
+
+/* Initialize shared data for the driver (all devices) */
+static int
+mana_init_shared_data(void)
+{
+	int ret =  0;
+	const struct rte_memzone *secondary_mz;
+
+	rte_spinlock_lock(&mana_shared_data_lock);
+
+	/* Skip if shared data is already initialized */
+	if (mana_shared_data)
+		goto exit;
+
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		mana_shared_mz = rte_memzone_reserve(MZ_MANA_SHARED_DATA,
+						     sizeof(*mana_shared_data),
+						     SOCKET_ID_ANY, 0);
+		if (!mana_shared_mz) {
+			DRV_LOG(ERR, "Cannot allocate mana shared data");
+			ret = -rte_errno;
+			goto exit;
+		}
+
+		mana_shared_data = mana_shared_mz->addr;
+		memset(mana_shared_data, 0, sizeof(*mana_shared_data));
+		rte_spinlock_init(&mana_shared_data->lock);
+	} else {
+		secondary_mz = rte_memzone_lookup(MZ_MANA_SHARED_DATA);
+		if (!secondary_mz) {
+			DRV_LOG(ERR, "Cannot attach mana shared data");
+			ret = -rte_errno;
+			goto exit;
+		}
+
+		mana_shared_data = secondary_mz->addr;
+		memset(&mana_local_data, 0, sizeof(mana_local_data));
+	}
+
+exit:
+	rte_spinlock_unlock(&mana_shared_data_lock);
+
+	return ret;
+}
+
+/*
+ * Init the data structures for use in primary and secondary processes.
+ */
+static int
+mana_init_once(void)
+{
+	int ret;
+
+	ret = mana_init_shared_data();
+	if (ret)
+		return ret;
+
+	rte_spinlock_lock(&mana_shared_data->lock);
+
+	switch (rte_eal_process_type()) {
+	case RTE_PROC_PRIMARY:
+		if (mana_shared_data->init_done)
+			break;
+
+		ret = mana_mp_init_primary();
+		if (ret)
+			break;
+		DRV_LOG(ERR, "MP INIT PRIMARY");
+
+		mana_shared_data->init_done = 1;
+		break;
+
+	case RTE_PROC_SECONDARY:
+
+		if (mana_local_data.init_done)
+			break;
+
+		ret = mana_mp_init_secondary();
+		if (ret)
+			break;
+
+		DRV_LOG(ERR, "MP INIT SECONDARY");
+
+		mana_local_data.init_done = 1;
+		break;
+
+	default:
+		/* Impossible, internal error */
+		ret = -EPROTO;
+		break;
+	}
+
+	rte_spinlock_unlock(&mana_shared_data->lock);
+
+	return ret;
+}
+
+/*
+ * Goes through the IB device list to look for the IB port matching the
+ * mac_addr. If found, create a rte_eth_dev for it.
+ */
+static int
+mana_pci_probe_mac(struct rte_pci_device *pci_dev,
+		   struct rte_ether_addr *mac_addr)
+{
+	struct ibv_device **ibv_list;
+	int ibv_idx;
+	struct ibv_context *ctx;
+	struct ibv_device_attr_ex dev_attr;
+	int num_devices;
+	int ret = 0;
+	uint8_t port;
+	struct mana_priv *priv = NULL;
+	struct rte_eth_dev *eth_dev = NULL;
+	bool found_port;
+
+	ibv_list = ibv_get_device_list(&num_devices);
+	for (ibv_idx = 0; ibv_idx < num_devices; ibv_idx++) {
+		struct ibv_device *ibdev = ibv_list[ibv_idx];
+		struct rte_pci_addr pci_addr;
+
+		DRV_LOG(INFO, "Probe device name %s dev_name %s ibdev_path %s",
+			ibdev->name, ibdev->dev_name, ibdev->ibdev_path);
+
+		if (mana_ibv_device_to_pci_addr(ibdev, &pci_addr))
+			continue;
+
+		/* Ignore if this IB device is not this PCI device */
+		if (pci_dev->addr.domain != pci_addr.domain ||
+		    pci_dev->addr.bus != pci_addr.bus ||
+		    pci_dev->addr.devid != pci_addr.devid ||
+		    pci_dev->addr.function != pci_addr.function)
+			continue;
+
+		ctx = ibv_open_device(ibdev);
+		if (!ctx) {
+			DRV_LOG(ERR, "Failed to open IB device %s",
+				ibdev->name);
+			continue;
+		}
+
+		ret = ibv_query_device_ex(ctx, NULL, &dev_attr);
+		DRV_LOG(INFO, "dev_attr.orig_attr.phys_port_cnt %u",
+			dev_attr.orig_attr.phys_port_cnt);
+		found_port = false;
+
+		for (port = 1; port <= dev_attr.orig_attr.phys_port_cnt;
+		     port++) {
+			struct ibv_parent_domain_init_attr attr = {0};
+			struct rte_ether_addr addr;
+			char address[64];
+			char name[RTE_ETH_NAME_MAX_LEN];
+
+			ret = get_port_mac(ibdev, port, &addr);
+			if (ret)
+				continue;
+
+			if (mac_addr && !rte_is_same_ether_addr(&addr, mac_addr))
+				continue;
+
+			rte_ether_format_addr(address, sizeof(address), &addr);
+			DRV_LOG(INFO, "device located port %u address %s",
+				port, address);
+			found_port = true;
+
+			priv = rte_zmalloc_socket(NULL, sizeof(*priv),
+						  RTE_CACHE_LINE_SIZE,
+						  SOCKET_ID_ANY);
+			if (!priv) {
+				ret = -ENOMEM;
+				goto failed;
+			}
+
+			snprintf(name, sizeof(name), "%s_port%d",
+				 pci_dev->device.name, port);
+
+			if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+				int fd;
+
+				eth_dev = rte_eth_dev_attach_secondary(name);
+				if (!eth_dev) {
+					DRV_LOG(ERR, "Can't attach to dev %s",
+						name);
+					ret = -ENOMEM;
+					goto failed;
+				}
+
+				eth_dev->device = &pci_dev->device;
+				eth_dev->dev_ops = &mana_dev_secondary_ops;
+				ret = mana_proc_priv_init(eth_dev);
+				if (ret)
+					goto failed;
+				priv->process_priv = eth_dev->process_private;
+
+				/* Get the IB FD from the primary process */
+				fd = mana_mp_req_verbs_cmd_fd(eth_dev);
+				if (fd < 0) {
+					DRV_LOG(ERR, "Failed to get FD %d", fd);
+					ret = -ENODEV;
+					goto failed;
+				}
+
+				ret = mana_map_doorbell_secondary(eth_dev, fd);
+				if (ret) {
+					DRV_LOG(ERR, "Failed secondary map %d",
+						fd);
+					goto failed;
+				}
+
+				/* fd is no not used after mapping doorbell */
+				close(fd);
+
+				rte_spinlock_lock(&mana_shared_data->lock);
+				mana_shared_data->secondary_cnt++;
+				mana_local_data.secondary_cnt++;
+				rte_spinlock_unlock(&mana_shared_data->lock);
+
+				rte_eth_copy_pci_info(eth_dev, pci_dev);
+				rte_eth_dev_probing_finish(eth_dev);
+
+				/* Impossible to have more than one port
+				 * matching a MAC address
+				 */
+				continue;
+			}
+
+			eth_dev = rte_eth_dev_allocate(name);
+			if (!eth_dev) {
+				ret = -ENOMEM;
+				goto failed;
+			}
+
+			eth_dev->data->mac_addrs =
+				rte_calloc("mana_mac", 1,
+					   sizeof(struct rte_ether_addr), 0);
+			if (!eth_dev->data->mac_addrs) {
+				ret = -ENOMEM;
+				goto failed;
+			}
+
+			rte_ether_addr_copy(&addr, eth_dev->data->mac_addrs);
+
+			priv->ib_pd = ibv_alloc_pd(ctx);
+			if (!priv->ib_pd) {
+				DRV_LOG(ERR, "ibv_alloc_pd failed port %d", port);
+				ret = -ENOMEM;
+				goto failed;
+			}
+
+			/* Create a parent domain with the port number */
+			attr.pd = priv->ib_pd;
+			attr.comp_mask = IBV_PARENT_DOMAIN_INIT_ATTR_PD_CONTEXT;
+			attr.pd_context = (void *)(uint64_t)port;
+			priv->ib_parent_pd = ibv_alloc_parent_domain(ctx, &attr);
+			if (!priv->ib_parent_pd) {
+				DRV_LOG(ERR,
+					"ibv_alloc_parent_domain failed port %d",
+					port);
+				ret = -ENOMEM;
+				goto failed;
+			}
+
+			priv->ib_ctx = ctx;
+			priv->port_id = eth_dev->data->port_id;
+			priv->dev_port = port;
+			eth_dev->data->dev_private = priv;
+			priv->dev_data = eth_dev->data;
+
+			priv->max_rx_queues = dev_attr.orig_attr.max_qp;
+			priv->max_tx_queues = dev_attr.orig_attr.max_qp;
+
+			priv->max_rx_desc =
+				RTE_MIN(dev_attr.orig_attr.max_qp_wr,
+					dev_attr.orig_attr.max_cqe);
+			priv->max_tx_desc =
+				RTE_MIN(dev_attr.orig_attr.max_qp_wr,
+					dev_attr.orig_attr.max_cqe);
+
+			priv->max_send_sge = dev_attr.orig_attr.max_sge;
+			priv->max_recv_sge = dev_attr.orig_attr.max_sge;
+
+			priv->max_mr = dev_attr.orig_attr.max_mr;
+			priv->max_mr_size = dev_attr.orig_attr.max_mr_size;
+
+			DRV_LOG(INFO, "dev %s max queues %d desc %d sge %d",
+				name, priv->max_rx_queues, priv->max_rx_desc,
+				priv->max_send_sge);
+
+			rte_spinlock_lock(&mana_shared_data->lock);
+			mana_shared_data->primary_cnt++;
+			rte_spinlock_unlock(&mana_shared_data->lock);
+
+			eth_dev->data->dev_flags |= RTE_ETH_DEV_INTR_RMV;
+
+			eth_dev->device = &pci_dev->device;
+
+			DRV_LOG(INFO, "device %s at port %u",
+				name, eth_dev->data->port_id);
+
+			eth_dev->rx_pkt_burst = mana_rx_burst_removed;
+			eth_dev->tx_pkt_burst = mana_tx_burst_removed;
+			eth_dev->dev_ops = &mana_dev_ops;
+
+			rte_eth_copy_pci_info(eth_dev, pci_dev);
+			rte_eth_dev_probing_finish(eth_dev);
+		}
+
+		/* Secondary process doesn't need an ibv_ctx. It maps the
+		 * doorbell pages using the IB cmd_fd passed from the primary
+		 * process and send messages to primary process for memory
+		 * registartions.
+		 */
+		if (!found_port || rte_eal_process_type() == RTE_PROC_SECONDARY)
+			ibv_close_device(ctx);
+	}
+
+	ibv_free_device_list(ibv_list);
+	return 0;
+
+failed:
+	/* Free the resource for the port failed */
+	if (priv) {
+		if (priv->ib_parent_pd)
+			ibv_dealloc_pd(priv->ib_parent_pd);
+
+		if (priv->ib_pd)
+			ibv_dealloc_pd(priv->ib_pd);
+	}
+
+	if (eth_dev)
+		rte_eth_dev_release_port(eth_dev);
+
+	rte_free(priv);
+
+	ibv_close_device(ctx);
+	ibv_free_device_list(ibv_list);
+
+	return ret;
+}
+
+/*
+ * Main callback function from PCI bus to probe a device.
+ */
+static int
+mana_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+	       struct rte_pci_device *pci_dev)
+{
+	struct rte_devargs *args = pci_dev->device.devargs;
+	struct mana_conf conf = {0};
+	unsigned int i;
+	int ret;
+
+	if (args && args->drv_str) {
+		ret = mana_parse_args(args, &conf);
+		if (ret) {
+			DRV_LOG(ERR, "failed to parse parameters args = %s",
+				args->drv_str);
+			return ret;
+		}
+	}
+
+	ret = mana_init_once();
+	if (ret) {
+		DRV_LOG(ERR, "Failed to init PMD global data %d", ret);
+		return ret;
+	}
+
+	/* If there are no driver parameters, probe on all ports */
+	if (!conf.index)
+		return mana_pci_probe_mac(pci_dev, NULL);
+
+	for (i = 0; i < conf.index; i++) {
+		ret = mana_pci_probe_mac(pci_dev, &conf.mac_array[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int
+mana_dev_uninit(struct rte_eth_dev *dev)
+{
+	RTE_SET_USED(dev);
+	return 0;
+}
+
+/*
+ * Callback from PCI to remove this device.
+ */
+static int
+mana_pci_remove(struct rte_pci_device *pci_dev)
+{
+	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+		rte_spinlock_lock(&mana_shared_data_lock);
+
+		rte_spinlock_lock(&mana_shared_data->lock);
+
+		RTE_VERIFY(mana_shared_data->primary_cnt > 0);
+		mana_shared_data->primary_cnt--;
+		if (!mana_shared_data->primary_cnt) {
+			DRV_LOG(DEBUG, "mp uninit primary");
+			mana_mp_uninit_primary();
+		}
+
+		rte_spinlock_unlock(&mana_shared_data->lock);
+
+		/* Also free the shared memory if this is the last */
+		if (!mana_shared_data->primary_cnt) {
+			DRV_LOG(DEBUG, "free shared memezone data");
+			rte_memzone_free(mana_shared_mz);
+		}
+
+		rte_spinlock_unlock(&mana_shared_data_lock);
+	} else {
+		rte_spinlock_lock(&mana_shared_data_lock);
+
+		rte_spinlock_lock(&mana_shared_data->lock);
+		RTE_VERIFY(mana_shared_data->secondary_cnt > 0);
+		mana_shared_data->secondary_cnt--;
+		rte_spinlock_unlock(&mana_shared_data->lock);
+
+		RTE_VERIFY(mana_local_data.secondary_cnt > 0);
+		mana_local_data.secondary_cnt--;
+		if (!mana_local_data.secondary_cnt) {
+			DRV_LOG(DEBUG, "mp uninit secondary");
+			mana_mp_uninit_secondary();
+		}
+
+		rte_spinlock_unlock(&mana_shared_data_lock);
+	}
+
+	return rte_eth_dev_pci_generic_remove(pci_dev, mana_dev_uninit);
+}
+
+static const struct rte_pci_id mana_pci_id_map[] = {
+	{
+		RTE_PCI_DEVICE(PCI_VENDOR_ID_MICROSOFT,
+			       PCI_DEVICE_ID_MICROSOFT_MANA)
+	},
+	{
+		.vendor_id = 0
+	},
+};
+
+static struct rte_pci_driver mana_pci_driver = {
+	.id_table = mana_pci_id_map,
+	.probe = mana_pci_probe,
+	.remove = mana_pci_remove,
+	.drv_flags = RTE_PCI_DRV_INTR_RMV,
+};
+
+RTE_PMD_REGISTER_PCI(net_mana, mana_pci_driver);
+RTE_PMD_REGISTER_PCI_TABLE(net_mana, mana_pci_id_map);
+RTE_PMD_REGISTER_KMOD_DEP(net_mana, "* ib_uverbs & mana_ib");
+RTE_LOG_REGISTER_SUFFIX(mana_logtype_init, init, NOTICE);
+RTE_LOG_REGISTER_SUFFIX(mana_logtype_driver, driver, NOTICE);
diff --git a/drivers/net/mana/mana.h b/drivers/net/mana/mana.h
new file mode 100644
index 0000000000..a2021ceb4a
--- /dev/null
+++ b/drivers/net/mana/mana.h
@@ -0,0 +1,102 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2022 Microsoft Corporation
+ */
+
+#ifndef __MANA_H__
+#define __MANA_H__
+
+enum {
+	PCI_VENDOR_ID_MICROSOFT = 0x1414,
+};
+
+enum {
+	PCI_DEVICE_ID_MICROSOFT_MANA = 0x00ba,
+};
+
+/* Shared data between primary/secondary processes */
+struct mana_shared_data {
+	rte_spinlock_t lock;
+	int init_done;
+	unsigned int primary_cnt;
+	unsigned int secondary_cnt;
+};
+
+struct mana_process_priv {
+	void *db_page;
+};
+
+struct mana_priv {
+	struct rte_eth_dev_data *dev_data;
+	struct mana_process_priv *process_priv;
+
+	/* DPDK port */
+	uint16_t port_id;
+
+	/* IB device port */
+	uint8_t dev_port;
+
+	struct ibv_context *ib_ctx;
+	struct ibv_pd *ib_pd;
+	struct ibv_pd *ib_parent_pd;
+	void *db_page;
+	int max_rx_queues;
+	int max_tx_queues;
+	int max_rx_desc;
+	int max_tx_desc;
+	int max_send_sge;
+	int max_recv_sge;
+	int max_mr;
+	uint64_t max_mr_size;
+};
+
+extern int mana_logtype_driver;
+extern int mana_logtype_init;
+
+#define DRV_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, mana_logtype_driver, "%s(): " fmt "\n", \
+		__func__, ## args)
+
+#define PMD_INIT_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, mana_logtype_init, "%s(): " fmt "\n",\
+		__func__, ## args)
+
+#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
+
+uint16_t mana_rx_burst_removed(void *dpdk_rxq, struct rte_mbuf **pkts,
+			       uint16_t pkts_n);
+
+uint16_t mana_tx_burst_removed(void *dpdk_rxq, struct rte_mbuf **pkts,
+			       uint16_t pkts_n);
+
+/** Request timeout for IPC. */
+#define MANA_MP_REQ_TIMEOUT_SEC 5
+
+/* Request types for IPC. */
+enum mana_mp_req_type {
+	MANA_MP_REQ_VERBS_CMD_FD = 1,
+	MANA_MP_REQ_CREATE_MR,
+	MANA_MP_REQ_START_RXTX,
+	MANA_MP_REQ_STOP_RXTX,
+};
+
+/* Pameters for IPC. */
+struct mana_mp_param {
+	enum mana_mp_req_type type;
+	int port_id;
+	int result;
+
+	/* MANA_MP_REQ_CREATE_MR */
+	uintptr_t addr;
+	uint32_t len;
+};
+
+#define MANA_MP_NAME	"net_mana_mp"
+int mana_mp_init_primary(void);
+int mana_mp_init_secondary(void);
+void mana_mp_uninit_primary(void);
+void mana_mp_uninit_secondary(void);
+int mana_mp_req_verbs_cmd_fd(struct rte_eth_dev *dev);
+
+void mana_mp_req_on_rxtx(struct rte_eth_dev *dev, enum mana_mp_req_type type);
+
+#endif
diff --git a/drivers/net/mana/meson.build b/drivers/net/mana/meson.build
new file mode 100644
index 0000000000..ae6beda5e0
--- /dev/null
+++ b/drivers/net/mana/meson.build
@@ -0,0 +1,44 @@ 
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2022 Microsoft Corporation
+
+if not is_linux or not dpdk_conf.has('RTE_ARCH_X86_64')
+    build = false
+    reason = 'mana is supported on Linux X86_64'
+    subdir_done()
+endif
+
+deps += ['pci', 'bus_pci', 'net', 'eal', 'kvargs']
+
+sources += files(
+        'mana.c',
+        'mp.c',
+)
+
+libnames = ['ibverbs', 'mana' ]
+foreach libname:libnames
+    lib = cc.find_library(libname, required:false)
+    if lib.found()
+        ext_deps += lib
+    else
+        build = false
+        reason = 'missing dependency, "' + libname + '"'
+        subdir_done()
+    endif
+endforeach
+
+required_symbols = [
+    ['infiniband/manadv.h', 'manadv_set_context_attr'],
+    ['infiniband/manadv.h', 'manadv_init_obj'],
+    ['infiniband/manadv.h', 'MANADV_CTX_ATTR_BUF_ALLOCATORS'],
+    ['infiniband/manadv.h', 'MANADV_OBJ_QP'],
+    ['infiniband/manadv.h', 'MANADV_OBJ_CQ'],
+    ['infiniband/manadv.h', 'MANADV_OBJ_RWQ'],
+]
+
+foreach arg:required_symbols
+    if not cc.has_header_symbol(arg[0], arg[1])
+        build = false
+        reason = 'missing symbol "' + arg[1] + '" in "' + arg[0] + '"'
+        subdir_done()
+    endif
+endforeach
diff --git a/drivers/net/mana/mp.c b/drivers/net/mana/mp.c
new file mode 100644
index 0000000000..4a3826755c
--- /dev/null
+++ b/drivers/net/mana/mp.c
@@ -0,0 +1,241 @@ 
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2022 Microsoft Corporation
+ */
+
+#include <rte_malloc.h>
+#include <ethdev_driver.h>
+#include <rte_log.h>
+
+#include <infiniband/verbs.h>
+
+#include "mana.h"
+
+extern struct mana_shared_data *mana_shared_data;
+
+static void
+mp_init_msg(struct rte_mp_msg *msg, enum mana_mp_req_type type, int port_id)
+{
+	struct mana_mp_param *param;
+
+	strlcpy(msg->name, MANA_MP_NAME, sizeof(msg->name));
+	msg->len_param = sizeof(*param);
+
+	param = (struct mana_mp_param *)msg->param;
+	param->type = type;
+	param->port_id = port_id;
+}
+
+static int
+mana_mp_primary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
+{
+	struct rte_eth_dev *dev;
+	const struct mana_mp_param *param =
+		(const struct mana_mp_param *)mp_msg->param;
+	struct rte_mp_msg mp_res = { 0 };
+	struct mana_mp_param *res = (struct mana_mp_param *)mp_res.param;
+	int ret;
+	struct mana_priv *priv;
+
+	if (!rte_eth_dev_is_valid_port(param->port_id)) {
+		DRV_LOG(ERR, "MP handle port ID %u invalid", param->port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[param->port_id];
+	priv = dev->data->dev_private;
+
+	mp_init_msg(&mp_res, param->type, param->port_id);
+
+	switch (param->type) {
+	case MANA_MP_REQ_VERBS_CMD_FD:
+		mp_res.num_fds = 1;
+		mp_res.fds[0] = priv->ib_ctx->cmd_fd;
+		res->result = 0;
+		ret = rte_mp_reply(&mp_res, peer);
+		break;
+
+	default:
+		DRV_LOG(ERR, "Port %u unknown primary MP type %u",
+			param->port_id, param->type);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int
+mana_mp_secondary_handle(const struct rte_mp_msg *mp_msg, const void *peer)
+{
+	struct rte_mp_msg mp_res = { 0 };
+	struct mana_mp_param *res = (struct mana_mp_param *)mp_res.param;
+	const struct mana_mp_param *param =
+		(const struct mana_mp_param *)mp_msg->param;
+	struct rte_eth_dev *dev;
+	int ret;
+
+	if (!rte_eth_dev_is_valid_port(param->port_id)) {
+		DRV_LOG(ERR, "MP handle port ID %u invalid", param->port_id);
+		return -ENODEV;
+	}
+
+	dev = &rte_eth_devices[param->port_id];
+
+	mp_init_msg(&mp_res, param->type, param->port_id);
+
+	switch (param->type) {
+	case MANA_MP_REQ_START_RXTX:
+		DRV_LOG(INFO, "Port %u starting datapath", dev->data->port_id);
+
+		rte_mb();
+
+		res->result = 0;
+		ret = rte_mp_reply(&mp_res, peer);
+		break;
+
+	case MANA_MP_REQ_STOP_RXTX:
+		DRV_LOG(INFO, "Port %u stopping datapath", dev->data->port_id);
+
+		dev->tx_pkt_burst = mana_tx_burst_removed;
+		dev->rx_pkt_burst = mana_rx_burst_removed;
+
+		rte_mb();
+
+		res->result = 0;
+		ret = rte_mp_reply(&mp_res, peer);
+		break;
+
+	default:
+		DRV_LOG(ERR, "Port %u unknown secondary MP type %u",
+			param->port_id, param->type);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+int
+mana_mp_init_primary(void)
+{
+	int ret;
+
+	ret = rte_mp_action_register(MANA_MP_NAME, mana_mp_primary_handle);
+	if (ret && rte_errno != ENOTSUP) {
+		DRV_LOG(ERR, "Failed to register primary handler %d %d",
+			ret, rte_errno);
+		return -1;
+	}
+
+	return 0;
+}
+
+void
+mana_mp_uninit_primary(void)
+{
+	rte_mp_action_unregister(MANA_MP_NAME);
+}
+
+int
+mana_mp_init_secondary(void)
+{
+	return rte_mp_action_register(MANA_MP_NAME, mana_mp_secondary_handle);
+}
+
+void
+mana_mp_uninit_secondary(void)
+{
+	rte_mp_action_unregister(MANA_MP_NAME);
+}
+
+int
+mana_mp_req_verbs_cmd_fd(struct rte_eth_dev *dev)
+{
+	struct rte_mp_msg mp_req = { 0 };
+	struct rte_mp_msg *mp_res;
+	struct rte_mp_reply mp_rep;
+	struct mana_mp_param *res;
+	struct timespec ts = {.tv_sec = MANA_MP_REQ_TIMEOUT_SEC, .tv_nsec = 0};
+	int ret;
+
+	mp_init_msg(&mp_req, MANA_MP_REQ_VERBS_CMD_FD, dev->data->port_id);
+
+	ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
+	if (ret) {
+		DRV_LOG(ERR, "port %u request to primary process failed",
+			dev->data->port_id);
+		return ret;
+	}
+
+	if (mp_rep.nb_received != 1) {
+		DRV_LOG(ERR, "primary replied %u messages", mp_rep.nb_received);
+		ret = -EPROTO;
+		goto exit;
+	}
+
+	mp_res = &mp_rep.msgs[0];
+	res = (struct mana_mp_param *)mp_res->param;
+	if (res->result) {
+		DRV_LOG(ERR, "failed to get CMD FD, port %u",
+			dev->data->port_id);
+		ret = res->result;
+		goto exit;
+	}
+
+	if (mp_res->num_fds != 1) {
+		DRV_LOG(ERR, "got FDs %d unexpected", mp_res->num_fds);
+		ret = -EPROTO;
+		goto exit;
+	}
+
+	ret = mp_res->fds[0];
+	DRV_LOG(ERR, "port %u command FD from primary is %d",
+		dev->data->port_id, ret);
+exit:
+	free(mp_rep.msgs);
+	return ret;
+}
+
+void
+mana_mp_req_on_rxtx(struct rte_eth_dev *dev, enum mana_mp_req_type type)
+{
+	struct rte_mp_msg mp_req = { 0 };
+	struct rte_mp_msg *mp_res;
+	struct rte_mp_reply mp_rep;
+	struct mana_mp_param *res;
+	struct timespec ts = {.tv_sec = MANA_MP_REQ_TIMEOUT_SEC, .tv_nsec = 0};
+	int i, ret;
+
+	if (type != MANA_MP_REQ_START_RXTX && type != MANA_MP_REQ_STOP_RXTX) {
+		DRV_LOG(ERR, "port %u unknown request (req_type %d)",
+			dev->data->port_id, type);
+		return;
+	}
+
+	if (!mana_shared_data->secondary_cnt)
+		return;
+
+	mp_init_msg(&mp_req, type, dev->data->port_id);
+
+	ret = rte_mp_request_sync(&mp_req, &mp_rep, &ts);
+	if (ret) {
+		if (rte_errno != ENOTSUP)
+			DRV_LOG(ERR, "port %u failed to request Rx/Tx (%d)",
+				dev->data->port_id, type);
+		goto exit;
+	}
+	if (mp_rep.nb_sent != mp_rep.nb_received) {
+		DRV_LOG(ERR, "port %u not all secondaries responded (%d)",
+			dev->data->port_id, type);
+		goto exit;
+	}
+	for (i = 0; i < mp_rep.nb_received; i++) {
+		mp_res = &mp_rep.msgs[i];
+		res = (struct mana_mp_param *)mp_res->param;
+		if (res->result) {
+			DRV_LOG(ERR, "port %u request failed on secondary %d",
+				dev->data->port_id, i);
+			goto exit;
+		}
+	}
+exit:
+	free(mp_rep.msgs);
+}
diff --git a/drivers/net/mana/version.map b/drivers/net/mana/version.map
new file mode 100644
index 0000000000..78c3585d7c
--- /dev/null
+++ b/drivers/net/mana/version.map
@@ -0,0 +1,3 @@ 
+DPDK_23 {
+	local: *;
+};
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index 2355d1cde8..0b111a6ebb 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -34,6 +34,7 @@  drivers = [
         'ixgbe',
         'kni',
         'liquidio',
+        'mana',
         'memif',
         'mlx4',
         'mlx5',