diff mbox series

[v2,5/8] doc: update examples output in FreeBSD GSG

Message ID 20191125145559.29251-6-bruce.richardson@intel.com (mailing list archive)
State Superseded, archived
Delegated to: Thomas Monjalon
Headers
Series GSG Documentation updates |

Checks

Context Check Description
ci/checkpatch success coding style OK
ci/Intel-compilation success Compilation OK

Commit Message

Bruce Richardson Nov. 25, 2019, 2:55 p.m. UTC 
  The output of running the helloworld example on FreeBSD was a little
out-of-date and can be shortened by using the latest version of DPDK.
Update appropriately.

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
 doc/guides/freebsd_gsg/install_from_ports.rst | 56 ++++++++-----------
 1 file changed, 22 insertions(+), 34 deletions(-)

Comments

Anatoly Burakov Nov. 27, 2019, 12:11 p.m. UTC | #1 
On 25-Nov-19 2:55 PM, Bruce Richardson wrote:
> The output of running the helloworld example on FreeBSD was a little
> out-of-date and can be shortened by using the latest version of DPDK.
> Update appropriately.
> 
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> ---
>   doc/guides/freebsd_gsg/install_from_ports.rst | 56 ++++++++-----------
>   1 file changed, 22 insertions(+), 34 deletions(-)
> 
> diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst
> index 4b0447584..29f16cc6c 100644
> --- a/doc/guides/freebsd_gsg/install_from_ports.rst
> +++ b/doc/guides/freebsd_gsg/install_from_ports.rst
> @@ -84,48 +84,36 @@ compiled and run as below:
>         INSTALL-APP helloworld
>         INSTALL-MAP helloworld.map
>   
> -    sudo ./build/helloworld -l 0-3 -n 2
> -
> -    EAL: Contigmem driver has 2 buffers, each of size 1GB
> +    sudo ./build//helloworld -l 0-3
>       EAL: Sysctl reports 8 cpus
> -    EAL: Detected lcore 0
> -    EAL: Detected lcore 1
> -    EAL: Detected lcore 2
> -    EAL: Detected lcore 3
> -    EAL: Support maximum 64 logical core(s) by configuration.
> -    EAL: Detected 4 lcore(s)
> -    EAL: Setting up physically contiguous memory...
> -    EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
> -    EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
> -    EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
> -         is not available - clock timings may be less accurate.
> -    EAL: TSC frequency is ~3569023 KHz
> -    EAL: PCI scan found 24 devices
> -    EAL: Master core 0 is ready (tid=0x802006400)
> -    EAL: Core 1 is ready (tid=0x802006800)
> -    EAL: Core 3 is ready (tid=0x802007000)
> -    EAL: Core 2 is ready (tid=0x802006c00)
> +    EAL: Detected 8 lcore(s)
> +    EAL: Detected 1 NUMA nodes
> +    EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> +    EAL: Selected IOVA mode 'PA'
> +    EAL: Contigmem driver has 2 buffers, each of size 1GB
> +    EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x180000000, len 1073741824
> +    EAL: Mapped memory segment 1 @ 0x1080000000: physaddr:0x1c0000000, len 1073741824
> +    EAL: PCI device 0000:00:19.0 on NUMA socket 0
> +    EAL:   probe driver: 8086:153b net_e1000_em
> +    EAL:   0000:00:19.0 not managed by UIO driver, skipping
>       EAL: PCI device 0000:01:00.0 on NUMA socket 0
> -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> -    EAL:   PCI memory mapped at 0x80074a000
> -    EAL:   PCI memory mapped at 0x8007ca000
> +    EAL:   probe driver: 8086:1572 net_i40e
> +    EAL:   0000:01:00.0 not managed by UIO driver, skipping
>       EAL: PCI device 0000:01:00.1 on NUMA socket 0
> -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> -    EAL:   PCI memory mapped at 0x8007ce000
> -    EAL:   PCI memory mapped at 0x80084e000
> -    EAL: PCI device 0000:02:00.0 on NUMA socket 0
> -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> -    EAL:   PCI memory mapped at 0x800852000
> -    EAL:   PCI memory mapped at 0x8008d2000
> -    EAL: PCI device 0000:02:00.1 on NUMA socket 0
> -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> -    EAL:   PCI memory mapped at 0x801b3f000
> -    EAL:   PCI memory mapped at 0x8008d6000
> +    EAL:   probe driver: 8086:1572 net_i40e
> +    EAL:   0000:01:00.1 not managed by UIO driver, skipping
> +    EAL: PCI device 0000:01:00.2 on NUMA socket 0
> +    EAL:   probe driver: 8086:1572 net_i40e
> +    EAL:   0000:01:00.2 not managed by UIO driver, skipping
> +    EAL: PCI device 0000:01:00.3 on NUMA socket 0
> +    EAL:   probe driver: 8086:1572 net_i40e
> +    EAL:   0000:01:00.3 not managed by UIO driver, skipping
>       hello from core 1
>       hello from core 2
>       hello from core 3
>       hello from core 0
>   
> +
>   .. note::

Accidental whitespace?

>   
>      To run a DPDK process as a non-root user, adjust the permissions on
> 

Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Bruce Richardson Nov. 27, 2019, 12:23 p.m. UTC | #2 
On Wed, Nov 27, 2019 at 12:11:41PM +0000, Burakov, Anatoly wrote:
> On 25-Nov-19 2:55 PM, Bruce Richardson wrote:
> > The output of running the helloworld example on FreeBSD was a little
> > out-of-date and can be shortened by using the latest version of DPDK.
> > Update appropriately.
> > 
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> > ---
> >   doc/guides/freebsd_gsg/install_from_ports.rst | 56 ++++++++-----------
> >   1 file changed, 22 insertions(+), 34 deletions(-)
> > 
> > diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst
> > index 4b0447584..29f16cc6c 100644
> > --- a/doc/guides/freebsd_gsg/install_from_ports.rst
> > +++ b/doc/guides/freebsd_gsg/install_from_ports.rst
> > @@ -84,48 +84,36 @@ compiled and run as below:
> >         INSTALL-APP helloworld
> >         INSTALL-MAP helloworld.map
> > -    sudo ./build/helloworld -l 0-3 -n 2
> > -
> > -    EAL: Contigmem driver has 2 buffers, each of size 1GB
> > +    sudo ./build//helloworld -l 0-3
> >       EAL: Sysctl reports 8 cpus
> > -    EAL: Detected lcore 0
> > -    EAL: Detected lcore 1
> > -    EAL: Detected lcore 2
> > -    EAL: Detected lcore 3
> > -    EAL: Support maximum 64 logical core(s) by configuration.
> > -    EAL: Detected 4 lcore(s)
> > -    EAL: Setting up physically contiguous memory...
> > -    EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
> > -    EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
> > -    EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
> > -         is not available - clock timings may be less accurate.
> > -    EAL: TSC frequency is ~3569023 KHz
> > -    EAL: PCI scan found 24 devices
> > -    EAL: Master core 0 is ready (tid=0x802006400)
> > -    EAL: Core 1 is ready (tid=0x802006800)
> > -    EAL: Core 3 is ready (tid=0x802007000)
> > -    EAL: Core 2 is ready (tid=0x802006c00)
> > +    EAL: Detected 8 lcore(s)
> > +    EAL: Detected 1 NUMA nodes
> > +    EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> > +    EAL: Selected IOVA mode 'PA'
> > +    EAL: Contigmem driver has 2 buffers, each of size 1GB
> > +    EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x180000000, len 1073741824
> > +    EAL: Mapped memory segment 1 @ 0x1080000000: physaddr:0x1c0000000, len 1073741824
> > +    EAL: PCI device 0000:00:19.0 on NUMA socket 0
> > +    EAL:   probe driver: 8086:153b net_e1000_em
> > +    EAL:   0000:00:19.0 not managed by UIO driver, skipping
> >       EAL: PCI device 0000:01:00.0 on NUMA socket 0
> > -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> > -    EAL:   PCI memory mapped at 0x80074a000
> > -    EAL:   PCI memory mapped at 0x8007ca000
> > +    EAL:   probe driver: 8086:1572 net_i40e
> > +    EAL:   0000:01:00.0 not managed by UIO driver, skipping
> >       EAL: PCI device 0000:01:00.1 on NUMA socket 0
> > -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> > -    EAL:   PCI memory mapped at 0x8007ce000
> > -    EAL:   PCI memory mapped at 0x80084e000
> > -    EAL: PCI device 0000:02:00.0 on NUMA socket 0
> > -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> > -    EAL:   PCI memory mapped at 0x800852000
> > -    EAL:   PCI memory mapped at 0x8008d2000
> > -    EAL: PCI device 0000:02:00.1 on NUMA socket 0
> > -    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
> > -    EAL:   PCI memory mapped at 0x801b3f000
> > -    EAL:   PCI memory mapped at 0x8008d6000
> > +    EAL:   probe driver: 8086:1572 net_i40e
> > +    EAL:   0000:01:00.1 not managed by UIO driver, skipping
> > +    EAL: PCI device 0000:01:00.2 on NUMA socket 0
> > +    EAL:   probe driver: 8086:1572 net_i40e
> > +    EAL:   0000:01:00.2 not managed by UIO driver, skipping
> > +    EAL: PCI device 0000:01:00.3 on NUMA socket 0
> > +    EAL:   probe driver: 8086:1572 net_i40e
> > +    EAL:   0000:01:00.3 not managed by UIO driver, skipping
> >       hello from core 1
> >       hello from core 2
> >       hello from core 3
> >       hello from core 0
> > +
> >   .. note::
> 
> Accidental whitespace?
> 

I don't think so. I think there needs to be a blank line before the note.
If it is extra, I suggest it just be removed on apply.

> >      To run a DPDK process as a non-root user, adjust the permissions on
> > 
> 
> Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
> 
Thanks for the review.
diff mbox series

Patch

diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst
index 4b0447584..29f16cc6c 100644
--- a/doc/guides/freebsd_gsg/install_from_ports.rst
+++ b/doc/guides/freebsd_gsg/install_from_ports.rst
@@ -84,48 +84,36 @@  compiled and run as below:
       INSTALL-APP helloworld
       INSTALL-MAP helloworld.map
 
-    sudo ./build/helloworld -l 0-3 -n 2
-
-    EAL: Contigmem driver has 2 buffers, each of size 1GB
+    sudo ./build//helloworld -l 0-3
     EAL: Sysctl reports 8 cpus
-    EAL: Detected lcore 0
-    EAL: Detected lcore 1
-    EAL: Detected lcore 2
-    EAL: Detected lcore 3
-    EAL: Support maximum 64 logical core(s) by configuration.
-    EAL: Detected 4 lcore(s)
-    EAL: Setting up physically contiguous memory...
-    EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
-    EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
-    EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
-         is not available - clock timings may be less accurate.
-    EAL: TSC frequency is ~3569023 KHz
-    EAL: PCI scan found 24 devices
-    EAL: Master core 0 is ready (tid=0x802006400)
-    EAL: Core 1 is ready (tid=0x802006800)
-    EAL: Core 3 is ready (tid=0x802007000)
-    EAL: Core 2 is ready (tid=0x802006c00)
+    EAL: Detected 8 lcore(s)
+    EAL: Detected 1 NUMA nodes
+    EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
+    EAL: Selected IOVA mode 'PA'
+    EAL: Contigmem driver has 2 buffers, each of size 1GB
+    EAL: Mapped memory segment 0 @ 0x1040000000: physaddr:0x180000000, len 1073741824
+    EAL: Mapped memory segment 1 @ 0x1080000000: physaddr:0x1c0000000, len 1073741824
+    EAL: PCI device 0000:00:19.0 on NUMA socket 0
+    EAL:   probe driver: 8086:153b net_e1000_em
+    EAL:   0000:00:19.0 not managed by UIO driver, skipping
     EAL: PCI device 0000:01:00.0 on NUMA socket 0
-    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
-    EAL:   PCI memory mapped at 0x80074a000
-    EAL:   PCI memory mapped at 0x8007ca000
+    EAL:   probe driver: 8086:1572 net_i40e
+    EAL:   0000:01:00.0 not managed by UIO driver, skipping
     EAL: PCI device 0000:01:00.1 on NUMA socket 0
-    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
-    EAL:   PCI memory mapped at 0x8007ce000
-    EAL:   PCI memory mapped at 0x80084e000
-    EAL: PCI device 0000:02:00.0 on NUMA socket 0
-    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
-    EAL:   PCI memory mapped at 0x800852000
-    EAL:   PCI memory mapped at 0x8008d2000
-    EAL: PCI device 0000:02:00.1 on NUMA socket 0
-    EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
-    EAL:   PCI memory mapped at 0x801b3f000
-    EAL:   PCI memory mapped at 0x8008d6000
+    EAL:   probe driver: 8086:1572 net_i40e
+    EAL:   0000:01:00.1 not managed by UIO driver, skipping
+    EAL: PCI device 0000:01:00.2 on NUMA socket 0
+    EAL:   probe driver: 8086:1572 net_i40e
+    EAL:   0000:01:00.2 not managed by UIO driver, skipping
+    EAL: PCI device 0000:01:00.3 on NUMA socket 0
+    EAL:   probe driver: 8086:1572 net_i40e
+    EAL:   0000:01:00.3 not managed by UIO driver, skipping
     hello from core 1
     hello from core 2
     hello from core 3
     hello from core 0
 
+
 .. note::
 
    To run a DPDK process as a non-root user, adjust the permissions on