@@ -1391,7 +1391,7 @@ rte_eth_linkstatus_get(const struct rte_eth_dev *dev,
*
* A pool of switch domain identifiers which can be allocated on request. This
* will enabled devices which support the concept of switch domains to request
- * a switch domain id which is guaranteed to be unique from other devices
+ * a switch domain ID which is guaranteed to be unique from other devices
* running in the same process.
*
* @param domain_id
@@ -10,7 +10,7 @@
#include "rte_ethdev.h"
/*
- * Convert rte_eth_dev pointer to port id.
+ * Convert rte_eth_dev pointer to port ID.
* NULL will be translated to RTE_MAX_ETHPORTS.
*/
uint16_t eth_dev_to_id(const struct rte_eth_dev *dev);
@@ -90,7 +90,7 @@ eth_representor_cmp(const char *key __rte_unused,
np = eth_da.nb_ports > 0 ? eth_da.nb_ports : 1;
nf = eth_da.nb_representor_ports > 0 ? eth_da.nb_representor_ports : 1;
- /* Return 0 if representor id is matching one of the values. */
+ /* Return 0 if representor ID is matching one of the values. */
for (i = 0; i < nc * np * nf; ++i) {
c = i / (np * nf);
p = (i / nf) % np;
@@ -538,7 +538,7 @@ rte_eth_dev_allocate(const char *name)
/*
* Attach to a port already registered by the primary process, which
- * makes sure that the same device would have the same port id both
+ * makes sure that the same device would have the same port ID both
* in the primary and secondary process.
*/
struct rte_eth_dev *
@@ -668,7 +668,7 @@ eth_dev_owner_set(const uint16_t port_id, const uint64_t old_owner_id,
struct rte_eth_dev_owner *port_owner;
if (port_id >= RTE_MAX_ETHPORTS || !eth_dev_is_allocated(ethdev)) {
- RTE_ETHDEV_LOG(ERR, "Port id %"PRIu16" is not allocated\n",
+ RTE_ETHDEV_LOG(ERR, "Port ID %"PRIu16" is not allocated\n",
port_id);
return -ENODEV;
}
@@ -760,7 +760,7 @@ rte_eth_dev_owner_delete(const uint64_t owner_id)
owner_id);
} else {
RTE_ETHDEV_LOG(ERR,
- "Invalid owner id=%016"PRIx64"\n",
+ "Invalid owner ID=%016"PRIx64"\n",
owner_id);
ret = -EINVAL;
}
@@ -779,7 +779,7 @@ rte_eth_dev_owner_get(const uint16_t port_id, struct rte_eth_dev_owner *owner)
ethdev = &rte_eth_devices[port_id];
if (!eth_dev_is_allocated(ethdev)) {
- RTE_ETHDEV_LOG(ERR, "Port id %"PRIu16" is not allocated\n",
+ RTE_ETHDEV_LOG(ERR, "Port ID %"PRIu16" is not allocated\n",
port_id);
return -ENODEV;
}
@@ -4327,7 +4327,7 @@ rte_eth_dev_mac_addr_add(uint16_t port_id, struct rte_ether_addr *addr,
return -EINVAL;
}
if (pool >= ETH_64_POOLS) {
- RTE_ETHDEV_LOG(ERR, "Pool id must be 0-%d\n", ETH_64_POOLS - 1);
+ RTE_ETHDEV_LOG(ERR, "Pool ID must be 0-%d\n", ETH_64_POOLS - 1);
return -EINVAL;
}
@@ -4552,7 +4552,7 @@ int rte_eth_set_queue_rate_limit(uint16_t port_id, uint16_t queue_idx,
if (queue_idx > dev_info.max_tx_queues) {
RTE_ETHDEV_LOG(ERR,
- "Set queue rate limit:port %u: invalid queue id=%u\n",
+ "Set queue rate limit:port %u: invalid queue ID=%u\n",
port_id, queue_idx);
return -EINVAL;
}
@@ -6409,7 +6409,7 @@ rte_eth_rx_metadata_negotiate(uint16_t port_id, uint64_t *features)
if (dev->data->dev_configured != 0) {
RTE_ETHDEV_LOG(ERR,
- "The port (id=%"PRIu16") is already configured\n",
+ "The port (ID=%"PRIu16") is already configured\n",
port_id);
return -EBUSY;
}
@@ -197,7 +197,7 @@ int rte_eth_iterator_init(struct rte_dev_iterator *iter, const char *devargs);
* Iterates on devices with devargs filter.
* The ownership is not checked.
*
- * The next port id is returned, and the iterator is updated.
+ * The next port ID is returned, and the iterator is updated.
*
* @param iter
* Device iterator handle initialized by rte_eth_iterator_init().
@@ -205,7 +205,7 @@ int rte_eth_iterator_init(struct rte_dev_iterator *iter, const char *devargs);
* by calling rte_eth_iterator_cleanup().
*
* @return
- * A port id if found, RTE_MAX_ETHPORTS otherwise.
+ * A port ID if found, RTE_MAX_ETHPORTS otherwise.
*/
uint16_t rte_eth_iterator_next(struct rte_dev_iterator *iter);
@@ -230,7 +230,7 @@ void rte_eth_iterator_cleanup(struct rte_dev_iterator *iter);
* the function rte_eth_iterator_cleanup() must be called.
*
* @param id
- * Iterated port id of type uint16_t.
+ * Iterated port ID of type uint16_t.
* @param devargs
* Device parameters input as string of type char*.
* @param iter
@@ -935,7 +935,7 @@ struct rte_eth_vmdq_dcb_conf {
* Passing the ETH_VMDQ_ACCEPT_UNTAG in the rx_mode field allows pool
* selection using only the MAC address. MAC address to pool mapping is done
* using the rte_eth_dev_mac_addr_add function, with the pool parameter
- * corresponding to the pool id.
+ * corresponding to the pool ID.
*
* Queue selection within the selected pool will be done using RSS when
* it is enabled or revert to the first queue of the pool if not.
@@ -1471,7 +1471,7 @@ struct rte_eth_dev_portconf {
};
/**
- * Default values for switch domain id when ethdev does not support switch
+ * Default values for switch domain ID when ethdev does not support switch
* domain definitions.
*/
#define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (UINT16_MAX)
@@ -1481,7 +1481,7 @@ struct rte_eth_dev_portconf {
*/
struct rte_eth_switch_info {
const char *name; /**< switch name */
- uint16_t domain_id; /**< switch domain id */
+ uint16_t domain_id; /**< switch domain ID */
/**
* Mapping to the devices physical switch port as enumerated from the
* perspective of the embedded interconnect/switch. For SR-IOV enabled
@@ -1644,7 +1644,7 @@ struct rte_eth_burst_mode {
* This structure is used by rte_eth_xstats_get() to provide
* statistics that are not provided in the generic *rte_eth_stats*
* structure.
- * It maps a name id, corresponding to an index in the array returned
+ * It maps a name ID, corresponding to an index in the array returned
* by rte_eth_xstats_get_names(), to a statistic value.
*/
struct rte_eth_xstat {
@@ -1860,12 +1860,12 @@ struct rte_eth_dev_owner {
* Iterates over valid ethdev ports owned by a specific owner.
*
* @param port_id
- * The id of the next possible valid owned port.
+ * The ID of the next possible valid owned port.
* @param owner_id
* The owner identifier.
* RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless ports.
* @return
- * Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is none.
+ * Next valid port ID owned by owner_id, RTE_MAX_ETHPORTS if there is none.
*/
uint64_t rte_eth_find_next_owned_by(uint16_t port_id,
const uint64_t owner_id);
@@ -1882,9 +1882,9 @@ uint64_t rte_eth_find_next_owned_by(uint16_t port_id,
* Iterates over valid ethdev ports.
*
* @param port_id
- * The id of the next possible valid port.
+ * The ID of the next possible valid port.
* @return
- * Next valid port id, RTE_MAX_ETHPORTS if there is none.
+ * Next valid port ID, RTE_MAX_ETHPORTS if there is none.
*/
uint16_t rte_eth_find_next(uint16_t port_id);
@@ -1898,11 +1898,11 @@ uint16_t rte_eth_find_next(uint16_t port_id);
* Iterates over ethdev ports of a specified device.
*
* @param port_id_start
- * The id of the next possible valid port.
+ * The ID of the next possible valid port.
* @param parent
* The generic device behind the ports to iterate.
* @return
- * Next port id of the device, possibly port_id_start,
+ * Next port ID of the device, possibly port_id_start,
* RTE_MAX_ETHPORTS if there is none.
*/
uint16_t
@@ -1913,7 +1913,7 @@ rte_eth_find_next_of(uint16_t port_id_start,
* Macro to iterate over all ethdev ports of a specified device.
*
* @param port_id
- * The id of the matching port being iterated.
+ * The ID of the matching port being iterated.
* @param parent
* The rte_device pointer matching the iterated ports.
*/
@@ -1926,11 +1926,11 @@ rte_eth_find_next_of(uint16_t port_id_start,
* Iterates over sibling ethdev ports (i.e. sharing the same rte_device).
*
* @param port_id_start
- * The id of the next possible valid sibling port.
+ * The ID of the next possible valid sibling port.
* @param ref_port_id
- * The id of a reference port to compare rte_device with.
+ * The ID of a reference port to compare rte_device with.
* @return
- * Next sibling port id, possibly port_id_start or ref_port_id itself,
+ * Next sibling port ID, possibly port_id_start or ref_port_id itself,
* RTE_MAX_ETHPORTS if there is none.
*/
uint16_t
@@ -1942,9 +1942,9 @@ rte_eth_find_next_sibling(uint16_t port_id_start, uint16_t ref_port_id);
* Note: the specified reference port is part of the loop iterations.
*
* @param port_id
- * The id of the matching port being iterated.
+ * The ID of the matching port being iterated.
* @param ref_port_id
- * The id of the port being compared.
+ * The ID of the port being compared.
*/
#define RTE_ETH_FOREACH_DEV_SIBLING(port_id, ref_port_id) \
for (port_id = rte_eth_find_next_sibling(0, ref_port_id); \
@@ -2413,7 +2413,7 @@ int rte_eth_hairpin_unbind(uint16_t tx_port, uint16_t rx_port);
* @param port_id
* The port identifier of the Ethernet device
* @return
- * The NUMA socket id to which the Ethernet device is connected or
+ * The NUMA socket ID to which the Ethernet device is connected or
* a default of zero if the socket could not be determined.
* -1 is returned is the port_id value is out of range.
*/
@@ -2575,7 +2575,7 @@ int rte_eth_dev_set_link_down(uint16_t port_id);
int rte_eth_dev_close(uint16_t port_id);
/**
- * Reset a Ethernet device and keep its port id.
+ * Reset a Ethernet device and keep its port ID.
*
* When a port has to be reset passively, the DPDK application can invoke
* this function. For example when a PF is reset, all its VFs should also
@@ -2586,7 +2586,7 @@ int rte_eth_dev_close(uint16_t port_id);
* When this function is called, it first stops the port and then calls the
* PMD specific dev_uninit( ) and dev_init( ) to return the port to initial
* state, in which no Tx and Rx queues are setup, as if the port has been
- * reset and not started. The port keeps the port id it had before the
+ * reset and not started. The port keeps the port ID it had before the
* function call.
*
* After calling rte_eth_dev_reset( ), the application should use
@@ -2821,7 +2821,7 @@ int rte_eth_stats_reset(uint16_t port_id);
* is too small. The return value corresponds to the size that should
* be given to succeed. The entries in the table are not valid and
* shall not be used by the caller.
- * - A negative value on error (invalid port id).
+ * - A negative value on error (invalid port ID).
*/
int rte_eth_xstats_get_names(uint16_t port_id,
struct rte_eth_xstat_name *xstats_names,
@@ -2854,7 +2854,7 @@ int rte_eth_xstats_get_names(uint16_t port_id,
* is too small. The return value corresponds to the size that should
* be given to succeed. The entries in the table are not valid and
* shall not be used by the caller.
- * - A negative value on error (invalid port id).
+ * - A negative value on error (invalid port ID).
*/
int rte_eth_xstats_get(uint16_t port_id, struct rte_eth_xstat *xstats,
unsigned int n);
@@ -3554,7 +3554,7 @@ typedef int (*rte_eth_dev_cb_fn)(uint16_t port_id,
* Register a callback function for port event.
*
* @param port_id
- * Port id.
+ * Port ID.
* RTE_ETH_ALL means register the event for all port ids.
* @param event
* Event interested.
@@ -3575,7 +3575,7 @@ int rte_eth_dev_callback_register(uint16_t port_id,
* Unregister a callback function for port event.
*
* @param port_id
- * Port id.
+ * Port ID.
* RTE_ETH_ALL means unregister the event for all port ids.
* @param event
* Event interested.
@@ -4007,7 +4007,7 @@ int rte_eth_dev_uc_all_hash_table_set(uint16_t port_id, uint8_t on);
* @param port_id
* The port identifier of the Ethernet device.
* @param queue_idx
- * The queue id.
+ * The queue ID.
* @param tx_rate
* The Tx rate in Mbps. Allocated from the total port link speed.
* @return
@@ -4709,7 +4709,7 @@ int
rte_eth_read_clock(uint16_t port_id, uint64_t *clock);
/**
-* Get the port id from device name. The device name should be specified
+* Get the port ID from device name. The device name should be specified
* as below:
* - PCIe address (Domain:Bus:Device.Function), for example- 0000:2:00.0
* - SoC device name, for example- fsl-gmac0
@@ -4727,7 +4727,7 @@ int
rte_eth_dev_get_port_by_name(const char *name, uint16_t *port_id);
/**
-* Get the device name from port id. The device name is specified as below:
+* Get the device name from port ID. The device name is specified as below:
* - PCIe address (Domain:Bus:Device.Function), for example- 0000:02:00.0
* - SoC device name, for example- fsl-gmac0
* - vdev dpdk name, for example- net_[pcap0|null0|tun0|tap0]
@@ -5105,7 +5105,7 @@ rte_eth_rx_burst(uint16_t port_id, uint16_t queue_id,
* @param port_id
* The port identifier of the Ethernet device.
* @param queue_id
- * The queue id on the specific port.
+ * The queue ID on the specific port.
* @return
* The number of used descriptors in the specific queue, or:
* - (-ENODEV) if *port_id* is invalid.
@@ -5455,7 +5455,7 @@ rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id,
*
* @param port_id
* The port identifier of the Ethernet device.
- * The value must be a valid port id.
+ * The value must be a valid port ID.
* @param queue_id
* The index of the transmit queue through which output packets must be
* sent.
@@ -2624,12 +2624,12 @@ struct rte_flow_query_age {
* Adds a counter action to a matched flow.
*
* If more than one count action is specified in a single flow rule, then each
- * action must specify a unique id.
+ * action must specify a unique ID.
*
* Counters can be retrieved and reset through ``rte_flow_query()``, see
* ``struct rte_flow_query_count``.
*
- * For ports within the same switch domain then the counter id namespace extends
+ * For ports within the same switch domain then the counter ID namespace extends
* to all ports within that switch domain.
*/
struct rte_flow_action_count {