net/igc: add I226 support
Checks
Commit Message
Added I226 Series device ID in igc driver and updated igc guide
document for new devices.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
---
doc/guides/nics/igc.rst | 14 +++++++-------
doc/guides/rel_notes/release_22_03.rst | 5 +++++
drivers/net/igc/base/igc_api.c | 6 ++++++
drivers/net/igc/base/igc_defines.h | 1 +
drivers/net/igc/base/igc_hw.h | 6 ++++++
drivers/net/igc/base/igc_i225.c | 1 +
drivers/net/igc/igc_ethdev.c | 6 ++++++
7 files changed, 32 insertions(+), 7 deletions(-)
@@ -5,11 +5,12 @@ IGC Poll Mode Driver
======================
The IGC PMD (**librte_net_igc**) provides poll mode driver support for Foxville
-I225 Series Network Adapters.
+I225 and I226 Series Network Adapters.
- For information about I225, please refer to: `Intel® Ethernet Controller I225 Series
<https://ark.intel.com/content/www/us/en/ark/products/series/184686/intel-ethernet-controller-i225-series.html>`_.
-
+- For information about I226, please refer to: `Intel® Ethernet Controller I226 Series
+ <https://ark.intel.com/content/www/us/en/ark/products/series/210588/intel-ethernet-controller-i226-series.html>`_.
Driver compilation and testing
------------------------------
@@ -21,11 +22,10 @@ for details.
Supported Chipsets and NICs
---------------------------
-Foxville LM (I225 LM): Client 2.5G LAN vPro Corporate
-Foxville V (I225 V): Client 2.5G LAN Consumer
-Foxville I (I225 I): Client 2.5G Industrial Temp
-Foxville V (I225 K): Client 2.5G LAN Consumer
-
+Foxville LM (I225 LM, I226 LM): Client 2.5G LAN vPro Corporate
+Foxville V (I225 V, I226 V): Client 2.5G LAN Consumer
+Foxville I (I225 I, I226 IM): Client 2.5G Industrial Temp
+Foxville V (I225 K, I226 K): Client 2.5G LAN Consumer
Sample Application Notes
------------------------
@@ -88,6 +88,11 @@ New Features
* Added AES-XCBC support in lookaside protocol (IPsec) for CN9K & CN10K.
* Added AES-CMAC support in CN9K & CN10K.
+* **Added support for Intel Foxville I226 devices.**
+
+ Added Intel Foxville I226 devices in ``igc`` driver. See the
+ :doc:`../nics/igc` NIC guide for more details.
+
* **Added an API to retrieve event port id of ethdev Rx adapter.**
The new API ``rte_event_eth_rx_adapter_event_port_get()`` was added.
@@ -888,6 +888,12 @@ s32 igc_set_mac_type(struct igc_hw *hw)
case IGC_DEV_ID_I225_I:
case IGC_DEV_ID_I220_V:
case IGC_DEV_ID_I225_BLANK_NVM:
+ case IGC_DEV_ID_I226_K:
+ case IGC_DEV_ID_I226_LMVP:
+ case IGC_DEV_ID_I226_LM:
+ case IGC_DEV_ID_I226_V:
+ case IGC_DEV_ID_I226_IT:
+ case IGC_DEV_ID_I226_BLANK_NVM:
mac->type = igc_i225;
break;
case IGC_DEV_ID_I350_VF:
@@ -1351,6 +1351,7 @@
#define IGP04IGC_E_PHY_ID 0x02A80391
#define M88_VENDOR 0x0141
#define I225_I_PHY_ID 0x67C9DC00
+#define I226_LM_PHY_ID 0x67C9DC10
/* M88E1000 Specific Registers */
#define M88IGC_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */
@@ -166,6 +166,12 @@ struct igc_hw;
#define IGC_DEV_ID_I225_I 0x15F8
#define IGC_DEV_ID_I220_V 0x15F7
#define IGC_DEV_ID_I225_BLANK_NVM 0x15FD
+#define IGC_DEV_ID_I226_K 0x3102
+#define IGC_DEV_ID_I226_LMVP 0x5503
+#define IGC_DEV_ID_I226_LM 0x125B
+#define IGC_DEV_ID_I226_V 0x125C
+#define IGC_DEV_ID_I226_IT 0x125D
+#define IGC_DEV_ID_I226_BLANK_NVM 0x125F
#define IGC_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40
#define IGC_DEV_ID_I354_SGMII 0x1F41
#define IGC_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45
@@ -176,6 +176,7 @@ static s32 igc_init_phy_params_i225(struct igc_hw *hw)
/* Verify phy id and set remaining function pointers */
switch (phy->id) {
case I225_I_PHY_ID:
+ case I226_LM_PHY_ID:
phy->type = igc_phy_i225;
phy->ops.set_d0_lplu_state = igc_set_d0_lplu_state_i225;
phy->ops.set_d3_lplu_state = igc_set_d3_lplu_state_i225;
@@ -97,6 +97,12 @@ static const struct rte_pci_id pci_id_igc_map[] = {
{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_V) },
{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_I) },
{ RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I225_K) },
+ { RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_K) },
+ { RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_LMVP) },
+ { RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_LM) },
+ { RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_V) },
+ { RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_IT) },
+ { RTE_PCI_DEVICE(IGC_INTEL_VENDOR_ID, IGC_DEV_ID_I226_BLANK_NVM) },
{ .vendor_id = 0, /* sentinel */ },
};