@@ -70,7 +70,6 @@ Deprecation Notices
and `refinement <http://mails.dpdk.org/archives/dev/2022-June/243596.html>`_:
* Some deprecation warnings will be added in DPDK 22.11.
- * The KNI example application will be removed from DPDK 22.11.
* The KNI kernel module, library and PMD will be removed from the DPDK 23.11.
* lib: will fix extending some enum/define breaking the ABI. There are multiple
@@ -20,7 +20,6 @@ Sample Applications User Guides
ip_frag
ipv4_multicast
ip_reassembly
- kernel_nic_interface
keep_alive
dma
l2_forward_crypto
deleted file mode 100644
@@ -1,318 +0,0 @@
-.. SPDX-License-Identifier: BSD-3-Clause
- Copyright(c) 2010-2014 Intel Corporation.
-
-Kernel NIC Interface Sample Application
-=======================================
-
-The Kernel NIC Interface (KNI) is a DPDK control plane solution that
-allows userspace applications to exchange packets with the kernel networking stack.
-To accomplish this, DPDK userspace applications use an IOCTL call
-to request the creation of a KNI virtual device in the Linux* kernel.
-The IOCTL call provides interface information and the DPDK's physical address space,
-which is re-mapped into the kernel address space by the KNI kernel loadable module
-that saves the information to a virtual device context.
-The DPDK creates FIFO queues for packet ingress and egress
-to the kernel module for each device allocated.
-
-The KNI kernel loadable module is a standard net driver,
-which upon receiving the IOCTL call access the DPDK's FIFO queue to
-receive/transmit packets from/to the DPDK userspace application.
-The FIFO queues contain pointers to data packets in the DPDK. This:
-
-* Provides a faster mechanism to interface with the kernel net stack and eliminates system calls
-
-* Facilitates the DPDK using standard Linux* userspace net tools (tshark, rsync, and so on)
-
-* Eliminate the copy_to_user and copy_from_user operations on packets.
-
-The Kernel NIC Interface sample application is a simple example that demonstrates the use
-of the DPDK to create a path for packets to go through the Linux* kernel.
-This is done by creating one or more kernel net devices for each of the DPDK ports.
-The application allows the use of standard Linux tools (ethtool, iproute, tshark) with the DPDK ports and
-also the exchange of packets between the DPDK application and the Linux* kernel.
-
-The Kernel NIC Interface sample application requires that the
-KNI kernel module ``rte_kni`` be loaded into the kernel. See
-:doc:`../prog_guide/kernel_nic_interface` for more information on loading
-the ``rte_kni`` kernel module.
-
-Overview
---------
-
-The Kernel NIC Interface sample application ``kni`` allocates one or more
-KNI interfaces for each physical NIC port. For each physical NIC port,
-``kni`` uses two DPDK threads in user space; one thread reads from the port and
-writes to the corresponding KNI interfaces and the other thread reads from
-the KNI interfaces and writes the data unmodified to the physical NIC port.
-
-It is recommended to configure one KNI interface for each physical NIC port.
-The application can be configured with more than one KNI interface for
-each physical NIC port for performance testing or it can work together with
-VMDq support in future.
-
-The packet flow through the Kernel NIC Interface application is as shown
-in the following figure.
-
-.. _figure_kernel_nic:
-
-.. figure:: img/kernel_nic.*
-
- Kernel NIC Application Packet Flow
-
-If link monitoring is enabled with the ``-m`` command line flag, one
-additional pthread is launched which will check the link status of each
-physical NIC port and will update the carrier status of the corresponding
-KNI interface(s) to match the physical NIC port's state. This means that
-the KNI interface(s) will be disabled automatically when the Ethernet link
-goes down and enabled when the Ethernet link goes up.
-
-If link monitoring is enabled, the ``rte_kni`` kernel module should be loaded
-such that the :ref:`default carrier state <kni_default_carrier_state>` is
-set to *off*. This ensures that the KNI interface is only enabled *after*
-the Ethernet link of the corresponding NIC port has reached the linkup state.
-
-If link monitoring is not enabled, the ``rte_kni`` kernel module should be
-loaded with the :ref:`default carrier state <kni_default_carrier_state>`
-set to *on*. This sets the carrier state of the KNI interfaces to *on*
-when the KNI interfaces are enabled without regard to the actual link state
-of the corresponding NIC port. This is useful for testing in loopback
-mode where the NIC port may not be physically connected to anything.
-
-Compiling the Application
--------------------------
-
-To compile the sample application see :doc:`compiling`.
-
-The application is located in the ``examples/kni`` sub-directory.
-
-.. note::
-
- This application is intended as a linux only.
-
-Running the kni Example Application
------------------------------------
-
-The ``kni`` example application requires a number of command line options:
-
-.. code-block:: console
-
- dpdk-kni [EAL options] -- -p PORTMASK --config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]" [-P] [-m]
-
-Where:
-
-* ``-p PORTMASK``:
-
- Hexadecimal bitmask of ports to configure.
-
-* ``--config="(port,lcore_rx,lcore_tx[,lcore_kthread,...])[,(port,lcore_rx,lcore_tx[,lcore_kthread,...])]"``:
-
- Determines which lcores the Rx and Tx DPDK tasks, and (optionally)
- the KNI kernel thread(s) are bound to for each physical port.
-
-* ``-P``:
-
- Optional flag to set all ports to promiscuous mode so that packets are
- accepted regardless of the packet's Ethernet MAC destination address.
- Without this option, only packets with the Ethernet MAC destination
- address set to the Ethernet address of the port are accepted.
-
-* ``-m``:
-
- Optional flag to enable monitoring and updating of the Ethernet
- carrier state. With this option set, a thread will be started which
- will periodically check the Ethernet link status of the physical
- Ethernet ports and set the carrier state of the corresponding KNI
- network interface to match it. This means that the KNI interface will
- be disabled automatically when the Ethernet link goes down and enabled
- when the Ethernet link goes up.
-
-Refer to *DPDK Getting Started Guide* for general information on running
-applications and the Environment Abstraction Layer (EAL) options.
-
-The ``-c coremask`` or ``-l corelist`` parameter of the EAL options must
-include the lcores specified by ``lcore_rx`` and ``lcore_tx`` for each port,
-but does not need to include lcores specified by ``lcore_kthread`` as those
-cores are used to pin the kernel threads in the ``rte_kni`` kernel module.
-
-The ``--config`` parameter must include a set of
-``(port,lcore_rx,lcore_tx,[lcore_kthread,...])`` values for each physical
-port specified in the ``-p PORTMASK`` parameter.
-
-The optional ``lcore_kthread`` lcore ID parameter in ``--config`` can be
-specified zero, one or more times for each physical port.
-
-If no lcore ID is specified for ``lcore_kthread``, one KNI interface will
-be created for the physical port ``port`` and the KNI kernel thread(s)
-will have no specific core affinity.
-
-If one or more lcore IDs are specified for ``lcore_kthread``, a KNI interface
-will be created for each lcore ID specified, bound to the physical port
-``port``. If the ``rte_kni`` kernel module is loaded in :ref:`multiple
-kernel thread <kni_kernel_thread_mode>` mode, a kernel thread will be created
-for each KNI interface and bound to the specified core. If the ``rte_kni``
-kernel module is loaded in :ref:`single kernel thread <kni_kernel_thread_mode>`
-mode, only one kernel thread is started for all KNI interfaces. The kernel
-thread will be bound to the first ``lcore_kthread`` lcore ID specified.
-
-Example Configurations
-~~~~~~~~~~~~~~~~~~~~~~~
-
-The following commands will first load the ``rte_kni`` kernel module in
-:ref:`multiple kernel thread <kni_kernel_thread_mode>` mode. The ``kni``
-application is then started using two ports; Port 0 uses lcore 4 for the
-Rx task, lcore 6 for the Tx task, and will create a single KNI interface
-``vEth0_0`` with the kernel thread bound to lcore 8. Port 1 uses lcore
-5 for the Rx task, lcore 7 for the Tx task, and will create a single KNI
-interface ``vEth1_0`` with the kernel thread bound to lcore 9.
-
-.. code-block:: console
-
- # rmmod rte_kni
- # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple
- # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8),(1,5,7,9)"
-
-The following example is identical, except an additional ``lcore_kthread``
-core is specified per physical port. In this case, ``kni`` will create
-four KNI interfaces: ``vEth0_0``/``vEth0_1`` bound to physical port 0 and
-``vEth1_0``/``vEth1_1`` bound to physical port 1.
-
-The kernel thread for each interface will be bound as follows:
-
- * ``vEth0_0`` - bound to lcore 8.
- * ``vEth0_1`` - bound to lcore 10.
- * ``vEth1_0`` - bound to lcore 9.
- * ``vEth1_1`` - bound to lcore 11
-
-.. code-block:: console
-
- # rmmod rte_kni
- # insmod <build_dir>/kernel/linux/kni/rte_kni.ko kthread_mode=multiple
- # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 -m --config="(0,4,6,8,10),(1,5,7,9,11)"
-
-The following example can be used to test the interface between the ``kni``
-test application and the ``rte_kni`` kernel module. In this example,
-the ``rte_kni`` kernel module is loaded in :ref:`single kernel thread
-mode <kni_kernel_thread_mode>`, :ref:`loopback mode <kni_loopback_mode>`
-enabled, and the :ref:`default carrier state <kni_default_carrier_state>`
-is set to *on* so that the corresponding physical NIC port does not have
-to be connected in order to use the KNI interface. One KNI interface
-``vEth0_0`` is created for port 0 and one KNI interface ``vEth1_0`` is
-created for port 1. Since ``rte_kni`` is loaded in "single kernel thread"
-mode, the one kernel thread is bound to lcore 8.
-
-Since the physical NIC ports are not being used, link monitoring can be
-disabled by **not** specifying the ``-m`` flag to ``kni``:
-
-.. code-block:: console
-
- # rmmod rte_kni
- # insmod <build_dir>/kernel/linux/kni/rte_kni.ko lo_mode=lo_mode_fifo carrier=on
- # ./<build-dir>/examples/dpdk-kni -l 4-7 -n 4 -- -P -p 0x3 --config="(0,4,6,8),(1,5,7,9)"
-
-KNI Operations
---------------
-
-Once the ``kni`` application is started, the user can use the normal
-Linux commands to manage the KNI interfaces as if they were any other
-Linux network interface.
-
-Enable KNI interface and assign an IP address:
-
-.. code-block:: console
-
- # ip addr add dev vEth0_0 192.168.0.1
-
-Show KNI interface configuration and statistics:
-
-.. code-block:: console
-
- # ip -s -d addr show vEth0_0
-
-The user can also check and reset the packet statistics inside the ``kni``
-application by sending the app the USR1 and USR2 signals:
-
-.. code-block:: console
-
- # Print statistics
- # pkill -USR1 kni
-
- # Zero statistics
- # pkill -USR2 kni
-
-Dump network traffic:
-
-.. code-block:: console
-
- # tshark -n -i vEth0_0
-
-The normal Linux commands can also be used to change the MAC address and
-MTU size used by the physical NIC which corresponds to the KNI interface.
-However, if more than one KNI interface is configured for a physical port,
-these commands will only work on the first KNI interface for that port.
-
-Change the MAC address:
-
-.. code-block:: console
-
- # ip link set dev vEth0_0 lladdr 0C:01:02:03:04:08
-
-Change the MTU size:
-
-.. code-block:: console
-
- # ip link set dev vEth0_0 mtu 1450
-
-Limited ethtool support:
-
-.. code-block:: console
-
- # ethtool -i vEth0_0
-
-When the ``kni`` application is closed, all the KNI interfaces are deleted
-from the Linux kernel.
-
-Explanation
------------
-
-The following sections provide some explanation of code.
-
-Initialization
-~~~~~~~~~~~~~~
-
-Setup of mbuf pool, driver and queues is similar to the setup done in the :doc:`l2_forward_real_virtual`..
-In addition, one or more kernel NIC interfaces are allocated for each
-of the configured ports according to the command line parameters.
-
-The code for allocating the kernel NIC interfaces for a specific port is
-in the function ``kni_alloc``.
-
-The other step in the initialization process that is unique to this sample application
-is the association of each port with lcores for RX, TX and kernel threads.
-
-* One lcore to read from the port and write to the associated one or more KNI devices
-
-* Another lcore to read from one or more KNI devices and write to the port
-
-* Other lcores for pinning the kernel threads on one by one
-
-This is done by using the ``kni_port_params_array[]`` array, which is indexed by the port ID.
-The code is in the function ``parse_config``.
-
-Packet Forwarding
-~~~~~~~~~~~~~~~~~
-
-After the initialization steps are completed, the main_loop() function is run on each lcore.
-This function first checks the lcore_id against the user provided lcore_rx and lcore_tx
-to see if this lcore is reading from or writing to kernel NIC interfaces.
-
-For the case that reads from a NIC port and writes to the kernel NIC interfaces (``kni_ingress``),
-the packet reception is the same as in L2 Forwarding sample application
-(see :ref:`l2_fwd_app_rx_tx_packets`).
-The packet transmission is done by sending mbufs into the kernel NIC interfaces by ``rte_kni_tx_burst()``.
-The KNI library automatically frees the mbufs after the kernel successfully copied the mbufs.
-
-For the other case that reads from kernel NIC interfaces
-and writes to a physical NIC port (``kni_egress``),
-packets are retrieved by reading mbufs from kernel NIC interfaces by ``rte_kni_rx_burst()``.
-The packet transmission is the same as in the L2 Forwarding sample application
-(see :ref:`l2_fwd_app_rx_tx_packets`).
deleted file mode 100644
@@ -1,52 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-
-# binary name
-APP = kni
-
-# all source are stored in SRCS-y
-SRCS-y := main.c
-
-PKGCONF ?= pkg-config
-
-# Build using pkg-config variables if possible
-ifneq ($(shell $(PKGCONF) --exists libdpdk && echo 0),0)
-$(error "no installation of DPDK found")
-endif
-
-all: shared
-.PHONY: shared static
-shared: build/$(APP)-shared
- ln -sf $(APP)-shared build/$(APP)
-static: build/$(APP)-static
- ln -sf $(APP)-static build/$(APP)
-
-PC_FILE := $(shell $(PKGCONF) --path libdpdk 2>/dev/null)
-CFLAGS += -O3 $(shell $(PKGCONF) --cflags libdpdk)
-CFLAGS += -DALLOW_EXPERIMENTAL_API
-LDFLAGS_SHARED = $(shell $(PKGCONF) --libs libdpdk)
-LDFLAGS_STATIC = $(shell $(PKGCONF) --static --libs libdpdk)
-
-ifeq ($(MAKECMDGOALS),static)
-# check for broken pkg-config
-ifeq ($(shell echo $(LDFLAGS_STATIC) | grep 'whole-archive.*l:lib.*no-whole-archive'),)
-$(warning "pkg-config output list does not contain drivers between 'whole-archive'/'no-whole-archive' flags.")
-$(error "Cannot generate statically-linked binaries with this version of pkg-config")
-endif
-endif
-
-LDFLAGS += -pthread
-
-build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
- $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
-
-build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
- $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
-
-build:
- @mkdir -p $@
-
-.PHONY: clean
-clean:
- rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
- test -d build && rmdir -p build || true
deleted file mode 100644
@@ -1,1140 +0,0 @@
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2010-2014 Intel Corporation
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <inttypes.h>
-#include <string.h>
-#include <sys/queue.h>
-#include <stdarg.h>
-#include <errno.h>
-#include <getopt.h>
-
-#include <netinet/in.h>
-#include <linux/if.h>
-#include <linux/if_tun.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <signal.h>
-
-#include <rte_common.h>
-#include <rte_log.h>
-#include <rte_memory.h>
-#include <rte_memcpy.h>
-#include <rte_eal.h>
-#include <rte_per_lcore.h>
-#include <rte_launch.h>
-#include <rte_lcore.h>
-#include <rte_branch_prediction.h>
-#include <rte_interrupts.h>
-#include <rte_bus_pci.h>
-#include <rte_debug.h>
-#include <rte_ether.h>
-#include <rte_ethdev.h>
-#include <rte_mempool.h>
-#include <rte_mbuf.h>
-#include <rte_string_fns.h>
-#include <rte_cycles.h>
-#include <rte_malloc.h>
-#include <rte_kni.h>
-
-/* Macros for printing using RTE_LOG */
-#define RTE_LOGTYPE_APP RTE_LOGTYPE_USER1
-
-/* Max size of a single packet */
-#define MAX_PACKET_SZ 2048
-
-/* Size of the data buffer in each mbuf */
-#define MBUF_DATA_SZ (MAX_PACKET_SZ + RTE_PKTMBUF_HEADROOM)
-
-/* Number of mbufs in mempool that is created */
-#define NB_MBUF (8192 * 16)
-
-/* How many packets to attempt to read from NIC in one go */
-#define PKT_BURST_SZ 32
-
-/* How many objects (mbufs) to keep in per-lcore mempool cache */
-#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
-
-/* Number of RX ring descriptors */
-#define NB_RXD 1024
-
-/* Number of TX ring descriptors */
-#define NB_TXD 1024
-
-/* Total octets in ethernet header */
-#define KNI_ENET_HEADER_SIZE 14
-
-/* Total octets in the FCS */
-#define KNI_ENET_FCS_SIZE 4
-
-#define KNI_US_PER_SECOND 1000000
-#define KNI_SECOND_PER_DAY 86400
-
-#define KNI_MAX_KTHREAD 32
-/*
- * Structure of port parameters
- */
-struct kni_port_params {
- uint16_t port_id;/* Port ID */
- unsigned lcore_rx; /* lcore ID for RX */
- unsigned lcore_tx; /* lcore ID for TX */
- uint32_t nb_lcore_k; /* Number of lcores for KNI multi kernel threads */
- uint32_t nb_kni; /* Number of KNI devices to be created */
- unsigned lcore_k[KNI_MAX_KTHREAD]; /* lcore ID list for kthreads */
- struct rte_kni *kni[KNI_MAX_KTHREAD]; /* KNI context pointers */
-} __rte_cache_aligned;
-
-static struct kni_port_params *kni_port_params_array[RTE_MAX_ETHPORTS];
-
-
-/* Options for configuring ethernet port */
-static struct rte_eth_conf port_conf = {
- .txmode = {
- .mq_mode = RTE_ETH_MQ_TX_NONE,
- },
-};
-
-/* Mempool for mbufs */
-static struct rte_mempool * pktmbuf_pool = NULL;
-
-/* Mask of enabled ports */
-static uint32_t ports_mask = 0;
-/* Ports set in promiscuous mode off by default. */
-static int promiscuous_on = 0;
-/* Monitor link status continually. off by default. */
-static int monitor_links;
-
-/* Structure type for recording kni interface specific stats */
-struct kni_interface_stats {
- /* number of pkts received from NIC, and sent to KNI */
- uint64_t rx_packets;
-
- /* number of pkts received from NIC, but failed to send to KNI */
- uint64_t rx_dropped;
-
- /* number of pkts received from KNI, and sent to NIC */
- uint64_t tx_packets;
-
- /* number of pkts received from KNI, but failed to send to NIC */
- uint64_t tx_dropped;
-};
-
-/* kni device statistics array */
-static struct kni_interface_stats kni_stats[RTE_MAX_ETHPORTS];
-
-static int kni_change_mtu(uint16_t port_id, unsigned int new_mtu);
-static int kni_config_network_interface(uint16_t port_id, uint8_t if_up);
-static int kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[]);
-
-static uint32_t kni_stop;
-static uint32_t kni_pause;
-
-/* Print out statistics on packets handled */
-static void
-print_stats(void)
-{
- uint16_t i;
-
- printf("\n**KNI example application statistics**\n"
- "====== ============== ============ ============ ============ ============\n"
- " Port Lcore(RX/TX) rx_packets rx_dropped tx_packets tx_dropped\n"
- "------ -------------- ------------ ------------ ------------ ------------\n");
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (!kni_port_params_array[i])
- continue;
-
- printf("%7d %10u/%2u %13"PRIu64" %13"PRIu64" %13"PRIu64" "
- "%13"PRIu64"\n", i,
- kni_port_params_array[i]->lcore_rx,
- kni_port_params_array[i]->lcore_tx,
- kni_stats[i].rx_packets,
- kni_stats[i].rx_dropped,
- kni_stats[i].tx_packets,
- kni_stats[i].tx_dropped);
- }
- printf("====== ============== ============ ============ ============ ============\n");
-
- fflush(stdout);
-}
-
-/* Custom handling of signals to handle stats and kni processing */
-static void
-signal_handler(int signum)
-{
- /* When we receive a USR1 signal, print stats */
- if (signum == SIGUSR1) {
- print_stats();
- }
-
- /* When we receive a USR2 signal, reset stats */
- if (signum == SIGUSR2) {
- memset(&kni_stats, 0, sizeof(kni_stats));
- printf("\n** Statistics have been reset **\n");
- return;
- }
-
- /*
- * When we receive a RTMIN or SIGINT or SIGTERM signal,
- * stop kni processing
- */
- if (signum == SIGRTMIN || signum == SIGINT || signum == SIGTERM) {
- printf("\nSIGRTMIN/SIGINT/SIGTERM received. "
- "KNI processing stopping.\n");
- __atomic_fetch_add(&kni_stop, 1, __ATOMIC_RELAXED);
- return;
- }
-}
-
-static void
-kni_burst_free_mbufs(struct rte_mbuf **pkts, unsigned num)
-{
- unsigned i;
-
- if (pkts == NULL)
- return;
-
- for (i = 0; i < num; i++) {
- rte_pktmbuf_free(pkts[i]);
- pkts[i] = NULL;
- }
-}
-
-/**
- * Interface to burst rx and enqueue mbufs into rx_q
- */
-static void
-kni_ingress(struct kni_port_params *p)
-{
- uint8_t i;
- uint16_t port_id;
- unsigned nb_rx, num;
- uint32_t nb_kni;
- struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
-
- if (p == NULL)
- return;
-
- nb_kni = p->nb_kni;
- port_id = p->port_id;
- for (i = 0; i < nb_kni; i++) {
- /* Burst rx from eth */
- nb_rx = rte_eth_rx_burst(port_id, 0, pkts_burst, PKT_BURST_SZ);
- if (unlikely(nb_rx > PKT_BURST_SZ)) {
- RTE_LOG(ERR, APP, "Error receiving from eth\n");
- return;
- }
- /* Burst tx to kni */
- num = rte_kni_tx_burst(p->kni[i], pkts_burst, nb_rx);
- if (num)
- kni_stats[port_id].rx_packets += num;
-
- rte_kni_handle_request(p->kni[i]);
- if (unlikely(num < nb_rx)) {
- /* Free mbufs not tx to kni interface */
- kni_burst_free_mbufs(&pkts_burst[num], nb_rx - num);
- kni_stats[port_id].rx_dropped += nb_rx - num;
- }
- }
-}
-
-/**
- * Interface to dequeue mbufs from tx_q and burst tx
- */
-static void
-kni_egress(struct kni_port_params *p)
-{
- uint8_t i;
- uint16_t port_id;
- unsigned nb_tx, num;
- uint32_t nb_kni;
- struct rte_mbuf *pkts_burst[PKT_BURST_SZ];
-
- if (p == NULL)
- return;
-
- nb_kni = p->nb_kni;
- port_id = p->port_id;
- for (i = 0; i < nb_kni; i++) {
- /* Burst rx from kni */
- num = rte_kni_rx_burst(p->kni[i], pkts_burst, PKT_BURST_SZ);
- if (unlikely(num > PKT_BURST_SZ)) {
- RTE_LOG(ERR, APP, "Error receiving from KNI\n");
- return;
- }
- /* Burst tx to eth */
- nb_tx = rte_eth_tx_burst(port_id, 0, pkts_burst, (uint16_t)num);
- if (nb_tx)
- kni_stats[port_id].tx_packets += nb_tx;
- if (unlikely(nb_tx < num)) {
- /* Free mbufs not tx to NIC */
- kni_burst_free_mbufs(&pkts_burst[nb_tx], num - nb_tx);
- kni_stats[port_id].tx_dropped += num - nb_tx;
- }
- }
-}
-
-static int
-main_loop(__rte_unused void *arg)
-{
- uint16_t i;
- int32_t f_stop;
- int32_t f_pause;
- const unsigned lcore_id = rte_lcore_id();
- enum lcore_rxtx {
- LCORE_NONE,
- LCORE_RX,
- LCORE_TX,
- LCORE_MAX
- };
- enum lcore_rxtx flag = LCORE_NONE;
-
- RTE_ETH_FOREACH_DEV(i) {
- if (!kni_port_params_array[i])
- continue;
- if (kni_port_params_array[i]->lcore_rx == (uint8_t)lcore_id) {
- flag = LCORE_RX;
- break;
- } else if (kni_port_params_array[i]->lcore_tx ==
- (uint8_t)lcore_id) {
- flag = LCORE_TX;
- break;
- }
- }
-
- if (flag == LCORE_RX) {
- RTE_LOG(INFO, APP, "Lcore %u is reading from port %d\n",
- kni_port_params_array[i]->lcore_rx,
- kni_port_params_array[i]->port_id);
- while (1) {
- f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
- f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
- if (f_stop)
- break;
- if (f_pause)
- continue;
- kni_ingress(kni_port_params_array[i]);
- }
- } else if (flag == LCORE_TX) {
- RTE_LOG(INFO, APP, "Lcore %u is writing to port %d\n",
- kni_port_params_array[i]->lcore_tx,
- kni_port_params_array[i]->port_id);
- while (1) {
- f_stop = __atomic_load_n(&kni_stop, __ATOMIC_RELAXED);
- f_pause = __atomic_load_n(&kni_pause, __ATOMIC_RELAXED);
- if (f_stop)
- break;
- if (f_pause)
- continue;
- kni_egress(kni_port_params_array[i]);
- }
- } else
- RTE_LOG(INFO, APP, "Lcore %u has nothing to do\n", lcore_id);
-
- return 0;
-}
-
-/* Display usage instructions */
-static void
-print_usage(const char *prgname)
-{
- RTE_LOG(INFO, APP, "\nUsage: %s [EAL options] -- -p PORTMASK -P -m "
- "[--config (port,lcore_rx,lcore_tx,lcore_kthread...)"
- "[,(port,lcore_rx,lcore_tx,lcore_kthread...)]]\n"
- " -p PORTMASK: hex bitmask of ports to use\n"
- " -P : enable promiscuous mode\n"
- " -m : enable monitoring of port carrier state\n"
- " --config (port,lcore_rx,lcore_tx,lcore_kthread...): "
- "port and lcore configurations\n",
- prgname);
-}
-
-/* Convert string to unsigned number. 0 is returned if error occurs */
-static uint32_t
-parse_unsigned(const char *portmask)
-{
- char *end = NULL;
- unsigned long num;
-
- num = strtoul(portmask, &end, 16);
- if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
- return 0;
-
- return (uint32_t)num;
-}
-
-static void
-print_config(void)
-{
- uint32_t i, j;
- struct kni_port_params **p = kni_port_params_array;
-
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (!p[i])
- continue;
- RTE_LOG(DEBUG, APP, "Port ID: %d\n", p[i]->port_id);
- RTE_LOG(DEBUG, APP, "Rx lcore ID: %u, Tx lcore ID: %u\n",
- p[i]->lcore_rx, p[i]->lcore_tx);
- for (j = 0; j < p[i]->nb_lcore_k; j++)
- RTE_LOG(DEBUG, APP, "Kernel thread lcore ID: %u\n",
- p[i]->lcore_k[j]);
- }
-}
-
-static int
-parse_config(const char *arg)
-{
- const char *p, *p0 = arg;
- char s[256], *end;
- unsigned size;
- enum fieldnames {
- FLD_PORT = 0,
- FLD_LCORE_RX,
- FLD_LCORE_TX,
- _NUM_FLD = KNI_MAX_KTHREAD + 3,
- };
- int i, j, nb_token;
- char *str_fld[_NUM_FLD];
- unsigned long int_fld[_NUM_FLD];
- uint16_t port_id, nb_kni_port_params = 0;
-
- memset(&kni_port_params_array, 0, sizeof(kni_port_params_array));
- while (((p = strchr(p0, '(')) != NULL) &&
- nb_kni_port_params < RTE_MAX_ETHPORTS) {
- p++;
- if ((p0 = strchr(p, ')')) == NULL)
- goto fail;
- size = p0 - p;
- if (size >= sizeof(s)) {
- printf("Invalid config parameters\n");
- goto fail;
- }
- snprintf(s, sizeof(s), "%.*s", size, p);
- nb_token = rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',');
- if (nb_token <= FLD_LCORE_TX) {
- printf("Invalid config parameters\n");
- goto fail;
- }
- for (i = 0; i < nb_token; i++) {
- errno = 0;
- int_fld[i] = strtoul(str_fld[i], &end, 0);
- if (errno != 0 || end == str_fld[i]) {
- printf("Invalid config parameters\n");
- goto fail;
- }
- }
-
- i = 0;
- port_id = int_fld[i++];
- if (port_id >= RTE_MAX_ETHPORTS) {
- printf("Port ID %d could not exceed the maximum %d\n",
- port_id, RTE_MAX_ETHPORTS);
- goto fail;
- }
- if (kni_port_params_array[port_id]) {
- printf("Port %d has been configured\n", port_id);
- goto fail;
- }
- kni_port_params_array[port_id] =
- rte_zmalloc("KNI_port_params",
- sizeof(struct kni_port_params), RTE_CACHE_LINE_SIZE);
- kni_port_params_array[port_id]->port_id = port_id;
- kni_port_params_array[port_id]->lcore_rx =
- (uint8_t)int_fld[i++];
- kni_port_params_array[port_id]->lcore_tx =
- (uint8_t)int_fld[i++];
- if (kni_port_params_array[port_id]->lcore_rx >= RTE_MAX_LCORE ||
- kni_port_params_array[port_id]->lcore_tx >= RTE_MAX_LCORE) {
- printf("lcore_rx %u or lcore_tx %u ID could not "
- "exceed the maximum %u\n",
- kni_port_params_array[port_id]->lcore_rx,
- kni_port_params_array[port_id]->lcore_tx,
- (unsigned)RTE_MAX_LCORE);
- goto fail;
- }
- for (j = 0; i < nb_token && j < KNI_MAX_KTHREAD; i++, j++)
- kni_port_params_array[port_id]->lcore_k[j] =
- (uint8_t)int_fld[i];
- kni_port_params_array[port_id]->nb_lcore_k = j;
- }
- print_config();
-
- return 0;
-
-fail:
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (kni_port_params_array[i]) {
- rte_free(kni_port_params_array[i]);
- kni_port_params_array[i] = NULL;
- }
- }
-
- return -1;
-}
-
-static int
-validate_parameters(uint32_t portmask)
-{
- uint32_t i;
-
- if (!portmask) {
- printf("No port configured in port mask\n");
- return -1;
- }
-
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (((portmask & (1 << i)) && !kni_port_params_array[i]) ||
- (!(portmask & (1 << i)) && kni_port_params_array[i]))
- rte_exit(EXIT_FAILURE, "portmask is not consistent "
- "to port ids specified in --config\n");
-
- if (kni_port_params_array[i] && !rte_lcore_is_enabled(\
- (unsigned)(kni_port_params_array[i]->lcore_rx)))
- rte_exit(EXIT_FAILURE, "lcore id %u for "
- "port %d receiving not enabled\n",
- kni_port_params_array[i]->lcore_rx,
- kni_port_params_array[i]->port_id);
-
- if (kni_port_params_array[i] && !rte_lcore_is_enabled(\
- (unsigned)(kni_port_params_array[i]->lcore_tx)))
- rte_exit(EXIT_FAILURE, "lcore id %u for "
- "port %d transmitting not enabled\n",
- kni_port_params_array[i]->lcore_tx,
- kni_port_params_array[i]->port_id);
-
- }
-
- return 0;
-}
-
-#define CMDLINE_OPT_CONFIG "config"
-
-/* Parse the arguments given in the command line of the application */
-static int
-parse_args(int argc, char **argv)
-{
- int opt, longindex, ret = 0;
- const char *prgname = argv[0];
- static struct option longopts[] = {
- {CMDLINE_OPT_CONFIG, required_argument, NULL, 0},
- {NULL, 0, NULL, 0}
- };
-
- /* Disable printing messages within getopt() */
- opterr = 0;
-
- /* Parse command line */
- while ((opt = getopt_long(argc, argv, "p:Pm", longopts,
- &longindex)) != EOF) {
- switch (opt) {
- case 'p':
- ports_mask = parse_unsigned(optarg);
- break;
- case 'P':
- promiscuous_on = 1;
- break;
- case 'm':
- monitor_links = 1;
- break;
- case 0:
- if (!strncmp(longopts[longindex].name,
- CMDLINE_OPT_CONFIG,
- sizeof(CMDLINE_OPT_CONFIG))) {
- ret = parse_config(optarg);
- if (ret) {
- printf("Invalid config\n");
- print_usage(prgname);
- return -1;
- }
- }
- break;
- default:
- print_usage(prgname);
- rte_exit(EXIT_FAILURE, "Invalid option specified\n");
- }
- }
-
- /* Check that options were parsed ok */
- if (validate_parameters(ports_mask) < 0) {
- print_usage(prgname);
- rte_exit(EXIT_FAILURE, "Invalid parameters\n");
- }
-
- return ret;
-}
-
-/* Initialize KNI subsystem */
-static void
-init_kni(void)
-{
- unsigned int num_of_kni_ports = 0, i;
- struct kni_port_params **params = kni_port_params_array;
-
- /* Calculate the maximum number of KNI interfaces that will be used */
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (kni_port_params_array[i]) {
- num_of_kni_ports += (params[i]->nb_lcore_k ?
- params[i]->nb_lcore_k : 1);
- }
- }
-
- /* Invoke rte KNI init to preallocate the ports */
- rte_kni_init(num_of_kni_ports);
-}
-
-/* Initialise a single port on an Ethernet device */
-static void
-init_port(uint16_t port)
-{
- int ret;
- uint16_t nb_rxd = NB_RXD;
- uint16_t nb_txd = NB_TXD;
- struct rte_eth_dev_info dev_info;
- struct rte_eth_rxconf rxq_conf;
- struct rte_eth_txconf txq_conf;
- struct rte_eth_conf local_port_conf = port_conf;
-
- /* Initialise device and RX/TX queues */
- RTE_LOG(INFO, APP, "Initialising port %u ...\n", (unsigned)port);
- fflush(stdout);
-
- ret = rte_eth_dev_info_get(port, &dev_info);
- if (ret != 0)
- rte_exit(EXIT_FAILURE,
- "Error during getting device (port %u) info: %s\n",
- port, strerror(-ret));
-
- if (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE)
- local_port_conf.txmode.offloads |=
- RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
- ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not configure port%u (%d)\n",
- (unsigned)port, ret);
-
- ret = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
- "for port%u (%d)\n", (unsigned)port, ret);
-
- rxq_conf = dev_info.default_rxconf;
- rxq_conf.offloads = local_port_conf.rxmode.offloads;
- ret = rte_eth_rx_queue_setup(port, 0, nb_rxd,
- rte_eth_dev_socket_id(port), &rxq_conf, pktmbuf_pool);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not setup up RX queue for "
- "port%u (%d)\n", (unsigned)port, ret);
-
- txq_conf = dev_info.default_txconf;
- txq_conf.offloads = local_port_conf.txmode.offloads;
- ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
- rte_eth_dev_socket_id(port), &txq_conf);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
- "port%u (%d)\n", (unsigned)port, ret);
-
- ret = rte_eth_dev_start(port);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
- (unsigned)port, ret);
-
- if (promiscuous_on) {
- ret = rte_eth_promiscuous_enable(port);
- if (ret != 0)
- rte_exit(EXIT_FAILURE,
- "Could not enable promiscuous mode for port%u: %s\n",
- port, rte_strerror(-ret));
- }
-}
-
-/* Check the link status of all ports in up to 9s, and print them finally */
-static void
-check_all_ports_link_status(uint32_t port_mask)
-{
-#define CHECK_INTERVAL 100 /* 100ms */
-#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint16_t portid;
- uint8_t count, all_ports_up, print_flag = 0;
- struct rte_eth_link link;
- int ret;
- char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
-
- printf("\nChecking link status\n");
- fflush(stdout);
- for (count = 0; count <= MAX_CHECK_TIME; count++) {
- all_ports_up = 1;
- RTE_ETH_FOREACH_DEV(portid) {
- if ((port_mask & (1 << portid)) == 0)
- continue;
- memset(&link, 0, sizeof(link));
- ret = rte_eth_link_get_nowait(portid, &link);
- if (ret < 0) {
- all_ports_up = 0;
- if (print_flag == 1)
- printf("Port %u link get failed: %s\n",
- portid, rte_strerror(-ret));
- continue;
- }
- /* print link status if flag set */
- if (print_flag == 1) {
- rte_eth_link_to_str(link_status_text,
- sizeof(link_status_text), &link);
- printf("Port %d %s\n", portid,
- link_status_text);
- continue;
- }
- /* clear all_ports_up flag if any link down */
- if (link.link_status == RTE_ETH_LINK_DOWN) {
- all_ports_up = 0;
- break;
- }
- }
- /* after finally printing all link status, get out */
- if (print_flag == 1)
- break;
-
- if (all_ports_up == 0) {
- printf(".");
- fflush(stdout);
- rte_delay_ms(CHECK_INTERVAL);
- }
-
- /* set the print_flag if all ports up or timeout */
- if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
- print_flag = 1;
- printf("done\n");
- }
- }
-}
-
-static void
-log_link_state(struct rte_kni *kni, int prev, struct rte_eth_link *link)
-{
- char link_status_text[RTE_ETH_LINK_MAX_STR_LEN];
- if (kni == NULL || link == NULL)
- return;
-
- rte_eth_link_to_str(link_status_text, sizeof(link_status_text), link);
- if (prev != link->link_status)
- RTE_LOG(INFO, APP, "%s NIC %s\n",
- rte_kni_get_name(kni),
- link_status_text);
-}
-
-/*
- * Monitor the link status of all ports and update the
- * corresponding KNI interface(s)
- */
-static void *
-monitor_all_ports_link_status(void *arg)
-{
- uint16_t portid;
- struct rte_eth_link link;
- unsigned int i;
- struct kni_port_params **p = kni_port_params_array;
- int prev;
- (void) arg;
- int ret;
-
- while (monitor_links) {
- rte_delay_ms(500);
- RTE_ETH_FOREACH_DEV(portid) {
- if ((ports_mask & (1 << portid)) == 0)
- continue;
- memset(&link, 0, sizeof(link));
- ret = rte_eth_link_get_nowait(portid, &link);
- if (ret < 0) {
- RTE_LOG(ERR, APP,
- "Get link failed (port %u): %s\n",
- portid, rte_strerror(-ret));
- continue;
- }
- for (i = 0; i < p[portid]->nb_kni; i++) {
- prev = rte_kni_update_link(p[portid]->kni[i],
- link.link_status);
- log_link_state(p[portid]->kni[i], prev, &link);
- }
- }
- }
- return NULL;
-}
-
-static int
-kni_change_mtu_(uint16_t port_id, unsigned int new_mtu)
-{
- int ret;
- uint16_t nb_rxd = NB_RXD;
- uint16_t nb_txd = NB_TXD;
- struct rte_eth_conf conf;
- struct rte_eth_dev_info dev_info;
- struct rte_eth_rxconf rxq_conf;
- struct rte_eth_txconf txq_conf;
-
- if (!rte_eth_dev_is_valid_port(port_id)) {
- RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
- return -EINVAL;
- }
-
- RTE_LOG(INFO, APP, "Change MTU of port %d to %u\n", port_id, new_mtu);
-
- /* Stop specific port */
- ret = rte_eth_dev_stop(port_id);
- if (ret != 0) {
- RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
- port_id, rte_strerror(-ret));
- return ret;
- }
-
- memcpy(&conf, &port_conf, sizeof(conf));
-
- conf.rxmode.mtu = new_mtu;
- ret = rte_eth_dev_configure(port_id, 1, 1, &conf);
- if (ret < 0) {
- RTE_LOG(ERR, APP, "Fail to reconfigure port %d\n", port_id);
- return ret;
- }
-
- ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd, &nb_txd);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not adjust number of descriptors "
- "for port%u (%d)\n", (unsigned int)port_id,
- ret);
-
- ret = rte_eth_dev_info_get(port_id, &dev_info);
- if (ret != 0) {
- RTE_LOG(ERR, APP,
- "Error during getting device (port %u) info: %s\n",
- port_id, strerror(-ret));
-
- return ret;
- }
-
- rxq_conf = dev_info.default_rxconf;
- rxq_conf.offloads = conf.rxmode.offloads;
- ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
- rte_eth_dev_socket_id(port_id), &rxq_conf, pktmbuf_pool);
- if (ret < 0) {
- RTE_LOG(ERR, APP, "Fail to setup Rx queue of port %d\n",
- port_id);
- return ret;
- }
-
- txq_conf = dev_info.default_txconf;
- txq_conf.offloads = conf.txmode.offloads;
- ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
- rte_eth_dev_socket_id(port_id), &txq_conf);
- if (ret < 0) {
- RTE_LOG(ERR, APP, "Fail to setup Tx queue of port %d\n",
- port_id);
- return ret;
- }
-
- /* Restart specific port */
- ret = rte_eth_dev_start(port_id);
- if (ret < 0) {
- RTE_LOG(ERR, APP, "Fail to restart port %d\n", port_id);
- return ret;
- }
-
- return 0;
-}
-
-/* Callback for request of changing MTU */
-static int
-kni_change_mtu(uint16_t port_id, unsigned int new_mtu)
-{
- int ret;
-
- __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
- ret = kni_change_mtu_(port_id, new_mtu);
- __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
-
- return ret;
-}
-
-/* Callback for request of configuring network interface up/down */
-static int
-kni_config_network_interface(uint16_t port_id, uint8_t if_up)
-{
- int ret = 0;
-
- if (!rte_eth_dev_is_valid_port(port_id)) {
- RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
- return -EINVAL;
- }
-
- RTE_LOG(INFO, APP, "Configure network interface of %d %s\n",
- port_id, if_up ? "up" : "down");
-
- __atomic_fetch_add(&kni_pause, 1, __ATOMIC_RELAXED);
-
- if (if_up != 0) { /* Configure network interface up */
- ret = rte_eth_dev_stop(port_id);
- if (ret != 0) {
- RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
- port_id, rte_strerror(-ret));
- __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
- return ret;
- }
- ret = rte_eth_dev_start(port_id);
- } else { /* Configure network interface down */
- ret = rte_eth_dev_stop(port_id);
- if (ret != 0) {
- RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
- port_id, rte_strerror(-ret));
- __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
- return ret;
- }
- }
-
- __atomic_fetch_sub(&kni_pause, 1, __ATOMIC_RELAXED);
-
- if (ret < 0)
- RTE_LOG(ERR, APP, "Failed to start port %d\n", port_id);
-
- return ret;
-}
-
-static void
-print_ethaddr(const char *name, struct rte_ether_addr *mac_addr)
-{
- char buf[RTE_ETHER_ADDR_FMT_SIZE];
- rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, mac_addr);
- RTE_LOG(INFO, APP, "\t%s%s\n", name, buf);
-}
-
-/* Callback for request of configuring mac address */
-static int
-kni_config_mac_address(uint16_t port_id, uint8_t mac_addr[])
-{
- int ret = 0;
-
- if (!rte_eth_dev_is_valid_port(port_id)) {
- RTE_LOG(ERR, APP, "Invalid port id %d\n", port_id);
- return -EINVAL;
- }
-
- RTE_LOG(INFO, APP, "Configure mac address of %d\n", port_id);
- print_ethaddr("Address:", (struct rte_ether_addr *)mac_addr);
-
- ret = rte_eth_dev_default_mac_addr_set(port_id,
- (struct rte_ether_addr *)mac_addr);
- if (ret < 0)
- RTE_LOG(ERR, APP, "Failed to config mac_addr for port %d\n",
- port_id);
-
- return ret;
-}
-
-static int
-kni_alloc(uint16_t port_id)
-{
- uint8_t i;
- struct rte_kni *kni;
- struct rte_kni_conf conf;
- struct kni_port_params **params = kni_port_params_array;
- int ret;
-
- if (port_id >= RTE_MAX_ETHPORTS || !params[port_id])
- return -1;
-
- params[port_id]->nb_kni = params[port_id]->nb_lcore_k ?
- params[port_id]->nb_lcore_k : 1;
-
- for (i = 0; i < params[port_id]->nb_kni; i++) {
- /* Clear conf at first */
- memset(&conf, 0, sizeof(conf));
- if (params[port_id]->nb_lcore_k) {
- snprintf(conf.name, RTE_KNI_NAMESIZE,
- "vEth%u_%u", port_id, i);
- conf.core_id = params[port_id]->lcore_k[i];
- conf.force_bind = 1;
- } else
- snprintf(conf.name, RTE_KNI_NAMESIZE,
- "vEth%u", port_id);
- conf.group_id = port_id;
- conf.mbuf_size = MAX_PACKET_SZ;
- /*
- * The first KNI device associated to a port
- * is the main, for multiple kernel thread
- * environment.
- */
- if (i == 0) {
- struct rte_kni_ops ops;
- struct rte_eth_dev_info dev_info;
-
- ret = rte_eth_dev_info_get(port_id, &dev_info);
- if (ret != 0)
- rte_exit(EXIT_FAILURE,
- "Error during getting device (port %u) info: %s\n",
- port_id, strerror(-ret));
-
- /* Get the interface default mac address */
- ret = rte_eth_macaddr_get(port_id,
- (struct rte_ether_addr *)&conf.mac_addr);
- if (ret != 0)
- rte_exit(EXIT_FAILURE,
- "Failed to get MAC address (port %u): %s\n",
- port_id, rte_strerror(-ret));
-
- rte_eth_dev_get_mtu(port_id, &conf.mtu);
-
- conf.min_mtu = dev_info.min_mtu;
- conf.max_mtu = dev_info.max_mtu;
-
- memset(&ops, 0, sizeof(ops));
- ops.port_id = port_id;
- ops.change_mtu = kni_change_mtu;
- ops.config_network_if = kni_config_network_interface;
- ops.config_mac_address = kni_config_mac_address;
-
- kni = rte_kni_alloc(pktmbuf_pool, &conf, &ops);
- } else
- kni = rte_kni_alloc(pktmbuf_pool, &conf, NULL);
-
- if (!kni)
- rte_exit(EXIT_FAILURE, "Fail to create kni for "
- "port: %d\n", port_id);
- params[port_id]->kni[i] = kni;
- }
-
- return 0;
-}
-
-static int
-kni_free_kni(uint16_t port_id)
-{
- uint8_t i;
- int ret;
- struct kni_port_params **p = kni_port_params_array;
-
- if (port_id >= RTE_MAX_ETHPORTS || !p[port_id])
- return -1;
-
- for (i = 0; i < p[port_id]->nb_kni; i++) {
- if (rte_kni_release(p[port_id]->kni[i]))
- printf("Fail to release kni\n");
- p[port_id]->kni[i] = NULL;
- }
- ret = rte_eth_dev_stop(port_id);
- if (ret != 0)
- RTE_LOG(ERR, APP, "Failed to stop port %d: %s\n",
- port_id, rte_strerror(-ret));
- rte_eth_dev_close(port_id);
-
- return 0;
-}
-
-/* Initialise ports/queues etc. and start main loop on each core */
-int
-main(int argc, char** argv)
-{
- int ret;
- uint16_t nb_sys_ports, port;
- unsigned i;
- void *retval;
- pthread_t kni_link_tid;
- int pid;
-
- /* Associate signal_handler function with USR signals */
- signal(SIGUSR1, signal_handler);
- signal(SIGUSR2, signal_handler);
- signal(SIGRTMIN, signal_handler);
- signal(SIGINT, signal_handler);
- signal(SIGTERM, signal_handler);
-
- /* Initialise EAL */
- ret = rte_eal_init(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not initialise EAL (%d)\n", ret);
- argc -= ret;
- argv += ret;
-
- /* Parse application arguments (after the EAL ones) */
- ret = parse_args(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Could not parse input parameters\n");
-
- /* Create the mbuf pool */
- pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF,
- MEMPOOL_CACHE_SZ, 0, MBUF_DATA_SZ, rte_socket_id());
- if (pktmbuf_pool == NULL) {
- rte_exit(EXIT_FAILURE, "Could not initialise mbuf pool\n");
- return -1;
- }
-
- /* Get number of ports found in scan */
- nb_sys_ports = rte_eth_dev_count_avail();
- if (nb_sys_ports == 0)
- rte_exit(EXIT_FAILURE, "No supported Ethernet device found\n");
-
- /* Check if the configured port ID is valid */
- for (i = 0; i < RTE_MAX_ETHPORTS; i++)
- if (kni_port_params_array[i] && !rte_eth_dev_is_valid_port(i))
- rte_exit(EXIT_FAILURE, "Configured invalid "
- "port ID %u\n", i);
-
- /* Initialize KNI subsystem */
- init_kni();
-
- /* Initialise each port */
- RTE_ETH_FOREACH_DEV(port) {
- /* Skip ports that are not enabled */
- if (!(ports_mask & (1 << port)))
- continue;
- init_port(port);
-
- if (port >= RTE_MAX_ETHPORTS)
- rte_exit(EXIT_FAILURE, "Can not use more than "
- "%d ports for kni\n", RTE_MAX_ETHPORTS);
-
- kni_alloc(port);
- }
- check_all_ports_link_status(ports_mask);
-
- pid = getpid();
- RTE_LOG(INFO, APP, "========================\n");
- RTE_LOG(INFO, APP, "KNI Running\n");
- RTE_LOG(INFO, APP, "kill -SIGUSR1 %d\n", pid);
- RTE_LOG(INFO, APP, " Show KNI Statistics.\n");
- RTE_LOG(INFO, APP, "kill -SIGUSR2 %d\n", pid);
- RTE_LOG(INFO, APP, " Zero KNI Statistics.\n");
- RTE_LOG(INFO, APP, "========================\n");
- fflush(stdout);
-
- ret = rte_ctrl_thread_create(&kni_link_tid,
- "KNI link status check", NULL,
- monitor_all_ports_link_status, NULL);
- if (ret < 0)
- rte_exit(EXIT_FAILURE,
- "Could not create link status thread!\n");
-
- /* Launch per-lcore function on every lcore */
- rte_eal_mp_remote_launch(main_loop, NULL, CALL_MAIN);
- RTE_LCORE_FOREACH_WORKER(i) {
- if (rte_eal_wait_lcore(i) < 0)
- return -1;
- }
- monitor_links = 0;
- pthread_join(kni_link_tid, &retval);
-
- /* Release resources */
- RTE_ETH_FOREACH_DEV(port) {
- if (!(ports_mask & (1 << port)))
- continue;
- kni_free_kni(port);
- }
- for (i = 0; i < RTE_MAX_ETHPORTS; i++)
- if (kni_port_params_array[i]) {
- rte_free(kni_port_params_array[i]);
- kni_port_params_array[i] = NULL;
- }
-
- /* clean up the EAL */
- rte_eal_cleanup();
-
- return 0;
-}
deleted file mode 100644
@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Intel Corporation
-
-# meson file, for building this example as part of a main DPDK build.
-#
-# To build this example as a standalone application with an already-installed
-# DPDK instance, use 'make'
-
-deps += ['kni', 'bus_pci']
-sources = files(
- 'main.c',
-)
-allow_experimental_apis = true
@@ -24,7 +24,6 @@ all_examples = [
'ip_reassembly',
'ipsec-secgw',
'ipv4_multicast',
- 'kni',
'l2fwd',
'l2fwd-cat',
'l2fwd-crypto',