[V3] net/bonding: add link speeds configuration

  This patch adds link speeds configuration.

---
 -v3: add an intersection of the supported speeds to check 'link_speeds'.
 -v2: resend due to CI compiling failure.

Signed-off-by: Huisong Li <lihuisong@huawei.com>
---
 drivers/net/bonding/eth_bond_private.h |  3 +++
 drivers/net/bonding/rte_eth_bond_api.c |  3 +++
 drivers/net/bonding/rte_eth_bond_pmd.c | 27 ++++++++++++++++++++++++++
 3 files changed, 33 insertions(+)
  

Thanks for making the changes!

Signed-off-by: 3chas3@gmail.com

On 9/21/22 21:33, Huisong Li wrote:
> This patch adds link speeds configuration.
> 
> ---
>   -v3: add an intersection of the supported speeds to check 'link_speeds'.
>   -v2: resend due to CI compiling failure.
> 
> Signed-off-by: Huisong Li <lihuisong@huawei.com>
> ---
>   drivers/net/bonding/eth_bond_private.h |  3 +++
>   drivers/net/bonding/rte_eth_bond_api.c |  3 +++
>   drivers/net/bonding/rte_eth_bond_pmd.c | 27 ++++++++++++++++++++++++++
>   3 files changed, 33 insertions(+)
> 
> diff --git a/drivers/net/bonding/eth_bond_private.h b/drivers/net/bonding/eth_bond_private.h
> index 8222e3cd38..d067ea8c9a 100644
> --- a/drivers/net/bonding/eth_bond_private.h
> +++ b/drivers/net/bonding/eth_bond_private.h
> @@ -131,6 +131,9 @@ struct bond_dev_private {
>   	uint32_t link_down_delay_ms;
>   	uint32_t link_up_delay_ms;
>   
> +	uint32_t speed_capa;
> +	/**< Supported speeds bitmap (RTE_ETH_LINK_SPEED_). */
> +
>   	uint16_t nb_rx_queues;			/**< Total number of rx queues */
>   	uint16_t nb_tx_queues;			/**< Total number of tx queues*/
>   
> diff --git a/drivers/net/bonding/rte_eth_bond_api.c b/drivers/net/bonding/rte_eth_bond_api.c
> index 4ac191c468..e64ec0ed20 100644
> --- a/drivers/net/bonding/rte_eth_bond_api.c
> +++ b/drivers/net/bonding/rte_eth_bond_api.c
> @@ -513,6 +513,8 @@ __eth_bond_slave_add_lock_free(uint16_t bonded_port_id, uint16_t slave_port_id)
>   		internals->primary_port = slave_port_id;
>   		internals->current_primary_port = slave_port_id;
>   
> +		internals->speed_capa = dev_info.speed_capa;
> +
>   		/* Inherit queues settings from first slave */
>   		internals->nb_rx_queues = slave_eth_dev->data->nb_rx_queues;
>   		internals->nb_tx_queues = slave_eth_dev->data->nb_tx_queues;
> @@ -527,6 +529,7 @@ __eth_bond_slave_add_lock_free(uint16_t bonded_port_id, uint16_t slave_port_id)
>   	} else {
>   		int ret;
>   
> +		internals->speed_capa &= dev_info.speed_capa;
>   		eth_bond_slave_inherit_dev_info_rx_next(internals, &dev_info);
>   		eth_bond_slave_inherit_dev_info_tx_next(internals, &dev_info);
>   
> diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
> index 3191158ca7..0adbf0e1b2 100644
> --- a/drivers/net/bonding/rte_eth_bond_pmd.c
> +++ b/drivers/net/bonding/rte_eth_bond_pmd.c
> @@ -1717,6 +1717,8 @@ slave_configure(struct rte_eth_dev *bonded_eth_dev,
>   
>   	slave_eth_dev->data->dev_conf.rxmode.mtu =
>   			bonded_eth_dev->data->dev_conf.rxmode.mtu;
> +	slave_eth_dev->data->dev_conf.link_speeds =
> +			bonded_eth_dev->data->dev_conf.link_speeds;
>   
>   	slave_eth_dev->data->dev_conf.txmode.offloads |=
>   		bonded_eth_dev->data->dev_conf.txmode.offloads;
> @@ -2275,6 +2277,7 @@ bond_ethdev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
>   
>   	dev_info->reta_size = internals->reta_size;
>   	dev_info->hash_key_size = internals->rss_key_len;
> +	dev_info->speed_capa = internals->speed_capa;
>   
>   	return 0;
>   }
> @@ -3591,6 +3594,7 @@ bond_ethdev_configure(struct rte_eth_dev *dev)
>   	uint64_t offloads;
>   	int arg_count;
>   	uint16_t port_id = dev - rte_eth_devices;
> +	uint32_t link_speeds;
>   	uint8_t agg_mode;
>   
>   	static const uint8_t default_rss_key[40] = {
> @@ -3659,6 +3663,29 @@ bond_ethdev_configure(struct rte_eth_dev *dev)
>   		dev->data->dev_conf.txmode.offloads = offloads;
>   	}
>   
> +	link_speeds = dev->data->dev_conf.link_speeds;
> +	/*
> +	 * The default value of 'link_speeds' is zero. From its definition,
> +	 * this value actually means auto-negotiation. But not all PMDs support
> +	 * auto-negotiation. So ignore the check for the auto-negotiation and
> +	 * only consider fixed speed to reduce the impact on PMDs.
> +	 */
> +	if (link_speeds & RTE_ETH_LINK_SPEED_FIXED) {
> +		if ((link_speeds &
> +		    (internals->speed_capa & ~RTE_ETH_LINK_SPEED_FIXED)) == 0) {
> +			RTE_BOND_LOG(ERR, "the fixed speed is not supported by all slave devices.");
> +			return -EINVAL;
> +		}
> +		/*
> +		 * Two '1' in binary of 'link_speeds': bit0 and a unique
> +		 * speed bit.
> +		 */
> +		if (__builtin_popcountl(link_speeds) != 2) {
> +			RTE_BOND_LOG(ERR, "please set a unique speed.");
> +			return -EINVAL;
> +		}
> +	}
> +
>   	/* set the max_rx_pktlen */
>   	internals->max_rx_pktlen = internals->candidate_max_rx_pktlen;
>
  

On 9/25/22 13:35, Chas Williams wrote:
> Thanks for making the changes!
> 
> Signed-off-by: 3chas3@gmail.com

Thanks above sentence into account I treat it as:
Acked-by: Chas Williams <3chas3@gmail.com>

> 
> On 9/21/22 21:33, Huisong Li wrote:
>> This patch adds link speeds configuration.
>>
>> ---
>>   -v3: add an intersection of the supported speeds to check 
>> 'link_speeds'.
>>   -v2: resend due to CI compiling failure.
>>
>> Signed-off-by: Huisong Li <lihuisong@huawei.com>

and this one as a Signed-off-by in a right place.

Applied to dpdk-next-net/main, thanks.