@@ -40,8 +40,8 @@ Installation
To build DPDK with the AESNI_GCM_PMD the user is required to download the multi-buffer
library from `here <https://github.com/01org/intel-ipsec-mb>`_
and compile it on their user system before building DPDK.
-The latest version of the library supported by this PMD is v1.2, which
-can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v1.2.zip>`_.
+The latest version of the library supported by this PMD is v1.3, which
+can be downloaded in `<https://github.com/01org/intel-ipsec-mb/archive/v1.3.zip>`_.
.. code-block:: console
@@ -84,8 +84,8 @@ and the external crypto libraries supported by them:
17.08 - 18.02 Multi-buffer library 0.46 - 0.48
18.05 - 19.02 Multi-buffer library 0.49 - 0.52
19.05 - 20.08 Multi-buffer library 0.52 - 0.55
- 20.11 - 21.08 Multi-buffer library 0.53 - 1.2*
- 21.11+ Multi-buffer library 1.0 - 1.2*
+ 20.11 - 21.08 Multi-buffer library 0.53 - 1.3*
+ 21.11+ Multi-buffer library 1.0 - 1.3*
============= ================================
\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
@@ -1,7 +1,7 @@
.. SPDX-License-Identifier: BSD-3-Clause
Copyright(c) 2015-2018 Intel Corporation.
-AESN-NI Multi Buffer Crypto Poll Mode Driver
+AES-NI Multi Buffer Crypto Poll Mode Driver
============================================
@@ -10,8 +10,6 @@ support for utilizing Intel multi buffer library, see the white paper
`Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors
<https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/fast-multi-buffer-ipsec-implementations-ia-processors-paper.pdf>`_.
-The AES-NI MB PMD has current only been tested on Fedora 21 64-bit with gcc.
-
The AES-NI MB PMD supports synchronous mode of operation with
``rte_cryptodev_sym_cpu_crypto_process`` function call.
@@ -77,6 +75,23 @@ Limitations
* RTE_CRYPTO_CIPHER_DES_DOCSISBPI is not supported for combined Crypto-CRC
DOCSIS security protocol.
+AESNI MB PMD selection over SNOW3G/ZUC/KASUMI PMDs
+--------------------------------------------------
+
+This PMD supports wireless cipher suite (SNOW3G, ZUC and KASUMI).
+On Intel processors, it is recommended to use this PMD instead of SNOW3G, ZUC and KASUMI PMDs,
+as it enables algorithm mixing (e.g. cipher algorithm SNOW3G-UEA2 with
+authentication algorithm AES-CMAC-128) and performance over IMIX (packet size mix) traffic
+is significantly higher.
+
+AESNI MB PMD selection over CHACHA20-POLY1305 PMD
+-------------------------------------------------
+
+This PMD supports Chacha20-Poly1305 algorithm.
+On Intel processors, it is recommended to use this PMD instead of CHACHA20-POLY1305 PMD,
+as it delivers better performance on single segment buffers.
+For multi-segment buffers, it is still recommended to use CHACHA20-POLY1305 PMD,
+until the new SGL API is introduced in the AESNI MB PMD.
Installation
------------
@@ -84,8 +99,8 @@ Installation
To build DPDK with the AESNI_MB_PMD the user is required to download the multi-buffer
library from `here <https://github.com/01org/intel-ipsec-mb>`_
and compile it on their user system before building DPDK.
-The latest version of the library supported by this PMD is v1.2, which
-can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.2.zip>`_.
+The latest version of the library supported by this PMD is v1.3, which
+can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.3.zip>`_.
.. code-block:: console
@@ -130,8 +145,8 @@ and the Multi-Buffer library version supported by them:
18.05 - 19.02 0.49 - 0.52
19.05 - 19.08 0.52
19.11 - 20.08 0.52 - 0.55
- 20.11 - 21.08 0.53 - 1.2*
- 21.11+ 1.0 - 1.2*
+ 20.11 - 21.08 0.53 - 1.3*
+ 21.11+ 1.0 - 1.3*
============== ============================
\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
@@ -16,6 +16,12 @@ AEAD algorithms:
* RTE_CRYPTO_AEAD_CHACHA20_POLY1305
+Chaha20_Poly1305 PMD vs AESNI MB PMD
+------------------------------------
+
+AESNI MB PMD also supports CHACHA20-POLY1305 algorithms.
+It is recommended to use the AESNI MB PMD, which offers better performance on Intel processors, when single-segment buffers are used.
+Take a look at the PMD documentation here :doc:`aesni_mb` for more information.
Installation
------------
@@ -23,8 +29,8 @@ Installation
To build DPDK with the Chacha20-poly1305 PMD the user is required to download
the multi-buffer library from `here <https://github.com/01org/intel-ipsec-mb>`_
and compile it on their user system before building DPDK.
-The latest version of the library supported by this PMD is v1.0, which
-can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.0.zip>`_.
+The latest version of the library supported by this PMD is v1.3, which
+can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.3.zip>`_.
After downloading the library, the user needs to unpack and compile it
on their system before building DPDK:
@@ -64,7 +70,7 @@ and the external crypto libraries supported by them:
============= ================================
DPDK version Crypto library version
============= ================================
- 21.11+ Multi-buffer library 1.0*
+ 21.11+ Multi-buffer library 1.0-1.3*
============= ================================
\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
@@ -30,14 +30,21 @@ Limitations
(if length and/or offset of data to be ciphered is not byte-aligned).
+KASUMI PMD vs AESNI MB PMD
+--------------------------
+
+AESNI MB PMD also supports KASUMI cipher and authentication algorithms,
+It is recommended to use the AESNI MB PMD, which offers better performance on Intel processors.
+Take a look at the PMD documentation here :doc:`aesni_mb` for more information.
+
Installation
------------
To build DPDK with the KASUMI_PMD the user is required to download the multi-buffer
library from `here <https://github.com/01org/intel-ipsec-mb>`_
and compile it on their user system before building DPDK.
-The latest version of the library supported by this PMD is v1.2, which
-can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.2.zip>`_.
+The latest version of the library supported by this PMD is v1.3, which
+can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.3.zip>`_.
After downloading the library, the user needs to unpack and compile it
on their system before building DPDK:
@@ -78,8 +85,8 @@ and the external crypto libraries supported by them:
DPDK version Crypto library version
============= ================================
16.11 - 19.11 LibSSO KASUMI
- 20.02 - 21.08 Multi-buffer library 0.53 - 1.2*
- 21.11+ Multi-buffer library 1.0 - 1.2*
+ 20.02 - 21.08 Multi-buffer library 0.53 - 1.3*
+ 21.11+ Multi-buffer library 1.0 - 1.3*
============= ================================
\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
@@ -29,6 +29,13 @@ Limitations
* In-place bit-level operations for SNOW 3G (UEA2) are not supported
(if length and/or offset of data to be ciphered is not byte-aligned).
+SNOW3G PMD vs AESNI MB PMD
+--------------------------
+
+AESNI MB PMD also supports SNOW3G cipher and authentication algorithms,
+It is recommended to use the AESNI MB PMD, which offers better performance on Intel processors.
+Take a look at the PMD documentation here :doc:`aesni_mb` for more information.
+
Installation
------------
@@ -37,8 +44,8 @@ library and compile it on their user system before building DPDK.
For x86 system, the multi-buffer library is available
`here <https://github.com/01org/intel-ipsec-mb>`_.
-The latest version of the library supported by this PMD is v1.2, which
-can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.2.zip>`_.
+The latest version of the library supported by this PMD is v1.3, which
+can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.3.zip>`_.
For Arm system, ARM64 port of the multi-buffer library can be downloaded from
`<https://gitlab.arm.com/arm-reference-solutions/ipsec-mb/-/tree/main/>`_. The
@@ -83,8 +90,8 @@ and the external crypto libraries supported by them:
DPDK version Crypto library version
============= ================================
16.04 - 19.11 LibSSO SNOW3G
- 20.02 - 21.08 Multi-buffer library 0.53 - 1.2*
- 21.11+ Multi-buffer library 1.0 - 1.2*
+ 20.02 - 21.08 Multi-buffer library 0.53 - 1.3*
+ 21.11+ Multi-buffer library 1.0 - 1.3*
============= ================================
\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
@@ -28,6 +28,12 @@ Limitations
* ZUC (EIA3) supported only if hash offset field is byte-aligned.
* ZUC (EEA3) supported only if cipher length, cipher offset fields are byte-aligned.
+ZUC PMD vs AESNI MB PMD
+-----------------------
+
+AESNI MB PMD also supports ZUC cipher and authentication algorithms,
+It is recommended to use the AESNI MB PMD, which offers better performance on Intel processors.
+Take a look at the PMD documentation here :doc:`aesni_mb` for more information.
Installation
------------
@@ -37,8 +43,8 @@ library and compile it on their user system before building DPDK.
For x86 system, the multi-buffer library is available
`here <https://github.com/01org/intel-ipsec-mb>`_.
-The latest version of the library supported by this PMD is v1.2, which
-can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.2.zip>`_.
+The latest version of the library supported by this PMD is v1.3, which
+can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.3.zip>`_.
For Arm system, ARM64 port of the multi-buffer library can be downloaded from
`<https://gitlab.arm.com/arm-reference-solutions/ipsec-mb/-/tree/main/>`_. The
@@ -83,8 +89,8 @@ and the external crypto libraries supported by them:
DPDK version Crypto library version
============= ================================
16.11 - 19.11 LibSSO ZUC
- 20.02 - 21.08 Multi-buffer library 0.53 - 1.2*
- 21.11+ Multi-buffer library 1.0 - 1.2*
+ 20.02 - 21.08 Multi-buffer library 0.53 - 1.3*
+ 21.11+ Multi-buffer library 1.0 - 1.3*
============= ================================
\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system.
@@ -240,7 +240,16 @@ New Features
* **Updated ipsec_mb crypto driver.**
- Added SNOW-3G and ZUC support for ARM platform.
+ * Added ARM64 port of ipsec-mb library support and SNOW-3G and ZUC
+ support for ARM platform.
+ * Added Intel IPsec MB v1.3 library support for x86 and ARM platform,
+ see the following guides for more details:
+ :doc:`../cryptodevs/aesni_gcm`
+ :doc:`../cryptodevs/aesni_mb`
+ :doc:`../cryptodevs/chacha20_poly1305`
+ :doc:`../cryptodevs/kasumi`
+ :doc:`../cryptodevs/snow3g`
+ :doc:`../cryptodevs/zuc`
* **Added UADK crypto driver.**