doc: update mlxreg command arguments for recent versions
Checks
Commit Message
Recent versions of the command require vhca_id and all_vhca
to be set with the --indexes arg.
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
---
doc/guides/nics/mlx5.rst | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
Comments
Hi,
> -----Original Message-----
> From: Ali Alnubani <alialnu@nvidia.com>
> Sent: Monday, July 3, 2023 10:48 AM
> To: dev@dpdk.org
> Subject: [PATCH] doc: update mlxreg command arguments for recent versions
>
> Recent versions of the command require vhca_id and all_vhca to be set with
> the --indexes arg.
>
> Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Raslan Darawsheh <rasland@nvidia.com>
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
@@ -1887,9 +1887,15 @@ The procedure below is an example of using a ConnectX-5 adapter card (pf0) with
$ ip link set p0 vf 0 trust on
$ ip link set p0 vf 1 trust on
-#. Configure all VFs using mlxreg::
+#. Configure all VFs using mlxreg:
- $ mlxreg -d /dev/mst/mt4121_pciconf0 --reg_name VHCA_TRUST_LEVEL --yes --set "all_vhca=0x1,trust_level=0x1"
+ - For MFT >= 4.21::
+
+ $ mlxreg -d /dev/mst/mt4121_pciconf0 --reg_name VHCA_TRUST_LEVEL --yes --indexes 'all_vhca=0x1,vhca_id=0x0' --set 'trust_level=0x1'
+
+ - For MFT < 4.21::
+
+ $ mlxreg -d /dev/mst/mt4121_pciconf0 --reg_name VHCA_TRUST_LEVEL --yes --set "all_vhca=0x1,trust_level=0x1"
.. note::