[v2,25/29] regexdev: remove experimental tag
Checks
Commit Message
This library was added in 22.11.
Time to make it not experimental.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
lib/regexdev/rte_regexdev.h | 92 -------------------------------------
lib/regexdev/version.map | 2 +-
2 files changed, 1 insertion(+), 93 deletions(-)
Comments
Hi Stephen,
I know that Nvidia, is going to remove the support for regex in the future.
The only other HW that implements this is Marvel.
I don't know about other manufacturers plan to support it. I suggest keeping it as is for now, and maybe
we will need to remove this lib.
Anyone from Marvel can comment on this lib support?
Thanks,
Ori
> -----Original Message-----
> From: Stephen Hemminger <stephen@networkplumber.org>
> Sent: Wednesday, August 9, 2023 3:10 AM
> To: dev@dpdk.org
> Cc: Stephen Hemminger <stephen@networkplumber.org>; Ori Kam
> <orika@nvidia.com>
> Subject: [PATCH v2 25/29] regexdev: remove experimental tag
>
> This library was added in 22.11.
> Time to make it not experimental.
>
> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
> ---
> lib/regexdev/rte_regexdev.h | 92 -------------------------------------
> lib/regexdev/version.map | 2 +-
> 2 files changed, 1 insertion(+), 93 deletions(-)
>
> diff --git a/lib/regexdev/rte_regexdev.h b/lib/regexdev/rte_regexdev.h
> index 25476f1f739d..e8e194e29540 100644
> --- a/lib/regexdev/rte_regexdev.h
> +++ b/lib/regexdev/rte_regexdev.h
> @@ -226,9 +226,6 @@ extern int rte_regexdev_logtype;
> } while (0)
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Check if dev_id is ready.
> *
> * @param dev_id
> @@ -238,27 +235,19 @@ extern int rte_regexdev_logtype;
> * - 0 if device state is not in ready state.
> * - 1 if device state is ready state.
> */
> -__rte_experimental
> int rte_regexdev_is_valid_dev(uint16_t dev_id);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Get the total number of RegEx devices that have been successfully
> * initialised.
> *
> * @return
> * The total number of usable RegEx devices.
> */
> -__rte_experimental
> uint8_t
> rte_regexdev_count(void);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Get the device identifier for the named RegEx device.
> *
> * @param name
> @@ -268,7 +257,6 @@ rte_regexdev_count(void);
> * Returns RegEx device identifier on success.
> * - <0: Failure to find named RegEx device.
> */
> -__rte_experimental
> int
> rte_regexdev_get_dev_id(const char *name);
>
> @@ -628,9 +616,6 @@ struct rte_regexdev_info {
> };
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Retrieve the contextual information of a RegEx device.
> *
> * @param dev_id
> @@ -644,7 +629,6 @@ struct rte_regexdev_info {
> * - 0: Success, driver updates the contextual information of the RegEx device
> * - <0: Error code returned by the driver info get function.
> */
> -__rte_experimental
> int
> rte_regexdev_info_get(uint8_t dev_id, struct rte_regexdev_info *dev_info);
>
> @@ -723,9 +707,6 @@ struct rte_regexdev_config {
> };
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Configure a RegEx device.
> *
> * This function must be invoked first before any other function in the
> @@ -743,7 +724,6 @@ struct rte_regexdev_config {
> * @return
> * - 0: Success, device configured. Otherwise negative errno is returned.
> */
> -__rte_experimental
> int
> rte_regexdev_configure(uint8_t dev_id, const struct rte_regexdev_config *cfg);
>
> @@ -782,9 +762,6 @@ struct rte_regexdev_qp_conf {
> };
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Allocate and set up a RegEx queue pair for a RegEx device.
> *
> * @param dev_id
> @@ -799,15 +776,11 @@ struct rte_regexdev_qp_conf {
> * @return
> * 0 on success. Otherwise negative errno is returned.
> */
> -__rte_experimental
> int
> rte_regexdev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
> const struct rte_regexdev_qp_conf *qp_conf);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Start a RegEx device.
> *
> * The device start step is the last one and consists of setting the RegEx
> @@ -822,14 +795,10 @@ rte_regexdev_queue_pair_setup(uint8_t dev_id,
> uint16_t queue_pair_id,
> * @return
> * 0 on success. Otherwise negative errno is returned.
> */
> -__rte_experimental
> int
> rte_regexdev_start(uint8_t dev_id);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Stop a RegEx device.
> *
> * Stop a RegEx device. The device can be restarted with a call to
> @@ -845,14 +814,10 @@ rte_regexdev_start(uint8_t dev_id);
> * @return
> * 0 on success. Otherwise negative errno is returned.
> */
> -__rte_experimental
> int
> rte_regexdev_stop(uint8_t dev_id);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Close a RegEx device. The device cannot be restarted!
> *
> * @param dev_id
> @@ -861,7 +826,6 @@ rte_regexdev_stop(uint8_t dev_id);
> * @return
> * 0 on success. Otherwise negative errno is returned.
> */
> -__rte_experimental
> int
> rte_regexdev_close(uint8_t dev_id);
>
> @@ -897,9 +861,6 @@ enum rte_regexdev_attr_id {
> };
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Get an attribute from a RegEx device.
> *
> * @param dev_id
> @@ -915,15 +876,11 @@ enum rte_regexdev_attr_id {
> * - -EINVAL: Invalid device or *attr_id* provided, or *attr_value* is NULL.
> * - -ENOTSUP: if the device doesn't support specific *attr_id*.
> */
> -__rte_experimental
> int
> rte_regexdev_attr_get(uint8_t dev_id, enum rte_regexdev_attr_id attr_id,
> void *attr_value);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Set an attribute to a RegEx device.
> *
> * @param dev_id
> @@ -939,7 +896,6 @@ rte_regexdev_attr_get(uint8_t dev_id, enum
> rte_regexdev_attr_id attr_id,
> * - -EINVAL: Invalid device or *attr_id* provided, or *attr_value* is NULL.
> * - -ENOTSUP: if the device doesn't support specific *attr_id*.
> */
> -__rte_experimental
> int
> rte_regexdev_attr_set(uint8_t dev_id, enum rte_regexdev_attr_id attr_id,
> const void *attr_value);
> @@ -975,9 +931,6 @@ struct rte_regexdev_rule {
> };
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Update the local rule set.
> * This functions only modify the rule set in memory.
> * In order for the changes to take effect, the function
> @@ -1008,16 +961,12 @@ struct rte_regexdev_rule {
> * @see rte_regexdev_rule_db_import(), rte_regexdev_rule_db_export(),
> * rte_regexdev_rule_db_compile_activate()
> */
> -__rte_experimental
> int
> rte_regexdev_rule_db_update(uint8_t dev_id,
> const struct rte_regexdev_rule *rules,
> uint32_t nb_rules);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Compile local rule set and burn the complied result to the
> * RegEx device.
> *
> @@ -1030,14 +979,10 @@ rte_regexdev_rule_db_update(uint8_t dev_id,
> * @see rte_regexdev_rule_db_import(), rte_regexdev_rule_db_export(),
> * rte_regexdev_rule_db_update()
> */
> -__rte_experimental
> int
> rte_regexdev_rule_db_compile_activate(uint8_t dev_id);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Import a prebuilt rule database from a buffer to a RegEx device.
> *
> * @param dev_id
> @@ -1055,15 +1000,11 @@ rte_regexdev_rule_db_compile_activate(uint8_t
> dev_id);
> *
> * @see rte_regexdev_rule_db_update(), rte_regexdev_rule_db_export()
> */
> -__rte_experimental
> int
> rte_regexdev_rule_db_import(uint8_t dev_id, const char *rule_db,
> uint32_t rule_db_len);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Export the prebuilt rule database from a RegEx device to the buffer.
> *
> * @param dev_id
> @@ -1080,7 +1021,6 @@ rte_regexdev_rule_db_import(uint8_t dev_id, const
> char *rule_db,
> *
> * @see rte_regexdev_rule_db_update(), rte_regexdev_rule_db_import()
> */
> -__rte_experimental
> int
> rte_regexdev_rule_db_export(uint8_t dev_id, char *rule_db);
>
> @@ -1102,9 +1042,6 @@ struct rte_regexdev_xstats_map {
> };
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Retrieve names of extended statistics of a regex device.
> *
> * @param dev_id
> @@ -1120,15 +1057,11 @@ struct rte_regexdev_xstats_map {
> * -ENODEV for invalid *dev_id*
> * -ENOTSUP if the device doesn't support this function.
> */
> -__rte_experimental
> int
> rte_regexdev_xstats_names_get(uint8_t dev_id,
> struct rte_regexdev_xstats_map *xstats_map);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Retrieve extended statistics of an regex device.
> *
> * @param dev_id
> @@ -1147,15 +1080,11 @@ rte_regexdev_xstats_names_get(uint8_t dev_id,
> * -ENODEV for invalid *dev_id*
> * -ENOTSUP if the device doesn't support this function.
> */
> -__rte_experimental
> int
> rte_regexdev_xstats_get(uint8_t dev_id, const uint16_t *ids,
> uint64_t *values, uint16_t nb_values);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Retrieve the value of a single stat by requesting it by name.
> *
> * @param dev_id
> @@ -1174,15 +1103,11 @@ rte_regexdev_xstats_get(uint8_t dev_id, const
> uint16_t *ids,
> * - -EINVAL: invalid parameters
> * - -ENOTSUP: if not supported.
> */
> -__rte_experimental
> int
> rte_regexdev_xstats_by_name_get(uint8_t dev_id, const char *name,
> uint16_t *id, uint64_t *value);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Reset the values of the xstats of the selected component in the device.
> *
> * @param dev_id
> @@ -1198,15 +1123,11 @@ rte_regexdev_xstats_by_name_get(uint8_t
> dev_id, const char *name,
> * - -EINVAL: invalid parameters.
> * - -ENOTSUP: if not supported.
> */
> -__rte_experimental
> int
> rte_regexdev_xstats_reset(uint8_t dev_id, const uint16_t *ids,
> uint16_t nb_ids);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Trigger the RegEx device self test.
> *
> * @param dev_id
> @@ -1216,14 +1137,10 @@ rte_regexdev_xstats_reset(uint8_t dev_id, const
> uint16_t *ids,
> * - -ENOTSUP if the device doesn't support selftest.
> * - other values < 0 on failure.
> */
> -__rte_experimental
> int
> rte_regexdev_selftest(uint8_t dev_id);
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Dump internal information about *dev_id* to the FILE* provided in *f*.
> *
> * @param dev_id
> @@ -1234,7 +1151,6 @@ rte_regexdev_selftest(uint8_t dev_id);
> * @return
> * 0 on success, negative errno on failure.
> */
> -__rte_experimental
> int
> rte_regexdev_dump(uint8_t dev_id, FILE *f);
>
> @@ -1432,9 +1348,6 @@ struct rte_regex_ops {
> #include "rte_regexdev_core.h"
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Enqueue a burst of scan request on a RegEx device.
> *
> * The rte_regexdev_enqueue_burst() function is invoked to place
> @@ -1468,7 +1381,6 @@ struct rte_regex_ops {
> * remaining ops at the end of *ops* are not consumed and the caller has
> * to take care of them.
> */
> -__rte_experimental
> static inline uint16_t
> rte_regexdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
> struct rte_regex_ops **ops, uint16_t nb_ops)
> @@ -1487,9 +1399,6 @@ rte_regexdev_enqueue_burst(uint8_t dev_id,
> uint16_t qp_id,
> }
>
> /**
> - * @warning
> - * @b EXPERIMENTAL: this API may change without prior notice.
> - *
> * Dequeue a burst of scan response from a queue on the RegEx device.
> * The dequeued operation are stored in *rte_regexdev_op* structures
> * whose pointers are supplied in the *ops* array.
> @@ -1528,7 +1437,6 @@ rte_regexdev_enqueue_burst(uint8_t dev_id,
> uint16_t qp_id,
> * ops at the end of *ops* are not consumed and the caller has to take care
> * of them.
> */
> -__rte_experimental
> static inline uint16_t
> rte_regexdev_dequeue_burst(uint8_t dev_id, uint16_t qp_id,
> struct rte_regex_ops **ops, uint16_t nb_ops)
> diff --git a/lib/regexdev/version.map b/lib/regexdev/version.map
> index 3c6e9fffa1f5..914bd19dfd94 100644
> --- a/lib/regexdev/version.map
> +++ b/lib/regexdev/version.map
> @@ -1,4 +1,4 @@
> -EXPERIMENTAL {
> +DPDK_24 {
> global:
>
> rte_regex_devices;
> --
> 2.39.2
On Wed, Oct 11, 2023 at 6:14 PM Ori Kam <orika@nvidia.com> wrote:
>
> Hi Stephen,
>
> I know that Nvidia, is going to remove the support for regex in the future.
> The only other HW that implements this is Marvel.
>
> I don't know about other manufacturers plan to support it. I suggest keeping it as is for now, and maybe
> we will need to remove this lib.
>
> Anyone from Marvel can comment on this lib support?
Same vibe from Marvell. i.e Regex is not a great workload to offload to HW.
>
> Thanks,
> Ori
@@ -226,9 +226,6 @@ extern int rte_regexdev_logtype;
} while (0)
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Check if dev_id is ready.
*
* @param dev_id
@@ -238,27 +235,19 @@ extern int rte_regexdev_logtype;
* - 0 if device state is not in ready state.
* - 1 if device state is ready state.
*/
-__rte_experimental
int rte_regexdev_is_valid_dev(uint16_t dev_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Get the total number of RegEx devices that have been successfully
* initialised.
*
* @return
* The total number of usable RegEx devices.
*/
-__rte_experimental
uint8_t
rte_regexdev_count(void);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Get the device identifier for the named RegEx device.
*
* @param name
@@ -268,7 +257,6 @@ rte_regexdev_count(void);
* Returns RegEx device identifier on success.
* - <0: Failure to find named RegEx device.
*/
-__rte_experimental
int
rte_regexdev_get_dev_id(const char *name);
@@ -628,9 +616,6 @@ struct rte_regexdev_info {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Retrieve the contextual information of a RegEx device.
*
* @param dev_id
@@ -644,7 +629,6 @@ struct rte_regexdev_info {
* - 0: Success, driver updates the contextual information of the RegEx device
* - <0: Error code returned by the driver info get function.
*/
-__rte_experimental
int
rte_regexdev_info_get(uint8_t dev_id, struct rte_regexdev_info *dev_info);
@@ -723,9 +707,6 @@ struct rte_regexdev_config {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Configure a RegEx device.
*
* This function must be invoked first before any other function in the
@@ -743,7 +724,6 @@ struct rte_regexdev_config {
* @return
* - 0: Success, device configured. Otherwise negative errno is returned.
*/
-__rte_experimental
int
rte_regexdev_configure(uint8_t dev_id, const struct rte_regexdev_config *cfg);
@@ -782,9 +762,6 @@ struct rte_regexdev_qp_conf {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Allocate and set up a RegEx queue pair for a RegEx device.
*
* @param dev_id
@@ -799,15 +776,11 @@ struct rte_regexdev_qp_conf {
* @return
* 0 on success. Otherwise negative errno is returned.
*/
-__rte_experimental
int
rte_regexdev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
const struct rte_regexdev_qp_conf *qp_conf);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Start a RegEx device.
*
* The device start step is the last one and consists of setting the RegEx
@@ -822,14 +795,10 @@ rte_regexdev_queue_pair_setup(uint8_t dev_id, uint16_t queue_pair_id,
* @return
* 0 on success. Otherwise negative errno is returned.
*/
-__rte_experimental
int
rte_regexdev_start(uint8_t dev_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Stop a RegEx device.
*
* Stop a RegEx device. The device can be restarted with a call to
@@ -845,14 +814,10 @@ rte_regexdev_start(uint8_t dev_id);
* @return
* 0 on success. Otherwise negative errno is returned.
*/
-__rte_experimental
int
rte_regexdev_stop(uint8_t dev_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Close a RegEx device. The device cannot be restarted!
*
* @param dev_id
@@ -861,7 +826,6 @@ rte_regexdev_stop(uint8_t dev_id);
* @return
* 0 on success. Otherwise negative errno is returned.
*/
-__rte_experimental
int
rte_regexdev_close(uint8_t dev_id);
@@ -897,9 +861,6 @@ enum rte_regexdev_attr_id {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Get an attribute from a RegEx device.
*
* @param dev_id
@@ -915,15 +876,11 @@ enum rte_regexdev_attr_id {
* - -EINVAL: Invalid device or *attr_id* provided, or *attr_value* is NULL.
* - -ENOTSUP: if the device doesn't support specific *attr_id*.
*/
-__rte_experimental
int
rte_regexdev_attr_get(uint8_t dev_id, enum rte_regexdev_attr_id attr_id,
void *attr_value);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Set an attribute to a RegEx device.
*
* @param dev_id
@@ -939,7 +896,6 @@ rte_regexdev_attr_get(uint8_t dev_id, enum rte_regexdev_attr_id attr_id,
* - -EINVAL: Invalid device or *attr_id* provided, or *attr_value* is NULL.
* - -ENOTSUP: if the device doesn't support specific *attr_id*.
*/
-__rte_experimental
int
rte_regexdev_attr_set(uint8_t dev_id, enum rte_regexdev_attr_id attr_id,
const void *attr_value);
@@ -975,9 +931,6 @@ struct rte_regexdev_rule {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Update the local rule set.
* This functions only modify the rule set in memory.
* In order for the changes to take effect, the function
@@ -1008,16 +961,12 @@ struct rte_regexdev_rule {
* @see rte_regexdev_rule_db_import(), rte_regexdev_rule_db_export(),
* rte_regexdev_rule_db_compile_activate()
*/
-__rte_experimental
int
rte_regexdev_rule_db_update(uint8_t dev_id,
const struct rte_regexdev_rule *rules,
uint32_t nb_rules);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Compile local rule set and burn the complied result to the
* RegEx device.
*
@@ -1030,14 +979,10 @@ rte_regexdev_rule_db_update(uint8_t dev_id,
* @see rte_regexdev_rule_db_import(), rte_regexdev_rule_db_export(),
* rte_regexdev_rule_db_update()
*/
-__rte_experimental
int
rte_regexdev_rule_db_compile_activate(uint8_t dev_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Import a prebuilt rule database from a buffer to a RegEx device.
*
* @param dev_id
@@ -1055,15 +1000,11 @@ rte_regexdev_rule_db_compile_activate(uint8_t dev_id);
*
* @see rte_regexdev_rule_db_update(), rte_regexdev_rule_db_export()
*/
-__rte_experimental
int
rte_regexdev_rule_db_import(uint8_t dev_id, const char *rule_db,
uint32_t rule_db_len);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Export the prebuilt rule database from a RegEx device to the buffer.
*
* @param dev_id
@@ -1080,7 +1021,6 @@ rte_regexdev_rule_db_import(uint8_t dev_id, const char *rule_db,
*
* @see rte_regexdev_rule_db_update(), rte_regexdev_rule_db_import()
*/
-__rte_experimental
int
rte_regexdev_rule_db_export(uint8_t dev_id, char *rule_db);
@@ -1102,9 +1042,6 @@ struct rte_regexdev_xstats_map {
};
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Retrieve names of extended statistics of a regex device.
*
* @param dev_id
@@ -1120,15 +1057,11 @@ struct rte_regexdev_xstats_map {
* -ENODEV for invalid *dev_id*
* -ENOTSUP if the device doesn't support this function.
*/
-__rte_experimental
int
rte_regexdev_xstats_names_get(uint8_t dev_id,
struct rte_regexdev_xstats_map *xstats_map);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Retrieve extended statistics of an regex device.
*
* @param dev_id
@@ -1147,15 +1080,11 @@ rte_regexdev_xstats_names_get(uint8_t dev_id,
* -ENODEV for invalid *dev_id*
* -ENOTSUP if the device doesn't support this function.
*/
-__rte_experimental
int
rte_regexdev_xstats_get(uint8_t dev_id, const uint16_t *ids,
uint64_t *values, uint16_t nb_values);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Retrieve the value of a single stat by requesting it by name.
*
* @param dev_id
@@ -1174,15 +1103,11 @@ rte_regexdev_xstats_get(uint8_t dev_id, const uint16_t *ids,
* - -EINVAL: invalid parameters
* - -ENOTSUP: if not supported.
*/
-__rte_experimental
int
rte_regexdev_xstats_by_name_get(uint8_t dev_id, const char *name,
uint16_t *id, uint64_t *value);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Reset the values of the xstats of the selected component in the device.
*
* @param dev_id
@@ -1198,15 +1123,11 @@ rte_regexdev_xstats_by_name_get(uint8_t dev_id, const char *name,
* - -EINVAL: invalid parameters.
* - -ENOTSUP: if not supported.
*/
-__rte_experimental
int
rte_regexdev_xstats_reset(uint8_t dev_id, const uint16_t *ids,
uint16_t nb_ids);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Trigger the RegEx device self test.
*
* @param dev_id
@@ -1216,14 +1137,10 @@ rte_regexdev_xstats_reset(uint8_t dev_id, const uint16_t *ids,
* - -ENOTSUP if the device doesn't support selftest.
* - other values < 0 on failure.
*/
-__rte_experimental
int
rte_regexdev_selftest(uint8_t dev_id);
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Dump internal information about *dev_id* to the FILE* provided in *f*.
*
* @param dev_id
@@ -1234,7 +1151,6 @@ rte_regexdev_selftest(uint8_t dev_id);
* @return
* 0 on success, negative errno on failure.
*/
-__rte_experimental
int
rte_regexdev_dump(uint8_t dev_id, FILE *f);
@@ -1432,9 +1348,6 @@ struct rte_regex_ops {
#include "rte_regexdev_core.h"
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Enqueue a burst of scan request on a RegEx device.
*
* The rte_regexdev_enqueue_burst() function is invoked to place
@@ -1468,7 +1381,6 @@ struct rte_regex_ops {
* remaining ops at the end of *ops* are not consumed and the caller has
* to take care of them.
*/
-__rte_experimental
static inline uint16_t
rte_regexdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
struct rte_regex_ops **ops, uint16_t nb_ops)
@@ -1487,9 +1399,6 @@ rte_regexdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
}
/**
- * @warning
- * @b EXPERIMENTAL: this API may change without prior notice.
- *
* Dequeue a burst of scan response from a queue on the RegEx device.
* The dequeued operation are stored in *rte_regexdev_op* structures
* whose pointers are supplied in the *ops* array.
@@ -1528,7 +1437,6 @@ rte_regexdev_enqueue_burst(uint8_t dev_id, uint16_t qp_id,
* ops at the end of *ops* are not consumed and the caller has to take care
* of them.
*/
-__rte_experimental
static inline uint16_t
rte_regexdev_dequeue_burst(uint8_t dev_id, uint16_t qp_id,
struct rte_regex_ops **ops, uint16_t nb_ops)
@@ -1,4 +1,4 @@
-EXPERIMENTAL {
+DPDK_24 {
global:
rte_regex_devices;