new file mode 100644
@@ -0,0 +1,390 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2023 HiSilicon Limited
+ */
+
+#include <stdint.h>
+
+#include <rte_alarm.h>
+#include <rte_ethdev.h>
+#include <rte_dev.h>
+#include <rte_log.h>
+#ifdef RTE_NET_MLX5
+#include "mlx5_testpmd.h"
+#endif
+
+#include "testpmd.h"
+
+/* Pretty printing of ethdev events */
+static const char * const eth_event_desc[] = {
+ [RTE_ETH_EVENT_UNKNOWN] = "unknown",
+ [RTE_ETH_EVENT_INTR_LSC] = "link state change",
+ [RTE_ETH_EVENT_QUEUE_STATE] = "queue state",
+ [RTE_ETH_EVENT_INTR_RESET] = "reset",
+ [RTE_ETH_EVENT_VF_MBOX] = "VF mbox",
+ [RTE_ETH_EVENT_IPSEC] = "IPsec",
+ [RTE_ETH_EVENT_MACSEC] = "MACsec",
+ [RTE_ETH_EVENT_INTR_RMV] = "device removal",
+ [RTE_ETH_EVENT_NEW] = "device probed",
+ [RTE_ETH_EVENT_DESTROY] = "device released",
+ [RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
+ [RTE_ETH_EVENT_RX_AVAIL_THRESH] = "RxQ available descriptors threshold reached",
+ [RTE_ETH_EVENT_ERR_RECOVERING] = "error recovering",
+ [RTE_ETH_EVENT_RECOVERY_SUCCESS] = "error recovery successful",
+ [RTE_ETH_EVENT_RECOVERY_FAILED] = "error recovery failed",
+ [RTE_ETH_EVENT_MAX] = NULL,
+};
+
+/*
+ * Display or mask ether events
+ * Default to all events except VF_MBOX
+ */
+uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
+ (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
+ (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV) |
+ (UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED) |
+ (UINT32_C(1) << RTE_ETH_EVENT_ERR_RECOVERING) |
+ (UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_SUCCESS) |
+ (UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_FAILED);
+
+int
+get_event_name_mask(const char *name, uint32_t *mask)
+{
+ if (!strcmp(name, "unknown"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
+ else if (!strcmp(name, "intr_lsc"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
+ else if (!strcmp(name, "queue_state"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
+ else if (!strcmp(name, "intr_reset"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
+ else if (!strcmp(name, "vf_mbox"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
+ else if (!strcmp(name, "ipsec"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
+ else if (!strcmp(name, "macsec"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
+ else if (!strcmp(name, "intr_rmv"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
+ else if (!strcmp(name, "dev_probed"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
+ else if (!strcmp(name, "dev_released"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
+ else if (!strcmp(name, "flow_aged"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
+ else if (!strcmp(name, "err_recovering"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_ERR_RECOVERING;
+ else if (!strcmp(name, "recovery_success"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_SUCCESS;
+ else if (!strcmp(name, "recovery_failed"))
+ *mask = UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_FAILED;
+ else if (!strcmp(name, "all"))
+ *mask = ~UINT32_C(0);
+ else
+ return -1;
+
+ return 0;
+}
+
+static void
+rmv_port_callback(void *arg)
+{
+ int need_to_start = 0;
+ int org_no_link_check = no_link_check;
+ portid_t port_id = (intptr_t)arg;
+ struct rte_eth_dev_info dev_info;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_RET(port_id);
+
+ if (!test_done && port_is_forwarding(port_id)) {
+ need_to_start = 1;
+ stop_packet_forwarding();
+ }
+ no_link_check = 1;
+ stop_port(port_id);
+ no_link_check = org_no_link_check;
+
+ ret = eth_dev_info_get_print_err(port_id, &dev_info);
+ if (ret != 0)
+ TESTPMD_LOG(ERR,
+ "Failed to get device info for port %d, not detaching\n",
+ port_id);
+ else {
+ struct rte_device *device = dev_info.device;
+ close_port(port_id);
+ detach_device(device); /* might be already removed or have more ports */
+ }
+ if (need_to_start)
+ start_packet_forwarding(0);
+}
+
+static int need_start_when_recovery_over;
+
+static bool
+has_port_in_err_recovering(void)
+{
+ struct rte_port *port;
+ portid_t pid;
+
+ RTE_ETH_FOREACH_DEV(pid) {
+ port = &ports[pid];
+ if (port->err_recovering)
+ return true;
+ }
+
+ return false;
+}
+
+static void
+err_recovering_callback(portid_t port_id)
+{
+ if (!has_port_in_err_recovering())
+ printf("Please stop executing any commands until recovery result events are received!\n");
+
+ ports[port_id].err_recovering = 1;
+ ports[port_id].recover_failed = 0;
+
+ /* To simplify implementation, stop forwarding regardless of whether the port is used. */
+ if (!test_done) {
+ printf("Stop packet forwarding because some ports are in error recovering!\n");
+ stop_packet_forwarding();
+ need_start_when_recovery_over = 1;
+ }
+}
+
+static void
+recover_success_callback(portid_t port_id)
+{
+ ports[port_id].err_recovering = 0;
+ if (has_port_in_err_recovering())
+ return;
+
+ if (need_start_when_recovery_over) {
+ printf("Recovery success! Restart packet forwarding!\n");
+ start_packet_forwarding(0);
+ need_start_when_recovery_over = 0;
+ } else {
+ printf("Recovery success!\n");
+ }
+}
+
+static void
+recover_failed_callback(portid_t port_id)
+{
+ struct rte_port *port;
+ portid_t pid;
+
+ ports[port_id].err_recovering = 0;
+ ports[port_id].recover_failed = 1;
+ if (has_port_in_err_recovering())
+ return;
+
+ need_start_when_recovery_over = 0;
+ printf("The ports:");
+ RTE_ETH_FOREACH_DEV(pid) {
+ port = &ports[pid];
+ if (port->recover_failed)
+ printf(" %u", pid);
+ }
+ printf(" recovery failed! Please remove them!\n");
+}
+
+/* This function is used by the interrupt thread */
+static int
+eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
+ void *ret_param)
+{
+ RTE_SET_USED(param);
+ RTE_SET_USED(ret_param);
+
+ if (type >= RTE_ETH_EVENT_MAX) {
+ fprintf(stderr,
+ "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
+ port_id, __func__, type);
+ fflush(stderr);
+ } else if (event_print_mask & (UINT32_C(1) << type)) {
+ printf("\nPort %" PRIu16 ": %s event\n", port_id,
+ eth_event_desc[type]);
+ fflush(stdout);
+ }
+
+ switch (type) {
+ case RTE_ETH_EVENT_NEW:
+ ports[port_id].need_setup = 1;
+ ports[port_id].port_status = RTE_PORT_HANDLING;
+ break;
+ case RTE_ETH_EVENT_INTR_RMV:
+ if (port_id_is_invalid(port_id, DISABLED_WARN))
+ break;
+ if (rte_eal_alarm_set(100000,
+ rmv_port_callback, (void *)(intptr_t)port_id))
+ fprintf(stderr,
+ "Could not set up deferred device removal\n");
+ break;
+ case RTE_ETH_EVENT_DESTROY:
+ ports[port_id].port_status = RTE_PORT_CLOSED;
+ printf("Port %u is closed\n", port_id);
+ break;
+ case RTE_ETH_EVENT_RX_AVAIL_THRESH: {
+ uint16_t rxq_id;
+ int ret;
+
+ /* avail_thresh query API rewinds rxq_id, no need to check max RxQ num */
+ for (rxq_id = 0; ; rxq_id++) {
+ ret = rte_eth_rx_avail_thresh_query(port_id, &rxq_id,
+ NULL);
+ if (ret <= 0)
+ break;
+ printf("Received avail_thresh event, port: %u, rxq_id: %u\n",
+ port_id, rxq_id);
+
+#ifdef RTE_NET_MLX5
+ mlx5_test_avail_thresh_event_handler(port_id, rxq_id);
+#endif
+ }
+ break;
+ }
+ case RTE_ETH_EVENT_ERR_RECOVERING:
+ err_recovering_callback(port_id);
+ break;
+ case RTE_ETH_EVENT_RECOVERY_SUCCESS:
+ recover_success_callback(port_id);
+ break;
+ case RTE_ETH_EVENT_RECOVERY_FAILED:
+ recover_failed_callback(port_id);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+int
+register_eth_event_callback(void)
+{
+ int ret;
+ enum rte_eth_event_type event;
+
+ for (event = RTE_ETH_EVENT_UNKNOWN;
+ event < RTE_ETH_EVENT_MAX; event++) {
+ ret = rte_eth_dev_callback_register(RTE_ETH_ALL,
+ event,
+ eth_event_callback,
+ NULL);
+ if (ret != 0) {
+ TESTPMD_LOG(ERR, "Failed to register callback for "
+ "%s event\n", eth_event_desc[event]);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+int
+unregister_eth_event_callback(void)
+{
+ int ret;
+ enum rte_eth_event_type event;
+
+ for (event = RTE_ETH_EVENT_UNKNOWN;
+ event < RTE_ETH_EVENT_MAX; event++) {
+ ret = rte_eth_dev_callback_unregister(RTE_ETH_ALL,
+ event,
+ eth_event_callback,
+ NULL);
+ if (ret != 0) {
+ TESTPMD_LOG(ERR, "Failed to unregister callback for "
+ "%s event\n", eth_event_desc[event]);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+/* This function is used by the interrupt thread */
+static void
+dev_event_callback(const char *device_name, enum rte_dev_event_type type,
+ __rte_unused void *arg)
+{
+ uint16_t port_id;
+ int ret;
+
+ if (type >= RTE_DEV_EVENT_MAX) {
+ fprintf(stderr, "%s called upon invalid event %d\n",
+ __func__, type);
+ fflush(stderr);
+ }
+
+ switch (type) {
+ case RTE_DEV_EVENT_REMOVE:
+ RTE_LOG(DEBUG, EAL, "The device: %s has been removed!\n",
+ device_name);
+ ret = rte_eth_dev_get_port_by_name(device_name, &port_id);
+ if (ret) {
+ RTE_LOG(ERR, EAL, "can not get port by device %s!\n",
+ device_name);
+ return;
+ }
+ /*
+ * Because the user's callback is invoked in eal interrupt
+ * callback, the interrupt callback need to be finished before
+ * it can be unregistered when detaching device. So finish
+ * callback soon and use a deferred removal to detach device
+ * is need. It is a workaround, once the device detaching be
+ * moved into the eal in the future, the deferred removal could
+ * be deleted.
+ */
+ if (rte_eal_alarm_set(100000,
+ rmv_port_callback, (void *)(intptr_t)port_id))
+ RTE_LOG(ERR, EAL,
+ "Could not set up deferred device removal\n");
+ break;
+ case RTE_DEV_EVENT_ADD:
+ RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
+ device_name);
+ /* TODO: After finish kernel driver binding,
+ * begin to attach port.
+ */
+ break;
+ default:
+ break;
+ }
+}
+
+int
+register_dev_event_callback(void)
+{
+ int ret;
+
+ ret = rte_dev_event_callback_register(NULL,
+ dev_event_callback, NULL);
+ if (ret != 0) {
+ RTE_LOG(ERR, EAL,
+ "fail to register device event callback\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+int
+unregister_dev_event_callback(void)
+{
+ int ret;
+
+ ret = rte_dev_event_callback_unregister(NULL,
+ dev_event_callback, NULL);
+ if (ret < 0) {
+ RTE_LOG(ERR, EAL,
+ "fail to unregister device event callback.\n");
+ return -1;
+ }
+
+ return 0;
+}
@@ -14,6 +14,7 @@ sources = files(
'cmd_flex_item.c',
'config.c',
'csumonly.c',
+ 'event.c',
'flowgen.c',
'icmpecho.c',
'ieee1588fwd.c',
@@ -434,45 +434,19 @@ static int
parse_event_printing_config(const char *optarg, int enable)
{
uint32_t mask = 0;
+ int ret;
- if (!strcmp(optarg, "unknown"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN;
- else if (!strcmp(optarg, "intr_lsc"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC;
- else if (!strcmp(optarg, "queue_state"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE;
- else if (!strcmp(optarg, "intr_reset"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET;
- else if (!strcmp(optarg, "vf_mbox"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_VF_MBOX;
- else if (!strcmp(optarg, "ipsec"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_IPSEC;
- else if (!strcmp(optarg, "macsec"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_MACSEC;
- else if (!strcmp(optarg, "intr_rmv"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV;
- else if (!strcmp(optarg, "dev_probed"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
- else if (!strcmp(optarg, "dev_released"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
- else if (!strcmp(optarg, "flow_aged"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
- else if (!strcmp(optarg, "err_recovering"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_ERR_RECOVERING;
- else if (!strcmp(optarg, "recovery_success"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_SUCCESS;
- else if (!strcmp(optarg, "recovery_failed"))
- mask = UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_FAILED;
- else if (!strcmp(optarg, "all"))
- mask = ~UINT32_C(0);
- else {
+ ret = get_event_name_mask(optarg, &mask);
+ if (ret != 0) {
fprintf(stderr, "Invalid event: %s\n", optarg);
return -1;
}
+
if (enable)
event_print_mask |= mask;
else
event_print_mask &= ~mask;
+
return 0;
}
@@ -434,41 +434,6 @@ uint8_t clear_ptypes = true;
/* Hairpin ports configuration mode. */
uint32_t hairpin_mode;
-/* Pretty printing of ethdev events */
-static const char * const eth_event_desc[] = {
- [RTE_ETH_EVENT_UNKNOWN] = "unknown",
- [RTE_ETH_EVENT_INTR_LSC] = "link state change",
- [RTE_ETH_EVENT_QUEUE_STATE] = "queue state",
- [RTE_ETH_EVENT_INTR_RESET] = "reset",
- [RTE_ETH_EVENT_VF_MBOX] = "VF mbox",
- [RTE_ETH_EVENT_IPSEC] = "IPsec",
- [RTE_ETH_EVENT_MACSEC] = "MACsec",
- [RTE_ETH_EVENT_INTR_RMV] = "device removal",
- [RTE_ETH_EVENT_NEW] = "device probed",
- [RTE_ETH_EVENT_DESTROY] = "device released",
- [RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
- [RTE_ETH_EVENT_RX_AVAIL_THRESH] = "RxQ available descriptors threshold reached",
- [RTE_ETH_EVENT_ERR_RECOVERING] = "error recovering",
- [RTE_ETH_EVENT_RECOVERY_SUCCESS] = "error recovery successful",
- [RTE_ETH_EVENT_RECOVERY_FAILED] = "error recovery failed",
- [RTE_ETH_EVENT_MAX] = NULL,
-};
-
-/*
- * Display or mask ether events
- * Default to all events except VF_MBOX
- */
-uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
- (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
- (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
- (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
- (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
- (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
- (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV) |
- (UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED) |
- (UINT32_C(1) << RTE_ETH_EVENT_ERR_RECOVERING) |
- (UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_SUCCESS) |
- (UINT32_C(1) << RTE_ETH_EVENT_RECOVERY_FAILED);
/*
* Decide if all memory are locked for performance.
*/
@@ -700,12 +665,6 @@ eth_dev_set_mtu_mp(uint16_t port_id, uint16_t mtu)
/* Forward function declarations */
static void setup_attached_port(portid_t pi);
static void check_all_ports_link_status(uint32_t port_mask);
-static int eth_event_callback(portid_t port_id,
- enum rte_eth_event_type type,
- void *param, void *ret_param);
-static void dev_event_callback(const char *device_name,
- enum rte_dev_event_type type,
- void *param);
static void fill_xstats_display_info(void);
/*
@@ -3671,7 +3630,7 @@ setup_attached_port(portid_t pi)
printf("Done\n");
}
-static void
+void
detach_device(struct rte_device *dev)
{
portid_t sibling;
@@ -3817,13 +3776,9 @@ pmd_test_exit(void)
return;
}
- ret = rte_dev_event_callback_unregister(NULL,
- dev_event_callback, NULL);
- if (ret < 0) {
- RTE_LOG(ERR, EAL,
- "fail to unregister device event callback.\n");
+ ret = unregister_dev_event_callback();
+ if (ret != 0)
return;
- }
ret = rte_dev_hotplug_handle_disable();
if (ret) {
@@ -3908,274 +3863,6 @@ check_all_ports_link_status(uint32_t port_mask)
}
}
-static void
-rmv_port_callback(void *arg)
-{
- int need_to_start = 0;
- int org_no_link_check = no_link_check;
- portid_t port_id = (intptr_t)arg;
- struct rte_eth_dev_info dev_info;
- int ret;
-
- RTE_ETH_VALID_PORTID_OR_RET(port_id);
-
- if (!test_done && port_is_forwarding(port_id)) {
- need_to_start = 1;
- stop_packet_forwarding();
- }
- no_link_check = 1;
- stop_port(port_id);
- no_link_check = org_no_link_check;
-
- ret = eth_dev_info_get_print_err(port_id, &dev_info);
- if (ret != 0)
- TESTPMD_LOG(ERR,
- "Failed to get device info for port %d, not detaching\n",
- port_id);
- else {
- struct rte_device *device = dev_info.device;
- close_port(port_id);
- detach_device(device); /* might be already removed or have more ports */
- }
- if (need_to_start)
- start_packet_forwarding(0);
-}
-
-static int need_start_when_recovery_over;
-
-static bool
-has_port_in_err_recovering(void)
-{
- struct rte_port *port;
- portid_t pid;
-
- RTE_ETH_FOREACH_DEV(pid) {
- port = &ports[pid];
- if (port->err_recovering)
- return true;
- }
-
- return false;
-}
-
-static void
-err_recovering_callback(portid_t port_id)
-{
- if (!has_port_in_err_recovering())
- printf("Please stop executing any commands until recovery result events are received!\n");
-
- ports[port_id].err_recovering = 1;
- ports[port_id].recover_failed = 0;
-
- /* To simplify implementation, stop forwarding regardless of whether the port is used. */
- if (!test_done) {
- printf("Stop packet forwarding because some ports are in error recovering!\n");
- stop_packet_forwarding();
- need_start_when_recovery_over = 1;
- }
-}
-
-static void
-recover_success_callback(portid_t port_id)
-{
- ports[port_id].err_recovering = 0;
- if (has_port_in_err_recovering())
- return;
-
- if (need_start_when_recovery_over) {
- printf("Recovery success! Restart packet forwarding!\n");
- start_packet_forwarding(0);
- need_start_when_recovery_over = 0;
- } else {
- printf("Recovery success!\n");
- }
-}
-
-static void
-recover_failed_callback(portid_t port_id)
-{
- struct rte_port *port;
- portid_t pid;
-
- ports[port_id].err_recovering = 0;
- ports[port_id].recover_failed = 1;
- if (has_port_in_err_recovering())
- return;
-
- need_start_when_recovery_over = 0;
- printf("The ports:");
- RTE_ETH_FOREACH_DEV(pid) {
- port = &ports[pid];
- if (port->recover_failed)
- printf(" %u", pid);
- }
- printf(" recovery failed! Please remove them!\n");
-}
-
-/* This function is used by the interrupt thread */
-static int
-eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
- void *ret_param)
-{
- RTE_SET_USED(param);
- RTE_SET_USED(ret_param);
-
- if (type >= RTE_ETH_EVENT_MAX) {
- fprintf(stderr,
- "\nPort %" PRIu16 ": %s called upon invalid event %d\n",
- port_id, __func__, type);
- fflush(stderr);
- } else if (event_print_mask & (UINT32_C(1) << type)) {
- printf("\nPort %" PRIu16 ": %s event\n", port_id,
- eth_event_desc[type]);
- fflush(stdout);
- }
-
- switch (type) {
- case RTE_ETH_EVENT_NEW:
- ports[port_id].need_setup = 1;
- ports[port_id].port_status = RTE_PORT_HANDLING;
- break;
- case RTE_ETH_EVENT_INTR_RMV:
- if (port_id_is_invalid(port_id, DISABLED_WARN))
- break;
- if (rte_eal_alarm_set(100000,
- rmv_port_callback, (void *)(intptr_t)port_id))
- fprintf(stderr,
- "Could not set up deferred device removal\n");
- break;
- case RTE_ETH_EVENT_DESTROY:
- ports[port_id].port_status = RTE_PORT_CLOSED;
- printf("Port %u is closed\n", port_id);
- break;
- case RTE_ETH_EVENT_RX_AVAIL_THRESH: {
- uint16_t rxq_id;
- int ret;
-
- /* avail_thresh query API rewinds rxq_id, no need to check max RxQ num */
- for (rxq_id = 0; ; rxq_id++) {
- ret = rte_eth_rx_avail_thresh_query(port_id, &rxq_id,
- NULL);
- if (ret <= 0)
- break;
- printf("Received avail_thresh event, port: %u, rxq_id: %u\n",
- port_id, rxq_id);
-
-#ifdef RTE_NET_MLX5
- mlx5_test_avail_thresh_event_handler(port_id, rxq_id);
-#endif
- }
- break;
- }
- case RTE_ETH_EVENT_ERR_RECOVERING:
- err_recovering_callback(port_id);
- break;
- case RTE_ETH_EVENT_RECOVERY_SUCCESS:
- recover_success_callback(port_id);
- break;
- case RTE_ETH_EVENT_RECOVERY_FAILED:
- recover_failed_callback(port_id);
- break;
- default:
- break;
- }
- return 0;
-}
-
-static int
-register_eth_event_callback(void)
-{
- int ret;
- enum rte_eth_event_type event;
-
- for (event = RTE_ETH_EVENT_UNKNOWN;
- event < RTE_ETH_EVENT_MAX; event++) {
- ret = rte_eth_dev_callback_register(RTE_ETH_ALL,
- event,
- eth_event_callback,
- NULL);
- if (ret != 0) {
- TESTPMD_LOG(ERR, "Failed to register callback for "
- "%s event\n", eth_event_desc[event]);
- return -1;
- }
- }
-
- return 0;
-}
-
-static int
-unregister_eth_event_callback(void)
-{
- int ret;
- enum rte_eth_event_type event;
-
- for (event = RTE_ETH_EVENT_UNKNOWN;
- event < RTE_ETH_EVENT_MAX; event++) {
- ret = rte_eth_dev_callback_unregister(RTE_ETH_ALL,
- event,
- eth_event_callback,
- NULL);
- if (ret != 0) {
- TESTPMD_LOG(ERR, "Failed to unregister callback for "
- "%s event\n", eth_event_desc[event]);
- return -1;
- }
- }
-
- return 0;
-}
-
-/* This function is used by the interrupt thread */
-static void
-dev_event_callback(const char *device_name, enum rte_dev_event_type type,
- __rte_unused void *arg)
-{
- uint16_t port_id;
- int ret;
-
- if (type >= RTE_DEV_EVENT_MAX) {
- fprintf(stderr, "%s called upon invalid event %d\n",
- __func__, type);
- fflush(stderr);
- }
-
- switch (type) {
- case RTE_DEV_EVENT_REMOVE:
- RTE_LOG(DEBUG, EAL, "The device: %s has been removed!\n",
- device_name);
- ret = rte_eth_dev_get_port_by_name(device_name, &port_id);
- if (ret) {
- RTE_LOG(ERR, EAL, "can not get port by device %s!\n",
- device_name);
- return;
- }
- /*
- * Because the user's callback is invoked in eal interrupt
- * callback, the interrupt callback need to be finished before
- * it can be unregistered when detaching device. So finish
- * callback soon and use a deferred removal to detach device
- * is need. It is a workaround, once the device detaching be
- * moved into the eal in the future, the deferred removal could
- * be deleted.
- */
- if (rte_eal_alarm_set(100000,
- rmv_port_callback, (void *)(intptr_t)port_id))
- RTE_LOG(ERR, EAL,
- "Could not set up deferred device removal\n");
- break;
- case RTE_DEV_EVENT_ADD:
- RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
- device_name);
- /* TODO: After finish kernel driver binding,
- * begin to attach port.
- */
- break;
- default:
- break;
- }
-}
-
static void
rxtx_port_config(portid_t pid)
{
@@ -4724,13 +4411,9 @@ main(int argc, char** argv)
return -1;
}
- ret = rte_dev_event_callback_register(NULL,
- dev_event_callback, NULL);
- if (ret) {
- RTE_LOG(ERR, EAL,
- "fail to register device event callback\n");
+ ret = register_dev_event_callback();
+ if (ret != 0)
return -1;
- }
}
if (!no_device_start && start_port(RTE_PORT_ALL) != 0) {
@@ -1109,6 +1109,11 @@ void set_nb_pkt_per_burst(uint16_t pkt_burst);
char *list_pkt_forwarding_modes(void);
char *list_pkt_forwarding_retry_modes(void);
void set_pkt_forwarding_mode(const char *fwd_mode);
+int get_event_name_mask(const char *name, uint32_t *mask);
+int register_eth_event_callback(void);
+int unregister_eth_event_callback(void);
+int register_dev_event_callback(void);
+int unregister_dev_event_callback(void);
void start_packet_forwarding(int with_tx_first);
void fwd_stats_display(void);
void fwd_stats_reset(void);
@@ -1128,6 +1133,7 @@ void stop_port(portid_t pid);
void close_port(portid_t pid);
void reset_port(portid_t pid);
void attach_port(char *identifier);
+void detach_device(struct rte_device *dev);
void detach_devargs(char *identifier);
void detach_port_device(portid_t port_id);
int all_ports_stopped(void);