[v7,7/7] dts: add pmd_buffer_scatter test suite
Checks
Commit Message
From: Jeremy Spewock <jspewock@iol.unh.edu>
This test suite provides testing of the support of scattered packets by
Poll Mode Drivers using testpmd, verifying the ability to receive and
transmit scattered multi-segment packets made up of multiple
non-contiguous memory buffers. This is tested through 5 different cases
in which the length of the packets sent are less than the mbuf size,
equal to the mbuf size, and 1, 4, and 5 bytes greater than the mbuf size
in order to show both the CRC and the packet data are capable of
existing in the first, second, or both buffers.
Naturally, if the PMD is capable of forwarding scattered packets which
it receives as input, this shows it is capable of both receiving and
transmitting scattered packets.
Signed-off-by: Jeremy Spewock <jspewock@iol.unh.edu>
---
dts/tests/TestSuite_pmd_buffer_scatter.py | 132 ++++++++++++++++++++++
1 file changed, 132 insertions(+)
create mode 100644 dts/tests/TestSuite_pmd_buffer_scatter.py
Comments
<snip>
> + def test_scatter_mbuf_2048(self) -> None:
> + """Run the pmd_scatter test with `mbsize` set to 2048."""
I've used a shortcut, I liked the reference :-). Looking at it, it
could be simplified using :meth:
"""Run the :meth:`pmd_scatter` test with `mbsize` set to 2048."""
On Wed, Jan 10, 2024 at 8:16 AM Juraj Linkeš <juraj.linkes@pantheon.tech>
wrote:
> <snip>
>
> > + def test_scatter_mbuf_2048(self) -> None:
> > + """Run the pmd_scatter test with `mbsize` set to 2048."""
>
> I've used a shortcut, I liked the reference :-). Looking at it, it
> could be simplified using :meth:
> """Run the :meth:`pmd_scatter` test with `mbsize` set to 2048."""
>
My mistake, I took it too literally. I'll update this.
new file mode 100644
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2023-2024 University of New Hampshire
+
+"""Multi-segment packet scattering testing suite.
+
+This testing suite tests the support of transmitting and receiving scattered packets. This is shown
+by the Poll Mode Driver being able to forward scattered multi-segment packets composed of multiple
+non-contiguous memory buffers. To ensure the receipt of scattered packets, the DMA rings of the
+port's RX queues must be configured with mbuf data buffers whose size is less than the maximum
+length.
+
+If it is the case that the Poll Mode Driver can forward scattered packets which it receives, then
+this suffices to show the Poll Mode Driver is capable of both receiving and transmitting scattered
+packets.
+"""
+
+import struct
+
+from scapy.layers.inet import IP # type: ignore[import]
+from scapy.layers.l2 import Ether # type: ignore[import]
+from scapy.packet import Raw # type: ignore[import]
+from scapy.utils import hexstr # type: ignore[import]
+
+from framework.remote_session.testpmd_shell import TestPmdForwardingModes, TestPmdShell
+from framework.test_suite import TestSuite
+
+
+class PmdBufferScatter(TestSuite):
+ """DPDK PMD packet scattering test suite.
+
+ Configure the Rx queues to have mbuf data buffers whose sizes are smaller than the maximum
+ packet size. Specifically, set mbuf data buffers to have a size of 2048 to fit a full 1512-byte
+ (CRC included) ethernet frame in a mono-segment packet. The testing of scattered packets is
+ done by sending a packet whose length is greater than the size of the configured size of mbuf
+ data buffers. There are a total of 5 packets sent within test cases which have lengths less
+ than, equal to, and greater than the mbuf size. There are multiple packets sent with lengths
+ greater than the mbuf size in order to test cases such as:
+
+ 1. A single byte of the CRC being in a second buffer while the remaining 3 bytes are stored in
+ the first buffer alongside packet data.
+ 2. The entire CRC being stored in a second buffer while all of the packet data is stored in the
+ first.
+ 3. Most of the packet data being stored in the first buffer and a single byte of packet data
+ stored in a second buffer alongside the CRC.
+ """
+
+ def set_up_suite(self) -> None:
+ """Set up the test suite.
+
+ Setup:
+ Verify that we have at least 2 port links in the current execution and increase the MTU
+ of both ports on the traffic generator to 9000 to support larger packet sizes.
+ """
+ self.verify(
+ len(self._port_links) > 1,
+ "There must be at least two port links to run the scatter test suite",
+ )
+
+ self.tg_node.main_session.configure_port_mtu(9000, self._tg_port_egress)
+ self.tg_node.main_session.configure_port_mtu(9000, self._tg_port_ingress)
+
+ def scatter_pktgen_send_packet(self, pktsize: int) -> str:
+ """Generate and send a packet to the SUT then capture what is forwarded back.
+
+ Generate an IP packet of a specific length and send it to the SUT, then capture the
+ resulting received packet and extract its payload. The desired length of the packet is met
+ by packing its payload with the letter "X" in hexadecimal.
+
+ Args:
+ pktsize: Size of the packet to generate and send.
+
+ Returns:
+ The payload of the received packet as a string.
+ """
+ packet = Ether() / IP() / Raw()
+ packet.getlayer(2).load = ""
+ payload_len = pktsize - len(packet) - 4
+ payload = ["58"] * payload_len
+ # pack the payload
+ for X_in_hex in payload:
+ packet.load += struct.pack("=B", int("%s%s" % (X_in_hex[0], X_in_hex[1]), 16))
+ received_packets = self.send_packet_and_capture(packet)
+ self.verify(len(received_packets) > 0, "Did not receive any packets.")
+ load = hexstr(received_packets[0].getlayer(2), onlyhex=1)
+
+ return load
+
+ def pmd_scatter(self, mbsize: int) -> None:
+ """Testpmd support of receiving and sending scattered multi-segment packets.
+
+ Support for scattered packets is shown by sending 5 packets of differing length
+ where the length of the packet is calculated by taking mbuf-size + an offset. The
+ offsets used in the test are -1, 0, 1, 4, 5 respectively.
+
+ Test:
+ Start testpmd and run functional test with preset mbsize.
+ """
+ testpmd = self.sut_node.create_interactive_shell(
+ TestPmdShell,
+ app_parameters=(
+ "--mbcache=200 "
+ f"--mbuf-size={mbsize} "
+ "--max-pkt-len=9000 "
+ "--port-topology=paired "
+ "--tx-offloads=0x00008000"
+ ),
+ privileged=True,
+ )
+ testpmd.set_forward_mode(TestPmdForwardingModes.mac)
+ testpmd.start()
+
+ for offset in [-1, 0, 1, 4, 5]:
+ recv_payload = self.scatter_pktgen_send_packet(mbsize + offset)
+ self._logger.debug(f"Payload of scattered packet after forwarding: \n{recv_payload}")
+ self.verify(
+ ("58 " * 8).strip() in recv_payload,
+ f"Payload of scattered packet did not match expected payload with offset {offset}.",
+ )
+ testpmd.stop()
+
+ def test_scatter_mbuf_2048(self) -> None:
+ """Run the pmd_scatter test with `mbsize` set to 2048."""
+ self.pmd_scatter(mbsize=2048)
+
+ def tear_down_suite(self) -> None:
+ """Tear down the test suite.
+
+ Teardown:
+ Set the MTU of the tg_node back to a more standard size of 1500
+ """
+ self.tg_node.main_session.configure_port_mtu(1500, self._tg_port_egress)
+ self.tg_node.main_session.configure_port_mtu(1500, self._tg_port_ingress)