@@ -1,19 +1,17 @@
.. SPDX-License-Identifier: BSD-3-Clause
Copyright(c) 2020 Intel Corporation
-Intel(R) ACC100 and ACC101 5G/4G FEC Poll Mode Drivers
+Intel(R) ACC100 5G/4G FEC Poll Mode Drivers
======================================================
The BBDEV ACC100 5G/4G FEC poll mode driver (PMD) supports an
implementation of a VRAN FEC wireless acceleration function.
This device is also known as Mount Bryce.
-The BBDEV ACC101, also known as Mount Cirrus, is a derivative device from Mount Bryce
-with functional and capacity improvements but still with the same exposed BBDEV capabilities.
Features
--------
-ACC100 and ACC101 5G/4G FEC PMDs support the following features:
+ACC100 5G/4G FEC PMDs support the following features:
- LDPC Encode in the DL (5GNR)
- LDPC Decode in the UL (5GNR)
@@ -25,7 +23,7 @@ ACC100 and ACC101 5G/4G FEC PMDs support the following features:
- MSI
- SR-IOV
-ACC100 and ACC101 5G/4G FEC PMDs support the following BBDEV capabilities:
+ACC100 5G/4G FEC PMDs support the following BBDEV capabilities:
* For the LDPC encode operation:
- ``RTE_BBDEV_LDPC_CRC_24B_ATTACH`` : set to attach CRC24B to CB(s)
@@ -94,12 +92,11 @@ Initialization
--------------
When the device first powers up, its PCI Physical Functions (PF) can be listed through these
-commands for ACC100 (device id ``0d5c``) and ACC101 (device id ``57c4``) respectively:
+commands for ACC100:
.. code-block:: console
sudo lspci -vd8086:0d5c
- sudo lspci -vd8086:57c4
The physical and virtual functions are compatible with Linux UIO drivers:
``vfio_pci`` and ``igb_uio``. However, in order to work the 5G/4G
@@ -157,10 +154,3 @@ Specifically for the BBDEV ACC100 PMD, the command below can be used:
./pf_bb_config ACC100 -c acc100/acc100_config_vf_5g.cfg
./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_default.data
-
-Specifically for the BBDEV ACC101 PMD, the command below can be used:
-
-.. code-block:: console
-
- ./pf_bb_config ACC101 -c acc101/acc101_config_2vf_4g5g.cfg
- ./test-bbdev.py -e="-c 0xff0 -a${VF_PCI_ADDR}" -c validation -n 64 -b 32 -l 1 -v ./ldpc_dec_default.data
@@ -68,6 +68,7 @@ Removed Items
Also, make sure to start the actual text at the margin.
=======================================================
+* acc101: Removed obsolete code for non productized HW variant.
API Changes
-----------
@@ -23,14 +23,11 @@
#define rte_bbdev_log_debug(fmt, ...)
#endif
-#define ACC100_VARIANT 0
-#define ACC101_VARIANT 1
-
/* ACC100 PF and VF driver names */
#define ACC100PF_DRIVER_NAME intel_acc100_pf
#define ACC100VF_DRIVER_NAME intel_acc100_vf
-/* ACC100 PCI vendor & device IDs */
+/* ACC PCI vendor & device IDs */
#define ACC100_VENDOR_ID (0x8086)
#define ACC100_PF_DEVICE_ID (0x0d5c)
#define ACC100_VF_DEVICE_ID (0x0d5d)
deleted file mode 100644
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: BSD-3-Clause
- * Copyright(c) 2022 Intel Corporation
- */
-
-/* ACC101 PCI vendor & device IDs */
-#define ACC101_VENDOR_ID (0x8086)
-#define ACC101_PF_DEVICE_ID (0x57c4)
-#define ACC101_VF_DEVICE_ID (0x57c5)
-
-/* Number of Virtual Functions ACC101 supports */
-#define ACC101_NUM_VFS 16
-#define ACC101_NUM_QGRPS 8
-#define ACC101_NUM_AQS 16
-
-#define ACC101_WORDS_IN_ARAM_SIZE (128 * 1024 / 4)
-
-/* Mapping of signals for the available engines */
-#define ACC101_SIG_UL_5G 0
-#define ACC101_SIG_UL_5G_LAST 8
-#define ACC101_SIG_DL_5G 13
-#define ACC101_SIG_DL_5G_LAST 15
-#define ACC101_SIG_UL_4G 16
-#define ACC101_SIG_UL_4G_LAST 19
-#define ACC101_SIG_DL_4G 27
-#define ACC101_SIG_DL_4G_LAST 31
-#define ACC101_NUM_ACCS 5
-
-/* ACC101 Configuration */
-#define ACC101_CFG_DMA_ERROR 0x3D7
-#define ACC101_CFG_AXI_CACHE 0x11
-#define ACC101_CFG_QMGR_HI_P 0x0F0F
-#define ACC101_CFG_PCI_AXI 0xC003
-#define ACC101_CFG_PCI_BRIDGE 0x40006033
-#define ACC101_GPEX_AXIMAP_NUM 17
-#define ACC101_CLOCK_GATING_EN 0x30000
-#define ACC101_DMA_INBOUND 0x104
-/* DDR Size per VF - 512MB by default
- * Can be increased up to 4 GB with single PF/VF
- */
-#define ACC101_HARQ_DDR (512 * 1)
@@ -19,7 +19,6 @@
#include <rte_bbdev.h>
#include <rte_bbdev_pmd.h>
#include "acc100_pmd.h"
-#include "acc101_pmd.h"
#include "vrb_cfg.h"
#ifdef RTE_BBDEV_SDK_AVX512
@@ -1100,9 +1099,6 @@ static struct rte_pci_id pci_id_acc100_pf_map[] = {
{
RTE_PCI_DEVICE(ACC100_VENDOR_ID, ACC100_PF_DEVICE_ID),
},
- {
- RTE_PCI_DEVICE(ACC101_VENDOR_ID, ACC101_PF_DEVICE_ID),
- },
{.device_id = 0},
};
@@ -1111,9 +1107,6 @@ static struct rte_pci_id pci_id_acc100_vf_map[] = {
{
RTE_PCI_DEVICE(ACC100_VENDOR_ID, ACC100_VF_DEVICE_ID),
},
- {
- RTE_PCI_DEVICE(ACC101_VENDOR_ID, ACC101_VF_DEVICE_ID),
- },
{.device_id = 0},
};
@@ -1329,126 +1322,6 @@ acc100_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc_fcw_ld *fcw,
}
}
-/* Fill in a frame control word for LDPC decoding for ACC101 */
-static inline void
-acc101_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc_fcw_ld *fcw,
- union acc_harq_layout_data *harq_layout)
-{
- uint16_t harq_out_length, harq_in_length, ncb_p, k0_p, parity_offset;
- uint32_t harq_index;
- uint32_t l;
-
- fcw->qm = op->ldpc_dec.q_m;
- fcw->nfiller = op->ldpc_dec.n_filler;
- fcw->BG = (op->ldpc_dec.basegraph - 1);
- fcw->Zc = op->ldpc_dec.z_c;
- fcw->ncb = op->ldpc_dec.n_cb;
- fcw->k0 = get_k0(fcw->ncb, fcw->Zc, op->ldpc_dec.basegraph,
- op->ldpc_dec.rv_index);
- if (op->ldpc_dec.code_block_mode == RTE_BBDEV_CODE_BLOCK)
- fcw->rm_e = op->ldpc_dec.cb_params.e;
- else
- fcw->rm_e = (op->ldpc_dec.tb_params.r <
- op->ldpc_dec.tb_params.cab) ?
- op->ldpc_dec.tb_params.ea :
- op->ldpc_dec.tb_params.eb;
-
- if (unlikely(check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE) &&
- (op->ldpc_dec.harq_combined_input.length == 0))) {
- rte_bbdev_log(WARNING, "Null HARQ input size provided");
- /* Disable HARQ input in that case to carry forward */
- op->ldpc_dec.op_flags ^= RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE;
- }
- if (unlikely(fcw->rm_e == 0)) {
- rte_bbdev_log(WARNING, "Null E input provided");
- fcw->rm_e = 2;
- }
-
- fcw->hcin_en = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE);
- fcw->hcout_en = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE);
- fcw->crc_select = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK);
- fcw->bypass_dec = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_DECODE_BYPASS);
- fcw->bypass_intlv = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_DEINTERLEAVER_BYPASS);
- if (op->ldpc_dec.q_m == 1) {
- fcw->bypass_intlv = 1;
- fcw->qm = 2;
- }
- fcw->hcin_decomp_mode = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
- fcw->hcout_comp_mode = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION);
- fcw->llr_pack_mode = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_LLR_COMPRESSION);
- harq_index = hq_index(op->ldpc_dec.harq_combined_output.offset);
- if (fcw->hcin_en > 0) {
- harq_in_length = op->ldpc_dec.harq_combined_input.length;
- if (fcw->hcin_decomp_mode > 0)
- harq_in_length = harq_in_length * 8 / 6;
- harq_in_length = RTE_MIN(harq_in_length, op->ldpc_dec.n_cb
- - op->ldpc_dec.n_filler);
- /* Alignment on next 64B - Already enforced from HC output */
- harq_in_length = RTE_ALIGN_FLOOR(harq_in_length, ACC_HARQ_ALIGN_64B);
- fcw->hcin_size0 = harq_in_length;
- fcw->hcin_offset = 0;
- fcw->hcin_size1 = 0;
- } else {
- fcw->hcin_size0 = 0;
- fcw->hcin_offset = 0;
- fcw->hcin_size1 = 0;
- }
-
- fcw->itmax = op->ldpc_dec.iter_max;
- fcw->itstop = check_bit(op->ldpc_dec.op_flags,
- RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE);
- fcw->synd_precoder = fcw->itstop;
- /*
- * These are all implicitly set
- * fcw->synd_post = 0;
- * fcw->so_en = 0;
- * fcw->so_bypass_rm = 0;
- * fcw->so_bypass_intlv = 0;
- * fcw->dec_convllr = 0;
- * fcw->hcout_convllr = 0;
- * fcw->hcout_size1 = 0;
- * fcw->so_it = 0;
- * fcw->hcout_offset = 0;
- * fcw->negstop_th = 0;
- * fcw->negstop_it = 0;
- * fcw->negstop_en = 0;
- * fcw->gain_i = 1;
- * fcw->gain_h = 1;
- */
- if (fcw->hcout_en > 0) {
- parity_offset = (op->ldpc_dec.basegraph == 1 ? 20 : 8)
- * op->ldpc_dec.z_c - op->ldpc_dec.n_filler;
- k0_p = (fcw->k0 > parity_offset) ?
- fcw->k0 - op->ldpc_dec.n_filler : fcw->k0;
- ncb_p = fcw->ncb - op->ldpc_dec.n_filler;
- l = RTE_MIN(k0_p + fcw->rm_e, INT16_MAX);
- harq_out_length = (uint16_t) fcw->hcin_size0;
- harq_out_length = RTE_MAX(harq_out_length, l);
- /* Cannot exceed the pruned Ncb circular buffer */
- harq_out_length = RTE_MIN(harq_out_length, ncb_p);
- /* Alignment on next 64B */
- harq_out_length = RTE_ALIGN_CEIL(harq_out_length, ACC_HARQ_ALIGN_64B);
- fcw->hcout_size0 = harq_out_length;
- fcw->hcout_size1 = 0;
- fcw->hcout_offset = 0;
- harq_layout[harq_index].offset = fcw->hcout_offset;
- harq_layout[harq_index].size0 = fcw->hcout_size0;
- } else {
- fcw->hcout_size0 = 0;
- fcw->hcout_size1 = 0;
- fcw->hcout_offset = 0;
- }
-}
-
/* May need to pad LDPC Encoder input to avoid small beat for ACC100. */
static inline uint16_t
pad_le_in(uint16_t blen, struct acc_queue *q)
@@ -4302,9 +4175,6 @@ acc100_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
(pci_dev->id.device_id == ACC100_VF_DEVICE_ID)) {
((struct acc_device *) dev->data->dev_private)->device_variant = ACC100_VARIANT;
((struct acc_device *) dev->data->dev_private)->fcw_ld_fill = acc100_fcw_ld_fill;
- } else {
- ((struct acc_device *) dev->data->dev_private)->device_variant = ACC101_VARIANT;
- ((struct acc_device *) dev->data->dev_private)->fcw_ld_fill = acc101_fcw_ld_fill;
}
((struct acc_device *) dev->data->dev_private)->pf_device =
@@ -4930,299 +4800,6 @@ acc100_configure(const char *dev_name, struct rte_acc_conf *conf)
return 0;
}
-
-/* Initial configuration of a ACC101 device prior to running configure() */
-static int
-acc101_configure(const char *dev_name, struct rte_acc_conf *conf)
-{
- rte_bbdev_log(INFO, "rte_acc101_configure");
- uint32_t value, address, status;
- int qg_idx, template_idx, vf_idx, acc, i;
- struct rte_bbdev *bbdev = rte_bbdev_get_named_dev(dev_name);
-
- /* Compile time checks */
- RTE_BUILD_BUG_ON(sizeof(struct acc_dma_req_desc) != 256);
- RTE_BUILD_BUG_ON(sizeof(union acc_dma_desc) != 256);
- RTE_BUILD_BUG_ON(sizeof(struct acc_fcw_td) != 24);
- RTE_BUILD_BUG_ON(sizeof(struct acc_fcw_te) != 32);
-
- if (bbdev == NULL) {
- rte_bbdev_log(ERR,
- "Invalid dev_name (%s), or device is not yet initialised",
- dev_name);
- return -ENODEV;
- }
- struct acc_device *d = bbdev->data->dev_private;
-
- /* Store configuration */
- rte_memcpy(&d->acc_conf, conf, sizeof(d->acc_conf));
-
- /* PCIe Bridge configuration */
- acc_reg_write(d, HwPfPcieGpexBridgeControl, ACC101_CFG_PCI_BRIDGE);
- for (i = 1; i < ACC101_GPEX_AXIMAP_NUM; i++)
- acc_reg_write(d, HwPfPcieGpexAxiAddrMappingWindowPexBaseHigh + i * 16, 0);
-
- /* Prevent blocking AXI read on BRESP for AXI Write */
- address = HwPfPcieGpexAxiPioControl;
- value = ACC101_CFG_PCI_AXI;
- acc_reg_write(d, address, value);
-
- /* Explicitly releasing AXI including a 2ms delay on ACC101 */
- usleep(2000);
- acc_reg_write(d, HWPfDmaAxiControl, 1);
-
- /* Set the default 5GDL DMA configuration */
- acc_reg_write(d, HWPfDmaInboundDrainDataSize, ACC101_DMA_INBOUND);
-
- /* Enable granular dynamic clock gating */
- address = HWPfHiClkGateHystReg;
- value = ACC101_CLOCK_GATING_EN;
- acc_reg_write(d, address, value);
-
- /* Set default descriptor signature */
- address = HWPfDmaDescriptorSignatuture;
- value = 0;
- acc_reg_write(d, address, value);
-
- /* Enable the Error Detection in DMA */
- value = ACC101_CFG_DMA_ERROR;
- address = HWPfDmaErrorDetectionEn;
- acc_reg_write(d, address, value);
-
- /* AXI Cache configuration */
- value = ACC101_CFG_AXI_CACHE;
- address = HWPfDmaAxcacheReg;
- acc_reg_write(d, address, value);
-
- /* Default DMA Configuration (Qmgr Enabled) */
- address = HWPfDmaConfig0Reg;
- value = 0;
- acc_reg_write(d, address, value);
- address = HWPfDmaQmanen;
- value = 0;
- acc_reg_write(d, address, value);
-
- /* Default RLIM/ALEN configuration */
- address = HWPfDmaConfig1Reg;
- int alen_r = 0xF;
- int alen_w = 0x7;
- value = (1 << 31) + (alen_w << 20) + (1 << 6) + alen_r;
- acc_reg_write(d, address, value);
-
- /* Configure DMA Qmanager addresses */
- address = HWPfDmaQmgrAddrReg;
- value = HWPfQmgrEgressQueuesTemplate;
- acc_reg_write(d, address, value);
-
- /* ===== Qmgr Configuration ===== */
- /* Configuration of the AQueue Depth QMGR_GRP_0_DEPTH_LOG2 for UL */
- int totalQgs = conf->q_ul_4g.num_qgroups +
- conf->q_ul_5g.num_qgroups +
- conf->q_dl_4g.num_qgroups +
- conf->q_dl_5g.num_qgroups;
- for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
- address = HWPfQmgrDepthLog2Grp +
- ACC_BYTES_IN_WORD * qg_idx;
- value = aqDepth(qg_idx, conf);
- acc_reg_write(d, address, value);
- address = HWPfQmgrTholdGrp +
- ACC_BYTES_IN_WORD * qg_idx;
- value = (1 << 16) + (1 << (aqDepth(qg_idx, conf) - 1));
- acc_reg_write(d, address, value);
- }
-
- /* Template Priority in incremental order */
- for (template_idx = 0; template_idx < ACC_NUM_TMPL;
- template_idx++) {
- address = HWPfQmgrGrpTmplateReg0Indx + ACC_BYTES_IN_WORD * template_idx;
- value = ACC_TMPL_PRI_0;
- acc_reg_write(d, address, value);
- address = HWPfQmgrGrpTmplateReg1Indx + ACC_BYTES_IN_WORD * template_idx;
- value = ACC_TMPL_PRI_1;
- acc_reg_write(d, address, value);
- address = HWPfQmgrGrpTmplateReg2indx + ACC_BYTES_IN_WORD * template_idx;
- value = ACC_TMPL_PRI_2;
- acc_reg_write(d, address, value);
- address = HWPfQmgrGrpTmplateReg3Indx + ACC_BYTES_IN_WORD * template_idx;
- value = ACC_TMPL_PRI_3;
- acc_reg_write(d, address, value);
- }
-
- address = HWPfQmgrGrpPriority;
- value = ACC101_CFG_QMGR_HI_P;
- acc_reg_write(d, address, value);
-
- /* Template Configuration */
- for (template_idx = 0; template_idx < ACC_NUM_TMPL;
- template_idx++) {
- value = 0;
- address = HWPfQmgrGrpTmplateReg4Indx
- + ACC_BYTES_IN_WORD * template_idx;
- acc_reg_write(d, address, value);
- }
- /* 4GUL */
- int numQgs = conf->q_ul_4g.num_qgroups;
- int numQqsAcc = 0;
- value = 0;
- for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
- value |= (1 << qg_idx);
- for (template_idx = ACC101_SIG_UL_4G;
- template_idx <= ACC101_SIG_UL_4G_LAST;
- template_idx++) {
- address = HWPfQmgrGrpTmplateReg4Indx
- + ACC_BYTES_IN_WORD * template_idx;
- acc_reg_write(d, address, value);
- }
- /* 5GUL */
- numQqsAcc += numQgs;
- numQgs = conf->q_ul_5g.num_qgroups;
- value = 0;
- int numEngines = 0;
- for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
- value |= (1 << qg_idx);
- for (template_idx = ACC101_SIG_UL_5G;
- template_idx <= ACC101_SIG_UL_5G_LAST;
- template_idx++) {
- /* Check engine power-on status */
- address = HwPfFecUl5gIbDebugReg +
- ACC_ENGINE_OFFSET * template_idx;
- status = (acc_reg_read(d, address) >> 4) & 0xF;
- address = HWPfQmgrGrpTmplateReg4Indx
- + ACC_BYTES_IN_WORD * template_idx;
- if (status == 1) {
- acc_reg_write(d, address, value);
- numEngines++;
- } else
- acc_reg_write(d, address, 0);
- }
- rte_bbdev_log(INFO, "Number of 5GUL engines %d", numEngines);
- /* 4GDL */
- numQqsAcc += numQgs;
- numQgs = conf->q_dl_4g.num_qgroups;
- value = 0;
- for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
- value |= (1 << qg_idx);
- for (template_idx = ACC101_SIG_DL_4G;
- template_idx <= ACC101_SIG_DL_4G_LAST;
- template_idx++) {
- address = HWPfQmgrGrpTmplateReg4Indx
- + ACC_BYTES_IN_WORD * template_idx;
- acc_reg_write(d, address, value);
- }
- /* 5GDL */
- numQqsAcc += numQgs;
- numQgs = conf->q_dl_5g.num_qgroups;
- value = 0;
- for (qg_idx = numQqsAcc; qg_idx < (numQgs + numQqsAcc); qg_idx++)
- value |= (1 << qg_idx);
- for (template_idx = ACC101_SIG_DL_5G;
- template_idx <= ACC101_SIG_DL_5G_LAST;
- template_idx++) {
- address = HWPfQmgrGrpTmplateReg4Indx
- + ACC_BYTES_IN_WORD * template_idx;
- acc_reg_write(d, address, value);
- }
-
- /* Queue Group Function mapping */
- int qman_func_id[8] = {0, 2, 1, 3, 4, 0, 0, 0};
- address = HWPfQmgrGrpFunction0;
- value = 0;
- for (qg_idx = 0; qg_idx < 8; qg_idx++) {
- acc = accFromQgid(qg_idx, conf);
- value |= qman_func_id[acc]<<(qg_idx * 4);
- }
- acc_reg_write(d, address, value);
-
- /* Configuration of the Arbitration QGroup depth to 1 */
- for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
- address = HWPfQmgrArbQDepthGrp +
- ACC_BYTES_IN_WORD * qg_idx;
- value = 0;
- acc_reg_write(d, address, value);
- }
-
- /* Enabling AQueues through the Queue hierarchy*/
- for (vf_idx = 0; vf_idx < ACC101_NUM_VFS; vf_idx++) {
- for (qg_idx = 0; qg_idx < ACC101_NUM_QGRPS; qg_idx++) {
- value = 0;
- if (vf_idx < conf->num_vf_bundles &&
- qg_idx < totalQgs)
- value = (1 << aqNum(qg_idx, conf)) - 1;
- address = HWPfQmgrAqEnableVf
- + vf_idx * ACC_BYTES_IN_WORD;
- value += (qg_idx << 16);
- acc_reg_write(d, address, value);
- }
- }
-
- /* This pointer to ARAM (128kB) is shifted by 2 (4B per register) */
- uint32_t aram_address = 0;
- for (qg_idx = 0; qg_idx < totalQgs; qg_idx++) {
- for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
- address = HWPfQmgrVfBaseAddr + vf_idx
- * ACC_BYTES_IN_WORD + qg_idx
- * ACC_BYTES_IN_WORD * 64;
- value = aram_address;
- acc_reg_write(d, address, value);
- /* Offset ARAM Address for next memory bank
- * - increment of 4B
- */
- aram_address += aqNum(qg_idx, conf) *
- (1 << aqDepth(qg_idx, conf));
- }
- }
-
- if (aram_address > ACC101_WORDS_IN_ARAM_SIZE) {
- rte_bbdev_log(ERR, "ARAM Configuration not fitting %d %d\n",
- aram_address, ACC101_WORDS_IN_ARAM_SIZE);
- return -EINVAL;
- }
-
- /* ==== HI Configuration ==== */
-
- /* No Info Ring/MSI by default */
- acc_reg_write(d, HWPfHiInfoRingIntWrEnRegPf, 0);
- acc_reg_write(d, HWPfHiInfoRingVf2pfLoWrEnReg, 0);
- acc_reg_write(d, HWPfHiCfgMsiIntWrEnRegPf, 0xFFFFFFFF);
- acc_reg_write(d, HWPfHiCfgMsiVf2pfLoWrEnReg, 0xFFFFFFFF);
- /* Prevent Block on Transmit Error */
- address = HWPfHiBlockTransmitOnErrorEn;
- value = 0;
- acc_reg_write(d, address, value);
- /* Prevents to drop MSI */
- address = HWPfHiMsiDropEnableReg;
- value = 0;
- acc_reg_write(d, address, value);
- /* Set the PF Mode register */
- address = HWPfHiPfMode;
- value = (conf->pf_mode_en) ? ACC_PF_VAL : 0;
- acc_reg_write(d, address, value);
- /* Explicitly releasing AXI after PF Mode and 2 ms */
- usleep(2000);
- acc_reg_write(d, HWPfDmaAxiControl, 1);
-
- /* QoS overflow init */
- value = 1;
- address = HWPfQosmonAEvalOverflow0;
- acc_reg_write(d, address, value);
- address = HWPfQosmonBEvalOverflow0;
- acc_reg_write(d, address, value);
-
- /* HARQ DDR Configuration */
- unsigned int ddrSizeInMb = ACC101_HARQ_DDR;
- for (vf_idx = 0; vf_idx < conf->num_vf_bundles; vf_idx++) {
- address = HWPfDmaVfDdrBaseRw + vf_idx
- * 0x10;
- value = ((vf_idx * (ddrSizeInMb / 64)) << 16) +
- (ddrSizeInMb - 1);
- acc_reg_write(d, address, value);
- }
- usleep(ACC_LONG_WAIT);
-
- rte_bbdev_log_debug("PF TIP configuration complete for %s", dev_name);
- return 0;
-}
-
int
rte_acc_configure(const char *dev_name, struct rte_acc_conf *conf)
{
@@ -5236,8 +4813,6 @@ rte_acc_configure(const char *dev_name, struct rte_acc_conf *conf)
rte_bbdev_log(INFO, "Configure dev id %x", pci_dev->id.device_id);
if (pci_dev->id.device_id == ACC100_PF_DEVICE_ID)
return acc100_configure(dev_name, conf);
- else if (pci_dev->id.device_id == ACC101_PF_DEVICE_ID)
- return acc101_configure(dev_name, conf);
else if (pci_dev->id.device_id == VRB1_PF_DEVICE_ID)
return vrb1_configure(dev_name, conf);
else if (pci_dev->id.device_id == VRB2_PF_DEVICE_ID)