[v4,2/7] ethdev: add telemetry cmd for registers

Message ID 20240226030739.3775514-3-haijie1@huawei.com (mailing list archive)
State Superseded, archived
Delegated to: Ferruh Yigit
Headers
Series support dump reigser names and filter them |

Checks

Context Check Description
ci/checkpatch success coding style OK

Commit Message

Jie Hai Feb. 26, 2024, 3:07 a.m. UTC
  This patch adds a telemetry command for registers dump,
and supports get registers with specified names.
The length of the string exported by telemetry is limited
by MAX_OUTPUT_LEN. Therefore, the filter should be more
precise.

An example usage is shown below:
--> /ethdev/regs,0,INTR
{
  "/ethdev/regs": {
    "registers_length": 318,
    "registers_width": 4,
    "register_offset": "0x0",
    "version": "0x1140011",
    "group_0": {
      "HNS3_CMDQ_INTR_STS_REG": "0x0",
      "HNS3_CMDQ_INTR_EN_REG": "0x2",
      "HNS3_CMDQ_INTR_GEN_REG": "0x0",
      "queue_0_HNS3_TQP_INTR_CTRL_REG": "0x0",
      "queue_0_HNS3_TQP_INTR_GL0_REG": "0xa",
      "queue_0_HNS3_TQP_INTR_GL1_REG": "0xa",
      "queue_0_HNS3_TQP_INTR_GL2_REG": "0x0",
      ...
      },
    "group_1": {
        ...
    },
    ...
}

or as below if the number of registers not exceed the
RTE_TEL_MAX_DICT_ENTRIES:
--> /ethdev/regs,0,ppp
{
  "/ethdev/regs": {
    "registers_length": 156,
    "registers_width": 4,
    "register_offset": "0x0",
    "version": "0x1140011",
    "ppp_key_drop_num": "0x0",
    "ppp_rlt_drop_num": "0x0",
    "ssu_ppp_mac_key_num_l": "0x1",
    "ssu_ppp_mac_key_num_h": "0x0",
    "ssu_ppp_host_key_num_l": "0x1",
    "ssu_ppp_host_key_num_h": "0x0",
    "ppp_ssu_mac_rlt_num_l": "0x1",
        ...
   }
}

Signed-off-by: Jie Hai <haijie1@huawei.com>
---
 lib/ethdev/rte_ethdev_telemetry.c | 126 ++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)
  

Comments

Chengwen Feng Feb. 26, 2024, 9:09 a.m. UTC | #1
Hi Jie,

On 2024/2/26 11:07, Jie Hai wrote:
> This patch adds a telemetry command for registers dump,
> and supports get registers with specified names.
> The length of the string exported by telemetry is limited
> by MAX_OUTPUT_LEN. Therefore, the filter should be more
> precise.
> 
> An example usage is shown below:
> --> /ethdev/regs,0,INTR
> {
>   "/ethdev/regs": {
>     "registers_length": 318,
>     "registers_width": 4,
>     "register_offset": "0x0",
>     "version": "0x1140011",
>     "group_0": {
>       "HNS3_CMDQ_INTR_STS_REG": "0x0",
>       "HNS3_CMDQ_INTR_EN_REG": "0x2",
>       "HNS3_CMDQ_INTR_GEN_REG": "0x0",
>       "queue_0_HNS3_TQP_INTR_CTRL_REG": "0x0",
>       "queue_0_HNS3_TQP_INTR_GL0_REG": "0xa",
>       "queue_0_HNS3_TQP_INTR_GL1_REG": "0xa",
>       "queue_0_HNS3_TQP_INTR_GL2_REG": "0x0",
>       ...
>       },
>     "group_1": {
>         ...
>     },
>     ...
> }
> 
> or as below if the number of registers not exceed the
> RTE_TEL_MAX_DICT_ENTRIES:
> --> /ethdev/regs,0,ppp
> {
>   "/ethdev/regs": {
>     "registers_length": 156,
>     "registers_width": 4,
>     "register_offset": "0x0",
>     "version": "0x1140011",
>     "ppp_key_drop_num": "0x0",
>     "ppp_rlt_drop_num": "0x0",
>     "ssu_ppp_mac_key_num_l": "0x1",
>     "ssu_ppp_mac_key_num_h": "0x0",
>     "ssu_ppp_host_key_num_l": "0x1",
>     "ssu_ppp_host_key_num_h": "0x0",
>     "ppp_ssu_mac_rlt_num_l": "0x1",
>         ...
>    }
> }
> 
> Signed-off-by: Jie Hai <haijie1@huawei.com>
> ---
>  lib/ethdev/rte_ethdev_telemetry.c | 126 ++++++++++++++++++++++++++++++
>  1 file changed, 126 insertions(+)
> 
> diff --git a/lib/ethdev/rte_ethdev_telemetry.c b/lib/ethdev/rte_ethdev_telemetry.c
> index 6b873e7abe68..f1ebb2fae632 100644
> --- a/lib/ethdev/rte_ethdev_telemetry.c
> +++ b/lib/ethdev/rte_ethdev_telemetry.c
> @@ -5,6 +5,7 @@
>  #include <ctype.h>
>  #include <stdlib.h>
>  
> +#include <rte_malloc.h>
>  #include <rte_kvargs.h>
>  #include <rte_telemetry.h>
>  
> @@ -1395,6 +1396,129 @@ eth_dev_handle_port_tm_node_caps(const char *cmd __rte_unused,
>  	return ret;
>  }
>  
> +static int
> +eth_dev_store_regs(struct rte_tel_data *d, struct rte_dev_reg_info *reg_info)
> +{
> +	struct rte_tel_data *groups[RTE_TEL_MAX_DICT_ENTRIES] = {NULL};

no need zero.

> +	char group_name[RTE_TEL_MAX_STRING_LEN] = {0};
> +	struct rte_tel_data *group = NULL;
> +	uint32_t grp_num = 0;
> +	uint32_t *data;
> +	int ret = 0;
> +	uint32_t i;
> +
> +	rte_tel_data_start_dict(d);
> +	rte_tel_data_add_dict_uint(d, "register_length", reg_info->length);
> +	rte_tel_data_add_dict_uint(d, "register_width", reg_info->width);
> +	rte_tel_data_add_dict_uint_hex(d, "register_offset", reg_info->offset, 0);
> +	rte_tel_data_add_dict_uint_hex(d, "version", reg_info->version, 0);
> +
> +	data = reg_info->data;
> +	if (reg_info->length <= RTE_TEL_MAX_DICT_ENTRIES) {
> +		for (i = 0; i < reg_info->length; i++, data++)
> +			rte_tel_data_add_dict_uint_hex(d,
> +				reg_info->names[i].name, *data, 0);

The above format is OK for reg_info->width==4.
There maybe reg_info->width == 8, pls support it.

> +		return 0;
> +	}
> +
> +	for (i = 0; i < reg_info->length; i++, data++) {
> +		if (i % RTE_TEL_MAX_DICT_ENTRIES == 0) {
> +			if (i != 0)
> +				rte_tel_data_add_dict_container(d, group_name,
> +								group, 0);
> +
> +			group = rte_tel_data_alloc();
> +			if (group == NULL) {
> +				ret = -ENOMEM;
> +				goto out;
> +			}
> +			rte_tel_data_start_dict(group);
> +			snprintf(group_name, RTE_TEL_MAX_STRING_LEN,
> +					"group_%u", grp_num);

grp_num + 1 ?

> +			if (grp_num >= RTE_TEL_MAX_DICT_ENTRIES) {
> +				RTE_ETHDEV_LOG_LINE(NOTICE,
> +					"Too many regs, please filter");

how about add more descrip: stop format!

> +				return 0;

this group's memory was leak.

How about move the extream case before for loop:

uint32_t length = reg_info->lenght;
if (length > RTE_TEL_MAX_DICT_ENTRIES * RTE_TEL_MAX_DICT_ENTRIES) {
    LOG(xxx);
    length = RTE_TEL_MAX_DICT_ENTRIES * RTE_TEL_MAX_DICT_ENTRIES;
}

> +			}
> +			groups[grp_num++] = group;
> +		}
> +		rte_tel_data_add_dict_uint_hex(group, reg_info->names[i].name,
> +						*data, 0);
> +	}
> +	if (i % RTE_TEL_MAX_DICT_ENTRIES != 0)
> +		rte_tel_data_add_dict_container(d, group_name, group, 0);

how about move all add dict in here.
for (i = 0; i < grp_num; i++) {
    snprintf(group_name, xxx);
    rte_tel_data_add_dict_container(d, group_name, group[i], 0);
}

> +
> +	return 0;
> +out:
> +	for (i = 0; i < grp_num; i++)
> +		rte_tel_data_free(groups[i]);
> +
> +	return ret;
> +}
> +
> +static int
> +eth_dev_get_port_regs(int port_id, struct rte_tel_data *d, char *filter)
> +{
> +	struct rte_dev_reg_info reg_info;
> +	int ret;
> +
> +	memset(&reg_info, 0, sizeof(reg_info));
> +	reg_info.filter = filter;
> +
> +	ret = rte_eth_dev_get_reg_info_ext(port_id, &reg_info);
> +	if (ret != 0) {
> +		RTE_ETHDEV_LOG_LINE(ERR,
> +			"Error getting device reg info: %d", ret);
> +		return ret;
> +	}
> +
> +	reg_info.data = calloc(reg_info.length, reg_info.width);
> +	if (!reg_info.data)

pls use if (reg_info.data == NULL), and add error log

> +		return -ENOMEM;
> +
> +	reg_info.names = calloc(reg_info.length, sizeof(struct rte_eth_reg_name));
> +	if (!reg_info.names) {

pls use if (reg_info.names == NULL), and add error log

> +		free(reg_info.data);
> +		return -ENOMEM;
> +	}
> +
> +	ret = rte_eth_dev_get_reg_info_ext(port_id, &reg_info);
> +	if (ret != 0) {
> +		RTE_ETHDEV_LOG_LINE(ERR,
> +			"Error getting regs from device: %d", ret);
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	ret = eth_dev_store_regs(d, &reg_info);
> +out:
> +	free(reg_info.data);
> +	free(reg_info.names);
> +
> +	return ret;
> +}
> +
> +static int
> +eth_dev_handle_port_regs(const char *cmd __rte_unused,
> +		const char *params,
> +		struct rte_tel_data *d)
> +{
> +	char *filter = NULL;
> +	uint16_t port_id;
> +	char *end_param;
> +	int ret;
> +
> +	ret = eth_dev_parse_port_params(params, &port_id, &end_param, true);
> +	if (ret != 0)
> +		return ret;
> +
> +	filter = strtok(end_param, ",");
> +	if (filter != NULL && strlen(filter) == 0)
> +		filter = NULL;
> +
> +	return eth_dev_get_port_regs(port_id, d, filter);
> +}
> +
>  RTE_INIT(ethdev_init_telemetry)
>  {
>  	rte_telemetry_register_cmd("/ethdev/list", eth_dev_handle_port_list,
> @@ -1436,4 +1560,6 @@ RTE_INIT(ethdev_init_telemetry)
>  			"Returns TM Level Capabilities info for a port. Parameters: int port_id, int level_id (see tm_capability for the max)");
>  	rte_telemetry_register_cmd("/ethdev/tm_node_capability", eth_dev_handle_port_tm_node_caps,
>  			"Returns TM Node Capabilities info for a port. Parameters: int port_id, int node_id (see tm_capability for the max)");
> +	rte_telemetry_register_cmd("/ethdev/regs", eth_dev_handle_port_regs,
> +			"Returns regs for a port. Parameters: int port_id, string filter");
>  }
>
  
Jie Hai March 6, 2024, 7:18 a.m. UTC | #2
Hi, Chengwen,
Thanks for your review, all will be modified in next version.

Best Regards,
Jie Hai
On 2024/2/26 17:09, fengchengwen wrote:
> Hi Jie,
> 
> On 2024/2/26 11:07, Jie Hai wrote:
>> This patch adds a telemetry command for registers dump,
>> and supports get registers with specified names.
>> The length of the string exported by telemetry is limited
>> by MAX_OUTPUT_LEN. Therefore, the filter should be more
>> precise.
>>
>> An example usage is shown below:
>> --> /ethdev/regs,0,INTR
>> {
>>    "/ethdev/regs": {
>>      "registers_length": 318,
>>      "registers_width": 4,
>>      "register_offset": "0x0",
>>      "version": "0x1140011",
>>      "group_0": {
>>        "HNS3_CMDQ_INTR_STS_REG": "0x0",
>>        "HNS3_CMDQ_INTR_EN_REG": "0x2",
>>        "HNS3_CMDQ_INTR_GEN_REG": "0x0",
>>        "queue_0_HNS3_TQP_INTR_CTRL_REG": "0x0",
>>        "queue_0_HNS3_TQP_INTR_GL0_REG": "0xa",
>>        "queue_0_HNS3_TQP_INTR_GL1_REG": "0xa",
>>        "queue_0_HNS3_TQP_INTR_GL2_REG": "0x0",
>>        ...
>>        },
>>      "group_1": {
>>          ...
>>      },
>>      ...
>> }
>>
>> or as below if the number of registers not exceed the
>> RTE_TEL_MAX_DICT_ENTRIES:
>> --> /ethdev/regs,0,ppp
>> {
>>    "/ethdev/regs": {
>>      "registers_length": 156,
>>      "registers_width": 4,
>>      "register_offset": "0x0",
>>      "version": "0x1140011",
>>      "ppp_key_drop_num": "0x0",
>>      "ppp_rlt_drop_num": "0x0",
>>      "ssu_ppp_mac_key_num_l": "0x1",
>>      "ssu_ppp_mac_key_num_h": "0x0",
>>      "ssu_ppp_host_key_num_l": "0x1",
>>      "ssu_ppp_host_key_num_h": "0x0",
>>      "ppp_ssu_mac_rlt_num_l": "0x1",
>>          ...
>>     }
>> }
>>
>> Signed-off-by: Jie Hai <haijie1@huawei.com>
>> ---
>>   lib/ethdev/rte_ethdev_telemetry.c | 126 ++++++++++++++++++++++++++++++
>>   1 file changed, 126 insertions(+)
>>
>> diff --git a/lib/ethdev/rte_ethdev_telemetry.c b/lib/ethdev/rte_ethdev_telemetry.c
>> index 6b873e7abe68..f1ebb2fae632 100644
>> --- a/lib/ethdev/rte_ethdev_telemetry.c
>> +++ b/lib/ethdev/rte_ethdev_telemetry.c
>> @@ -5,6 +5,7 @@
>>   #include <ctype.h>
>>   #include <stdlib.h>
>>   
>> +#include <rte_malloc.h>
>>   #include <rte_kvargs.h>
>>   #include <rte_telemetry.h>
>>   
>> @@ -1395,6 +1396,129 @@ eth_dev_handle_port_tm_node_caps(const char *cmd __rte_unused,
>>   	return ret;
>>   }
>>   
>> +static int
>> +eth_dev_store_regs(struct rte_tel_data *d, struct rte_dev_reg_info *reg_info)
>> +{
>> +	struct rte_tel_data *groups[RTE_TEL_MAX_DICT_ENTRIES] = {NULL};
> 
> no need zero.
> 
>> +	char group_name[RTE_TEL_MAX_STRING_LEN] = {0};
>> +	struct rte_tel_data *group = NULL;
>> +	uint32_t grp_num = 0;
>> +	uint32_t *data;
>> +	int ret = 0;
>> +	uint32_t i;
>> +
>> +	rte_tel_data_start_dict(d);
>> +	rte_tel_data_add_dict_uint(d, "register_length", reg_info->length);
>> +	rte_tel_data_add_dict_uint(d, "register_width", reg_info->width);
>> +	rte_tel_data_add_dict_uint_hex(d, "register_offset", reg_info->offset, 0);
>> +	rte_tel_data_add_dict_uint_hex(d, "version", reg_info->version, 0);
>> +
>> +	data = reg_info->data;
>> +	if (reg_info->length <= RTE_TEL_MAX_DICT_ENTRIES) {
>> +		for (i = 0; i < reg_info->length; i++, data++)
>> +			rte_tel_data_add_dict_uint_hex(d,
>> +				reg_info->names[i].name, *data, 0);
> 
> The above format is OK for reg_info->width==4.
> There maybe reg_info->width == 8, pls support it.
> 
>> +		return 0;
>> +	}
>> +
>> +	for (i = 0; i < reg_info->length; i++, data++) {
>> +		if (i % RTE_TEL_MAX_DICT_ENTRIES == 0) {
>> +			if (i != 0)
>> +				rte_tel_data_add_dict_container(d, group_name,
>> +								group, 0);
>> +
>> +			group = rte_tel_data_alloc();
>> +			if (group == NULL) {
>> +				ret = -ENOMEM;
>> +				goto out;
>> +			}
>> +			rte_tel_data_start_dict(group);
>> +			snprintf(group_name, RTE_TEL_MAX_STRING_LEN,
>> +					"group_%u", grp_num);
> 
> grp_num + 1 ?
> 
>> +			if (grp_num >= RTE_TEL_MAX_DICT_ENTRIES) {
>> +				RTE_ETHDEV_LOG_LINE(NOTICE,
>> +					"Too many regs, please filter");
> 
> how about add more descrip: stop format!
> 
>> +				return 0;
> 
> this group's memory was leak.
> 
> How about move the extream case before for loop:
> 
> uint32_t length = reg_info->lenght;
> if (length > RTE_TEL_MAX_DICT_ENTRIES * RTE_TEL_MAX_DICT_ENTRIES) {
>      LOG(xxx);
>      length = RTE_TEL_MAX_DICT_ENTRIES * RTE_TEL_MAX_DICT_ENTRIES;
> }
> 
>> +			}
>> +			groups[grp_num++] = group;
>> +		}
>> +		rte_tel_data_add_dict_uint_hex(group, reg_info->names[i].name,
>> +						*data, 0);
>> +	}
>> +	if (i % RTE_TEL_MAX_DICT_ENTRIES != 0)
>> +		rte_tel_data_add_dict_container(d, group_name, group, 0);
> 
> how about move all add dict in here.
> for (i = 0; i < grp_num; i++) {
>      snprintf(group_name, xxx);
>      rte_tel_data_add_dict_container(d, group_name, group[i], 0);
> }
> 
>> +
>> +	return 0;
>> +out:
>> +	for (i = 0; i < grp_num; i++)
>> +		rte_tel_data_free(groups[i]);
>> +
>> +	return ret;
>> +}
>> +
>> +static int
>> +eth_dev_get_port_regs(int port_id, struct rte_tel_data *d, char *filter)
>> +{
>> +	struct rte_dev_reg_info reg_info;
>> +	int ret;
>> +
>> +	memset(&reg_info, 0, sizeof(reg_info));
>> +	reg_info.filter = filter;
>> +
>> +	ret = rte_eth_dev_get_reg_info_ext(port_id, &reg_info);
>> +	if (ret != 0) {
>> +		RTE_ETHDEV_LOG_LINE(ERR,
>> +			"Error getting device reg info: %d", ret);
>> +		return ret;
>> +	}
>> +
>> +	reg_info.data = calloc(reg_info.length, reg_info.width);
>> +	if (!reg_info.data)
> 
> pls use if (reg_info.data == NULL), and add error log
> 
>> +		return -ENOMEM;
>> +
>> +	reg_info.names = calloc(reg_info.length, sizeof(struct rte_eth_reg_name));
>> +	if (!reg_info.names) {
> 
> pls use if (reg_info.names == NULL), and add error log
> 
>> +		free(reg_info.data);
>> +		return -ENOMEM;
>> +	}
>> +
>> +	ret = rte_eth_dev_get_reg_info_ext(port_id, &reg_info);
>> +	if (ret != 0) {
>> +		RTE_ETHDEV_LOG_LINE(ERR,
>> +			"Error getting regs from device: %d", ret);
>> +		ret = -EINVAL;
>> +		goto out;
>> +	}
>> +
>> +	ret = eth_dev_store_regs(d, &reg_info);
>> +out:
>> +	free(reg_info.data);
>> +	free(reg_info.names);
>> +
>> +	return ret;
>> +}
>> +
>> +static int
>> +eth_dev_handle_port_regs(const char *cmd __rte_unused,
>> +		const char *params,
>> +		struct rte_tel_data *d)
>> +{
>> +	char *filter = NULL;
>> +	uint16_t port_id;
>> +	char *end_param;
>> +	int ret;
>> +
>> +	ret = eth_dev_parse_port_params(params, &port_id, &end_param, true);
>> +	if (ret != 0)
>> +		return ret;
>> +
>> +	filter = strtok(end_param, ",");
>> +	if (filter != NULL && strlen(filter) == 0)
>> +		filter = NULL;
>> +
>> +	return eth_dev_get_port_regs(port_id, d, filter);
>> +}
>> +
>>   RTE_INIT(ethdev_init_telemetry)
>>   {
>>   	rte_telemetry_register_cmd("/ethdev/list", eth_dev_handle_port_list,
>> @@ -1436,4 +1560,6 @@ RTE_INIT(ethdev_init_telemetry)
>>   			"Returns TM Level Capabilities info for a port. Parameters: int port_id, int level_id (see tm_capability for the max)");
>>   	rte_telemetry_register_cmd("/ethdev/tm_node_capability", eth_dev_handle_port_tm_node_caps,
>>   			"Returns TM Node Capabilities info for a port. Parameters: int port_id, int node_id (see tm_capability for the max)");
>> +	rte_telemetry_register_cmd("/ethdev/regs", eth_dev_handle_port_regs,
>> +			"Returns regs for a port. Parameters: int port_id, string filter");
>>   }
>>
> .
  

Patch

diff --git a/lib/ethdev/rte_ethdev_telemetry.c b/lib/ethdev/rte_ethdev_telemetry.c
index 6b873e7abe68..f1ebb2fae632 100644
--- a/lib/ethdev/rte_ethdev_telemetry.c
+++ b/lib/ethdev/rte_ethdev_telemetry.c
@@ -5,6 +5,7 @@ 
 #include <ctype.h>
 #include <stdlib.h>
 
+#include <rte_malloc.h>
 #include <rte_kvargs.h>
 #include <rte_telemetry.h>
 
@@ -1395,6 +1396,129 @@  eth_dev_handle_port_tm_node_caps(const char *cmd __rte_unused,
 	return ret;
 }
 
+static int
+eth_dev_store_regs(struct rte_tel_data *d, struct rte_dev_reg_info *reg_info)
+{
+	struct rte_tel_data *groups[RTE_TEL_MAX_DICT_ENTRIES] = {NULL};
+	char group_name[RTE_TEL_MAX_STRING_LEN] = {0};
+	struct rte_tel_data *group = NULL;
+	uint32_t grp_num = 0;
+	uint32_t *data;
+	int ret = 0;
+	uint32_t i;
+
+	rte_tel_data_start_dict(d);
+	rte_tel_data_add_dict_uint(d, "register_length", reg_info->length);
+	rte_tel_data_add_dict_uint(d, "register_width", reg_info->width);
+	rte_tel_data_add_dict_uint_hex(d, "register_offset", reg_info->offset, 0);
+	rte_tel_data_add_dict_uint_hex(d, "version", reg_info->version, 0);
+
+	data = reg_info->data;
+	if (reg_info->length <= RTE_TEL_MAX_DICT_ENTRIES) {
+		for (i = 0; i < reg_info->length; i++, data++)
+			rte_tel_data_add_dict_uint_hex(d,
+				reg_info->names[i].name, *data, 0);
+		return 0;
+	}
+
+	for (i = 0; i < reg_info->length; i++, data++) {
+		if (i % RTE_TEL_MAX_DICT_ENTRIES == 0) {
+			if (i != 0)
+				rte_tel_data_add_dict_container(d, group_name,
+								group, 0);
+
+			group = rte_tel_data_alloc();
+			if (group == NULL) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			rte_tel_data_start_dict(group);
+			snprintf(group_name, RTE_TEL_MAX_STRING_LEN,
+					"group_%u", grp_num);
+			if (grp_num >= RTE_TEL_MAX_DICT_ENTRIES) {
+				RTE_ETHDEV_LOG_LINE(NOTICE,
+					"Too many regs, please filter");
+				return 0;
+			}
+			groups[grp_num++] = group;
+		}
+		rte_tel_data_add_dict_uint_hex(group, reg_info->names[i].name,
+						*data, 0);
+	}
+	if (i % RTE_TEL_MAX_DICT_ENTRIES != 0)
+		rte_tel_data_add_dict_container(d, group_name, group, 0);
+
+	return 0;
+out:
+	for (i = 0; i < grp_num; i++)
+		rte_tel_data_free(groups[i]);
+
+	return ret;
+}
+
+static int
+eth_dev_get_port_regs(int port_id, struct rte_tel_data *d, char *filter)
+{
+	struct rte_dev_reg_info reg_info;
+	int ret;
+
+	memset(&reg_info, 0, sizeof(reg_info));
+	reg_info.filter = filter;
+
+	ret = rte_eth_dev_get_reg_info_ext(port_id, &reg_info);
+	if (ret != 0) {
+		RTE_ETHDEV_LOG_LINE(ERR,
+			"Error getting device reg info: %d", ret);
+		return ret;
+	}
+
+	reg_info.data = calloc(reg_info.length, reg_info.width);
+	if (!reg_info.data)
+		return -ENOMEM;
+
+	reg_info.names = calloc(reg_info.length, sizeof(struct rte_eth_reg_name));
+	if (!reg_info.names) {
+		free(reg_info.data);
+		return -ENOMEM;
+	}
+
+	ret = rte_eth_dev_get_reg_info_ext(port_id, &reg_info);
+	if (ret != 0) {
+		RTE_ETHDEV_LOG_LINE(ERR,
+			"Error getting regs from device: %d", ret);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = eth_dev_store_regs(d, &reg_info);
+out:
+	free(reg_info.data);
+	free(reg_info.names);
+
+	return ret;
+}
+
+static int
+eth_dev_handle_port_regs(const char *cmd __rte_unused,
+		const char *params,
+		struct rte_tel_data *d)
+{
+	char *filter = NULL;
+	uint16_t port_id;
+	char *end_param;
+	int ret;
+
+	ret = eth_dev_parse_port_params(params, &port_id, &end_param, true);
+	if (ret != 0)
+		return ret;
+
+	filter = strtok(end_param, ",");
+	if (filter != NULL && strlen(filter) == 0)
+		filter = NULL;
+
+	return eth_dev_get_port_regs(port_id, d, filter);
+}
+
 RTE_INIT(ethdev_init_telemetry)
 {
 	rte_telemetry_register_cmd("/ethdev/list", eth_dev_handle_port_list,
@@ -1436,4 +1560,6 @@  RTE_INIT(ethdev_init_telemetry)
 			"Returns TM Level Capabilities info for a port. Parameters: int port_id, int level_id (see tm_capability for the max)");
 	rte_telemetry_register_cmd("/ethdev/tm_node_capability", eth_dev_handle_port_tm_node_caps,
 			"Returns TM Node Capabilities info for a port. Parameters: int port_id, int node_id (see tm_capability for the max)");
+	rte_telemetry_register_cmd("/ethdev/regs", eth_dev_handle_port_regs,
+			"Returns regs for a port. Parameters: int port_id, string filter");
 }