@@ -78,6 +78,7 @@ typedef struct port_action_s {
typedef struct adapter_100g_s {
nim_i2c_ctx_t nim_ctx[NUM_ADAPTER_PORTS_MAX]; /* Should be the first field */
+ nthw_gpio_phy_t gpio_phy[NUM_ADAPTER_PORTS_MAX];
} adapter_100g_t;
typedef union adapter_var_s {
@@ -10,13 +10,24 @@
#include "i2c_nim.h"
#include "ntnic_mod_reg.h"
+/*
+ * Check whether a NIM module is present
+ */
+static bool _nim_is_present(nthw_gpio_phy_t *gpio_phy, uint8_t if_no)
+{
+ assert(if_no < NUM_ADAPTER_PORTS_MAX);
+
+ return nthw_gpio_phy_is_module_present(gpio_phy, if_no);
+}
+
/*
* Initialize NIM, Code based on nt200e3_2_ptp.cpp: MyPort::createNim()
*/
-static int _create_nim(adapter_info_t *drv, int port)
+static int _create_nim(adapter_info_t *drv, int port, bool enable)
{
int res = 0;
const uint8_t valid_nim_id = 17U;
+ nthw_gpio_phy_t *gpio_phy;
nim_i2c_ctx_t *nim_ctx;
sfp_nim_state_t nim;
nt4ga_link_t *link_info = &drv->nt4ga_link;
@@ -24,14 +35,43 @@ static int _create_nim(adapter_info_t *drv, int port)
assert(port >= 0 && port < NUM_ADAPTER_PORTS_MAX);
assert(link_info->variables_initialized);
+ gpio_phy = &link_info->u.var100g.gpio_phy[port];
nim_ctx = &link_info->u.var100g.nim_ctx[port];
+ /*
+ * Check NIM is present before doing GPIO PHY reset.
+ */
+ if (!_nim_is_present(gpio_phy, (uint8_t)port)) {
+ NT_LOG(INF, NTNIC, "%s: NIM module is absent\n", drv->mp_port_id_str[port]);
+ return 0;
+ }
+
+ /*
+ * Perform PHY reset.
+ */
+ NT_LOG(DBG, NTNIC, "%s: Performing NIM reset\n", drv->mp_port_id_str[port]);
+ nthw_gpio_phy_set_reset(gpio_phy, (uint8_t)port, true);
+ nt_os_wait_usec(100000);/* pause 0.1s */
+ nthw_gpio_phy_set_reset(gpio_phy, (uint8_t)port, false);
+
/*
* Wait a little after a module has been inserted before trying to access I2C
* data, otherwise the module will not respond correctly.
*/
nt_os_wait_usec(1000000); /* pause 1.0s */
+ if (!_nim_is_present(gpio_phy, (uint8_t)port)) {
+ NT_LOG(DBG, NTNIC, "%s: NIM module is no longer absent!\n",
+ drv->mp_port_id_str[port]);
+ return -1;
+ }
+
+ if (!_nim_is_present(gpio_phy, (uint8_t)port)) {
+ NT_LOG(DBG, NTNIC, "%s: NIM module is no longer absent!\n",
+ drv->mp_port_id_str[port]);
+ return -1;
+ }
+
res = construct_and_preinit_nim(nim_ctx, NULL);
if (res)
@@ -57,6 +97,15 @@ static int _create_nim(adapter_info_t *drv, int port)
return -1;
}
+ if (enable) {
+ NT_LOG(DBG, NTNIC, "%s: De-asserting low power\n", drv->mp_port_id_str[port]);
+ nthw_gpio_phy_set_low_power(gpio_phy, (uint8_t)port, false);
+
+ } else {
+ NT_LOG(DBG, NTNIC, "%s: Asserting low power\n", drv->mp_port_id_str[port]);
+ nthw_gpio_phy_set_low_power(gpio_phy, (uint8_t)port, true);
+ }
+
return res;
}
@@ -89,7 +138,7 @@ static int _port_init(adapter_info_t *drv, int port)
/* Phase 3. Link state machine steps */
/* 3.1) Create NIM, ::createNim() */
- res = _create_nim(drv, port);
+ res = _create_nim(drv, port, true);
if (res) {
NT_LOG(WRN, NTNIC, "%s: NIM initialization failed\n", drv->mp_port_id_str[port]);
@@ -115,6 +164,7 @@ static int _common_ptp_nim_state_machine(void *data)
uint32_t last_lpbk_mode[NUM_ADAPTER_PORTS_MAX];
link_state_t *link_state;
+ nthw_gpio_phy_t *gpio_phy;
if (!fpga) {
NT_LOG(ERR, NTNIC, "%s: fpga is NULL\n", drv->mp_adapter_id_str);
@@ -123,6 +173,7 @@ static int _common_ptp_nim_state_machine(void *data)
assert(adapter_no >= 0 && adapter_no < NUM_ADAPTER_MAX);
link_state = link_info->link_state;
+ gpio_phy = link_info->u.var100g.gpio_phy;
monitor_task_is_running[adapter_no] = 1;
memset(last_lpbk_mode, 0, sizeof(last_lpbk_mode));
@@ -150,7 +201,7 @@ static int _common_ptp_nim_state_machine(void *data)
link_info->link_info[i].link_speed = NT_LINK_SPEED_UNKNOWN;
link_state[i].link_disabled = true;
/* Turn off laser and LED, etc. */
- (void)_create_nim(drv, i);
+ (void)_create_nim(drv, i, false);
NT_LOG(DBG, NTNIC, "%s: Port %i is disabled\n",
drv->mp_port_id_str[i], i);
continue;
@@ -167,7 +218,13 @@ static int _common_ptp_nim_state_machine(void *data)
if (link_info->port_action[i].port_lpbk_mode != last_lpbk_mode[i]) {
/* Loopback mode has changed. Do something */
- _port_init(drv, i);
+ if (!_nim_is_present(&gpio_phy[i], (uint8_t)i)) {
+ /*
+ * If there is no Nim present, we need to initialize the
+ * port anyway
+ */
+ _port_init(drv, i);
+ }
NT_LOG(INF, NTNIC, "%s: Loopback mode changed=%u\n",
drv->mp_port_id_str[i],
@@ -224,6 +281,7 @@ static int nt4ga_link_100g_ports_init(struct adapter_info_s *p_adapter_info, nth
if (res == 0 && !p_adapter_info->nt4ga_link.variables_initialized) {
nim_i2c_ctx_t *nim_ctx = p_adapter_info->nt4ga_link.u.var100g.nim_ctx;
+ nthw_gpio_phy_t *gpio_phy = p_adapter_info->nt4ga_link.u.var100g.gpio_phy;
int i;
for (i = 0; i < nb_ports; i++) {
@@ -239,6 +297,11 @@ static int nt4ga_link_100g_ports_init(struct adapter_info_s *p_adapter_info, nth
nim_ctx[i].devaddr = 0x50; /* 0xA0 / 2 */
nim_ctx[i].regaddr = 0U;
nim_ctx[i].type = I2C_HWIIC;
+
+ res = nthw_gpio_phy_init(&gpio_phy[i], fpga, 0 /* Only one instance */);
+
+ if (res != 0)
+ break;
}
if (res == 0) {
@@ -34,6 +34,7 @@ sources = files(
'nthw/core/nt200a0x/reset/nthw_fpga_rst9563.c',
'nthw/core/nt200a0x/reset/nthw_fpga_rst_nt200a0x.c',
'nthw/core/nthw_fpga.c',
+ 'nthw/core/nthw_gpio_phy.c',
'nthw/core/nthw_hif.c',
'nthw/core/nthw_i2cm.c',
'nthw/core/nthw_iic.c',
@@ -17,6 +17,7 @@
#include "nthw_iic.h"
#include "nthw_i2cm.h"
+#include "nthw_gpio_phy.h"
#include "nthw_sdc.h"
#include "nthw_si5340.h"
new file mode 100644
@@ -0,0 +1,48 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2023 Napatech A/S
+ */
+
+#ifndef NTHW_GPIO_PHY_H_
+#define NTHW_GPIO_PHY_H_
+
+#define GPIO_PHY_INTERFACES (2)
+
+typedef struct {
+ nthw_field_t *cfg_fld_lp_mode; /* Cfg Low Power Mode */
+ nthw_field_t *cfg_int; /* Cfg Port Interrupt */
+ nthw_field_t *cfg_reset;/* Cfg Reset */
+ nthw_field_t *cfg_mod_prs; /* Cfg Module Present */
+ nthw_field_t *cfg_pll_int; /* Cfg PLL Interrupt */
+ nthw_field_t *cfg_port_rxlos; /* Emulate Cfg Port RXLOS */
+
+ nthw_field_t *gpio_fld_lp_mode; /* Gpio Low Power Mode */
+ nthw_field_t *gpio_int; /* Gpio Port Interrupt */
+ nthw_field_t *gpio_reset; /* Gpio Reset */
+ nthw_field_t *gpio_mod_prs; /* Gpio Module Present */
+ nthw_field_t *gpio_pll_int; /* Gpio PLL Interrupt */
+ nthw_field_t *gpio_port_rxlos; /* Emulate Gpio Port RXLOS */
+} gpio_phy_fields_t;
+
+struct nthw_gpio_phy {
+ nthw_fpga_t *mp_fpga;
+ nthw_module_t *mp_mod_gpio_phy;
+ int mn_instance;
+
+ /* Registers */
+ nthw_register_t *mp_reg_config;
+ nthw_register_t *mp_reg_gpio;
+
+ /* Fields */
+ gpio_phy_fields_t mpa_fields[GPIO_PHY_INTERFACES];
+};
+
+typedef struct nthw_gpio_phy nthw_gpio_phy_t;
+
+int nthw_gpio_phy_init(nthw_gpio_phy_t *p, nthw_fpga_t *p_fpga, int n_instance);
+
+bool nthw_gpio_phy_is_module_present(nthw_gpio_phy_t *p, uint8_t if_no);
+void nthw_gpio_phy_set_low_power(nthw_gpio_phy_t *p, uint8_t if_no, bool enable);
+void nthw_gpio_phy_set_reset(nthw_gpio_phy_t *p, uint8_t if_no, bool enable);
+
+#endif /* NTHW_GPIO_PHY_H_ */
new file mode 100644
@@ -0,0 +1,145 @@
+/*
+ * SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2023 Napatech A/S
+ */
+
+#include "ntlog.h"
+#include "nt_util.h"
+
+#include "nthw_drv.h"
+#include "nthw_register.h"
+
+#include "nthw_gpio_phy.h"
+
+int nthw_gpio_phy_init(nthw_gpio_phy_t *p, nthw_fpga_t *p_fpga, int n_instance)
+{
+ nthw_module_t *p_mod = nthw_fpga_query_module(p_fpga, MOD_GPIO_PHY, n_instance);
+
+ if (p == NULL)
+ return p_mod == NULL ? -1 : 0;
+
+ if (p_mod == NULL) {
+ NT_LOG(ERR, NTHW, "%s: GPIO_PHY %d: no such instance\n",
+ p_fpga->p_fpga_info->mp_adapter_id_str, n_instance);
+ return -1;
+ }
+
+ p->mp_fpga = p_fpga;
+ p->mn_instance = n_instance;
+ p->mp_mod_gpio_phy = p_mod;
+
+ /* Registers */
+ p->mp_reg_config = nthw_module_get_register(p->mp_mod_gpio_phy, GPIO_PHY_CFG);
+ p->mp_reg_gpio = nthw_module_get_register(p->mp_mod_gpio_phy, GPIO_PHY_GPIO);
+
+ /* PORT-0, config fields */
+ p->mpa_fields[0].cfg_fld_lp_mode =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT0_LPMODE);
+ p->mpa_fields[0].cfg_int =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT0_INT_B);
+ p->mpa_fields[0].cfg_reset =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT0_RESET_B);
+ p->mpa_fields[0].cfg_mod_prs =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT0_MODPRS_B);
+
+ /* PORT-0, Non-mandatory fields (query_field) */
+ p->mpa_fields[0].cfg_pll_int =
+ nthw_register_query_field(p->mp_reg_config, GPIO_PHY_CFG_PORT0_PLL_INTR);
+ p->mpa_fields[0].cfg_port_rxlos =
+ nthw_register_query_field(p->mp_reg_config, GPIO_PHY_CFG_E_PORT0_RXLOS);
+
+ /* PORT-1, config fields */
+ p->mpa_fields[1].cfg_fld_lp_mode =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT1_LPMODE);
+ p->mpa_fields[1].cfg_int =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT1_INT_B);
+ p->mpa_fields[1].cfg_reset =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT1_RESET_B);
+ p->mpa_fields[1].cfg_mod_prs =
+ nthw_register_get_field(p->mp_reg_config, GPIO_PHY_CFG_PORT1_MODPRS_B);
+
+ /* PORT-1, Non-mandatory fields (query_field) */
+ p->mpa_fields[1].cfg_pll_int =
+ nthw_register_query_field(p->mp_reg_config, GPIO_PHY_CFG_PORT1_PLL_INTR);
+ p->mpa_fields[1].cfg_port_rxlos =
+ nthw_register_query_field(p->mp_reg_config, GPIO_PHY_CFG_E_PORT1_RXLOS);
+
+ /* PORT-0, gpio fields */
+ p->mpa_fields[0].gpio_fld_lp_mode =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT0_LPMODE);
+ p->mpa_fields[0].gpio_int =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT0_INT_B);
+ p->mpa_fields[0].gpio_reset =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT0_RESET_B);
+ p->mpa_fields[0].gpio_mod_prs =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT0_MODPRS_B);
+
+ /* PORT-0, Non-mandatory fields (query_field) */
+ p->mpa_fields[0].gpio_pll_int =
+ nthw_register_query_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT0_PLL_INTR);
+ p->mpa_fields[0].gpio_port_rxlos =
+ nthw_register_query_field(p->mp_reg_gpio, GPIO_PHY_GPIO_E_PORT0_RXLOS);
+
+ /* PORT-1, gpio fields */
+ p->mpa_fields[1].gpio_fld_lp_mode =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT1_LPMODE);
+ p->mpa_fields[1].gpio_int =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT1_INT_B);
+ p->mpa_fields[1].gpio_reset =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT1_RESET_B);
+ p->mpa_fields[1].gpio_mod_prs =
+ nthw_register_get_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT1_MODPRS_B);
+
+ /* PORT-1, Non-mandatory fields (query_field) */
+ p->mpa_fields[1].gpio_pll_int =
+ nthw_register_query_field(p->mp_reg_gpio, GPIO_PHY_GPIO_PORT1_PLL_INTR);
+ p->mpa_fields[1].gpio_port_rxlos =
+ nthw_register_query_field(p->mp_reg_gpio, GPIO_PHY_GPIO_E_PORT1_RXLOS);
+
+ nthw_register_update(p->mp_reg_config);
+
+ return 0;
+}
+
+bool nthw_gpio_phy_is_module_present(nthw_gpio_phy_t *p, uint8_t if_no)
+{
+ if (if_no >= ARRAY_SIZE(p->mpa_fields)) {
+ assert(false);
+ return false;
+ }
+
+ /* NOTE: This is a negated GPIO PIN "MODPRS_B" */
+ return nthw_field_get_updated(p->mpa_fields[if_no].gpio_mod_prs) == 0U ? true : false;
+}
+
+void nthw_gpio_phy_set_low_power(nthw_gpio_phy_t *p, uint8_t if_no, bool enable)
+{
+ if (if_no >= ARRAY_SIZE(p->mpa_fields)) {
+ assert(false);
+ return;
+ }
+
+ if (enable)
+ nthw_field_set_flush(p->mpa_fields[if_no].gpio_fld_lp_mode);
+
+ else
+ nthw_field_clr_flush(p->mpa_fields[if_no].gpio_fld_lp_mode);
+
+ nthw_field_clr_flush(p->mpa_fields[if_no].cfg_fld_lp_mode); /* enable output */
+}
+
+void nthw_gpio_phy_set_reset(nthw_gpio_phy_t *p, uint8_t if_no, bool enable)
+{
+ if (if_no >= ARRAY_SIZE(p->mpa_fields)) {
+ assert(false);
+ return;
+ }
+
+ if (enable)
+ nthw_field_clr_flush(p->mpa_fields[if_no].gpio_reset);
+
+ else
+ nthw_field_set_flush(p->mpa_fields[if_no].gpio_reset);
+
+ nthw_field_clr_flush(p->mpa_fields[if_no].cfg_reset); /* enable output */
+}