[v4,7/7] doc: testpmd support event handling section

diff --git a/doc/guides/testpmd_app_ug/event_handling.rst b/doc/guides/testpmd_app_ug/event_handling.rst
new file mode 100644
index 0000000000..1c39e0c486
--- /dev/null
+++ b/doc/guides/testpmd_app_ug/event_handling.rst
@@ -0,0 +1,81 @@ 
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2023 HiSilicon Limited.
+
+Event Handling
+==============
+
+The ``testpmd`` application supports following two type event handling:
+
+ethdev events
+-------------
+
+The ``testpmd`` provide options "--print-event" and "--mask-event" to control
+whether display such as "Port x y event" when received "y" event on port "x".
+This is named as default processing.
+
+This section details the support events, unless otherwise specified, only the
+default processing is support.
+
+- ``RTE_ETH_EVENT_INTR_LSC``:
+  If device started with lsc enabled, the PMD will launch this event when it
+  detect link status changes.
+
+- ``RTE_ETH_EVENT_QUEUE_STATE``:
+  Used when notify queue state event changed, for example: vhost PMD use this
+  event report whether vring enabled.
+
+- ``RTE_ETH_EVENT_INTR_RESET``:
+  Used to report reset interrupt happened, this event only reported when the
+  PMD supports ``RTE_ETH_ERROR_HANDLE_MODE_PASSIVE``.
+
+- ``RTE_ETH_EVENT_VF_MBOX``:
+  Used as a PF to process mailbox messages of the VFs to which the PF belongs.
+
+- ``RTE_ETH_EVENT_INTR_RMV``:
+  Used to report device removal event. The ``testpmd`` will remove the port
+  later.
+
+- ``RTE_ETH_EVENT_NEW``:
+  Used to report port was probed event. The ``testpmd`` will setup the port
+  later.
+
+- ``RTE_ETH_EVENT_DESTROY``:
+  Used to report port was released event. The ``testpmd`` will changes the
+  port's status.
+
+- ``RTE_ETH_EVENT_MACSEC``:
+  Used to report MACsec offload related event.
+
+- ``RTE_ETH_EVENT_IPSEC``:
+  Used to report IPsec offload related event.
+
+- ``RTE_ETH_EVENT_FLOW_AGED``:
+  Used to report new aged-out flows was detected. Only valid with mlx5 PMD.
+
+- ``RTE_ETH_EVENT_RX_AVAIL_THRESH``:
+  Used to report available Rx descriptors was smaller than the threshold. Only
+  valid with mlx5 PMD.
+
+- ``RTE_ETH_EVENT_ERR_RECOVERING``:
+  Used to report error happened, and PMD will do recover after report this
+  event. The ``testpmd`` will stop packet forwarding when received the event.
+
+- ``RTE_ETH_EVENT_RECOVERY_SUCCESS``:
+  Used to report error recovery success. The ``testpmd`` will restart packet
+  forwarding when received the event.
+
+- ``RTE_ETH_EVENT_RECOVERY_FAILED``:
+  Used to report error recovery failed. The ``testpmd`` will display one
+  message to show which ports failed.
+
+.. note::
+
+   The ``RTE_ETH_EVENT_ERR_RECOVERING``, ``RTE_ETH_EVENT_RECOVERY_SUCCESS`` and
+   ``RTE_ETH_EVENT_RECOVERY_FAILED`` only reported when the PMD supports
+   ``RTE_ETH_ERROR_HANDLE_MODE_PROACTIVE``.
+
+device events
+-------------
+
+Including two events ``RTE_DEV_EVENT_ADD`` and ``RTE_DEV_EVENT_ADD``, and
+enabled only when the ``testpmd`` stated with options "--hot-plug".
diff --git a/doc/guides/testpmd_app_ug/index.rst b/doc/guides/testpmd_app_ug/index.rst
index 1ac0d25d57..3c09448c4e 100644
--- a/doc/guides/testpmd_app_ug/index.rst
+++ b/doc/guides/testpmd_app_ug/index.rst
@@ -14,3 +14,4 @@  Testpmd Application User Guide
     build_app
     run_app
     testpmd_funcs
+    event_handling