@@ -677,10 +677,12 @@ Supports IEEE1588/802.1AS timestamping.
* **[implements] eth_dev_ops**: ``timesync_enable``, ``timesync_disable``
``timesync_read_rx_timestamp``, ``timesync_read_tx_timestamp``,
- ``timesync_adjust_time``, ``timesync_read_time``, ``timesync_write_time``.
+ ``timesync_adjust_time``, ``timesync_adjust_freq``,
+ ``timesync_read_time``, ``timesync_write_time``.
* **[related] API**: ``rte_eth_timesync_enable()``, ``rte_eth_timesync_disable()``,
``rte_eth_timesync_read_rx_timestamp()``,
``rte_eth_timesync_read_tx_timestamp``, ``rte_eth_timesync_adjust_time()``,
+ ``rte_eth_timesync_adjust_freq()``,
``rte_eth_timesync_read_time()``, ``rte_eth_timesync_write_time()``.
@@ -25,35 +25,11 @@ New Features
------------
.. This section should contain new features added in this release.
- Sample format:
- * **Add a title in the past tense with a full stop.**
+* **Added Ethernet device clock incremental rate adjustment.**
- Add a short 1-2 sentence description in the past tense.
- The description should be enough to allow someone scanning
- the release notes to understand the new feature.
-
- If the feature adds a lot of sub-features you can use a bullet list
- like this:
-
- * Added feature foo to do something.
- * Enhanced feature bar to do something else.
-
- Refer to the previous release notes for examples.
-
- Suggested order in release notes items:
- * Core libs (EAL, mempool, ring, mbuf, buses)
- * Device abstraction libs and PMDs (ordered alphabetically by vendor name)
- - ethdev (lib, PMDs)
- - cryptodev (lib, PMDs)
- - eventdev (lib, PMDs)
- - etc
- * Other libs
- * Apps, Examples, Tools (if significant)
-
- This section is a comment. Do not overwrite or remove it.
- Also, make sure to start the actual text at the margin.
- =======================================================
+ Added new function ``rte_eth_timesync_adjust_freq`` to
+ adjust the clock increment rate for Ethernet devices.
Removed Items
@@ -664,6 +664,9 @@ typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
/** @internal Function used to adjust the device clock. */
typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/** @internal Function used to adjust the clock frequency. */
+typedef int (*eth_timesync_adjust_freq)(struct rte_eth_dev *dev, int64_t);
+
/** @internal Function used to get time from the device clock. */
typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
struct timespec *timestamp);
@@ -1378,6 +1381,8 @@ struct eth_dev_ops {
eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
/** Adjust the device clock */
eth_timesync_adjust_time timesync_adjust_time;
+ /** Adjust the clock frequency */
+ eth_timesync_adjust_freq timesync_adjust_freq;
/** Get the device clock time */
eth_timesync_read_time timesync_read_time;
/** Set the device clock time */
@@ -2183,6 +2183,15 @@ RTE_TRACE_POINT_FP(
rte_trace_point_emit_int(ret);
)
+/* Called in loop in examples/ptpclient */
+RTE_TRACE_POINT_FP(
+ rte_eth_trace_timesync_adjust_freq,
+ RTE_TRACE_POINT_ARGS(uint16_t port_id, int64_t ppm, int ret),
+ rte_trace_point_emit_u16(port_id);
+ rte_trace_point_emit_i64(ppm);
+ rte_trace_point_emit_int(ret);
+)
+
/* Called in loop in app/test-flow-perf */
RTE_TRACE_POINT_FP(
rte_flow_trace_create,
@@ -409,6 +409,9 @@ RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_tx_timestamp,
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_time,
lib.ethdev.timesync_adjust_time)
+RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_adjust_freq,
+ lib.ethdev.timesync_adjust_freq)
+
RTE_TRACE_POINT_REGISTER(rte_eth_trace_timesync_read_time,
lib.ethdev.timesync_read_time)
@@ -6310,6 +6310,24 @@ rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta)
return ret;
}
+int
+rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm)
+{
+ struct rte_eth_dev *dev;
+ int ret;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ dev = &rte_eth_devices[port_id];
+
+ if (*dev->dev_ops->timesync_adjust_freq == NULL)
+ return -ENOTSUP;
+ ret = eth_err(port_id, (*dev->dev_ops->timesync_adjust_freq)(dev, ppm));
+
+ rte_eth_trace_timesync_adjust_freq(port_id, ppm, ret);
+
+ return ret;
+}
+
int
rte_eth_timesync_read_time(uint16_t port_id, struct timespec *timestamp)
{
@@ -5297,6 +5297,26 @@ int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
*/
int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
+/**
+ * Adjust the clock increment rate on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ppm
+ * Parts per million with 16-bit fractional field
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -EIO: if device is removed.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+__rte_experimental
+int rte_eth_timesync_adjust_freq(uint16_t port_id, int64_t ppm);
+
/**
* Read the time from the timesync clock on an Ethernet device.
*
@@ -325,6 +325,9 @@ EXPERIMENTAL {
rte_flow_template_table_resizable;
rte_flow_template_table_resize;
rte_flow_template_table_resize_complete;
+
+ # added in 24.11
+ rte_eth_timesync_adjust_freq;
};
INTERNAL {