[v1] test_plans/cvl_advanced_iavf_rss_gtpu: remove gtpogre from gtpu iavf rss
Commit Message
GTPoGRE will have a single test plan for RSS function.
So remove the GTPoGRE from cvl_advanced_iavf_rss_gtpu_test_plan.rst
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Comments
> GTPoGRE will have a single test plan for RSS function.
> So remove the GTPoGRE from cvl_advanced_iavf_rss_gtpu_test_plan.rst
>
> Signed-off-by: Peng Yuan <yuan.peng@intel.com>
Applied, thanks
@@ -260,19 +260,6 @@ run the same test steps as below:
Pattern: outer ipv4 + inner ipv4
--------------------------------
-GTPoGRE is imported in DPDK-21.02.
-The Ptype is parsed same as GTP packet, so they match gtp RSS rule.
-We just need to add the GTPoGRE packet to the packets check.
-we need to add GTPoGRE packet to "basic hit pattern packets",
-"hit pattern/defined input set" and "hit pattern/not defined input set".
-the GTPoGRE packet format in this pattern is to add::
-
- IP(proto=0x2F)/GRE(proto=0x0800)/
-
-after Ether layer, before IP layer, just like::
-
- sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=0x2F)/GRE(proto=0x0800)/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IP(dst="192.168.0.1", src="192.168.0.2")/("X"*480)],iface="enp134s0f0")
-
Test case: MAC_IPV4_GTPU_EH_IPV4 with UL/DL
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
@@ -1974,14 +1961,6 @@ reconfig all the cases of "Pattern: outer ipv4 + inner ipv4"
change the packet's inner L3 layer from IP to IPv6;
change the ipv4 address to ipv6 address.
-the GTPoGRE packet format in this pattern is to add::
-
- IP(proto=0x2F)/GRE(proto=0x0800)/
-
-after Ether layer, before IP layer, just like::
-
- sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=0x2F)/GRE(proto=0x0800)/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IPv6(src="ABAB:910B:6666:3457:8295:3333:1800:2929",dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*480)],iface="enp134s0f0")
-
Pattern: outer ipv6 + inner ipv4
--------------------------------
@@ -1993,14 +1972,6 @@ reconfig all the cases of "Pattern: outer ipv4 + inner ipv4"
packets:
change the packet's outer L3 layer from IP to IPv6;
-the GTPoGRE packet format in this pattern is to add::
-
- IPv6(nh=0x2F)/GRE(proto=0x86dd)/
-
-after Ether layer, before IP layer, just like::
-
- sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=0x2F)/GRE(proto=0x86dd)/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IP(dst="192.168.0.1", src="192.168.0.2")/("X"*480)],iface="enp134s0f0")
-
Pattern: outer ipv6 + inner ipv6
--------------------------------
@@ -2015,13 +1986,6 @@ reconfig all the cases of "Pattern: outer ipv4 + inner ipv4"
change the packet's inner L3 layer from IP to IPv6;
change the ipv4 address to ipv6 address.
-the GTPoGRE packet format in this pattern is to add::
-
- IPv6(nh=0x2F)/GRE(proto=0x86dd)/
-
-after Ether layer, before IP layer, just like::
-
- sendp([Ether(dst="00:11:22:33:44:55")/IPv6(nh=0x2F)/GRE(proto=0x86dd)/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTPPDUSessionContainer(type=0, P=1, QFI=0x34)/IPv6(src="ABAB:910B:6666:3457:8295:3333:1800:2929",dst="CDCD:910A:2222:5498:8475:1111:3900:2020")/("X"*480)],iface="enp134s0f0")
Pattern: MAC_IPV4_GTPU
----------------------
@@ -2957,8 +2921,6 @@ all the test cases run the same test steps as below:
6. send the packet in step 4.
check the received packet has different hash value with which in step 3(including the case has no hash value).
-Note: the GTPoGRE packets need to be added to symmetric cases as a Ptype, just like toeplitz cases.
-
Pattern: symmetric outer ipv4 + inner ipv4
------------------------------------------
@@ -3559,13 +3521,6 @@ toeplitz negative case
inner L4 protocol hash case
===========================
-Note: add two GTPoGRE packets in each subcase with::
-
- IPv6(nh=0x2F)/GRE(proto=0x86dd)/
-
-or::
-
- IP(proto=0x2F)/GRE(proto=0x0800)/
Subcase: MAC_IPV4_GTPU_IPV4_UDP/TCP
-----------------------------------