@@ -2131,13 +2131,14 @@
"I40E_10G-SFP_X722",
"I40E_10G-10G_BASE_T_X722",
"IAVF_10G-X722_VF",
- "I40E_10G-10G_BASE_T_BC"
+ "I40E_10G-10G_BASE_T_BC",
+ "IGC-I225_LM"
],
"Target": [
"ALL"
],
- "Bug ID": "",
- "Comments": "Know dpdk issue, DPDK-2513"
+ "Bug ID": "DPDK-2513, DPDK-30123",
+ "Comments": "the driver not suport this case"
}
],
"multicast_mode": [
@@ -28,7 +28,7 @@ class TestUserspaceEthtool(TestCase):
"""
self.ports = self.dut.get_ports()
self.verify(len(self.ports) >= 2, "No ports found for " + self.nic)
-
+ self.other_700_nic = ["I40E_10G-10G_BASE_T_X722", "I40E_10G-10G_BASE_T_BC"]
# build sample app
out = self.dut.build_dpdk_apps("examples/ethtool")
self.verify("Error" not in out, "compilation error 1")
@@ -263,18 +263,25 @@ class TestUserspaceEthtool(TestCase):
portinfo["net_dev"].bind_driver(portinfo["ori_driver"])
self.dut.send_expect(self.cmd, "EthApp>", 60)
+ for port in self.ports:
+ tester_port = self.tester.get_local_port(port)
+ intf = self.tester.get_interface(tester_port)
+ self.tester.is_interface_up(intf)
# ethtool doesn't support port disconnect by tools of linux
# only detect physical link disconnect status
verify_pass = True
verify_msg = ""
- if not (self.is_eth_series_nic(700) or self.is_eth_series_nic(800)):
+ if not (
+ self.is_eth_series_nic(700)
+ or self.other_700_nic
+ or self.is_eth_series_nic(800)
+ ):
# check link status dump function
for port in self.ports:
tester_port = self.tester.get_local_port(port)
intf = self.tester.get_interface(tester_port)
self.tester.send_expect("ip link set dev %s down" % intf, "# ")
- # wait for link stable
- time.sleep(5)
+ self.tester.is_interface_down(intf)
out = self.dut.send_expect("link", "EthApp>", 60)
link_pattern = r"Port (\d+): (.*)"
@@ -299,8 +306,7 @@ class TestUserspaceEthtool(TestCase):
tester_port = self.tester.get_local_port(port)
intf = self.tester.get_interface(tester_port)
self.tester.send_expect("ip link set dev %s up" % intf, "# ")
- # wait for link stable
- time.sleep(5)
+ self.tester.is_interface_up(intf)
# check port stats function
pkt = Packet(pkt_type="UDP")
@@ -447,12 +453,13 @@ class TestUserspaceEthtool(TestCase):
)
pkt = Packet(pkt_type="UDP")
tester_port = self.tester.get_local_port(port)
+ intf = self.tester.get_interface(tester_port)
+ self.tester.is_interface_up(intf)
self.verify(
self.ethapp_check_link_status(index, "Up") == True,
"Fail to Open port{}".format(index),
)
-
- intf = self.tester.get_interface(tester_port)
+ time.sleep(1)
pkt.send_pkt(self.tester, tx_port=intf, count=4)
rx_pkts, tx_pkts = self.strip_portstats(index)
self.verify(
@@ -512,8 +519,14 @@ class TestUserspaceEthtool(TestCase):
for index in range(len(self.ports)):
port = self.ports[index]
ori_rx_pkts, _ = self.strip_portstats(index)
- # add sleep time for update link status with Intel® Ethernet 700 Series nic
- time.sleep(10)
+ # check port link status is up
+ tester_port = self.tester.get_local_port(port)
+ intf = self.tester.get_interface(tester_port)
+ self.tester.is_interface_up(intf)
+ self.verify(
+ self.ethapp_check_link_status(index, "Up") == True,
+ "Fail to Open port{}".format(index),
+ )
# stop port
self.dut.send_expect("stop %d" % index, "EthApp>")
# about ICE_25G-E810C_SFP(8086:1593),there have a kernel driver link status issue
@@ -530,13 +543,12 @@ class TestUserspaceEthtool(TestCase):
)
# check packet not forwarded when port is stop
pkt = Packet(pkt_type="UDP")
- tester_port = self.tester.get_local_port(port)
- intf = self.tester.get_interface(tester_port)
pkt.send_pkt(self.tester, tx_port=intf, count=4)
rx_pkts, tx_pkts = self.strip_portstats(index)
self.verify(rx_pkts == ori_rx_pkts, "Failed to stop port")
# restart port and check packet can normally forwarded
self.dut.send_expect("open %d" % index, "EthApp>")
+ self.tester.is_interface_up(intf)
self.verify(
self.ethapp_check_link_status(index, "Up") == True,
"Fail to Open port{}".format(index),
@@ -575,7 +587,6 @@ class TestUserspaceEthtool(TestCase):
# Intel® Ethernet 800 Series should stop port before set mtu
if self.nic in ["ICE_25G-E810C_SFP", "ICE_100G-E810C_QSFP"]:
self.dut.send_expect("stop %s" % index, "EthApp>")
-
# The mtu threshold is 2022,When it is greater than 2022, the open/stop port is required.
if mtu > mtu_threshold:
if self.nic in [
@@ -592,7 +603,11 @@ class TestUserspaceEthtool(TestCase):
if self.nic in ["ICE_25G-E810C_SFP", "ICE_100G-E810C_QSFP"]:
self.dut.send_expect("open %s" % index, "EthApp>")
- time.sleep(5)
+ self.tester.is_interface_up(intf)
+ self.verify(
+ self.ethapp_check_link_status(index, "Up") == True,
+ "Fail to Open port{}".format(index),
+ )
ori_rx_pkts, _ = self.strip_portstats(index)
pkt_size = mtu + HEADER_SIZE["eth"] + offset
pkt = Packet(pkt_type="UDP", pkt_len=pkt_size)
@@ -677,9 +692,8 @@ class TestUserspaceEthtool(TestCase):
"""
Run after each test case.
"""
- self.dut.bind_interfaces_linux(self.drivername)
self.dut.kill_all()
- pass
+ self.dut.bind_interfaces_linux(self.drivername)
def tear_down_all(self):
"""