diff mbox series

[V1,2/2] test_plans/kernelpf_iavf: remove 4 duplicated cases from kernelpf_iavf

Message ID 20220609070730.1769-2-weiyuanx.li@intel.com (mailing list archive)
State Accepted
Headers
Series [V1,1/2] tests/kernelpf_iavf: remove 4 duplicated cases from kernelpf_iavf |

Checks

Context Check Description
ci/Intel-dts-doc-test success Testing OK
ci/Intel-dts-format-test success Testing OK
ci/Intel-dts-pylama-test success Testing OK
ci/Intel-dts-suite-test fail Testing issues

Commit Message

Weiyuan Li June 9, 2022, 7:07 a.m. UTC 
  From: Weiyuan Li <weiyuanx.li@intel.com>

Case vf_add_pvid/vf_vlan_rx are duplicated to vf_vlan suite,
vf_hw_checksum_offload/vf_sw_checksum_offload are duplicated to vf_offload suite.
So remove the four cases.

Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
 test_plans/kernelpf_iavf_test_plan.rst | 116 -------------------------
 1 file changed, 116 deletions(-)

Comments

Tu, Lijuan June 15, 2022, 9:18 a.m. UTC | #1 
On Thu,  9 Jun 2022 15:07:30 +0800, "Li, WeiyuanX" <weiyuanx.li@intel.com> wrote:
> From: Weiyuan Li <weiyuanx.li@intel.com>
> 
> Case vf_add_pvid/vf_vlan_rx are duplicated to vf_vlan suite,
> vf_hw_checksum_offload/vf_sw_checksum_offload are duplicated to vf_offload suite.
> So remove the four cases.
> 
> Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>


Series applied, thanks
diff mbox series

Patch

diff --git a/test_plans/kernelpf_iavf_test_plan.rst b/test_plans/kernelpf_iavf_test_plan.rst
index 6f65a529..64261b67 100644
--- a/test_plans/kernelpf_iavf_test_plan.rst
+++ b/test_plans/kernelpf_iavf_test_plan.rst
@@ -188,73 +188,6 @@  Disable VF promisc mode::
 Send packet with broadcast address ff:ff:ff:ff:ff:ff, and check VF can
 receive the packet
 
-
-Test case: add port based vlan on VF
-====================================
-Add pvid on VF0 from PF device::
-
-    ip link set $PF_INTF vf 0 vlan 2
-
-Send packet with same vlan id and check VF can receive
-
-Send packet with wrong vlan id and check VF can't receive
-
-Check PF device shows correct pvid setting::
-
-    ip link show $PF_INTF
-    ...
-    vf 0 MAC 00:01:23:45:67:89, vlan 2, spoof checking on, link-state auto
-
-
-Test case: remove port based vlan on VF
-=======================================
-Remove added vlan from PF device::
-
-    ip link set $PF_INTF vf 0 vlan 0
-
-Start testpmd and send packet without vlan and check VF can receive
-
-Set packet with vlan id 0 and check VF can receive
-
-Set packet with random id 1-4095 and check VF can receive
-
-Check PF device doesn't show pvid setting::
-
-    ip link show $PF_INTF
-
-Test case: VF tagged vlan RX
-============================
-
-Make sure port based vlan disabled on VF0
-
-Start testpmd with rxonly mode::
-
-     testpmd> set fwd rxonly
-     testpmd> set verbose 1
-     testpmd> start
-
-Send packet without vlan and check VF can receive
-
-Send packet with vlan 0 and check VF can receive
-
-Add vlan from VF driver::
-
-     testpmd> rx_vlan add 1 0
-
-Send packet with vlan 1 and check VF can receive
-
-Rerun above with random vlan and max vlan 4095, check VF can't receive
-
-Remove vlan on VF0::
-
-     testpmd> rx_vlan rm 1 0
-
-Send packet with vlan 0 and check VF can receive
-
-Send packet without vlan and check VF can receive
-
-Send packet with vlan 1 and check VF can receive
-
 Test case: VF vlan insertion
 ============================
 
@@ -426,55 +359,6 @@  Send ipv4 packets, check RSS hash value is different::
 
     p=Ether(dst="56:0A:EC:50:A4:28")/IP(src="1.2.3.4")/Raw(load='X'*30)
 
-
-Test case: VF HW checksum offload
-=================================
-
-Enable HW checksum, set csum forward::
-
-    testpmd> port stop all
-    testpmd> csum set ip hw 0
-    testpmd> csum set udp hw 0
-    testpmd> csum set tcp hw 0
-    testpmd> csum set sctp hw 0
-    testpmd> set fwd csum
-    testpmd> set verbose 1
-    testpmd> port start all
-    testpmd> start
-
-Send packets with incorrect checksum to vf port, verify that the packets
-can be received by VF port and checksum error reported,
-the packets forwarded by VF port have the correct checksum value::
-
-    p=Ether()/IP(chksum=0x1234)/UDP()/Raw(load='X'*20)
-    p=Ether()/IP()/TCP(chksum=0x1234)/Raw(load='X'*20)
-    p=Ether()/IP()/UDP(chksum=0x1234)/Raw(load='X'*20)
-
-
-Test case: VF SW checksum offload
-=================================
-
-Enable SW checksum, set csum forward::
-
-    testpmd> port stop all
-    testpmd> csum set ip sw 0
-    testpmd> csum set udp sw 0
-    testpmd> csum set tcp sw 0
-    testpmd> csum set sctp sw 0
-    testpmd> set fwd csum
-    testpmd> set verbose 1
-    testpmd> port start all
-    testpmd> start
-
-Send packets with incorrect checksum to vf port, verify that the packets
-can be received by VF port and checksum error reported, the packets
-forwarded by VF port have the correct checksum value::
-
-    p=Ether()/IP(chksum=0x1234)/UDP()/Raw(load='X'*20)
-    p=Ether()/IP()/TCP(chksum=0x1234)/Raw(load='X'*20)
-    p=Ether()/IP()/UDP(chksum=0x1234)/Raw(load='X'*20)
-
-
 Test case: VF TSO
 =================
 Turn off all hardware offloads on tester machine::