diff mbox series

[V2,1/2] test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan: modify the dmas parameter

Message ID 20221111060825.2421660-1-weix.ling@intel.com (mailing list archive)
State Superseded
Headers
Series modify the dmas parameter |

Commit Message

Ling, WeiX Nov. 11, 2022, 6:08 a.m. UTC 
  From DPDK-22.11, the dmas parameter have changed from
`lcore-dma=[lcore1@0000:00:04.0]` to `dmas=[txq0@0000:00:04.0]` by DPDK
local patch,so modify the dmas parameter.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 ...t_virtio_pmd_interrupt_cbdma_test_plan.rst | 107 ++++++------------
 1 file changed, 37 insertions(+), 70 deletions(-)
diff mbox series

Patch

diff --git a/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst b/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst
index b9c0640d..ab37a4ab 100644
--- a/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst
+++ b/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst
@@ -1,35 +1,6 @@ 
 .. SPDX-License-Identifier: BSD-3-Clause
    Copyright(c) 2022 Intel Corporation
 
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions
-   are met:
-
-   - Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   - Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   - Neither the name of Intel Corporation nor the names of its
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-   OF THE POSSIBILITY OF SUCH DAMAGE.
-
 ====================================================
 vhost/virtio-pmd interrupt mode with cbdma test plan
 ====================================================
@@ -47,8 +18,7 @@  cover virtio 0.95, virtio 1.0 and virtio 1.1.
 2.For split virtqueue virtio-net with multi-queues server mode test, better to use qemu version >= 5.2.0, dut to qemu(v4.2.0~v5.1.0) exist split ring multi-queues reconnection issue.
 3.Kernel version > 4.8.0, mostly linux distribution don't support vfio-noiommu mode by default,
 so testing this case need rebuild kernel to enable vfio-noiommu.
-4.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
-exceed IOMMU's max capability, better to use 1G guest hugepage.
+4.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
 5.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
 
 Prerequisites
@@ -87,26 +57,26 @@  General set up
 Test case
 =========
 
-Test Case1: Basic virtio0.95 interrupt test with 16 queues and cbdma enable
----------------------------------------------------------------------------
+Test Case 1: Basic virtio0.95 interrupt test with 16 queues and cbdma enable
+----------------------------------------------------------------------------
 This case tests virtio0.95 pmd interrupt with l3fwd-power sample when vhost uses the asynchronous operations with CBDMA channels.
 
 1. Bind 16 cbdma channels and one NIC port to vfio-pci, then launch testpmd by below command::
 
     ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 \
-    --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-    -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip --lcore-dma=[lcore1@0000:00:04.0,lcore2@0000:00:04.0,lcore3@0000:00:04.1,lcore3@0000:00:04.2,lcore4@0000:00:04.3,lcore5@0000:00:04.4,lcore6@0000:00:04.5,lcore7@0000:00:04.6,lcore8@0000:00:04.7,\
-	lcore9@0000:80:04.0,lcore10@0000:80:04.1,lcore11@0000:80:04.2,lcore12@0000:80:04.3,lcore13@0000:80:04.4,lcore14@0000:80:04.5,lcore15@0000:80:04.6,lcore16@0000:80:04.7]
+    --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.5;txq6@0000:80:04.6;txq7@0000:80:04.7;txq8@0000:00:04.0;txq9@0000:00:04.1;txq10@0000:00:04.2;txq11@0000:00:04.3;txq12@0000:00:04.4;txq13@0000:00:04.5;txq14@0000:00:04.6;txq15@0000:00:04.7;rxq0@0000:80:04.0;rxq1@0000:80:04.1;rxq2@0000:80:04.2;rxq3@0000:80:04.3;rxq4@0000:80:04.4;rxq5@0000:80:04.5;rxq6@0000:80:04.6;rxq7@0000:80:04.7;rxq8@0000:00:04.0;rxq9@0000:00:04.1;rxq10@0000:00:04.2;rxq11@0000:00:04.3;rxq12@0000:00:04.4;rxq13@0000:00:04.5;rxq14@0000:00:04.6;rxq15@0000:00:04.7]' \
+    -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
 
 2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
 
-    taskset -c 34-35 qemu-system-x86_64 -name us-vhost-vm2 \
+    taskset -c 34-35 qemu-system-x86_64 -name vm1 \
     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-    -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
-    -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=ture,mrg_rxbuf=on,csum=on,mq=on,vectors=40  \
+    -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu20-04.img \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait \
+    -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char1,path=./vhost-net \
+    -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
+    -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=true,mrg_rxbuf=on,csum=on,mq=on,vectors=40  \
     -vnc :11 -daemonize
 
 3. Bind virtio port to vfio-pci::
@@ -118,8 +88,8 @@  This case tests virtio0.95 pmd interrupt with l3fwd-power sample when vhost uses
 4. In VM, launch l3fwd-power sample::
 
     ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0x0ffff -n 4 --log-level='user1,7' \
-    -- -p 1 -P  --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' \
-    --no-numa  --parse-ptype
+    -- -p 1 -P --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' \
+    --no-numa --parse-ptype
 
 5. Send random dest IP packets to host NIC with packet generator, packets will distribute to all queues, check l3fwd-power log that all related cores are waked up.
 
@@ -127,27 +97,26 @@  This case tests virtio0.95 pmd interrupt with l3fwd-power sample when vhost uses
 
 7. Stop the date transmitter, check all related core will be back to sleep status.
 
-Test Case2: Basic virtio-1.0 interrupt test with 4 queues and cbdma enable
---------------------------------------------------------------------------
+Test Case 2: Basic virtio-1.0 interrupt test with 4 queues and cbdma enable
+---------------------------------------------------------------------------
 This case tests virtio1.0 pmd interrupt with l3fwd-power sample when vhost uses the asynchronous operations with CBDMA channels.
 
-1. Bind four cbdma channels and one NIC port to vfio-pci, then launch testpmd by below command::
+1. Bind 2 cbdma channels and one NIC port to vfio-pci, then launch testpmd by below command::
 
     ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 \
-    --vdev 'net_vhost0,iface=vhost-net,queues=4,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
+    --vdev 'net_vhost0,iface=vhost-net,queues=4,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.0;txq2@0000:80:04.0;txq3@0000:80:04.0;rxq0@0000:80:04.1;rxq1@0000:80:04.1;rxq2@0000:80:04.1;rxq3@0000:80:04.1]' \
     -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip --lcore-dma=[lcore3@0000:00:04.0,lcore4@0000:00:04.0,lcore5@0000:00:04.0,lcore5@0000:00:04.1,lcore6@0000:00:04.1]
 
 2. Launch VM1, set queues=4, vectors>=2xqueues+2, mq=on::
 
-    taskset -c 34-35 \
-    qemu-system-x86_64 -name us-vhost-vm2 \
+    taskset -c 34-35 qemu-system-x86_64 -name vm1 \
     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-    -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
-    -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=15  \
-    -vnc :11 -daemonize
+    -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu20-04.img \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait \
+    -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char1,path=./vhost-net \
+    -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
+    -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=15 -vnc :11 -daemonize
 
 3. Bind virtio port to vfio-pci::
 
@@ -165,28 +134,26 @@  This case tests virtio1.0 pmd interrupt with l3fwd-power sample when vhost uses
 
 7. Stop the date transmitter, check all related core will be back to sleep status.
 
-Test Case3: Basic virtio-1.1 interrupt test with 16 queues and cbdma enable
------------------------------------------------------------------------------
+Test Case 3: Basic virtio-1.1 interrupt test with 16 queues and cbdma enable
+----------------------------------------------------------------------------
 This case tests packed ring virtio-pmd interrupt with l3fwd-power sample when vhost uses the asynchronous operations with CBDMA channels.
 
-1. Bind 16 cbdma channels ports and one NIC port to vfio-pci, then launch testpmd by below command::
+1. Bind 4 cbdma channels ports and one NIC port to vfio-pci, then launch testpmd by below command::
 
     ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 \
-    --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-    -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip --lcore-dma=[lcore1@0000:00:04.0,lcore2@0000:00:04.0,lcore3@0000:00:04.1,lcore3@0000:00:04.2,lcore4@0000:00:04.3,lcore5@0000:00:04.4,lcore6@0000:00:04.5,lcore7@0000:00:04.6,lcore8@0000:00:04.7,\
-	lcore9@0000:80:04.0,lcore10@0000:80:04.1,lcore11@0000:80:04.2,lcore12@0000:80:04.3,lcore13@0000:80:04.4,lcore14@0000:80:04.5,lcore15@0000:80:04.6,lcore16@0000:80:04.7]
+    --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.0;txq2@0000:80:04.0;txq3@0000:80:04.0;txq4@0000:80:04.1;txq5@0000:80:04.1;txq6@0000:80:04.1;txq7@0000:80:04.1;txq8@0000:80:04.2;txq9@0000:80:04.2;txq10@0000:80:04.2;txq11@0000:80:04.2;txq12@0000:80:04.3;txq13@0000:80:04.3;txq14@0000:80:04.3;txq15@0000:80:04.3;rxq0@0000:80:04.0;rxq1@0000:80:04.0;rxq2@0000:80:04.0;rxq3@0000:80:04.0;rxq4@0000:80:04.1;rxq5@0000:80:04.1;rxq6@0000:80:04.1;rxq7@0000:80:04.1;rxq8@0000:80:04.2;rxq9@0000:80:04.2;rxq10@0000:80:04.2;rxq11@0000:80:04.2;rxq12@0000:80:04.3;rxq13@0000:80:04.3;rxq14@0000:80:04.3;rxq15@0000:80:04.3]' \
+    -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
 
 2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
 
-    taskset -c 34-35 \
-    qemu-system-x86_64 -name us-vhost-vm2 \
+    taskset -c 34-35 qemu-system-x86_64 -name us-vhost-vm1 \
     -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-    -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
-    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
-    -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
-    -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=40,packed=on  \
-    -vnc :11 -daemonize
+    -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu20-04.img \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait \
+    -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char1,path=./vhost-net \
+    -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
+    -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=40,packed=on -vnc :11 -daemonize
 
 3. Bind virtio port to vfio-pci::