diff mbox series

[V1,1/2] test_plans/vm2vm_virtio_net_perf_dsa: modify the dmas prameter

Message ID 20221228090350.3623074-1-weix.ling@intel.com (mailing list archive)
State Accepted
Headers
Series modify dmas prameter and upload testsuite |

Commit Message

Ling, WeiX Dec. 28, 2022, 9:03 a.m. UTC 
  Modify the dmas parameter in testplan by the DPDK local path changed.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 .../vm2vm_virtio_net_perf_dsa_test_plan.rst   | 309 +++++++++---------
 1 file changed, 162 insertions(+), 147 deletions(-)
diff mbox series

Patch

diff --git a/test_plans/vm2vm_virtio_net_perf_dsa_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_dsa_test_plan.rst
index 6372240b..0e742387 100644
--- a/test_plans/vm2vm_virtio_net_perf_dsa_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_dsa_test_plan.rst
@@ -1,17 +1,23 @@ 
 .. SPDX-License-Identifier: BSD-3-Clause
    Copyright(c) 2022 Intel Corporation
 
-======================================================
+=====================================================
 VM2VM vhost-user/virtio-net with DSA driver test plan
-======================================================
+=====================================================
 
 Description
 ===========
 
 Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.
-In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
-channels and one DMA channel can be shared by multiple vrings at the same time.Vhost enqueue and dequeue operation with CBDMA channels is supported
-in both split and packed ring.
+Asynchronous data path is enabled per tx/rx queue, and users need to specify the DMA device used by the tx/rx queue. Each tx/rx queue
+only supports to use one DMA device, but one DMA device can be shared among multiple tx/rx queues of different vhostpmd ports.
+
+Two PMD parameters are added:
+- dmas:	specify the used DMA device for a tx/rx queue(Default: no queues enable asynchronous data path)
+- dma-ring-size: DMA ring size.(Default: 4096).
+
+Here is an example:
+--vdev 'eth_vhost0,iface=./s0,dmas=[txq0@0000:00.01.0;rxq0@0000:00.01.1],dma-ring-size=4096'
 
 This document provides the test plan for testing the following features when Vhost-user using asynchronous data path with
 DSA driver (kernel IDXD driver and DPDK vfio-pci driver) in VM2VM virtio-net topology.
@@ -32,6 +38,7 @@  Note:
 exceed IOMMU's max capability, better to use 1G guest hugepage.
 4.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
 
+
 Prerequisites
 =============
 
@@ -95,7 +102,7 @@  Common steps
 2. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
 
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
-	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq> <numDevices>
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
 
 .. note::
 
@@ -113,7 +120,7 @@  Common steps
 	Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq1.0 wq1.1 wq1.2 wq1.3"
 
 Test Case 1: VM2VM vhost-user/virtio-net split ring test TSO with dsa dpdk driver
------------------------------------------------------------------------------------
+---------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path 
 by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 
@@ -124,9 +131,9 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 2. Launch the Vhost testpmd by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=2 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@0000:e7:01.0-q0;rxq0@0000:e7:01.0-q0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@0000:e7:01.0-q1;rxq0@0000:e7:01.0-q1]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1
 	testpmd>start
 
 3. Launch VM1 and VM2 with split ring mergeable path and tso on::
@@ -155,13 +162,13 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 
 4. On VM1, set virtio device IP and run arp protocal::
 
-	<VM1># ifconfig ens5 1.1.1.2
-	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+	ifconfig ens5 1.1.1.2
+	arp -s 1.1.1.8 52:54:00:00:00:02
 
 5. On VM2, set virtio device IP and run arp protocal::
 
-	<VM2># ifconfig ens5 1.1.1.8
-	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+	ifconfig ens5 1.1.1.8
+	arp -s 1.1.1.2 52:54:00:00:00:01
 
 6. Check the iperf performance between two VMs by below commands::
 
@@ -173,7 +180,7 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 	testpmd>show port xstats all
 
 Test Case 2: VM2VM vhost-user/virtio-net split ring mergeable path 8 queues test with large packet payload with dsa dpdk driver
----------------------------------------------------------------------------------------------------------------------------------
+-------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
 vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 The dynamic change of multi-queues number, iova as VA and PA mode also test.
@@ -185,9 +192,9 @@  The dynamic change of multi-queues number, iova as VA and PA mode also test.
 2. Launch the Vhost testpmd by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q1,lcore4@0000:f1:01.0-q2,lcore5@0000:f1:01.0-q3]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,client=1,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q1;txq3@0000:f1:01.0-q1;txq4@0000:f1:01.0-q2;txq5@0000:f1:01.0-q2;txq6@0000:f1:01.0-q3;txq7@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q1;rxq3@0000:f1:01.0-q1;rxq4@0000:f1:01.0-q2;rxq5@0000:f1:01.0-q2;rxq6@0000:f1:01.0-q3;rxq7@0000:f1:01.0-q3]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,client=1,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q1;txq3@0000:f1:01.0-q1;txq4@0000:f1:01.0-q2;txq5@0000:f1:01.0-q2;txq6@0000:f1:01.0-q3;txq7@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q1;rxq3@0000:f1:01.0-q1;rxq4@0000:f1:01.0-q2;rxq5@0000:f1:01.0-q2;rxq6@0000:f1:01.0-q3;rxq7@0000:f1:01.0-q3]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2 using qemu 7.0.0::
@@ -216,15 +223,15 @@  The dynamic change of multi-queues number, iova as VA and PA mode also test.
 
 4. On VM1, set virtio device IP and run arp protocal::
 
-	<VM1># ethtool -L ens5 combined 8
-	<VM1># ifconfig ens5 1.1.1.2
-	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+	ethtool -L ens5 combined 8
+	ifconfig ens5 1.1.1.2
+	arp -s 1.1.1.8 52:54:00:00:00:02
 
 5. On VM2, set virtio device IP and run arp protocal::
 
-	<VM2># ethtool -L ens5 combined 8
-	<VM2># ifconfig ens5 1.1.1.8
-	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+	ethtool -L ens5 combined 8
+	ifconfig ens5 1.1.1.8
+	arp -s 1.1.1.2 52:54:00:00:00:01
 
 6. Scp 1MB file form VM1 to VM2::
 
@@ -237,11 +244,10 @@  The dynamic change of multi-queues number, iova as VA and PA mode also test.
 
 8. Quit and relaunch vhost w/ diff dsa channels::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4  -a 0000:f6:01.0,max_queues=4 \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
-	--lcore-dma=[lcore2@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore4@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore4@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q0,lcore5@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=8  -a 0000: :01.0,max_queues=8 \
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,legacy-ol-flags=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q1;txq5@0000:f1:01.0-q2;rxq2@0000:f1:01.0-q3;rxq3@0000:f1:01.0-q4;rxq4@0000:f1:01.0-q5;rxq5@0000:f1:01.0-q5;rxq6@0000:f1:01.0-q5;rxq7@0000:f1:01.0-q5]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,legacy-ol-flags=1,dmas=[txq0@0000:f6:01.0-q0;txq1@0000:f6:01.0-q0;txq2@0000:f6:01.0-q0;txq3@0000:f6:01.0-q0;txq4@0000:f6:01.0-q1;txq5@0000:f6:01.0-q2;rxq2@0000:f6:01.0-q3;rxq3@0000:f6:01.0-q4;rxq4@0000:f6:01.0-q5;rxq5@0000:f6:01.0-q5;rxq6@0000:f6:01.0-q5;rxq7@0000:f6:01.0-q5]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 9. Rerun step 6-7.
@@ -249,9 +255,9 @@  The dynamic change of multi-queues number, iova as VA and PA mode also test.
 10. Quit and relaunch vhost w/ iova=pa::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q1,lcore4@0000:f1:01.0-q2,lcore5@0000:f1:01.0-q3]
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q0;txq5@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q1;rxq3@0000:f1:01.0-q1;rxq4@0000:f1:01.0-q1;rxq5@0000:f1:01.0-q1;rxq6@0000:f1:01.0-q1;rxq7@0000:f1:01.0-q1]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0@0000:f1:01.0-q2;txq1@0000:f1:01.0-q2;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q2;txq4@0000:f1:01.0-q2;txq5@0000:f1:01.0-q2;rxq2@0000:f1:01.0-q3;rxq3@0000:f1:01.0-q3;rxq4@0000:f1:01.0-q3;rxq5@0000:f1:01.0-q3;rxq6@0000:f1:01.0-q3;rxq7@0000:f1:01.0-q3]' \
+	--iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 11. Rerun step 6-7.
@@ -274,22 +280,22 @@  The dynamic change of multi-queues number, iova as VA and PA mode also test.
 
 16. Quit vhost ports and relaunch vhost ports with 1 queues::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --no-pci --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=4' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=4'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
-	testpmd>start
+	 <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --no-pci --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=4' \
+	 --vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=4'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+	 testpmd>start
 
 17. On VM1, set virtio device::
 
-	<VM1># ethtool -L ens5 combined 1
+	ethtool -L ens5 combined 1
 
 18. On VM2, set virtio device::
 
-	<VM2># ethtool -L ens5 combined 1
+	ethtool -L ens5 combined 1
 
 19. Rerun step 6-7.
 
 Test Case 3: VM2VM vhost-user/virtio-net split ring non-mergeable path 8 queues test with large packet payload with dsa dpdk driver
-------------------------------------------------------------------------------------------------------------------------------------
+-----------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
 vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 The dynamic change of multi-queues number also test.
@@ -300,10 +306,10 @@  The dynamic change of multi-queues number also test.
 
 2. Launch the Vhost sample by below commands::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore3@0000:f1:01.0-q1,lcore4@0000:f1:01.0-q2,lcore5@0000:f1:01.0-q3]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=8 \
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q1;txq5@0000:f1:01.0-q1;txq6@0000:f1:01.0-q1;txq7@0000:f1:01.0-q1;rxq0@0000:f1:01.0-q2;rxq1@0000:f1:01.0-q2;rxq2@0000:f1:01.0-q2;rxq3@0000:f1:01.0-q2;rxq4@0000:f1:01.0-q3;rxq5@0000:f1:01.0-q3;rxq6@0000:f1:01.0-q3;rxq7@0000:f1:01.0-q3]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:f1:01.0-q4;txq1@0000:f1:01.0-q4;txq2@0000:f1:01.0-q4;txq3@0000:f1:01.0-q4;txq4@0000:f1:01.0-q5;txq5@0000:f1:01.0-q5;txq6@0000:f1:01.0-q5;txq7@0000:f1:01.0-q5;rxq0@0000:f1:01.0-q6;rxq1@0000:f1:01.0-q6;rxq2@0000:f1:01.0-q6;rxq3@0000:f1:01.0-q6;rxq4@0000:f1:01.0-q7;rxq5@0000:f1:01.0-q7;rxq6@0000:f1:01.0-q7;rxq7@0000:f1:01.0-q7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2::
@@ -353,17 +359,17 @@  The dynamic change of multi-queues number also test.
 
 8. Quit vhost ports and relaunch vhost ports w/o dsa channels::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --no-pci --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=8' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --no-pci --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 9. Rerun step 6-7.
 
 10. Quit vhost ports and relaunch vhost ports with 1 queues::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --no-pci --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=8' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
-	testpmd>start
+	 <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --no-pci --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+	 --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+	 testpmd>start
 
 11. On VM1, set virtio device::
 
@@ -376,7 +382,7 @@  The dynamic change of multi-queues number also test.
 13. Rerun step 6-7.
 
 Test Case 4: VM2VM vhost-user/virtio-net packed ring test TSO with dsa dpdk driver
------------------------------------------------------------------------------------
+----------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path 
 by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 
@@ -387,9 +393,9 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=2 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:f1:01.0-q0,lcore4@0000:f1:01.0-q1]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@0000:f1:01.0-q0;rxq0@0000:f1:01.0-q1]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@0000:f1:01.0-q0;rxq0@0000:f1:01.0-q1]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -436,7 +442,7 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 	testpmd>show port xstats all
 
 Test Case 5: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with large packet payload with dsa dpdk driver
----------------------------------------------------------------------------------------------------------------------------------
+--------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
 vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 The dynamic change of multi-queues number also test.
@@ -447,11 +453,10 @@  The dynamic change of multi-queues number also test.
 
 2. Launch the Vhost sample by below commands::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
-	--lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f6:01.0-q0,lcore4@0000:f6:01.0-q1,lcore5@0000:f6:01.0-q2,lcore5@0000:f6:01.0-q3]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=4 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q1;txq3@0000:f1:01.0-q1;txq4@0000:f1:01.0-q2;txq5@0000:f1:01.0-q2;txq6@0000:f1:01.0-q3;txq7@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q1;rxq3@0000:f1:01.0-q1;rxq4@0000:f1:01.0-q2;rxq5@0000:f1:01.0-q2;rxq6@0000:f1:01.0-q3;rxq7@0000:f1:01.0-q3]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q1;txq3@0000:f1:01.0-q1;txq4@0000:f1:01.0-q2;txq5@0000:f1:01.0-q2;txq6@0000:f1:01.0-q3;txq7@0000:f1:01.0-q3;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q1;rxq3@0000:f1:01.0-q1;rxq4@0000:f1:01.0-q2;rxq5@0000:f1:01.0-q2;rxq6@0000:f1:01.0-q3;rxq7@0000:f1:01.0-q3]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -502,7 +507,7 @@  The dynamic change of multi-queues number also test.
 8. Rerun step 6-7 five times.
 
 Test Case 6: VM2VM vhost-user/virtio-net packed ring non-mergeable path 8 queues test with large packet payload with dsa dpdk driver
--------------------------------------------------------------------------------------------------------------------------------------
+------------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
 vm2vm vhost-user/virtio-net packed ring non-mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 The dynamic change of multi-queues number also test.
@@ -513,11 +518,10 @@  The dynamic change of multi-queues number also test.
 
 2. Launch the Vhost sample by below commands::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
-	--lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f1:01.0-q4,lcore4@0000:f1:01.0-q5,lcore5@0000:f1:01.0-q6,lcore5@0000:f1:01.0-q7]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=8 -a 0000:f6:01.0,max_queues=8 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;txq4@0000:f1:01.0-q4;txq5@0000:f1:01.0-q5;rxq2@0000:f1:01.0-q6;rxq3@0000:f1:01.0-q6;rxq4@0000:f1:01.0-q7;rxq5@0000:f1:01.0-q7;rxq6@0000:f1:01.0-q7;rxq7@0000:f1:01.0-q7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq2@0000:f6:01.0-q0;txq3@0000:f6:01.0-q1;txq4@0000:f6:01.0-q2;txq5@0000:f6:01.0-q3;txq6@0000:f6:01.0-q4;txq7@0000:f6:01.0-q5;rxq0@0000:f6:01.0-q6;rxq1@0000:f6:01.0-q6;rxq2@0000:f6:01.0-q7;rxq3@0000:f6:01.0-q7;rxq4@0000:f6:01.0-q7;rxq5@0000:f6:01.0-q7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -531,7 +535,7 @@  The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
 	-chardev socket,id=char0,path=./vhost-net0 \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=off,guest_tso4=off,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
 
 	<dpdk dir># taskset -c 8 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -542,7 +546,7 @@  The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
 	-chardev socket,id=char0,path=./vhost-net1 \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=off,guest_tso4=off,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
 
 4. On VM1, set virtio device IP and run arp protocal::
 
@@ -567,10 +571,11 @@  The dynamic change of multi-queues number also test.
 
 8. Rerun step 6-7 five times.
 
-Test Case 7: VM2VM vhost-user/virtio-net packed ring test TSO with dsa dpdk driver and pa mode
------------------------------------------------------------------------------------------------
+Test Case 7: VM2VM vhost-user/virtio-net packed ring test dma-ring-size with tcp traffic and dsa dpdk driver
+------------------------------------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path 
-by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver and iova as PA mode.
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver
+and the dma ring size is small.
 
 1. Bind 2  dsa device to vfio-pci like common step 1::
 
@@ -579,9 +584,9 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 2. Launch the Vhost sample with PA mode by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=2 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--iova=pa -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:f1:01.0-q0,lcore4@0000:f1:01.0-q1]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@0000:f1:01.0-q0;rxq0@0000:f1:01.0-q0],dma-ring-size=32' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@0000:f1:01.0-q1;rxq0@0000:f1:01.0-q1],dma-ring-size=32' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -627,11 +632,10 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 
 	testpmd>show port xstats all
 
-Test Case 8: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with large packet payload with dsa dpdk driver and pa mode
----------------------------------------------------------------------------------------------------------------------------------------------
+Test Case 8: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with legacy mode with dsa dpdk driver
+-----------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
-vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver
-and iova as PA mode. 
+vm2vm vhost-user/virtio-net packed ring mergeable path with legacy mode when vhost uses the asynchronous enqueue and dequeue operations with dsa dpdk driver.
 
 1. Bind 1 dsa device to vfio-pci like common step 1::
 
@@ -640,10 +644,10 @@  and iova as PA mode.
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=pa -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f1:01.0-q2,lcore3@0000:f1:01.0-q3,lcore4@0000:f1:01.0-q4,lcore4@0000:f1:01.0-q5,lcore5@0000:f1:01.0-q6,lcore5@0000:f1:01.0-q7]
-	testpmd>start
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,legacy-ol-flags=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q1;txq5@0000:f1:01.0-q1;txq6@0000:f1:01.0-q1;txq7@0000:f1:01.0-q1;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q0;rxq3@0000:f1:01.0-q0;rxq4@0000:f1:01.0-q1;rxq5@0000:f1:01.0-q1;rxq6@0000:f1:01.0-q1;rxq7@0000:f1:01.0-q1]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,legacy-ol-flags=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q1;txq5@0000:f1:01.0-q1;txq6@0000:f1:01.0-q1;txq7@0000:f1:01.0-q1;rxq0@0000:f1:01.0-q0;rxq1@0000:f1:01.0-q0;rxq2@0000:f1:01.0-q0;rxq3@0000:f1:01.0-q0;rxq4@0000:f1:01.0-q1;rxq5@0000:f1:01.0-q1;rxq6@0000:f1:01.0-q1;rxq7@0000:f1:01.0-q1]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+    testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
 
@@ -693,7 +697,7 @@  and iova as PA mode.
 8. Rerun step 6-7 five times.
 
 Test Case 9: VM2VM vhost-user/virtio-net split ring test TSO with dsa kernel driver
-------------------------------------------------------------------------------------
+-----------------------------------------------------------------------------------
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path 
 by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous operations with dsa kernel driver.
 
@@ -708,9 +712,9 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous o
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@wq0.0;rxq0@wq0.0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@wq0.0;rxq0@wq0.0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1
 	testpmd>start
 
 3. Launch VM1 and VM2 on socket 1::
@@ -757,7 +761,7 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous o
 	testpmd>show port xstats all
 
 Test Case 10: VM2VM vhost-user/virtio-net split ring mergeable path 8 queues test with large packet payload with dsa kernel driver
------------------------------------------------------------------------------------------------------------------------------------
+----------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
 vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa kernel driver.
 The dynamic change of multi-queues number also test.
@@ -774,10 +778,9 @@  The dynamic change of multi-queues number also test.
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
-	--lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq0.2,lcore2@wq0.3,lcore2@wq0.4,lcore2@wq0.5,lcore3@wq0.6,lcore3@wq0.7,lcore4@wq1.0,lcore4@wq1.1,lcore4@wq1.2,lcore4@wq1.3,lcore4@wq1.4,lcore4@wq1.5,lcore4@wq1.6,lcore5@wq1.7]
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0@wq0.0;txq1@wq0.1;txq2@wq0.2;txq3@wq0.3;txq4@wq0.4;txq5@wq0.5;txq6@wq0.6;txq7@wq0.7;rxq0@wq1.0;rxq1@wq1.1;rxq2@wq1.2;rxq3@wq1.3;rxq4@wq1.4;rxq5@wq1.5;rxq6@wq1.6;rxq7@wq1.7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0@wq1.0;txq1@wq1.1;txq2@wq1.2;txq3@wq1.3;txq4@wq1.4;txq5@wq1.5;txq6@wq1.6;txq7@wq1.7;rxq0@wq0.0;rxq1@wq0.1;rxq2@wq0.2;rxq3@wq0.3;rxq4@wq0.4;rxq5@wq0.5;rxq6@wq0.6;rxq7@wq0.7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2 using qemu::
@@ -828,9 +831,9 @@  The dynamic change of multi-queues number also test.
 8. Quit and relaunch vhost w/ diff dsa channels::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore3@wq0.1,lcore4@wq0.2,lcore5@wq0.3]
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.0;txq3@wq0.0;txq4@wq0.1;txq5@wq0.1;rxq2@wq0.1;rxq3@wq0.1;rxq4@wq0.2;rxq5@wq0.2;rxq6@wq0.2;rxq7@wq0.2]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0@wq0.3;txq1@wq0.3;txq2@wq0.3;txq3@wq0.3;txq4@wq0.4;txq5@wq0.4;rxq2@wq0.4;rxq3@wq0.4;rxq4@wq0.5;rxq5@wq0.5;rxq6@wq0.5;rxq7@wq0.5]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 9. Rerun step 6-7.
@@ -868,7 +871,7 @@  The dynamic change of multi-queues number also test.
 17. Rerun step 6-7.
 
 Test Case 11: VM2VM vhost-user/virtio-net split ring non-mergeable path 8 queues test with large packet payload with dsa kernel driver
----------------------------------------------------------------------------------------------------------------------------------------
+--------------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
 vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa kernel driver.
 The dynamic change of multi-queues number also test.
@@ -885,9 +888,9 @@  The dynamic change of multi-queues number also test.
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq0.4,lcore4@wq0.5,lcore5@wq0.6,lcore5@wq0.7]
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.0;txq3@wq0.0;txq4@wq0.1;txq5@wq0.1;rxq2@wq0.1;rxq3@wq0.1;rxq4@wq0.2;rxq5@wq0.2;rxq6@wq0.2;rxq7@wq0.2]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@wq1.0;txq1@wq1.0;txq2@wq1.0;txq3@wq1.0;txq4@wq1.1;txq5@wq1.1;rxq2@wq1.1;rxq3@wq1.1;rxq4@wq1.2;rxq5@wq1.2;rxq6@wq1.2;rxq7@wq1.2]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2::
@@ -901,7 +904,7 @@  The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
 	-chardev socket,id=char0,path=./vhost-net0,server \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=off,guest_tso4=off,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
 
 	<dpdk dir># taskset -c 8 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -912,7 +915,7 @@  The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
 	-chardev socket,id=char0,path=./vhost-net1,server \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=off,guest_tso4=off,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
 
 4. On VM1, set virtio device IP and run arp protocal::
 
@@ -937,16 +940,16 @@  The dynamic change of multi-queues number also test.
 
 8. Quit vhost ports and relaunch vhost ports w/o dsa channels::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=8' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,legacy-ol-flags=1' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,legacy-ol-flags=1'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 9. Rerun step 6-7.
 
 10. Quit vhost ports and relaunch vhost ports with 1 queues::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=8' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
 	testpmd>start
 
 11. On VM1, set virtio device::
@@ -964,21 +967,20 @@  Test Case 12: VM2VM vhost-user/virtio-net packed ring test TSO with dsa kernel d
 This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path
 by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue and dequeue operations with dsa kernel driver.
 
-1. Bind 2 dsa device to idxd::
+1. Bind 1 dsa device to idxd::
 
 	ls /dev/dsa #check wq configure, reset if exist
 	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
 	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
-	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 2
 	ls /dev/dsa #check wq configure success
 
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0]' \
-	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@wq0.0,lcore4@wq1.0]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0@wq0.0;rxq0@wq0.0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0@wq0.0;rxq0@wq0.0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -1025,24 +1027,24 @@  by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous e
 	testpmd>show port xstats all
 
 Test Case 13: VM2VM vhost-user/virtio-net packed ring mergeable path 8 queues test with large packet payload with dsa kernel driver
--------------------------------------------------------------------------------------------------------------------------------------
+-----------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
 vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa kernel driver.
-The dynamic change of multi-queues number also test.
 
-1. Bind 1 dsa device to idxd like common step 2::
+1. Bind 2 dsa device to idxd like common step 2::
 
 	ls /dev/dsa #check wq configure, reset if exist
 	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 
 	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 1
 
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq0.4,lcore4@wq0.5,lcore5@wq0.6,lcore5@wq0.7]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0@wq0.0;txq1@wq0.1;txq2@wq0.2;txq3@wq0.3;txq4@wq0.4;txq5@wq0.5;rxq2@wq0.2;rxq3@wq0.3;rxq4@wq0.4;rxq5@wq0.5;rxq6@wq0.6;rxq7@wq0.7]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0@wq1.0;txq1@wq1.1;txq2@wq1.2;txq3@wq1.3;txq4@wq1.4;txq5@wq1.5;rxq2@wq1.2;rxq3@wq1.3;rxq4@wq1.4;rxq5@wq1.5;rxq6@wq1.6;rxq7@wq1.7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -1093,9 +1095,10 @@  The dynamic change of multi-queues number also test.
 8. Rerun step 6-7 five times.
 
 Test Case 14: VM2VM vhost-user/virtio-net packed ring non-mergeable path 8 queues test with large packet payload with dsa kernel driver
-----------------------------------------------------------------------------------------------------------------------------------------
+---------------------------------------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
 vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue and dequeue operations with dsa kernel driver.
+The dynamic change of multi-queues number also test.
 
 1. Bind 2 dsa device to vfio-pci like common step 2::
 
@@ -1109,9 +1112,9 @@  vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the async
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3,lcore4@wq1.0,lcore4@wq1.1,lcore5@wq1.2,lcore5@wq1.3]
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,tso=1,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.1;txq3@wq0.1;txq4@wq0.2;txq5@wq0.2;txq6@wq0.3;txq7@wq0.3;rxq0@wq0.0;rxq1@wq0.0;rxq2@wq0.1;rxq3@wq0.1;rxq4@wq0.2;rxq5@wq0.2;rxq6@wq0.3;rxq7@wq0.3]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,tso=1,dmas=[txq0@wq0.0;txq1@wq0.0;txq2@wq0.1;txq3@wq0.1;txq4@wq0.2;txq5@wq0.2;txq6@wq0.3;txq7@wq0.3;rxq0@wq0.0;rxq1@wq0.0;rxq2@wq0.1;rxq3@wq0.1;rxq4@wq0.2;rxq5@wq0.2;rxq6@wq0.3;rxq7@wq0.3]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -1161,11 +1164,11 @@  vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the async
 
 8. Rerun step 6-7 five times.
 
-Test Case 15: VM2VM vhost-user/virtio-net split ring non-mergeable 16 queues test with large packet payload with dsa dpdk and kernel driver
---------------------------------------------------------------------------------------------------------------------------------------------
+Test Case 15: VM2VM vhost-user/virtio-net split ring non-mergeable 16 queues test with Rx/Tx csum in SW
+-------------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
 vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous operations with dsa dpdk
-and kernel driver. The dynamic change of multi-queues number also test.
+and kernel driver and perform SW checksum in Rx/Tx path.. The dynamic change of multi-queues number also test.
 
 1. Bind 2 dsa device to vfio-pci and 2 dsa device to idxd like common step 1-2::
 
@@ -1182,9 +1185,15 @@  and kernel driver. The dynamic change of multi-queues number also test.
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0 -a 0000:f6:01.0  \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@0000:f1:01.0-q1,lcore3@0000:f6:01.0-q0,lcore3@0000:f6:01.0-q1,lcore4@wq0.0,lcore5@wq0.1]
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q0;txq5@0000:f1:01.0-q0;txq6@0000:f1:01.0-q0;txq7@0000:f1:01.0-q0;txq8@0000:f1:01.0-q0;txq9@0000:f1:01.0-q0;txq10@0000:f1:01.0-q0;txq11@0000:f1:01.0-q0;txq12@0000:f1:01.0-q0;txq13@0000:f1:01.0-q0;txq14@0000:f1:01.0-q0;txq15@0000:f1:01.0-q0;rxq0@wq0.0;rxq1@wq0.0;rxq2@wq0.0;rxq3@wq0.0;rxq4@wq0.0;rxq5@wq0.0;rxq6@wq0.0;rxq7@wq0.0;rxq8@wq0.0;rxq9@wq0.0;rxq10@wq0.0;rxq11@wq0.0;rxq12@wq0.0;rxq13@wq0.0;rxq14@wq0.0;rxq15@wq0.0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;txq4@0000:f1:01.0-q4;txq5@0000:f1:01.0-q5;txq6@0000:f1:01.0-q6;txq7@0000:f1:01.0-q7;txq8@0000:f6:01.0-q0;txq9@0000:f6:01.0-q1;txq10@0000:f6:01.0-q2;txq11@0000:f6:01.0-q3;txq12@0000:f6:01.0-q4;txq13@0000:f6:01.0-q5;txq14@0000:f6:01.0-q6;txq15@0000:f6:01.0-q7;rxq0@wq0.0;rxq1@wq0.1;rxq2@wq0.2;rxq3@wq0.3;rxq4@wq0.4;rxq5@wq0.5;rxq6@wq0.6;rxq7@wq0.7;rxq8@wq1.0;rxq9@wq1.1;rxq10@wq1.2;rxq11@wq1.3;rxq12@wq1.4;rxq13@wq1.5;rxq14@wq1.6;rxq15@wq1.7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+	testpmd>set fwd csum
+	testpmd>stop
+	testpmd>port stop all
+	testpmd>port config 0 tx_offload tcp_cksum on
+	testpmd>port config 1 tx_offload tcp_cksum on
+	testpmd>port start all
 	testpmd>start
 
 3. Launch VM1 and VM2::
@@ -1198,7 +1207,7 @@  and kernel driver. The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
 	-chardev socket,id=char0,path=./vhost-net0,server \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=off,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
 
 	<dpdk dir># taskset -c 8 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -1209,7 +1218,7 @@  and kernel driver. The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
 	-chardev socket,id=char0,path=./vhost-net1,server \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=off,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
 
 4. On VM1, set virtio device IP and run arp protocal::
 
@@ -1234,10 +1243,11 @@  and kernel driver. The dynamic change of multi-queues number also test.
 
 8. Quit vhost ports and relaunch vhost ports w/ diff dsa channels::
 
-	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=2 \
-	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
-	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,tso=1,dmas=[txq10;txq11;txq12;txq13;txq14;txq15;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@wq0.0,lcore3@0000:f1:01.0-q1,lcore3@wq0.1,lcore4@wq1.0,lcore5@wq1.1]
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=8 \
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q2;txq5@0000:f1:01.0-q3;rxq2@0000:f1:01.0-q4;rxq3@0000:f1:01.0-q5;rxq4@0000:f1:01.0-q6;rxq5@0000:f1:01.0-q6;rxq6@0000:f1:01.0-q6;rxq7@0000:f1:01.0-q6]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,tso=1,dmas=[txq12@wq1.0;txq13@wq1.0;txq14@wq1.0;txq15@wq1.0;rxq12@wq1.1;rxq13@wq1.1;rxq14@wq1.1;rxq15@wq1.1]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+	testpmd>set fwd csum
 	testpmd>start
 
 9. rerun step 6-7.
@@ -1246,6 +1256,7 @@  and kernel driver. The dynamic change of multi-queues number also test.
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=16' \
 	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=16'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+	testpmd>set fwd csum
 	testpmd>start
 
 11. Rerun step 6-7.
@@ -1254,6 +1265,7 @@  and kernel driver. The dynamic change of multi-queues number also test.
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,tso=1,queues=8' \
 	--vdev 'net_vhost1,iface=vhost-net1,client=1,tso=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+	testpmd>set fwd csum
 	testpmd>start
 
 13. On VM1, set virtio device::
@@ -1266,11 +1278,11 @@  and kernel driver. The dynamic change of multi-queues number also test.
 
 15. Rerun step 6-7.
 
-Test Case 16: VM2VM vhost-user/virtio-net packed ring mergeable 16 queues test with large packet payload with dsa dpdk and kernel driver
-------------------------------------------------------------------------------------------------------------------------------------------
+Test Case 16: VM2VM vhost-user/virtio-net packed ring mergeable 16 queues test with Rx/Tx csum in SW
+----------------------------------------------------------------------------------------------------
 This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
 vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous operations with dsa dpdk
-and kernel driver. The dynamic change of multi-queues number also test.
+and kernel driver and perform SW checksum in Rx/Tx path.. The dynamic change of multi-queues number also test.
 
 1. Bind 2 dsa device to vfio-pci and 2 dsa device to idxd like common step 1-2::
 
@@ -1279,16 +1291,22 @@  and kernel driver. The dynamic change of multi-queues number also test.
 	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 
 	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 
 	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f1:01.0 f6:01.0
-	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
-	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 1
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 1
 	ls /dev/dsa #check wq configure success
 
 2. Launch the Vhost sample by below commands::
 
 	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:f1:01.0,max_queues=1 -a 0000:f6:01.0,max_queues=1 \
-	--vdev 'net_vhost0,iface=vhost-net0,queues=16,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-	--vdev 'net_vhost1,iface=vhost-net1,queues=16,tso=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
-	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --lcore-dma=[lcore2@0000:f1:01.0-q0,lcore2@wq0.0,lcore3@0000:f6:01.0-q0,lcore3@wq0.1,lcore4@wq1.0,lcore5@wq1.1]
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q0;txq2@0000:f1:01.0-q0;txq3@0000:f1:01.0-q0;txq4@0000:f1:01.0-q0;txq5@0000:f1:01.0-q0;txq6@0000:f1:01.0-q0;txq7@0000:f1:01.0-q0;txq8@0000:f1:01.0-q0;txq9@0000:f1:01.0-q0;txq10@0000:f1:01.0-q0;txq11@0000:f1:01.0-q0;txq12@0000:f1:01.0-q0;txq13@0000:f1:01.0-q0;txq14@0000:f1:01.0-q0;txq15@0000:f1:01.0-q0;rxq0@wq0.0;rxq1@wq0.0;rxq2@wq0.0;rxq3@wq0.0;rxq4@wq0.0;rxq5@wq0.0;rxq6@wq0.0;rxq7@wq0.0;rxq8@wq0.0;rxq9@wq0.0;rxq10@wq0.0;rxq11@wq0.0;rxq12@wq0.0;rxq13@wq0.0;rxq14@wq0.0;rxq15@wq0.0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,tso=1,dmas=[txq0@0000:f1:01.0-q0;txq1@0000:f1:01.0-q1;txq2@0000:f1:01.0-q2;txq3@0000:f1:01.0-q3;txq4@0000:f1:01.0-q4;txq5@0000:f1:01.0-q5;txq6@0000:f1:01.0-q6;txq7@0000:f1:01.0-q7;txq8@0000:f6:01.0-q0;txq9@0000:f6:01.0-q1;txq10@0000:f6:01.0-q2;txq11@0000:f6:01.0-q3;txq12@0000:f6:01.0-q4;txq13@0000:f6:01.0-q5;txq14@0000:f6:01.0-q6;txq15@0000:f6:01.0-q7;rxq0@wq0.0;rxq1@wq0.1;rxq2@wq0.2;rxq3@wq0.3;rxq4@wq0.4;rxq5@wq0.5;rxq6@wq0.6;rxq7@wq0.7;rxq8@wq1.0;rxq9@wq1.1;rxq10@wq1.2;rxq11@wq1.3;rxq12@wq1.4;rxq13@wq1.5;rxq14@wq1.6;rxq15@wq1.7]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+	testpmd>set fwd csum
+	testpmd>stop
+	testpmd>port stop all
+	testpmd>port config 0 tx_offload tcp_cksum on
+	testpmd>port config 1 tx_offload tcp_cksum on
+	testpmd>port start all
 	testpmd>start
 
 3. Launch VM1 and VM2 with qemu::
@@ -1302,7 +1320,7 @@  and kernel driver. The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
 	-chardev socket,id=char0,path=./vhost-net0 \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=off,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
 
 	<dpdk dir># taskset -c 8 /usr/local/qemu-7.0.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
 	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -1313,19 +1331,19 @@  and kernel driver. The dynamic change of multi-queues number also test.
 	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
 	-chardev socket,id=char0,path=./vhost-net1 \
 	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
-	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=off,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
 
 4. On VM1, set virtio device IP and run arp protocal::
 
-	<VM1># ethtool -L ens5 combined 16
-	<VM1># ifconfig ens5 1.1.1.2
-	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+	ethtool -L ens5 combined 16
+	ifconfig ens5 1.1.1.2
+	arp -s 1.1.1.8 52:54:00:00:00:02
 
 5. On VM2, set virtio device IP and run arp protocal::
 
-	<VM2># ethtool -L ens5 combined 16
-	<VM2># ifconfig ens5 1.1.1.8
-	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+	ethtool -L ens5 combined 16
+	ifconfig ens5 1.1.1.8
+	arp -s 1.1.1.2 52:54:00:00:00:01
 
 6. Scp 1MB file form VM1 to VM2::
 
@@ -1337,6 +1355,3 @@  and kernel driver. The dynamic change of multi-queues number also test.
 	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
 
 8. Rerun step 6-7 five times.
-
-
-