[v2,10/12] app/testpmd: remove atomic operations for port status
Checks
Commit Message
The port_status changes do not need to be handled
atomically, as they are modified during initialization
or through the testpmd prompt instead of multiple
threads.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
---
app/test-pmd/testpmd.c | 58 ++++++++++++++++++++++--------------------
1 file changed, 31 insertions(+), 27 deletions(-)
Comments
<snip>
>
> The port_status changes do not need to be handled atomically, as they are
> modified during initialization or through the testpmd prompt instead of
> multiple threads.
>
> Signed-off-by: Joyce Kong <joyce.kong@arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> ---
> app/test-pmd/testpmd.c | 58 ++++++++++++++++++++++--------------------
> 1 file changed, 31 insertions(+), 27 deletions(-)
>
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> a66dfb297c..ed472cacd2 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -36,7 +36,6 @@
> #include <rte_alarm.h>
> #include <rte_per_lcore.h>
> #include <rte_lcore.h>
> -#include <rte_atomic.h>
> #include <rte_branch_prediction.h>
> #include <rte_mempool.h>
> #include <rte_malloc.h>
> @@ -2521,9 +2520,9 @@ setup_hairpin_queues(portid_t pi, portid_t p_pi,
> uint16_t cnt_pi)
> continue;
>
> /* Fail to setup rx queue, return */
> - if (rte_atomic16_cmpset(&(port->port_status),
> - RTE_PORT_HANDLING,
> - RTE_PORT_STOPPED) == 0)
> + if (port->port_status == RTE_PORT_HANDLING)
> + port->port_status = RTE_PORT_STOPPED;
> + else
> fprintf(stderr,
> "Port %d can not be set back to stopped\n",
> pi);
> fprintf(stderr, "Fail to configure port %d hairpin queues\n",
> @@ -2544,9 +2543,9 @@ setup_hairpin_queues(portid_t pi, portid_t p_pi,
> uint16_t cnt_pi)
> continue;
>
> /* Fail to setup rx queue, return */
> - if (rte_atomic16_cmpset(&(port->port_status),
> - RTE_PORT_HANDLING,
> - RTE_PORT_STOPPED) == 0)
> + if (port->port_status == RTE_PORT_HANDLING)
> + port->port_status = RTE_PORT_STOPPED;
> + else
> fprintf(stderr,
> "Port %d can not be set back to stopped\n",
> pi);
> fprintf(stderr, "Fail to configure port %d hairpin queues\n",
> @@ -2729,8 +2728,9 @@ start_port(portid_t pid)
>
> need_check_link_status = 0;
> port = &ports[pi];
> - if (rte_atomic16_cmpset(&(port->port_status),
> RTE_PORT_STOPPED,
> - RTE_PORT_HANDLING) == 0)
> {
> + if (port->port_status == RTE_PORT_STOPPED)
> + port->port_status = RTE_PORT_HANDLING;
> + else {
> fprintf(stderr, "Port %d is now not stopped\n", pi);
> continue;
> }
> @@ -2766,8 +2766,9 @@ start_port(portid_t pid)
> nb_txq + nb_hairpinq,
> &(port->dev_conf));
> if (diag != 0) {
> - if (rte_atomic16_cmpset(&(port-
> >port_status),
> - RTE_PORT_HANDLING, RTE_PORT_STOPPED)
> == 0)
> + if (port->port_status ==
> RTE_PORT_HANDLING)
> + port->port_status =
> RTE_PORT_STOPPED;
> + else
> fprintf(stderr,
> "Port %d can not be set back
> to stopped\n",
> pi);
> @@ -2828,9 +2829,9 @@ start_port(portid_t pid)
> continue;
>
> /* Fail to setup tx queue, return */
> - if (rte_atomic16_cmpset(&(port-
> >port_status),
> -
> RTE_PORT_HANDLING,
> - RTE_PORT_STOPPED)
> == 0)
> + if (port->port_status ==
> RTE_PORT_HANDLING)
> + port->port_status =
> RTE_PORT_STOPPED;
> + else
> fprintf(stderr,
> "Port %d can not be set back
> to stopped\n",
> pi);
> @@ -2880,9 +2881,9 @@ start_port(portid_t pid)
> continue;
>
> /* Fail to setup rx queue, return */
> - if (rte_atomic16_cmpset(&(port-
> >port_status),
> -
> RTE_PORT_HANDLING,
> - RTE_PORT_STOPPED)
> == 0)
> + if (port->port_status ==
> RTE_PORT_HANDLING)
> + port->port_status =
> RTE_PORT_STOPPED;
> + else
> fprintf(stderr,
> "Port %d can not be set back
> to stopped\n",
> pi);
> @@ -2917,16 +2918,18 @@ start_port(portid_t pid)
> pi, rte_strerror(-diag));
>
> /* Fail to setup rx queue, return */
> - if (rte_atomic16_cmpset(&(port->port_status),
> - RTE_PORT_HANDLING, RTE_PORT_STOPPED)
> == 0)
> + if (port->port_status == RTE_PORT_HANDLING)
> + port->port_status = RTE_PORT_STOPPED;
> + else
> fprintf(stderr,
> "Port %d can not be set back to
> stopped\n",
> pi);
> continue;
> }
>
> - if (rte_atomic16_cmpset(&(port->port_status),
> - RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
> + if (port->port_status == RTE_PORT_HANDLING)
> + port->port_status = RTE_PORT_STARTED;
> + else
> fprintf(stderr, "Port %d can not be set into started\n",
> pi);
>
> @@ -3028,8 +3031,9 @@ stop_port(portid_t pid)
> }
>
> port = &ports[pi];
> - if (rte_atomic16_cmpset(&(port->port_status),
> RTE_PORT_STARTED,
> - RTE_PORT_HANDLING) == 0)
> + if (port->port_status == RTE_PORT_STARTED)
> + port->port_status = RTE_PORT_HANDLING;
> + else
> continue;
>
> if (hairpin_mode & 0xf) {
> @@ -3055,8 +3059,9 @@ stop_port(portid_t pid)
> RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port
> %u\n",
> pi);
>
> - if (rte_atomic16_cmpset(&(port->port_status),
> - RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
> + if (port->port_status == RTE_PORT_HANDLING)
> + port->port_status = RTE_PORT_STOPPED;
> + else
> fprintf(stderr, "Port %d can not be set into
> stopped\n",
> pi);
> need_check_link_status = 1;
> @@ -3119,8 +3124,7 @@ close_port(portid_t pid)
> }
>
> port = &ports[pi];
> - if (rte_atomic16_cmpset(&(port->port_status),
> - RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
> + if (port->port_status == RTE_PORT_CLOSED) {
> fprintf(stderr, "Port %d is already closed\n", pi);
> continue;
> }
> --
> 2.25.1
@@ -36,7 +36,6 @@
#include <rte_alarm.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
-#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
@@ -2521,9 +2520,9 @@ setup_hairpin_queues(portid_t pi, portid_t p_pi, uint16_t cnt_pi)
continue;
/* Fail to setup rx queue, return */
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING,
- RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr,
"Port %d can not be set back to stopped\n", pi);
fprintf(stderr, "Fail to configure port %d hairpin queues\n",
@@ -2544,9 +2543,9 @@ setup_hairpin_queues(portid_t pi, portid_t p_pi, uint16_t cnt_pi)
continue;
/* Fail to setup rx queue, return */
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING,
- RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr,
"Port %d can not be set back to stopped\n", pi);
fprintf(stderr, "Fail to configure port %d hairpin queues\n",
@@ -2729,8 +2728,9 @@ start_port(portid_t pid)
need_check_link_status = 0;
port = &ports[pi];
- if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
- RTE_PORT_HANDLING) == 0) {
+ if (port->port_status == RTE_PORT_STOPPED)
+ port->port_status = RTE_PORT_HANDLING;
+ else {
fprintf(stderr, "Port %d is now not stopped\n", pi);
continue;
}
@@ -2766,8 +2766,9 @@ start_port(portid_t pid)
nb_txq + nb_hairpinq,
&(port->dev_conf));
if (diag != 0) {
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr,
"Port %d can not be set back to stopped\n",
pi);
@@ -2828,9 +2829,9 @@ start_port(portid_t pid)
continue;
/* Fail to setup tx queue, return */
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING,
- RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr,
"Port %d can not be set back to stopped\n",
pi);
@@ -2880,9 +2881,9 @@ start_port(portid_t pid)
continue;
/* Fail to setup rx queue, return */
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING,
- RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr,
"Port %d can not be set back to stopped\n",
pi);
@@ -2917,16 +2918,18 @@ start_port(portid_t pid)
pi, rte_strerror(-diag));
/* Fail to setup rx queue, return */
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr,
"Port %d can not be set back to stopped\n",
pi);
continue;
}
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STARTED;
+ else
fprintf(stderr, "Port %d can not be set into started\n",
pi);
@@ -3028,8 +3031,9 @@ stop_port(portid_t pid)
}
port = &ports[pi];
- if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
- RTE_PORT_HANDLING) == 0)
+ if (port->port_status == RTE_PORT_STARTED)
+ port->port_status = RTE_PORT_HANDLING;
+ else
continue;
if (hairpin_mode & 0xf) {
@@ -3055,8 +3059,9 @@ stop_port(portid_t pid)
RTE_LOG(ERR, EAL, "rte_eth_dev_stop failed for port %u\n",
pi);
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
+ if (port->port_status == RTE_PORT_HANDLING)
+ port->port_status = RTE_PORT_STOPPED;
+ else
fprintf(stderr, "Port %d can not be set into stopped\n",
pi);
need_check_link_status = 1;
@@ -3119,8 +3124,7 @@ close_port(portid_t pid)
}
port = &ports[pi];
- if (rte_atomic16_cmpset(&(port->port_status),
- RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
+ if (port->port_status == RTE_PORT_CLOSED) {
fprintf(stderr, "Port %d is already closed\n", pi);
continue;
}