[V1] tests/cvl_fdir: add mark id
Checks
Commit Message
after the packet comes in, it hits the switch rule first and then the fdir rule. the final action
is the superposition of the two. the priority of switch is higher than fdir, so it goes to the
switch queue, but it still contains the fdir mark action
Signed-off-by: Jiale Song <songx.jiale@intel.com>
---
test_plans/cvl_fdir_test_plan.rst | 4 ++--
tests/TestSuite_cvl_fdir.py | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
Comments
> -----Original Message-----
> From: Jiale Song <songx.jiale@intel.com>
> Sent: 2021年11月12日 16:03
> To: dts@dpdk.org
> Cc: Jiale, SongX <songx.jiale@intel.com>
> Subject: [dts] [PATCH V1] tests/cvl_fdir: add mark id
>
> after the packet comes in, it hits the switch rule first and then the fdir rule. the
> final action is the superposition of the two. the priority of switch is higher than
> fdir, so it goes to the switch queue, but it still contains the fdir mark action
>
> Signed-off-by: Jiale Song <songx.jiale@intel.com>
Applied, thanks
@@ -3589,7 +3589,7 @@ set "--log-level=ice,7", then check::
sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.20",dst="192.168.0.21") /UDP(sport=22, dport=23)/ Raw('x' * 80)],iface="enp175s0f0", count=10)
the two packets are both redirected to queue 1 with mark ID 1.
- then create MAC_IPV4_UDP flow, it is set to switch filter::
+ then create MAC_IPV4_UDP flow, it is set to switch filter with mark ID 1::
flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 2 / end
@@ -3610,7 +3610,7 @@ set "--log-level=ice,7", then check::
flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / end actions queue index 1 / end
- send same packet, it is redirected to queue 1, because the packet match switch filter first.
+ send same packet, it is redirected to queue 1 with mark ID 1, because the packet match switch filter first.
Test case: count/query
@@ -3007,7 +3007,7 @@ class TestCVLFdir(TestCase):
out = self.send_pkts_getouput(pkts=pkts[0])
rfc.check_mark(out, pkt_num=1, check_param={"port_id": 0, "queue": 1,"mark_id":1}, stats=True)
out = self.send_pkts_getouput(pkts=pkts[1])
- rfc.check_mark(out, pkt_num=1, check_param={"port_id": 0, "queue": 2}, stats=True)
+ rfc.check_mark(out, pkt_num=1, check_param={"port_id": 0, "queue": 2,"mark_id":1}, stats=True)
rule3 = "flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / udp src is 22 dst is 23 / end actions queue index 2 / mark id 1 / end"
rule4 = "flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.21 / end actions queue index 1 / end"